diff mbox series

[10/13] realtek: switch target to upstream platform

Message ID 20211208214309.233041-11-sander@svanheule.net
State Superseded
Headers show
Series Switch realtek target to upstream platform | expand

Commit Message

Sander Vanheule Dec. 8, 2021, 9:43 p.m. UTC 
Use the upstream MACH_REALTEK_RTL platform instead of the downstream
RTL83XX platform. This effectively deprecates the original platform.

The updated config was generated by kernel_oldconfig, using the defaults
for the now available symbols.

Since the upstream platform is based on MIPS_GENERIC, the kernel load
and entry addresses need to be updated to match the expected values.

Co-developed-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
 target/linux/realtek/config-5.10    | 36 ++++++++++++++++++++++++-----
 target/linux/realtek/image/Makefile |  4 ++--
 2 files changed, 32 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/target/linux/realtek/config-5.10 b/target/linux/realtek/config-5.10
index f75cf92897ad..eb3eb0e2b51c 100644
--- a/target/linux/realtek/config-5.10
+++ b/target/linux/realtek/config-5.10
@@ -1,9 +1,7 @@ 
 CONFIG_AQUANTIA_PHY=y
 CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_MMAP_RND_BITS_MAX=15
 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -25,8 +23,11 @@  CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
 CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_RMAP=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
@@ -89,6 +90,7 @@  CONFIG_I2C_GPIO=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_MIPS_CPU=y
 CONFIG_IRQ_WORK=y
@@ -99,6 +101,7 @@  CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_LIBFDT=y
 CONFIG_LLD_VERSION=0
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MACH_REALTEK_RTL=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BUS=y
 CONFIG_MDIO_DEVICE=y
@@ -110,17 +113,24 @@  CONFIG_MIGRATION=y
 CONFIG_MIPS=y
 CONFIG_MIPS_ASID_BITS=8
 CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
 CONFIG_MIPS_CLOCK_VSYSCALL=y
 # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
 # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_MIPS_CMDLINE_FROM_DTB=y
+CONFIG_MIPS_EBPF_JIT=y
 # CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_GENERIC=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+CONFIG_MIPS_MT=y
+CONFIG_MIPS_MT_FPAFF=y
+CONFIG_MIPS_MT_SMP=y
 # CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_NR_CPU_NR_MAP=2
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 CONFIG_MIPS_RAW_APPENDED_DTB=y
 CONFIG_MIPS_SPRAM=y
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_GEOMETRY=y
@@ -133,14 +143,15 @@  CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_TPLINK_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_DEVLINK=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_RTL83XX=y
 CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_RTL838X=y
 CONFIG_NET_SWITCHDEV=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NR_CPUS=2
 CONFIG_NVMEM=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
@@ -151,6 +162,7 @@  CONFIG_OF_IRQ=y
 CONFIG_OF_KOBJ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_NET=y
+CONFIG_PADATA=y
 CONFIG_PCI_DRIVERS_LEGACY=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
@@ -160,6 +172,8 @@  CONFIG_PINCTRL=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
 CONFIG_RATIONAL=y
 CONFIG_REALTEK_OTTO_WDT=y
 CONFIG_REALTEK_PHY=y
@@ -167,16 +181,20 @@  CONFIG_REALTEK_SOC_PHY=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL838X=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
 CONFIG_RTL9300_TIMER=y
 CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SFP=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
 CONFIG_SRCU=y
 CONFIG_SWPHY=y
+CONFIG_SYNC_R4K=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
@@ -185,13 +203,19 @@  CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_VPE_LOADER=y
 CONFIG_TARGET_ISA_REV=2
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
 CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile
index a7961970a302..84cfc5a9c679 100644
--- a/target/linux/realtek/image/Makefile
+++ b/target/linux/realtek/image/Makefile
@@ -3,8 +3,8 @@ 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-KERNEL_LOADADDR = 0x80000000
-KERNEL_ENTRY = 0x80000400
+KERNEL_LOADADDR = 0x80100000
+KERNEL_ENTRY = 0x80100400
 
 DEVICE_VARS += ZYXEL_VERS