diff mbox series

[22.03] ipq40xx: luma_wrtq-acn329: swap ethernet MAC addresses

Message ID 20221003131859.7081-1-tmn505@terefe.re
State Accepted
Delegated to: Hauke Mehrtens
Headers show
Series [22.03] ipq40xx: luma_wrtq-acn329: swap ethernet MAC addresses | expand

Commit Message

Tomasz Maciej Nowak Oct. 3, 2022, 1:18 p.m. UTC
From: Tomasz Maciej Nowak <tmn505@gmail.com>

Adjust them according to OEM firmware.

Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
This is different than
where I made a blunder and tested the change with DSA patches enabled,
which made the change absolutely moot on pre-DSA driver. Since the DSA
series was about to be accepted I didn't send the revert and causing
more noise. Sorry.

 .../files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts     | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series


diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
index 5b0c8cf10690..0eed441a2d75 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -9,6 +9,11 @@ 
 	model = "Luma Home WRTQ-329ACN";
 	compatible = "luma,wrtq-329acn";
+	aliases {
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+	};
 	i2c-gpio {
 		compatible = "i2c-gpio";
 		sda-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;