[OpenWrt-Devel] ipq806x: add support for Netgear D7800

Message ID	6c4137f2b3f726736a2da6d0b9e7c7f4@alumnux.com
State	Superseded
Headers	show Return-Path: <openwrt-devel-bounces@lists.openwrt.org> MIME-Version: 1.0 Date: Thu, 24 Dec 2015 15:51:39 +0530 From: Tathagata Das <tathagata@alumnux.com> To: openwrt-devel@lists.openwrt.org Message-ID: <6c4137f2b3f726736a2da6d0b9e7c7f4@alumnux.com> User-Agent: Roundcube Webmail/1.1.2 Subject: [OpenWrt-Devel] [Patch] ipq806x: add support for Netgear D7800 Precedence: list Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Errors-To: openwrt-devel-bounces@lists.openwrt.org Sender: "openwrt-devel" <openwrt-devel-bounces@lists.openwrt.org>

Tathagata Das Dec. 24, 2015, 10:21 a.m. UTC

Add support for the Netgear D7800 and build appropriate sysupgrade and 
factory images.

Known issues:
. USB ports are not working
. DSL is not added

Signed-off-by: Tathagata Das <tathagata@alumnux.com>

----

> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001
 From: Tathagata Das <tathagata@alumnux.com>
Date: Thu, 24 Dec 2015 09:44:01 +0530
Subject: [PATCH] Added support for Netgear D7800
  Signed-off-by: Tathagata Das <tathagata@alumnux.com>

---
  .../linux/ipq806x/base-files/etc/board.d/01_leds   |    1 +
  .../ipq806x/base-files/etc/board.d/02_network      |    1 +
  target/linux/ipq806x/base-files/lib/ipq806x.sh     |    3 +
  .../ipq806x/base-files/lib/upgrade/platform.sh     |    2 +
  target/linux/ipq806x/image/Makefile                |   13 +-
  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch |  381 
++++++++++++++++++++
  target/linux/ipq806x/profiles/netgear.mk           |   14 +
  7 files changed, 414 insertions(+), 1 deletions(-)
  create mode 100644 
target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch

John Crispin Dec. 24, 2015, 1:18 p.m. UTC | #1

Hi,

your mail client replaced all tabs with spaces.

please consider using git to send patches. it will save you a lot of time.

	John

On 24/12/2015 11:21, Tathagata Das wrote:
> Add support for the Netgear D7800 and build appropriate sysupgrade and
> factory images.
> 
> Known issues:
> . USB ports are not working
> . DSL is not added
> 
> Signed-off-by: Tathagata Das <tathagata@alumnux.com>
> 
> ----
> 
>> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001
> From: Tathagata Das <tathagata@alumnux.com>
> Date: Thu, 24 Dec 2015 09:44:01 +0530
> Subject: [PATCH] Added support for Netgear D7800
>  Signed-off-by: Tathagata Das <tathagata@alumnux.com>
> 
> ---
>  .../linux/ipq806x/base-files/etc/board.d/01_leds   |    1 +
>  .../ipq806x/base-files/etc/board.d/02_network      |    1 +
>  target/linux/ipq806x/base-files/lib/ipq806x.sh     |    3 +
>  .../ipq806x/base-files/lib/upgrade/platform.sh     |    2 +
>  target/linux/ipq806x/image/Makefile                |   13 +-
>  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch |  381
> ++++++++++++++++++++
>  target/linux/ipq806x/profiles/netgear.mk           |   14 +
>  7 files changed, 414 insertions(+), 1 deletions(-)
>  create mode 100644
> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index 07b5b06..b32c1cc 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -11,6 +11,7 @@ board_config_update
>  board=$(ipq806x_board_name)
> 
>  case "$board" in
> +d7800 |\
>  r7500)
>      ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>      ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
> b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 1302a55..6e18297 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
> 
>  case "$board" in
>  ap148 |\
> +d7800 |\
>  r7500)
>      ucidef_add_switch "switch0" \
>          "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> index 5b27bde..be48b9f 100644
> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> @@ -20,6 +20,9 @@ ipq806x_board_detect() {
>      *"DB149")
>          name="db149"
>          ;;
> +    *"D7800")
> +        name="d7800"
> +        ;;
>      *"R7500")
>          name="r7500"
>          ;;
> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> index c0e19a1..2400376 100644
> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> @@ -7,6 +7,7 @@ platform_check_image() {
> 
>      case "$board" in
>      AP148 |\
> +    d7800 |\
>      r7500)
>          nand_do_platform_check $board $1
>          return $?;
> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
> 
>      case "$board" in
>      AP148 |\
> +    d7800 |\
>      r7500)
>          nand_do_upgrade "$1"
>          ;;
> diff --git a/target/linux/ipq806x/image/Makefile
> b/target/linux/ipq806x/image/Makefile
> index 14cf442..8f46af8 100644
> --- a/target/linux/ipq806x/image/Makefile
> +++ b/target/linux/ipq806x/image/Makefile
> @@ -121,6 +121,17 @@ define Device/R7500
>      BOARD_NAME := r7500
>  endef
> 
> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
> +define Device/D7800
> +    $(call Device/DniImage)
> +    DEVICE_DTS := qcom-ipq8064-d7800
> +    KERNEL_SIZE := 2097152
> +    NETGEAR_BOARD_ID := D7800
> +    NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
> +    BLOCKSIZE := 128KiB
> +    PAGESIZE := 2048
> +    BOARD_NAME := d7800
> +endef
> +
> +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800
> 
>  $(eval $(call BuildImage))
> diff --git
> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> new file mode 100644
> index 0000000..ecc1cff
> --- /dev/null
> +++
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> @@ -0,0 +1,381 @@
> +--- a/arch/arm/boot/dts/Makefile    2015-09-22 18:30:09.033530282 +0530
> ++++ b/arch/arm/boot/dts/Makefile    2015-09-23 17:06:44.892947581 +0530
> +@@ -362,6 +362,7 @@
> +     qcom-ipq8064-ap148.dtb \
> +     qcom-ipq8064-db149.dtb \
> +     qcom-ipq8064-r7500.dtb \
> ++    qcom-ipq8064-d7800.dtb \
> +     qcom-msm8660-surf.dtb \
> +     qcom-msm8960-cdp.dtb \
> +     qcom-msm8974-sony-xperia-honami.dtb
> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    1970-01-01
> 05:30:00.000000000 +0530
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    2015-09-23
> 17:06:45.336947567 +0530
> +@@ -0,0 +1,368 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++    model = "Netgear Nighthawk X4 D7800";
> ++    compatible = "netgear,d7800", "qcom,ipq8064";
> ++
> ++    memory@0 {
> ++        reg = <0x42000000 0xe000000>;
> ++        device_type = "memory";
> ++    };
> ++
> ++    reserved-memory {
> ++        #address-cells = <1>;
> ++        #size-cells = <1>;
> ++        ranges;
> ++        rsvd@41200000 {
> ++            reg = <0x41200000 0x300000>;
> ++            no-map;
> ++        };
> ++    };
> ++
> ++    aliases {
> ++        serial0 = &uart4;
> ++        mdio-gpio0 = &mdio0;
> ++    };
> ++
> ++    chosen {
> ++        bootargs = "rootfstype=squashfs noinitrd";
> ++        linux,stdout-path = "serial0:115200n8";
> ++    };
> ++
> ++    soc {
> ++        pinmux@800000 {
> ++            i2c4_pins: i2c4_pinmux {
> ++                pins = "gpio12", "gpio13";
> ++                function = "gsbi4";
> ++                bias-disable;
> ++            };
> ++
> ++            pcie0_pins: pcie0_pinmux {
> ++                mux {
> ++                    pins = "gpio3";
> ++                    function = "pcie1_rst";
> ++                    drive-strength = <12>;
> ++                    bias-disable;
> ++                };
> ++            };
> ++
> ++            pcie1_pins: pcie1_pinmux {
> ++                mux {
> ++                    pins = "gpio48";
> ++                    function = "pcie2_rst";
> ++                    drive-strength = <12>;
> ++                    bias-disable;
> ++                };
> ++            };
> ++
> ++            nand_pins: nand_pins {
> ++                mux {
> ++                    pins = "gpio34", "gpio35", "gpio36",
> ++                           "gpio37", "gpio38", "gpio39",
> ++                           "gpio40", "gpio41", "gpio42",
> ++                           "gpio43", "gpio44", "gpio45",
> ++                           "gpio46", "gpio47";
> ++                    function = "nand";
> ++                    drive-strength = <10>;
> ++                    bias-disable;
> ++                };
> ++                pullups {
> ++                    pins = "gpio39";
> ++                    bias-pull-up;
> ++                };
> ++                hold {
> ++                    pins = "gpio40", "gpio41", "gpio42",
> ++                           "gpio43", "gpio44", "gpio45",
> ++                           "gpio46", "gpio47";
> ++                    bias-bus-hold;
> ++                };
> ++            };
> ++
> ++            mdio0_pins: mdio0_pins {
> ++                mux {
> ++                    pins = "gpio0", "gpio1";
> ++                    function = "gpio";
> ++                    drive-strength = <8>;
> ++                    bias-disable;
> ++                };
> ++            };
> ++
> ++            rgmii2_pins: rgmii2_pins {
> ++                mux {
> ++                    pins = "gpio27", "gpio28", "gpio29", "gpio30",
> "gpio31", "gpio32",
> ++                           "gpio51", "gpio52", "gpio59", "gpio60",
> "gpio61", "gpio62" ;
> ++                    function = "rgmii2";
> ++                    drive-strength = <8>;
> ++                    bias-disable;
> ++                };
> ++            };
> ++        };
> ++
> ++        gsbi@16300000 {
> ++            qcom,mode = <GSBI_PROT_I2C_UART>;
> ++            status = "ok";
> ++            serial@16340000 {
> ++                status = "ok";
> ++            };
> ++            /*
> ++             * The i2c device on gsbi4 should not be enabled.
> ++             * On ipq806x designs gsbi4 i2c is meant for exclusive
> ++             * RPM usage. Turning this on in kernel manifests as
> ++             * i2c failure for the RPM.
> ++             */
> ++        };
> ++
> ++        sata-phy@1b400000 {
> ++            status = "ok";
> ++        };
> ++
> ++        sata@29000000 {
> ++            status = "ok";
> ++        };
> ++
> ++        phy@100f8800 {        /* USB3 port 1 HS phy */
> ++            status = "ok";
> ++        };
> ++
> ++        phy@100f8830 {        /* USB3 port 1 SS phy */
> ++            status = "ok";
> ++        };
> ++
> ++        phy@110f8800 {        /* USB3 port 0 HS phy */
> ++            status = "ok";
> ++        };
> ++
> ++        phy@110f8830 {        /* USB3 port 0 SS phy */
> ++            status = "ok";
> ++        };
> ++
> ++        usb30@0 {
> ++            status = "ok";
> ++        };
> ++
> ++        usb30@1 {
> ++            status = "ok";
> ++        };
> ++
> ++        pcie0: pci@1b500000 {
> ++            status = "ok";
> ++            reset-gpio = <&qcom_pinmux 3 0>;
> ++            pinctrl-0 = <&pcie0_pins>;
> ++            pinctrl-names = "default";
> ++        };
> ++
> ++        pcie1: pci@1b700000 {
> ++            status = "ok";
> ++            reset-gpio = <&qcom_pinmux 48 0>;
> ++            pinctrl-0 = <&pcie1_pins>;
> ++            pinctrl-names = "default";
> ++        };
> ++
> ++        nand@1ac00000 {
> ++            status = "ok";
> ++
> ++            pinctrl-0 = <&nand_pins>;
> ++            pinctrl-names = "default";
> ++
> ++            nand-ecc-strength = <4>;
> ++            nand-bus-width = <8>;
> ++
> ++            #address-cells = <1>;
> ++            #size-cells = <1>;
> ++
> ++            qcadata@0 {
> ++                label = "qcadata";
> ++                reg = <0x0000000 0x0c80000>;
> ++                read-only;
> ++            };
> ++
> ++            APPSBL@c80000 {
> ++                label = "APPSBL";
> ++                reg = <0x0c80000 0x0500000>;
> ++                read-only;
> ++            };
> ++
> ++            APPSBLENV@1180000 {
> ++                label = "APPSBLENV";
> ++                reg = <0x1180000 0x0080000>;
> ++                read-only;
> ++            };
> ++
> ++            art: art@1200000 {
> ++                label = "art";
> ++                reg = <0x1200000 0x0140000>;
> ++                read-only;
> ++            };
> ++
> ++            artbak: art@1340000 {
> ++                label = "artbak";
> ++                reg = <0x1340000 0x0140000>;
> ++                read-only;
> ++            };
> ++
> ++            kernel@1480000 {
> ++                label = "kernel";
> ++                reg = <0x1480000 0x0200000>;
> ++            };
> ++
> ++            ubi@1680000 {
> ++                label = "ubi";
> ++                reg = <0x1680000 0x1E00000>;
> ++            };
> ++
> ++            netgear@3480000 {
> ++                label = "netgear";
> ++                reg = <0x3480000 0x4480000>;
> ++                read-only;
> ++            };
> ++
> ++            reserve@7900000 {
> ++                label = "reserve";
> ++                reg = <0x7900000 0x0700000>;
> ++                read-only;
> ++            };
> ++
> ++            firmware@1480000 {
> ++                label = "firmware";
> ++                reg = <0x1480000 0x2000000>;
> ++            };
> ++
> ++        };
> ++
> ++        mdio0: mdio {
> ++            compatible = "virtual,mdio-gpio";
> ++            #address-cells = <1>;
> ++            #size-cells = <0>;
> ++            gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++            pinctrl-0 = <&mdio0_pins>;
> ++            pinctrl-names = "default";
> ++
> ++            phy0: ethernet-phy@0 {
> ++                device_type = "ethernet-phy";
> ++                reg = <0>;
> ++                qca,ar8327-initvals = <
> ++                    0x00004 0x7600000   /* PAD0_MODE */
> ++                    0x00008 0x1000000   /* PAD5_MODE */
> ++                    0x0000c 0x80        /* PAD6_MODE */
> ++                    0x000e4 0xaa545     /* MAC_POWER_SEL */
> ++                    0x000e0 0xc74164de  /* SGMII_CTRL */
> ++                    0x0007c 0x4e        /* PORT0_STATUS */
> ++                    0x00094 0x4e        /* PORT6_STATUS */
> ++                    >;
> ++            };
> ++
> ++            phy4: ethernet-phy@4 {
> ++                device_type = "ethernet-phy";
> ++                reg = <4>;
> ++            };
> ++        };
> ++
> ++        gmac1: ethernet@37200000 {
> ++            status = "ok";
> ++            phy-mode = "rgmii";
> ++            phy-handle = <&phy4>;
> ++            qcom,id = <1>;
> ++
> ++            pinctrl-0 = <&rgmii2_pins>;
> ++            pinctrl-names = "default";
> ++
> ++            mtd-mac-address = <&art 6>;
> ++        };
> ++
> ++        gmac2: ethernet@37400000 {
> ++            status = "ok";
> ++            phy-mode = "sgmii";
> ++            qcom,id = <2>;
> ++
> ++            mtd-mac-address = <&art 0>;
> ++
> ++            fixed-link {
> ++                speed = <1000>;
> ++                full-duplex;
> ++            };
> ++        };
> ++    };
> ++
> ++    gpio-keys {
> ++        compatible = "gpio-keys";
> ++
> ++        wifi {
> ++            label = "wifi";
> ++            gpios = <&qcom_pinmux 6 1>;
> ++            linux,code = <KEY_WLAN>;
> ++        };
> ++
> ++        reset {
> ++            label = "reset";
> ++            gpios = <&qcom_pinmux 54 1>;
> ++            linux,code = <KEY_RESTART>;
> ++        };
> ++
> ++        wps {
> ++            label = "wps";
> ++            gpios = <&qcom_pinmux 65 1>;
> ++            linux,code = <KEY_WPS_BUTTON>;
> ++        };
> ++    };
> ++
> ++    gpio-leds {
> ++        compatible = "gpio-leds";
> ++
> ++        usb1 {
> ++            label = "d7800:amber:usb1";
> ++            gpios = <&qcom_pinmux 7 0>;
> ++        };
> ++
> ++        usb3 {
> ++            label = "d7800:amber:usb3";
> ++            gpios = <&qcom_pinmux 8 0>;
> ++        };
> ++
> ++        status {
> ++            label = "d7800:amber:status";
> ++            gpios = <&qcom_pinmux 9 0>;
> ++        };
> ++
> ++        internet {
> ++            label = "d7800:white:internet";
> ++            gpios = <&qcom_pinmux 22 0>;
> ++        };
> ++
> ++        wan {
> ++            label = "d7800:white:wan";
> ++            gpios = <&qcom_pinmux 23 0>;
> ++        };
> ++
> ++        wps {
> ++            label = "d7800:white:wps";
> ++            gpios = <&qcom_pinmux 24 0>;
> ++        };
> ++
> ++        esata {
> ++            label = "d7800:white:esata";
> ++            gpios = <&qcom_pinmux 26 0>;
> ++        };
> ++
> ++        power {
> ++            label = "d7800:white:power";
> ++            gpios = <&qcom_pinmux 53 0>;
> ++            default-state = "on";
> ++        };
> ++
> ++        rfkill {
> ++            label = "d7800:white:rfkill";
> ++            gpios = <&qcom_pinmux 64 0>;
> ++        };
> ++
> ++        wifi5g {
> ++            label = "d7800:white:wifi5g";
> ++            gpios = <&qcom_pinmux 67 0>;
> ++        };
> ++    };
> ++};
> ++
> ++&adm_dma {
> ++    status = "ok";
> ++};
> diff --git a/target/linux/ipq806x/profiles/netgear.mk
> b/target/linux/ipq806x/profiles/netgear.mk
> index 3402f45..e1e7ed2 100644
> --- a/target/linux/ipq806x/profiles/netgear.mk
> +++ b/target/linux/ipq806x/profiles/netgear.mk
> @@ -17,4 +17,18 @@ endef
>  define Profile/R7500/Description
>      Package set for the Netgear Nighthawk X4 R7500.
>  endef
> +
> +define Profile/D7800
> +    NAME:=Netgear Nighthawk X4 D7800
> +    PACKAGES:= \
> +        kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
> +        kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
> +        kmod-ath10k wpad-mini ath10k-firmware-qca99x0
> +endef
> +
> +define Profile/D7800/Description
> +    Package set for the Netgear Nighthawk X4 D7800.
> +endef
> +
>  $(eval $(call Profile,R7500))
> +$(eval $(call Profile,D7800))

John Crispin Dec. 24, 2015, 3:54 p.m. UTC | #2

hi

first format the patch

git format-patch HEAD~1

this will give you your patch as 0001-$some_name.patch

then call this command to send the patch

git send-email --to openwrt-devel@lists.openwrt.org 0001-my_fix.patch

	John

On 24/12/2015 14:31, Tathagata Das wrote:
>  
> 
>  
> 
> I have tried with git -send-email option. But it says command not
> supported. Could you send me the command?
> 
> On 24-12-2015 18:48, John Crispin wrote:
> 
>> Hi,
>>
>> your mail client replaced all tabs with spaces.
>>
>> please consider using git to send patches. it will save you a lot of time.
>>
>>     John
>>
>> On 24/12/2015 11:21, Tathagata Das wrote:
>>> Add support for the Netgear D7800 and build appropriate sysupgrade and
>>> factory images.
>>>
>>> Known issues:
>>> . USB ports are not working
>>> . DSL is not added
>>>
>>> Signed-off-by: Tathagata Das <tathagata@alumnux.com
>>> <mailto:tathagata@alumnux.com>>
>>>
>>> ----
>>>
>>>> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001
>>> From: Tathagata Das <tathagata@alumnux.com
>>> <mailto:tathagata@alumnux.com>>
>>> Date: Thu, 24 Dec 2015 09:44:01 +0530
>>> Subject: [PATCH] Added support for Netgear D7800
>>>  Signed-off-by: Tathagata Das <tathagata@alumnux.com
>>> <mailto:tathagata@alumnux.com>>
>>>
>>> ---
>>>  .../linux/ipq806x/base-files/etc/board.d/01_leds   |    1 +
>>>  .../ipq806x/base-files/etc/board.d/02_network      |    1 +
>>>  target/linux/ipq806x/base-files/lib/ipq806x.sh     |    3 +
>>>  .../ipq806x/base-files/lib/upgrade/platform.sh     |    2 +
>>>  target/linux/ipq806x/image/Makefile                |   13 +-
>>>  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch |  381
>>> ++++++++++++++++++++
>>>  target/linux/ipq806x/profiles/netgear.mk           |   14 +
>>>  7 files changed, 414 insertions(+), 1 deletions(-)
>>>  create mode 100644
>>> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>
>>>
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> index 07b5b06..b32c1cc 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> @@ -11,6 +11,7 @@ board_config_update
>>>  board=$(ipq806x_board_name)
>>>
>>>  case "$board" in
>>> +d7800 |\
>>>  r7500)
>>>      ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>>>      ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> index 1302a55..6e18297 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
>>>
>>>  case "$board" in
>>>  ap148 |\
>>> +d7800 |\
>>>  r7500)
>>>      ucidef_add_switch "switch0" \
>>>          "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1 <mailto:6@eth1>"
>>> "5:wan" "0@eth0 <mailto:0@eth0>"
>>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> index 5b27bde..be48b9f 100644
>>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> @@ -20,6 +20,9 @@ ipq806x_board_detect() {
>>>      *"DB149")
>>>          name="db149"
>>>          ;;
>>> +    *"D7800")
>>> +        name="d7800"
>>> +        ;;
>>>      *"R7500")
>>>          name="r7500"
>>>          ;;
>>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> index c0e19a1..2400376 100644
>>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> @@ -7,6 +7,7 @@ platform_check_image() {
>>>
>>>      case "$board" in
>>>      AP148 |\
>>> +    d7800 |\
>>>      r7500)
>>>          nand_do_platform_check $board $1
>>>          return $?;
>>> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
>>>
>>>      case "$board" in
>>>      AP148 |\
>>> +    d7800 |\
>>>      r7500)
>>>          nand_do_upgrade "$1"
>>>          ;;
>>> diff --git a/target/linux/ipq806x/image/Makefile
>>> b/target/linux/ipq806x/image/Makefile
>>> index 14cf442..8f46af8 100644
>>> --- a/target/linux/ipq806x/image/Makefile
>>> +++ b/target/linux/ipq806x/image/Makefile
>>> @@ -121,6 +121,17 @@ define Device/R7500
>>>      BOARD_NAME := r7500
>>>  endef
>>>
>>> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
>>> +define Device/D7800
>>> +    $(call Device/DniImage)
>>> +    DEVICE_DTS := qcom-ipq8064-d7800
>>> +    KERNEL_SIZE := 2097152
>>> +    NETGEAR_BOARD_ID := D7800
>>> +    NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
>>> +    BLOCKSIZE := 128KiB
>>> +    PAGESIZE := 2048
>>> +    BOARD_NAME := d7800
>>> +endef
>>> +
>>> +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800
>>>
>>>  $(eval $(call BuildImage))
>>> diff --git
>>> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>
>>> new file mode 100644
>>> index 0000000..ecc1cff
>>> --- /dev/null
>>> +++
>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>
>>> @@ -0,0 +1,381 @@
>>> +--- a/arch/arm/boot/dts/Makefile    2015-09-22 18:30:09.033530282 +0530
>>> ++++ b/arch/arm/boot/dts/Makefile    2015-09-23 17:06:44.892947581 +0530
>>> +@@ -362,6 +362,7 @@
>>> +     qcom-ipq8064-ap148.dtb \
>>> +     qcom-ipq8064-db149.dtb \
>>> +     qcom-ipq8064-r7500.dtb \
>>> ++    qcom-ipq8064-d7800.dtb \
>>> +     qcom-msm8660-surf.dtb \
>>> +     qcom-msm8960-cdp.dtb \
>>> +     qcom-msm8974-sony-xperia-honami.dtb
>>> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    1970-01-01
>>> 05:30:00.000000000 +0530
>>> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    2015-09-23
>>> 17:06:45.336947567 +0530
>>> +@@ -0,0 +1,368 @@
>>> ++#include "qcom-ipq8064-v1.0.dtsi"
>>> ++
>>> ++#include <dt-bindings/input/input.h>
>>> ++
>>> ++/ {
>>> ++    model = "Netgear Nighthawk X4 D7800";
>>> ++    compatible = "netgear,d7800", "qcom,ipq8064";
>>> ++
>>> ++    memory@0 {
>>> ++        reg = <0x42000000 0xe000000>;
>>> ++        device_type = "memory";
>>> ++    };
>>> ++
>>> ++    reserved-memory {
>>> ++        #address-cells = <1>;
>>> ++        #size-cells = <1>;
>>> ++        ranges;
>>> ++        rsvd@41200000 <mailto:rsvd@41200000> {
>>> ++            reg = <0x41200000 0x300000>;
>>> ++            no-map;
>>> ++        };
>>> ++    };
>>> ++
>>> ++    aliases {
>>> ++        serial0 = &uart4;
>>> ++        mdio-gpio0 = &mdio0;
>>> ++    };
>>> ++
>>> ++    chosen {
>>> ++        bootargs = "rootfstype=squashfs noinitrd";
>>> ++        linux,stdout-path = "serial0:115200n8";
>>> ++    };
>>> ++
>>> ++    soc {
>>> ++        pinmux@800000 <mailto:pinmux@800000> {
>>> ++            i2c4_pins: i2c4_pinmux {
>>> ++                pins = "gpio12", "gpio13";
>>> ++                function = "gsbi4";
>>> ++                bias-disable;
>>> ++            };
>>> ++
>>> ++            pcie0_pins: pcie0_pinmux {
>>> ++                mux {
>>> ++                    pins = "gpio3";
>>> ++                    function = "pcie1_rst";
>>> ++                    drive-strength = <12>;
>>> ++                    bias-disable;
>>> ++                };
>>> ++            };
>>> ++
>>> ++            pcie1_pins: pcie1_pinmux {
>>> ++                mux {
>>> ++                    pins = "gpio48";
>>> ++                    function = "pcie2_rst";
>>> ++                    drive-strength = <12>;
>>> ++                    bias-disable;
>>> ++                };
>>> ++            };
>>> ++
>>> ++            nand_pins: nand_pins {
>>> ++                mux {
>>> ++                    pins = "gpio34", "gpio35", "gpio36",
>>> ++                           "gpio37", "gpio38", "gpio39",
>>> ++                           "gpio40", "gpio41", "gpio42",
>>> ++                           "gpio43", "gpio44", "gpio45",
>>> ++                           "gpio46", "gpio47";
>>> ++                    function = "nand";
>>> ++                    drive-strength = <10>;
>>> ++                    bias-disable;
>>> ++                };
>>> ++                pullups {
>>> ++                    pins = "gpio39";
>>> ++                    bias-pull-up;
>>> ++                };
>>> ++                hold {
>>> ++                    pins = "gpio40", "gpio41", "gpio42",
>>> ++                           "gpio43", "gpio44", "gpio45",
>>> ++                           "gpio46", "gpio47";
>>> ++                    bias-bus-hold;
>>> ++                };
>>> ++            };
>>> ++
>>> ++            mdio0_pins: mdio0_pins {
>>> ++                mux {
>>> ++                    pins = "gpio0", "gpio1";
>>> ++                    function = "gpio";
>>> ++                    drive-strength = <8>;
>>> ++                    bias-disable;
>>> ++                };
>>> ++            };
>>> ++
>>> ++            rgmii2_pins: rgmii2_pins {
>>> ++                mux {
>>> ++                    pins = "gpio27", "gpio28", "gpio29", "gpio30",
>>> "gpio31", "gpio32",
>>> ++                           "gpio51", "gpio52", "gpio59", "gpio60",
>>> "gpio61", "gpio62" ;
>>> ++                    function = "rgmii2";
>>> ++                    drive-strength = <8>;
>>> ++                    bias-disable;
>>> ++                };
>>> ++            };
>>> ++        };
>>> ++
>>> ++        gsbi@16300000 <mailto:gsbi@16300000> {
>>> ++            qcom,mode = <GSBI_PROT_I2C_UART>;
>>> ++            status = "ok";
>>> ++            serial@16340000 <mailto:serial@16340000> {
>>> ++                status = "ok";
>>> ++            };
>>> ++            /*
>>> ++             * The i2c device on gsbi4 should not be enabled.
>>> ++             * On ipq806x designs gsbi4 i2c is meant for exclusive
>>> ++             * RPM usage. Turning this on in kernel manifests as
>>> ++             * i2c failure for the RPM.
>>> ++             */
>>> ++        };
>>> ++
>>> ++        sata-phy@1b400000 <mailto:sata-phy@1b400000> {
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        sata@29000000 <mailto:sata@29000000> {
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        phy@100f8800 <mailto:phy@100f8800> {        /* USB3 port 1
>>> HS phy */
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        phy@100f8830 <mailto:phy@100f8830> {        /* USB3 port 1
>>> SS phy */
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        phy@110f8800 <mailto:phy@110f8800> {        /* USB3 port 0
>>> HS phy */
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        phy@110f8830 <mailto:phy@110f8830> {        /* USB3 port 0
>>> SS phy */
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        usb30@0 {
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        usb30@1 {
>>> ++            status = "ok";
>>> ++        };
>>> ++
>>> ++        pcie0: pci@1b500000 <mailto:pci@1b500000> {
>>> ++            status = "ok";
>>> ++            reset-gpio = <&qcom_pinmux 3 0>;
>>> ++            pinctrl-0 = <&pcie0_pins>;
>>> ++            pinctrl-names = "default";
>>> ++        };
>>> ++
>>> ++        pcie1: pci@1b700000 <mailto:pci@1b700000> {
>>> ++            status = "ok";
>>> ++            reset-gpio = <&qcom_pinmux 48 0>;
>>> ++            pinctrl-0 = <&pcie1_pins>;
>>> ++            pinctrl-names = "default";
>>> ++        };
>>> ++
>>> ++        nand@1ac00000 <mailto:nand@1ac00000> {
>>> ++            status = "ok";
>>> ++
>>> ++            pinctrl-0 = <&nand_pins>;
>>> ++            pinctrl-names = "default";
>>> ++
>>> ++            nand-ecc-strength = <4>;
>>> ++            nand-bus-width = <8>;
>>> ++
>>> ++            #address-cells = <1>;
>>> ++            #size-cells = <1>;
>>> ++
>>> ++            qcadata@0 {
>>> ++                label = "qcadata";
>>> ++                reg = <0x0000000 0x0c80000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            APPSBL@c80000 <mailto:APPSBL@c80000> {
>>> ++                label = "APPSBL";
>>> ++                reg = <0x0c80000 0x0500000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            APPSBLENV@1180000 <mailto:APPSBLENV@1180000> {
>>> ++                label = "APPSBLENV";
>>> ++                reg = <0x1180000 0x0080000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            art: art@1200000 <mailto:art@1200000> {
>>> ++                label = "art";
>>> ++                reg = <0x1200000 0x0140000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            artbak: art@1340000 <mailto:art@1340000> {
>>> ++                label = "artbak";
>>> ++                reg = <0x1340000 0x0140000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            kernel@1480000 <mailto:kernel@1480000> {
>>> ++                label = "kernel";
>>> ++                reg = <0x1480000 0x0200000>;
>>> ++            };
>>> ++
>>> ++            ubi@1680000 <mailto:ubi@1680000> {
>>> ++                label = "ubi";
>>> ++                reg = <0x1680000 0x1E00000>;
>>> ++            };
>>> ++
>>> ++            netgear@3480000 <mailto:netgear@3480000> {
>>> ++                label = "netgear";
>>> ++                reg = <0x3480000 0x4480000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            reserve@7900000 <mailto:reserve@7900000> {
>>> ++                label = "reserve";
>>> ++                reg = <0x7900000 0x0700000>;
>>> ++                read-only;
>>> ++            };
>>> ++
>>> ++            firmware@1480000 <mailto:firmware@1480000> {
>>> ++                label = "firmware";
>>> ++                reg = <0x1480000 0x2000000>;
>>> ++            };
>>> ++
>>> ++        };
>>> ++
>>> ++        mdio0: mdio {
>>> ++            compatible = "virtual,mdio-gpio";
>>> ++            #address-cells = <1>;
>>> ++            #size-cells = <0>;
>>> ++            gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
>>> ++            pinctrl-0 = <&mdio0_pins>;
>>> ++            pinctrl-names = "default";
>>> ++
>>> ++            phy0: ethernet-phy@0 {
>>> ++                device_type = "ethernet-phy";
>>> ++                reg = <0>;
>>> ++                qca,ar8327-initvals = <
>>> ++                    0x00004 0x7600000   /* PAD0_MODE */
>>> ++                    0x00008 0x1000000   /* PAD5_MODE */
>>> ++                    0x0000c 0x80        /* PAD6_MODE */
>>> ++                    0x000e4 0xaa545     /* MAC_POWER_SEL */
>>> ++                    0x000e0 0xc74164de  /* SGMII_CTRL */
>>> ++                    0x0007c 0x4e        /* PORT0_STATUS */
>>> ++                    0x00094 0x4e        /* PORT6_STATUS */
>>> ++                    >;
>>> ++            };
>>> ++
>>> ++            phy4: ethernet-phy@4 {
>>> ++                device_type = "ethernet-phy";
>>> ++                reg = <4>;
>>> ++            };
>>> ++        };
>>> ++
>>> ++        gmac1: ethernet@37200000 <mailto:ethernet@37200000> {
>>> ++            status = "ok";
>>> ++            phy-mode = "rgmii";
>>> ++            phy-handle = <&phy4>;
>>> ++            qcom,id = <1>;
>>> ++
>>> ++            pinctrl-0 = <&rgmii2_pins>;
>>> ++            pinctrl-names = "default";
>>> ++
>>> ++            mtd-mac-address = <&art 6>;
>>> ++        };
>>> ++
>>> ++        gmac2: ethernet@37400000 <mailto:ethernet@37400000> {
>>> ++            status = "ok";
>>> ++            phy-mode = "sgmii";
>>> ++            qcom,id = <2>;
>>> ++
>>> ++            mtd-mac-address = <&art 0>;
>>> ++
>>> ++            fixed-link {
>>> ++                speed = <1000>;
>>> ++                full-duplex;
>>> ++            };
>>> ++        };
>>> ++    };
>>> ++
>>> ++    gpio-keys {
>>> ++        compatible = "gpio-keys";
>>> ++
>>> ++        wifi {
>>> ++            label = "wifi";
>>> ++            gpios = <&qcom_pinmux 6 1>;
>>> ++            linux,code = <KEY_WLAN>;
>>> ++        };
>>> ++
>>> ++        reset {
>>> ++            label = "reset";
>>> ++            gpios = <&qcom_pinmux 54 1>;
>>> ++            linux,code = <KEY_RESTART>;
>>> ++        };
>>> ++
>>> ++        wps {
>>> ++            label = "wps";
>>> ++            gpios = <&qcom_pinmux 65 1>;
>>> ++            linux,code = <KEY_WPS_BUTTON>;
>>> ++        };
>>> ++    };
>>> ++
>>> ++    gpio-leds {
>>> ++        compatible = "gpio-leds";
>>> ++
>>> ++        usb1 {
>>> ++            label = "d7800:amber:usb1";
>>> ++            gpios = <&qcom_pinmux 7 0>;
>>> ++        };
>>> ++
>>> ++        usb3 {
>>> ++            label = "d7800:amber:usb3";
>>> ++            gpios = <&qcom_pinmux 8 0>;
>>> ++        };
>>> ++
>>> ++        status {
>>> ++            label = "d7800:amber:status";
>>> ++            gpios = <&qcom_pinmux 9 0>;
>>> ++        };
>>> ++
>>> ++        internet {
>>> ++            label = "d7800:white:internet";
>>> ++            gpios = <&qcom_pinmux 22 0>;
>>> ++        };
>>> ++
>>> ++        wan {
>>> ++            label = "d7800:white:wan";
>>> ++            gpios = <&qcom_pinmux 23 0>;
>>> ++        };
>>> ++
>>> ++        wps {
>>> ++            label = "d7800:white:wps";
>>> ++            gpios = <&qcom_pinmux 24 0>;
>>> ++        };
>>> ++
>>> ++        esata {
>>> ++            label = "d7800:white:esata";
>>> ++            gpios = <&qcom_pinmux 26 0>;
>>> ++        };
>>> ++
>>> ++        power {
>>> ++            label = "d7800:white:power";
>>> ++            gpios = <&qcom_pinmux 53 0>;
>>> ++            default-state = "on";
>>> ++        };
>>> ++
>>> ++        rfkill {
>>> ++            label = "d7800:white:rfkill";
>>> ++            gpios = <&qcom_pinmux 64 0>;
>>> ++        };
>>> ++
>>> ++        wifi5g {
>>> ++            label = "d7800:white:wifi5g";
>>> ++            gpios = <&qcom_pinmux 67 0>;
>>> ++        };
>>> ++    };
>>> ++};
>>> ++
>>> ++&adm_dma {
>>> ++    status = "ok";
>>> ++};
>>> diff --git a/target/linux/ipq806x/profiles/netgear.mk
>>> b/target/linux/ipq806x/profiles/netgear.mk
>>> index 3402f45..e1e7ed2 100644
>>> --- a/target/linux/ipq806x/profiles/netgear.mk
>>> +++ b/target/linux/ipq806x/profiles/netgear.mk
>>> @@ -17,4 +17,18 @@ endef
>>>  define Profile/R7500/Description
>>>      Package set for the Netgear Nighthawk X4 R7500.
>>>  endef
>>> +
>>> +define Profile/D7800
>>> +    NAME:=Netgear Nighthawk X4 D7800
>>> +    PACKAGES:= \
>>> +        kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
>>> +        kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
>>> +        kmod-ath10k wpad-mini ath10k-firmware-qca99x0
>>> +endef
>>> +
>>> +define Profile/D7800/Description
>>> +    Package set for the Netgear Nighthawk X4 D7800.
>>> +endef
>>> +
>>>  $(eval $(call Profile,R7500))
>>> +$(eval $(call Profile,D7800))

Tathagata Das Dec. 24, 2015, 4:55 p.m. UTC | #3

Thank you for help John. 

I have followed those step and send the patch again. Please check. 

On 24-12-2015 21:24, John Crispin wrote: 

> hi
> 
> first format the patch
> 
> git format-patch HEAD~1
> 
> this will give you your patch as 0001-$some_name.patch
> 
> then call this command to send the patch
> 
> git send-email --to openwrt-devel@lists.openwrt.org 0001-my_fix.patch
> 
> John
> 
> On 24/12/2015 14:31, Tathagata Das wrote: 
> 
> I have tried with git -send-email option. But it says command not
> supported. Could you send me the command?
> 
> On 24-12-2015 18:48, John Crispin wrote:
> 
> Hi,
> 
> your mail client replaced all tabs with spaces.
> 
> please consider using git to send patches. it will save you a lot of time.
> 
> John
> 
> On 24/12/2015 11:21, Tathagata Das wrote: Add support for the Netgear D7800 and build appropriate sysupgrade and
> factory images.
> 
> Known issues:
> . USB ports are not working
> . DSL is not added
> 
> Signed-off-by: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>>
> 
> ----
> 
> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001 From: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>>
> Date: Thu, 24 Dec 2015 09:44:01 +0530
> Subject: [PATCH] Added support for Netgear D7800
> Signed-off-by: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>>
> 
> ---
> .../linux/ipq806x/base-files/etc/board.d/01_leds | 1 +
> .../ipq806x/base-files/etc/board.d/02_network | 1 +
> target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +
> .../ipq806x/base-files/lib/upgrade/platform.sh | 2 +
> target/linux/ipq806x/image/Makefile | 13 +-
> ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381
> ++++++++++++++++++++
> target/linux/ipq806x/profiles/netgear.mk | 14 +
> 7 files changed, 414 insertions(+), 1 deletions(-)
> create mode 100644
> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index 07b5b06..b32c1cc 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -11,6 +11,7 @@ board_config_update
> board=$(ipq806x_board_name)
> 
> case "$board" in
> +d7800 |\
> r7500)
> ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
> ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
> b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 1302a55..6e18297 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
> 
> case "$board" in
> ap148 |\
> +d7800 |\
> r7500)
> ucidef_add_switch "switch0" \
> "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1 <mailto:6@eth1>"
> "5:wan" "0@eth0 <mailto:0@eth0>"
> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> index 5b27bde..be48b9f 100644
> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> @@ -20,6 +20,9 @@ ipq806x_board_detect() {
> *"DB149")
> name="db149"
> ;;
> + *"D7800")
> + name="d7800"
> + ;;
> *"R7500")
> name="r7500"
> ;;
> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> index c0e19a1..2400376 100644
> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> @@ -7,6 +7,7 @@ platform_check_image() {
> 
> case "$board" in
> AP148 |\
> + d7800 |\
> r7500)
> nand_do_platform_check $board $1
> return $?;
> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
> 
> case "$board" in
> AP148 |\
> + d7800 |\
> r7500)
> nand_do_upgrade "$1"
> ;;
> diff --git a/target/linux/ipq806x/image/Makefile
> b/target/linux/ipq806x/image/Makefile
> index 14cf442..8f46af8 100644
> --- a/target/linux/ipq806x/image/Makefile
> +++ b/target/linux/ipq806x/image/Makefile
> @@ -121,6 +121,17 @@ define Device/R7500
> BOARD_NAME := r7500
> endef
> 
> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
> +define Device/D7800
> + $(call Device/DniImage)
> + DEVICE_DTS := qcom-ipq8064-d7800
> + KERNEL_SIZE := 2097152
> + NETGEAR_BOARD_ID := D7800
> + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
> + BLOCKSIZE := 128KiB
> + PAGESIZE := 2048
> + BOARD_NAME := d7800
> +endef
> +
> +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800
> 
> $(eval $(call BuildImage))
> diff --git
> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> new file mode 100644
> index 0000000..ecc1cff
> --- /dev/null
> +++
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> @@ -0,0 +1,381 @@
> +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282 +0530
> ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581 +0530
> +@@ -362,6 +362,7 @@
> + qcom-ipq8064-ap148.dtb \
> + qcom-ipq8064-db149.dtb \
> + qcom-ipq8064-r7500.dtb \
> ++ qcom-ipq8064-d7800.dtb \
> + qcom-msm8660-surf.dtb \
> + qcom-msm8960-cdp.dtb \
> + qcom-msm8974-sony-xperia-honami.dtb
> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01
> 05:30:00.000000000 +0530
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23
> 17:06:45.336947567 +0530
> +@@ -0,0 +1,368 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++ model = "Netgear Nighthawk X4 D7800";
> ++ compatible = "netgear,d7800", "qcom,ipq8064";
> ++
> ++ memory@0 {
> ++ reg = <0x42000000 0xe000000>;
> ++ device_type = "memory";
> ++ };
> ++
> ++ reserved-memory {
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ ranges;
> ++ rsvd@41200000 <mailto:rsvd@41200000> {
> ++ reg = <0x41200000 0x300000>;
> ++ no-map;
> ++ };
> ++ };
> ++
> ++ aliases {
> ++ serial0 = &uart4;
> ++ mdio-gpio0 = &mdio0;
> ++ };
> ++
> ++ chosen {
> ++ bootargs = "rootfstype=squashfs noinitrd";
> ++ linux,stdout-path = "serial0:115200n8";
> ++ };
> ++
> ++ soc {
> ++ pinmux@800000 <mailto:pinmux@800000> {
> ++ i2c4_pins: i2c4_pinmux {
> ++ pins = "gpio12", "gpio13";
> ++ function = "gsbi4";
> ++ bias-disable;
> ++ };
> ++
> ++ pcie0_pins: pcie0_pinmux {
> ++ mux {
> ++ pins = "gpio3";
> ++ function = "pcie1_rst";
> ++ drive-strength = <12>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ pcie1_pins: pcie1_pinmux {
> ++ mux {
> ++ pins = "gpio48";
> ++ function = "pcie2_rst";
> ++ drive-strength = <12>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ nand_pins: nand_pins {
> ++ mux {
> ++ pins = "gpio34", "gpio35", "gpio36",
> ++ "gpio37", "gpio38", "gpio39",
> ++ "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ function = "nand";
> ++ drive-strength = <10>;
> ++ bias-disable;
> ++ };
> ++ pullups {
> ++ pins = "gpio39";
> ++ bias-pull-up;
> ++ };
> ++ hold {
> ++ pins = "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ bias-bus-hold;
> ++ };
> ++ };
> ++
> ++ mdio0_pins: mdio0_pins {
> ++ mux {
> ++ pins = "gpio0", "gpio1";
> ++ function = "gpio";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ rgmii2_pins: rgmii2_pins {
> ++ mux {
> ++ pins = "gpio27", "gpio28", "gpio29", "gpio30",
> "gpio31", "gpio32",
> ++ "gpio51", "gpio52", "gpio59", "gpio60",
> "gpio61", "gpio62" ;
> ++ function = "rgmii2";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++ };
> ++
> ++ gsbi@16300000 <mailto:gsbi@16300000> {
> ++ qcom,mode = <GSBI_PROT_I2C_UART>;
> ++ status = "ok";
> ++ serial@16340000 <mailto:serial@16340000> {
> ++ status = "ok";
> ++ };
> ++ /*
> ++ * The i2c device on gsbi4 should not be enabled.
> ++ * On ipq806x designs gsbi4 i2c is meant for exclusive
> ++ * RPM usage. Turning this on in kernel manifests as
> ++ * i2c failure for the RPM.
> ++ */
> ++ };
> ++
> ++ sata-phy@1b400000 <mailto:sata-phy@1b400000> {
> ++ status = "ok";
> ++ };
> ++
> ++ sata@29000000 <mailto:sata@29000000> {
> ++ status = "ok";
> ++ };
> ++
> ++ phy@100f8800 <mailto:phy@100f8800> { /* USB3 port 1
> HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@100f8830 <mailto:phy@100f8830> { /* USB3 port 1
> SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@110f8800 <mailto:phy@110f8800> { /* USB3 port 0
> HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@110f8830 <mailto:phy@110f8830> { /* USB3 port 0
> SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ usb30@0 {
> ++ status = "ok";
> ++ };
> ++
> ++ usb30@1 {
> ++ status = "ok";
> ++ };
> ++
> ++ pcie0: pci@1b500000 <mailto:pci@1b500000> {
> ++ status = "ok";
> ++ reset-gpio = <&qcom_pinmux 3 0>;
> ++ pinctrl-0 = <&pcie0_pins>;
> ++ pinctrl-names = "default";
> ++ };
> ++
> ++ pcie1: pci@1b700000 <mailto:pci@1b700000> {
> ++ status = "ok";
> ++ reset-gpio = <&qcom_pinmux 48 0>;
> ++ pinctrl-0 = <&pcie1_pins>;
> ++ pinctrl-names = "default";
> ++ };
> ++
> ++ nand@1ac00000 <mailto:nand@1ac00000> {
> ++ status = "ok";
> ++
> ++ pinctrl-0 = <&nand_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ nand-ecc-strength = <4>;
> ++ nand-bus-width = <8>;
> ++
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++
> ++ qcadata@0 {
> ++ label = "qcadata";
> ++ reg = <0x0000000 0x0c80000>;
> ++ read-only;
> ++ };
> ++
> ++ APPSBL@c80000 <mailto:APPSBL@c80000> {
> ++ label = "APPSBL";
> ++ reg = <0x0c80000 0x0500000>;
> ++ read-only;
> ++ };
> ++
> ++ APPSBLENV@1180000 <mailto:APPSBLENV@1180000> {
> ++ label = "APPSBLENV";
> ++ reg = <0x1180000 0x0080000>;
> ++ read-only;
> ++ };
> ++
> ++ art: art@1200000 <mailto:art@1200000> {
> ++ label = "art";
> ++ reg = <0x1200000 0x0140000>;
> ++ read-only;
> ++ };
> ++
> ++ artbak: art@1340000 <mailto:art@1340000> {
> ++ label = "artbak";
> ++ reg = <0x1340000 0x0140000>;
> ++ read-only;
> ++ };
> ++
> ++ kernel@1480000 <mailto:kernel@1480000> {
> ++ label = "kernel";
> ++ reg = <0x1480000 0x0200000>;
> ++ };
> ++
> ++ ubi@1680000 <mailto:ubi@1680000> {
> ++ label = "ubi";
> ++ reg = <0x1680000 0x1E00000>;
> ++ };
> ++
> ++ netgear@3480000 <mailto:netgear@3480000> {
> ++ label = "netgear";
> ++ reg = <0x3480000 0x4480000>;
> ++ read-only;
> ++ };
> ++
> ++ reserve@7900000 <mailto:reserve@7900000> {
> ++ label = "reserve";
> ++ reg = <0x7900000 0x0700000>;
> ++ read-only;
> ++ };
> ++
> ++ firmware@1480000 <mailto:firmware@1480000> {
> ++ label = "firmware";
> ++ reg = <0x1480000 0x2000000>;
> ++ };
> ++
> ++ };
> ++
> ++ mdio0: mdio {
> ++ compatible = "virtual,mdio-gpio";
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++ pinctrl-0 = <&mdio0_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ phy0: ethernet-phy@0 {
> ++ device_type = "ethernet-phy";
> ++ reg = <0>;
> ++ qca,ar8327-initvals = <
> ++ 0x00004 0x7600000 /* PAD0_MODE */
> ++ 0x00008 0x1000000 /* PAD5_MODE */
> ++ 0x0000c 0x80 /* PAD6_MODE */
> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
> ++ 0x000e0 0xc74164de /* SGMII_CTRL */
> ++ 0x0007c 0x4e /* PORT0_STATUS */
> ++ 0x00094 0x4e /* PORT6_STATUS */
> ++ >;
> ++ };
> ++
> ++ phy4: ethernet-phy@4 {
> ++ device_type = "ethernet-phy";
> ++ reg = <4>;
> ++ };
> ++ };
> ++
> ++ gmac1: ethernet@37200000 <mailto:ethernet@37200000> {
> ++ status = "ok";
> ++ phy-mode = "rgmii";
> ++ phy-handle = <&phy4>;
> ++ qcom,id = <1>;
> ++
> ++ pinctrl-0 = <&rgmii2_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ mtd-mac-address = <&art 6>;
> ++ };
> ++
> ++ gmac2: ethernet@37400000 <mailto:ethernet@37400000> {
> ++ status = "ok";
> ++ phy-mode = "sgmii";
> ++ qcom,id = <2>;
> ++
> ++ mtd-mac-address = <&art 0>;
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++ };
> ++
> ++ gpio-keys {
> ++ compatible = "gpio-keys";
> ++
> ++ wifi {
> ++ label = "wifi";
> ++ gpios = <&qcom_pinmux 6 1>;
> ++ linux,code = <KEY_WLAN>;
> ++ };
> ++
> ++ reset {
> ++ label = "reset";
> ++ gpios = <&qcom_pinmux 54 1>;
> ++ linux,code = <KEY_RESTART>;
> ++ };
> ++
> ++ wps {
> ++ label = "wps";
> ++ gpios = <&qcom_pinmux 65 1>;
> ++ linux,code = <KEY_WPS_BUTTON>;
> ++ };
> ++ };
> ++
> ++ gpio-leds {
> ++ compatible = "gpio-leds";
> ++
> ++ usb1 {
> ++ label = "d7800:amber:usb1";
> ++ gpios = <&qcom_pinmux 7 0>;
> ++ };
> ++
> ++ usb3 {
> ++ label = "d7800:amber:usb3";
> ++ gpios = <&qcom_pinmux 8 0>;
> ++ };
> ++
> ++ status {
> ++ label = "d7800:amber:status";
> ++ gpios = <&qcom_pinmux 9 0>;
> ++ };
> ++
> ++ internet {
> ++ label = "d7800:white:internet";
> ++ gpios = <&qcom_pinmux 22 0>;
> ++ };
> ++
> ++ wan {
> ++ label = "d7800:white:wan";
> ++ gpios = <&qcom_pinmux 23 0>;
> ++ };
> ++
> ++ wps {
> ++ label = "d7800:white:wps";
> ++ gpios = <&qcom_pinmux 24 0>;
> ++ };
> ++
> ++ esata {
> ++ label = "d7800:white:esata";
> ++ gpios = <&qcom_pinmux 26 0>;
> ++ };
> ++
> ++ power {
> ++ label = "d7800:white:power";
> ++ gpios = <&qcom_pinmux 53 0>;
> ++ default-state = "on";
> ++ };
> ++
> ++ rfkill {
> ++ label = "d7800:white:rfkill";
> ++ gpios = <&qcom_pinmux 64 0>;
> ++ };
> ++
> ++ wifi5g {
> ++ label = "d7800:white:wifi5g";
> ++ gpios = <&qcom_pinmux 67 0>;
> ++ };
> ++ };
> ++};
> ++
> ++&adm_dma {
> ++ status = "ok";
> ++};
> diff --git a/target/linux/ipq806x/profiles/netgear.mk
> b/target/linux/ipq806x/profiles/netgear.mk
> index 3402f45..e1e7ed2 100644
> --- a/target/linux/ipq806x/profiles/netgear.mk
> +++ b/target/linux/ipq806x/profiles/netgear.mk
> @@ -17,4 +17,18 @@ endef
> define Profile/R7500/Description
> Package set for the Netgear Nighthawk X4 R7500.
> endef
> +
> +define Profile/D7800
> + NAME:=Netgear Nighthawk X4 D7800
> + PACKAGES:= \
> + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
> + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
> + kmod-ath10k wpad-mini ath10k-firmware-qca99x0
> +endef
> +
> +define Profile/D7800/Description
> + Package set for the Netgear Nighthawk X4 D7800.
> +endef
> +
> $(eval $(call Profile,R7500))
> +$(eval $(call Profile,D7800))

John Crispin Dec. 25, 2015, 7:49 a.m. UTC | #4

On 24/12/2015 17:55, Tathagata Das wrote:
>  
> 
>  
> 
> Thank you for help John.
> 
> I have followed those step and send the patch again. Please check.
> 

well, we never received that mail i am afraid.

	John

> On 24-12-2015 21:24, John Crispin wrote:
> 
>> hi
>>
>> first format the patch
>>
>> git format-patch HEAD~1
>>
>> this will give you your patch as 0001-$some_name.patch
>>
>> then call this command to send the patch
>>
>> git send-email --to openwrt-devel@lists.openwrt.org
>> <mailto:openwrt-devel@lists.openwrt.org> 0001-my_fix.patch
>>
>>     John
>>
>> On 24/12/2015 14:31, Tathagata Das wrote:
>>>  
>>>
>>>  
>>>
>>> I have tried with git -send-email option. But it says command not
>>> supported. Could you send me the command?
>>>
>>> On 24-12-2015 18:48, John Crispin wrote:
>>>
>>>> Hi,
>>>>
>>>> your mail client replaced all tabs with spaces.
>>>>
>>>> please consider using git to send patches. it will save you a lot of
>>>> time.
>>>>
>>>>     John
>>>>
>>>> On 24/12/2015 11:21, Tathagata Das wrote:
>>>>> Add support for the Netgear D7800 and build appropriate sysupgrade and
>>>>> factory images.
>>>>>
>>>>> Known issues:
>>>>> . USB ports are not working
>>>>> . DSL is not added
>>>>>
>>>>> Signed-off-by: Tathagata Das <tathagata@alumnux.com
>>>>> <mailto:tathagata@alumnux.com>
>>>>> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
>>>>>
>>>>> ----
>>>>>
>>>>>> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001
>>>>> From: Tathagata Das <tathagata@alumnux.com
>>>>> <mailto:tathagata@alumnux.com>
>>>>> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
>>>>> Date: Thu, 24 Dec 2015 09:44:01 +0530
>>>>> Subject: [PATCH] Added support for Netgear D7800
>>>>>  Signed-off-by: Tathagata Das <tathagata@alumnux.com
>>>>> <mailto:tathagata@alumnux.com>
>>>>> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
>>>>>
>>>>> ---
>>>>>  .../linux/ipq806x/base-files/etc/board.d/01_leds   |    1 +
>>>>>  .../ipq806x/base-files/etc/board.d/02_network      |    1 +
>>>>>  target/linux/ipq806x/base-files/lib/ipq806x.sh     |    3 +
>>>>>  .../ipq806x/base-files/lib/upgrade/platform.sh     |    2 +
>>>>>  target/linux/ipq806x/image/Makefile                |   13 +-
>>>>>  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch |  381
>>>>> ++++++++++++++++++++
>>>>>  target/linux/ipq806x/profiles/netgear.mk           |   14 +
>>>>>  7 files changed, 414 insertions(+), 1 deletions(-)
>>>>>  create mode 100644
>>>>> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>>>
>>>>>
>>>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>>>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>>>> index 07b5b06..b32c1cc 100755
>>>>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>>>> @@ -11,6 +11,7 @@ board_config_update
>>>>>  board=$(ipq806x_board_name)
>>>>>
>>>>>  case "$board" in
>>>>> +d7800 |\
>>>>>  r7500)
>>>>>      ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>>>>>      ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
>>>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>>>> b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>>>> index 1302a55..6e18297 100755
>>>>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>>>> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
>>>>>
>>>>>  case "$board" in
>>>>>  ap148 |\
>>>>> +d7800 |\
>>>>>  r7500)
>>>>>      ucidef_add_switch "switch0" \
>>>>>          "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1 <mailto:6@eth1>
>>>>> <mailto:6@eth1 <mailto:6@eth1>>"
>>>>> "5:wan" "0@eth0 <mailto:0@eth0> <mailto:0@eth0 <mailto:0@eth0>>"
>>>>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>>>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>>>> index 5b27bde..be48b9f 100644
>>>>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>>>> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>>>> @@ -20,6 +20,9 @@ ipq806x_board_detect() {
>>>>>      *"DB149")
>>>>>          name="db149"
>>>>>          ;;
>>>>> +    *"D7800")
>>>>> +        name="d7800"
>>>>> +        ;;
>>>>>      *"R7500")
>>>>>          name="r7500"
>>>>>          ;;
>>>>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>>>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>>>> index c0e19a1..2400376 100644
>>>>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>>>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>>>> @@ -7,6 +7,7 @@ platform_check_image() {
>>>>>
>>>>>      case "$board" in
>>>>>      AP148 |\
>>>>> +    d7800 |\
>>>>>      r7500)
>>>>>          nand_do_platform_check $board $1
>>>>>          return $?;
>>>>> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
>>>>>
>>>>>      case "$board" in
>>>>>      AP148 |\
>>>>> +    d7800 |\
>>>>>      r7500)
>>>>>          nand_do_upgrade "$1"
>>>>>          ;;
>>>>> diff --git a/target/linux/ipq806x/image/Makefile
>>>>> b/target/linux/ipq806x/image/Makefile
>>>>> index 14cf442..8f46af8 100644
>>>>> --- a/target/linux/ipq806x/image/Makefile
>>>>> +++ b/target/linux/ipq806x/image/Makefile
>>>>> @@ -121,6 +121,17 @@ define Device/R7500
>>>>>      BOARD_NAME := r7500
>>>>>  endef
>>>>>
>>>>> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
>>>>> +define Device/D7800
>>>>> +    $(call Device/DniImage)
>>>>> +    DEVICE_DTS := qcom-ipq8064-d7800
>>>>> +    KERNEL_SIZE := 2097152
>>>>> +    NETGEAR_BOARD_ID := D7800
>>>>> +    NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
>>>>> +    BLOCKSIZE := 128KiB
>>>>> +    PAGESIZE := 2048
>>>>> +    BOARD_NAME := d7800
>>>>> +endef
>>>>> +
>>>>> +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800
>>>>>
>>>>>  $(eval $(call BuildImage))
>>>>> diff --git
>>>>> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>>>
>>>>> new file mode 100644
>>>>> index 0000000..ecc1cff
>>>>> --- /dev/null
>>>>> +++
>>>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
>>>>>
>>>>> @@ -0,0 +1,381 @@
>>>>> +--- a/arch/arm/boot/dts/Makefile    2015-09-22 18:30:09.033530282
>>>>> +0530
>>>>> ++++ b/arch/arm/boot/dts/Makefile    2015-09-23 17:06:44.892947581
>>>>> +0530
>>>>> +@@ -362,6 +362,7 @@
>>>>> +     qcom-ipq8064-ap148.dtb \
>>>>> +     qcom-ipq8064-db149.dtb \
>>>>> +     qcom-ipq8064-r7500.dtb \
>>>>> ++    qcom-ipq8064-d7800.dtb \
>>>>> +     qcom-msm8660-surf.dtb \
>>>>> +     qcom-msm8960-cdp.dtb \
>>>>> +     qcom-msm8974-sony-xperia-honami.dtb
>>>>> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    1970-01-01
>>>>> 05:30:00.000000000 +0530
>>>>> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    2015-09-23
>>>>> 17:06:45.336947567 +0530
>>>>> +@@ -0,0 +1,368 @@
>>>>> ++#include "qcom-ipq8064-v1.0.dtsi"
>>>>> ++
>>>>> ++#include <dt-bindings/input/input.h>
>>>>> ++
>>>>> ++/ {
>>>>> ++    model = "Netgear Nighthawk X4 D7800";
>>>>> ++    compatible = "netgear,d7800", "qcom,ipq8064";
>>>>> ++
>>>>> ++    memory@0 {
>>>>> ++        reg = <0x42000000 0xe000000>;
>>>>> ++        device_type = "memory";
>>>>> ++    };
>>>>> ++
>>>>> ++    reserved-memory {
>>>>> ++        #address-cells = <1>;
>>>>> ++        #size-cells = <1>;
>>>>> ++        ranges;
>>>>> ++        rsvd@41200000 <mailto:rsvd@41200000>
>>>>> <mailto:rsvd@41200000 <mailto:rsvd@41200000>> {
>>>>> ++            reg = <0x41200000 0x300000>;
>>>>> ++            no-map;
>>>>> ++        };
>>>>> ++    };
>>>>> ++
>>>>> ++    aliases {
>>>>> ++        serial0 = &uart4;
>>>>> ++        mdio-gpio0 = &mdio0;
>>>>> ++    };
>>>>> ++
>>>>> ++    chosen {
>>>>> ++        bootargs = "rootfstype=squashfs noinitrd";
>>>>> ++        linux,stdout-path = "serial0:115200n8";
>>>>> ++    };
>>>>> ++
>>>>> ++    soc {
>>>>> ++        pinmux@800000 <mailto:pinmux@800000>
>>>>> <mailto:pinmux@800000 <mailto:pinmux@800000>> {
>>>>> ++            i2c4_pins: i2c4_pinmux {
>>>>> ++                pins = "gpio12", "gpio13";
>>>>> ++                function = "gsbi4";
>>>>> ++                bias-disable;
>>>>> ++            };
>>>>> ++
>>>>> ++            pcie0_pins: pcie0_pinmux {
>>>>> ++                mux {
>>>>> ++                    pins = "gpio3";
>>>>> ++                    function = "pcie1_rst";
>>>>> ++                    drive-strength = <12>;
>>>>> ++                    bias-disable;
>>>>> ++                };
>>>>> ++            };
>>>>> ++
>>>>> ++            pcie1_pins: pcie1_pinmux {
>>>>> ++                mux {
>>>>> ++                    pins = "gpio48";
>>>>> ++                    function = "pcie2_rst";
>>>>> ++                    drive-strength = <12>;
>>>>> ++                    bias-disable;
>>>>> ++                };
>>>>> ++            };
>>>>> ++
>>>>> ++            nand_pins: nand_pins {
>>>>> ++                mux {
>>>>> ++                    pins = "gpio34", "gpio35", "gpio36",
>>>>> ++                           "gpio37", "gpio38", "gpio39",
>>>>> ++                           "gpio40", "gpio41", "gpio42",
>>>>> ++                           "gpio43", "gpio44", "gpio45",
>>>>> ++                           "gpio46", "gpio47";
>>>>> ++                    function = "nand";
>>>>> ++                    drive-strength = <10>;
>>>>> ++                    bias-disable;
>>>>> ++                };
>>>>> ++                pullups {
>>>>> ++                    pins = "gpio39";
>>>>> ++                    bias-pull-up;
>>>>> ++                };
>>>>> ++                hold {
>>>>> ++                    pins = "gpio40", "gpio41", "gpio42",
>>>>> ++                           "gpio43", "gpio44", "gpio45",
>>>>> ++                           "gpio46", "gpio47";
>>>>> ++                    bias-bus-hold;
>>>>> ++                };
>>>>> ++            };
>>>>> ++
>>>>> ++            mdio0_pins: mdio0_pins {
>>>>> ++                mux {
>>>>> ++                    pins = "gpio0", "gpio1";
>>>>> ++                    function = "gpio";
>>>>> ++                    drive-strength = <8>;
>>>>> ++                    bias-disable;
>>>>> ++                };
>>>>> ++            };
>>>>> ++
>>>>> ++            rgmii2_pins: rgmii2_pins {
>>>>> ++                mux {
>>>>> ++                    pins = "gpio27", "gpio28", "gpio29", "gpio30",
>>>>> "gpio31", "gpio32",
>>>>> ++                           "gpio51", "gpio52", "gpio59", "gpio60",
>>>>> "gpio61", "gpio62" ;
>>>>> ++                    function = "rgmii2";
>>>>> ++                    drive-strength = <8>;
>>>>> ++                    bias-disable;
>>>>> ++                };
>>>>> ++            };
>>>>> ++        };
>>>>> ++
>>>>> ++        gsbi@16300000 <mailto:gsbi@16300000>
>>>>> <mailto:gsbi@16300000 <mailto:gsbi@16300000>> {
>>>>> ++            qcom,mode = <GSBI_PROT_I2C_UART>;
>>>>> ++            status = "ok";
>>>>> ++            serial@16340000 <mailto:serial@16340000>
>>>>> <mailto:serial@16340000 <mailto:serial@16340000>> {
>>>>> ++                status = "ok";
>>>>> ++            };
>>>>> ++            /*
>>>>> ++             * The i2c device on gsbi4 should not be enabled.
>>>>> ++             * On ipq806x designs gsbi4 i2c is meant for exclusive
>>>>> ++             * RPM usage. Turning this on in kernel manifests as
>>>>> ++             * i2c failure for the RPM.
>>>>> ++             */
>>>>> ++        };
>>>>> ++
>>>>> ++        sata-phy@1b400000 <mailto:sata-phy@1b400000>
>>>>> <mailto:sata-phy@1b400000 <mailto:sata-phy@1b400000>> {
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        sata@29000000 <mailto:sata@29000000>
>>>>> <mailto:sata@29000000 <mailto:sata@29000000>> {
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        phy@100f8800 <mailto:phy@100f8800> <mailto:phy@100f8800
>>>>> <mailto:phy@100f8800>> {        /* USB3 port 1
>>>>> HS phy */
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        phy@100f8830 <mailto:phy@100f8830> <mailto:phy@100f8830
>>>>> <mailto:phy@100f8830>> {        /* USB3 port 1
>>>>> SS phy */
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        phy@110f8800 <mailto:phy@110f8800> <mailto:phy@110f8800
>>>>> <mailto:phy@110f8800>> {        /* USB3 port 0
>>>>> HS phy */
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        phy@110f8830 <mailto:phy@110f8830> <mailto:phy@110f8830
>>>>> <mailto:phy@110f8830>> {        /* USB3 port 0
>>>>> SS phy */
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        usb30@0 {
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        usb30@1 {
>>>>> ++            status = "ok";
>>>>> ++        };
>>>>> ++
>>>>> ++        pcie0: pci@1b500000 <mailto:pci@1b500000>
>>>>> <mailto:pci@1b500000 <mailto:pci@1b500000>> {
>>>>> ++            status = "ok";
>>>>> ++            reset-gpio = <&qcom_pinmux 3 0>;
>>>>> ++            pinctrl-0 = <&pcie0_pins>;
>>>>> ++            pinctrl-names = "default";
>>>>> ++        };
>>>>> ++
>>>>> ++        pcie1: pci@1b700000 <mailto:pci@1b700000>
>>>>> <mailto:pci@1b700000 <mailto:pci@1b700000>> {
>>>>> ++            status = "ok";
>>>>> ++            reset-gpio = <&qcom_pinmux 48 0>;
>>>>> ++            pinctrl-0 = <&pcie1_pins>;
>>>>> ++            pinctrl-names = "default";
>>>>> ++        };
>>>>> ++
>>>>> ++        nand@1ac00000 <mailto:nand@1ac00000>
>>>>> <mailto:nand@1ac00000 <mailto:nand@1ac00000>> {
>>>>> ++            status = "ok";
>>>>> ++
>>>>> ++            pinctrl-0 = <&nand_pins>;
>>>>> ++            pinctrl-names = "default";
>>>>> ++
>>>>> ++            nand-ecc-strength = <4>;
>>>>> ++            nand-bus-width = <8>;
>>>>> ++
>>>>> ++            #address-cells = <1>;
>>>>> ++            #size-cells = <1>;
>>>>> ++
>>>>> ++            qcadata@0 {
>>>>> ++                label = "qcadata";
>>>>> ++                reg = <0x0000000 0x0c80000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            APPSBL@c80000 <mailto:APPSBL@c80000>
>>>>> <mailto:APPSBL@c80000 <mailto:APPSBL@c80000>> {
>>>>> ++                label = "APPSBL";
>>>>> ++                reg = <0x0c80000 0x0500000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            APPSBLENV@1180000 <mailto:APPSBLENV@1180000>
>>>>> <mailto:APPSBLENV@1180000 <mailto:APPSBLENV@1180000>> {
>>>>> ++                label = "APPSBLENV";
>>>>> ++                reg = <0x1180000 0x0080000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            art: art@1200000 <mailto:art@1200000>
>>>>> <mailto:art@1200000 <mailto:art@1200000>> {
>>>>> ++                label = "art";
>>>>> ++                reg = <0x1200000 0x0140000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            artbak: art@1340000 <mailto:art@1340000>
>>>>> <mailto:art@1340000 <mailto:art@1340000>> {
>>>>> ++                label = "artbak";
>>>>> ++                reg = <0x1340000 0x0140000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            kernel@1480000 <mailto:kernel@1480000>
>>>>> <mailto:kernel@1480000 <mailto:kernel@1480000>> {
>>>>> ++                label = "kernel";
>>>>> ++                reg = <0x1480000 0x0200000>;
>>>>> ++            };
>>>>> ++
>>>>> ++            ubi@1680000 <mailto:ubi@1680000> <mailto:ubi@1680000
>>>>> <mailto:ubi@1680000>> {
>>>>> ++                label = "ubi";
>>>>> ++                reg = <0x1680000 0x1E00000>;
>>>>> ++            };
>>>>> ++
>>>>> ++            netgear@3480000 <mailto:netgear@3480000>
>>>>> <mailto:netgear@3480000 <mailto:netgear@3480000>> {
>>>>> ++                label = "netgear";
>>>>> ++                reg = <0x3480000 0x4480000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            reserve@7900000 <mailto:reserve@7900000>
>>>>> <mailto:reserve@7900000 <mailto:reserve@7900000>> {
>>>>> ++                label = "reserve";
>>>>> ++                reg = <0x7900000 0x0700000>;
>>>>> ++                read-only;
>>>>> ++            };
>>>>> ++
>>>>> ++            firmware@1480000 <mailto:firmware@1480000>
>>>>> <mailto:firmware@1480000 <mailto:firmware@1480000>> {
>>>>> ++                label = "firmware";
>>>>> ++                reg = <0x1480000 0x2000000>;
>>>>> ++            };
>>>>> ++
>>>>> ++        };
>>>>> ++
>>>>> ++        mdio0: mdio {
>>>>> ++            compatible = "virtual,mdio-gpio";
>>>>> ++            #address-cells = <1>;
>>>>> ++            #size-cells = <0>;
>>>>> ++            gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
>>>>> ++            pinctrl-0 = <&mdio0_pins>;
>>>>> ++            pinctrl-names = "default";
>>>>> ++
>>>>> ++            phy0: ethernet-phy@0 {
>>>>> ++                device_type = "ethernet-phy";
>>>>> ++                reg = <0>;
>>>>> ++                qca,ar8327-initvals = <
>>>>> ++                    0x00004 0x7600000   /* PAD0_MODE */
>>>>> ++                    0x00008 0x1000000   /* PAD5_MODE */
>>>>> ++                    0x0000c 0x80        /* PAD6_MODE */
>>>>> ++                    0x000e4 0xaa545     /* MAC_POWER_SEL */
>>>>> ++                    0x000e0 0xc74164de  /* SGMII_CTRL */
>>>>> ++                    0x0007c 0x4e        /* PORT0_STATUS */
>>>>> ++                    0x00094 0x4e        /* PORT6_STATUS */
>>>>> ++                    >;
>>>>> ++            };
>>>>> ++
>>>>> ++            phy4: ethernet-phy@4 {
>>>>> ++                device_type = "ethernet-phy";
>>>>> ++                reg = <4>;
>>>>> ++            };
>>>>> ++        };
>>>>> ++
>>>>> ++        gmac1: ethernet@37200000 <mailto:ethernet@37200000>
>>>>> <mailto:ethernet@37200000 <mailto:ethernet@37200000>> {
>>>>> ++            status = "ok";
>>>>> ++            phy-mode = "rgmii";
>>>>> ++            phy-handle = <&phy4>;
>>>>> ++            qcom,id = <1>;
>>>>> ++
>>>>> ++            pinctrl-0 = <&rgmii2_pins>;
>>>>> ++            pinctrl-names = "default";
>>>>> ++
>>>>> ++            mtd-mac-address = <&art 6>;
>>>>> ++        };
>>>>> ++
>>>>> ++        gmac2: ethernet@37400000 <mailto:ethernet@37400000>
>>>>> <mailto:ethernet@37400000 <mailto:ethernet@37400000>> {
>>>>> ++            status = "ok";
>>>>> ++            phy-mode = "sgmii";
>>>>> ++            qcom,id = <2>;
>>>>> ++
>>>>> ++            mtd-mac-address = <&art 0>;
>>>>> ++
>>>>> ++            fixed-link {
>>>>> ++                speed = <1000>;
>>>>> ++                full-duplex;
>>>>> ++            };
>>>>> ++        };
>>>>> ++    };
>>>>> ++
>>>>> ++    gpio-keys {
>>>>> ++        compatible = "gpio-keys";
>>>>> ++
>>>>> ++        wifi {
>>>>> ++            label = "wifi";
>>>>> ++            gpios = <&qcom_pinmux 6 1>;
>>>>> ++            linux,code = <KEY_WLAN>;
>>>>> ++        };
>>>>> ++
>>>>> ++        reset {
>>>>> ++            label = "reset";
>>>>> ++            gpios = <&qcom_pinmux 54 1>;
>>>>> ++            linux,code = <KEY_RESTART>;
>>>>> ++        };
>>>>> ++
>>>>> ++        wps {
>>>>> ++            label = "wps";
>>>>> ++            gpios = <&qcom_pinmux 65 1>;
>>>>> ++            linux,code = <KEY_WPS_BUTTON>;
>>>>> ++        };
>>>>> ++    };
>>>>> ++
>>>>> ++    gpio-leds {
>>>>> ++        compatible = "gpio-leds";
>>>>> ++
>>>>> ++        usb1 {
>>>>> ++            label = "d7800:amber:usb1";
>>>>> ++            gpios = <&qcom_pinmux 7 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        usb3 {
>>>>> ++            label = "d7800:amber:usb3";
>>>>> ++            gpios = <&qcom_pinmux 8 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        status {
>>>>> ++            label = "d7800:amber:status";
>>>>> ++            gpios = <&qcom_pinmux 9 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        internet {
>>>>> ++            label = "d7800:white:internet";
>>>>> ++            gpios = <&qcom_pinmux 22 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        wan {
>>>>> ++            label = "d7800:white:wan";
>>>>> ++            gpios = <&qcom_pinmux 23 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        wps {
>>>>> ++            label = "d7800:white:wps";
>>>>> ++            gpios = <&qcom_pinmux 24 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        esata {
>>>>> ++            label = "d7800:white:esata";
>>>>> ++            gpios = <&qcom_pinmux 26 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        power {
>>>>> ++            label = "d7800:white:power";
>>>>> ++            gpios = <&qcom_pinmux 53 0>;
>>>>> ++            default-state = "on";
>>>>> ++        };
>>>>> ++
>>>>> ++        rfkill {
>>>>> ++            label = "d7800:white:rfkill";
>>>>> ++            gpios = <&qcom_pinmux 64 0>;
>>>>> ++        };
>>>>> ++
>>>>> ++        wifi5g {
>>>>> ++            label = "d7800:white:wifi5g";
>>>>> ++            gpios = <&qcom_pinmux 67 0>;
>>>>> ++        };
>>>>> ++    };
>>>>> ++};
>>>>> ++
>>>>> ++&adm_dma {
>>>>> ++    status = "ok";
>>>>> ++};
>>>>> diff --git a/target/linux/ipq806x/profiles/netgear.mk
>>>>> b/target/linux/ipq806x/profiles/netgear.mk
>>>>> index 3402f45..e1e7ed2 100644
>>>>> --- a/target/linux/ipq806x/profiles/netgear.mk
>>>>> +++ b/target/linux/ipq806x/profiles/netgear.mk
>>>>> @@ -17,4 +17,18 @@ endef
>>>>>  define Profile/R7500/Description
>>>>>      Package set for the Netgear Nighthawk X4 R7500.
>>>>>  endef
>>>>> +
>>>>> +define Profile/D7800
>>>>> +    NAME:=Netgear Nighthawk X4 D7800
>>>>> +    PACKAGES:= \
>>>>> +        kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
>>>>> +        kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
>>>>> +        kmod-ath10k wpad-mini ath10k-firmware-qca99x0
>>>>> +endef
>>>>> +
>>>>> +define Profile/D7800/Description
>>>>> +    Package set for the Netgear Nighthawk X4 D7800.
>>>>> +endef
>>>>> +
>>>>>  $(eval $(call Profile,R7500))
>>>>> +$(eval $(call Profile,D7800))
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>

Tathagata Das Dec. 25, 2015, 11:40 a.m. UTC | #5

Hi John, 

I don't why it did't reach. I sent it using git command and I got a copy
that of email. I also kept you in cc list. 

Regards, 

Tatha 

On 25-12-2015 13:19, John Crispin wrote: 

> On 24/12/2015 17:55, Tathagata Das wrote: 
> 
>> Thank you for help John.
>> 
>> I have followed those step and send the patch again. Please check.
> 
> well, we never received that mail i am afraid.
> 
> John
> 
> On 24-12-2015 21:24, John Crispin wrote:
> 
> hi
> 
> first format the patch
> 
> git format-patch HEAD~1
> 
> this will give you your patch as 0001-$some_name.patch
> 
> then call this command to send the patch
> 
> git send-email --to openwrt-devel@lists.openwrt.org
> <mailto:openwrt-devel@lists.openwrt.org> 0001-my_fix.patch
> 
> John
> 
> On 24/12/2015 14:31, Tathagata Das wrote: 
> 
> I have tried with git -send-email option. But it says command not
> supported. Could you send me the command?
> 
> On 24-12-2015 18:48, John Crispin wrote:
> 
> Hi,
> 
> your mail client replaced all tabs with spaces.
> 
> please consider using git to send patches. it will save you a lot of
> time.
> 
> John
> 
> On 24/12/2015 11:21, Tathagata Das wrote: Add support for the Netgear D7800 and build appropriate sysupgrade and
> factory images.
> 
> Known issues:
> . USB ports are not working
> . DSL is not added
> 
> Signed-off-by: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>
> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
> 
> ----
> 
> From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001 From: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>
> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
> Date: Thu, 24 Dec 2015 09:44:01 +0530
> Subject: [PATCH] Added support for Netgear D7800
> Signed-off-by: Tathagata Das <tathagata@alumnux.com
> <mailto:tathagata@alumnux.com>
> <mailto:tathagata@alumnux.com <mailto:tathagata@alumnux.com>>>
> 
> ---
> .../linux/ipq806x/base-files/etc/board.d/01_leds | 1 +
> .../ipq806x/base-files/etc/board.d/02_network | 1 +
> target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +
> .../ipq806x/base-files/lib/upgrade/platform.sh | 2 +
> target/linux/ipq806x/image/Makefile | 13 +-
> ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381
> ++++++++++++++++++++
> target/linux/ipq806x/profiles/netgear.mk | 14 +
> 7 files changed, 414 insertions(+), 1 deletions(-)
> create mode 100644
> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index 07b5b06..b32c1cc 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -11,6 +11,7 @@ board_config_update
> board=$(ipq806x_board_name)
> 
> case "$board" in
> +d7800 |\
> r7500)
> ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
> ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
> b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 1302a55..6e18297 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
> 
> case "$board" in
> ap148 |\
> +d7800 |\
> r7500)
> ucidef_add_switch "switch0" \
> "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1 <mailto:6@eth1>
> <mailto:6@eth1 <mailto:6@eth1>>"
> "5:wan" "0@eth0 <mailto:0@eth0> <mailto:0@eth0 <mailto:0@eth0>>"
> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> index 5b27bde..be48b9f 100644
> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> @@ -20,6 +20,9 @@ ipq806x_board_detect() {
> *"DB149")
> name="db149"
> ;;
> + *"D7800")
> + name="d7800"
> + ;;
> *"R7500")
> name="r7500"
> ;;
> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> index c0e19a1..2400376 100644
> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> @@ -7,6 +7,7 @@ platform_check_image() {
> 
> case "$board" in
> AP148 |\
> + d7800 |\
> r7500)
> nand_do_platform_check $board $1
> return $?;
> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
> 
> case "$board" in
> AP148 |\
> + d7800 |\
> r7500)
> nand_do_upgrade "$1"
> ;;
> diff --git a/target/linux/ipq806x/image/Makefile
> b/target/linux/ipq806x/image/Makefile
> index 14cf442..8f46af8 100644
> --- a/target/linux/ipq806x/image/Makefile
> +++ b/target/linux/ipq806x/image/Makefile
> @@ -121,6 +121,17 @@ define Device/R7500
> BOARD_NAME := r7500
> endef
> 
> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
> +define Device/D7800
> + $(call Device/DniImage)
> + DEVICE_DTS := qcom-ipq8064-d7800
> + KERNEL_SIZE := 2097152
> + NETGEAR_BOARD_ID := D7800
> + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
> + BLOCKSIZE := 128KiB
> + PAGESIZE := 2048
> + BOARD_NAME := d7800
> +endef
> +
> +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800
> 
> $(eval $(call BuildImage))
> diff --git
> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> new file mode 100644
> index 0000000..ecc1cff
> --- /dev/null
> +++
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
> 
> @@ -0,0 +1,381 @@
> +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282
> +0530
> ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581
> +0530
> +@@ -362,6 +362,7 @@
> + qcom-ipq8064-ap148.dtb \
> + qcom-ipq8064-db149.dtb \
> + qcom-ipq8064-r7500.dtb \
> ++ qcom-ipq8064-d7800.dtb \
> + qcom-msm8660-surf.dtb \
> + qcom-msm8960-cdp.dtb \
> + qcom-msm8974-sony-xperia-honami.dtb
> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01
> 05:30:00.000000000 +0530
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23
> 17:06:45.336947567 +0530
> +@@ -0,0 +1,368 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++ model = "Netgear Nighthawk X4 D7800";
> ++ compatible = "netgear,d7800", "qcom,ipq8064";
> ++
> ++ memory@0 {
> ++ reg = <0x42000000 0xe000000>;
> ++ device_type = "memory";
> ++ };
> ++
> ++ reserved-memory {
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ ranges;
> ++ rsvd@41200000 <mailto:rsvd@41200000>
> <mailto:rsvd@41200000 <mailto:rsvd@41200000>> {
> ++ reg = <0x41200000 0x300000>;
> ++ no-map;
> ++ };
> ++ };
> ++
> ++ aliases {
> ++ serial0 = &uart4;
> ++ mdio-gpio0 = &mdio0;
> ++ };
> ++
> ++ chosen {
> ++ bootargs = "rootfstype=squashfs noinitrd";
> ++ linux,stdout-path = "serial0:115200n8";
> ++ };
> ++
> ++ soc {
> ++ pinmux@800000 <mailto:pinmux@800000>
> <mailto:pinmux@800000 <mailto:pinmux@800000>> {
> ++ i2c4_pins: i2c4_pinmux {
> ++ pins = "gpio12", "gpio13";
> ++ function = "gsbi4";
> ++ bias-disable;
> ++ };
> ++
> ++ pcie0_pins: pcie0_pinmux {
> ++ mux {
> ++ pins = "gpio3";
> ++ function = "pcie1_rst";
> ++ drive-strength = <12>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ pcie1_pins: pcie1_pinmux {
> ++ mux {
> ++ pins = "gpio48";
> ++ function = "pcie2_rst";
> ++ drive-strength = <12>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ nand_pins: nand_pins {
> ++ mux {
> ++ pins = "gpio34", "gpio35", "gpio36",
> ++ "gpio37", "gpio38", "gpio39",
> ++ "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ function = "nand";
> ++ drive-strength = <10>;
> ++ bias-disable;
> ++ };
> ++ pullups {
> ++ pins = "gpio39";
> ++ bias-pull-up;
> ++ };
> ++ hold {
> ++ pins = "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ bias-bus-hold;
> ++ };
> ++ };
> ++
> ++ mdio0_pins: mdio0_pins {
> ++ mux {
> ++ pins = "gpio0", "gpio1";
> ++ function = "gpio";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ rgmii2_pins: rgmii2_pins {
> ++ mux {
> ++ pins = "gpio27", "gpio28", "gpio29", "gpio30",
> "gpio31", "gpio32",
> ++ "gpio51", "gpio52", "gpio59", "gpio60",
> "gpio61", "gpio62" ;
> ++ function = "rgmii2";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++ };
> ++
> ++ gsbi@16300000 <mailto:gsbi@16300000>
> <mailto:gsbi@16300000 <mailto:gsbi@16300000>> {
> ++ qcom,mode = <GSBI_PROT_I2C_UART>;
> ++ status = "ok";
> ++ serial@16340000 <mailto:serial@16340000>
> <mailto:serial@16340000 <mailto:serial@16340000>> {
> ++ status = "ok";
> ++ };
> ++ /*
> ++ * The i2c device on gsbi4 should not be enabled.
> ++ * On ipq806x designs gsbi4 i2c is meant for exclusive
> ++ * RPM usage. Turning this on in kernel manifests as
> ++ * i2c failure for the RPM.
> ++ */
> ++ };
> ++
> ++ sata-phy@1b400000 <mailto:sata-phy@1b400000>
> <mailto:sata-phy@1b400000 <mailto:sata-phy@1b400000>> {
> ++ status = "ok";
> ++ };
> ++
> ++ sata@29000000 <mailto:sata@29000000>
> <mailto:sata@29000000 <mailto:sata@29000000>> {
> ++ status = "ok";
> ++ };
> ++
> ++ phy@100f8800 <mailto:phy@100f8800> <mailto:phy@100f8800
> <mailto:phy@100f8800>> { /* USB3 port 1
> HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@100f8830 <mailto:phy@100f8830> <mailto:phy@100f8830
> <mailto:phy@100f8830>> { /* USB3 port 1
> SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@110f8800 <mailto:phy@110f8800> <mailto:phy@110f8800
> <mailto:phy@110f8800>> { /* USB3 port 0
> HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy@110f8830 <mailto:phy@110f8830> <mailto:phy@110f8830
> <mailto:phy@110f8830>> { /* USB3 port 0
> SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ usb30@0 {
> ++ status = "ok";
> ++ };
> ++
> ++ usb30@1 {
> ++ status = "ok";
> ++ };
> ++
> ++ pcie0: pci@1b500000 <mailto:pci@1b500000>
> <mailto:pci@1b500000 <mailto:pci@1b500000>> {
> ++ status = "ok";
> ++ reset-gpio = <&qcom_pinmux 3 0>;
> ++ pinctrl-0 = <&pcie0_pins>;
> ++ pinctrl-names = "default";
> ++ };
> ++
> ++ pcie1: pci@1b700000 <mailto:pci@1b700000>
> <mailto:pci@1b700000 <mailto:pci@1b700000>> {
> ++ status = "ok";
> ++ reset-gpio = <&qcom_pinmux 48 0>;
> ++ pinctrl-0 = <&pcie1_pins>;
> ++ pinctrl-names = "default";
> ++ };
> ++
> ++ nand@1ac00000 <mailto:nand@1ac00000>
> <mailto:nand@1ac00000 <mailto:nand@1ac00000>> {
> ++ status = "ok";
> ++
> ++ pinctrl-0 = <&nand_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ nand-ecc-strength = <4>;
> ++ nand-bus-width = <8>;
> ++
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++
> ++ qcadata@0 {
> ++ label = "qcadata";
> ++ reg = <0x0000000 0x0c80000>;
> ++ read-only;
> ++ };
> ++
> ++ APPSBL@c80000 <mailto:APPSBL@c80000>
> <mailto:APPSBL@c80000 <mailto:APPSBL@c80000>> {
> ++ label = "APPSBL";
> ++ reg = <0x0c80000 0x0500000>;
> ++ read-only;
> ++ };
> ++
> ++ APPSBLENV@1180000 <mailto:APPSBLENV@1180000>
> <mailto:APPSBLENV@1180000 <mailto:APPSBLENV@1180000>> {
> ++ label = "APPSBLENV";
> ++ reg = <0x1180000 0x0080000>;
> ++ read-only;
> ++ };
> ++
> ++ art: art@1200000 <mailto:art@1200000>
> <mailto:art@1200000 <mailto:art@1200000>> {
> ++ label = "art";
> ++ reg = <0x1200000 0x0140000>;
> ++ read-only;
> ++ };
> ++
> ++ artbak: art@1340000 <mailto:art@1340000>
> <mailto:art@1340000 <mailto:art@1340000>> {
> ++ label = "artbak";
> ++ reg = <0x1340000 0x0140000>;
> ++ read-only;
> ++ };
> ++
> ++ kernel@1480000 <mailto:kernel@1480000>
> <mailto:kernel@1480000 <mailto:kernel@1480000>> {
> ++ label = "kernel";
> ++ reg = <0x1480000 0x0200000>;
> ++ };
> ++
> ++ ubi@1680000 <mailto:ubi@1680000> <mailto:ubi@1680000
> <mailto:ubi@1680000>> {
> ++ label = "ubi";
> ++ reg = <0x1680000 0x1E00000>;
> ++ };
> ++
> ++ netgear@3480000 <mailto:netgear@3480000>
> <mailto:netgear@3480000 <mailto:netgear@3480000>> {
> ++ label = "netgear";
> ++ reg = <0x3480000 0x4480000>;
> ++ read-only;
> ++ };
> ++
> ++ reserve@7900000 <mailto:reserve@7900000>
> <mailto:reserve@7900000 <mailto:reserve@7900000>> {
> ++ label = "reserve";
> ++ reg = <0x7900000 0x0700000>;
> ++ read-only;
> ++ };
> ++
> ++ firmware@1480000 <mailto:firmware@1480000>
> <mailto:firmware@1480000 <mailto:firmware@1480000>> {
> ++ label = "firmware";
> ++ reg = <0x1480000 0x2000000>;
> ++ };
> ++
> ++ };
> ++
> ++ mdio0: mdio {
> ++ compatible = "virtual,mdio-gpio";
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++ pinctrl-0 = <&mdio0_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ phy0: ethernet-phy@0 {
> ++ device_type = "ethernet-phy";
> ++ reg = <0>;
> ++ qca,ar8327-initvals = <
> ++ 0x00004 0x7600000 /* PAD0_MODE */
> ++ 0x00008 0x1000000 /* PAD5_MODE */
> ++ 0x0000c 0x80 /* PAD6_MODE */
> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
> ++ 0x000e0 0xc74164de /* SGMII_CTRL */
> ++ 0x0007c 0x4e /* PORT0_STATUS */
> ++ 0x00094 0x4e /* PORT6_STATUS */
> ++ >;
> ++ };
> ++
> ++ phy4: ethernet-phy@4 {
> ++ device_type = "ethernet-phy";
> ++ reg = <4>;
> ++ };
> ++ };
> ++
> ++ gmac1: ethernet@37200000 <mailto:ethernet@37200000>
> <mailto:ethernet@37200000 <mailto:ethernet@37200000>> {
> ++ status = "ok";
> ++ phy-mode = "rgmii";
> ++ phy-handle = <&phy4>;
> ++ qcom,id = <1>;
> ++
> ++ pinctrl-0 = <&rgmii2_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ mtd-mac-address = <&art 6>;
> ++ };
> ++
> ++ gmac2: ethernet@37400000 <mailto:ethernet@37400000>
> <mailto:ethernet@37400000 <mailto:ethernet@37400000>> {
> ++ status = "ok";
> ++ phy-mode = "sgmii";
> ++ qcom,id = <2>;
> ++
> ++ mtd-mac-address = <&art 0>;
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++ };
> ++
> ++ gpio-keys {
> ++ compatible = "gpio-keys";
> ++
> ++ wifi {
> ++ label = "wifi";
> ++ gpios = <&qcom_pinmux 6 1>;
> ++ linux,code = <KEY_WLAN>;
> ++ };
> ++
> ++ reset {
> ++ label = "reset";
> ++ gpios = <&qcom_pinmux 54 1>;
> ++ linux,code = <KEY_RESTART>;
> ++ };
> ++
> ++ wps {
> ++ label = "wps";
> ++ gpios = <&qcom_pinmux 65 1>;
> ++ linux,code = <KEY_WPS_BUTTON>;
> ++ };
> ++ };
> ++
> ++ gpio-leds {
> ++ compatible = "gpio-leds";
> ++
> ++ usb1 {
> ++ label = "d7800:amber:usb1";
> ++ gpios = <&qcom_pinmux 7 0>;
> ++ };
> ++
> ++ usb3 {
> ++ label = "d7800:amber:usb3";
> ++ gpios = <&qcom_pinmux 8 0>;
> ++ };
> ++
> ++ status {
> ++ label = "d7800:amber:status";
> ++ gpios = <&qcom_pinmux 9 0>;
> ++ };
> ++
> ++ internet {
> ++ label = "d7800:white:internet";
> ++ gpios = <&qcom_pinmux 22 0>;
> ++ };
> ++
> ++ wan {
> ++ label = "d7800:white:wan";
> ++ gpios = <&qcom_pinmux 23 0>;
> ++ };
> ++
> ++ wps {
> ++ label = "d7800:white:wps";
> ++ gpios = <&qcom_pinmux 24 0>;
> ++ };
> ++
> ++ esata {
> ++ label = "d7800:white:esata";
> ++ gpios = <&qcom_pinmux 26 0>;
> ++ };
> ++
> ++ power {
> ++ label = "d7800:white:power";
> ++ gpios = <&qcom_pinmux 53 0>;
> ++ default-state = "on";
> ++ };
> ++
> ++ rfkill {
> ++ label = "d7800:white:rfkill";
> ++ gpios = <&qcom_pinmux 64 0>;
> ++ };
> ++
> ++ wifi5g {
> ++ label = "d7800:white:wifi5g";
> ++ gpios = <&qcom_pinmux 67 0>;
> ++ };
> ++ };
> ++};
> ++
> ++&adm_dma {
> ++ status = "ok";
> ++};
> diff --git a/target/linux/ipq806x/profiles/netgear.mk
> b/target/linux/ipq806x/profiles/netgear.mk
> index 3402f45..e1e7ed2 100644
> --- a/target/linux/ipq806x/profiles/netgear.mk
> +++ b/target/linux/ipq806x/profiles/netgear.mk
> @@ -17,4 +17,18 @@ endef
> define Profile/R7500/Description
> Package set for the Netgear Nighthawk X4 R7500.
> endef
> +
> +define Profile/D7800
> + NAME:=Netgear Nighthawk X4 D7800
> + PACKAGES:= \
> + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
> + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
> + kmod-ath10k wpad-mini ath10k-firmware-qca99x0
> +endef
> +
> +define Profile/D7800/Description
> + Package set for the Netgear Nighthawk X4 D7800.
> +endef
> +
> $(eval $(call Profile,R7500))
> +$(eval $(call Profile,D7800))

[OpenWrt-Devel] ipq806x: add support for Netgear D7800

Commit Message

Comments

Patch