diff mbox

[OpenWrt-Devel,1/3] ramips: Add DTS files for HiWiFi HC5x61 models

Message ID 550346EE-CD4E-49D9-AAFA-D63BA9E75B0C@163.com
State Superseded
Headers show

Commit Message

Comman Kang Sept. 28, 2015, 10:45 a.m. UTC
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.

The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.

Signed-off-by: Xiaoning Kang <kangxn@163.com>

Comments

Piotr Dymacz Sept. 28, 2015, 11:25 a.m. UTC | #1
Hello,

Please, take a look at other dts files in ramips target and follow the
general convention, like:
- use only model name for dts filename
- keep empty lines between nodes and between nodes and properties (ex. [1])

[1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/dts/WIZFI630A.dts#L126

Cheers,
Piotr

2015-09-28 12:45 GMT+02:00 Comman Kang <kangxn@163.com>:
> HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
>
> The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
>
> Signed-off-by: Xiaoning Kang <kangxn@163.com>
>
>
>
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
> new file mode 100644
> index 0000000..f3ca70c
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
> @@ -0,0 +1,162 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> +       compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
> +       model = "HiWiFi HC5661";
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200";
> +       };
> +
> +       palmbus@10000000 {
> +               sysc@0 {
> +                       ralink,gpiomux = "i2c", "jtag";
> +                       ralink,uartmux = "gpio";
> +                       ralink,wdtmux = <1>;
> +               };
> +               gpio0: gpio@600 {
> +                       status = "okay";
> +               };
> +               gpio2: gpio@660 {
> +                       status = "okay";
> +               };
> +               gpio3: gpio@688 {
> +                       status = "okay";
> +               };
> +
> +               spi@b00 {
> +                       status = "okay";
> +
> +                       m25p80@0 {
> +                               #address-cells = <1>;
> +                               #size-cells = <1>;
> +                               compatible = "w25q128";
> +                               reg = <0 0>;
> +                               linux,modalias = "m25p80", "w25q128";
> +                               spi-max-frequency = <10000000>;
> +
> +                               partition@0 {
> +                                       label = "u-boot";
> +                                       reg = <0x0 0x30000>;
> +                               };
> +
> +                               partition@30000 {
> +                                       label = "u-boot-env";
> +                                       reg = <0x30000 0x10000>;
> +                                       read-only;
> +                               };
> +
> +                               factory: partition@40000 {
> +                                       label = "factory";
> +                                       reg = <0x40000 0x10000>;
> +                               };
> +
> +                               partition@50000 {
> +                                       label = "firmware";
> +                                       reg = <0x50000 0xf80000>;
> +                               };
> +
> +                               partition@fd0000 {
> +                                       label = "hwf_config";
> +                                       reg = <0xfd0000 0x10000>;
> +                               };
> +
> +                               bdinfo: partition@fe0000 {
> +                                       label = "bdinfo";
> +                                       reg = <0xfe0000 0x10000>;
> +                               };
> +
> +                               partition@ff0000 {
> +                                       label = "backup";
> +                                       reg = <0xff0000 0x10000>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       ehci@101c0000 {
> +               status = "okay";
> +       };
> +
> +       ohci@101c1000 {
> +               status = "okay";
> +       };
> +
> +       ethernet@10100000 {
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ephy_pins>;
> +               mtd-mac-address = <&factory 0x4>;
> +               ralink,port-map = "wllll";
> +       };
> +
> +       sdhci@10130000 {
> +               status = "okay";
> +       };
> +
> +       wmac@10180000 {
> +               ralink,mtd-eeprom = <&factory 0>;
> +       };
> +
> +       pcie@10140000 {
> +               status = "okay";
> +       };
> +
> +       pinctrl {
> +               state_default: pinctrl0 {
> +                       gpio {
> +                               ralink,group = "uartf", "wled", "nd_sd";
> +                               ralink,function = "gpio";
> +                       };
> +                       pa {
> +                               ralink,group = "pa";
> +                               ralink,function = "pa";
> +                       };
> +               };
> +       };
> +
> +       gpio-leds {
> +               compatible = "gpio-leds";
> +               system {
> +                       label = "hiwifi-5661:blue:system";
> +                       gpios = <&gpio0 9 1>;
> +               };
> +               internet {
> +                       label = "hiwifi-5661:blue:internet";
> +                       gpios = <&gpio0 11 1>;
> +               };
> +               wlan2p4 {
> +                       label = "hiwifi-5661:blue:wlan-2p4";
> +                       gpios = <&gpio3 0 1>;
> +               };
> +               wlan5p {
> +                       label = "hiwifi-5661:blue:wlan-5p";
> +                       gpios = <&gpio0 7 1>;
> +               };
> +       };
> +
> +       gpio-keys-polled {
> +               compatible = "gpio-keys-polled";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               poll-interval = <20>;
> +               reset {
> +                       label = "reset";
> +                       gpios = <&gpio0 12 1>;
> +                       linux,code = <0x198>;
> +               };
> +       };
> +
> +       gpio_export {
> +               compatible = "gpio-export";
> +               #size-cells = <0>;
> +               usbpower {
> +                       gpio-export,name = "usbpower";
> +                       gpio-export,output = <1>;
> +                       gpios = <&gpio0 13 0>;
> +               };
> +       };
> +
> +};
> +
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
> new file mode 100644
> index 0000000..1340751
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
> @@ -0,0 +1,162 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> +       compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
> +       model = "HiWiFi HC5761";
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200";
> +       };
> +
> +       palmbus@10000000 {
> +               sysc@0 {
> +                       ralink,gpiomux = "i2c", "jtag";
> +                       ralink,uartmux = "gpio";
> +                       ralink,wdtmux = <1>;
> +               };
> +               gpio0: gpio@600 {
> +                       status = "okay";
> +               };
> +               gpio2: gpio@660 {
> +                       status = "okay";
> +               };
> +               gpio3: gpio@688 {
> +                       status = "okay";
> +               };
> +
> +               spi@b00 {
> +                       status = "okay";
> +
> +                       m25p80@0 {
> +                               #address-cells = <1>;
> +                               #size-cells = <1>;
> +                               compatible = "w25q128";
> +                               reg = <0 0>;
> +                               linux,modalias = "m25p80", "w25q128";
> +                               spi-max-frequency = <10000000>;
> +
> +                               partition@0 {
> +                                       label = "u-boot";
> +                                       reg = <0x0 0x30000>;
> +                               };
> +
> +                               partition@30000 {
> +                                       label = "u-boot-env";
> +                                       reg = <0x30000 0x10000>;
> +                                       read-only;
> +                               };
> +
> +                               factory: partition@40000 {
> +                                       label = "factory";
> +                                       reg = <0x40000 0x10000>;
> +                               };
> +
> +                               partition@50000 {
> +                                       label = "firmware";
> +                                       reg = <0x50000 0xf80000>;
> +                               };
> +
> +                               partition@fd0000 {
> +                                       label = "hwf_config";
> +                                       reg = <0xfd0000 0x10000>;
> +                               };
> +
> +                               bdinfo: partition@fe0000 {
> +                                       label = "bdinfo";
> +                                       reg = <0xfe0000 0x10000>;
> +                               };
> +
> +                               partition@ff0000 {
> +                                       label = "backup";
> +                                       reg = <0xff0000 0x10000>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       ehci@101c0000 {
> +               status = "okay";
> +       };
> +
> +       ohci@101c1000 {
> +               status = "okay";
> +       };
> +
> +       ethernet@10100000 {
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ephy_pins>;
> +               mtd-mac-address = <&factory 0x4>;
> +               ralink,port-map = "wllll";
> +       };
> +
> +       sdhci@10130000 {
> +               status = "okay";
> +       };
> +
> +       wmac@10180000 {
> +               ralink,mtd-eeprom = <&factory 0>;
> +       };
> +
> +       pcie@10140000 {
> +               status = "okay";
> +       };
> +
> +       pinctrl {
> +               state_default: pinctrl0 {
> +                       gpio {
> +                               ralink,group = "uartf", "wled", "nd_sd";
> +                               ralink,function = "gpio";
> +                       };
> +                       pa {
> +                               ralink,group = "pa";
> +                               ralink,function = "pa";
> +                       };
> +               };
> +       };
> +
> +       gpio-leds {
> +               compatible = "gpio-leds";
> +               system {
> +                       label = "hiwifi-5761:blue:system";
> +                       gpios = <&gpio0 9 1>;
> +               };
> +               internet {
> +                       label = "hiwifi-5761:blue:internet";
> +                       gpios = <&gpio0 11 1>;
> +               };
> +               wlan2p4 {
> +                       label = "hiwifi-5761:blue:wlan-2p4";
> +                       gpios = <&gpio3 0 1>;
> +               };
> +               wlan5p {
> +                       label = "hiwifi-5761:blue:wlan-5p";
> +                       gpios = <&gpio0 7 1>;
> +               };
> +       };
> +
> +       gpio-keys-polled {
> +               compatible = "gpio-keys-polled";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               poll-interval = <20>;
> +               reset {
> +                       label = "reset";
> +                       gpios = <&gpio0 12 1>;
> +                       linux,code = <0x198>;
> +               };
> +       };
> +
> +       gpio_export {
> +               compatible = "gpio-export";
> +               #size-cells = <0>;
> +               usbpower {
> +                       gpio-export,name = "usbpower";
> +                       gpio-export,output = <1>;
> +                       gpios = <&gpio0 13 0>;
> +               };
> +       };
> +
> +};
> +
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
> new file mode 100644
> index 0000000..2d68e69
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
> @@ -0,0 +1,203 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> +       compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
> +       model = "HiWiFi HC5861";
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200";
> +       };
> +
> +       palmbus@10000000 {
> +               sysc@0 {
> +                       ralink,gpiomux = "i2c", "jtag";
> +                       ralink,uartmux = "gpio";
> +                       ralink,wdtmux = <1>;
> +               };
> +               gpio0: gpio@600 {
> +                       status = "okay";
> +               };
> +               gpio2: gpio@660 {
> +                       status = "okay";
> +               };
> +               gpio3: gpio@688 {
> +                       status = "okay";
> +               };
> +
> +               spi@b00 {
> +                       status = "okay";
> +
> +                       m25p80@0 {
> +                               #address-cells = <1>;
> +                               #size-cells = <1>;
> +                               compatible = "w25q128";
> +                               reg = <0 0>;
> +                               linux,modalias = "m25p80", "w25q128";
> +                               spi-max-frequency = <10000000>;
> +
> +                               partition@0 {
> +                                       label = "u-boot";
> +                                       reg = <0x0 0x30000>;
> +                               };
> +
> +                               partition@30000 {
> +                                       label = "u-boot-env";
> +                                       reg = <0x30000 0x10000>;
> +                                       read-only;
> +                               };
> +
> +                               factory: partition@40000 {
> +                                       label = "factory";
> +                                       reg = <0x40000 0x10000>;
> +                               };
> +
> +                               partition@50000 {
> +                                       label = "firmware";
> +                                       reg = <0x50000 0xf80000>;
> +                               };
> +
> +                               partition@fd0000 {
> +                                       label = "hwf_config";
> +                                       reg = <0xfd0000 0x10000>;
> +                               };
> +
> +                               bdinfo: partition@fe0000 {
> +                                       label = "bdinfo";
> +                                       reg = <0xfe0000 0x10000>;
> +                               };
> +
> +                               partition@ff0000 {
> +                                       label = "backup";
> +                                       reg = <0xff0000 0x10000>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       ehci@101c0000 {
> +               status = "okay";
> +       };
> +
> +       ohci@101c1000 {
> +               status = "okay";
> +       };
> +
> +       ethernet@10100000 {
> +               status = "okay";
> +               mtd-mac-address = <&factory 0x4>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
> +
> +               ralink,port-map = "wllll";
> +
> +               port@4 {
> +                       status = "okay";
> +                       phy-handle = <&phy4>;
> +                       phy-mode = "rgmii";
> +               };
> +
> +               port@5 {
> +                       status = "okay";
> +                       phy-handle = <&phy5>;
> +                       phy-mode = "rgmii";
> +               };
> +
> +               mdio-bus {
> +                       status = "okay";
> +
> +                       phy4: ethernet-phy@4 {
> +                               reg = <4>;
> +                               phy-mode = "rgmii";
> +                       };
> +
> +                       phy5: ethernet-phy@5 {
> +                               reg = <5>;
> +                               phy-mode = "rgmii";
> +                       };
> +               };
> +       };
> +
> +       gsw@10110000 {
> +               ralink,port4 = "gmac";
> +       };
> +
> +       sdhci@10130000 {
> +               status = "okay";
> +       };
> +
> +       wmac@10180000 {
> +               ralink,mtd-eeprom = <&factory 0>;
> +       };
> +
> +       pcie@10140000 {
> +               status = "okay";
> +       };
> +
> +       pinctrl {
> +               state_default: pinctrl0 {
> +                       gpio {
> +                               ralink,group = "uartf", "wled", "nd_sd";
> +                               ralink,function = "gpio";
> +                       };
> +                       pa {
> +                               ralink,group = "pa";
> +                               ralink,function = "pa";
> +                       };
> +               };
> +       };
> +
> +       gpio-leds {
> +               compatible = "gpio-leds";
> +               system {
> +                       label = "hiwifi-5861:blue:system";
> +                       gpios = <&gpio0 9 1>;
> +               };
> +               wlan2p4 {
> +                       label = "hiwifi-5861:blue:wlan-2p4";
> +                       gpios = <&gpio0 11 1>;
> +               };
> +               internet {
> +                       label = "hiwifi-5861:blue:internet";
> +                       gpios = <&gpio3 0 1>;
> +               };
> +               wlan5p {
> +                       label = "hiwifi-5861:blue:wlan-5p";
> +                       gpios = <&gpio0 7 1>;
> +               };
> +               turbo {
> +                       label = "hiwifi-5861:blue:turbo";
> +                       gpios = <&gpio0 10 1>;
> +               };
> +       };
> +
> +       gpio-keys-polled {
> +               compatible = "gpio-keys-polled";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               poll-interval = <20>;
> +               reset {
> +                       label = "reset";
> +                       gpios = <&gpio0 12 1>;
> +                       linux,code = <0x198>;
> +               };
> +       };
> +
> +       gpio_export {
> +               compatible = "gpio-export";
> +               #size-cells = <0>;
> +               usbpower {
> +                       gpio-export,name = "usbpower";
> +                       gpio-export,output = <0>;
> +                       gpios = <&gpio0 13 0>;
> +               };
> +               sdpower {
> +                       gpio-export,name = "sdpower";
> +                       gpio-export,output = <0>;
> +                       gpios = <&gpio0 8 0>;
> +               };
> +       };
> +
> +};
> +
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Comman Kang Sept. 28, 2015, 2:49 p.m. UTC | #2
Done, Thanks for the comment, please take a look at V2




在 15/9/28 下午7:25,“Piotr Dymacz”<pepe2k@gmail.com> 写入:

>Hello,
>
>Please, take a look at other dts files in ramips target and follow the
>general convention, like:
>- use only model name for dts filename
>- keep empty lines between nodes and between nodes and properties (ex. [1])
>
>[1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/dts/WIZFI630A.dts#L126
>
>Cheers,
>Piotr
>
>2015-09-28 12:45 GMT+02:00 Comman Kang <kangxn@163.com>:
>> HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
>>
>> The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
>>
>> Signed-off-by: Xiaoning Kang <kangxn@163.com>
>>
>>
>>
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
>> new file mode 100644
>> index 0000000..f3ca70c
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
>> @@ -0,0 +1,162 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5661";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus@10000000 {
>> +               sysc@0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio@600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio@660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio@688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi@b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80@0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition@0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition@30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition@40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition@50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition@fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition@fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition@ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci@101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci@101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet@10100000 {
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&ephy_pins>;
>> +               mtd-mac-address = <&factory 0x4>;
>> +               ralink,port-map = "wllll";
>> +       };
>> +
>> +       sdhci@10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac@10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie@10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5661:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5661:blue:internet";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5661:blue:wlan-2p4";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5661:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <1>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
>> new file mode 100644
>> index 0000000..1340751
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
>> @@ -0,0 +1,162 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5761";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus@10000000 {
>> +               sysc@0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio@600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio@660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio@688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi@b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80@0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition@0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition@30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition@40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition@50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition@fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition@fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition@ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci@101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci@101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet@10100000 {
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&ephy_pins>;
>> +               mtd-mac-address = <&factory 0x4>;
>> +               ralink,port-map = "wllll";
>> +       };
>> +
>> +       sdhci@10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac@10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie@10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5761:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5761:blue:internet";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5761:blue:wlan-2p4";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5761:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <1>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
>> new file mode 100644
>> index 0000000..2d68e69
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
>> @@ -0,0 +1,203 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5861";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus@10000000 {
>> +               sysc@0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio@600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio@660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio@688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi@b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80@0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition@0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition@30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition@40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition@50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition@fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition@fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition@ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci@101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci@101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet@10100000 {
>> +               status = "okay";
>> +               mtd-mac-address = <&factory 0x4>;
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
>> +
>> +               ralink,port-map = "wllll";
>> +
>> +               port@4 {
>> +                       status = "okay";
>> +                       phy-handle = <&phy4>;
>> +                       phy-mode = "rgmii";
>> +               };
>> +
>> +               port@5 {
>> +                       status = "okay";
>> +                       phy-handle = <&phy5>;
>> +                       phy-mode = "rgmii";
>> +               };
>> +
>> +               mdio-bus {
>> +                       status = "okay";
>> +
>> +                       phy4: ethernet-phy@4 {
>> +                               reg = <4>;
>> +                               phy-mode = "rgmii";
>> +                       };
>> +
>> +                       phy5: ethernet-phy@5 {
>> +                               reg = <5>;
>> +                               phy-mode = "rgmii";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gsw@10110000 {
>> +               ralink,port4 = "gmac";
>> +       };
>> +
>> +       sdhci@10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac@10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie@10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5861:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5861:blue:wlan-2p4";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5861:blue:internet";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5861:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +               turbo {
>> +                       label = "hiwifi-5861:blue:turbo";
>> +                       gpios = <&gpio0 10 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <0>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +               sdpower {
>> +                       gpio-export,name = "sdpower";
>> +                       gpio-export,output = <0>;
>> +                       gpios = <&gpio0 8 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
diff mbox

Patch

diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
new file mode 100644
index 0000000..f3ca70c
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
@@ -0,0 +1,162 @@ 
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5661";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xf80000>;
+				};
+
+				partition@fd0000 {
+					label = "hwf_config";
+					reg = <0xfd0000 0x10000>;
+				};
+
+				bdinfo: partition@fe0000 {
+					label = "bdinfo";
+					reg = <0xfe0000 0x10000>;
+				};
+
+				partition@ff0000 {
+					label = "backup";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "wllll";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "uartf", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+			pa {
+				ralink,group = "pa";
+				ralink,function = "pa";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		system {
+			label = "hiwifi-5661:blue:system";
+			gpios = <&gpio0 9 1>;
+		};
+		internet {
+			label = "hiwifi-5661:blue:internet";
+			gpios = <&gpio0 11 1>;
+		};
+		wlan2p4 {
+			label = "hiwifi-5661:blue:wlan-2p4";
+			gpios = <&gpio3 0 1>;
+		};
+		wlan5p {
+			label = "hiwifi-5661:blue:wlan-5p";
+			gpios = <&gpio0 7 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 13 0>;
+		};
+	};
+
+};
+
diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
new file mode 100644
index 0000000..1340751
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
@@ -0,0 +1,162 @@ 
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5761";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xf80000>;
+				};
+
+				partition@fd0000 {
+					label = "hwf_config";
+					reg = <0xfd0000 0x10000>;
+				};
+
+				bdinfo: partition@fe0000 {
+					label = "bdinfo";
+					reg = <0xfe0000 0x10000>;
+				};
+
+				partition@ff0000 {
+					label = "backup";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "wllll";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "uartf", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+			pa {
+				ralink,group = "pa";
+				ralink,function = "pa";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		system {
+			label = "hiwifi-5761:blue:system";
+			gpios = <&gpio0 9 1>;
+		};
+		internet {
+			label = "hiwifi-5761:blue:internet";
+			gpios = <&gpio0 11 1>;
+		};
+		wlan2p4 {
+			label = "hiwifi-5761:blue:wlan-2p4";
+			gpios = <&gpio3 0 1>;
+		};
+		wlan5p {
+			label = "hiwifi-5761:blue:wlan-5p";
+			gpios = <&gpio0 7 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 13 0>;
+		};
+	};
+
+};
+
diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
new file mode 100644
index 0000000..2d68e69
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
@@ -0,0 +1,203 @@ 
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5861";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xf80000>;
+				};
+
+				partition@fd0000 {
+					label = "hwf_config";
+					reg = <0xfd0000 0x10000>;
+				};
+
+				bdinfo: partition@fe0000 {
+					label = "bdinfo";
+					reg = <0xfe0000 0x10000>;
+				};
+
+				partition@ff0000 {
+					label = "backup";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+		mtd-mac-address = <&factory 0x4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+		ralink,port-map = "wllll";
+
+		port@4 {
+			status = "okay";
+			phy-handle = <&phy4>;
+			phy-mode = "rgmii";
+		};
+
+		port@5 {
+			status = "okay";
+			phy-handle = <&phy5>;
+			phy-mode = "rgmii";
+		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				phy-mode = "rgmii";
+			};
+
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "gmac";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "uartf", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+			pa {
+				ralink,group = "pa";
+				ralink,function = "pa";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		system {
+			label = "hiwifi-5861:blue:system";
+			gpios = <&gpio0 9 1>;
+		};
+		wlan2p4 {
+			label = "hiwifi-5861:blue:wlan-2p4";
+			gpios = <&gpio0 11 1>;
+		};
+		internet {
+			label = "hiwifi-5861:blue:internet";
+			gpios = <&gpio3 0 1>;
+		};
+		wlan5p {
+			label = "hiwifi-5861:blue:wlan-5p";
+			gpios = <&gpio0 7 1>;
+		};
+		turbo {
+			label = "hiwifi-5861:blue:turbo";
+			gpios = <&gpio0 10 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 13 0>;
+		};
+		sdpower {
+			gpio-export,name = "sdpower";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 8 0>;
+		};
+	};
+
+};
+