@@ -1,3 +1,10 @@
+This enables automatic connection after the control daemon is started,
+and also stops the connection on termination.
+
+Using the autoboot restart command is necessary because the stop command
+doesn't actually stop the connection, and would also leave the driver in
+a state where an explicit start command is necessary to connect again.
+
--- a/src/dsl_cpe_init_cfg.c
+++ b/src/dsl_cpe_init_cfg.c
@@ -27,7 +27,7 @@ DSL_InitData_t gInitCfgData =
@@ -9,3 +16,71 @@
DSL_CPE_AUTOBOOT_CFG_SET(DSL_FALSE, DSL_FALSE, DSL_FALSE),
DSL_CPE_TEST_MODE_CTRL_SET(DSL_TESTMODE_DISABLE),
DSL_CPE_LINE_ACTIVATE_CTRL_SET(DSL_G997_INHIBIT_LDSF, DSL_G997_INHIBIT_ACSF, DSL_G997_NORMAL_STARTUP),
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -6515,10 +6515,13 @@ DSL_CPE_STATIC void DSL_CPE_Termination
+ DSL_CPE_STATIC DSL_void_t DSL_CPE_Termination (void)
+ {
+ #ifdef INCLUDE_DSL_CPE_CLI_SUPPORT
+- DSL_int_t nDevice = 0;
+ DSL_char_t buf[32] = "quit";
+ #endif
+
++ DSL_Error_t nRet = DSL_SUCCESS;
++ DSL_int_t nDevice = 0;
++ DSL_AutobootConfig_t sAutobootCfg;
++ DSL_AutobootControl_t sAutobootCtl;
+ DSL_CPE_Control_Context_t *pCtrlCtx;
+
+ pCtrlCtx = DSL_CPE_GetGlobalContext();
+@@ -6527,6 +6530,50 @@ DSL_CPE_STATIC DSL_void_t DSL_CPE_Termi
+ pCtrlCtx->bRun = DSL_FALSE;
+ }
+
++ for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; ++nDevice)
++ {
++ g_bWaitBeforeConfigWrite[nDevice] = DSL_TRUE;
++ g_bWaitBeforeLinkActivation[nDevice] = DSL_TRUE;
++ g_bWaitBeforeRestart[nDevice] = DSL_TRUE;
++
++ g_bAutoContinueWaitBeforeConfigWrite[nDevice] = DSL_FALSE;
++ g_bAutoContinueWaitBeforeLinkActivation[nDevice] = DSL_FALSE;
++ g_bAutoContinueWaitBeforeRestart[nDevice] = DSL_FALSE;
++
++ memset(&sAutobootCfg, 0x0, sizeof(DSL_AutobootConfig_t));
++ sAutobootCfg.data.nStateMachineOptions.bWaitBeforeConfigWrite = DSL_TRUE;
++ sAutobootCfg.data.nStateMachineOptions.bWaitBeforeLinkActivation = DSL_TRUE;
++ sAutobootCfg.data.nStateMachineOptions.bWaitBeforeRestart = DSL_TRUE;
++
++ nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++ DSL_CPE_GetGlobalContext()->fd[nDevice],
++ DSL_FIO_AUTOBOOT_CONFIG_SET, (DSL_int_t)&sAutobootCfg);
++
++ if (nRet < DSL_SUCCESS)
++ {
++ DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++ "Autoboot configuration for device (%d) failed!, nRet = %d!"
++ DSL_CPE_CRLF, nDevice, sAutobootCtl.accessCtl.nReturn));
++ }
++
++ memset(&sAutobootCtl, 0, sizeof(DSL_AutobootControl_t));
++ sAutobootCtl.data.nCommand = DSL_AUTOBOOT_CTRL_RESTART;
++
++ nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++ DSL_CPE_GetGlobalContext()->fd[nDevice],
++ DSL_FIO_AUTOBOOT_CONTROL_SET, (DSL_int_t)&sAutobootCtl);
++
++ if (nRet < DSL_SUCCESS)
++ {
++ DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++ "Autoboot restart for device (%d) failed!, nRet = %d!"
++ DSL_CPE_CRLF, nDevice, sAutobootCtl.accessCtl.nReturn));
++ }
++ }
++
++ DSL_CCA_DEBUG(DSL_CCA_DBG_MSG, (DSL_CPE_PREFIX
++ "Autoboot restart executed" DSL_CPE_CRLF));
++
+ #ifdef INCLUDE_DSL_CPE_CLI_SUPPORT
+ for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; nDevice++)
+ {
@@ -9,7 +9,7 @@
{
DSL_CCA_DEBUG(DSL_CCA_DBG_MSG, (DSL_CPE_PREFIX "terminated" DSL_CPE_CRLF));
DSL_CPE_Termination ();
-@@ -6756,6 +6756,7 @@ DSL_int_t dsl_cpe_daemon (
+@@ -6803,6 +6803,7 @@ DSL_int_t dsl_cpe_daemon (
#ifndef RTEMS
signal (SIGINT, DSL_CPE_TerminationHandler);
@@ -10,7 +10,7 @@
DSL_char_t *g_sFirmwareName1 = DSL_NULL;
DSL_FirmwareFeatures_t g_nFwFeatures1 = {DSL_FW_XDSLMODE_CLEANED, DSL_FW_XDSLFEATURE_CLEANED,
DSL_FW_XDSLFEATURE_CLEANED};
-@@ -6759,6 +6762,8 @@ DSL_int_t dsl_cpe_daemon (
+@@ -6806,6 +6809,8 @@ DSL_int_t dsl_cpe_daemon (
signal (SIGTERM, DSL_CPE_TerminationHandler);
#endif /* RTEMS*/
@@ -19,7 +19,7 @@
/* Open DSL_CPE_MAX_DSL_ENTITIES devices*/
for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; nDevice++)
{
-@@ -7213,6 +7218,7 @@ DSL_int_t dsl_cpe_daemon (
+@@ -7260,6 +7265,7 @@ DSL_int_t dsl_cpe_daemon (
#endif /* INCLUDE_DSL_CPE_CLI_SUPPORT */
DSL_CPE_CONTROL_EXIT:
Stop the connection when the control daemon is terminated. The code is a modified version of the termination routine in version 4.23.1 of the daemon (which doesn't support VR9 modems anymore). This could also be implemented by calling the acos and acs commands via dsl_cpe_pipe.sh in the init script. However, doing it in the daemon itself has the advantage of also working if it is terminated in another way (for example during sysupgrade). Signed-off-by: Jan Hoffmann <jan@3e8.eu> --- .../ltq-vdsl-app/patches/200-autoboot.patch | 75 +++++++++++++++++++ .../ltq-vdsl-app/patches/201-sigterm.patch | 2 +- .../ltq-vdsl-app/patches/300-ubus.patch | 4 +- 3 files changed, 78 insertions(+), 3 deletions(-)