diff mbox series

mvebu: remove Linux 5.4 support

Message ID 20211002102642.1423-1-rsalvaterra@gmail.com
State Superseded
Headers show
Series mvebu: remove Linux 5.4 support | expand

Commit Message

Rui Salvaterra Oct. 2, 2021, 10:26 a.m. UTC
We don't need it anymore, as 5.10 has been promoted to stable.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
---
 target/linux/mvebu/config-5.4                 |  421 ------
 target/linux/mvebu/cortexa53/config-5.4       |   92 --
 target/linux/mvebu/cortexa72/config-5.4       |   99 --
 .../marvell/armada-3720-espressobin-emmc.dts  |   28 -
 .../armada-3720-espressobin-v7-emmc.dts       |   43 -
 .../marvell/armada-3720-espressobin-v7.dts    |   31 -
 ...l-Add-support-for-Marvell-CN9130-SoC.patch |   55 -
 ...t-for-endpoint-to-be-ready-before-tr.patch |   50 -
 ...64-dts-marvell-Add-support-for-CP115.patch |   30 -
 ...ll-Prepare-the-introduction-of-CP115.patch | 1318 -----------------
 ...ntroduce-mvneta_update_stats-routine.patch |   95 --
 ...ell-Add-support-for-AP807-AP807-quad.patch |  102 --
 ...duce-page-pool-API-for-sw-buffer-man.patch |  181 ---
 ...ell-Add-AP807-quad-cache-description.patch |   87 --
 ...on-build_skb-in-mvneta_rx_swbm-poll-.patch |  303 ----
 ...l-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch |  135 --
 ...006-net-mvneta-add-basic-XDP-support.patch |  311 ----
 ...l-Externalize-PCIe-macros-from-CP11x.patch |  129 --
 ...avoid_error_message_for_optional_IRQ.patch |   31 -
 ...header-prefetch-in-mvneta_swbm_rx_fr.patch |   43 -
 ...ell-Enumerate-the-first-AP806-syscon.patch |   25 -
 ...mvneta-make-tx-buffer-array-agnostic.patch |  210 ---
 ...l-Prepare-the-introduction-of-AP807-.patch |  937 ------------
 .../009-net-mvneta-add-XDP_TX-support.patch   |  175 ---
 ...l-Move-clocks-to-AP806-specific-file.patch |   65 -
 ...fix-build-skb-for-bm-capable-devices.patch |   41 -
 ...-arm64-dts-uDPU-remove-i2c-fast-mode.patch |   31 -
 ...ts-uDPU-SFP-cages-support-3W-modules.patch |   34 -
 ...on-page_pool_recycle_direct-in-mvnet.patch |   39 -
 ...sallow-XDP-program-on-hardware-buffe.patch |   53 -
 ...DP-support-if-sw-bm-is-used-as-fallb.patch |   67 -
 ...in-link-immediately-after-enabling-t.patch |   60 -
 ...7-PCI-aardvark-Improve-link-training.patch |  208 ---
 ...18-PCI-aardvark-Issue-PERST-via-GPIO.patch |  123 --
 .../019-PCI-aardvark-Add-PHY-support.patch    |  152 --
 ...l-armada-37xx-Set-pcie_reset_pin-to-.patch |   93 --
 ...l-armada-37xx-Move-PCIe-comphy-handl.patch |   57 -
 ...l-armada-37xx-Move-PCIe-max-link-spe.patch |   44 -
 ...-arm64-dts-add-uDPU-i2c-bus-recovery.patch |   53 -
 ...-t-touch-PCIe-registers-if-no-card-c.patch |   50 -
 ...add-driver-for-LinkStation-power-off.patch |  207 ---
 ...-initialization-with-old-Marvell-s-A.patch |   44 -
 ...l-espressobin-Add-ethernet-switch-al.patch |   88 --
 ...s-mcbin-singleshot-add-heartbeat-LED.patch |   65 -
 ...is-omnia-enable-HW-buffer-management.patch |   74 -
 ...rris-omnia-add-comphy-handle-to-eth2.patch |   37 -
 ...rris-omnia-describe-switch-interrupt.patch |   61 -
 ...32-ARM-dts-turris-omnia-add-SFP-node.patch |   90 --
 ...te-ethernet-phy-node-and-handle-name.patch |   52 -
 ...omnia-fix-hardware-buffer-management.patch |   33 -
 ...Mangle-bootloader-s-kernel-arguments.patch |  208 ---
 ...-mvebu-armada-38x-enable-libata-leds.patch |   10 -
 .../patches-5.4/302-add_powertables.patch     |  770 ----------
 ...3-linksys_hardcode_nand_ecc_settings.patch |   17 -
 .../patches-5.4/304-revert_i2c_delay.patch    |   15 -
 .../305-armada-385-rd-mtd-partitions.patch    |   19 -
 .../306-ARM-mvebu-385-ap-Add-partitions.patch |   35 -
 ...-armada-xp-linksys-mamba-broken-idle.patch |   10 -
 .../308-armada-xp-linksys-mamba-wan.patch     |   11 -
 .../patches-5.4/309-linksys-status-led.patch  |   50 -
 .../310-linksys-use-eth0-as-cpu-port.patch    |   25 -
 .../311-adjust-compatible-for-linksys.patch   |   68 -
 ...da388-clearfog-emmc-on-clearfog-base.patch |   87 --
 .../312-helios4-dts-status-led-alias.patch    |   25 -
 ...ts-marvell-armada37xx-Add-eth0-alias.patch |   20 -
 ...l-armada-3720-espressobin-add-ports-.patch |   26 -
 ...witch-PHY-operation-mode-to-2500base.patch |   34 -
 ...rmada-xp-linksys-mamba-resize-kernel.patch |   37 -
 ...320-armada-370-dts-fix-crypto-engine.patch |   29 -
 .../patches-5.4/400-find_active_root.patch    |   60 -
 .../700-mvneta-tx-queue-workaround.patch      |   38 -
 ...dicate-failure-to-enter-deeper-sleep.patch |   40 -
 ...-pci-mvebu-time-out-reset-on-link-up.patch |   60 -
 73 files changed, 8546 deletions(-)
 delete mode 100644 target/linux/mvebu/config-5.4
 delete mode 100644 target/linux/mvebu/cortexa53/config-5.4
 delete mode 100644 target/linux/mvebu/cortexa72/config-5.4
 delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
 delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
 delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
 delete mode 100644 target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/302-add_powertables.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/400-find_active_root.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
 delete mode 100644 target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch

Comments

Adrian Schmutzler Oct. 2, 2021, 4:03 p.m. UTC | #1
Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org]
> On Behalf Of Rui Salvaterra
> Sent: Samstag, 2. Oktober 2021 12:27
> To: openwrt-devel@lists.openwrt.org
> Cc: hauke@hauke-m.de; daniel@makrotopia.org;
> pepe.schlehofer@gmail.com; tmn505@gmail.com; Rui Salvaterra
> <rsalvaterra@gmail.com>
> Subject: [PATCH] mvebu: remove Linux 5.4 support
> 
> We don't need it anymore, as 5.10 has been promoted to stable.

I've just picked Paul's similar patch from GitHub and will merge it tonight.

Best

Adrian

> 
> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
> ---
>  target/linux/mvebu/config-5.4                 |  421 ------
>  target/linux/mvebu/cortexa53/config-5.4       |   92 --
>  target/linux/mvebu/cortexa72/config-5.4       |   99 --
>  .../marvell/armada-3720-espressobin-emmc.dts  |   28 -
>  .../armada-3720-espressobin-v7-emmc.dts       |   43 -
>  .../marvell/armada-3720-espressobin-v7.dts    |   31 -
>  ...l-Add-support-for-Marvell-CN9130-SoC.patch |   55 -
>  ...t-for-endpoint-to-be-ready-before-tr.patch |   50 -
>  ...64-dts-marvell-Add-support-for-CP115.patch |   30 -
>  ...ll-Prepare-the-introduction-of-CP115.patch | 1318 -----------------
>  ...ntroduce-mvneta_update_stats-routine.patch |   95 --
>  ...ell-Add-support-for-AP807-AP807-quad.patch |  102 --
>  ...duce-page-pool-API-for-sw-buffer-man.patch |  181 ---
>  ...ell-Add-AP807-quad-cache-description.patch |   87 --
>  ...on-build_skb-in-mvneta_rx_swbm-poll-.patch |  303 ----
>  ...l-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch |  135 --
>  ...006-net-mvneta-add-basic-XDP-support.patch |  311 ----
>  ...l-Externalize-PCIe-macros-from-CP11x.patch |  129 --
>  ...avoid_error_message_for_optional_IRQ.patch |   31 -
>  ...header-prefetch-in-mvneta_swbm_rx_fr.patch |   43 -
>  ...ell-Enumerate-the-first-AP806-syscon.patch |   25 -
>  ...mvneta-make-tx-buffer-array-agnostic.patch |  210 ---
>  ...l-Prepare-the-introduction-of-AP807-.patch |  937 ------------
>  .../009-net-mvneta-add-XDP_TX-support.patch   |  175 ---
>  ...l-Move-clocks-to-AP806-specific-file.patch |   65 -
>  ...fix-build-skb-for-bm-capable-devices.patch |   41 -
>  ...-arm64-dts-uDPU-remove-i2c-fast-mode.patch |   31 -
>  ...ts-uDPU-SFP-cages-support-3W-modules.patch |   34 -
>  ...on-page_pool_recycle_direct-in-mvnet.patch |   39 -
>  ...sallow-XDP-program-on-hardware-buffe.patch |   53 -
>  ...DP-support-if-sw-bm-is-used-as-fallb.patch |   67 -
>  ...in-link-immediately-after-enabling-t.patch |   60 -
>  ...7-PCI-aardvark-Improve-link-training.patch |  208 ---
>  ...18-PCI-aardvark-Issue-PERST-via-GPIO.patch |  123 --
>  .../019-PCI-aardvark-Add-PHY-support.patch    |  152 --
>  ...l-armada-37xx-Set-pcie_reset_pin-to-.patch |   93 --
>  ...l-armada-37xx-Move-PCIe-comphy-handl.patch |   57 -
>  ...l-armada-37xx-Move-PCIe-max-link-spe.patch |   44 -
>  ...-arm64-dts-add-uDPU-i2c-bus-recovery.patch |   53 -
>  ...-t-touch-PCIe-registers-if-no-card-c.patch |   50 -
>  ...add-driver-for-LinkStation-power-off.patch |  207 ---
>  ...-initialization-with-old-Marvell-s-A.patch |   44 -
>  ...l-espressobin-Add-ethernet-switch-al.patch |   88 --
>  ...s-mcbin-singleshot-add-heartbeat-LED.patch |   65 -
>  ...is-omnia-enable-HW-buffer-management.patch |   74 -
>  ...rris-omnia-add-comphy-handle-to-eth2.patch |   37 -
>  ...rris-omnia-describe-switch-interrupt.patch |   61 -
>  ...32-ARM-dts-turris-omnia-add-SFP-node.patch |   90 --
>  ...te-ethernet-phy-node-and-handle-name.patch |   52 -
>  ...omnia-fix-hardware-buffer-management.patch |   33 -
>  ...Mangle-bootloader-s-kernel-arguments.patch |  208 ---
>  ...-mvebu-armada-38x-enable-libata-leds.patch |   10 -
>  .../patches-5.4/302-add_powertables.patch     |  770 ----------
>  ...3-linksys_hardcode_nand_ecc_settings.patch |   17 -
>  .../patches-5.4/304-revert_i2c_delay.patch    |   15 -
>  .../305-armada-385-rd-mtd-partitions.patch    |   19 -
>  .../306-ARM-mvebu-385-ap-Add-partitions.patch |   35 -
>  ...-armada-xp-linksys-mamba-broken-idle.patch |   10 -
>  .../308-armada-xp-linksys-mamba-wan.patch     |   11 -
>  .../patches-5.4/309-linksys-status-led.patch  |   50 -
>  .../310-linksys-use-eth0-as-cpu-port.patch    |   25 -
>  .../311-adjust-compatible-for-linksys.patch   |   68 -
>  ...da388-clearfog-emmc-on-clearfog-base.patch |   87 --
>  .../312-helios4-dts-status-led-alias.patch    |   25 -
>  ...ts-marvell-armada37xx-Add-eth0-alias.patch |   20 -
>  ...l-armada-3720-espressobin-add-ports-.patch |   26 -
>  ...witch-PHY-operation-mode-to-2500base.patch |   34 -
>  ...rmada-xp-linksys-mamba-resize-kernel.patch |   37 -
>  ...320-armada-370-dts-fix-crypto-engine.patch |   29 -
>  .../patches-5.4/400-find_active_root.patch    |   60 -
>  .../700-mvneta-tx-queue-workaround.patch      |   38 -
>  ...dicate-failure-to-enter-deeper-sleep.patch |   40 -
>  ...-pci-mvebu-time-out-reset-on-link-up.patch |   60 -
>  73 files changed, 8546 deletions(-)
>  delete mode 100644 target/linux/mvebu/config-5.4
>  delete mode 100644 target/linux/mvebu/cortexa53/config-5.4
>  delete mode 100644 target/linux/mvebu/cortexa72/config-5.4
>  delete mode 100644 target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
>  delete mode 100644 target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
>  delete mode 100644 target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
>  delete mode 100644 target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-
> marvell-Add-support-for-Marvell-CN9130-SoC.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/001-PCI-aardvark-
> Wait-for-endpoint-to-be-ready-before-tr.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-
> marvell-Add-support-for-CP115.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-
> marvell-Prepare-the-introduction-of-CP115.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/003-net-mvneta-
> introduce-mvneta_update_stats-routine.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-
> marvell-Add-support-for-AP807-AP807-quad.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/004-net-mvneta-
> introduce-page-pool-API-for-sw-buffer-man.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-
> marvell-Add-AP807-quad-cache-description.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/005-net-mvneta-rely-
> on-build_skb-in-mvneta_rx_swbm-poll-.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-
> marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/006-net-mvneta-add-
> basic-XDP-support.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-
> marvell-Externalize-PCIe-macros-from-CP11x.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/007-gpio-mvebu-
> avoid_error_message_for_optional_IRQ.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/007-net-mvneta-
> move-header-prefetch-in-mvneta_swbm_rx_fr.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-
> marvell-Enumerate-the-first-AP806-syscon.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/008-net-mvneta-
> make-tx-buffer-array-agnostic.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-
> marvell-Prepare-the-introduction-of-AP807-.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/009-net-mvneta-add-
> XDP_TX-support.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-
> marvell-Move-clocks-to-AP806-specific-file.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/010-net-mvneta-fix-
> build-skb-for-bm-capable-devices.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-
> remove-i2c-fast-mode.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-
> SFP-cages-support-3W-modules.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/013-net-mvneta-rely-
> on-page_pool_recycle_direct-in-mvnet.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/014-mvneta-driver-
> disallow-XDP-program-on-hardware-buffe.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/015-net-mvneta-fix-
> XDP-support-if-sw-bm-is-used-as-fallb.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/016-PCI-aardvark-
> Train-link-immediately-after-enabling-t.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/017-PCI-aardvark-
> Improve-link-training.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/018-PCI-aardvark-
> Issue-PERST-via-GPIO.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/019-PCI-aardvark-
> Add-PHY-support.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/020-arm64-dts-
> marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/021-arm64-dts-
> marvell-armada-37xx-Move-PCIe-comphy-handl.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/022-arm64-dts-
> marvell-armada-37xx-Move-PCIe-max-link-spe.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/023-arm64-dts-add-
> uDPU-i2c-bus-recovery.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/024-PCI-aardvark-
> Don-t-touch-PCIe-registers-if-no-card-c.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/025-power-reset-add-
> driver-for-LinkStation-power-off.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-
> initialization-with-old-Marvell-s-A.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/027-arm64-dts-
> marvell-espressobin-Add-ethernet-switch-al.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-
> singleshot-add-heartbeat-LED.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/029-ARM-dts-turris-
> omnia-enable-HW-buffer-management.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/030-ARM-dts-turris-
> omnia-add-comphy-handle-to-eth2.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/031-ARM-dts-turris-
> omnia-describe-switch-interrupt.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/032-ARM-dts-turris-
> omnia-add-SFP-node.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/033-ARM-dts-turris-
> omnia-update-ethernet-phy-node-and-handle-name.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/034-ARM-dts-turris-
> omnia-fix-hardware-buffer-management.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/300-mvebu-Mangle-
> bootloader-s-kernel-arguments.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/301-mvebu-armada-
> 38x-enable-libata-leds.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/302-
> add_powertables.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/303-
> linksys_hardcode_nand_ecc_settings.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/304-
> revert_i2c_delay.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/305-armada-385-rd-
> mtd-partitions.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-
> ap-Add-partitions.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/307-armada-xp-
> linksys-mamba-broken-idle.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/308-armada-xp-
> linksys-mamba-wan.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/309-linksys-status-
> led.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/310-linksys-use-eth0-
> as-cpu-port.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/311-adjust-
> compatible-for-linksys.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/312-ARM-dts-
> armada388-clearfog-emmc-on-clearfog-base.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/312-helios4-dts-
> status-led-alias.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/314-arm64-dts-
> marvell-armada37xx-Add-eth0-alias.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/315-arm64-dts-
> marvell-armada-3720-espressobin-add-ports-.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-
> switch-PHY-operation-mode-to-2500base.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/318-armada-xp-
> linksys-mamba-resize-kernel.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/320-armada-370-dts-
> fix-crypto-engine.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/400-
> find_active_root.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/700-mvneta-tx-
> queue-workaround.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-
> indicate-failure-to-enter-deeper-sleep.patch
>  delete mode 100644 target/linux/mvebu/patches-5.4/801-pci-mvebu-time-
> out-reset-on-link-up.patch
> 
> diff --git a/target/linux/mvebu/config-5.4 b/target/linux/mvebu/config-5.4
> deleted file mode 100644
> index 3ee595c728..0000000000
> --- a/target/linux/mvebu/config-5.4
> +++ /dev/null
> @@ -1,421 +0,0 @@
> -CONFIG_AHCI_MVEBU=y
> -CONFIG_ALIGNMENT_TRAP=y
> -CONFIG_ARCH_32BIT_OFF_T=y
> -CONFIG_ARCH_CLOCKSOURCE_DATA=y
> -CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> -CONFIG_ARCH_KEEP_MEMBLOCK=y
> -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> -CONFIG_ARCH_MULTIPLATFORM=y
> -CONFIG_ARCH_MULTI_V6_V7=y
> -CONFIG_ARCH_MULTI_V7=y
> -CONFIG_ARCH_MVEBU=y
> -CONFIG_ARCH_NR_GPIO=0
> -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
> -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
> -CONFIG_ARCH_SUSPEND_POSSIBLE=y
> -CONFIG_ARM=y
> -CONFIG_ARMADA_370_CLK=y
> -CONFIG_ARMADA_370_XP_IRQ=y
> -CONFIG_ARMADA_370_XP_TIMER=y
> -# CONFIG_ARMADA_37XX_WATCHDOG is not set
> -CONFIG_ARMADA_38X_CLK=y
> -CONFIG_ARMADA_THERMAL=y
> -CONFIG_ARMADA_XP_CLK=y
> -CONFIG_ARM_APPENDED_DTB=y
> -# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
> -# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
> -CONFIG_ARM_ATAG_DTB_COMPAT=y
> -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is
> not set
> -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
> -CONFIG_ARM_CPU_SUSPEND=y
> -CONFIG_ARM_CRYPTO=y
> -CONFIG_ARM_ERRATA_720789=y
> -CONFIG_ARM_ERRATA_764369=y
> -CONFIG_ARM_GIC=y
> -CONFIG_ARM_GLOBAL_TIMER=y
> -CONFIG_ARM_HAS_SG_CHAIN=y
> -CONFIG_ARM_HEAVY_MB=y
> -CONFIG_ARM_L1_CACHE_SHIFT=6
> -CONFIG_ARM_L1_CACHE_SHIFT_6=y
> -CONFIG_ARM_MVEBU_V7_CPUIDLE=y
> -CONFIG_ARM_PATCH_IDIV=y
> -CONFIG_ARM_PATCH_PHYS_VIRT=y
> -CONFIG_ARM_THUMB=y
> -CONFIG_ARM_UNWIND=y
> -CONFIG_ARM_VIRT_EXT=y
> -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
> -CONFIG_ATA=y
> -CONFIG_ATAGS=y
> -CONFIG_ATA_LEDS=y
> -CONFIG_AUTO_ZRELADDR=y
> -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
> -CONFIG_BLK_DEV_LOOP=y
> -CONFIG_BLK_DEV_SD=y
> -CONFIG_BLK_MQ_PCI=y
> -CONFIG_BLK_SCSI_REQUEST=y
> -CONFIG_BOUNCE=y
> -# CONFIG_CACHE_FEROCEON_L2 is not set
> -CONFIG_CACHE_L2X0=y
> -CONFIG_CLKDEV_LOOKUP=y
> -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
> -CONFIG_CLKSRC_MMIO=y
> -CONFIG_CLONE_BACKWARDS=y
> -CONFIG_COMMON_CLK=y
> -CONFIG_COMPAT_32BIT_TIME=y
> -CONFIG_CPUFREQ_DT=y
> -CONFIG_CPUFREQ_DT_PLATDEV=y
> -CONFIG_CPU_32v6K=y
> -CONFIG_CPU_32v7=y
> -CONFIG_CPU_ABRT_EV7=y
> -CONFIG_CPU_CACHE_V7=y
> -CONFIG_CPU_CACHE_VIPT=y
> -CONFIG_CPU_COPY_V6=y
> -CONFIG_CPU_CP15=y
> -CONFIG_CPU_CP15_MMU=y
> -CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> -CONFIG_CPU_FREQ_GOV_ATTR_SET=y
> -CONFIG_CPU_FREQ_GOV_COMMON=y
> -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
> -CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
> -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
> -CONFIG_CPU_FREQ_STAT=y
> -CONFIG_CPU_HAS_ASID=y
> -CONFIG_CPU_IDLE=y
> -CONFIG_CPU_IDLE_GOV_LADDER=y
> -CONFIG_CPU_PABRT_V7=y
> -CONFIG_CPU_PJ4B=y
> -CONFIG_CPU_PM=y
> -CONFIG_CPU_RMAP=y
> -CONFIG_CPU_SPECTRE=y
> -CONFIG_CPU_THERMAL=y
> -CONFIG_CPU_THUMB_CAPABLE=y
> -CONFIG_CPU_TLB_V7=y
> -CONFIG_CPU_V7=y
> -CONFIG_CRC16=y
> -CONFIG_CRYPTO_ACOMP2=y
> -CONFIG_CRYPTO_AEAD=y
> -CONFIG_CRYPTO_AEAD2=y
> -CONFIG_CRYPTO_AES_ARM=y
> -CONFIG_CRYPTO_AES_ARM_BS=y
> -CONFIG_CRYPTO_AUTHENC=y
> -CONFIG_CRYPTO_CRC32=y
> -CONFIG_CRYPTO_CRC32C=y
> -CONFIG_CRYPTO_CRYPTD=y
> -CONFIG_CRYPTO_DEFLATE=y
> -CONFIG_CRYPTO_DES=y
> -CONFIG_CRYPTO_DEV_MARVELL_CESA=y
> -CONFIG_CRYPTO_ESSIV=y
> -CONFIG_CRYPTO_HASH=y
> -CONFIG_CRYPTO_HASH2=y
> -CONFIG_CRYPTO_HASH_INFO=y
> -CONFIG_CRYPTO_HW=y
> -CONFIG_CRYPTO_LIB_DES=y
> -CONFIG_CRYPTO_LZO=y
> -CONFIG_CRYPTO_MANAGER=y
> -CONFIG_CRYPTO_MANAGER2=y
> -CONFIG_CRYPTO_NULL=y
> -CONFIG_CRYPTO_NULL2=y
> -CONFIG_CRYPTO_RNG2=y
> -CONFIG_CRYPTO_SHA1=y
> -CONFIG_CRYPTO_SHA1_ARM=y
> -CONFIG_CRYPTO_SHA1_ARM_NEON=y
> -CONFIG_CRYPTO_SHA256_ARM=y
> -CONFIG_CRYPTO_SHA512_ARM=y
> -CONFIG_CRYPTO_SIMD=y
> -CONFIG_DCACHE_WORD_ACCESS=y
> -CONFIG_DEBUG_ALIGN_RODATA=y
> -CONFIG_DEBUG_INFO=y
> -CONFIG_DEBUG_LL=y
> -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
> -CONFIG_DEBUG_MVEBU_UART0=y
> -# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
> -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
> -CONFIG_DEBUG_UART_8250=y
> -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
> -CONFIG_DEBUG_UART_8250_SHIFT=2
> -# CONFIG_DEBUG_UART_8250_WORD is not set
> -CONFIG_DEBUG_UART_PHYS=0xd0012000
> -CONFIG_DEBUG_UART_VIRT=0xfec12000
> -CONFIG_DEBUG_UNCOMPRESS=y
> -CONFIG_DEBUG_USER=y
> -CONFIG_DMADEVICES=y
> -CONFIG_DMA_ENGINE=y
> -CONFIG_DMA_ENGINE_RAID=y
> -CONFIG_DMA_OF=y
> -CONFIG_DMA_REMAP=y
> -CONFIG_DTC=y
> -CONFIG_EARLY_PRINTK=y
> -CONFIG_EDAC_ATOMIC_SCRUB=y
> -CONFIG_EDAC_SUPPORT=y
> -CONFIG_EXT4_FS=y
> -CONFIG_EXTCON=y
> -CONFIG_F2FS_FS=y
> -CONFIG_FIXED_PHY=y
> -CONFIG_FIX_EARLYCON_MEM=y
> -CONFIG_FS_IOMAP=y
> -CONFIG_FS_MBCACHE=y
> -CONFIG_FW_LOADER_PAGED_BUF=y
> -CONFIG_GENERIC_ALLOCATOR=y
> -CONFIG_GENERIC_ARCH_TOPOLOGY=y
> -CONFIG_GENERIC_BUG=y
> -CONFIG_GENERIC_CLOCKEVENTS=y
> -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> -CONFIG_GENERIC_CPU_AUTOPROBE=y
> -CONFIG_GENERIC_EARLY_IOREMAP=y
> -CONFIG_GENERIC_IDLE_POLL_SETUP=y
> -CONFIG_GENERIC_IRQ_CHIP=y
> -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
> -CONFIG_GENERIC_IRQ_MIGRATION=y
> -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
> -CONFIG_GENERIC_IRQ_SHOW=y
> -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
> -CONFIG_GENERIC_MSI_IRQ=y
> -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
> -CONFIG_GENERIC_PCI_IOMAP=y
> -CONFIG_GENERIC_PHY=y
> -CONFIG_GENERIC_SCHED_CLOCK=y
> -CONFIG_GENERIC_SMP_IDLE_THREAD=y
> -CONFIG_GENERIC_STRNCPY_FROM_USER=y
> -CONFIG_GENERIC_STRNLEN_USER=y
> -CONFIG_GENERIC_TIME_VSYSCALL=y
> -CONFIG_GLOB=y
> -CONFIG_GPIOLIB=y
> -CONFIG_GPIOLIB_IRQCHIP=y
> -CONFIG_GPIO_GENERIC=y
> -CONFIG_GPIO_GENERIC_PLATFORM=y
> -CONFIG_GPIO_MVEBU=y
> -CONFIG_GPIO_PCA953X=y
> -CONFIG_GPIO_PCA953X_IRQ=y
> -CONFIG_GRO_CELLS=y
> -CONFIG_HANDLE_DOMAIN_IRQ=y
> -CONFIG_HARDEN_BRANCH_PREDICTOR=y
> -CONFIG_HARDIRQS_SW_RESEND=y
> -CONFIG_HAS_DMA=y
> -CONFIG_HAS_IOMEM=y
> -CONFIG_HAS_IOPORT_MAP=y
> -CONFIG_HAVE_SMP=y
> -CONFIG_HIGHMEM=y
> -# CONFIG_HIGHPTE is not set
> -CONFIG_HOTPLUG_CPU=y
> -CONFIG_HWBM=y
> -CONFIG_HWMON=y
> -CONFIG_HW_RANDOM=y
> -CONFIG_HZ_FIXED=0
> -CONFIG_HZ_PERIODIC=y
> -CONFIG_I2C=y
> -CONFIG_I2C_BOARDINFO=y
> -CONFIG_I2C_CHARDEV=y
> -CONFIG_I2C_MV64XXX=y
> -# CONFIG_I2C_PXA is not set
> -CONFIG_INITRAMFS_SOURCE=""
> -CONFIG_IRQCHIP=y
> -CONFIG_IRQ_DOMAIN=y
> -CONFIG_IRQ_DOMAIN_HIERARCHY=y
> -CONFIG_IRQ_FORCED_THREADING=y
> -CONFIG_IRQ_WORK=y
> -# CONFIG_IWMMXT is not set
> -CONFIG_JBD2=y
> -CONFIG_LEDS_GPIO=y
> -CONFIG_LEDS_PCA963X=y
> -CONFIG_LEDS_TLC591XX=y
> -CONFIG_LEDS_TRIGGER_DISK=y
> -CONFIG_LIBFDT=y
> -CONFIG_LOCK_DEBUGGING_SUPPORT=y
> -CONFIG_LOCK_SPIN_ON_OWNER=y
> -CONFIG_LZO_COMPRESS=y
> -CONFIG_LZO_DECOMPRESS=y
> -CONFIG_MACH_ARMADA_370=y
> -# CONFIG_MACH_ARMADA_375 is not set
> -CONFIG_MACH_ARMADA_38X=y
> -# CONFIG_MACH_ARMADA_39X is not set
> -CONFIG_MACH_ARMADA_XP=y
> -# CONFIG_MACH_DOVE is not set
> -CONFIG_MACH_MVEBU_ANY=y
> -CONFIG_MACH_MVEBU_V7=y
> -CONFIG_MAGIC_SYSRQ=y
> -CONFIG_MANGLE_BOOTARGS=y
> -CONFIG_MARVELL_PHY=y
> -CONFIG_MDIO_BUS=y
> -CONFIG_MDIO_DEVICE=y
> -CONFIG_MDIO_I2C=y
> -CONFIG_MEMFD_CREATE=y
> -CONFIG_MEMORY=y
> -CONFIG_MIGHT_HAVE_CACHE_L2X0=y
> -CONFIG_MIGRATION=y
> -CONFIG_MMC=y
> -CONFIG_MMC_BLOCK=y
> -CONFIG_MMC_MVSDIO=y
> -CONFIG_MMC_SDHCI=y
> -# CONFIG_MMC_SDHCI_PCI is not set
> -CONFIG_MMC_SDHCI_PLTFM=y
> -CONFIG_MMC_SDHCI_PXAV3=y
> -CONFIG_MODULES_USE_ELF_REL=y
> -CONFIG_MTD_CFI_STAA=y
> -CONFIG_MTD_NAND_CORE=y
> -CONFIG_MTD_NAND_ECC_SW_HAMMING=y
> -CONFIG_MTD_NAND_MARVELL=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_MTD_SPI_NOR=y
> -CONFIG_MTD_SPLIT_FIRMWARE=y
> -CONFIG_MTD_UBI=y
> -CONFIG_MTD_UBI_BEB_LIMIT=20
> -CONFIG_MTD_UBI_BLOCK=y
> -CONFIG_MTD_UBI_WL_THRESHOLD=4096
> -CONFIG_MUTEX_SPIN_ON_OWNER=y
> -CONFIG_MVEBU_CLK_COMMON=y
> -CONFIG_MVEBU_CLK_COREDIV=y
> -CONFIG_MVEBU_CLK_CPU=y
> -CONFIG_MVEBU_DEVBUS=y
> -CONFIG_MVEBU_MBUS=y
> -CONFIG_MVMDIO=y
> -CONFIG_MVNETA=y
> -CONFIG_MVNETA_BM=y
> -CONFIG_MVNETA_BM_ENABLE=y
> -# CONFIG_MVPP2 is not set
> -CONFIG_MV_XOR=y
> -CONFIG_NEED_DMA_MAP_STATE=y
> -CONFIG_NEON=y
> -CONFIG_NET_DEVLINK=y
> -CONFIG_NET_DSA=y
> -CONFIG_NET_DSA_MV88E6XXX=y
> -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
> -CONFIG_NET_DSA_TAG_DSA=y
> -CONFIG_NET_DSA_TAG_EDSA=y
> -CONFIG_NET_FLOW_LIMIT=y
> -CONFIG_NET_SWITCHDEV=y
> -CONFIG_NLS=y
> -CONFIG_NOP_USB_XCEIV=y
> -CONFIG_NR_CPUS=4
> -CONFIG_NVMEM=y
> -CONFIG_OF=y
> -CONFIG_OF_ADDRESS=y
> -CONFIG_OF_EARLY_FLATTREE=y
> -CONFIG_OF_FLATTREE=y
> -CONFIG_OF_GPIO=y
> -CONFIG_OF_IRQ=y
> -CONFIG_OF_KOBJ=y
> -CONFIG_OF_MDIO=y
> -CONFIG_OF_NET=y
> -CONFIG_OLD_SIGACTION=y
> -CONFIG_OLD_SIGSUSPEND3=y
> -CONFIG_ORION_WATCHDOG=y
> -CONFIG_OUTER_CACHE=y
> -CONFIG_OUTER_CACHE_SYNC=y
> -CONFIG_PADATA=y
> -CONFIG_PAGE_OFFSET=0xC0000000
> -CONFIG_PAGE_POOL=y
> -CONFIG_PCI=y
> -CONFIG_PCI_BRIDGE_EMUL=y
> -CONFIG_PCI_DOMAINS=y
> -CONFIG_PCI_DOMAINS_GENERIC=y
> -CONFIG_PCI_MSI=y
> -CONFIG_PCI_MSI_IRQ_DOMAIN=y
> -CONFIG_PCI_MVEBU=y
> -CONFIG_PERF_USE_VMALLOC=y
> -CONFIG_PGTABLE_LEVELS=2
> -CONFIG_PHYLIB=y
> -CONFIG_PHYLINK=y
> -# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
> -# CONFIG_PHY_MVEBU_A3700_UTMI is not set
> -CONFIG_PHY_MVEBU_A38X_COMPHY=y
> -# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
> -CONFIG_PINCTRL=y
> -CONFIG_PINCTRL_ARMADA_370=y
> -CONFIG_PINCTRL_ARMADA_38X=y
> -CONFIG_PINCTRL_ARMADA_XP=y
> -CONFIG_PINCTRL_MVEBU=y
> -# CONFIG_PINCTRL_SINGLE is not set
> -CONFIG_PJ4B_ERRATA_4742=y
> -CONFIG_PL310_ERRATA_753970=y
> -CONFIG_PLAT_ORION=y
> -CONFIG_PM_OPP=y
> -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
> -CONFIG_PWM=y
> -CONFIG_PWM_SYSFS=y
> -CONFIG_RATIONAL=y
> -CONFIG_REFCOUNT_FULL=y
> -CONFIG_REGMAP=y
> -CONFIG_REGMAP_I2C=y
> -CONFIG_REGMAP_MMIO=y
> -CONFIG_REGULATOR=y
> -CONFIG_REGULATOR_FIXED_VOLTAGE=y
> -CONFIG_RFS_ACCEL=y
> -CONFIG_RPS=y
> -CONFIG_RTC_CLASS=y
> -CONFIG_RTC_DRV_ARMADA38X=y
> -CONFIG_RTC_DRV_MV=y
> -CONFIG_RTC_I2C_AND_SPI=y
> -CONFIG_RTC_MC146818_LIB=y
> -CONFIG_RWSEM_SPIN_ON_OWNER=y
> -CONFIG_SATA_AHCI_PLATFORM=y
> -CONFIG_SATA_MV=y
> -CONFIG_SATA_PMP=y
> -CONFIG_SCSI=y
> -# CONFIG_SENSORS_DRIVETEMP is not set
> -CONFIG_SENSORS_PWM_FAN=y
> -CONFIG_SENSORS_TMP421=y
> -CONFIG_SERIAL_8250_DW=y
> -CONFIG_SERIAL_8250_DWLIB=y
> -CONFIG_SERIAL_8250_FSL=y
> -CONFIG_SERIAL_MCTRL_GPIO=y
> -CONFIG_SERIAL_MVEBU_CONSOLE=y
> -CONFIG_SERIAL_MVEBU_UART=y
> -CONFIG_SFP=y
> -CONFIG_SGL_ALLOC=y
> -CONFIG_SG_POOL=y
> -CONFIG_SMP=y
> -CONFIG_SMP_ON_UP=y
> -CONFIG_SOC_BUS=y
> -CONFIG_SPARSE_IRQ=y
> -CONFIG_SPI=y
> -# CONFIG_SPI_ARMADA_3700 is not set
> -CONFIG_SPI_MASTER=y
> -CONFIG_SPI_MEM=y
> -CONFIG_SPI_ORION=y
> -CONFIG_SRAM=y
> -CONFIG_SRAM_EXEC=y
> -CONFIG_SRCU=y
> -CONFIG_SWPHY=y
> -CONFIG_SWP_EMULATE=y
> -CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> -CONFIG_THERMAL=y
> -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
> -CONFIG_THERMAL_GOV_STEP_WISE=y
> -CONFIG_THERMAL_HWMON=y
> -CONFIG_THERMAL_OF=y
> -CONFIG_TICK_CPU_ACCOUNTING=y
> -CONFIG_TIMER_OF=y
> -CONFIG_TIMER_PROBE=y
> -CONFIG_TREE_RCU=y
> -CONFIG_TREE_SRCU=y
> -CONFIG_UBIFS_FS=y
> -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
> -CONFIG_UNWINDER_ARM=y
> -CONFIG_USB=y
> -CONFIG_USB_COMMON=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_EHCI_HCD_ORION=y
> -CONFIG_USB_EHCI_HCD_PLATFORM=y
> -CONFIG_USB_LEDS_TRIGGER_USBPORT=y
> -CONFIG_USB_PHY=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_USB_SUPPORT=y
> -CONFIG_USB_XHCI_HCD=y
> -CONFIG_USB_XHCI_MVEBU=y
> -CONFIG_USB_XHCI_PLATFORM=y
> -CONFIG_USE_OF=y
> -CONFIG_VFP=y
> -CONFIG_VFPv3=y
> -CONFIG_WATCHDOG_CORE=y
> -CONFIG_XPS=y
> -CONFIG_XZ_DEC_ARM=y
> -CONFIG_XZ_DEC_BCJ=y
> -CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_ZBOOT_ROM_TEXT=0x0
> -CONFIG_ZLIB_DEFLATE=y
> -CONFIG_ZLIB_INFLATE=y
> diff --git a/target/linux/mvebu/cortexa53/config-5.4
> b/target/linux/mvebu/cortexa53/config-5.4
> deleted file mode 100644
> index b88de78ee4..0000000000
> --- a/target/linux/mvebu/cortexa53/config-5.4
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -CONFIG_64BIT=y
> -CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> -CONFIG_ARCH_MMAP_RND_BITS=18
> -CONFIG_ARCH_MMAP_RND_BITS_MAX=24
> -CONFIG_ARCH_MMAP_RND_BITS_MIN=18
> -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
> -CONFIG_ARCH_PROC_KCORE_TEXT=y
> -CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> -CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> -CONFIG_ARCH_SPARSEMEM_ENABLE=y
> -CONFIG_ARM64=y
> -CONFIG_ARM64_4K_PAGES=y
> -CONFIG_ARM64_CONT_SHIFT=4
> -# CONFIG_ARM64_ERRATUM_1165522 is not set
> -# CONFIG_ARM64_ERRATUM_1286807 is not set
> -CONFIG_ARM64_PAGE_SHIFT=12
> -CONFIG_ARM64_PA_BITS=48
> -CONFIG_ARM64_PA_BITS_48=y
> -CONFIG_ARM64_PTR_AUTH=y
> -CONFIG_ARM64_SSBD=y
> -CONFIG_ARM64_SVE=y
> -CONFIG_ARM64_TAGGED_ADDR_ABI=y
> -CONFIG_ARM64_VA_BITS=39
> -CONFIG_ARM64_VA_BITS_39=y
> -CONFIG_ARMADA_37XX_CLK=y
> -CONFIG_ARMADA_AP806_SYSCON=y
> -CONFIG_ARMADA_AP_CP_HELPER=y
> -CONFIG_ARMADA_CP110_SYSCON=y
> -CONFIG_ARM_AMBA=y
> -CONFIG_ARM_ARCH_TIMER=y
> -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
> -CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
> -CONFIG_ARM_GIC_V2M=y
> -CONFIG_ARM_GIC_V3=y
> -CONFIG_ARM_GIC_V3_ITS=y
> -CONFIG_ARM_GIC_V3_ITS_PCI=y
> -# CONFIG_ARM_PL172_MPMC is not set
> -CONFIG_ARM_PSCI_FW=y
> -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
> -# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
> -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
> -# CONFIG_DEBUG_ALIGN_RODATA is not set
> -CONFIG_DMA_DIRECT_REMAP=y
> -CONFIG_DRM_RCAR_WRITEBACK=y
> -# CONFIG_FLATMEM_MANUAL is not set
> -CONFIG_FRAME_POINTER=y
> -# CONFIG_FUJITSU_ERRATUM_010001 is not set
> -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> -CONFIG_GENERIC_CPU_VULNERABILITIES=y
> -CONFIG_GENERIC_CSUM=y
> -CONFIG_GENERIC_GETTIMEOFDAY=y
> -CONFIG_GENERIC_PINCONF=y
> -CONFIG_HOLES_IN_ZONE=y
> -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> -CONFIG_MFD_SYSCON=y
> -CONFIG_MMC_SDHCI_XENON=y
> -CONFIG_MODULES_USE_ELF_RELA=y
> -CONFIG_MVEBU_GICP=y
> -CONFIG_MVEBU_ICU=y
> -CONFIG_MVEBU_ODMI=y
> -CONFIG_MVEBU_PIC=y
> -CONFIG_MVEBU_SEI=y
> -CONFIG_NEED_SG_DMA_LENGTH=y
> -CONFIG_PARTITION_PERCPU=y
> -CONFIG_PCI_AARDVARK=y
> -CONFIG_PGTABLE_LEVELS=3
> -CONFIG_PHYS_ADDR_T_64BIT=y
> -CONFIG_PHY_MVEBU_A3700_COMPHY=y
> -CONFIG_PHY_MVEBU_A3700_UTMI=y
> -CONFIG_PINCTRL_ARMADA_37XX=y
> -CONFIG_PINCTRL_ARMADA_AP806=y
> -CONFIG_PINCTRL_ARMADA_CP110=y
> -CONFIG_POWER_RESET=y
> -# CONFIG_POWER_RESET_LINKSTATION is not set
> -CONFIG_POWER_SUPPLY=y
> -CONFIG_QUEUED_RWLOCKS=y
> -CONFIG_QUEUED_SPINLOCKS=y
> -CONFIG_REGULATOR_GPIO=y
> -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
> -CONFIG_SPARSEMEM=y
> -CONFIG_SPARSEMEM_EXTREME=y
> -CONFIG_SPARSEMEM_MANUAL=y
> -CONFIG_SPARSEMEM_VMEMMAP=y
> -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> -CONFIG_SPI_ARMADA_3700=y
> -CONFIG_SWIOTLB=y
> -CONFIG_SYSCTL_EXCEPTION_TRACE=y
> -CONFIG_SYS_SUPPORTS_HUGETLBFS=y
> -CONFIG_THREAD_INFO_IN_TASK=y
> -CONFIG_UNMAP_KERNEL_AT_EL0=y
> -CONFIG_VMAP_STACK=y
> -CONFIG_ZONE_DMA32=y
> diff --git a/target/linux/mvebu/cortexa72/config-5.4
> b/target/linux/mvebu/cortexa72/config-5.4
> deleted file mode 100644
> index 12b2ea399c..0000000000
> --- a/target/linux/mvebu/cortexa72/config-5.4
> +++ /dev/null
> @@ -1,99 +0,0 @@
> -CONFIG_64BIT=y
> -CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> -CONFIG_ARCH_MMAP_RND_BITS=18
> -CONFIG_ARCH_MMAP_RND_BITS_MAX=24
> -CONFIG_ARCH_MMAP_RND_BITS_MIN=18
> -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
> -CONFIG_ARCH_PROC_KCORE_TEXT=y
> -CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> -CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> -CONFIG_ARCH_SPARSEMEM_ENABLE=y
> -CONFIG_ARM64=y
> -CONFIG_ARM64_4K_PAGES=y
> -CONFIG_ARM64_CONT_SHIFT=4
> -# CONFIG_ARM64_ERRATUM_1165522 is not set
> -# CONFIG_ARM64_ERRATUM_1286807 is not set
> -CONFIG_ARM64_PAGE_SHIFT=12
> -CONFIG_ARM64_PA_BITS=48
> -CONFIG_ARM64_PA_BITS_48=y
> -# CONFIG_ARM64_PTR_AUTH is not set
> -CONFIG_ARM64_SSBD=y
> -CONFIG_ARM64_SVE=y
> -# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
> -CONFIG_ARM64_VA_BITS=39
> -CONFIG_ARM64_VA_BITS_39=y
> -CONFIG_ARMADA_37XX_CLK=y
> -CONFIG_ARMADA_AP806_SYSCON=y
> -CONFIG_ARMADA_AP_CP_HELPER=y
> -CONFIG_ARMADA_CP110_SYSCON=y
> -CONFIG_ARM_AMBA=y
> -CONFIG_ARM_ARCH_TIMER=y
> -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
> -CONFIG_ARM_GIC_V2M=y
> -CONFIG_ARM_GIC_V3=y
> -CONFIG_ARM_GIC_V3_ITS=y
> -CONFIG_ARM_GIC_V3_ITS_PCI=y
> -# CONFIG_ARM_PL172_MPMC is not set
> -CONFIG_ARM_PSCI_FW=y
> -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
> -# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
> -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
> -# CONFIG_DEBUG_ALIGN_RODATA is not set
> -CONFIG_DMA_DIRECT_REMAP=y
> -CONFIG_DRM_RCAR_WRITEBACK=y
> -# CONFIG_FLATMEM_MANUAL is not set
> -CONFIG_FRAME_POINTER=y
> -# CONFIG_FUJITSU_ERRATUM_010001 is not set
> -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> -CONFIG_GENERIC_CPU_VULNERABILITIES=y
> -CONFIG_GENERIC_CSUM=y
> -CONFIG_GENERIC_GETTIMEOFDAY=y
> -CONFIG_GENERIC_PINCONF=y
> -CONFIG_HOLES_IN_ZONE=y
> -CONFIG_HW_RANDOM_OMAP=y
> -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> -CONFIG_MARVELL_10G_PHY=y
> -CONFIG_MFD_SYSCON=y
> -CONFIG_MMC_SDHCI_XENON=y
> -CONFIG_MODULES_USE_ELF_RELA=y
> -CONFIG_MVEBU_GICP=y
> -CONFIG_MVEBU_ICU=y
> -CONFIG_MVEBU_ODMI=y
> -CONFIG_MVEBU_PIC=y
> -CONFIG_MVEBU_SEI=y
> -CONFIG_MVPP2=y
> -CONFIG_MV_XOR_V2=y
> -CONFIG_NEED_SG_DMA_LENGTH=y
> -CONFIG_PARTITION_PERCPU=y
> -CONFIG_PCIEAER=y
> -CONFIG_PCIEPORTBUS=y
> -CONFIG_PCIE_ARMADA_8K=y
> -CONFIG_PCIE_DW=y
> -CONFIG_PCIE_DW_HOST=y
> -# CONFIG_PCI_AARDVARK is not set
> -CONFIG_PGTABLE_LEVELS=3
> -CONFIG_PHYS_ADDR_T_64BIT=y
> -CONFIG_PHY_MVEBU_CP110_COMPHY=y
> -CONFIG_PINCTRL_ARMADA_37XX=y
> -CONFIG_PINCTRL_ARMADA_AP806=y
> -CONFIG_PINCTRL_ARMADA_CP110=y
> -CONFIG_POWER_RESET=y
> -# CONFIG_POWER_RESET_LINKSTATION is not set
> -CONFIG_POWER_SUPPLY=y
> -CONFIG_QUEUED_RWLOCKS=y
> -CONFIG_QUEUED_SPINLOCKS=y
> -CONFIG_RAS=y
> -CONFIG_REGULATOR_GPIO=y
> -# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
> -CONFIG_SPARSEMEM=y
> -CONFIG_SPARSEMEM_EXTREME=y
> -CONFIG_SPARSEMEM_MANUAL=y
> -CONFIG_SPARSEMEM_VMEMMAP=y
> -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> -CONFIG_SWIOTLB=y
> -CONFIG_SYSCTL_EXCEPTION_TRACE=y
> -CONFIG_SYS_SUPPORTS_HUGETLBFS=y
> -CONFIG_THREAD_INFO_IN_TASK=y
> -CONFIG_UNMAP_KERNEL_AT_EL0=y
> -CONFIG_VMAP_STACK=y
> -CONFIG_ZONE_DMA32=y
> diff --git a/target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-
> espressobin-emmc.dts
> deleted file mode 100644
> index e3bed4d445..0000000000
> --- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-
> 3720-espressobin-emmc.dts
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> -/*
> - * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
> - * Copyright (C) 2018 Marvell
> - *
> - * Romain Perier <romain.perier@free-electrons.com>
> - * Konstantin Porotchkin <kostap@marvell.com>
> - *
> - */
> -
> -#include "armada-3720-espressobin.dts"
> -
> -/ {
> -	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
> -	compatible = "globalscale,espressobin-emmc",
> "globalscale,espressobin",
> -		     "marvell,armada3720", "marvell,armada3710";
> -};
> -
> -&sdhci0 {
> -	status = "okay";
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	mmccard: mmccard@0 {
> -		compatible = "mmc-card";
> -		reg = <0>;
> -	};
> -};
> diff --git a/target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-
> espressobin-v7-emmc.dts
> deleted file mode 100644
> index e1e0071434..0000000000
> --- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-
> 3720-espressobin-v7-emmc.dts
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> -/*
> - * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with
> eMMC
> - * Copyright (C) 2018 Marvell
> - *
> - * Romain Perier <romain.perier@free-electrons.com>
> - * Konstantin Porotchkin <kostap@marvell.com>
> - *
> - */
> -
> -#include "armada-3720-espressobin.dts"
> -
> -/ {
> -	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
> -	compatible = "globalscale,espressobin-v7-emmc",
> "globalscale,espressobin-v7",
> -		     "globalscale,espressobin", "marvell,armada3720",
> -		     "marvell,armada3710";
> -};
> -
> -&ports {
> -	port@1 {
> -		reg = <1>;
> -		label = "lan1";
> -		phy-handle = <&switch0phy0>;
> -	};
> -
> -	port@3 {
> -		reg = <3>;
> -		label = "wan";
> -		phy-handle = <&switch0phy2>;
> -	};
> -};
> -
> -&sdhci0 {
> -	status = "okay";
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	mmccard: mmccard@0 {
> -		compatible = "mmc-card";
> -		reg = <0>;
> -	};
> -};
> diff --git a/target/linux/mvebu/files-
> 5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-
> espressobin-v7.dts
> deleted file mode 100644
> index 40f18409bf..0000000000
> --- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-
> 3720-espressobin-v7.dts
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> -/*
> - * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
> - * Copyright (C) 2018 Marvell
> - *
> - * Romain Perier <romain.perier@free-electrons.com>
> - * Konstantin Porotchkin <kostap@marvell.com>
> - *
> - */
> -
> -#include "armada-3720-espressobin.dts"
> -
> -/ {
> -	model = "Globalscale Marvell ESPRESSOBin Board V7";
> -	compatible = "globalscale,espressobin-v7",
> "globalscale,espressobin",
> -		     "marvell,armada3720", "marvell,armada3710";
> -};
> -
> -&ports {
> -	port@1 {
> -		reg = <1>;
> -		label = "lan1";
> -		phy-handle = <&switch0phy0>;
> -	};
> -
> -	port@3 {
> -		reg = <3>;
> -		label = "wan";
> -		phy-handle = <&switch0phy2>;
> -	};
> -};
> diff --git a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-
> Add-support-for-Marvell-CN9130-SoC.patch b/target/linux/mvebu/patches-
> 5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
> deleted file mode 100644
> index 0f4d14188d..0000000000
> --- a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-
> support-for-Marvell-CN9130-SoC.patch
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:35 +0200
> -Subject: [PATCH] arm64: dts: marvell: Add support for Marvell CN9130 SoC
> - support
> -
> -A CN9130 SoC has one AP807 and one internal CP115.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/cn9130.dtsi | 37
> +++++++++++++++++++++++++
> - 1 file changed, 37 insertions(+)
> - create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi
> -
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
> -@@ -0,0 +1,37 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Copyright (C) 2019 Marvell International Ltd.
> -+ *
> -+ * Device tree for the CN9130 SoC.
> -+ */
> -+
> -+#include "armada-ap807-quad.dtsi"
> -+
> -+/ {
> -+	model = "Marvell Armada CN9130 SoC";
> -+	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
> -+		     "marvell,armada-ap807";
> -+};
> -+
> -+/*
> -+ * Instantiate the internal CP115
> -+ */
> -+
> -+#define CP11X_NAME		cp0
> -+#define CP11X_BASE		f2000000
> -+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
> -+						    0xe0000000 + ((iface - 1) *
> 0x1000000))
> -+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 :
> 0xf00000)
> -+#define CP11X_PCIE0_BASE	f2600000
> -+#define CP11X_PCIE1_BASE	f2620000
> -+#define CP11X_PCIE2_BASE	f2640000
> -+
> -+#include "armada-cp115.dtsi"
> -+
> -+#undef CP11X_NAME
> -+#undef CP11X_BASE
> -+#undef CP11X_PCIEx_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_SIZE
> -+#undef CP11X_PCIE0_BASE
> -+#undef CP11X_PCIE1_BASE
> -+#undef CP11X_PCIE2_BASE
> diff --git a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-
> endpoint-to-be-ready-before-tr.patch b/target/linux/mvebu/patches-
> 5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
> deleted file mode 100644
> index 31f5accab6..0000000000
> --- a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-
> to-be-ready-before-tr.patch
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -From f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 Mon Sep 17 00:00:00
> 2001
> -From: Remi Pommarel <repk@triplefau.lt>
> -Date: Wed, 22 May 2019 23:33:50 +0200
> -Subject: [PATCH] PCI: aardvark: Wait for endpoint to be ready before
> training
> - link
> -
> -When configuring pcie reset pin from gpio (e.g. initially set by
> -u-boot) to pcie function this pin goes low for a brief moment
> -asserting the PERST# signal. Thus connected device enters fundamental
> -reset process and link configuration can only begin after a minimal
> -100ms delay (see [1]).
> -
> -Because the pin configuration comes from the "default" pinctrl it is
> -implicitly configured before the probe callback is called:
> -
> -driver_probe_device()
> -  really_probe()
> -    ...
> -    pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
> -                           function and PERST# is asserted */
> -    ...
> -    drv->probe()
> -
> -[1] "PCI Express Base Specification", REV. 4.0
> -    PCI Express, February 19 2014, 6.6.1 Conventional Reset
> -
> -Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 8 ++++++++
> - 1 file changed, 8 insertions(+)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -349,6 +349,14 @@ static void advk_pcie_setup_hw(struct ad
> - 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
> - 	advk_writel(pcie, reg, PIO_CTRL);
> -
> -+	/*
> -+	 * PERST# signal could have been asserted by pinctrl subsystem
> before
> -+	 * probe() callback has been called, making the endpoint going into
> -+	 * fundamental reset. As required by PCI Express spec a delay for at
> -+	 * least 100ms after such a reset before link training is needed.
> -+	 */
> -+	msleep(PCI_PM_D3COLD_WAIT);
> -+
> - 	/* Start link training */
> - 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> - 	reg |= PCIE_CORE_LINK_TRAINING;
> diff --git a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-
> Add-support-for-CP115.patch b/target/linux/mvebu/patches-5.4/001-v5.5-
> arm64-dts-marvell-Add-support-for-CP115.patch
> deleted file mode 100644
> index 1ef87ed227..0000000000
> --- a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-
> support-for-CP115.patch
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:32 +0200
> -Subject: [PATCH] arm64: dts: marvell: Add support for CP115
> -
> -Create a DTSI file based on the CP11x one. Differences will be
> -described in the near future.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++
> - 1 file changed, 12 insertions(+)
> - create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi
> -
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
> -@@ -0,0 +1,12 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Copyright (C) 2019 Marvell Technology Group Ltd.
> -+ *
> -+ * Device Tree file for Marvell Armada CP115.
> -+ */
> -+
> -+#define CP11X_TYPE cp115
> -+
> -+#include "armada-cp11x.dtsi"
> -+
> -+#undef CP11X_TYPE
> diff --git a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-
> Prepare-the-introduction-of-CP115.patch b/target/linux/mvebu/patches-
> 5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
> deleted file mode 100644
> index 5e41f548d6..0000000000
> --- a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-
> the-introduction-of-CP115.patch
> +++ /dev/null
> @@ -1,1318 +0,0 @@
> -From 47cf40af64c35a69ef6a193c47768ad1bda29db2 Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:29 +0200
> -Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of CP115
> -
> -CP110 and CP115 are almost the same in terms of features and have a
> -very limited set of differences. Let's create an armada-cp11x.dtsi
> -file which will be used to instantiate both CP110 and CP115
> -nodes.
> -
> -The only changes between the two armada-cp11{0,x}.dtsi files are the
> -following naming in macros: s/CP110/CP11X/.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |  28 +-
> - arch/arm64/boot/dts/marvell/armada-80x0.dtsi  |  56 +-
> - .../arm64/boot/dts/marvell/armada-common.dtsi |   4 +-
> - arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +----------------
> - arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579
> ++++++++++++++++++
> - 5 files changed, 627 insertions(+), 615 deletions(-)
> - create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -@@ -17,23 +17,23 @@
> - /*
> -  * Instantiate the CP110
> -  */
> --#define CP110_NAME		cp0
> --#define CP110_BASE		f2000000
> --#define CP110_PCIE_IO_BASE	0xf9000000
> --#define CP110_PCIE_MEM_BASE	0xf6000000
> --#define CP110_PCIE0_BASE	f2600000
> --#define CP110_PCIE1_BASE	f2620000
> --#define CP110_PCIE2_BASE	f2640000
> -+#define CP11X_NAME		cp0
> -+#define CP11X_BASE		f2000000
> -+#define CP11X_PCIE_IO_BASE	0xf9000000
> -+#define CP11X_PCIE_MEM_BASE	0xf6000000
> -+#define CP11X_PCIE0_BASE	f2600000
> -+#define CP11X_PCIE1_BASE	f2620000
> -+#define CP11X_PCIE2_BASE	f2640000
> -
> - #include "armada-cp110.dtsi"
> -
> --#undef CP110_NAME
> --#undef CP110_BASE
> --#undef CP110_PCIE_IO_BASE
> --#undef CP110_PCIE_MEM_BASE
> --#undef CP110_PCIE0_BASE
> --#undef CP110_PCIE1_BASE
> --#undef CP110_PCIE2_BASE
> -+#undef CP11X_NAME
> -+#undef CP11X_BASE
> -+#undef CP11X_PCIE_IO_BASE
> -+#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIE0_BASE
> -+#undef CP11X_PCIE1_BASE
> -+#undef CP11X_PCIE2_BASE
> -
> - &cp0_gpio1 {
> - 	status = "okay";
> ---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -@@ -19,44 +19,44 @@
> - /*
> -  * Instantiate the master CP110
> -  */
> --#define CP110_NAME		cp0
> --#define CP110_BASE		f2000000
> --#define CP110_PCIE_IO_BASE	0xf9000000
> --#define CP110_PCIE_MEM_BASE	0xf6000000
> --#define CP110_PCIE0_BASE	f2600000
> --#define CP110_PCIE1_BASE	f2620000
> --#define CP110_PCIE2_BASE	f2640000
> -+#define CP11X_NAME		cp0
> -+#define CP11X_BASE		f2000000
> -+#define CP11X_PCIE_IO_BASE	0xf9000000
> -+#define CP11X_PCIE_MEM_BASE	0xf6000000
> -+#define CP11X_PCIE0_BASE	f2600000
> -+#define CP11X_PCIE1_BASE	f2620000
> -+#define CP11X_PCIE2_BASE	f2640000
> -
> - #include "armada-cp110.dtsi"
> -
> --#undef CP110_NAME
> --#undef CP110_BASE
> --#undef CP110_PCIE_IO_BASE
> --#undef CP110_PCIE_MEM_BASE
> --#undef CP110_PCIE0_BASE
> --#undef CP110_PCIE1_BASE
> --#undef CP110_PCIE2_BASE
> -+#undef CP11X_NAME
> -+#undef CP11X_BASE
> -+#undef CP11X_PCIE_IO_BASE
> -+#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIE0_BASE
> -+#undef CP11X_PCIE1_BASE
> -+#undef CP11X_PCIE2_BASE
> -
> - /*
> -  * Instantiate the slave CP110
> -  */
> --#define CP110_NAME		cp1
> --#define CP110_BASE		f4000000
> --#define CP110_PCIE_IO_BASE	0xfd000000
> --#define CP110_PCIE_MEM_BASE	0xfa000000
> --#define CP110_PCIE0_BASE	f4600000
> --#define CP110_PCIE1_BASE	f4620000
> --#define CP110_PCIE2_BASE	f4640000
> -+#define CP11X_NAME		cp1
> -+#define CP11X_BASE		f4000000
> -+#define CP11X_PCIE_IO_BASE	0xfd000000
> -+#define CP11X_PCIE_MEM_BASE	0xfa000000
> -+#define CP11X_PCIE0_BASE	f4600000
> -+#define CP11X_PCIE1_BASE	f4620000
> -+#define CP11X_PCIE2_BASE	f4640000
> -
> - #include "armada-cp110.dtsi"
> -
> --#undef CP110_NAME
> --#undef CP110_BASE
> --#undef CP110_PCIE_IO_BASE
> --#undef CP110_PCIE_MEM_BASE
> --#undef CP110_PCIE0_BASE
> --#undef CP110_PCIE1_BASE
> --#undef CP110_PCIE2_BASE
> -+#undef CP11X_NAME
> -+#undef CP11X_BASE
> -+#undef CP11X_PCIE_IO_BASE
> -+#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIE0_BASE
> -+#undef CP11X_PCIE1_BASE
> -+#undef CP11X_PCIE2_BASE
> -
> - /* The 80x0 has two CP blocks, but uses only one block from each. */
> - &cp1_gpio1 {
> ---- a/arch/arm64/boot/dts/marvell/armada-common.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
> -@@ -6,6 +6,6 @@
> - /* Common definitions used by Armada 7K/8K DTs */
> - #define PASTER(x, y) x ## y
> - #define EVALUATOR(x, y) PASTER(x, y)
> --#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_,
> name))
> --#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME,
> EVALUATOR(-, name))
> -+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_,
> name))
> -+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME,
> EVALUATOR(-, name))
> - #define ADDRESSIFY(addr) EVALUATOR(0x, addr)
> ---- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> -@@ -1,579 +1,12 @@
> - // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> - /*
> -- * Copyright (C) 2016 Marvell Technology Group Ltd.
> -+ * Copyright (C) 2019 Marvell Technology Group Ltd.
> -  *
> -  * Device Tree file for Marvell Armada CP110.
> -  */
> -
> --#include <dt-bindings/interrupt-controller/mvebu-icu.h>
> --#include <dt-bindings/thermal/thermal.h>
> -+#define CP11X_TYPE cp110
> -
> --#include "armada-common.dtsi"
> -+#include "armada-cp11x.dtsi"
> -
> --#define CP110_PCIEx_IO_BASE(iface)	(CP110_PCIE_IO_BASE + (iface
> *  0x10000))
> --#define CP110_PCIEx_MEM_BASE(iface)	(CP110_PCIE_MEM_BASE +
> (iface *  0x1000000))
> --#define CP110_PCIEx_CONF_BASE(iface)
> 	(CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
> --
> --/ {
> --	/*
> --	 * The contents of the node are defined below, in order to
> --	 * save one indentation level
> --	 */
> --	CP110_NAME: CP110_NAME { };
> --
> --	/*
> --	 * CPs only have one sensor in the thermal IC.
> --	 *
> --	 * The cooling maps are empty as there are no cooling devices.
> --	 */
> --	thermal-zones {
> --		CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
> --			polling-delay-passive = <0>; /* Interrupt driven */
> --			polling-delay = <0>; /* Interrupt driven */
> --
> --			thermal-sensors = <&CP110_LABEL(thermal) 0>;
> --
> --			trips {
> --				CP110_LABEL(crit): crit {
> --					temperature = <100000>; /* mC
> degrees */
> --					hysteresis = <2000>; /* mC degrees */
> --					type = "critical";
> --				};
> --			};
> --
> --			cooling-maps { };
> --		};
> --	};
> --};
> --
> --&CP110_NAME {
> --	#address-cells = <2>;
> --	#size-cells = <2>;
> --	compatible = "simple-bus";
> --	interrupt-parent = <&CP110_LABEL(icu_nsr)>;
> --	ranges;
> --
> --	config-space@CP110_BASE {
> --		#address-cells = <1>;
> --		#size-cells = <1>;
> --		compatible = "simple-bus";
> --		ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
> --
> --		CP110_LABEL(ethernet): ethernet@0 {
> --			compatible = "marvell,armada-7k-pp22";
> --			reg = <0x0 0x100000>, <0x129000 0xb000>;
> --			clocks = <&CP110_LABEL(clk) 1 3>,
> <&CP110_LABEL(clk) 1 9>,
> --				 <&CP110_LABEL(clk) 1 5>,
> <&CP110_LABEL(clk) 1 6>,
> --				 <&CP110_LABEL(clk) 1 18>;
> --			clock-names = "pp_clk", "gop_clk",
> --				      "mg_clk", "mg_core_clk", "axi_clk";
> --			marvell,system-controller =
> <&CP110_LABEL(syscon0)>;
> --			status = "disabled";
> --			dma-coherent;
> --
> --			CP110_LABEL(eth0): eth0 {
> --				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
> --					<43 IRQ_TYPE_LEVEL_HIGH>,
> --					<47 IRQ_TYPE_LEVEL_HIGH>,
> --					<51 IRQ_TYPE_LEVEL_HIGH>,
> --					<55 IRQ_TYPE_LEVEL_HIGH>,
> --					<59 IRQ_TYPE_LEVEL_HIGH>,
> --					<63 IRQ_TYPE_LEVEL_HIGH>,
> --					<67 IRQ_TYPE_LEVEL_HIGH>,
> --					<71 IRQ_TYPE_LEVEL_HIGH>,
> --					<129 IRQ_TYPE_LEVEL_HIGH>;
> --				interrupt-names = "hif0", "hif1", "hif2",
> --					"hif3", "hif4", "hif5", "hif6", "hif7",
> --					"hif8", "link";
> --				port-id = <0>;
> --				gop-port-id = <0>;
> --				status = "disabled";
> --			};
> --
> --			CP110_LABEL(eth1): eth1 {
> --				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
> --					<44 IRQ_TYPE_LEVEL_HIGH>,
> --					<48 IRQ_TYPE_LEVEL_HIGH>,
> --					<52 IRQ_TYPE_LEVEL_HIGH>,
> --					<56 IRQ_TYPE_LEVEL_HIGH>,
> --					<60 IRQ_TYPE_LEVEL_HIGH>,
> --					<64 IRQ_TYPE_LEVEL_HIGH>,
> --					<68 IRQ_TYPE_LEVEL_HIGH>,
> --					<72 IRQ_TYPE_LEVEL_HIGH>,
> --					<128 IRQ_TYPE_LEVEL_HIGH>;
> --				interrupt-names = "hif0", "hif1", "hif2",
> --					"hif3", "hif4", "hif5", "hif6", "hif7",
> --					"hif8", "link";
> --				port-id = <1>;
> --				gop-port-id = <2>;
> --				status = "disabled";
> --			};
> --
> --			CP110_LABEL(eth2): eth2 {
> --				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
> --					<45 IRQ_TYPE_LEVEL_HIGH>,
> --					<49 IRQ_TYPE_LEVEL_HIGH>,
> --					<53 IRQ_TYPE_LEVEL_HIGH>,
> --					<57 IRQ_TYPE_LEVEL_HIGH>,
> --					<61 IRQ_TYPE_LEVEL_HIGH>,
> --					<65 IRQ_TYPE_LEVEL_HIGH>,
> --					<69 IRQ_TYPE_LEVEL_HIGH>,
> --					<73 IRQ_TYPE_LEVEL_HIGH>,
> --					<127 IRQ_TYPE_LEVEL_HIGH>;
> --				interrupt-names = "hif0", "hif1", "hif2",
> --					"hif3", "hif4", "hif5", "hif6", "hif7",
> --					"hif8", "link";
> --				port-id = <2>;
> --				gop-port-id = <3>;
> --				status = "disabled";
> --			};
> --		};
> --
> --		CP110_LABEL(comphy): phy@120000 {
> --			compatible = "marvell,comphy-cp110";
> --			reg = <0x120000 0x6000>;
> --			marvell,system-controller =
> <&CP110_LABEL(syscon0)>;
> --			clocks = <&CP110_LABEL(clk) 1 5>,
> <&CP110_LABEL(clk) 1 6>,
> --				 <&CP110_LABEL(clk) 1 18>;
> --			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --
> --			CP110_LABEL(comphy0): phy@0 {
> --				reg = <0>;
> --				#phy-cells = <1>;
> --			};
> --
> --			CP110_LABEL(comphy1): phy@1 {
> --				reg = <1>;
> --				#phy-cells = <1>;
> --			};
> --
> --			CP110_LABEL(comphy2): phy@2 {
> --				reg = <2>;
> --				#phy-cells = <1>;
> --			};
> --
> --			CP110_LABEL(comphy3): phy@3 {
> --				reg = <3>;
> --				#phy-cells = <1>;
> --			};
> --
> --			CP110_LABEL(comphy4): phy@4 {
> --				reg = <4>;
> --				#phy-cells = <1>;
> --			};
> --
> --			CP110_LABEL(comphy5): phy@5 {
> --				reg = <5>;
> --				#phy-cells = <1>;
> --			};
> --		};
> --
> --		CP110_LABEL(mdio): mdio@12a200 {
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			compatible = "marvell,orion-mdio";
> --			reg = <0x12a200 0x10>;
> --			clocks = <&CP110_LABEL(clk) 1 9>,
> <&CP110_LABEL(clk) 1 5>,
> --				 <&CP110_LABEL(clk) 1 6>,
> <&CP110_LABEL(clk) 1 18>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(xmdio): mdio@12a600 {
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			compatible = "marvell,xmdio";
> --			reg = <0x12a600 0x10>;
> --			clocks = <&CP110_LABEL(clk) 1 5>,
> --				 <&CP110_LABEL(clk) 1 6>,
> <&CP110_LABEL(clk) 1 18>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(icu): interrupt-controller@1e0000 {
> --			compatible = "marvell,cp110-icu";
> --			reg = <0x1e0000 0x440>;
> --			#address-cells = <1>;
> --			#size-cells = <1>;
> --
> --			CP110_LABEL(icu_nsr): interrupt-controller@10 {
> --				compatible = "marvell,cp110-icu-nsr";
> --				reg = <0x10 0x20>;
> --				#interrupt-cells = <2>;
> --				interrupt-controller;
> --				msi-parent = <&gicp>;
> --			};
> --
> --			CP110_LABEL(icu_sei): interrupt-controller@50 {
> --				compatible = "marvell,cp110-icu-sei";
> --				reg = <0x50 0x10>;
> --				#interrupt-cells = <2>;
> --				interrupt-controller;
> --				msi-parent = <&sei>;
> --			};
> --		};
> --
> --		CP110_LABEL(rtc): rtc@284000 {
> --			compatible = "marvell,armada-8k-rtc";
> --			reg = <0x284000 0x20>, <0x284080 0x24>;
> --			reg-names = "rtc", "rtc-soc";
> --			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
> --		};
> --
> --		CP110_LABEL(syscon0): system-controller@440000 {
> --			compatible = "syscon", "simple-mfd";
> --			reg = <0x440000 0x2000>;
> --
> --			CP110_LABEL(clk): clock {
> --				compatible = "marvell,cp110-clock";
> --				#clock-cells = <2>;
> --			};
> --
> --			CP110_LABEL(gpio1): gpio@100 {
> --				compatible = "marvell,armada-8k-gpio";
> --				offset = <0x100>;
> --				ngpios = <32>;
> --				gpio-controller;
> --				#gpio-cells = <2>;
> --				gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
> --				interrupt-controller;
> --				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
> --					<85 IRQ_TYPE_LEVEL_HIGH>,
> --					<84 IRQ_TYPE_LEVEL_HIGH>,
> --					<83 IRQ_TYPE_LEVEL_HIGH>;
> --				#interrupt-cells = <2>;
> --				status = "disabled";
> --			};
> --
> --			CP110_LABEL(gpio2): gpio@140 {
> --				compatible = "marvell,armada-8k-gpio";
> --				offset = <0x140>;
> --				ngpios = <31>;
> --				gpio-controller;
> --				#gpio-cells = <2>;
> --				gpio-ranges = <&CP110_LABEL(pinctrl) 0 32
> 31>;
> --				interrupt-controller;
> --				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
> --					<81 IRQ_TYPE_LEVEL_HIGH>,
> --					<80 IRQ_TYPE_LEVEL_HIGH>,
> --					<79 IRQ_TYPE_LEVEL_HIGH>;
> --				#interrupt-cells = <2>;
> --				status = "disabled";
> --			};
> --		};
> --
> --		CP110_LABEL(syscon1): system-controller@400000 {
> --			compatible = "syscon", "simple-mfd";
> --			reg = <0x400000 0x1000>;
> --			#address-cells = <1>;
> --			#size-cells = <1>;
> --
> --			CP110_LABEL(thermal): thermal-sensor@70 {
> --				compatible = "marvell,armada-cp110-
> thermal";
> --				reg = <0x70 0x10>;
> --				interrupts-extended =
> --					<&CP110_LABEL(icu_sei) 116
> IRQ_TYPE_LEVEL_HIGH>;
> --				#thermal-sensor-cells = <1>;
> --			};
> --		};
> --
> --		CP110_LABEL(usb3_0): usb3@500000 {
> --			compatible = "marvell,armada-8k-xhci",
> --			"generic-xhci";
> --			reg = <0x500000 0x4000>;
> --			dma-coherent;
> --			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 22>,
> --				 <&CP110_LABEL(clk) 1 16>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(usb3_1): usb3@510000 {
> --			compatible = "marvell,armada-8k-xhci",
> --			"generic-xhci";
> --			reg = <0x510000 0x4000>;
> --			dma-coherent;
> --			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 23>,
> --				 <&CP110_LABEL(clk) 1 16>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(sata0): sata@540000 {
> --			compatible = "marvell,armada-8k-ahci",
> --			"generic-ahci";
> --			reg = <0x540000 0x30000>;
> --			dma-coherent;
> --			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
> --			clocks = <&CP110_LABEL(clk) 1 15>,
> --				 <&CP110_LABEL(clk) 1 16>;
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			status = "disabled";
> --
> --			sata-port@0 {
> --				reg = <0>;
> --			};
> --
> --			sata-port@1 {
> --				reg = <1>;
> --			};
> --		};
> --
> --		CP110_LABEL(xor0): xor@6a0000 {
> --			compatible = "marvell,armada-7k-xor", "marvell,xor-
> v2";
> --			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
> --			dma-coherent;
> --			msi-parent = <&gic_v2m0>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 8>,
> --				 <&CP110_LABEL(clk) 1 14>;
> --		};
> --
> --		CP110_LABEL(xor1): xor@6c0000 {
> --			compatible = "marvell,armada-7k-xor", "marvell,xor-
> v2";
> --			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
> --			dma-coherent;
> --			msi-parent = <&gic_v2m0>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 7>,
> --				 <&CP110_LABEL(clk) 1 14>;
> --		};
> --
> --		CP110_LABEL(spi0): spi@700600 {
> --			compatible = "marvell,armada-380-spi";
> --			reg = <0x700600 0x50>;
> --			#address-cells = <0x1>;
> --			#size-cells = <0x0>;
> --			clock-names = "core", "axi";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(spi1): spi@700680 {
> --			compatible = "marvell,armada-380-spi";
> --			reg = <0x700680 0x50>;
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			clock-names = "core", "axi";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(i2c0): i2c@701000 {
> --			compatible = "marvell,mv78230-i2c";
> --			reg = <0x701000 0x20>;
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(i2c1): i2c@701100 {
> --			compatible = "marvell,mv78230-i2c";
> --			reg = <0x701100 0x20>;
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(uart0): serial@702000 {
> --			compatible = "snps,dw-apb-uart";
> --			reg = <0x702000 0x100>;
> --			reg-shift = <2>;
> --			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
> --			reg-io-width = <1>;
> --			clock-names = "baudclk", "apb_pclk";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(uart1): serial@702100 {
> --			compatible = "snps,dw-apb-uart";
> --			reg = <0x702100 0x100>;
> --			reg-shift = <2>;
> --			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
> --			reg-io-width = <1>;
> --			clock-names = "baudclk", "apb_pclk";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(uart2): serial@702200 {
> --			compatible = "snps,dw-apb-uart";
> --			reg = <0x702200 0x100>;
> --			reg-shift = <2>;
> --			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
> --			reg-io-width = <1>;
> --			clock-names = "baudclk", "apb_pclk";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(uart3): serial@702300 {
> --			compatible = "snps,dw-apb-uart";
> --			reg = <0x702300 0x100>;
> --			reg-shift = <2>;
> --			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
> --			reg-io-width = <1>;
> --			clock-names = "baudclk", "apb_pclk";
> --			clocks = <&CP110_LABEL(clk) 1 21>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(nand_controller): nand@720000 {
> --			/*
> --			 * Due to the limitation of the pins available
> --			 * this controller is only usable on the CPM
> --			 * for A7K and on the CPS for A8K.
> --			 */
> --			compatible = "marvell,armada-8k-nand-controller",
> --				"marvell,armada370-nand-controller";
> --			reg = <0x720000 0x54>;
> --			#address-cells = <1>;
> --			#size-cells = <0>;
> --			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 2>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			marvell,system-controller =
> <&CP110_LABEL(syscon0)>;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(trng): trng@760000 {
> --			compatible = "marvell,armada-8k-rng",
> --			"inside-secure,safexcel-eip76";
> --			reg = <0x760000 0x7d>;
> --			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 25>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			status = "okay";
> --		};
> --
> --		CP110_LABEL(sdhci0): sdhci@780000 {
> --			compatible = "marvell,armada-cp110-sdhci";
> --			reg = <0x780000 0x300>;
> --			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
> --			clock-names = "core", "axi";
> --			clocks = <&CP110_LABEL(clk) 1 4>,
> <&CP110_LABEL(clk) 1 18>;
> --			dma-coherent;
> --			status = "disabled";
> --		};
> --
> --		CP110_LABEL(crypto): crypto@800000 {
> --			compatible = "inside-secure,safexcel-eip197b";
> --			reg = <0x800000 0x200000>;
> --			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
> --				<88 IRQ_TYPE_LEVEL_HIGH>,
> --				<89 IRQ_TYPE_LEVEL_HIGH>,
> --				<90 IRQ_TYPE_LEVEL_HIGH>,
> --				<91 IRQ_TYPE_LEVEL_HIGH>,
> --				<92 IRQ_TYPE_LEVEL_HIGH>;
> --			interrupt-names = "mem", "ring0", "ring1",
> --				"ring2", "ring3", "eip";
> --			clock-names = "core", "reg";
> --			clocks = <&CP110_LABEL(clk) 1 26>,
> --				 <&CP110_LABEL(clk) 1 17>;
> --			dma-coherent;
> --		};
> --	};
> --
> --	CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
> --		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> --		reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
> --		      <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
> --		reg-names = "ctrl", "config";
> --		#address-cells = <3>;
> --		#size-cells = <2>;
> --		#interrupt-cells = <1>;
> --		device_type = "pci";
> --		dma-coherent;
> --		msi-parent = <&gic_v2m0>;
> --
> --		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0
> CP110_PCIEx_IO_BASE(0) 0 0x10000
> --		/* non-prefetchable memory */
> --		0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0
> CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
> --		interrupt-map-mask = <0 0 0 0>;
> --		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22
> IRQ_TYPE_LEVEL_HIGH>;
> --		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
> --		num-lanes = <1>;
> --		clock-names = "core", "reg";
> --		clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1
> 14>;
> --		status = "disabled";
> --	};
> --
> --	CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
> --		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> --		reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
> --		      <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
> --		reg-names = "ctrl", "config";
> --		#address-cells = <3>;
> --		#size-cells = <2>;
> --		#interrupt-cells = <1>;
> --		device_type = "pci";
> --		dma-coherent;
> --		msi-parent = <&gic_v2m0>;
> --
> --		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0
> CP110_PCIEx_IO_BASE(1) 0 0x10000
> --		/* non-prefetchable memory */
> --		0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0
> CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
> --		interrupt-map-mask = <0 0 0 0>;
> --		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24
> IRQ_TYPE_LEVEL_HIGH>;
> --		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> --
> --		num-lanes = <1>;
> --		clock-names = "core", "reg";
> --		clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1
> 14>;
> --		status = "disabled";
> --	};
> --
> --	CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
> --		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> --		reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
> --		      <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
> --		reg-names = "ctrl", "config";
> --		#address-cells = <3>;
> --		#size-cells = <2>;
> --		#interrupt-cells = <1>;
> --		device_type = "pci";
> --		dma-coherent;
> --		msi-parent = <&gic_v2m0>;
> --
> --		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0
> CP110_PCIEx_IO_BASE(2) 0 0x10000
> --		/* non-prefetchable memory */
> --		0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0
> CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
> --		interrupt-map-mask = <0 0 0 0>;
> --		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23
> IRQ_TYPE_LEVEL_HIGH>;
> --		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
> --
> --		num-lanes = <1>;
> --		clock-names = "core", "reg";
> --		clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1
> 14>;
> --		status = "disabled";
> --	};
> --};
> -+#undef CP11X_TYPE
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -@@ -0,0 +1,579 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Copyright (C) 2016 Marvell Technology Group Ltd.
> -+ *
> -+ * Device Tree file for Marvell Armada CP11x.
> -+ */
> -+
> -+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
> -+#include <dt-bindings/thermal/thermal.h>
> -+
> -+#include "armada-common.dtsi"
> -+
> -+#define CP11X_PCIEx_IO_BASE(iface)	(CP11X_PCIE_IO_BASE + (iface
> *  0x10000))
> -+#define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE +
> (iface *  0x1000000))
> -+#define CP11X_PCIEx_CONF_BASE(iface)
> 	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
> -+
> -+/ {
> -+	/*
> -+	 * The contents of the node are defined below, in order to
> -+	 * save one indentation level
> -+	 */
> -+	CP11X_NAME: CP11X_NAME { };
> -+
> -+	/*
> -+	 * CPs only have one sensor in the thermal IC.
> -+	 *
> -+	 * The cooling maps are empty as there are no cooling devices.
> -+	 */
> -+	thermal-zones {
> -+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
> -+			polling-delay-passive = <0>; /* Interrupt driven */
> -+			polling-delay = <0>; /* Interrupt driven */
> -+
> -+			thermal-sensors = <&CP11X_LABEL(thermal) 0>;
> -+
> -+			trips {
> -+				CP11X_LABEL(crit): crit {
> -+					temperature = <100000>; /* mC
> degrees */
> -+					hysteresis = <2000>; /* mC degrees */
> -+					type = "critical";
> -+				};
> -+			};
> -+
> -+			cooling-maps { };
> -+		};
> -+	};
> -+};
> -+
> -+&CP11X_NAME {
> -+	#address-cells = <2>;
> -+	#size-cells = <2>;
> -+	compatible = "simple-bus";
> -+	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
> -+	ranges;
> -+
> -+	config-space@CP11X_BASE {
> -+		#address-cells = <1>;
> -+		#size-cells = <1>;
> -+		compatible = "simple-bus";
> -+		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
> -+
> -+		CP11X_LABEL(ethernet): ethernet@0 {
> -+			compatible = "marvell,armada-7k-pp22";
> -+			reg = <0x0 0x100000>, <0x129000 0xb000>;
> -+			clocks = <&CP11X_LABEL(clk) 1 3>,
> <&CP11X_LABEL(clk) 1 9>,
> -+				 <&CP11X_LABEL(clk) 1 5>,
> <&CP11X_LABEL(clk) 1 6>,
> -+				 <&CP11X_LABEL(clk) 1 18>;
> -+			clock-names = "pp_clk", "gop_clk",
> -+				      "mg_clk", "mg_core_clk", "axi_clk";
> -+			marvell,system-controller =
> <&CP11X_LABEL(syscon0)>;
> -+			status = "disabled";
> -+			dma-coherent;
> -+
> -+			CP11X_LABEL(eth0): eth0 {
> -+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
> -+					<43 IRQ_TYPE_LEVEL_HIGH>,
> -+					<47 IRQ_TYPE_LEVEL_HIGH>,
> -+					<51 IRQ_TYPE_LEVEL_HIGH>,
> -+					<55 IRQ_TYPE_LEVEL_HIGH>,
> -+					<59 IRQ_TYPE_LEVEL_HIGH>,
> -+					<63 IRQ_TYPE_LEVEL_HIGH>,
> -+					<67 IRQ_TYPE_LEVEL_HIGH>,
> -+					<71 IRQ_TYPE_LEVEL_HIGH>,
> -+					<129 IRQ_TYPE_LEVEL_HIGH>;
> -+				interrupt-names = "hif0", "hif1", "hif2",
> -+					"hif3", "hif4", "hif5", "hif6", "hif7",
> -+					"hif8", "link";
> -+				port-id = <0>;
> -+				gop-port-id = <0>;
> -+				status = "disabled";
> -+			};
> -+
> -+			CP11X_LABEL(eth1): eth1 {
> -+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
> -+					<44 IRQ_TYPE_LEVEL_HIGH>,
> -+					<48 IRQ_TYPE_LEVEL_HIGH>,
> -+					<52 IRQ_TYPE_LEVEL_HIGH>,
> -+					<56 IRQ_TYPE_LEVEL_HIGH>,
> -+					<60 IRQ_TYPE_LEVEL_HIGH>,
> -+					<64 IRQ_TYPE_LEVEL_HIGH>,
> -+					<68 IRQ_TYPE_LEVEL_HIGH>,
> -+					<72 IRQ_TYPE_LEVEL_HIGH>,
> -+					<128 IRQ_TYPE_LEVEL_HIGH>;
> -+				interrupt-names = "hif0", "hif1", "hif2",
> -+					"hif3", "hif4", "hif5", "hif6", "hif7",
> -+					"hif8", "link";
> -+				port-id = <1>;
> -+				gop-port-id = <2>;
> -+				status = "disabled";
> -+			};
> -+
> -+			CP11X_LABEL(eth2): eth2 {
> -+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
> -+					<45 IRQ_TYPE_LEVEL_HIGH>,
> -+					<49 IRQ_TYPE_LEVEL_HIGH>,
> -+					<53 IRQ_TYPE_LEVEL_HIGH>,
> -+					<57 IRQ_TYPE_LEVEL_HIGH>,
> -+					<61 IRQ_TYPE_LEVEL_HIGH>,
> -+					<65 IRQ_TYPE_LEVEL_HIGH>,
> -+					<69 IRQ_TYPE_LEVEL_HIGH>,
> -+					<73 IRQ_TYPE_LEVEL_HIGH>,
> -+					<127 IRQ_TYPE_LEVEL_HIGH>;
> -+				interrupt-names = "hif0", "hif1", "hif2",
> -+					"hif3", "hif4", "hif5", "hif6", "hif7",
> -+					"hif8", "link";
> -+				port-id = <2>;
> -+				gop-port-id = <3>;
> -+				status = "disabled";
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(comphy): phy@120000 {
> -+			compatible = "marvell,comphy-cp110";
> -+			reg = <0x120000 0x6000>;
> -+			marvell,system-controller =
> <&CP11X_LABEL(syscon0)>;
> -+			clocks = <&CP11X_LABEL(clk) 1 5>,
> <&CP11X_LABEL(clk) 1 6>,
> -+				 <&CP11X_LABEL(clk) 1 18>;
> -+			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+
> -+			CP11X_LABEL(comphy0): phy@0 {
> -+				reg = <0>;
> -+				#phy-cells = <1>;
> -+			};
> -+
> -+			CP11X_LABEL(comphy1): phy@1 {
> -+				reg = <1>;
> -+				#phy-cells = <1>;
> -+			};
> -+
> -+			CP11X_LABEL(comphy2): phy@2 {
> -+				reg = <2>;
> -+				#phy-cells = <1>;
> -+			};
> -+
> -+			CP11X_LABEL(comphy3): phy@3 {
> -+				reg = <3>;
> -+				#phy-cells = <1>;
> -+			};
> -+
> -+			CP11X_LABEL(comphy4): phy@4 {
> -+				reg = <4>;
> -+				#phy-cells = <1>;
> -+			};
> -+
> -+			CP11X_LABEL(comphy5): phy@5 {
> -+				reg = <5>;
> -+				#phy-cells = <1>;
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(mdio): mdio@12a200 {
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			compatible = "marvell,orion-mdio";
> -+			reg = <0x12a200 0x10>;
> -+			clocks = <&CP11X_LABEL(clk) 1 9>,
> <&CP11X_LABEL(clk) 1 5>,
> -+				 <&CP11X_LABEL(clk) 1 6>,
> <&CP11X_LABEL(clk) 1 18>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(xmdio): mdio@12a600 {
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			compatible = "marvell,xmdio";
> -+			reg = <0x12a600 0x10>;
> -+			clocks = <&CP11X_LABEL(clk) 1 5>,
> -+				 <&CP11X_LABEL(clk) 1 6>,
> <&CP11X_LABEL(clk) 1 18>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(icu): interrupt-controller@1e0000 {
> -+			compatible = "marvell,cp110-icu";
> -+			reg = <0x1e0000 0x440>;
> -+			#address-cells = <1>;
> -+			#size-cells = <1>;
> -+
> -+			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
> -+				compatible = "marvell,cp110-icu-nsr";
> -+				reg = <0x10 0x20>;
> -+				#interrupt-cells = <2>;
> -+				interrupt-controller;
> -+				msi-parent = <&gicp>;
> -+			};
> -+
> -+			CP11X_LABEL(icu_sei): interrupt-controller@50 {
> -+				compatible = "marvell,cp110-icu-sei";
> -+				reg = <0x50 0x10>;
> -+				#interrupt-cells = <2>;
> -+				interrupt-controller;
> -+				msi-parent = <&sei>;
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(rtc): rtc@284000 {
> -+			compatible = "marvell,armada-8k-rtc";
> -+			reg = <0x284000 0x20>, <0x284080 0x24>;
> -+			reg-names = "rtc", "rtc-soc";
> -+			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
> -+		};
> -+
> -+		CP11X_LABEL(syscon0): system-controller@440000 {
> -+			compatible = "syscon", "simple-mfd";
> -+			reg = <0x440000 0x2000>;
> -+
> -+			CP11X_LABEL(clk): clock {
> -+				compatible = "marvell,cp110-clock";
> -+				#clock-cells = <2>;
> -+			};
> -+
> -+			CP11X_LABEL(gpio1): gpio@100 {
> -+				compatible = "marvell,armada-8k-gpio";
> -+				offset = <0x100>;
> -+				ngpios = <32>;
> -+				gpio-controller;
> -+				#gpio-cells = <2>;
> -+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0
> 32>;
> -+				interrupt-controller;
> -+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
> -+					<85 IRQ_TYPE_LEVEL_HIGH>,
> -+					<84 IRQ_TYPE_LEVEL_HIGH>,
> -+					<83 IRQ_TYPE_LEVEL_HIGH>;
> -+				#interrupt-cells = <2>;
> -+				status = "disabled";
> -+			};
> -+
> -+			CP11X_LABEL(gpio2): gpio@140 {
> -+				compatible = "marvell,armada-8k-gpio";
> -+				offset = <0x140>;
> -+				ngpios = <31>;
> -+				gpio-controller;
> -+				#gpio-cells = <2>;
> -+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32
> 31>;
> -+				interrupt-controller;
> -+				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
> -+					<81 IRQ_TYPE_LEVEL_HIGH>,
> -+					<80 IRQ_TYPE_LEVEL_HIGH>,
> -+					<79 IRQ_TYPE_LEVEL_HIGH>;
> -+				#interrupt-cells = <2>;
> -+				status = "disabled";
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(syscon1): system-controller@400000 {
> -+			compatible = "syscon", "simple-mfd";
> -+			reg = <0x400000 0x1000>;
> -+			#address-cells = <1>;
> -+			#size-cells = <1>;
> -+
> -+			CP11X_LABEL(thermal): thermal-sensor@70 {
> -+				compatible = "marvell,armada-cp110-
> thermal";
> -+				reg = <0x70 0x10>;
> -+				interrupts-extended =
> -+					<&CP11X_LABEL(icu_sei) 116
> IRQ_TYPE_LEVEL_HIGH>;
> -+				#thermal-sensor-cells = <1>;
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(usb3_0): usb3@500000 {
> -+			compatible = "marvell,armada-8k-xhci",
> -+			"generic-xhci";
> -+			reg = <0x500000 0x4000>;
> -+			dma-coherent;
> -+			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 22>,
> -+				 <&CP11X_LABEL(clk) 1 16>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(usb3_1): usb3@510000 {
> -+			compatible = "marvell,armada-8k-xhci",
> -+			"generic-xhci";
> -+			reg = <0x510000 0x4000>;
> -+			dma-coherent;
> -+			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 23>,
> -+				 <&CP11X_LABEL(clk) 1 16>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(sata0): sata@540000 {
> -+			compatible = "marvell,armada-8k-ahci",
> -+			"generic-ahci";
> -+			reg = <0x540000 0x30000>;
> -+			dma-coherent;
> -+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
> -+			clocks = <&CP11X_LABEL(clk) 1 15>,
> -+				 <&CP11X_LABEL(clk) 1 16>;
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			status = "disabled";
> -+
> -+			sata-port@0 {
> -+				reg = <0>;
> -+			};
> -+
> -+			sata-port@1 {
> -+				reg = <1>;
> -+			};
> -+		};
> -+
> -+		CP11X_LABEL(xor0): xor@6a0000 {
> -+			compatible = "marvell,armada-7k-xor", "marvell,xor-
> v2";
> -+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
> -+			dma-coherent;
> -+			msi-parent = <&gic_v2m0>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 8>,
> -+				 <&CP11X_LABEL(clk) 1 14>;
> -+		};
> -+
> -+		CP11X_LABEL(xor1): xor@6c0000 {
> -+			compatible = "marvell,armada-7k-xor", "marvell,xor-
> v2";
> -+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
> -+			dma-coherent;
> -+			msi-parent = <&gic_v2m0>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 7>,
> -+				 <&CP11X_LABEL(clk) 1 14>;
> -+		};
> -+
> -+		CP11X_LABEL(spi0): spi@700600 {
> -+			compatible = "marvell,armada-380-spi";
> -+			reg = <0x700600 0x50>;
> -+			#address-cells = <0x1>;
> -+			#size-cells = <0x0>;
> -+			clock-names = "core", "axi";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(spi1): spi@700680 {
> -+			compatible = "marvell,armada-380-spi";
> -+			reg = <0x700680 0x50>;
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			clock-names = "core", "axi";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(i2c0): i2c@701000 {
> -+			compatible = "marvell,mv78230-i2c";
> -+			reg = <0x701000 0x20>;
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(i2c1): i2c@701100 {
> -+			compatible = "marvell,mv78230-i2c";
> -+			reg = <0x701100 0x20>;
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(uart0): serial@702000 {
> -+			compatible = "snps,dw-apb-uart";
> -+			reg = <0x702000 0x100>;
> -+			reg-shift = <2>;
> -+			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
> -+			reg-io-width = <1>;
> -+			clock-names = "baudclk", "apb_pclk";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(uart1): serial@702100 {
> -+			compatible = "snps,dw-apb-uart";
> -+			reg = <0x702100 0x100>;
> -+			reg-shift = <2>;
> -+			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
> -+			reg-io-width = <1>;
> -+			clock-names = "baudclk", "apb_pclk";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(uart2): serial@702200 {
> -+			compatible = "snps,dw-apb-uart";
> -+			reg = <0x702200 0x100>;
> -+			reg-shift = <2>;
> -+			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
> -+			reg-io-width = <1>;
> -+			clock-names = "baudclk", "apb_pclk";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(uart3): serial@702300 {
> -+			compatible = "snps,dw-apb-uart";
> -+			reg = <0x702300 0x100>;
> -+			reg-shift = <2>;
> -+			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
> -+			reg-io-width = <1>;
> -+			clock-names = "baudclk", "apb_pclk";
> -+			clocks = <&CP11X_LABEL(clk) 1 21>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(nand_controller): nand@720000 {
> -+			/*
> -+			 * Due to the limitation of the pins available
> -+			 * this controller is only usable on the CPM
> -+			 * for A7K and on the CPS for A8K.
> -+			 */
> -+			compatible = "marvell,armada-8k-nand-controller",
> -+				"marvell,armada370-nand-controller";
> -+			reg = <0x720000 0x54>;
> -+			#address-cells = <1>;
> -+			#size-cells = <0>;
> -+			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 2>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			marvell,system-controller =
> <&CP11X_LABEL(syscon0)>;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(trng): trng@760000 {
> -+			compatible = "marvell,armada-8k-rng",
> -+			"inside-secure,safexcel-eip76";
> -+			reg = <0x760000 0x7d>;
> -+			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 25>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			status = "okay";
> -+		};
> -+
> -+		CP11X_LABEL(sdhci0): sdhci@780000 {
> -+			compatible = "marvell,armada-cp110-sdhci";
> -+			reg = <0x780000 0x300>;
> -+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
> -+			clock-names = "core", "axi";
> -+			clocks = <&CP11X_LABEL(clk) 1 4>,
> <&CP11X_LABEL(clk) 1 18>;
> -+			dma-coherent;
> -+			status = "disabled";
> -+		};
> -+
> -+		CP11X_LABEL(crypto): crypto@800000 {
> -+			compatible = "inside-secure,safexcel-eip197b";
> -+			reg = <0x800000 0x200000>;
> -+			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
> -+				<88 IRQ_TYPE_LEVEL_HIGH>,
> -+				<89 IRQ_TYPE_LEVEL_HIGH>,
> -+				<90 IRQ_TYPE_LEVEL_HIGH>,
> -+				<91 IRQ_TYPE_LEVEL_HIGH>,
> -+				<92 IRQ_TYPE_LEVEL_HIGH>;
> -+			interrupt-names = "mem", "ring0", "ring1",
> -+				"ring2", "ring3", "eip";
> -+			clock-names = "core", "reg";
> -+			clocks = <&CP11X_LABEL(clk) 1 26>,
> -+				 <&CP11X_LABEL(clk) 1 17>;
> -+			dma-coherent;
> -+		};
> -+	};
> -+
> -+	CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
> -+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> -+		reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
> -+		      <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
> -+		reg-names = "ctrl", "config";
> -+		#address-cells = <3>;
> -+		#size-cells = <2>;
> -+		#interrupt-cells = <1>;
> -+		device_type = "pci";
> -+		dma-coherent;
> -+		msi-parent = <&gic_v2m0>;
> -+
> -+		bus-range = <0 0xff>;
> -+		ranges =
> -+		/* downstream I/O */
> -+		<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0
> CP11X_PCIEx_IO_BASE(0) 0 0x10000
> -+		/* non-prefetchable memory */
> -+		0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0
> CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
> -+		interrupt-map-mask = <0 0 0 0>;
> -+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22
> IRQ_TYPE_LEVEL_HIGH>;
> -+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
> -+		num-lanes = <1>;
> -+		clock-names = "core", "reg";
> -+		clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1
> 14>;
> -+		status = "disabled";
> -+	};
> -+
> -+	CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
> -+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> -+		reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
> -+		      <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
> -+		reg-names = "ctrl", "config";
> -+		#address-cells = <3>;
> -+		#size-cells = <2>;
> -+		#interrupt-cells = <1>;
> -+		device_type = "pci";
> -+		dma-coherent;
> -+		msi-parent = <&gic_v2m0>;
> -+
> -+		bus-range = <0 0xff>;
> -+		ranges =
> -+		/* downstream I/O */
> -+		<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0
> CP11X_PCIEx_IO_BASE(1) 0 0x10000
> -+		/* non-prefetchable memory */
> -+		0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0
> CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
> -+		interrupt-map-mask = <0 0 0 0>;
> -+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24
> IRQ_TYPE_LEVEL_HIGH>;
> -+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> -+
> -+		num-lanes = <1>;
> -+		clock-names = "core", "reg";
> -+		clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1
> 14>;
> -+		status = "disabled";
> -+	};
> -+
> -+	CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
> -+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
> -+		reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
> -+		      <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
> -+		reg-names = "ctrl", "config";
> -+		#address-cells = <3>;
> -+		#size-cells = <2>;
> -+		#interrupt-cells = <1>;
> -+		device_type = "pci";
> -+		dma-coherent;
> -+		msi-parent = <&gic_v2m0>;
> -+
> -+		bus-range = <0 0xff>;
> -+		ranges =
> -+		/* downstream I/O */
> -+		<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0
> CP11X_PCIEx_IO_BASE(2) 0 0x10000
> -+		/* non-prefetchable memory */
> -+		0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0
> CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
> -+		interrupt-map-mask = <0 0 0 0>;
> -+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23
> IRQ_TYPE_LEVEL_HIGH>;
> -+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
> -+
> -+		num-lanes = <1>;
> -+		clock-names = "core", "reg";
> -+		clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1
> 14>;
> -+		status = "disabled";
> -+	};
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-
> mvneta_update_stats-routine.patch b/target/linux/mvebu/patches-
> 5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
> deleted file mode 100644
> index f6ce6163cf..0000000000
> --- a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-
> mvneta_update_stats-routine.patch
> +++ /dev/null
> @@ -1,95 +0,0 @@
> -From ff519e2acd463bff6c5bb4e8d7ed350c9bae885b Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:21 +0200
> -Subject: [PATCH 1/7] net: mvneta: introduce mvneta_update_stats routine
> -
> -Introduce mvneta_update_stats routine to collect {rx/tx} statistics
> -(packets and bytes). This is a preliminary patch to add XDP support to
> -mvneta driver
> -
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 43 ++++++++++++++-------------
> - 1 file changed, 22 insertions(+), 21 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -1913,6 +1913,23 @@ static void mvneta_rxq_drop_pkts(struct
> - 	}
> - }
> -
> -+static void
> -+mvneta_update_stats(struct mvneta_port *pp, u32 pkts,
> -+		    u32 len, bool tx)
> -+{
> -+	struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
> -+
> -+	u64_stats_update_begin(&stats->syncp);
> -+	if (tx) {
> -+		stats->tx_packets += pkts;
> -+		stats->tx_bytes += len;
> -+	} else {
> -+		stats->rx_packets += pkts;
> -+		stats->rx_bytes += len;
> -+	}
> -+	u64_stats_update_end(&stats->syncp);
> -+}
> -+
> - static inline
> - int mvneta_rx_refill_queue(struct mvneta_port *pp, struct
> mvneta_rx_queue *rxq)
> - {
> -@@ -2093,14 +2110,8 @@ static int mvneta_rx_swbm(struct napi_st
> - 		rxq->left_size = 0;
> - 	}
> -
> --	if (rcvd_pkts) {
> --		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
> --
> --		u64_stats_update_begin(&stats->syncp);
> --		stats->rx_packets += rcvd_pkts;
> --		stats->rx_bytes   += rcvd_bytes;
> --		u64_stats_update_end(&stats->syncp);
> --	}
> -+	if (rcvd_pkts)
> -+		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
> -
> - 	/* return some buffers to hardware queue, one at a time is too slow
> */
> - 	refill = mvneta_rx_refill_queue(pp, rxq);
> -@@ -2223,14 +2234,8 @@ err_drop_frame:
> - 		napi_gro_receive(napi, skb);
> - 	}
> -
> --	if (rcvd_pkts) {
> --		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
> --
> --		u64_stats_update_begin(&stats->syncp);
> --		stats->rx_packets += rcvd_pkts;
> --		stats->rx_bytes   += rcvd_bytes;
> --		u64_stats_update_end(&stats->syncp);
> --	}
> -+	if (rcvd_pkts)
> -+		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
> -
> - 	/* Update rxq management counters */
> - 	mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
> -@@ -2476,7 +2481,6 @@ static netdev_tx_t mvneta_tx(struct sk_b
> -
> - out:
> - 	if (frags > 0) {
> --		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
> - 		struct netdev_queue *nq = netdev_get_tx_queue(dev,
> txq_id);
> -
> - 		netdev_tx_sent_queue(nq, len);
> -@@ -2491,10 +2495,7 @@ out:
> - 		else
> - 			txq->pending += frags;
> -
> --		u64_stats_update_begin(&stats->syncp);
> --		stats->tx_packets++;
> --		stats->tx_bytes  += len;
> --		u64_stats_update_end(&stats->syncp);
> -+		mvneta_update_stats(pp, 1, len, true);
> - 	} else {
> - 		dev->stats.tx_dropped++;
> - 		dev_kfree_skb_any(skb);
> diff --git a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-
> Add-support-for-AP807-AP807-quad.patch b/target/linux/mvebu/patches-
> 5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
> deleted file mode 100644
> index 72b46f51a7..0000000000
> --- a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-
> support-for-AP807-AP807-quad.patch
> +++ /dev/null
> @@ -1,102 +0,0 @@
> -From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:24 +0200
> -Subject: [PATCH] arm64: dts: marvell: Add support for AP807/AP807-quad
> -
> -Describe AP807 and AP807-quad support.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - .../boot/dts/marvell/armada-ap807-quad.dtsi   | 51
> +++++++++++++++++++
> - arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++
> - 2 files changed, 80 insertions(+)
> - create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
> - create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi
> -
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
> -@@ -0,0 +1,51 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Device Tree file for Marvell Armada AP807 Quad
> -+ *
> -+ * Copyright (C) 2019 Marvell Technology Group Ltd.
> -+ */
> -+
> -+#include "armada-ap807.dtsi"
> -+
> -+/ {
> -+	model = "Marvell Armada AP807 Quad";
> -+	compatible = "marvell,armada-ap807-quad", "marvell,armada-
> ap807";
> -+
> -+	cpus {
> -+		#address-cells = <1>;
> -+		#size-cells = <0>;
> -+
> -+		cpu0: cpu@0 {
> -+			device_type = "cpu";
> -+			compatible = "arm,cortex-a72", "arm,armv8";
> -+			reg = <0x000>;
> -+			enable-method = "psci";
> -+			#cooling-cells = <2>;
> -+			clocks = <&cpu_clk 0>;
> -+		};
> -+		cpu1: cpu@1 {
> -+			device_type = "cpu";
> -+			compatible = "arm,cortex-a72", "arm,armv8";
> -+			reg = <0x001>;
> -+			enable-method = "psci";
> -+			#cooling-cells = <2>;
> -+			clocks = <&cpu_clk 0>;
> -+		};
> -+		cpu2: cpu@100 {
> -+			device_type = "cpu";
> -+			compatible = "arm,cortex-a72", "arm,armv8";
> -+			reg = <0x100>;
> -+			enable-method = "psci";
> -+			#cooling-cells = <2>;
> -+			clocks = <&cpu_clk 1>;
> -+		};
> -+		cpu3: cpu@101 {
> -+			device_type = "cpu";
> -+			compatible = "arm,cortex-a72", "arm,armv8";
> -+			reg = <0x101>;
> -+			enable-method = "psci";
> -+			#cooling-cells = <2>;
> -+			clocks = <&cpu_clk 1>;
> -+		};
> -+	};
> -+};
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
> -@@ -0,0 +1,29 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Device Tree file for Marvell Armada AP807
> -+ *
> -+ * Copyright (C) 2019 Marvell Technology Group Ltd.
> -+ */
> -+
> -+#define AP_NAME		ap807
> -+#include "armada-ap80x.dtsi"
> -+
> -+/ {
> -+	model = "Marvell Armada AP807";
> -+	compatible = "marvell,armada-ap807";
> -+};
> -+
> -+&ap_syscon0 {
> -+	ap_clk: clock {
> -+		compatible = "marvell,ap807-clock";
> -+		#clock-cells = <1>;
> -+	};
> -+};
> -+
> -+&ap_syscon1 {
> -+	cpu_clk: clock-cpu {
> -+		compatible = "marvell,ap807-cpu-clock";
> -+		clocks = <&ap_clk 0>, <&ap_clk 1>;
> -+		#clock-cells = <1>;
> -+	};
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-
> page-pool-API-for-sw-buffer-man.patch b/target/linux/mvebu/patches-
> 5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
> deleted file mode 100644
> index fbcae20f74..0000000000
> --- a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-
> API-for-sw-buffer-man.patch
> +++ /dev/null
> @@ -1,181 +0,0 @@
> -From 568a3fa24a95476d40afe3f8616bafb543bc4182 Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:22 +0200
> -Subject: [PATCH 2/7] net: mvneta: introduce page pool API for sw buffer
> - manager
> -
> -Use the page_pool api for allocations and DMA handling instead of
> -__dev_alloc_page()/dma_map_page() and
> free_page()/dma_unmap_page().
> -Pages are unmapped using page_pool_release_page before packets
> -go into the network stack.
> -
> -The page_pool API offers buffer recycling capabilities for XDP but
> -allocates one page per packet, unless the driver splits and manages
> -the allocated page.
> -This is a preliminary patch to add XDP support to mvneta driver
> -
> -Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> -Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/Kconfig  |  1 +
> - drivers/net/ethernet/marvell/mvneta.c | 83 +++++++++++++++++++++----
> --
> - 2 files changed, 65 insertions(+), 19 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/Kconfig
> -+++ b/drivers/net/ethernet/marvell/Kconfig
> -@@ -61,6 +61,7 @@ config MVNETA
> - 	depends on ARCH_MVEBU || COMPILE_TEST
> - 	select MVMDIO
> - 	select PHYLINK
> -+	select PAGE_POOL
> - 	---help---
> - 	  This driver supports the network interface units in the
> - 	  Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -37,6 +37,7 @@
> - #include <net/ip.h>
> - #include <net/ipv6.h>
> - #include <net/tso.h>
> -+#include <net/page_pool.h>
> -
> - /* Registers */
> - #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
> -@@ -607,6 +608,10 @@ struct mvneta_rx_queue {
> - 	u32 pkts_coal;
> - 	u32 time_coal;
> -
> -+	/* page_pool */
> -+	struct page_pool *page_pool;
> -+	struct xdp_rxq_info xdp_rxq;
> -+
> - 	/* Virtual address of the RX buffer */
> - 	void  **buf_virt_addr;
> -
> -@@ -1825,23 +1830,21 @@ static int mvneta_rx_refill(struct mvnet
> - 			    struct mvneta_rx_queue *rxq,
> - 			    gfp_t gfp_mask)
> - {
> -+	enum dma_data_direction dma_dir;
> - 	dma_addr_t phys_addr;
> - 	struct page *page;
> -
> --	page = __dev_alloc_page(gfp_mask);
> -+	page = page_pool_alloc_pages(rxq->page_pool,
> -+				     gfp_mask | __GFP_NOWARN);
> - 	if (!page)
> - 		return -ENOMEM;
> -
> --	/* map page for use */
> --	phys_addr = dma_map_page(pp->dev->dev.parent, page, 0,
> PAGE_SIZE,
> --				 DMA_FROM_DEVICE);
> --	if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr)))
> {
> --		__free_page(page);
> --		return -ENOMEM;
> --	}
> --
> --	phys_addr += pp->rx_offset_correction;
> -+	phys_addr = page_pool_get_dma_addr(page) + pp-
> >rx_offset_correction;
> -+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> -+	dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
> -+				   PAGE_SIZE, dma_dir);
> - 	mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
> -+
> - 	return 0;
> - }
> -
> -@@ -1907,10 +1910,12 @@ static void mvneta_rxq_drop_pkts(struct
> - 		if (!data || !(rx_desc->buf_phys_addr))
> - 			continue;
> -
> --		dma_unmap_page(pp->dev->dev.parent, rx_desc-
> >buf_phys_addr,
> --			       PAGE_SIZE, DMA_FROM_DEVICE);
> --		__free_page(data);
> -+		page_pool_put_page(rxq->page_pool, data, false);
> - 	}
> -+	if (xdp_rxq_info_is_reg(&rxq->xdp_rxq))
> -+		xdp_rxq_info_unreg(&rxq->xdp_rxq);
> -+	page_pool_destroy(rxq->page_pool);
> -+	rxq->page_pool = NULL;
> - }
> -
> - static void
> -@@ -2047,8 +2052,7 @@ static int mvneta_rx_swbm(struct napi_st
> - 				skb_add_rx_frag(rxq->skb, frag_num, page,
> - 						frag_offset, frag_size,
> - 						PAGE_SIZE);
> --				dma_unmap_page(dev->dev.parent,
> phys_addr,
> --					       PAGE_SIZE, DMA_FROM_DEVICE);
> -+				page_pool_release_page(rxq->page_pool,
> page);
> - 				rxq->left_size -= frag_size;
> - 			}
> - 		} else {
> -@@ -2078,9 +2082,7 @@ static int mvneta_rx_swbm(struct napi_st
> - 						frag_offset, frag_size,
> - 						PAGE_SIZE);
> -
> --				dma_unmap_page(dev->dev.parent,
> phys_addr,
> --					       PAGE_SIZE, DMA_FROM_DEVICE);
> --
> -+				page_pool_release_page(rxq->page_pool,
> page);
> - 				rxq->left_size -= frag_size;
> - 			}
> - 		} /* Middle or Last descriptor */
> -@@ -2847,11 +2849,54 @@ static int mvneta_poll(struct napi_struc
> - 	return rx_done;
> - }
> -
> -+static int mvneta_create_page_pool(struct mvneta_port *pp,
> -+				   struct mvneta_rx_queue *rxq, int size)
> -+{
> -+	struct page_pool_params pp_params = {
> -+		.order = 0,
> -+		.flags = PP_FLAG_DMA_MAP,
> -+		.pool_size = size,
> -+		.nid = cpu_to_node(0),
> -+		.dev = pp->dev->dev.parent,
> -+		.dma_dir = DMA_FROM_DEVICE,
> -+	};
> -+	int err;
> -+
> -+	rxq->page_pool = page_pool_create(&pp_params);
> -+	if (IS_ERR(rxq->page_pool)) {
> -+		err = PTR_ERR(rxq->page_pool);
> -+		rxq->page_pool = NULL;
> -+		return err;
> -+	}
> -+
> -+	err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id);
> -+	if (err < 0)
> -+		goto err_free_pp;
> -+
> -+	err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq,
> MEM_TYPE_PAGE_POOL,
> -+					 rxq->page_pool);
> -+	if (err)
> -+		goto err_unregister_rxq;
> -+
> -+	return 0;
> -+
> -+err_unregister_rxq:
> -+	xdp_rxq_info_unreg(&rxq->xdp_rxq);
> -+err_free_pp:
> -+	page_pool_destroy(rxq->page_pool);
> -+	rxq->page_pool = NULL;
> -+	return err;
> -+}
> -+
> - /* Handle rxq fill: allocates rxq skbs; called when initializing a port */
> - static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue
> *rxq,
> - 			   int num)
> - {
> --	int i;
> -+	int i, err;
> -+
> -+	err = mvneta_create_page_pool(pp, rxq, num);
> -+	if (err < 0)
> -+		return err;
> -
> - 	for (i = 0; i < num; i++) {
> - 		memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc));
> diff --git a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-
> Add-AP807-quad-cache-description.patch b/target/linux/mvebu/patches-
> 5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
> deleted file mode 100644
> index 6192f5f202..0000000000
> --- a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-
> AP807-quad-cache-description.patch
> +++ /dev/null
> @@ -1,87 +0,0 @@
> -From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00
> 2001
> -From: Grzegorz Jaszczyk <jaz@semihalf.com>
> -Date: Fri, 4 Oct 2019 16:27:27 +0200
> -Subject: [PATCH] arm64: dts: marvell: Add AP807-quad cache description
> -
> -Adding appropriate entries to device-tree allows the cache description
> -to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/.
> -
> -Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - .../boot/dts/marvell/armada-ap807-quad.dtsi   | 42
> +++++++++++++++++++
> - 1 file changed, 42 insertions(+)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
> -@@ -22,6 +22,13 @@
> - 			enable-method = "psci";
> - 			#cooling-cells = <2>;
> - 			clocks = <&cpu_clk 0>;
> -+			i-cache-size = <0xc000>;
> -+			i-cache-line-size = <64>;
> -+			i-cache-sets = <256>;
> -+			d-cache-size = <0x8000>;
> -+			d-cache-line-size = <64>;
> -+			d-cache-sets = <256>;
> -+			next-level-cache = <&l2_0>;
> - 		};
> - 		cpu1: cpu@1 {
> - 			device_type = "cpu";
> -@@ -30,6 +37,13 @@
> - 			enable-method = "psci";
> - 			#cooling-cells = <2>;
> - 			clocks = <&cpu_clk 0>;
> -+			i-cache-size = <0xc000>;
> -+			i-cache-line-size = <64>;
> -+			i-cache-sets = <256>;
> -+			d-cache-size = <0x8000>;
> -+			d-cache-line-size = <64>;
> -+			d-cache-sets = <256>;
> -+			next-level-cache = <&l2_0>;
> - 		};
> - 		cpu2: cpu@100 {
> - 			device_type = "cpu";
> -@@ -38,6 +52,13 @@
> - 			enable-method = "psci";
> - 			#cooling-cells = <2>;
> - 			clocks = <&cpu_clk 1>;
> -+			i-cache-size = <0xc000>;
> -+			i-cache-line-size = <64>;
> -+			i-cache-sets = <256>;
> -+			d-cache-size = <0x8000>;
> -+			d-cache-line-size = <64>;
> -+			d-cache-sets = <256>;
> -+			next-level-cache = <&l2_1>;
> - 		};
> - 		cpu3: cpu@101 {
> - 			device_type = "cpu";
> -@@ -46,6 +67,27 @@
> - 			enable-method = "psci";
> - 			#cooling-cells = <2>;
> - 			clocks = <&cpu_clk 1>;
> -+			i-cache-size = <0xc000>;
> -+			i-cache-line-size = <64>;
> -+			i-cache-sets = <256>;
> -+			d-cache-size = <0x8000>;
> -+			d-cache-line-size = <64>;
> -+			d-cache-sets = <256>;
> -+			next-level-cache = <&l2_1>;
> -+		};
> -+
> -+		l2_0: l2-cache0 {
> -+			compatible = "cache";
> -+			cache-size = <0x80000>;
> -+			cache-line-size = <64>;
> -+			cache-sets = <512>;
> -+		};
> -+
> -+		l2_1: l2-cache1 {
> -+			compatible = "cache";
> -+			cache-size = <0x80000>;
> -+			cache-line-size = <64>;
> -+			cache-sets = <512>;
> - 		};
> - 	};
> - };
> diff --git a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-
> build_skb-in-mvneta_rx_swbm-poll-.patch b/target/linux/mvebu/patches-
> 5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
> deleted file mode 100644
> index 869b22eefb..0000000000
> --- a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-
> mvneta_rx_swbm-poll-.patch
> +++ /dev/null
> @@ -1,303 +0,0 @@
> -From 8dc9a0888f4c8e27b25e48ff1b4bc2b3a845cc2d Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:23 +0200
> -Subject: [PATCH 3/7] net: mvneta: rely on build_skb in mvneta_rx_swbm
> poll
> - routine
> -
> -Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
> -mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
> -allocate skb since the previous patch introduced buffer recycling using
> -the page_pool API.
> -This patch fixes even an issue in the original driver where dma buffers
> -are accessed before dma sync.
> -mvneta driver can run on not cache coherent devices so it is
> -necessary to sync DMA buffers before sending them to the device
> -in order to avoid memory corruptions. Running perf analysis we can
> -see a performance cost associated with this DMA-sync (anyway it is
> -already there in the original driver code). In follow up patches we
> -will add more logic to reduce DMA-sync as much as possible.
> -
> -Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> -Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 185 +++++++++++++-------------
> - 1 file changed, 95 insertions(+), 90 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -325,6 +325,11 @@
> - 	      ETH_HLEN + ETH_FCS_LEN,			     \
> - 	      cache_line_size())
> -
> -+#define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct
> skb_shared_info) + \
> -+			 NET_SKB_PAD))
> -+#define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) +
> MVNETA_SKB_PAD)
> -+#define MVNETA_MAX_RX_BUF_SIZE	(PAGE_SIZE -
> MVNETA_SKB_PAD)
> -+
> - #define IS_TSO_HEADER(txq, addr) \
> - 	((addr >= txq->tso_hdrs_phys) && \
> - 	 (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
> -@@ -650,7 +655,6 @@ static int txq_number = 8;
> - static int rxq_def;
> -
> - static int rx_copybreak __read_mostly = 256;
> --static int rx_header_size __read_mostly = 128;
> -
> - /* HW BM need that each port be identify by a unique ID */
> - static int global_port_id;
> -@@ -1842,7 +1846,7 @@ static int mvneta_rx_refill(struct mvnet
> - 	phys_addr = page_pool_get_dma_addr(page) + pp-
> >rx_offset_correction;
> - 	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> - 	dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
> --				   PAGE_SIZE, dma_dir);
> -+				   MVNETA_MAX_RX_BUF_SIZE, dma_dir);
> - 	mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
> -
> - 	return 0;
> -@@ -1960,30 +1964,102 @@ int mvneta_rx_refill_queue(struct mvneta
> - 	return i;
> - }
> -
> -+static int
> -+mvneta_swbm_rx_frame(struct mvneta_port *pp,
> -+		     struct mvneta_rx_desc *rx_desc,
> -+		     struct mvneta_rx_queue *rxq,
> -+		     struct page *page)
> -+{
> -+	unsigned char *data = page_address(page);
> -+	int data_len = -MVNETA_MH_SIZE, len;
> -+	struct net_device *dev = pp->dev;
> -+	enum dma_data_direction dma_dir;
> -+
> -+	if (MVNETA_SKB_SIZE(rx_desc->data_size) > PAGE_SIZE) {
> -+		len = MVNETA_MAX_RX_BUF_SIZE;
> -+		data_len += len;
> -+	} else {
> -+		len = rx_desc->data_size;
> -+		data_len += len - ETH_FCS_LEN;
> -+	}
> -+
> -+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> -+	dma_sync_single_for_cpu(dev->dev.parent,
> -+				rx_desc->buf_phys_addr,
> -+				len, dma_dir);
> -+
> -+	rxq->skb = build_skb(data, PAGE_SIZE);
> -+	if (unlikely(!rxq->skb)) {
> -+		netdev_err(dev,
> -+			   "Can't allocate skb on queue %d\n",
> -+			   rxq->id);
> -+		dev->stats.rx_dropped++;
> -+		rxq->skb_alloc_err++;
> -+		return -ENOMEM;
> -+	}
> -+	page_pool_release_page(rxq->page_pool, page);
> -+
> -+	skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
> -+	skb_put(rxq->skb, data_len);
> -+	mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
> -+
> -+	rxq->left_size = rx_desc->data_size - len;
> -+	rx_desc->buf_phys_addr = 0;
> -+
> -+	return 0;
> -+}
> -+
> -+static void
> -+mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
> -+			    struct mvneta_rx_desc *rx_desc,
> -+			    struct mvneta_rx_queue *rxq,
> -+			    struct page *page)
> -+{
> -+	struct net_device *dev = pp->dev;
> -+	enum dma_data_direction dma_dir;
> -+	int data_len, len;
> -+
> -+	if (rxq->left_size > MVNETA_MAX_RX_BUF_SIZE) {
> -+		len = MVNETA_MAX_RX_BUF_SIZE;
> -+		data_len = len;
> -+	} else {
> -+		len = rxq->left_size;
> -+		data_len = len - ETH_FCS_LEN;
> -+	}
> -+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> -+	dma_sync_single_for_cpu(dev->dev.parent,
> -+				rx_desc->buf_phys_addr,
> -+				len, dma_dir);
> -+	if (data_len > 0) {
> -+		/* refill descriptor with new buffer later */
> -+		skb_add_rx_frag(rxq->skb,
> -+				skb_shinfo(rxq->skb)->nr_frags,
> -+				page, NET_SKB_PAD, data_len,
> -+				PAGE_SIZE);
> -+	}
> -+	page_pool_release_page(rxq->page_pool, page);
> -+	rx_desc->buf_phys_addr = 0;
> -+	rxq->left_size -= len;
> -+}
> -+
> - /* Main rx processing when using software buffer management */
> - static int mvneta_rx_swbm(struct napi_struct *napi,
> - 			  struct mvneta_port *pp, int budget,
> - 			  struct mvneta_rx_queue *rxq)
> - {
> -+	int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
> - 	struct net_device *dev = pp->dev;
> --	int rx_todo, rx_proc;
> --	int refill = 0;
> --	u32 rcvd_pkts = 0;
> --	u32 rcvd_bytes = 0;
> -+	int rx_todo, refill;
> -
> - 	/* Get number of received packets */
> - 	rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
> --	rx_proc = 0;
> -
> - 	/* Fairness NAPI loop */
> --	while ((rcvd_pkts < budget) && (rx_proc < rx_todo)) {
> -+	while (rx_proc < budget && rx_proc < rx_todo) {
> - 		struct mvneta_rx_desc *rx_desc =
> mvneta_rxq_next_desc_get(rxq);
> -+		u32 rx_status, index;
> - 		unsigned char *data;
> - 		struct page *page;
> --		dma_addr_t phys_addr;
> --		u32 rx_status, index;
> --		int rx_bytes, skb_size, copy_size;
> --		int frag_num, frag_size, frag_offset;
> -
> - 		index = rx_desc - rxq->descs;
> - 		page = (struct page *)rxq->buf_virt_addr[index];
> -@@ -1991,100 +2067,30 @@ static int mvneta_rx_swbm(struct napi_st
> - 		/* Prefetch header */
> - 		prefetch(data);
> -
> --		phys_addr = rx_desc->buf_phys_addr;
> - 		rx_status = rx_desc->status;
> - 		rx_proc++;
> - 		rxq->refill_num++;
> -
> - 		if (rx_status & MVNETA_RXD_FIRST_DESC) {
> -+			int err;
> -+
> - 			/* Check errors only for FIRST descriptor */
> - 			if (rx_status & MVNETA_RXD_ERR_SUMMARY) {
> - 				mvneta_rx_error(pp, rx_desc);
> - 				/* leave the descriptor untouched */
> - 				continue;
> - 			}
> --			rx_bytes = rx_desc->data_size -
> --				   (ETH_FCS_LEN + MVNETA_MH_SIZE);
> --
> --			/* Allocate small skb for each new packet */
> --			skb_size = max(rx_copybreak, rx_header_size);
> --			rxq->skb = netdev_alloc_skb_ip_align(dev, skb_size);
> --			if (unlikely(!rxq->skb)) {
> --				struct mvneta_pcpu_stats *stats =
> this_cpu_ptr(pp->stats);
> --
> --				netdev_err(dev,
> --					   "Can't allocate skb on queue %d\n",
> --					   rxq->id);
> --
> --				rxq->skb_alloc_err++;
> -
> --				u64_stats_update_begin(&stats->syncp);
> --				stats->rx_dropped++;
> --				u64_stats_update_end(&stats->syncp);
> -+			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq,
> page);
> -+			if (err)
> - 				continue;
> --			}
> --			copy_size = min(skb_size, rx_bytes);
> --
> --			/* Copy data from buffer to SKB, skip Marvell header
> */
> --			memcpy(rxq->skb->data, data + MVNETA_MH_SIZE,
> --			       copy_size);
> --			skb_put(rxq->skb, copy_size);
> --			rxq->left_size = rx_bytes - copy_size;
> --
> --			mvneta_rx_csum(pp, rx_status, rxq->skb);
> --			if (rxq->left_size == 0) {
> --				int size = copy_size + MVNETA_MH_SIZE;
> --
> --				dma_sync_single_range_for_cpu(dev-
> >dev.parent,
> --							      phys_addr, 0,
> --							      size,
> --
> DMA_FROM_DEVICE);
> --
> --				/* leave the descriptor and buffer untouched
> */
> --			} else {
> --				/* refill descriptor with new buffer later */
> --				rx_desc->buf_phys_addr = 0;
> --
> --				frag_num = 0;
> --				frag_offset = copy_size + MVNETA_MH_SIZE;
> --				frag_size = min(rxq->left_size,
> --						(int)(PAGE_SIZE -
> frag_offset));
> --				skb_add_rx_frag(rxq->skb, frag_num, page,
> --						frag_offset, frag_size,
> --						PAGE_SIZE);
> --				page_pool_release_page(rxq->page_pool,
> page);
> --				rxq->left_size -= frag_size;
> --			}
> - 		} else {
> --			/* Middle or Last descriptor */
> - 			if (unlikely(!rxq->skb)) {
> - 				pr_debug("no skb for rx_status 0x%x\n",
> - 					 rx_status);
> - 				continue;
> - 			}
> --			if (!rxq->left_size) {
> --				/* last descriptor has only FCS */
> --				/* and can be discarded */
> --				dma_sync_single_range_for_cpu(dev-
> >dev.parent,
> --							      phys_addr, 0,
> --							      ETH_FCS_LEN,
> --
> DMA_FROM_DEVICE);
> --				/* leave the descriptor and buffer untouched
> */
> --			} else {
> --				/* refill descriptor with new buffer later */
> --				rx_desc->buf_phys_addr = 0;
> --
> --				frag_num = skb_shinfo(rxq->skb)->nr_frags;
> --				frag_offset = 0;
> --				frag_size = min(rxq->left_size,
> --						(int)(PAGE_SIZE -
> frag_offset));
> --				skb_add_rx_frag(rxq->skb, frag_num, page,
> --						frag_offset, frag_size,
> --						PAGE_SIZE);
> --
> --				page_pool_release_page(rxq->page_pool,
> page);
> --				rxq->left_size -= frag_size;
> --			}
> -+			mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq,
> page);
> - 		} /* Middle or Last descriptor */
> -
> - 		if (!(rx_status & MVNETA_RXD_LAST_DESC))
> -@@ -2109,7 +2115,6 @@ static int mvneta_rx_swbm(struct napi_st
> -
> - 		/* clean uncomplete skb pointer in queue */
> - 		rxq->skb = NULL;
> --		rxq->left_size = 0;
> - 	}
> -
> - 	if (rcvd_pkts)
> -@@ -2970,7 +2975,7 @@ static void mvneta_rxq_hw_init(struct mv
> - 		/* Set Offset */
> - 		mvneta_rxq_offset_set(pp, rxq, 0);
> - 		mvneta_rxq_buf_size_set(pp, rxq, PAGE_SIZE < SZ_64K ?
> --					PAGE_SIZE :
> -+					MVNETA_MAX_RX_BUF_SIZE :
> - 					MVNETA_RX_BUF_SIZE(pp-
> >pkt_size));
> - 		mvneta_rxq_bm_disable(pp, rxq);
> - 		mvneta_rxq_fill(pp, rxq, rxq->size);
> -@@ -4713,7 +4718,7 @@ static int mvneta_probe(struct platform_
> - 	SET_NETDEV_DEV(dev, &pdev->dev);
> -
> - 	pp->id = global_port_id++;
> --	pp->rx_offset_correction = 0; /* not relevant for SW BM */
> -+	pp->rx_offset_correction = NET_SKB_PAD;
> -
> - 	/* Obtain access to BM resources if enabled and already initialized */
> - 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
> diff --git a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-
> Drop-PCIe-I-O-ranges-from-CP11x-fi.patch b/target/linux/mvebu/patches-
> 5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
> deleted file mode 100644
> index e06928d130..0000000000
> --- a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-
> PCIe-I-O-ranges-from-CP11x-fi.patch
> +++ /dev/null
> @@ -1,135 +0,0 @@
> -From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:30 +0200
> -Subject: [PATCH] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
> -
> -As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to
> -RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory
> -range. This shows that I/O memory has never been used/working on the
> -old SoCs despite the region being advertised. As PCIe I/O ranges will
> -not be supported in newer SoCs using CP11x co-processors, let's
> -simply drop them. It is not harmful in any case as PCIe device drivers
> -can do it all with the regular mapped memory anyway.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-70x0.dtsi     |  2 --
> - .../boot/dts/marvell/armada-8040-mcbin.dtsi      |  3 +--
> - arch/arm64/boot/dts/marvell/armada-80x0.dtsi     |  4 ----
> - arch/arm64/boot/dts/marvell/armada-cp11x.dtsi    | 16 +++-------------
> - 4 files changed, 4 insertions(+), 21 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -@@ -19,7 +19,6 @@
> -  */
> - #define CP11X_NAME		cp0
> - #define CP11X_BASE		f2000000
> --#define CP11X_PCIE_IO_BASE	0xf9000000
> - #define CP11X_PCIE_MEM_BASE	0xf6000000
> - #define CP11X_PCIE0_BASE	f2600000
> - #define CP11X_PCIE1_BASE	f2620000
> -@@ -29,7 +28,6 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_IO_BASE
> - #undef CP11X_PCIE_MEM_BASE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> ---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> -@@ -179,8 +179,7 @@
> - 	num-lanes = <4>;
> - 	num-viewport = <8>;
> - 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
> --	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
> --		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0
> 0x20000000>;
> -+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0
> 0x20000000>;
> - 	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
> - 	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
> - 	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
> ---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -@@ -21,7 +21,6 @@
> -  */
> - #define CP11X_NAME		cp0
> - #define CP11X_BASE		f2000000
> --#define CP11X_PCIE_IO_BASE	0xf9000000
> - #define CP11X_PCIE_MEM_BASE	0xf6000000
> - #define CP11X_PCIE0_BASE	f2600000
> - #define CP11X_PCIE1_BASE	f2620000
> -@@ -31,7 +30,6 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_IO_BASE
> - #undef CP11X_PCIE_MEM_BASE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> -@@ -42,7 +40,6 @@
> -  */
> - #define CP11X_NAME		cp1
> - #define CP11X_BASE		f4000000
> --#define CP11X_PCIE_IO_BASE	0xfd000000
> - #define CP11X_PCIE_MEM_BASE	0xfa000000
> - #define CP11X_PCIE0_BASE	f4600000
> - #define CP11X_PCIE1_BASE	f4620000
> -@@ -52,7 +49,6 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_IO_BASE
> - #undef CP11X_PCIE_MEM_BASE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> ---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -@@ -10,7 +10,6 @@
> -
> - #include "armada-common.dtsi"
> -
> --#define CP11X_PCIEx_IO_BASE(iface)	(CP11X_PCIE_IO_BASE + (iface
> *  0x10000))
> - #define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE +
> (iface *  0x1000000))
> - #define CP11X_PCIEx_CONF_BASE(iface)
> 	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
> -
> -@@ -507,11 +506,8 @@
> - 		msi-parent = <&gic_v2m0>;
> -
> - 		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0
> CP11X_PCIEx_IO_BASE(0) 0 0x10000
> - 		/* non-prefetchable memory */
> --		0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0
> CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0
> CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
> -@@ -534,11 +530,8 @@
> - 		msi-parent = <&gic_v2m0>;
> -
> - 		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0
> CP11X_PCIEx_IO_BASE(1) 0 0x10000
> - 		/* non-prefetchable memory */
> --		0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0
> CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0
> CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> -@@ -562,11 +555,8 @@
> - 		msi-parent = <&gic_v2m0>;
> -
> - 		bus-range = <0 0xff>;
> --		ranges =
> --		/* downstream I/O */
> --		<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0
> CP11X_PCIEx_IO_BASE(2) 0 0x10000
> - 		/* non-prefetchable memory */
> --		0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0
> CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0
> CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-
> support.patch b/target/linux/mvebu/patches-5.4/006-net-mvneta-add-
> basic-XDP-support.patch
> deleted file mode 100644
> index 33a7a27f43..0000000000
> --- a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-
> support.patch
> +++ /dev/null
> @@ -1,311 +0,0 @@
> -From 0db51da7a8e99f0803ec3a8e25c1a66234a219cb Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:24 +0200
> -Subject: [PATCH 4/7] net: mvneta: add basic XDP support
> -
> -Add basic XDP support to mvneta driver for devices that rely on software
> -buffer management. Currently supported verdicts are:
> -- XDP_DROP
> -- XDP_PASS
> -- XDP_REDIRECT
> -- XDP_ABORTED
> -
> -- iptables drop:
> -$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
> -$nstat -n && sleep 1 && nstat
> -IpInReceives		151169		0.0
> -IpExtInOctets		6953544		0.0
> -IpExtInNoECTPkts	151165		0.0
> -
> -- XDP_DROP via xdp1
> -$./samples/bpf/xdp1 3
> -proto 0:	421419 pkt/s
> -proto 0:	421444 pkt/s
> -proto 0:	421393 pkt/s
> -proto 0:	421440 pkt/s
> -proto 0:	421184 pkt/s
> -
> -Tested-by: Matteo Croce <mcroce@redhat.com>
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 148
> ++++++++++++++++++++++++--
> - 1 file changed, 139 insertions(+), 9 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -38,6 +38,7 @@
> - #include <net/ipv6.h>
> - #include <net/tso.h>
> - #include <net/page_pool.h>
> -+#include <linux/bpf_trace.h>
> -
> - /* Registers */
> - #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
> -@@ -325,8 +326,10 @@
> - 	      ETH_HLEN + ETH_FCS_LEN,			     \
> - 	      cache_line_size())
> -
> -+#define MVNETA_SKB_HEADROOM	(max(XDP_PACKET_HEADROOM,
> NET_SKB_PAD) + \
> -+				 NET_IP_ALIGN)
> - #define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct
> skb_shared_info) + \
> --			 NET_SKB_PAD))
> -+			 MVNETA_SKB_HEADROOM))
> - #define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) +
> MVNETA_SKB_PAD)
> - #define MVNETA_MAX_RX_BUF_SIZE	(PAGE_SIZE -
> MVNETA_SKB_PAD)
> -
> -@@ -354,6 +357,11 @@ struct mvneta_statistic {
> - #define T_REG_64	64
> - #define T_SW		1
> -
> -+#define MVNETA_XDP_PASS		BIT(0)
> -+#define MVNETA_XDP_DROPPED	BIT(1)
> -+#define MVNETA_XDP_TX		BIT(2)
> -+#define MVNETA_XDP_REDIR	BIT(3)
> -+
> - static const struct mvneta_statistic mvneta_statistics[] = {
> - 	{ 0x3000, T_REG_64, "good_octets_received", },
> - 	{ 0x3010, T_REG_32, "good_frames_received", },
> -@@ -435,6 +443,8 @@ struct mvneta_port {
> - 	u32 cause_rx_tx;
> - 	struct napi_struct napi;
> -
> -+	struct bpf_prog *xdp_prog;
> -+
> - 	/* Core clock */
> - 	struct clk *clk;
> - 	/* AXI clock */
> -@@ -1965,10 +1975,50 @@ int mvneta_rx_refill_queue(struct mvneta
> - }
> -
> - static int
> -+mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
> -+	       struct bpf_prog *prog, struct xdp_buff *xdp)
> -+{
> -+	u32 ret, act = bpf_prog_run_xdp(prog, xdp);
> -+
> -+	switch (act) {
> -+	case XDP_PASS:
> -+		ret = MVNETA_XDP_PASS;
> -+		break;
> -+	case XDP_REDIRECT: {
> -+		int err;
> -+
> -+		err = xdp_do_redirect(pp->dev, xdp, prog);
> -+		if (err) {
> -+			ret = MVNETA_XDP_DROPPED;
> -+			xdp_return_buff(xdp);
> -+		} else {
> -+			ret = MVNETA_XDP_REDIR;
> -+		}
> -+		break;
> -+	}
> -+	default:
> -+		bpf_warn_invalid_xdp_action(act);
> -+		/* fall through */
> -+	case XDP_ABORTED:
> -+		trace_xdp_exception(pp->dev, prog, act);
> -+		/* fall through */
> -+	case XDP_DROP:
> -+		page_pool_recycle_direct(rxq->page_pool,
> -+					 virt_to_head_page(xdp->data));
> -+		ret = MVNETA_XDP_DROPPED;
> -+		break;
> -+	}
> -+
> -+	return ret;
> -+}
> -+
> -+static int
> - mvneta_swbm_rx_frame(struct mvneta_port *pp,
> - 		     struct mvneta_rx_desc *rx_desc,
> - 		     struct mvneta_rx_queue *rxq,
> --		     struct page *page)
> -+		     struct xdp_buff *xdp,
> -+		     struct bpf_prog *xdp_prog,
> -+		     struct page *page, u32 *xdp_ret)
> - {
> - 	unsigned char *data = page_address(page);
> - 	int data_len = -MVNETA_MH_SIZE, len;
> -@@ -1988,7 +2038,26 @@ mvneta_swbm_rx_frame(struct mvneta_port
> - 				rx_desc->buf_phys_addr,
> - 				len, dma_dir);
> -
> --	rxq->skb = build_skb(data, PAGE_SIZE);
> -+	xdp->data_hard_start = data;
> -+	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
> -+	xdp->data_end = xdp->data + data_len;
> -+	xdp_set_data_meta_invalid(xdp);
> -+
> -+	if (xdp_prog) {
> -+		u32 ret;
> -+
> -+		ret = mvneta_run_xdp(pp, rxq, xdp_prog, xdp);
> -+		if (ret != MVNETA_XDP_PASS) {
> -+			mvneta_update_stats(pp, 1,
> -+					    xdp->data_end - xdp->data,
> -+					    false);
> -+			rx_desc->buf_phys_addr = 0;
> -+			*xdp_ret |= ret;
> -+			return ret;
> -+		}
> -+	}
> -+
> -+	rxq->skb = build_skb(xdp->data_hard_start, PAGE_SIZE);
> - 	if (unlikely(!rxq->skb)) {
> - 		netdev_err(dev,
> - 			   "Can't allocate skb on queue %d\n",
> -@@ -1999,8 +2068,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
> - 	}
> - 	page_pool_release_page(rxq->page_pool, page);
> -
> --	skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
> --	skb_put(rxq->skb, data_len);
> -+	skb_reserve(rxq->skb,
> -+		    xdp->data - xdp->data_hard_start);
> -+	skb_put(rxq->skb, xdp->data_end - xdp->data);
> - 	mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
> -
> - 	rxq->left_size = rx_desc->data_size - len;
> -@@ -2034,7 +2104,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
> - 		/* refill descriptor with new buffer later */
> - 		skb_add_rx_frag(rxq->skb,
> - 				skb_shinfo(rxq->skb)->nr_frags,
> --				page, NET_SKB_PAD, data_len,
> -+				page, MVNETA_SKB_HEADROOM, data_len,
> - 				PAGE_SIZE);
> - 	}
> - 	page_pool_release_page(rxq->page_pool, page);
> -@@ -2049,11 +2119,18 @@ static int mvneta_rx_swbm(struct napi_st
> - {
> - 	int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
> - 	struct net_device *dev = pp->dev;
> -+	struct bpf_prog *xdp_prog;
> -+	struct xdp_buff xdp_buf;
> - 	int rx_todo, refill;
> -+	u32 xdp_ret = 0;
> -
> - 	/* Get number of received packets */
> - 	rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
> -
> -+	rcu_read_lock();
> -+	xdp_prog = READ_ONCE(pp->xdp_prog);
> -+	xdp_buf.rxq = &rxq->xdp_rxq;
> -+
> - 	/* Fairness NAPI loop */
> - 	while (rx_proc < budget && rx_proc < rx_todo) {
> - 		struct mvneta_rx_desc *rx_desc =
> mvneta_rxq_next_desc_get(rxq);
> -@@ -2081,7 +2158,8 @@ static int mvneta_rx_swbm(struct napi_st
> - 				continue;
> - 			}
> -
> --			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq,
> page);
> -+			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq,
> &xdp_buf,
> -+						   xdp_prog, page, &xdp_ret);
> - 			if (err)
> - 				continue;
> - 		} else {
> -@@ -2116,6 +2194,10 @@ static int mvneta_rx_swbm(struct napi_st
> - 		/* clean uncomplete skb pointer in queue */
> - 		rxq->skb = NULL;
> - 	}
> -+	rcu_read_unlock();
> -+
> -+	if (xdp_ret & MVNETA_XDP_REDIR)
> -+		xdp_do_flush_map();
> -
> - 	if (rcvd_pkts)
> - 		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
> -@@ -2857,13 +2939,14 @@ static int mvneta_poll(struct napi_struc
> - static int mvneta_create_page_pool(struct mvneta_port *pp,
> - 				   struct mvneta_rx_queue *rxq, int size)
> - {
> -+	struct bpf_prog *xdp_prog = READ_ONCE(pp->xdp_prog);
> - 	struct page_pool_params pp_params = {
> - 		.order = 0,
> - 		.flags = PP_FLAG_DMA_MAP,
> - 		.pool_size = size,
> - 		.nid = cpu_to_node(0),
> - 		.dev = pp->dev->dev.parent,
> --		.dma_dir = DMA_FROM_DEVICE,
> -+		.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL :
> DMA_FROM_DEVICE,
> - 	};
> - 	int err;
> -
> -@@ -3366,6 +3449,11 @@ static int mvneta_change_mtu(struct net_
> - 		mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
> - 	}
> -
> -+	if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) {
> -+		netdev_info(dev, "Illegal MTU value %d for XDP mode\n",
> mtu);
> -+		return -EINVAL;
> -+	}
> -+
> - 	dev->mtu = mtu;
> -
> - 	if (!netif_running(dev)) {
> -@@ -4036,6 +4124,47 @@ static int mvneta_ioctl(struct net_devic
> - 	return phylink_mii_ioctl(pp->phylink, ifr, cmd);
> - }
> -
> -+static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog
> *prog,
> -+			    struct netlink_ext_ack *extack)
> -+{
> -+	bool need_update, running = netif_running(dev);
> -+	struct mvneta_port *pp = netdev_priv(dev);
> -+	struct bpf_prog *old_prog;
> -+
> -+	if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
> -+		NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not
> supported on XDP");
> -+		return -EOPNOTSUPP;
> -+	}
> -+
> -+	need_update = !!pp->xdp_prog != !!prog;
> -+	if (running && need_update)
> -+		mvneta_stop(dev);
> -+
> -+	old_prog = xchg(&pp->xdp_prog, prog);
> -+	if (old_prog)
> -+		bpf_prog_put(old_prog);
> -+
> -+	if (running && need_update)
> -+		return mvneta_open(dev);
> -+
> -+	return 0;
> -+}
> -+
> -+static int mvneta_xdp(struct net_device *dev, struct netdev_bpf *xdp)
> -+{
> -+	struct mvneta_port *pp = netdev_priv(dev);
> -+
> -+	switch (xdp->command) {
> -+	case XDP_SETUP_PROG:
> -+		return mvneta_xdp_setup(dev, xdp->prog, xdp->extack);
> -+	case XDP_QUERY_PROG:
> -+		xdp->prog_id = pp->xdp_prog ? pp->xdp_prog->aux->id : 0;
> -+		return 0;
> -+	default:
> -+		return -EINVAL;
> -+	}
> -+}
> -+
> - /* Ethtool methods */
> -
> - /* Set link ksettings (phy address, speed) for ethtools */
> -@@ -4432,6 +4561,7 @@ static const struct net_device_ops mvnet
> - 	.ndo_fix_features    = mvneta_fix_features,
> - 	.ndo_get_stats64     = mvneta_get_stats64,
> - 	.ndo_do_ioctl        = mvneta_ioctl,
> -+	.ndo_bpf             = mvneta_xdp,
> - };
> -
> - static const struct ethtool_ops mvneta_eth_tool_ops = {
> -@@ -4718,7 +4848,7 @@ static int mvneta_probe(struct platform_
> - 	SET_NETDEV_DEV(dev, &pdev->dev);
> -
> - 	pp->id = global_port_id++;
> --	pp->rx_offset_correction = NET_SKB_PAD;
> -+	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
> -
> - 	/* Obtain access to BM resources if enabled and already initialized */
> - 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
> diff --git a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-
> Externalize-PCIe-macros-from-CP11x.patch b/target/linux/mvebu/patches-
> 5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
> deleted file mode 100644
> index 0dd9e8f90f..0000000000
> --- a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-
> Externalize-PCIe-macros-from-CP11x.patch
> +++ /dev/null
> @@ -1,129 +0,0 @@
> -From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:31 +0200
> -Subject: [PATCH] arm64: dts: marvell: Externalize PCIe macros from CP11x
> file
> -
> -PCIe macros are specific to CP110 and will not fit CP115
> -constraints. To keep the same way the files are organized, just move
> -some macros out of the CP11x generic file and define them directly in
> -SoC DTSI, instead of defining single addresses in the SoC DTSI and
> -reusing them in macros.
> -
> -In the end:
> -* CP11X_PCIE_MEM_BASE SoC define is dropped
> -* CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the
> -  SoC files as it replaces the above definition.
> -* As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with
> -  newer SoCs, we put it in the SoC files as well.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |  6 ++++--
> - arch/arm64/boot/dts/marvell/armada-80x0.dtsi  | 12 ++++++++----
> - arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  9 ++++-----
> - 3 files changed, 16 insertions(+), 11 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> -@@ -19,7 +19,8 @@
> -  */
> - #define CP11X_NAME		cp0
> - #define CP11X_BASE		f2000000
> --#define CP11X_PCIE_MEM_BASE	0xf6000000
> -+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface *
> 0x1000000))
> -+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
> - #define CP11X_PCIE0_BASE	f2600000
> - #define CP11X_PCIE1_BASE	f2620000
> - #define CP11X_PCIE2_BASE	f2640000
> -@@ -28,7 +29,8 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_SIZE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> - #undef CP11X_PCIE2_BASE
> ---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> -@@ -21,7 +21,8 @@
> -  */
> - #define CP11X_NAME		cp0
> - #define CP11X_BASE		f2000000
> --#define CP11X_PCIE_MEM_BASE	0xf6000000
> -+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface *
> 0x1000000))
> -+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
> - #define CP11X_PCIE0_BASE	f2600000
> - #define CP11X_PCIE1_BASE	f2620000
> - #define CP11X_PCIE2_BASE	f2640000
> -@@ -30,7 +31,8 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_SIZE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> - #undef CP11X_PCIE2_BASE
> -@@ -40,7 +42,8 @@
> -  */
> - #define CP11X_NAME		cp1
> - #define CP11X_BASE		f4000000
> --#define CP11X_PCIE_MEM_BASE	0xfa000000
> -+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface *
> 0x1000000))
> -+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
> - #define CP11X_PCIE0_BASE	f4600000
> - #define CP11X_PCIE1_BASE	f4620000
> - #define CP11X_PCIE2_BASE	f4640000
> -@@ -49,7 +52,8 @@
> -
> - #undef CP11X_NAME
> - #undef CP11X_BASE
> --#undef CP11X_PCIE_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_BASE
> -+#undef CP11X_PCIEx_MEM_SIZE
> - #undef CP11X_PCIE0_BASE
> - #undef CP11X_PCIE1_BASE
> - #undef CP11X_PCIE2_BASE
> ---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> -@@ -10,8 +10,7 @@
> -
> - #include "armada-common.dtsi"
> -
> --#define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE +
> (iface *  0x1000000))
> --#define CP11X_PCIEx_CONF_BASE(iface)
> 	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
> -+#define CP11X_PCIEx_CONF_BASE(iface)
> 	(CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
> -
> - / {
> - 	/*
> -@@ -507,7 +506,7 @@
> -
> - 		bus-range = <0 0xff>;
> - 		/* non-prefetchable memory */
> --		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0
> CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0
> CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
> -@@ -531,7 +530,7 @@
> -
> - 		bus-range = <0 0xff>;
> - 		/* non-prefetchable memory */
> --		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0
> CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0
> CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> -@@ -556,7 +555,7 @@
> -
> - 		bus-range = <0 0xff>;
> - 		/* non-prefetchable memory */
> --		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0
> CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
> -+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0
> CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
> - 		interrupt-map-mask = <0 0 0 0>;
> - 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23
> IRQ_TYPE_LEVEL_HIGH>;
> - 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-
> avoid_error_message_for_optional_IRQ.patch
> b/target/linux/mvebu/patches-5.4/007-gpio-mvebu-
> avoid_error_message_for_optional_IRQ.patch
> deleted file mode 100644
> index 00d2b30d58..0000000000
> --- a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-
> avoid_error_message_for_optional_IRQ.patch
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -From 525b0858ff2fdb78defec2d4d6d63baaa423d5fd Mon Sep 17 00:00:00
> 2001
> -From: Chris Packham <chris.packham@alliedtelesis.co.nz>
> -Date: Fri, 13 Mar 2020 16:42:44 +1300
> -Subject: [PATCH] gpio: mvebu: avoid error message for optional IRQ
> -
> -platform_get_irq() will generate an error message if the requested irq
> -is not present
> -
> -  mvebu-gpio f1010140.gpio: IRQ index 3 not found
> -
> -use platform_get_irq_optional() to avoid the error message being
> -generated.
> -
> -Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> -Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> -Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ----
> - drivers/gpio/gpio-mvebu.c | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> ---- a/drivers/gpio/gpio-mvebu.c
> -+++ b/drivers/gpio/gpio-mvebu.c
> -@@ -1248,7 +1248,7 @@ static int mvebu_gpio_probe(struct platf
> - 	 * pins.
> - 	 */
> - 	for (i = 0; i < 4; i++) {
> --		int irq = platform_get_irq(pdev, i);
> -+		int irq = platform_get_irq_optional(pdev, i);
> -
> - 		if (irq < 0)
> - 			continue;
> diff --git a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-
> prefetch-in-mvneta_swbm_rx_fr.patch b/target/linux/mvebu/patches-
> 5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
> deleted file mode 100644
> index e075796e41..0000000000
> --- a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-
> prefetch-in-mvneta_swbm_rx_fr.patch
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -From fa383f6b77a2ed788266fa8fbfb659aa284d2f58 Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:25 +0200
> -Subject: [PATCH 5/7] net: mvneta: move header prefetch in
> mvneta_swbm_rx_frame
> -
> -Move data buffer prefetch in mvneta_swbm_rx_frame after
> -dma_sync_single_range_for_cpu
> -
> -Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> -Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 7 +++----
> - 1 file changed, 3 insertions(+), 4 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -2038,6 +2038,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
> - 				rx_desc->buf_phys_addr,
> - 				len, dma_dir);
> -
> -+	/* Prefetch header */
> -+	prefetch(data);
> -+
> - 	xdp->data_hard_start = data;
> - 	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
> - 	xdp->data_end = xdp->data + data_len;
> -@@ -2135,14 +2138,10 @@ static int mvneta_rx_swbm(struct napi_st
> - 	while (rx_proc < budget && rx_proc < rx_todo) {
> - 		struct mvneta_rx_desc *rx_desc =
> mvneta_rxq_next_desc_get(rxq);
> - 		u32 rx_status, index;
> --		unsigned char *data;
> - 		struct page *page;
> -
> - 		index = rx_desc - rxq->descs;
> - 		page = (struct page *)rxq->buf_virt_addr[index];
> --		data = page_address(page);
> --		/* Prefetch header */
> --		prefetch(data);
> -
> - 		rx_status = rx_desc->status;
> - 		rx_proc++;
> diff --git a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-
> Enumerate-the-first-AP806-syscon.patch b/target/linux/mvebu/patches-
> 5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
> deleted file mode 100644
> index c191b3f7df..0000000000
> --- a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-
> Enumerate-the-first-AP806-syscon.patch
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:18 +0200
> -Subject: [PATCH] arm64: dts: marvell: Enumerate the first AP806 syscon
> -
> -There are two system controllers in the AP80x, like for ap_syscon1,
> -enumerate the first one by renaming it s/ap_syscon/ap_syscon0/.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -@@ -246,7 +246,7 @@
> - 				status = "disabled";
> - 			};
> -
> --			ap_syscon: system-controller@6f4000 {
> -+			ap_syscon0: system-controller@6f4000 {
> - 				compatible = "syscon", "simple-mfd";
> - 				reg = <0x6f4000 0x2000>;
> -
> diff --git a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-
> buffer-array-agnostic.patch b/target/linux/mvebu/patches-5.4/008-net-
> mvneta-make-tx-buffer-array-agnostic.patch
> deleted file mode 100644
> index 4698c23be4..0000000000
> --- a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-
> array-agnostic.patch
> +++ /dev/null
> @@ -1,210 +0,0 @@
> -From 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:26 +0200
> -Subject: [PATCH 6/7] net: mvneta: make tx buffer array agnostic
> -
> -Allow tx buffer array to contain both skb and xdp buffers in order to
> -enable xdp frame recycling adding XDP_TX verdict support
> -
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++----------
> - 1 file changed, 43 insertions(+), 23 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -565,6 +565,20 @@ struct mvneta_rx_desc {
> - };
> - #endif
> -
> -+enum mvneta_tx_buf_type {
> -+	MVNETA_TYPE_SKB,
> -+	MVNETA_TYPE_XDP_TX,
> -+	MVNETA_TYPE_XDP_NDO,
> -+};
> -+
> -+struct mvneta_tx_buf {
> -+	enum mvneta_tx_buf_type type;
> -+	union {
> -+		struct xdp_frame *xdpf;
> -+		struct sk_buff *skb;
> -+	};
> -+};
> -+
> - struct mvneta_tx_queue {
> - 	/* Number of this TX queue, in the range 0-7 */
> - 	u8 id;
> -@@ -580,8 +594,8 @@ struct mvneta_tx_queue {
> - 	int tx_stop_threshold;
> - 	int tx_wake_threshold;
> -
> --	/* Array of transmitted skb */
> --	struct sk_buff **tx_skb;
> -+	/* Array of transmitted buffers */
> -+	struct mvneta_tx_buf *buf;
> -
> - 	/* Index of last TX DMA descriptor that was inserted */
> - 	int txq_put_index;
> -@@ -1793,14 +1807,9 @@ static void mvneta_txq_bufs_free(struct
> - 	int i;
> -
> - 	for (i = 0; i < num; i++) {
> -+		struct mvneta_tx_buf *buf = &txq->buf[txq-
> >txq_get_index];
> - 		struct mvneta_tx_desc *tx_desc = txq->descs +
> - 			txq->txq_get_index;
> --		struct sk_buff *skb = txq->tx_skb[txq->txq_get_index];
> --
> --		if (skb) {
> --			bytes_compl += skb->len;
> --			pkts_compl++;
> --		}
> -
> - 		mvneta_txq_inc_get(txq);
> -
> -@@ -1808,9 +1817,12 @@ static void mvneta_txq_bufs_free(struct
> - 			dma_unmap_single(pp->dev->dev.parent,
> - 					 tx_desc->buf_phys_addr,
> - 					 tx_desc->data_size,
> DMA_TO_DEVICE);
> --		if (!skb)
> -+		if (!buf->skb)
> - 			continue;
> --		dev_kfree_skb_any(skb);
> -+
> -+		bytes_compl += buf->skb->len;
> -+		pkts_compl++;
> -+		dev_kfree_skb_any(buf->skb);
> - 	}
> -
> - 	netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
> -@@ -2335,16 +2347,19 @@ static inline void
> - mvneta_tso_put_hdr(struct sk_buff *skb,
> - 		   struct mvneta_port *pp, struct mvneta_tx_queue *txq)
> - {
> --	struct mvneta_tx_desc *tx_desc;
> - 	int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
> -+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
> -+	struct mvneta_tx_desc *tx_desc;
> -
> --	txq->tx_skb[txq->txq_put_index] = NULL;
> - 	tx_desc = mvneta_txq_next_desc_get(txq);
> - 	tx_desc->data_size = hdr_len;
> - 	tx_desc->command = mvneta_skb_tx_csum(pp, skb);
> - 	tx_desc->command |= MVNETA_TXD_F_DESC;
> - 	tx_desc->buf_phys_addr = txq->tso_hdrs_phys +
> - 				 txq->txq_put_index * TSO_HEADER_SIZE;
> -+	buf->type = MVNETA_TYPE_SKB;
> -+	buf->skb = NULL;
> -+
> - 	mvneta_txq_inc_put(txq);
> - }
> -
> -@@ -2353,6 +2368,7 @@ mvneta_tso_put_data(struct net_device *d
> - 		    struct sk_buff *skb, char *data, int size,
> - 		    bool last_tcp, bool is_last)
> - {
> -+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
> - 	struct mvneta_tx_desc *tx_desc;
> -
> - 	tx_desc = mvneta_txq_next_desc_get(txq);
> -@@ -2366,7 +2382,8 @@ mvneta_tso_put_data(struct net_device *d
> - 	}
> -
> - 	tx_desc->command = 0;
> --	txq->tx_skb[txq->txq_put_index] = NULL;
> -+	buf->type = MVNETA_TYPE_SKB;
> -+	buf->skb = NULL;
> -
> - 	if (last_tcp) {
> - 		/* last descriptor in the TCP packet */
> -@@ -2374,7 +2391,7 @@ mvneta_tso_put_data(struct net_device *d
> -
> - 		/* last descriptor in SKB */
> - 		if (is_last)
> --			txq->tx_skb[txq->txq_put_index] = skb;
> -+			buf->skb = skb;
> - 	}
> - 	mvneta_txq_inc_put(txq);
> - 	return 0;
> -@@ -2459,6 +2476,7 @@ static int mvneta_tx_frag_process(struct
> - 	int i, nr_frags = skb_shinfo(skb)->nr_frags;
> -
> - 	for (i = 0; i < nr_frags; i++) {
> -+		struct mvneta_tx_buf *buf = &txq->buf[txq-
> >txq_put_index];
> - 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
> - 		void *addr = skb_frag_address(frag);
> -
> -@@ -2478,12 +2496,13 @@ static int mvneta_tx_frag_process(struct
> - 		if (i == nr_frags - 1) {
> - 			/* Last descriptor */
> - 			tx_desc->command = MVNETA_TXD_L_DESC |
> MVNETA_TXD_Z_PAD;
> --			txq->tx_skb[txq->txq_put_index] = skb;
> -+			buf->skb = skb;
> - 		} else {
> - 			/* Descriptor in the middle: Not First, Not Last */
> - 			tx_desc->command = 0;
> --			txq->tx_skb[txq->txq_put_index] = NULL;
> -+			buf->skb = NULL;
> - 		}
> -+		buf->type = MVNETA_TYPE_SKB;
> - 		mvneta_txq_inc_put(txq);
> - 	}
> -
> -@@ -2511,6 +2530,7 @@ static netdev_tx_t mvneta_tx(struct sk_b
> - 	struct mvneta_port *pp = netdev_priv(dev);
> - 	u16 txq_id = skb_get_queue_mapping(skb);
> - 	struct mvneta_tx_queue *txq = &pp->txqs[txq_id];
> -+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
> - 	struct mvneta_tx_desc *tx_desc;
> - 	int len = skb->len;
> - 	int frags = 0;
> -@@ -2543,16 +2563,17 @@ static netdev_tx_t mvneta_tx(struct sk_b
> - 		goto out;
> - 	}
> -
> -+	buf->type = MVNETA_TYPE_SKB;
> - 	if (frags == 1) {
> - 		/* First and Last descriptor */
> - 		tx_cmd |= MVNETA_TXD_FLZ_DESC;
> - 		tx_desc->command = tx_cmd;
> --		txq->tx_skb[txq->txq_put_index] = skb;
> -+		buf->skb = skb;
> - 		mvneta_txq_inc_put(txq);
> - 	} else {
> - 		/* First but not Last */
> - 		tx_cmd |= MVNETA_TXD_F_DESC;
> --		txq->tx_skb[txq->txq_put_index] = NULL;
> -+		buf->skb = NULL;
> - 		mvneta_txq_inc_put(txq);
> - 		tx_desc->command = tx_cmd;
> - 		/* Continue with other skb fragments */
> -@@ -3138,9 +3159,8 @@ static int mvneta_txq_sw_init(struct mvn
> -
> - 	txq->last_desc = txq->size - 1;
> -
> --	txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb),
> --				    GFP_KERNEL);
> --	if (!txq->tx_skb) {
> -+	txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf),
> GFP_KERNEL);
> -+	if (!txq->buf) {
> - 		dma_free_coherent(pp->dev->dev.parent,
> - 				  txq->size * MVNETA_DESC_ALIGNED_SIZE,
> - 				  txq->descs, txq->descs_phys);
> -@@ -3152,7 +3172,7 @@ static int mvneta_txq_sw_init(struct mvn
> - 					   txq->size * TSO_HEADER_SIZE,
> - 					   &txq->tso_hdrs_phys,
> GFP_KERNEL);
> - 	if (!txq->tso_hdrs) {
> --		kfree(txq->tx_skb);
> -+		kfree(txq->buf);
> - 		dma_free_coherent(pp->dev->dev.parent,
> - 				  txq->size * MVNETA_DESC_ALIGNED_SIZE,
> - 				  txq->descs, txq->descs_phys);
> -@@ -3207,7 +3227,7 @@ static void mvneta_txq_sw_deinit(struct
> - {
> - 	struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq-
> >id);
> -
> --	kfree(txq->tx_skb);
> -+	kfree(txq->buf);
> -
> - 	if (txq->tso_hdrs)
> - 		dma_free_coherent(pp->dev->dev.parent,
> diff --git a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-
> Prepare-the-introduction-of-AP807-.patch b/target/linux/mvebu/patches-
> 5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
> deleted file mode 100644
> index bb7863cb5f..0000000000
> --- a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-
> the-introduction-of-AP807-.patch
> +++ /dev/null
> @@ -1,937 +0,0 @@
> -From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00
> 2001
> -From: Konstantin Porotchkin <kostap@marvell.com>
> -Date: Fri, 4 Oct 2019 16:27:22 +0200
> -Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807
> based
> - SoCs
> -
> -Prepare the support for Marvell AP807 die. This die is very similar to
> -AP806 but uses different DDR PHY. AP807 is a major component of CN9130
> -SoC series.
> -
> -Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +----------------
> - arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456
> ++++++++++++++++++
> - 2 files changed, 458 insertions(+), 446 deletions(-)
> - create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -@@ -5,454 +5,10 @@
> -  * Device Tree file for Marvell Armada AP806.
> -  */
> -
> --#include <dt-bindings/interrupt-controller/arm-gic.h>
> --#include <dt-bindings/thermal/thermal.h>
> --
> --/dts-v1/;
> -+#define AP_NAME		ap806
> -+#include "armada-ap80x.dtsi"
> -
> - / {
> - 	model = "Marvell Armada AP806";
> - 	compatible = "marvell,armada-ap806";
> --	#address-cells = <2>;
> --	#size-cells = <2>;
> --
> --	aliases {
> --		serial0 = &uart0;
> --		serial1 = &uart1;
> --		gpio0 = &ap_gpio;
> --		spi0 = &spi0;
> --	};
> --
> --	psci {
> --		compatible = "arm,psci-0.2";
> --		method = "smc";
> --	};
> --
> --	reserved-memory {
> --		#address-cells = <2>;
> --		#size-cells = <2>;
> --		ranges;
> --
> --		/*
> --		 * This area matches the mapping done with a
> --		 * mainline U-Boot, and should be updated by the
> --		 * bootloader.
> --		 */
> --
> --		psci-area@4000000 {
> --			reg = <0x0 0x4000000 0x0 0x200000>;
> --			no-map;
> --		};
> --	};
> --
> --	ap806 {
> --		#address-cells = <2>;
> --		#size-cells = <2>;
> --		compatible = "simple-bus";
> --		interrupt-parent = <&gic>;
> --		ranges;
> --
> --		config-space@f0000000 {
> --			#address-cells = <1>;
> --			#size-cells = <1>;
> --			compatible = "simple-bus";
> --			ranges = <0x0 0x0 0xf0000000 0x1000000>;
> --
> --			gic: interrupt-controller@210000 {
> --				compatible = "arm,gic-400";
> --				#interrupt-cells = <3>;
> --				#address-cells = <1>;
> --				#size-cells = <1>;
> --				ranges;
> --				interrupt-controller;
> --				interrupts = <GIC_PPI 9
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> --				reg = <0x210000 0x10000>,
> --				      <0x220000 0x20000>,
> --				      <0x240000 0x20000>,
> --				      <0x260000 0x20000>;
> --
> --				gic_v2m0: v2m@280000 {
> --					compatible = "arm,gic-v2m-frame";
> --					msi-controller;
> --					reg = <0x280000 0x1000>;
> --					arm,msi-base-spi = <160>;
> --					arm,msi-num-spis = <32>;
> --				};
> --				gic_v2m1: v2m@290000 {
> --					compatible = "arm,gic-v2m-frame";
> --					msi-controller;
> --					reg = <0x290000 0x1000>;
> --					arm,msi-base-spi = <192>;
> --					arm,msi-num-spis = <32>;
> --				};
> --				gic_v2m2: v2m@2a0000 {
> --					compatible = "arm,gic-v2m-frame";
> --					msi-controller;
> --					reg = <0x2a0000 0x1000>;
> --					arm,msi-base-spi = <224>;
> --					arm,msi-num-spis = <32>;
> --				};
> --				gic_v2m3: v2m@2b0000 {
> --					compatible = "arm,gic-v2m-frame";
> --					msi-controller;
> --					reg = <0x2b0000 0x1000>;
> --					arm,msi-base-spi = <256>;
> --					arm,msi-num-spis = <32>;
> --				};
> --			};
> --
> --			timer {
> --				compatible = "arm,armv8-timer";
> --				interrupts = <GIC_PPI 13
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> --					     <GIC_PPI 14
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> --					     <GIC_PPI 11
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> --					     <GIC_PPI 10
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> --			};
> --
> --			pmu {
> --				compatible = "arm,cortex-a72-pmu";
> --				interrupt-parent = <&pic>;
> --				interrupts = <17>;
> --			};
> --
> --			odmi: odmi@300000 {
> --				compatible = "marvell,odmi-controller";
> --				interrupt-controller;
> --				msi-controller;
> --				marvell,odmi-frames = <4>;
> --				reg = <0x300000 0x4000>,
> --				      <0x304000 0x4000>,
> --				      <0x308000 0x4000>,
> --				      <0x30C000 0x4000>;
> --				marvell,spi-base = <128>, <136>, <144>,
> <152>;
> --			};
> --
> --			gicp: gicp@3f0040 {
> --				compatible = "marvell,ap806-gicp";
> --				reg = <0x3f0040 0x10>;
> --				marvell,spi-ranges = <64 64>, <288 64>;
> --				msi-controller;
> --			};
> --
> --			pic: interrupt-controller@3f0100 {
> --				compatible = "marvell,armada-8k-pic";
> --				reg = <0x3f0100 0x10>;
> --				#interrupt-cells = <1>;
> --				interrupt-controller;
> --				interrupts = <GIC_PPI 15
> IRQ_TYPE_LEVEL_HIGH>;
> --			};
> --
> --			sei: interrupt-controller@3f0200 {
> --				compatible = "marvell,ap806-sei";
> --				reg = <0x3f0200 0x40>;
> --				interrupts = <GIC_SPI 0
> IRQ_TYPE_LEVEL_HIGH>;
> --				#interrupt-cells = <1>;
> --				interrupt-controller;
> --				msi-controller;
> --			};
> --
> --			xor@400000 {
> --				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> --				reg = <0x400000 0x1000>,
> --				      <0x410000 0x1000>;
> --				msi-parent = <&gic_v2m0>;
> --				clocks = <&ap_clk 3>;
> --				dma-coherent;
> --			};
> --
> --			xor@420000 {
> --				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> --				reg = <0x420000 0x1000>,
> --				      <0x430000 0x1000>;
> --				msi-parent = <&gic_v2m0>;
> --				clocks = <&ap_clk 3>;
> --				dma-coherent;
> --			};
> --
> --			xor@440000 {
> --				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> --				reg = <0x440000 0x1000>,
> --				      <0x450000 0x1000>;
> --				msi-parent = <&gic_v2m0>;
> --				clocks = <&ap_clk 3>;
> --				dma-coherent;
> --			};
> --
> --			xor@460000 {
> --				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> --				reg = <0x460000 0x1000>,
> --				      <0x470000 0x1000>;
> --				msi-parent = <&gic_v2m0>;
> --				clocks = <&ap_clk 3>;
> --				dma-coherent;
> --			};
> --
> --			spi0: spi@510600 {
> --				compatible = "marvell,armada-380-spi";
> --				reg = <0x510600 0x50>;
> --				#address-cells = <1>;
> --				#size-cells = <0>;
> --				interrupts = <GIC_SPI 21
> IRQ_TYPE_LEVEL_HIGH>;
> --				clocks = <&ap_clk 3>;
> --				status = "disabled";
> --			};
> --
> --			i2c0: i2c@511000 {
> --				compatible = "marvell,mv78230-i2c";
> --				reg = <0x511000 0x20>;
> --				#address-cells = <1>;
> --				#size-cells = <0>;
> --				interrupts = <GIC_SPI 20
> IRQ_TYPE_LEVEL_HIGH>;
> --				timeout-ms = <1000>;
> --				clocks = <&ap_clk 3>;
> --				status = "disabled";
> --			};
> --
> --			uart0: serial@512000 {
> --				compatible = "snps,dw-apb-uart";
> --				reg = <0x512000 0x100>;
> --				reg-shift = <2>;
> --				interrupts = <GIC_SPI 19
> IRQ_TYPE_LEVEL_HIGH>;
> --				reg-io-width = <1>;
> --				clocks = <&ap_clk 3>;
> --				status = "disabled";
> --			};
> --
> --			uart1: serial@512100 {
> --				compatible = "snps,dw-apb-uart";
> --				reg = <0x512100 0x100>;
> --				reg-shift = <2>;
> --				interrupts = <GIC_SPI 29
> IRQ_TYPE_LEVEL_HIGH>;
> --				reg-io-width = <1>;
> --				clocks = <&ap_clk 3>;
> --				status = "disabled";
> --
> --			};
> --
> --			watchdog: watchdog@610000 {
> --				compatible = "arm,sbsa-gwdt";
> --				reg = <0x610000 0x1000>, <0x600000 0x1000>;
> --				interrupts = <GIC_SPI 2
> IRQ_TYPE_LEVEL_HIGH>;
> --			};
> --
> --			ap_sdhci0: sdhci@6e0000 {
> --				compatible = "marvell,armada-ap806-sdhci";
> --				reg = <0x6e0000 0x300>;
> --				interrupts = <GIC_SPI 16
> IRQ_TYPE_LEVEL_HIGH>;
> --				clock-names = "core";
> --				clocks = <&ap_clk 4>;
> --				dma-coherent;
> --				marvell,xenon-phy-slow-mode;
> --				status = "disabled";
> --			};
> --
> --			ap_syscon0: system-controller@6f4000 {
> --				compatible = "syscon", "simple-mfd";
> --				reg = <0x6f4000 0x2000>;
> --
> --				ap_clk: clock {
> --					compatible = "marvell,ap806-clock";
> --					#clock-cells = <1>;
> --				};
> --
> --				ap_pinctrl: pinctrl {
> --					compatible = "marvell,ap806-pinctrl";
> --
> --					uart0_pins: uart0-pins {
> --						marvell,pins = "mpp11",
> "mpp19";
> --						marvell,function = "uart0";
> --					};
> --				};
> --
> --				ap_gpio: gpio@1040 {
> --					compatible = "marvell,armada-8k-
> gpio";
> --					offset = <0x1040>;
> --					ngpios = <20>;
> --					gpio-controller;
> --					#gpio-cells = <2>;
> --					gpio-ranges = <&ap_pinctrl 0 0 20>;
> --				};
> --			};
> --
> --			ap_syscon1: system-controller@6f8000 {
> --				compatible = "syscon", "simple-mfd";
> --				reg = <0x6f8000 0x1000>;
> --				#address-cells = <1>;
> --				#size-cells = <1>;
> --
> --				cpu_clk: clock-cpu@278 {
> --					compatible = "marvell,ap806-cpu-
> clock";
> --					clocks = <&ap_clk 0>, <&ap_clk 1>;
> --					#clock-cells = <1>;
> --					reg = <0x278 0xa30>;
> --				};
> --
> --				ap_thermal: thermal-sensor@80 {
> --					compatible = "marvell,armada-ap806-
> thermal";
> --					reg = <0x80 0x10>;
> --					interrupt-parent = <&sei>;
> --					interrupts = <18>;
> --					#thermal-sensor-cells = <1>;
> --				};
> --			};
> --		};
> --	};
> --
> --	/*
> --	 * The thermal IP features one internal sensor plus, if applicable, one
> --	 * remote channel wired to one sensor per CPU.
> --	 *
> --	 * Only one thermal zone per AP/CP may trigger interrupts at a time,
> the
> --	 * first one that will have a critical trip point will be chosen.
> --	 */
> --	thermal-zones {
> --		ap_thermal_ic: ap-thermal-ic {
> --			polling-delay-passive = <0>; /* Interrupt driven */
> --			polling-delay = <0>; /* Interrupt driven */
> --
> --			thermal-sensors = <&ap_thermal 0>;
> --
> --			trips {
> --				ap_crit: ap-crit {
> --					temperature = <100000>; /* mC
> degrees */
> --					hysteresis = <2000>; /* mC degrees */
> --					type = "critical";
> --				};
> --			};
> --
> --			cooling-maps { };
> --		};
> --
> --		ap_thermal_cpu0: ap-thermal-cpu0 {
> --			polling-delay-passive = <1000>;
> --			polling-delay = <1000>;
> --
> --			thermal-sensors = <&ap_thermal 1>;
> --
> --			trips {
> --				cpu0_hot: cpu0-hot {
> --					temperature = <85000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --				cpu0_emerg: cpu0-emerg {
> --					temperature = <95000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --			};
> --
> --			cooling-maps {
> --				map0_hot: map0-hot {
> --					trip = <&cpu0_hot>;
> --					cooling-device = <&cpu0 1 2>,
> --						<&cpu1 1 2>;
> --				};
> --				map0_emerg: map0-ermerg {
> --					trip = <&cpu0_emerg>;
> --					cooling-device = <&cpu0 3 3>,
> --						<&cpu1 3 3>;
> --				};
> --			};
> --		};
> --
> --		ap_thermal_cpu1: ap-thermal-cpu1 {
> --			polling-delay-passive = <1000>;
> --			polling-delay = <1000>;
> --
> --			thermal-sensors = <&ap_thermal 2>;
> --
> --			trips {
> --				cpu1_hot: cpu1-hot {
> --					temperature = <85000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --				cpu1_emerg: cpu1-emerg {
> --					temperature = <95000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --			};
> --
> --			cooling-maps {
> --				map1_hot: map1-hot {
> --					trip = <&cpu1_hot>;
> --					cooling-device = <&cpu0 1 2>,
> --						<&cpu1 1 2>;
> --				};
> --				map1_emerg: map1-emerg {
> --					trip = <&cpu1_emerg>;
> --					cooling-device = <&cpu0 3 3>,
> --						<&cpu1 3 3>;
> --				};
> --			};
> --		};
> --
> --		ap_thermal_cpu2: ap-thermal-cpu2 {
> --			polling-delay-passive = <1000>;
> --			polling-delay = <1000>;
> --
> --			thermal-sensors = <&ap_thermal 3>;
> --
> --			trips {
> --				cpu2_hot: cpu2-hot {
> --					temperature = <85000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --				cpu2_emerg: cpu2-emerg {
> --					temperature = <95000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --			};
> --
> --			cooling-maps {
> --				map2_hot: map2-hot {
> --					trip = <&cpu2_hot>;
> --					cooling-device = <&cpu2 1 2>,
> --						<&cpu3 1 2>;
> --				};
> --				map2_emerg: map2-emerg {
> --					trip = <&cpu2_emerg>;
> --					cooling-device = <&cpu2 3 3>,
> --						<&cpu3 3 3>;
> --				};
> --			};
> --		};
> --
> --		ap_thermal_cpu3: ap-thermal-cpu3 {
> --			polling-delay-passive = <1000>;
> --			polling-delay = <1000>;
> --
> --			thermal-sensors = <&ap_thermal 4>;
> --
> --			trips {
> --				cpu3_hot: cpu3-hot {
> --					temperature = <85000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --				cpu3_emerg: cpu3-emerg {
> --					temperature = <95000>;
> --					hysteresis = <2000>;
> --					type = "passive";
> --				};
> --			};
> --
> --			cooling-maps {
> --				map3_hot: map3-bhot {
> --					trip = <&cpu3_hot>;
> --					cooling-device = <&cpu2 1 2>,
> --						<&cpu3 1 2>;
> --				};
> --				map3_emerg: map3-emerg {
> --					trip = <&cpu3_emerg>;
> --					cooling-device = <&cpu2 3 3>,
> --						<&cpu3 3 3>;
> --				};
> --			};
> --		};
> --	};
> - };
> ---- /dev/null
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> -@@ -0,0 +1,456 @@
> -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -+/*
> -+ * Copyright (C) 2019 Marvell Technology Group Ltd.
> -+ *
> -+ * Device Tree file for Marvell Armada AP80x.
> -+ */
> -+
> -+#include <dt-bindings/interrupt-controller/arm-gic.h>
> -+#include <dt-bindings/thermal/thermal.h>
> -+
> -+/dts-v1/;
> -+
> -+/ {
> -+	#address-cells = <2>;
> -+	#size-cells = <2>;
> -+
> -+	aliases {
> -+		serial0 = &uart0;
> -+		serial1 = &uart1;
> -+		gpio0 = &ap_gpio;
> -+		spi0 = &spi0;
> -+	};
> -+
> -+	psci {
> -+		compatible = "arm,psci-0.2";
> -+		method = "smc";
> -+	};
> -+
> -+	reserved-memory {
> -+		#address-cells = <2>;
> -+		#size-cells = <2>;
> -+		ranges;
> -+
> -+		/*
> -+		 * This area matches the mapping done with a
> -+		 * mainline U-Boot, and should be updated by the
> -+		 * bootloader.
> -+		 */
> -+
> -+		psci-area@4000000 {
> -+			reg = <0x0 0x4000000 0x0 0x200000>;
> -+			no-map;
> -+		};
> -+	};
> -+
> -+	AP_NAME {
> -+		#address-cells = <2>;
> -+		#size-cells = <2>;
> -+		compatible = "simple-bus";
> -+		interrupt-parent = <&gic>;
> -+		ranges;
> -+
> -+		config-space@f0000000 {
> -+			#address-cells = <1>;
> -+			#size-cells = <1>;
> -+			compatible = "simple-bus";
> -+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
> -+
> -+			gic: interrupt-controller@210000 {
> -+				compatible = "arm,gic-400";
> -+				#interrupt-cells = <3>;
> -+				#address-cells = <1>;
> -+				#size-cells = <1>;
> -+				ranges;
> -+				interrupt-controller;
> -+				interrupts = <GIC_PPI 9
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> -+				reg = <0x210000 0x10000>,
> -+				      <0x220000 0x20000>,
> -+				      <0x240000 0x20000>,
> -+				      <0x260000 0x20000>;
> -+
> -+				gic_v2m0: v2m@280000 {
> -+					compatible = "arm,gic-v2m-frame";
> -+					msi-controller;
> -+					reg = <0x280000 0x1000>;
> -+					arm,msi-base-spi = <160>;
> -+					arm,msi-num-spis = <32>;
> -+				};
> -+				gic_v2m1: v2m@290000 {
> -+					compatible = "arm,gic-v2m-frame";
> -+					msi-controller;
> -+					reg = <0x290000 0x1000>;
> -+					arm,msi-base-spi = <192>;
> -+					arm,msi-num-spis = <32>;
> -+				};
> -+				gic_v2m2: v2m@2a0000 {
> -+					compatible = "arm,gic-v2m-frame";
> -+					msi-controller;
> -+					reg = <0x2a0000 0x1000>;
> -+					arm,msi-base-spi = <224>;
> -+					arm,msi-num-spis = <32>;
> -+				};
> -+				gic_v2m3: v2m@2b0000 {
> -+					compatible = "arm,gic-v2m-frame";
> -+					msi-controller;
> -+					reg = <0x2b0000 0x1000>;
> -+					arm,msi-base-spi = <256>;
> -+					arm,msi-num-spis = <32>;
> -+				};
> -+			};
> -+
> -+			timer {
> -+				compatible = "arm,armv8-timer";
> -+				interrupts = <GIC_PPI 13
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -+					     <GIC_PPI 14
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -+					     <GIC_PPI 11
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -+					     <GIC_PPI 10
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> -+			};
> -+
> -+			pmu {
> -+				compatible = "arm,cortex-a72-pmu";
> -+				interrupt-parent = <&pic>;
> -+				interrupts = <17>;
> -+			};
> -+
> -+			odmi: odmi@300000 {
> -+				compatible = "marvell,odmi-controller";
> -+				interrupt-controller;
> -+				msi-controller;
> -+				marvell,odmi-frames = <4>;
> -+				reg = <0x300000 0x4000>,
> -+				      <0x304000 0x4000>,
> -+				      <0x308000 0x4000>,
> -+				      <0x30C000 0x4000>;
> -+				marvell,spi-base = <128>, <136>, <144>,
> <152>;
> -+			};
> -+
> -+			gicp: gicp@3f0040 {
> -+				compatible = "marvell,ap806-gicp";
> -+				reg = <0x3f0040 0x10>;
> -+				marvell,spi-ranges = <64 64>, <288 64>;
> -+				msi-controller;
> -+			};
> -+
> -+			pic: interrupt-controller@3f0100 {
> -+				compatible = "marvell,armada-8k-pic";
> -+				reg = <0x3f0100 0x10>;
> -+				#interrupt-cells = <1>;
> -+				interrupt-controller;
> -+				interrupts = <GIC_PPI 15
> IRQ_TYPE_LEVEL_HIGH>;
> -+			};
> -+
> -+			sei: interrupt-controller@3f0200 {
> -+				compatible = "marvell,ap806-sei";
> -+				reg = <0x3f0200 0x40>;
> -+				interrupts = <GIC_SPI 0
> IRQ_TYPE_LEVEL_HIGH>;
> -+				#interrupt-cells = <1>;
> -+				interrupt-controller;
> -+				msi-controller;
> -+			};
> -+
> -+			xor@400000 {
> -+				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> -+				reg = <0x400000 0x1000>,
> -+				      <0x410000 0x1000>;
> -+				msi-parent = <&gic_v2m0>;
> -+				clocks = <&ap_clk 3>;
> -+				dma-coherent;
> -+			};
> -+
> -+			xor@420000 {
> -+				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> -+				reg = <0x420000 0x1000>,
> -+				      <0x430000 0x1000>;
> -+				msi-parent = <&gic_v2m0>;
> -+				clocks = <&ap_clk 3>;
> -+				dma-coherent;
> -+			};
> -+
> -+			xor@440000 {
> -+				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> -+				reg = <0x440000 0x1000>,
> -+				      <0x450000 0x1000>;
> -+				msi-parent = <&gic_v2m0>;
> -+				clocks = <&ap_clk 3>;
> -+				dma-coherent;
> -+			};
> -+
> -+			xor@460000 {
> -+				compatible = "marvell,armada-7k-xor",
> "marvell,xor-v2";
> -+				reg = <0x460000 0x1000>,
> -+				      <0x470000 0x1000>;
> -+				msi-parent = <&gic_v2m0>;
> -+				clocks = <&ap_clk 3>;
> -+				dma-coherent;
> -+			};
> -+
> -+			spi0: spi@510600 {
> -+				compatible = "marvell,armada-380-spi";
> -+				reg = <0x510600 0x50>;
> -+				#address-cells = <1>;
> -+				#size-cells = <0>;
> -+				interrupts = <GIC_SPI 21
> IRQ_TYPE_LEVEL_HIGH>;
> -+				clocks = <&ap_clk 3>;
> -+				status = "disabled";
> -+			};
> -+
> -+			i2c0: i2c@511000 {
> -+				compatible = "marvell,mv78230-i2c";
> -+				reg = <0x511000 0x20>;
> -+				#address-cells = <1>;
> -+				#size-cells = <0>;
> -+				interrupts = <GIC_SPI 20
> IRQ_TYPE_LEVEL_HIGH>;
> -+				timeout-ms = <1000>;
> -+				clocks = <&ap_clk 3>;
> -+				status = "disabled";
> -+			};
> -+
> -+			uart0: serial@512000 {
> -+				compatible = "snps,dw-apb-uart";
> -+				reg = <0x512000 0x100>;
> -+				reg-shift = <2>;
> -+				interrupts = <GIC_SPI 19
> IRQ_TYPE_LEVEL_HIGH>;
> -+				reg-io-width = <1>;
> -+				clocks = <&ap_clk 3>;
> -+				status = "disabled";
> -+			};
> -+
> -+			uart1: serial@512100 {
> -+				compatible = "snps,dw-apb-uart";
> -+				reg = <0x512100 0x100>;
> -+				reg-shift = <2>;
> -+				interrupts = <GIC_SPI 29
> IRQ_TYPE_LEVEL_HIGH>;
> -+				reg-io-width = <1>;
> -+				clocks = <&ap_clk 3>;
> -+				status = "disabled";
> -+
> -+			};
> -+
> -+			watchdog: watchdog@610000 {
> -+				compatible = "arm,sbsa-gwdt";
> -+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
> -+				interrupts = <GIC_SPI 2
> IRQ_TYPE_LEVEL_HIGH>;
> -+			};
> -+
> -+			ap_sdhci0: sdhci@6e0000 {
> -+				compatible = "marvell,armada-ap806-sdhci";
> -+				reg = <0x6e0000 0x300>;
> -+				interrupts = <GIC_SPI 16
> IRQ_TYPE_LEVEL_HIGH>;
> -+				clock-names = "core";
> -+				clocks = <&ap_clk 4>;
> -+				dma-coherent;
> -+				marvell,xenon-phy-slow-mode;
> -+				status = "disabled";
> -+			};
> -+
> -+			ap_syscon0: system-controller@6f4000 {
> -+				compatible = "syscon", "simple-mfd";
> -+				reg = <0x6f4000 0x2000>;
> -+
> -+				ap_clk: clock {
> -+					compatible = "marvell,ap806-clock";
> -+					#clock-cells = <1>;
> -+				};
> -+
> -+				ap_pinctrl: pinctrl {
> -+					compatible = "marvell,ap806-pinctrl";
> -+
> -+					uart0_pins: uart0-pins {
> -+						marvell,pins = "mpp11",
> "mpp19";
> -+						marvell,function = "uart0";
> -+					};
> -+				};
> -+
> -+				ap_gpio: gpio@1040 {
> -+					compatible = "marvell,armada-8k-
> gpio";
> -+					offset = <0x1040>;
> -+					ngpios = <20>;
> -+					gpio-controller;
> -+					#gpio-cells = <2>;
> -+					gpio-ranges = <&ap_pinctrl 0 0 20>;
> -+				};
> -+			};
> -+
> -+			ap_syscon1: system-controller@6f8000 {
> -+				compatible = "syscon", "simple-mfd";
> -+				reg = <0x6f8000 0x1000>;
> -+				#address-cells = <1>;
> -+				#size-cells = <1>;
> -+
> -+				cpu_clk: clock-cpu@278 {
> -+					compatible = "marvell,ap806-cpu-
> clock";
> -+					clocks = <&ap_clk 0>, <&ap_clk 1>;
> -+					#clock-cells = <1>;
> -+					reg = <0x278 0xa30>;
> -+				};
> -+
> -+				ap_thermal: thermal-sensor@80 {
> -+					compatible = "marvell,armada-ap806-
> thermal";
> -+					reg = <0x80 0x10>;
> -+					interrupt-parent = <&sei>;
> -+					interrupts = <18>;
> -+					#thermal-sensor-cells = <1>;
> -+				};
> -+			};
> -+		};
> -+	};
> -+
> -+	/*
> -+	 * The thermal IP features one internal sensor plus, if applicable, one
> -+	 * remote channel wired to one sensor per CPU.
> -+	 *
> -+	 * Only one thermal zone per AP/CP may trigger interrupts at a time,
> the
> -+	 * first one that will have a critical trip point will be chosen.
> -+	 */
> -+	thermal-zones {
> -+		ap_thermal_ic: ap-thermal-ic {
> -+			polling-delay-passive = <0>; /* Interrupt driven */
> -+			polling-delay = <0>; /* Interrupt driven */
> -+
> -+			thermal-sensors = <&ap_thermal 0>;
> -+
> -+			trips {
> -+				ap_crit: ap-crit {
> -+					temperature = <100000>; /* mC
> degrees */
> -+					hysteresis = <2000>; /* mC degrees */
> -+					type = "critical";
> -+				};
> -+			};
> -+
> -+			cooling-maps { };
> -+		};
> -+
> -+		ap_thermal_cpu0: ap-thermal-cpu0 {
> -+			polling-delay-passive = <1000>;
> -+			polling-delay = <1000>;
> -+
> -+			thermal-sensors = <&ap_thermal 1>;
> -+
> -+			trips {
> -+				cpu0_hot: cpu0-hot {
> -+					temperature = <85000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+				cpu0_emerg: cpu0-emerg {
> -+					temperature = <95000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+			};
> -+
> -+			cooling-maps {
> -+				map0_hot: map0-hot {
> -+					trip = <&cpu0_hot>;
> -+					cooling-device = <&cpu0 1 2>,
> -+						<&cpu1 1 2>;
> -+				};
> -+				map0_emerg: map0-ermerg {
> -+					trip = <&cpu0_emerg>;
> -+					cooling-device = <&cpu0 3 3>,
> -+						<&cpu1 3 3>;
> -+				};
> -+			};
> -+		};
> -+
> -+		ap_thermal_cpu1: ap-thermal-cpu1 {
> -+			polling-delay-passive = <1000>;
> -+			polling-delay = <1000>;
> -+
> -+			thermal-sensors = <&ap_thermal 2>;
> -+
> -+			trips {
> -+				cpu1_hot: cpu1-hot {
> -+					temperature = <85000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+				cpu1_emerg: cpu1-emerg {
> -+					temperature = <95000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+			};
> -+
> -+			cooling-maps {
> -+				map1_hot: map1-hot {
> -+					trip = <&cpu1_hot>;
> -+					cooling-device = <&cpu0 1 2>,
> -+						<&cpu1 1 2>;
> -+				};
> -+				map1_emerg: map1-emerg {
> -+					trip = <&cpu1_emerg>;
> -+					cooling-device = <&cpu0 3 3>,
> -+						<&cpu1 3 3>;
> -+				};
> -+			};
> -+		};
> -+
> -+		ap_thermal_cpu2: ap-thermal-cpu2 {
> -+			polling-delay-passive = <1000>;
> -+			polling-delay = <1000>;
> -+
> -+			thermal-sensors = <&ap_thermal 3>;
> -+
> -+			trips {
> -+				cpu2_hot: cpu2-hot {
> -+					temperature = <85000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+				cpu2_emerg: cpu2-emerg {
> -+					temperature = <95000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+			};
> -+
> -+			cooling-maps {
> -+				map2_hot: map2-hot {
> -+					trip = <&cpu2_hot>;
> -+					cooling-device = <&cpu2 1 2>,
> -+						<&cpu3 1 2>;
> -+				};
> -+				map2_emerg: map2-emerg {
> -+					trip = <&cpu2_emerg>;
> -+					cooling-device = <&cpu2 3 3>,
> -+						<&cpu3 3 3>;
> -+				};
> -+			};
> -+		};
> -+
> -+		ap_thermal_cpu3: ap-thermal-cpu3 {
> -+			polling-delay-passive = <1000>;
> -+			polling-delay = <1000>;
> -+
> -+			thermal-sensors = <&ap_thermal 4>;
> -+
> -+			trips {
> -+				cpu3_hot: cpu3-hot {
> -+					temperature = <85000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+				cpu3_emerg: cpu3-emerg {
> -+					temperature = <95000>;
> -+					hysteresis = <2000>;
> -+					type = "passive";
> -+				};
> -+			};
> -+
> -+			cooling-maps {
> -+				map3_hot: map3-bhot {
> -+					trip = <&cpu3_hot>;
> -+					cooling-device = <&cpu2 1 2>,
> -+						<&cpu3 1 2>;
> -+				};
> -+				map3_emerg: map3-emerg {
> -+					trip = <&cpu3_emerg>;
> -+					cooling-device = <&cpu2 3 3>,
> -+						<&cpu3 3 3>;
> -+				};
> -+			};
> -+		};
> -+	};
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-
> support.patch b/target/linux/mvebu/patches-5.4/009-net-mvneta-add-
> XDP_TX-support.patch
> deleted file mode 100644
> index 8d9b775f7b..0000000000
> --- a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-
> support.patch
> +++ /dev/null
> @@ -1,175 +0,0 @@
> -From b0a43db9087a21d96e1a0b716b8d9963064b2d58 Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Sat, 19 Oct 2019 10:13:27 +0200
> -Subject: [PATCH 7/7] net: mvneta: add XDP_TX support
> -
> -Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
> -pointer
> -
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 128
> ++++++++++++++++++++++++--
> - 1 file changed, 121 insertions(+), 7 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -1813,16 +1813,19 @@ static void mvneta_txq_bufs_free(struct
> -
> - 		mvneta_txq_inc_get(txq);
> -
> --		if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr))
> -+		if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr) &&
> -+		    buf->type != MVNETA_TYPE_XDP_TX)
> - 			dma_unmap_single(pp->dev->dev.parent,
> - 					 tx_desc->buf_phys_addr,
> - 					 tx_desc->data_size,
> DMA_TO_DEVICE);
> --		if (!buf->skb)
> --			continue;
> --
> --		bytes_compl += buf->skb->len;
> --		pkts_compl++;
> --		dev_kfree_skb_any(buf->skb);
> -+		if (buf->type == MVNETA_TYPE_SKB && buf->skb) {
> -+			bytes_compl += buf->skb->len;
> -+			pkts_compl++;
> -+			dev_kfree_skb_any(buf->skb);
> -+		} else if (buf->type == MVNETA_TYPE_XDP_TX ||
> -+			   buf->type == MVNETA_TYPE_XDP_NDO) {
> -+			xdp_return_frame(buf->xdpf);
> -+		}
> - 	}
> -
> - 	netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
> -@@ -1987,6 +1990,111 @@ int mvneta_rx_refill_queue(struct mvneta
> - }
> -
> - static int
> -+mvneta_xdp_submit_frame(struct mvneta_port *pp, struct
> mvneta_tx_queue *txq,
> -+			struct xdp_frame *xdpf, bool dma_map)
> -+{
> -+	struct mvneta_tx_desc *tx_desc;
> -+	struct mvneta_tx_buf *buf;
> -+	dma_addr_t dma_addr;
> -+
> -+	if (txq->count >= txq->tx_stop_threshold)
> -+		return MVNETA_XDP_DROPPED;
> -+
> -+	tx_desc = mvneta_txq_next_desc_get(txq);
> -+
> -+	buf = &txq->buf[txq->txq_put_index];
> -+	if (dma_map) {
> -+		/* ndo_xdp_xmit */
> -+		dma_addr = dma_map_single(pp->dev->dev.parent, xdpf-
> >data,
> -+					  xdpf->len, DMA_TO_DEVICE);
> -+		if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) {
> -+			mvneta_txq_desc_put(txq);
> -+			return MVNETA_XDP_DROPPED;
> -+		}
> -+		buf->type = MVNETA_TYPE_XDP_NDO;
> -+	} else {
> -+		struct page *page = virt_to_page(xdpf->data);
> -+
> -+		dma_addr = page_pool_get_dma_addr(page) +
> -+			   sizeof(*xdpf) + xdpf->headroom;
> -+		dma_sync_single_for_device(pp->dev->dev.parent,
> dma_addr,
> -+					   xdpf->len, DMA_BIDIRECTIONAL);
> -+		buf->type = MVNETA_TYPE_XDP_TX;
> -+	}
> -+	buf->xdpf = xdpf;
> -+
> -+	tx_desc->command = MVNETA_TXD_FLZ_DESC;
> -+	tx_desc->buf_phys_addr = dma_addr;
> -+	tx_desc->data_size = xdpf->len;
> -+
> -+	mvneta_update_stats(pp, 1, xdpf->len, true);
> -+	mvneta_txq_inc_put(txq);
> -+	txq->pending++;
> -+	txq->count++;
> -+
> -+	return MVNETA_XDP_TX;
> -+}
> -+
> -+static int
> -+mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
> -+{
> -+	struct mvneta_tx_queue *txq;
> -+	struct netdev_queue *nq;
> -+	struct xdp_frame *xdpf;
> -+	int cpu;
> -+	u32 ret;
> -+
> -+	xdpf = convert_to_xdp_frame(xdp);
> -+	if (unlikely(!xdpf))
> -+		return MVNETA_XDP_DROPPED;
> -+
> -+	cpu = smp_processor_id();
> -+	txq = &pp->txqs[cpu % txq_number];
> -+	nq = netdev_get_tx_queue(pp->dev, txq->id);
> -+
> -+	__netif_tx_lock(nq, cpu);
> -+	ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false);
> -+	if (ret == MVNETA_XDP_TX)
> -+		mvneta_txq_pend_desc_add(pp, txq, 0);
> -+	__netif_tx_unlock(nq);
> -+
> -+	return ret;
> -+}
> -+
> -+static int
> -+mvneta_xdp_xmit(struct net_device *dev, int num_frame,
> -+		struct xdp_frame **frames, u32 flags)
> -+{
> -+	struct mvneta_port *pp = netdev_priv(dev);
> -+	int cpu = smp_processor_id();
> -+	struct mvneta_tx_queue *txq;
> -+	struct netdev_queue *nq;
> -+	int i, drops = 0;
> -+	u32 ret;
> -+
> -+	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
> -+		return -EINVAL;
> -+
> -+	txq = &pp->txqs[cpu % txq_number];
> -+	nq = netdev_get_tx_queue(pp->dev, txq->id);
> -+
> -+	__netif_tx_lock(nq, cpu);
> -+	for (i = 0; i < num_frame; i++) {
> -+		ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true);
> -+		if (ret != MVNETA_XDP_TX) {
> -+			xdp_return_frame_rx_napi(frames[i]);
> -+			drops++;
> -+		}
> -+	}
> -+
> -+	if (unlikely(flags & XDP_XMIT_FLUSH))
> -+		mvneta_txq_pend_desc_add(pp, txq, 0);
> -+	__netif_tx_unlock(nq);
> -+
> -+	return num_frame - drops;
> -+}
> -+
> -+static int
> - mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
> - 	       struct bpf_prog *prog, struct xdp_buff *xdp)
> - {
> -@@ -2008,6 +2116,11 @@ mvneta_run_xdp(struct mvneta_port *pp, s
> - 		}
> - 		break;
> - 	}
> -+	case XDP_TX:
> -+		ret = mvneta_xdp_xmit_back(pp, xdp);
> -+		if (ret != MVNETA_XDP_TX)
> -+			xdp_return_buff(xdp);
> -+		break;
> - 	default:
> - 		bpf_warn_invalid_xdp_action(act);
> - 		/* fall through */
> -@@ -4581,6 +4694,7 @@ static const struct net_device_ops mvnet
> - 	.ndo_get_stats64     = mvneta_get_stats64,
> - 	.ndo_do_ioctl        = mvneta_ioctl,
> - 	.ndo_bpf             = mvneta_xdp,
> -+	.ndo_xdp_xmit        = mvneta_xdp_xmit,
> - };
> -
> - static const struct ethtool_ops mvneta_eth_tool_ops = {
> diff --git a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-
> Move-clocks-to-AP806-specific-file.patch b/target/linux/mvebu/patches-
> 5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
> deleted file mode 100644
> index 38965dd9e5..0000000000
> --- a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-
> clocks-to-AP806-specific-file.patch
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00
> 2001
> -From: Miquel Raynal <miquel.raynal@bootlin.com>
> -Date: Fri, 4 Oct 2019 16:27:23 +0200
> -Subject: [PATCH] arm64: dts: marvell: Move clocks to AP806 specific file
> -
> -Regular clocks and CPU clocks are specific to AP806, move them out of
> -the generic AP80x file so that AP807 can use its own clocks.
> -
> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++
> - arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------
> - 2 files changed, 16 insertions(+), 12 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> -@@ -12,3 +12,19 @@
> - 	model = "Marvell Armada AP806";
> - 	compatible = "marvell,armada-ap806";
> - };
> -+
> -+&ap_syscon0 {
> -+	ap_clk: clock {
> -+		compatible = "marvell,ap806-clock";
> -+		#clock-cells = <1>;
> -+	};
> -+};
> -+
> -+&ap_syscon1 {
> -+	cpu_clk: clock-cpu@278 {
> -+		compatible = "marvell,ap806-cpu-clock";
> -+		clocks = <&ap_clk 0>, <&ap_clk 1>;
> -+		#clock-cells = <1>;
> -+		reg = <0x278 0xa30>;
> -+	};
> -+};
> ---- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> -@@ -248,11 +248,6 @@
> - 				compatible = "syscon", "simple-mfd";
> - 				reg = <0x6f4000 0x2000>;
> -
> --				ap_clk: clock {
> --					compatible = "marvell,ap806-clock";
> --					#clock-cells = <1>;
> --				};
> --
> - 				ap_pinctrl: pinctrl {
> - 					compatible = "marvell,ap806-pinctrl";
> -
> -@@ -278,13 +273,6 @@
> - 				#address-cells = <1>;
> - 				#size-cells = <1>;
> -
> --				cpu_clk: clock-cpu@278 {
> --					compatible = "marvell,ap806-cpu-
> clock";
> --					clocks = <&ap_clk 0>, <&ap_clk 1>;
> --					#clock-cells = <1>;
> --					reg = <0x278 0xa30>;
> --				};
> --
> - 				ap_thermal: thermal-sensor@80 {
> - 					compatible = "marvell,armada-ap806-
> thermal";
> - 					reg = <0x80 0x10>;
> diff --git a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-
> for-bm-capable-devices.patch b/target/linux/mvebu/patches-5.4/010-net-
> mvneta-fix-build-skb-for-bm-capable-devices.patch
> deleted file mode 100644
> index adfa51e4e8..0000000000
> --- a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-
> capable-devices.patch
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -From b37fa92e20ef28aada852cbf03b368d29a20478c Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Thu, 14 Nov 2019 01:25:55 +0200
> -Subject: [PATCH] net: mvneta: fix build skb for bm capable devices
> -
> -Fix build_skb for bm capable devices when they fall-back using swbm path
> -(e.g. when bm properties are configured in device tree but
> -CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction
> is
> -overwritten so we need to use it building skb instead of
> -MVNETA_SKB_HEADROOM directly
> -
> -Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm
> poll routine")
> -Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Reported-by: Andrew Lunn <andrew@lunn.ch>
> -Tested-by: Andrew Lunn <andrew@lunn.ch>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 4 ++--
> - 1 file changed, 2 insertions(+), 2 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -2167,7 +2167,7 @@ mvneta_swbm_rx_frame(struct mvneta_port
> - 	prefetch(data);
> -
> - 	xdp->data_hard_start = data;
> --	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
> -+	xdp->data = data + pp->rx_offset_correction + MVNETA_MH_SIZE;
> - 	xdp->data_end = xdp->data + data_len;
> - 	xdp_set_data_meta_invalid(xdp);
> -
> -@@ -2232,7 +2232,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
> - 		/* refill descriptor with new buffer later */
> - 		skb_add_rx_frag(rxq->skb,
> - 				skb_shinfo(rxq->skb)->nr_frags,
> --				page, MVNETA_SKB_HEADROOM, data_len,
> -+				page, pp->rx_offset_correction, data_len,
> - 				PAGE_SIZE);
> - 	}
> - 	page_pool_release_page(rxq->page_pool, page);
> diff --git a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-
> i2c-fast-mode.patch b/target/linux/mvebu/patches-5.4/011-arm64-dts-
> uDPU-remove-i2c-fast-mode.patch
> deleted file mode 100644
> index 2922d49f44..0000000000
> --- a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-
> mode.patch
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -From fe3ec631a77ded87817f449691710a436a80caa7 Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@armlinux.org.uk>
> -Date: Sat, 16 Nov 2019 11:07:01 +0000
> -Subject: [PATCH] arm64: dts: uDPU: remove i2c-fast-mode
> -
> -The I2C bus violates the timing specifications when run in fast mode
> -on the uDPU, so switch to 100kHz mode.
> -
> -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
> - 1 file changed, 2 insertions(+)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -@@ -119,12 +119,14 @@
> - 	status = "okay";
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&i2c1_pins>;
> -+	/delete-property/mrvl,i2c-fast-mode;
> - };
> -
> - &i2c1 {
> - 	status = "okay";
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&i2c2_pins>;
> -+	/delete-property/mrvl,i2c-fast-mode;
> -
> - 	lm75@48 {
> - 		status = "okay";
> diff --git a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-
> support-3W-modules.patch b/target/linux/mvebu/patches-5.4/012-arm64-
> dts-uDPU-SFP-cages-support-3W-modules.patch
> deleted file mode 100644
> index 1884def2c6..0000000000
> --- a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-
> support-3W-modules.patch
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -From cd592187f9de3c6305d6c1c66f7fac084cb5b846 Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@armlinux.org.uk>
> -Date: Tue, 19 Nov 2019 22:53:04 +0000
> -Subject: [PATCH] arm64: dts: uDPU: SFP cages support 3W modules
> -
> -The SFP cages are designed to support up to 3W modules, such as G.hn,
> -G.fast and MoCA modules. Although there is no way for such modules to
> -declare to software that they consume 3W, we document in DT that this
> -is the designed power level for these cages.
> -
> -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
> - 1 file changed, 2 insertions(+)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -@@ -69,6 +69,7 @@
> - 		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> - 		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
> - 		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
> -+		maximum-power-milliwatt = <3000>;
> - 	};
> -
> - 	sfp_eth1: sfp-eth1 {
> -@@ -78,6 +79,7 @@
> - 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
> - 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
> - 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
> -+		maximum-power-milliwatt = <3000>;
> - 	};
> - };
> -
> diff --git a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-
> page_pool_recycle_direct-in-mvnet.patch b/target/linux/mvebu/patches-
> 5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
> deleted file mode 100644
> index 6e79aeb358..0000000000
> --- a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-
> page_pool_recycle_direct-in-mvnet.patch
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -From f383b2950070ce4f34e74db94f70bb565b746e97 Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Wed, 20 Nov 2019 16:54:17 +0200
> -Subject: [PATCH] net: mvneta: rely on page_pool_recycle_direct in
> - mvneta_run_xdp
> -
> -Rely on page_pool_recycle_direct and not on xdp_return_buff in
> -mvneta_run_xdp. This is a preliminary patch to limit the dma sync len
> -to the one strictly necessary
> -
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 6 ++++--
> - 1 file changed, 4 insertions(+), 2 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -2110,7 +2110,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
> - 		err = xdp_do_redirect(pp->dev, xdp, prog);
> - 		if (err) {
> - 			ret = MVNETA_XDP_DROPPED;
> --			xdp_return_buff(xdp);
> -+			page_pool_recycle_direct(rxq->page_pool,
> -+						 virt_to_head_page(xdp-
> >data));
> - 		} else {
> - 			ret = MVNETA_XDP_REDIR;
> - 		}
> -@@ -2119,7 +2120,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
> - 	case XDP_TX:
> - 		ret = mvneta_xdp_xmit_back(pp, xdp);
> - 		if (ret != MVNETA_XDP_TX)
> --			xdp_return_buff(xdp);
> -+			page_pool_recycle_direct(rxq->page_pool,
> -+						 virt_to_head_page(xdp-
> >data));
> - 		break;
> - 	default:
> - 		bpf_warn_invalid_xdp_action(act);
> diff --git a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-
> XDP-program-on-hardware-buffe.patch b/target/linux/mvebu/patches-
> 5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
> deleted file mode 100644
> index 6558c6a6e2..0000000000
> --- a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-
> program-on-hardware-buffe.patch
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -From 79572c98c554dcdb080bca547c871a51716dcdf8 Mon Sep 17 00:00:00
> 2001
> -From: Sven Auhagen <sven.auhagen@voleatech.de>
> -Date: Sat, 25 Jan 2020 08:07:03 +0000
> -Subject: [PATCH] mvneta driver disallow XDP program on hardware buffer
> - management
> -
> -Recently XDP Support was added to the mvneta driver
> -for software buffer management only.
> -It is still possible to attach an XDP program if
> -hardware buffer management is used.
> -It is not doing anything at that point.
> -
> -The patch disallows attaching XDP programs to mvneta
> -if hardware buffer management is used.
> -
> -I am sorry about that. It is my first submission and I am having
> -some troubles with the format of my emails.
> -
> -v4 -> v5:
> -- Remove extra tabs
> -
> -v3 -> v4:
> -- Please ignore v3 I accidentally submitted
> -  my other patch with git-send-mail and v4 is correct
> -
> -v2 -> v3:
> -- My mailserver corrupted the patch
> -  resubmission with git-send-email
> -
> -v1 -> v2:
> -- Fixing the patches indentation
> -
> -Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 6 ++++++
> - 1 file changed, 6 insertions(+)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -4270,6 +4270,12 @@ static int mvneta_xdp_setup(struct net_d
> - 		return -EOPNOTSUPP;
> - 	}
> -
> -+	if (pp->bm_priv) {
> -+		NL_SET_ERR_MSG_MOD(extack,
> -+				   "Hardware Buffer Management not
> supported on XDP");
> -+		return -EOPNOTSUPP;
> -+	}
> -+
> - 	need_update = !!pp->xdp_prog != !!prog;
> - 	if (running && need_update)
> - 		mvneta_stop(dev);
> diff --git a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-
> support-if-sw-bm-is-used-as-fallb.patch b/target/linux/mvebu/patches-
> 5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
> deleted file mode 100644
> index 1299f3f69b..0000000000
> --- a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-
> sw-bm-is-used-as-fallb.patch
> +++ /dev/null
> @@ -1,67 +0,0 @@
> -From 44efc78d0e464ce70b45b165c005f8bedc17952e Mon Sep 17 00:00:00
> 2001
> -From: Lorenzo Bianconi <lorenzo@kernel.org>
> -Date: Wed, 29 Jan 2020 12:50:53 +0100
> -Subject: [PATCH] net: mvneta: fix XDP support if sw bm is used as fallback
> -
> -In order to fix XDP support if sw buffer management is used as fallback
> -for hw bm devices, define MVNETA_SKB_HEADROOM as maximum
> between
> -XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP
> header
> -to 4-byte boundary.
> -Fix rx_offset_correction initialization if mvneta_bm_port_init fails in
> -mvneta_resume routine
> -
> -Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
> -Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
> -Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> -Signed-off-by: David S. Miller <davem@davemloft.net>
> ----
> - drivers/net/ethernet/marvell/mvneta.c | 10 +++++++---
> - 1 file changed, 7 insertions(+), 3 deletions(-)
> -
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -326,8 +326,7 @@
> - 	      ETH_HLEN + ETH_FCS_LEN,			     \
> - 	      cache_line_size())
> -
> --#define MVNETA_SKB_HEADROOM	(max(XDP_PACKET_HEADROOM,
> NET_SKB_PAD) + \
> --				 NET_IP_ALIGN)
> -+#define MVNETA_SKB_HEADROOM	max(XDP_PACKET_HEADROOM,
> NET_SKB_PAD)
> - #define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct
> skb_shared_info) + \
> - 			 MVNETA_SKB_HEADROOM))
> - #define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) +
> MVNETA_SKB_PAD)
> -@@ -1174,6 +1173,7 @@ bm_mtu_err:
> - 	mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp-
> >id);
> -
> - 	pp->bm_priv = NULL;
> -+	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
> - 	mvreg_write(pp, MVNETA_ACC_MODE,
> MVNETA_ACC_MODE_EXT1);
> - 	netdev_info(pp->dev, "fail to update MTU, fall back to software
> BM\n");
> - }
> -@@ -4989,7 +4989,6 @@ static int mvneta_probe(struct platform_
> - 	SET_NETDEV_DEV(dev, &pdev->dev);
> -
> - 	pp->id = global_port_id++;
> --	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
> -
> - 	/* Obtain access to BM resources if enabled and already initialized */
> - 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
> -@@ -5014,6 +5013,10 @@ static int mvneta_probe(struct platform_
> - 	}
> - 	of_node_put(bm_node);
> -
> -+	/* sw buffer management */
> -+	if (!pp->bm_priv)
> -+		pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
> -+
> - 	err = mvneta_init(&pdev->dev, pp);
> - 	if (err < 0)
> - 		goto err_netdev;
> -@@ -5171,6 +5174,7 @@ static int mvneta_resume(struct device *
> - 		err = mvneta_bm_port_init(pdev, pp);
> - 		if (err < 0) {
> - 			dev_info(&pdev->dev, "use SW buffer
> management\n");
> -+			pp->rx_offset_correction =
> MVNETA_SKB_HEADROOM;
> - 			pp->bm_priv = NULL;
> - 		}
> - 	}
> diff --git a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-
> immediately-after-enabling-t.patch b/target/linux/mvebu/patches-5.4/016-
> PCI-aardvark-Train-link-immediately-after-enabling-t.patch
> deleted file mode 100644
> index 3ff0dcb166..0000000000
> --- a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-
> immediately-after-enabling-t.patch
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -From 6964494582f56a3882c2c53b0edbfe99eb32b2e1 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Thu, 30 Apr 2020 10:06:14 +0200
> -Subject: [PATCH] PCI: aardvark: Train link immediately after enabling training
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
> -training and starting link training causes detection issues with some
> -buggy cards (such as Compex WLE900VX).
> -
> -Move the code which enables link training immediately before the one
> -which starts link traning.
> -
> -This fixes detection issues of Compex WLE900VX card on Turris MOX after
> -cold boot.
> -
> -Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
> -Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Acked-by: Rob Herring <robh@kernel.org>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 15 +++++++++------
> - 1 file changed, 9 insertions(+), 6 deletions(-)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -311,11 +311,6 @@ static void advk_pcie_setup_hw(struct ad
> - 	reg |= LANE_COUNT_1;
> - 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> -
> --	/* Enable link training */
> --	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> --	reg |= LINK_TRAINING_EN;
> --	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> --
> - 	/* Enable MSI */
> - 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
> - 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
> -@@ -357,7 +352,15 @@ static void advk_pcie_setup_hw(struct ad
> - 	 */
> - 	msleep(PCI_PM_D3COLD_WAIT);
> -
> --	/* Start link training */
> -+	/* Enable link training */
> -+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> -+	reg |= LINK_TRAINING_EN;
> -+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> -+
> -+	/*
> -+	 * Start link training immediately after enabling it.
> -+	 * This solves problems for some buggy cards.
> -+	 */
> - 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> - 	reg |= PCIE_CORE_LINK_TRAINING;
> - 	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
> diff --git a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-
> training.patch b/target/linux/mvebu/patches-5.4/017-PCI-aardvark-
> Improve-link-training.patch
> deleted file mode 100644
> index e3a38740c3..0000000000
> --- a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-
> training.patch
> +++ /dev/null
> @@ -1,208 +0,0 @@
> -From 43fc679ced18006b12d918d7a8a4af392b7fbfe7 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
> -Date: Thu, 30 Apr 2020 10:06:17 +0200
> -Subject: [PATCH] PCI: aardvark: Improve link training
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Currently the aardvark driver trains link in PCIe gen2 mode. This may
> -cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
> -even not detected. Moreover when ASPM code tries to retrain link second
> -time, these cards may stop responding and link goes down. If gen1 is
> -used this does not happen.
> -
> -Unconditionally forcing gen1 is not a good solution since it may have
> -performance impact on gen2 cards.
> -
> -To overcome this, read 'max-link-speed' property (as defined in PCI
> -device tree bindings) and use this as max gen mode. Then iteratively try
> -link training at this mode or lower until successful. After successful
> -link training choose final controller gen based on Negotiated Link Speed
> -from Link Status register, which should match card speed.
> -
> -Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Signed-off-by: Marek Behún <marek.behun@nic.cz>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Reviewed-by: Rob Herring <robh@kernel.org>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++------
> - 1 file changed, 89 insertions(+), 25 deletions(-)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -39,6 +39,7 @@
> - #define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
> - #define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
> - #define     PCIE_CORE_LINK_TRAINING				BIT(5)
> -+#define     PCIE_CORE_LINK_SPEED_SHIFT				16
> - #define     PCIE_CORE_LINK_WIDTH_SHIFT				20
> - #define PCIE_CORE_ERR_CAPCTL_REG				0x118
> - #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
> -@@ -202,6 +203,7 @@ struct advk_pcie {
> - 	struct mutex msi_used_lock;
> - 	u16 msi_msg;
> - 	int root_bus_nr;
> -+	int link_gen;
> - 	struct pci_bridge_emul bridge;
> - };
> -
> -@@ -226,20 +228,16 @@ static int advk_pcie_link_up(struct advk
> -
> - static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
> - {
> --	struct device *dev = &pcie->pdev->dev;
> - 	int retries;
> -
> - 	/* check if the link is up or not */
> - 	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> --		if (advk_pcie_link_up(pcie)) {
> --			dev_info(dev, "link up\n");
> -+		if (advk_pcie_link_up(pcie))
> - 			return 0;
> --		}
> -
> - 		usleep_range(LINK_WAIT_USLEEP_MIN,
> LINK_WAIT_USLEEP_MAX);
> - 	}
> -
> --	dev_err(dev, "link never came up\n");
> - 	return -ETIMEDOUT;
> - }
> -
> -@@ -254,6 +252,85 @@ static void advk_pcie_wait_for_retrain(s
> - 	}
> - }
> -
> -+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
> -+{
> -+	int ret, neg_gen;
> -+	u32 reg;
> -+
> -+	/* Setup link speed */
> -+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> -+	reg &= ~PCIE_GEN_SEL_MSK;
> -+	if (gen == 3)
> -+		reg |= SPEED_GEN_3;
> -+	else if (gen == 2)
> -+		reg |= SPEED_GEN_2;
> -+	else
> -+		reg |= SPEED_GEN_1;
> -+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> -+
> -+	/*
> -+	 * Enable link training. This is not needed in every call to this
> -+	 * function, just once suffices, but it does not break anything either.
> -+	 */
> -+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> -+	reg |= LINK_TRAINING_EN;
> -+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> -+
> -+	/*
> -+	 * Start link training immediately after enabling it.
> -+	 * This solves problems for some buggy cards.
> -+	 */
> -+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> -+	reg |= PCIE_CORE_LINK_TRAINING;
> -+	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
> -+
> -+	ret = advk_pcie_wait_for_link(pcie);
> -+	if (ret)
> -+		return ret;
> -+
> -+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> -+	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
> -+
> -+	return neg_gen;
> -+}
> -+
> -+static void advk_pcie_train_link(struct advk_pcie *pcie)
> -+{
> -+	struct device *dev = &pcie->pdev->dev;
> -+	int neg_gen = -1, gen;
> -+
> -+	/*
> -+	 * Try link training at link gen specified by device tree property
> -+	 * 'max-link-speed'. If this fails, iteratively train at lower gen.
> -+	 */
> -+	for (gen = pcie->link_gen; gen > 0; --gen) {
> -+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
> -+		if (neg_gen > 0)
> -+			break;
> -+	}
> -+
> -+	if (neg_gen < 0)
> -+		goto err;
> -+
> -+	/*
> -+	 * After successful training if negotiated gen is lower than requested,
> -+	 * train again on negotiated gen. This solves some stability issues for
> -+	 * some buggy gen1 cards.
> -+	 */
> -+	if (neg_gen < gen) {
> -+		gen = neg_gen;
> -+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
> -+	}
> -+
> -+	if (neg_gen == gen) {
> -+		dev_info(dev, "link up at gen %i\n", gen);
> -+		return;
> -+	}
> -+
> -+err:
> -+	dev_err(dev, "link never came up\n");
> -+}
> -+
> - static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> - {
> - 	u32 reg;
> -@@ -299,12 +376,6 @@ static void advk_pcie_setup_hw(struct ad
> - 		PCIE_CORE_CTRL2_TD_ENABLE;
> - 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
> -
> --	/* Set GEN2 */
> --	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> --	reg &= ~PCIE_GEN_SEL_MSK;
> --	reg |= SPEED_GEN_2;
> --	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> --
> - 	/* Set lane X1 */
> - 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> - 	reg &= ~LANE_CNT_MSK;
> -@@ -352,20 +423,7 @@ static void advk_pcie_setup_hw(struct ad
> - 	 */
> - 	msleep(PCI_PM_D3COLD_WAIT);
> -
> --	/* Enable link training */
> --	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> --	reg |= LINK_TRAINING_EN;
> --	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> --
> --	/*
> --	 * Start link training immediately after enabling it.
> --	 * This solves problems for some buggy cards.
> --	 */
> --	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> --	reg |= PCIE_CORE_LINK_TRAINING;
> --	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
> --
> --	advk_pcie_wait_for_link(pcie);
> -+	advk_pcie_train_link(pcie);
> -
> - 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
> - 	reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
> -@@ -1077,6 +1135,12 @@ static int advk_pcie_probe(struct platfo
> - 		return ret;
> - 	}
> -
> -+	ret = of_pci_get_max_link_speed(dev->of_node);
> -+	if (ret <= 0 || ret > 3)
> -+		pcie->link_gen = 3;
> -+	else
> -+		pcie->link_gen = ret;
> -+
> - 	advk_pcie_setup_hw(pcie);
> -
> - 	ret = advk_sw_pci_bridge_init(pcie);
> diff --git a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-
> via-GPIO.patch b/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-
> PERST-via-GPIO.patch
> deleted file mode 100644
> index fde01fa987..0000000000
> --- a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-
> GPIO.patch
> +++ /dev/null
> @@ -1,123 +0,0 @@
> -From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Thu, 30 Apr 2020 10:06:18 +0200
> -Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Add support for issuing PERST via GPIO specified in 'reset-gpios'
> -property (as described in PCI device tree bindings).
> -
> -Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
> -after reboot when PERST is not issued during driver initialization.
> -
> -If bootloader already enabled link training then issuing PERST has no
> -effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
> -not detected. We therefore clear the LINK_TRAINING_EN register before.
> -
> -It was observed that Compex WLE900VX card needs to be in PERST reset
> -for at least 10ms if bootloader enabled link training.
> -
> -Tested on Turris MOX.
> -
> -Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 43
> ++++++++++++++++++++++++++-
> - 1 file changed, 42 insertions(+), 1 deletion(-)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -9,6 +9,7 @@
> -  */
> -
> - #include <linux/delay.h>
> -+#include <linux/gpio.h>
> - #include <linux/interrupt.h>
> - #include <linux/irq.h>
> - #include <linux/irqdomain.h>
> -@@ -17,6 +18,7 @@
> - #include <linux/init.h>
> - #include <linux/platform_device.h>
> - #include <linux/of_address.h>
> -+#include <linux/of_gpio.h>
> - #include <linux/of_pci.h>
> -
> - #include "../pci.h"
> -@@ -205,6 +207,7 @@ struct advk_pcie {
> - 	int root_bus_nr;
> - 	int link_gen;
> - 	struct pci_bridge_emul bridge;
> -+	struct gpio_desc *reset_gpio;
> - };
> -
> - static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
> -@@ -331,10 +334,31 @@ err:
> - 	dev_err(dev, "link never came up\n");
> - }
> -
> -+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
> -+{
> -+	u32 reg;
> -+
> -+	if (!pcie->reset_gpio)
> -+		return;
> -+
> -+	/* PERST does not work for some cards when link training is enabled
> */
> -+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> -+	reg &= ~LINK_TRAINING_EN;
> -+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> -+
> -+	/* 10ms delay is needed for some cards */
> -+	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for
> 10ms\n");
> -+	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> -+	usleep_range(10000, 11000);
> -+	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> -+}
> -+
> - static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> - {
> - 	u32 reg;
> -
> -+	advk_pcie_issue_perst(pcie);
> -+
> - 	/* Set to Direct mode */
> - 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
> - 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
> -@@ -417,7 +441,8 @@ static void advk_pcie_setup_hw(struct ad
> -
> - 	/*
> - 	 * PERST# signal could have been asserted by pinctrl subsystem
> before
> --	 * probe() callback has been called, making the endpoint going into
> -+	 * probe() callback has been called or issued explicitly by reset gpio
> -+	 * function advk_pcie_issue_perst(), making the endpoint going into
> - 	 * fundamental reset. As required by PCI Express spec a delay for at
> - 	 * least 100ms after such a reset before link training is needed.
> - 	 */
> -@@ -1135,6 +1160,22 @@ static int advk_pcie_probe(struct platfo
> - 		return ret;
> - 	}
> -
> -+	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev-
> >of_node,
> -+						       "reset-gpios", 0,
> -+						       GPIOD_OUT_LOW,
> -+						       "pcie1-reset");
> -+	ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
> -+	if (ret) {
> -+		if (ret == -ENOENT) {
> -+			pcie->reset_gpio = NULL;
> -+		} else {
> -+			if (ret != -EPROBE_DEFER)
> -+				dev_err(dev, "Failed to get reset-gpio: %i\n",
> -+					ret);
> -+			return ret;
> -+		}
> -+	}
> -+
> - 	ret = of_pci_get_max_link_speed(dev->of_node);
> - 	if (ret <= 0 || ret > 3)
> - 		pcie->link_gen = 3;
> diff --git a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-
> support.patch b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-
> PHY-support.patch
> deleted file mode 100644
> index edff5c4a9c..0000000000
> --- a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-
> support.patch
> +++ /dev/null
> @@ -1,152 +0,0 @@
> -From 366697018c9a2aa67d457bfdc495115cface6ae8 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
> -Date: Thu, 30 Apr 2020 10:06:20 +0200
> -Subject: [PATCH] PCI: aardvark: Add PHY support
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -With recent proposed changes for U-Boot it is possible that bootloader
> -won't initialize the PHY for this controller (currently the PHY is
> -initialized regardless whether PCI is used in U-Boot, but with these
> -proposed changes the PHY is initialized only on request).
> -
> -Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
> -PCIe PHY, and since Linux' functionality should be independent on what
> -bootloader did, add code for enabling generic PHY if found in device OF
> -node.
> -
> -The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
> -Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
> -one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
> -Instead ARM Trusted Firmware expects PCIe driver to do this step,
> -probably because the register is in PCIe controller address space,
> -instead of PHY address space. We therefore add this step into the
> -advk_pcie_setup_hw function.
> -
> -[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-
> a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836
> -
> -Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Signed-off-by: Marek Behún <marek.behun@nic.cz>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Reviewed-by: Rob Herring <robh@kernel.org>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> -Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 69
> +++++++++++++++++++++++++++
> - 1 file changed, 69 insertions(+)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -16,6 +16,7 @@
> - #include <linux/kernel.h>
> - #include <linux/pci.h>
> - #include <linux/init.h>
> -+#include <linux/phy/phy.h>
> - #include <linux/platform_device.h>
> - #include <linux/of_address.h>
> - #include <linux/of_gpio.h>
> -@@ -103,6 +104,8 @@
> - #define     PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE	BIT(5)
> - #define     PCIE_CORE_CTRL2_OB_WIN_ENABLE	BIT(6)
> - #define     PCIE_CORE_CTRL2_MSI_ENABLE		BIT(10)
> -+#define PCIE_CORE_REF_CLK_REG
> 	(CONTROL_BASE_ADDR + 0x14)
> -+#define     PCIE_CORE_REF_CLK_TX_ENABLE		BIT(1)
> - #define PCIE_MSG_LOG_REG
> 	(CONTROL_BASE_ADDR + 0x30)
> - #define PCIE_ISR0_REG
> 	(CONTROL_BASE_ADDR + 0x40)
> - #define PCIE_MSG_PM_PME_MASK			BIT(7)
> -@@ -208,6 +211,7 @@ struct advk_pcie {
> - 	int link_gen;
> - 	struct pci_bridge_emul bridge;
> - 	struct gpio_desc *reset_gpio;
> -+	struct phy *phy;
> - };
> -
> - static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
> -@@ -359,6 +363,11 @@ static void advk_pcie_setup_hw(struct ad
> -
> - 	advk_pcie_issue_perst(pcie);
> -
> -+	/* Enable TX */
> -+	reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
> -+	reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
> -+	advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
> -+
> - 	/* Set to Direct mode */
> - 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
> - 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
> -@@ -1125,6 +1134,62 @@ out_release_res:
> - 	return err;
> - }
> -
> -+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie
> *pcie)
> -+{
> -+	phy_power_off(pcie->phy);
> -+	phy_exit(pcie->phy);
> -+}
> -+
> -+static int advk_pcie_enable_phy(struct advk_pcie *pcie)
> -+{
> -+	int ret;
> -+
> -+	if (!pcie->phy)
> -+		return 0;
> -+
> -+	ret = phy_init(pcie->phy);
> -+	if (ret)
> -+		return ret;
> -+
> -+	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> -+	if (ret) {
> -+		phy_exit(pcie->phy);
> -+		return ret;
> -+	}
> -+
> -+	ret = phy_power_on(pcie->phy);
> -+	if (ret) {
> -+		phy_exit(pcie->phy);
> -+		return ret;
> -+	}
> -+
> -+	return 0;
> -+}
> -+
> -+static int advk_pcie_setup_phy(struct advk_pcie *pcie)
> -+{
> -+	struct device *dev = &pcie->pdev->dev;
> -+	struct device_node *node = dev->of_node;
> -+	int ret = 0;
> -+
> -+	pcie->phy = devm_of_phy_get(dev, node, NULL);
> -+	if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
> -+		return PTR_ERR(pcie->phy);
> -+
> -+	/* Old bindings miss the PHY handle */
> -+	if (IS_ERR(pcie->phy)) {
> -+		dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie-
> >phy));
> -+		pcie->phy = NULL;
> -+		return 0;
> -+	}
> -+
> -+	ret = advk_pcie_enable_phy(pcie);
> -+	if (ret)
> -+		dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
> -+
> -+	return ret;
> -+}
> -+
> - static int advk_pcie_probe(struct platform_device *pdev)
> - {
> - 	struct device *dev = &pdev->dev;
> -@@ -1182,6 +1247,10 @@ static int advk_pcie_probe(struct platfo
> - 	else
> - 		pcie->link_gen = ret;
> -
> -+	ret = advk_pcie_setup_phy(pcie);
> -+	if (ret)
> -+		return ret;
> -+
> - 	advk_pcie_setup_hw(pcie);
> -
> - 	ret = advk_sw_pci_bridge_init(pcie);
> diff --git a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-
> 37xx-Set-pcie_reset_pin-to-.patch b/target/linux/mvebu/patches-5.4/020-
> arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
> deleted file mode 100644
> index dd75470b4d..0000000000
> --- a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-
> Set-pcie_reset_pin-to-.patch
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -From 715878016984b2617f6c1f177c50039e12e7bd5b Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
> -Date: Thu, 30 Apr 2020 10:06:23 +0200
> -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to
> gpio
> - function
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -We found out that we are unable to control the PERST# signal via the
> -default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
> -this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
> -register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
> -value of this register does not change the pin output when measuring
> -with voltmeter.
> -
> -We do not know if this is a bug in the SOC, or if it works only when
> -PCIe controller is in a certain state.
> -
> -Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
> -before training link") says that when this pin changes pinctrl mode
> -from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
> -moment.
> -
> -So currently the situation is that on A3700 boards the PERST# signal is
> -asserted in U-Boot (because the code in U-Boot issues reset via this pin
> -via GPIO mode), and then in Linux by the obscure and undocumented
> -mechanism described by the above mentioned commit.
> -
> -We want to issue PERST# signal in a known way, therefore this patch
> -changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
> -reset-gpios property to the PCIe node in device tree files of
> -EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
> -has this property and uDPU does not have a PCIe port).
> -
> -Signed-off-by: Marek Behún <marek.behun@nic.cz>
> -Cc: Remi Pommarel <repk@triplefau.lt>
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-db.dts           | 3 +++
> - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 +
> - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 4 ----
> - arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 2 +-
> - 4 files changed, 5 insertions(+), 5 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> -@@ -128,6 +128,9 @@
> -
> - /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe
> */
> - &pcie0 {
> -+	pinctrl-names = "default";
> -+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
> -+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> - 	status = "okay";
> - };
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -@@ -59,6 +59,7 @@
> - 	phys = <&comphy1 0>;
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
> -+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> - };
> -
> - /* J6 */
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -@@ -127,10 +127,6 @@
> - 	};
> - };
> -
> --&pcie_reset_pins {
> --	function = "gpio";
> --};
> --
> - &pcie0 {
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
> ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -@@ -318,7 +318,7 @@
> -
> - 				pcie_reset_pins: pcie-reset-pins {
> - 					groups = "pcie1";
> --					function = "pcie";
> -+					function = "gpio";
> - 				};
> -
> - 				pcie_clkreq_pins: pcie-clkreq-pins {
> diff --git a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-
> 37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-
> 5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
> deleted file mode 100644
> index b851a39a39..0000000000
> --- a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-
> Move-PCIe-comphy-handl.patch
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
> -Date: Thu, 30 Apr 2020 10:06:24 +0200
> -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy
> handle
> - property
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Move the comphy handle property of the PCIe node from board specific
> -device tree files (EspressoBin and Turris Mox) to the generic
> -armada-37xx.dtsi.
> -
> -This is correct since this is the only possible PCIe PHY configuration
> -on Armada 37xx, so when PCIe is enabled on any board, this handle is
> -correct.
> -
> -Signed-off-by: Marek Behún <marek.behun@nic.cz>
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
> - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 1 -
> - arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 1 +
> - 3 files changed, 1 insertion(+), 2 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -@@ -56,7 +56,6 @@
> - /* J9 */
> - &pcie0 {
> - 	status = "okay";
> --	phys = <&comphy1 0>;
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
> - 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -@@ -133,7 +133,6 @@
> - 	status = "okay";
> - 	max-link-speed = <2>;
> - 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> --	phys = <&comphy1 0>;
> -
> - 	/* enabled by U-Boot if PCIe module is present */
> - 	status = "disabled";
> ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -@@ -494,6 +494,7 @@
> - 					<0 0 0 2 &pcie_intc 1>,
> - 					<0 0 0 3 &pcie_intc 2>,
> - 					<0 0 0 4 &pcie_intc 3>;
> -+			phys = <&comphy1 0>;
> - 			pcie_intc: interrupt-controller {
> - 				interrupt-controller;
> - 				#interrupt-cells = <1>;
> diff --git a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-
> 37xx-Move-PCIe-max-link-spe.patch b/target/linux/mvebu/patches-
> 5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
> deleted file mode 100644
> index 4442a5ac15..0000000000
> --- a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-
> Move-PCIe-max-link-spe.patch
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -From 1b5a2dd9e266d78d5fddd7e6b116e47ba9577b5e Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Thu, 30 Apr 2020 10:06:25 +0200
> -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe max-link-
> speed
> - property
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Move the max-link-speed property of the PCIe node from board specific
> -device tree files to the generic armada-37xx.dtsi.
> -
> -Armada 37xx supports only PCIe gen2 speed so max-link-speed property
> -should be in the generic armada-37xx.dtsi file.
> -
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
> - arch/arm64/boot/dts/marvell/armada-37xx.dtsi           | 1 +
> - 2 files changed, 1 insertion(+), 1 deletion(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> -@@ -131,7 +131,6 @@
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
> - 	status = "okay";
> --	max-link-speed = <2>;
> - 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
> -
> - 	/* enabled by U-Boot if PCIe module is present */
> ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -@@ -494,6 +494,7 @@
> - 					<0 0 0 2 &pcie_intc 1>,
> - 					<0 0 0 3 &pcie_intc 2>,
> - 					<0 0 0 4 &pcie_intc 3>;
> -+			max-link-speed = <2>;
> - 			phys = <&comphy1 0>;
> - 			pcie_intc: interrupt-controller {
> - 				interrupt-controller;
> diff --git a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-
> bus-recovery.patch b/target/linux/mvebu/patches-5.4/023-arm64-dts-add-
> uDPU-i2c-bus-recovery.patch
> deleted file mode 100644
> index 818fce85a8..0000000000
> --- a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-
> recovery.patch
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@armlinux.org.uk>
> -Date: Wed, 6 May 2020 10:40:37 +0100
> -Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery
> -
> -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> -Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - .../boot/dts/marvell/armada-3720-uDPU.dts     | 22 +++++++++++++++++--
> - 1 file changed, 20 insertions(+), 2 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -@@ -117,18 +117,36 @@
> - 	};
> - };
> -
> -+&pinctrl_nb {
> -+	i2c1_recovery_pins: i2c1-recovery-pins {
> -+		groups = "i2c1";
> -+		function = "gpio";
> -+	};
> -+
> -+	i2c2_recovery_pins: i2c2-recovery-pins {
> -+		groups = "i2c2";
> -+		function = "gpio";
> -+	};
> -+};
> -+
> - &i2c0 {
> - 	status = "okay";
> --	pinctrl-names = "default";
> -+	pinctrl-names = "default", "recovery";
> - 	pinctrl-0 = <&i2c1_pins>;
> -+	pinctrl-1 = <&i2c1_recovery_pins>;
> - 	/delete-property/mrvl,i2c-fast-mode;
> -+	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> -+	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH |
> GPIO_OPEN_DRAIN)>;
> - };
> -
> - &i2c1 {
> - 	status = "okay";
> --	pinctrl-names = "default";
> -+	pinctrl-names = "default", "recovery";
> - 	pinctrl-0 = <&i2c2_pins>;
> -+	pinctrl-1 = <&i2c2_recovery_pins>;
> - 	/delete-property/mrvl,i2c-fast-mode;
> -+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> -+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH |
> GPIO_OPEN_DRAIN)>;
> -
> - 	lm75@48 {
> - 		status = "okay";
> diff --git a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-
> PCIe-registers-if-no-card-c.patch b/target/linux/mvebu/patches-5.4/024-
> PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
> deleted file mode 100644
> index 04803c90d8..0000000000
> --- a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-
> registers-if-no-card-c.patch
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -From 70e380250c3621c55ff218cbaf2272830d9dbb1d Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Thu, 2 Jul 2020 10:30:36 +0200
> -Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card
> - connected
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -When there is no PCIe card connected and advk_pcie_rd_conf() or
> -advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
> -root bridge, the aardvark driver throws the following error message:
> -
> -  advk-pcie d0070000.pcie: config read/write timed out
> -
> -Obviously accessing PCIe registers of disconnected card is not possible.
> -
> -Extend check in advk_pcie_valid_device() function for validating
> -availability of PCIe bus. If PCIe link is down, then the device is marked
> -as Not Found and the driver does not try to access these registers.
> -
> -This is just an optimization to prevent accessing PCIe registers when card
> -is disconnected. Trying to access PCIe registers of disconnected card does
> -not cause any crash, kernel just needs to wait for a timeout. So if card
> -disappear immediately after checking for PCIe link (before accessing PCIe
> -registers), it does not cause any problems.
> -
> -Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ----
> - drivers/pci/controller/pci-aardvark.c | 7 +++++++
> - 1 file changed, 7 insertions(+)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -650,6 +650,13 @@ static bool advk_pcie_valid_device(struc
> - 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
> - 		return false;
> -
> -+	/*
> -+	 * If the link goes down after we check for link-up, nothing bad
> -+	 * happens but the config access times out.
> -+	 */
> -+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
> -+		return false;
> -+
> - 	return true;
> - }
> -
> diff --git a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-
> LinkStation-power-off.patch b/target/linux/mvebu/patches-5.4/025-power-
> reset-add-driver-for-LinkStation-power-off.patch
> deleted file mode 100644
> index 64ea26559e..0000000000
> --- a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-
> LinkStation-power-off.patch
> +++ /dev/null
> @@ -1,207 +0,0 @@
> -From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?=
> <dgcbueu@gmail.com>
> -Date: Wed, 15 Jul 2020 15:35:14 +0200
> -Subject: [PATCH] power: reset: add driver for LinkStation power off
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Some Buffalo LinkStations perform the power off operation, at restart
> -time, depending on the state of an output pin (LED2/INTn) at the ethernet
> -PHY. This pin is also used to wake the machine when a WoL packet is
> -received by the PHY.
> -
> -The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU),
> -and other models. Without it, the board remains forever halted if a
> -power off command is executed, unless the PSU is disconnected and
> -connected again.
> -
> -Add the driver to provide the power off function and also make the WoL
> -feature to be available.
> -
> -Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
> -Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ----
> - drivers/power/reset/Kconfig                |  11 ++
> - drivers/power/reset/Makefile               |   1 +
> - drivers/power/reset/linkstation-poweroff.c | 136
> +++++++++++++++++++++
> - 3 files changed, 148 insertions(+)
> - create mode 100644 drivers/power/reset/linkstation-poweroff.c
> -
> ---- a/drivers/power/reset/Kconfig
> -+++ b/drivers/power/reset/Kconfig
> -@@ -99,6 +99,17 @@ config POWER_RESET_HISI
> - 	help
> - 	  Reboot support for Hisilicon boards.
> -
> -+config POWER_RESET_LINKSTATION
> -+	tristate "Buffalo LinkStation power-off driver"
> -+	depends on ARCH_MVEBU || COMPILE_TEST
> -+	depends on OF_MDIO && PHYLIB
> -+	help
> -+	  This driver supports turning off some Buffalo LinkStations by
> -+	  setting an output pin at the ethernet PHY to the correct state.
> -+	  It also makes the device compatible with the WoL function.
> -+
> -+	  Say Y here if you have a Buffalo LinkStation LS421D/E.
> -+
> - config POWER_RESET_MSM
> - 	bool "Qualcomm MSM power-off driver"
> - 	depends on ARCH_QCOM
> ---- a/drivers/power/reset/Makefile
> -+++ b/drivers/power/reset/Makefile
> -@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF
> - obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> - obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
> - obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> -+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
> - obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> - obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
> - obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
> ---- /dev/null
> -+++ b/drivers/power/reset/linkstation-poweroff.c
> -@@ -0,0 +1,144 @@
> -+// SPDX-License-Identifier: GPL-2.0
> -+/*
> -+ * LinkStation power off restart driver
> -+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/notifier.h>
> -+#include <linux/of.h>
> -+#include <linux/of_mdio.h>
> -+#include <linux/of_platform.h>
> -+#include <linux/reboot.h>
> -+#include <linux/phy.h>
> -+
> -+/* Defines from the eth phy Marvell driver */
> -+#define MII_MARVELL_COPPER_PAGE		0
> -+#define MII_MARVELL_LED_PAGE		3
> -+#define MII_MARVELL_WOL_PAGE		17
> -+#define MII_MARVELL_PHY_PAGE		22
> -+
> -+#define MII_PHY_LED_CTRL		16
> -+#define MII_88E1318S_PHY_LED_TCR	18
> -+#define MII_88E1318S_PHY_WOL_CTRL	16
> -+#define MII_M1011_IEVENT		19
> -+
> -+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE		BIT(7)
> -+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
> -+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS	BIT(12)
> -+#define LED2_FORCE_ON					(0x8 << 8)
> -+#define LEDMASK
> 	GENMASK(11,8)
> -+
> -+static struct phy_device *phydev;
> -+
> -+static void mvphy_reg_intn(u16 data)
> -+{
> -+	int rc = 0, saved_page;
> -+
> -+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
> -+	if (saved_page < 0)
> -+		goto err;
> -+
> -+	/* Force manual LED2 control to let INTn work */
> -+	__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK,
> LED2_FORCE_ON);
> -+
> -+	/* Set the LED[2]/INTn pin to the required state */
> -+	__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
> -+		     MII_88E1318S_PHY_LED_TCR_FORCE_INT,
> -+		     MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
> -+
> -+	if (!data) {
> -+		/* Clear interrupts to ensure INTn won't be holded in high
> state */
> -+		__phy_write(phydev, MII_MARVELL_PHY_PAGE,
> MII_MARVELL_COPPER_PAGE);
> -+		__phy_read(phydev, MII_M1011_IEVENT);
> -+
> -+		/* If WOL was enabled and a magic packet was received
> before powering
> -+		 * off, we won't be able to wake up by sending another magic
> packet.
> -+		 * Clear WOL status.
> -+		 */
> -+		__phy_write(phydev, MII_MARVELL_PHY_PAGE,
> MII_MARVELL_WOL_PAGE);
> -+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
> -+
> MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
> -+	}
> -+err:
> -+	rc = phy_restore_page(phydev, saved_page, rc);
> -+	if (rc < 0)
> -+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n",
> rc);
> -+
> -+	if (!data) {
> -+		/* Slow down the PHY to save energy */
> -+		rc= phy_speed_down(phydev, false);
> -+		if (rc < 0)
> -+			dev_err(&phydev->mdio.dev, "PHY speed down
> failed, %d\n", rc);
> -+	}
> -+}
> -+
> -+static int linkstation_reboot_notifier(struct notifier_block *nb,
> -+				       unsigned long action, void *unused)
> -+{
> -+	if (action == SYS_RESTART)
> -+		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
> -+
> -+	return NOTIFY_DONE;
> -+}
> -+
> -+static struct notifier_block linkstation_reboot_nb = {
> -+	.notifier_call = linkstation_reboot_notifier,
> -+};
> -+
> -+static void linkstation_poweroff(void)
> -+{
> -+	unregister_reboot_notifier(&linkstation_reboot_nb);
> -+	mvphy_reg_intn(0);
> -+
> -+	kernel_restart("Power off");
> -+}
> -+
> -+static const struct of_device_id ls_poweroff_of_match[] = {
> -+	{ .compatible = "buffalo,ls421d" },
> -+	{ .compatible = "buffalo,ls421de" },
> -+	{ },
> -+};
> -+
> -+static int __init linkstation_poweroff_init(void)
> -+{
> -+	struct mii_bus *bus;
> -+	struct device_node *dn;
> -+
> -+	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
> -+	if (!dn)
> -+		return -ENODEV;
> -+	of_node_put(dn);
> -+
> -+	dn = of_find_node_by_name(NULL, "mdio");
> -+	if (!dn)
> -+		return -ENODEV;
> -+
> -+	bus = of_mdio_find_bus(dn);
> -+	of_node_put(dn);
> -+	if (!bus)
> -+		return -EPROBE_DEFER;
> -+
> -+	phydev = phy_find_first(bus);
> -+	if (!phydev)
> -+		return -EPROBE_DEFER;
> -+
> -+	register_reboot_notifier(&linkstation_reboot_nb);
> -+	pm_power_off = linkstation_poweroff;
> -+
> -+	pr_info("LinkStation power off driver registered\n");
> -+	return 0;
> -+}
> -+
> -+static void __exit linkstation_poweroff_exit(void)
> -+{
> -+	pm_power_off = NULL;
> -+	unregister_reboot_notifier(&linkstation_reboot_nb);
> -+}
> -+
> -+module_init(linkstation_poweroff_init);
> -+module_exit(linkstation_poweroff_exit);
> -+
> -+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
> -+MODULE_DESCRIPTION("LinkStation power off driver");
> -+MODULE_LICENSE("GPL v2");
> diff --git a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-
> initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-
> 5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
> deleted file mode 100644
> index ff67c9c02f..0000000000
> --- a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-
> with-old-Marvell-s-A.patch
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -From b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Wed, 2 Sep 2020 16:43:44 +0200
> -Subject: [PATCH] PCI: aardvark: Fix initialization with old Marvell's Arm
> - Trusted Firmware
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Old ATF automatically power on pcie phy and does not provide SMC call for
> -phy power on functionality which leads to aardvark initialization failure:
> -
> -[    0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call,
> try updating your firmware
> -[    0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95
> -[    0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95)
> -[    0.351160] advk-pcie: probe of d0070000.pcie failed with error -95
> -
> -This patch fixes above failure by ignoring 'not supported' error in
> -aardvark driver. In this case it is expected that phy is already power on.
> -
> -Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org
> -Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> -Reviewed-by: Rob Herring <robh@kernel.org>
> -Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy:
> Convert internal SMCC firmware return codes to errno
> ----
> - drivers/pci/controller/pci-aardvark.c | 4 +++-
> - 1 file changed, 3 insertions(+), 1 deletion(-)
> -
> ---- a/drivers/pci/controller/pci-aardvark.c
> -+++ b/drivers/pci/controller/pci-aardvark.c
> -@@ -1165,7 +1165,9 @@ static int advk_pcie_enable_phy(struct a
> - 	}
> -
> - 	ret = phy_power_on(pcie->phy);
> --	if (ret) {
> -+	if (ret == -EOPNOTSUPP) {
> -+		dev_warn(&pcie->pdev->dev, "PHY unsupported by
> firmware\n");
> -+	} else if (ret) {
> - 		phy_exit(pcie->phy);
> - 		return ret;
> - 	}
> diff --git a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-
> espressobin-Add-ethernet-switch-al.patch b/target/linux/mvebu/patches-
> 5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
> deleted file mode 100644
> index 927670d8b3..0000000000
> --- a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-
> Add-ethernet-switch-al.patch
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
> -Date: Mon, 7 Sep 2020 13:27:17 +0200
> -Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch
> aliases
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Espressobin boards have 3 ethernet ports and some of them got assigned
> more
> -then one MAC address. MAC addresses are stored in U-Boot environment.
> -
> -Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave
> -device") kernel can use MAC addresses from DT for particular DSA port.
> -
> -Currently Espressobin DTS file contains alias just for ethernet0.
> -
> -This patch defines additional ethernet aliases in Espressobin DTS files, so
> -bootloader can fill correct MAC address for DSA switch ports if more MAC
> -addresses were specified.
> -
> -DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
> -are used for lan ports for both Espressobin revisions (V5 and V7).
> -
> -Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
> -Cc: <stable@vger.kernel.org> # a2c7023f7075c: dsa: read mac address
> -Signed-off-by: Pali Rohár <pali@kernel.org>
> -Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> -Reviewed-by: Andre Heider <a.heider@gmail.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - .../dts/marvell/armada-3720-espressobin-v7-emmc.dts  | 10 ++++++++--
> - .../boot/dts/marvell/armada-3720-espressobin-v7.dts  | 10 ++++++++--
> - 3 files changed, 24 insertions(+), 8 deletions(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-
> emmc.dts
> -@@ -15,16 +15,22 @@
> - 	compatible = "globalscale,espressobin-v7-emmc",
> "globalscale,espressobin-v7",
> - 		     "globalscale,espressobin", "marvell,armada3720",
> - 		     "marvell,armada3710";
> -+
> -+	aliases {
> -+		/* ethernet1 is wan port */
> -+		ethernet1 = &switch0port3;
> -+		ethernet3 = &switch0port1;
> -+	};
> - };
> -
> - &ports {
> --	port@1 {
> -+	switch0port1: port@1 {
> - 		reg = <1>;
> - 		label = "lan1";
> - 		phy-handle = <&switch0phy0>;
> - 	};
> -
> --	port@3 {
> -+	switch0port3: port@3 {
> - 		reg = <3>;
> - 		label = "wan";
> - 		phy-handle = <&switch0phy2>;
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> -@@ -14,16 +14,22 @@
> - 	model = "Globalscale Marvell ESPRESSOBin Board V7";
> - 	compatible = "globalscale,espressobin-v7",
> "globalscale,espressobin",
> - 		     "marvell,armada3720", "marvell,armada3710";
> -+
> -+	aliases {
> -+		/* ethernet1 is wan port */
> -+		ethernet1 = &switch0port3;
> -+		ethernet3 = &switch0port1;
> -+	};
> - };
> -
> - &ports {
> --	port@1 {
> -+	switch0port1: port@1 {
> - 		reg = <1>;
> - 		label = "lan1";
> - 		phy-handle = <&switch0phy0>;
> - 	};
> -
> --	port@3 {
> -+	switch0port3: port@3 {
> - 		reg = <3>;
> - 		label = "wan";
> - 		phy-handle = <&switch0phy2>;
> diff --git a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-
> singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.4/028-
> arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
> deleted file mode 100644
> index c3abae60a6..0000000000
> --- a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-
> heartbeat-LED.patch
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00
> 2001
> -From: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Date: Tue, 10 Nov 2020 16:38:31 +0100
> -Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
> -
> -With board revision 1.3, SolidRun moved the power LED to the middle of
> -the board. In old place of power LED a GPIO controllable heartbeat LED
> -was added. This commit only touches Single Shot variant, since only this
> -variant is all revision 1.3.
> -
> -Note:
> -This is slightly modified patch. Some boards could be placed in an
> -enclosure, so the LED18 is enabled by default, since that'll be the only
> -visible indicator that the board is operating.
> -
> -Reported-by: Alexandra Alth <alexandra@alth.de>
> -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - .../marvell/armada-8040-mcbin-singleshot.dts  | 22
> +++++++++++++++++++
> - 1 file changed, 22 insertions(+)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> -@@ -5,6 +5,8 @@
> -  * Device Tree file for MACCHIATOBin Armada 8040 community board
> platform
> -  */
> -
> -+#include <dt-bindings/leds/common.h>
> -+
> - #include "armada-8040-mcbin.dtsi"
> -
> - / {
> -@@ -12,6 +14,20 @@
> - 	compatible = "marvell,armada8040-mcbin-singleshot",
> - 			"marvell,armada8040-mcbin", "marvell,armada8040",
> - 			"marvell,armada-ap806-quad", "marvell,armada-
> ap806";
> -+
> -+	leds {
> -+		compatible = "gpio-leds";
> -+		pinctrl-0 = <&cp0_led18_pins>;
> -+		pinctrl-names = "default";
> -+
> -+		led18 {
> -+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
> -+			function = LED_FUNCTION_HEARTBEAT;
> -+			color = <LED_COLOR_ID_GREEN>;
> -+			linux,default-trigger = "heartbeat";
> -+			default-state = "on";
> -+		};
> -+	};
> - };
> -
> - &cp0_eth0 {
> -@@ -27,3 +43,10 @@
> - 	managed = "in-band-status";
> - 	sfp = <&sfp_eth1>;
> - };
> -+
> -+&cp0_pinctrl {
> -+	cp0_led18_pins: led18-pins {
> -+		marvell,pins = "mpp33";
> -+		marvell,function = "gpio";
> -+	};
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-
> enable-HW-buffer-management.patch b/target/linux/mvebu/patches-
> 5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
> deleted file mode 100644
> index 7a4b511998..0000000000
> --- a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-
> HW-buffer-management.patch
> +++ /dev/null
> @@ -1,74 +0,0 @@
> -From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
> -Date: Sun, 15 Nov 2020 14:59:17 +0100
> -Subject: ARM: dts: turris-omnia: enable HW buffer management
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -The buffer manager is available on Turris Omnia but needs to be
> -described in device-tree to be used.
> -
> -Signed-off-by: Marek Behún <kabel@kernel.org>
> -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> -Cc: linux-arm-kernel@lists.infradead.org
> -Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> -Cc: Jason Cooper <jason@lakedaemon.net>
> -Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> -Cc: Andreas Färber <afaerber@suse.de>
> -Cc: Andrew Lunn <andrew@lunn.ch>
> -Cc: Rob Herring <robh+dt@kernel.org>
> -Cc: devicetree@vger.kernel.org
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 17
> +++++++++++++++++
> - 1 file changed, 17 insertions(+)
> -
> -(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -84,12 +84,23 @@
> - 	};
> - };
> -
> -+&bm {
> -+	status = "okay";
> -+};
> -+
> -+&bm_bppi {
> -+	status = "okay";
> -+};
> -+
> - /* Connected to 88E6176 switch, port 6 */
> - &eth0 {
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&ge0_rgmii_pins>;
> - 	status = "okay";
> - 	phy-mode = "rgmii";
> -+	buffer-manager = <&bm>;
> -+	bm,pool-long = <0>;
> -+	bm,pool-short = <3>;
> -
> - 	fixed-link {
> - 		speed = <1000>;
> -@@ -103,6 +114,9 @@
> - 	pinctrl-0 = <&ge1_rgmii_pins>;
> - 	status = "okay";
> - 	phy-mode = "rgmii";
> -+	buffer-manager = <&bm>;
> -+	bm,pool-long = <1>;
> -+	bm,pool-short = <3>;
> -
> - 	fixed-link {
> - 		speed = <1000>;
> -@@ -115,6 +129,9 @@
> - 	status = "okay";
> - 	phy-mode = "sgmii";
> - 	phy = <&phy1>;
> -+	buffer-manager = <&bm>;
> -+	bm,pool-long = <2>;
> -+	bm,pool-short = <3>;
> - };
> -
> - &i2c0 {
> diff --git a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-
> comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.4/030-ARM-
> dts-turris-omnia-add-comphy-handle-to-eth2.patch
> deleted file mode 100644
> index 99ed07e13b..0000000000
> --- a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-
> comphy-handle-to-eth2.patch
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
> -Date: Sun, 15 Nov 2020 14:59:18 +0100
> -Subject: ARM: dts: turris-omnia: add comphy handle to eth2
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
> -be able to switch between 1G and 2.5G modes the comphy link has to be
> -defined.
> -
> -Signed-off-by: Marek Behún <kabel@kernel.org>
> -Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
> -Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> -Reviewed-by: Andreas Färber <afaerber@suse.de>
> -Cc: linux-arm-kernel@lists.infradead.org
> -Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> -Cc: Jason Cooper <jason@lakedaemon.net>
> -Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> -Cc: Rob Herring <robh+dt@kernel.org>
> -Cc: devicetree@vger.kernel.org
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
> - 1 file changed, 1 insertion(+)
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -129,6 +129,7 @@
> - 	status = "okay";
> - 	phy-mode = "sgmii";
> - 	phy = <&phy1>;
> -+	phys = <&comphy5 2>;
> - 	buffer-manager = <&bm>;
> - 	bm,pool-long = <2>;
> - 	bm,pool-short = <3>;
> diff --git a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-
> describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.4/031-
> ARM-dts-turris-omnia-describe-switch-interrupt.patch
> deleted file mode 100644
> index 4bbd80aac4..0000000000
> --- a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-
> switch-interrupt.patch
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
> -Date: Sun, 15 Nov 2020 14:59:19 +0100
> -Subject: ARM: dts: turris-omnia: describe switch interrupt
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Describe switch interrupt for Turris Omnia so that the CPU does not have
> -to poll the switch. We also need to to set mpp45 pin to gpio function
> -for this.
> -
> -Signed-off-by: Marek Behún <kabel@kernel.org>
> -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> -Cc: linux-arm-kernel@lists.infradead.org
> -Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> -Cc: Jason Cooper <jason@lakedaemon.net>
> -Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> -Cc: Andreas Färber <afaerber@suse.de>
> -Cc: Andrew Lunn <andrew@lunn.ch>
> -Cc: Rob Herring <robh+dt@kernel.org>
> -Cc: devicetree@vger.kernel.org
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
> - 1 file changed, 11 insertions(+), 1 deletion(-)
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -261,13 +261,18 @@
> -
> - 	/* Switch MV88E6176 at address 0x10 */
> - 	switch@10 {
> -+		pinctrl-names = "default";
> -+		pinctrl-0 = <&swint_pins>;
> - 		compatible = "marvell,mv88e6085";
> - 		#address-cells = <1>;
> - 		#size-cells = <0>;
> --		dsa,member = <0 0>;
> -
> -+		dsa,member = <0 0>;
> - 		reg = <0x10>;
> -
> -+		interrupt-parent = <&gpio1>;
> -+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> -+
> - 		ports {
> - 			#address-cells = <1>;
> - 			#size-cells = <0>;
> -@@ -320,6 +325,11 @@
> - 		marvell,function = "gpio";
> - 	};
> -
> -+	swint_pins: swint-pins {
> -+		marvell,pins = "mpp45";
> -+		marvell,function = "gpio";
> -+	};
> -+
> - 	spi0cs0_pins: spi0cs0-pins {
> - 		marvell,pins = "mpp25";
> - 		marvell,function = "spi0";
> diff --git a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-
> SFP-node.patch b/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-
> omnia-add-SFP-node.patch
> deleted file mode 100644
> index 2447a4e240..0000000000
> --- a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-
> node.patch
> +++ /dev/null
> @@ -1,90 +0,0 @@
> -From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
> -Date: Mon, 16 Nov 2020 13:24:22 +0100
> -Subject: ARM: dts: turris-omnia: add SFP node
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Turris Omnia has an SFP cage that, together with WAN PHY, is connected
> -to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
> -the multiplexor switches the SerDes signal from PHY to SFP.
> -
> -Describe the SFP cage, but leave it disabled. Until phylink has support
> -for such configuration, we are leaving it to U-Boot to enable SFP and
> -disable WAN PHY at boot time depending on whether a SFP module is
> -present.
> -
> -Signed-off-by: Marek Behún <kabel@kernel.org>
> -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> -Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> -Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
> -Cc: linux-arm-kernel@lists.infradead.org
> -Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> -Cc: Jason Cooper <jason@lakedaemon.net>
> -Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> -Cc: Andreas Färber <afaerber@suse.de>
> -Cc: Rob Herring <robh+dt@kernel.org>
> -Cc: devicetree@vger.kernel.org
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 30
> ++++++++++++++++++++++++++-
> - 1 file changed, 29 insertions(+), 1 deletion(-)
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -82,6 +82,24 @@
> - 			};
> - 		};
> - 	};
> -+
> -+	sfp: sfp {
> -+		compatible = "sff,sfp";
> -+		i2c-bus = <&sfp_i2c>;
> -+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
> -+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
> -+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
> -+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
> -+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
> -+		maximum-power-milliwatt = <3000>;
> -+
> -+		/*
> -+		 * For now this has to be enabled at boot time by U-Boot
> when
> -+		 * a SFP module is present. Read more in the comment in the
> -+		 * eth2 node below.
> -+		 */
> -+		status = "disabled";
> -+	};
> - };
> -
> - &bm {
> -@@ -126,10 +144,20 @@
> -
> - /* WAN port */
> - &eth2 {
> -+	/*
> -+	 * eth2 is connected via a multiplexor to both the SFP cage and to
> -+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage
> when
> -+	 * a SFP module is present, as determined by the mode-def0 GPIO.
> -+	 *
> -+	 * Until kernel supports this configuration properly, in case SFP
> module
> -+	 * is present, U-Boot has to enable the sfp node above, remove phy
> -+	 * handle and add managed = "in-band-status" property.
> -+	 */
> - 	status = "okay";
> - 	phy-mode = "sgmii";
> - 	phy = <&phy1>;
> - 	phys = <&comphy5 2>;
> -+	sfp = <&sfp>;
> - 	buffer-manager = <&bm>;
> - 	bm,pool-long = <2>;
> - 	bm,pool-short = <3>;
> -@@ -195,7 +223,7 @@
> - 			/* routed to PCIe2 connector (CN62A) */
> - 		};
> -
> --		i2c@4 {
> -+		sfp_i2c: i2c@4 {
> - 			#address-cells = <1>;
> - 			#size-cells = <0>;
> - 			reg = <4>;
> diff --git a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-
> update-ethernet-phy-node-and-handle-name.patch
> b/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-
> ethernet-phy-node-and-handle-name.patch
> deleted file mode 100644
> index 5ceef5dc46..0000000000
> --- a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-
> ethernet-phy-node-and-handle-name.patch
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00
> 2001
> -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
> -Date: Sun, 15 Nov 2020 14:59:22 +0100
> -Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle
> name
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Use property name `phy-handle` instead of the deprecated `phy` to
> -connect eth2 to the PHY.
> -Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
> -incorrect according to device-tree bindings documentation.
> -Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
> -needed. Kernel can read the PHY identifier itself.
> -
> -Signed-off-by: Marek Behún <kabel@kernel.org>
> -Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> -Cc: linux-arm-kernel@lists.infradead.org
> -Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> -Cc: Jason Cooper <jason@lakedaemon.net>
> -Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> -Cc: Andreas Färber <afaerber@suse.de>
> -Cc: Rob Herring <robh+dt@kernel.org>
> -Cc: devicetree@vger.kernel.org
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
> - 1 file changed, 3 insertions(+), 3 deletions(-)
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -155,7 +155,7 @@
> - 	 */
> - 	status = "okay";
> - 	phy-mode = "sgmii";
> --	phy = <&phy1>;
> -+	phy-handle = <&phy1>;
> - 	phys = <&comphy5 2>;
> - 	sfp = <&sfp>;
> - 	buffer-manager = <&bm>;
> -@@ -278,9 +278,9 @@
> - 	pinctrl-0 = <&mdio_pins>;
> - 	status = "okay";
> -
> --	phy1: phy@1 {
> -+	phy1: ethernet-phy@1 {
> - 		status = "okay";
> --		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-
> ieee802.3-c22";
> -+		compatible = "ethernet-phy-ieee802.3-c22";
> - 		reg = <1>;
> - 		marvell,reg-init = <3 18 0 0x4985>;
> -
> diff --git a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-
> hardware-buffer-management.patch b/target/linux/mvebu/patches-
> 5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
> deleted file mode 100644
> index 4283a61341..0000000000
> --- a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-
> hardware-buffer-management.patch
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00
> 2001
> -From: Rui Salvaterra <rsalvaterra@gmail.com>
> -Date: Wed, 17 Feb 2021 15:30:38 +0000
> -Subject: ARM: dts: turris-omnia: fix hardware buffer management
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Hardware buffer management has never worked on the Turris Omnia, as
> the
> -required MBus window hadn't been reserved. Fix thusly.
> -
> -Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer
> management")
> -
> -Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
> -Reviewed-by: Marek Behún <kabel@kernel.org>
> -Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ----
> - arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
> - 1 file changed, 2 insertions(+), 1 deletion(-)
> -
> ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> -@@ -31,7 +31,8 @@
> - 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> - 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
> - 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
> --			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
> -+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
> -+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
> -
> - 		internal-regs {
> -
> diff --git a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-
> s-kernel-arguments.patch b/target/linux/mvebu/patches-5.4/300-mvebu-
> Mangle-bootloader-s-kernel-arguments.patch
> deleted file mode 100644
> index fd60cdb322..0000000000
> --- a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-
> kernel-arguments.patch
> +++ /dev/null
> @@ -1,208 +0,0 @@
> -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00
> 2001
> -From: Adrian Panella <ianchi74@outlook.com>
> -Date: Thu, 9 Mar 2017 09:37:17 +0100
> -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
> -
> -The command-line arguments provided by the boot loader will be
> -appended to a new device tree property: bootloader-args.
> -If there is a property "append-rootblock" in DT under /chosen
> -and a root= option in bootloaders command line it will be parsed
> -and added to DT bootargs with the form: <append-rootblock>XX.
> -Only command line ATAG will be processed, the rest of the ATAGs
> -sent by bootloader will be ignored.
> -This is usefull in dual boot systems, to get the current root partition
> -without afecting the rest of the system.
> -
> -Signed-off-by: Adrian Panella <ianchi74@outlook.com>
> -
> -This patch has been modified to be mvebu specific. The original patch
> -did not pass the bootloader cmdline on if no append-rootblock stanza
> -was found, resulting in blank cmdline and failure to boot.
> -
> -Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
> ----
> - arch/arm/Kconfig                        | 11 ++++
> - arch/arm/boot/compressed/atags_to_fdt.c | 85
> ++++++++++++++++++++++++-
> - init/main.c                             | 16 +++++
> - 3 files changed, 111 insertions(+), 1 deletion(-)
> -
> ---- a/arch/arm/Kconfig
> -+++ b/arch/arm/Kconfig
> -@@ -1827,6 +1827,17 @@ config
> ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
> - 	  The command-line arguments provided by the boot loader will be
> - 	  appended to the the device tree bootargs property.
> -
> -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
> -+	bool "Append rootblock parsing bootloader's kernel arguments"
> -+	help
> -+	  The command-line arguments provided by the boot loader will be
> -+	  appended to a new device tree property: bootloader-args.
> -+	  If there is a property "append-rootblock" in DT under /chosen
> -+	  and a root= option in bootloaders command line it will be parsed
> -+	  and added to DT bootargs with the form: <append-rootblock>XX.
> -+	  Only command line ATAG will be processed, the rest of the ATAGs
> -+	  sent by bootloader will be ignored.
> -+
> - endchoice
> -
> - config CMDLINE
> ---- a/arch/arm/boot/compressed/atags_to_fdt.c
> -+++ b/arch/arm/boot/compressed/atags_to_fdt.c
> -@@ -4,6 +4,8 @@
> -
> - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
> - #define do_extend_cmdline 1
> -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
> -+#define do_extend_cmdline 1
> - #else
> - #define do_extend_cmdline 0
> - #endif
> -@@ -67,6 +69,72 @@ static uint32_t get_cell_size(const void
> - 	return cell_size;
> - }
> -
> -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
> -+
> -+static char *append_rootblock(char *dest, const char *str, int len, void
> *fdt)
> -+{
> -+	char *ptr, *end;
> -+	char *root="root=";
> -+	int i, l;
> -+	const char *rootblock;
> -+
> -+	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
> -+	ptr = str - 1;
> -+
> -+	do {
> -+		//first find an 'r' at the begining or after a space
> -+		do {
> -+			ptr++;
> -+			ptr = strchr(ptr, 'r');
> -+			if (!ptr)
> -+				goto no_append;
> -+
> -+		} while (ptr != str && *(ptr-1) != ' ');
> -+
> -+		//then check for the rest
> -+		for(i = 1; i <= 4; i++)
> -+			if(*(ptr+i) != *(root+i)) break;
> -+
> -+	} while (i != 5);
> -+
> -+	end = strchr(ptr, ' ');
> -+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
> -+
> -+	//find partition number (assumes format root=/dev/mtdXX |
> /dev/mtdblockXX | yy:XX )
> -+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
> -+	ptr = end + 1;
> -+
> -+	/* if append-rootblock property is set use it to append to command
> line */
> -+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
> -+	if (rootblock == NULL)
> -+		goto no_append;
> -+
> -+	if (*dest != ' ') {
> -+		*dest = ' ';
> -+		dest++;
> -+		len++;
> -+	}
> -+
> -+	if (len + l + i <= COMMAND_LINE_SIZE) {
> -+		memcpy(dest, rootblock, l);
> -+		dest += l - 1;
> -+		memcpy(dest, ptr, i);
> -+		dest += i;
> -+	}
> -+
> -+	return dest;
> -+
> -+no_append:
> -+	len = strlen(str);
> -+	if (len + 1 < COMMAND_LINE_SIZE) {
> -+		memcpy(dest, str, len);
> -+		dest += len;
> -+	}
> -+
> -+	return dest;
> -+}
> -+#endif
> -+
> - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
> - {
> - 	char cmdline[COMMAND_LINE_SIZE];
> -@@ -86,12 +154,21 @@ static void merge_fdt_bootargs(void *fdt
> -
> - 	/* and append the ATAG_CMDLINE */
> - 	if (fdt_cmdline) {
> -+
> -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
> -+		//save original bootloader args
> -+		//and append ubi.mtd with root partition number to current
> cmdline
> -+		setprop_string(fdt, "/chosen", "bootloader-args",
> fdt_cmdline);
> -+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
> -+
> -+#else
> - 		len = strlen(fdt_cmdline);
> - 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
> - 			*ptr++ = ' ';
> - 			memcpy(ptr, fdt_cmdline, len);
> - 			ptr += len;
> - 		}
> -+#endif
> - 	}
> - 	*ptr = '\0';
> -
> -@@ -166,7 +243,9 @@ int atags_to_fdt(void *atag_list, void *
> - 			else
> - 				setprop_string(fdt, "/chosen", "bootargs",
> - 					       atag->u.cmdline.cmdline);
> --		} else if (atag->hdr.tag == ATAG_MEM) {
> -+		}
> -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
> -+		else if (atag->hdr.tag == ATAG_MEM) {
> - 			if (memcount >= sizeof(mem_reg_property)/4)
> - 				continue;
> - 			if (!atag->u.mem.size)
> -@@ -210,6 +289,10 @@ int atags_to_fdt(void *atag_list, void *
> - 		setprop(fdt, "/memory", "reg", mem_reg_property,
> - 			4 * memcount * memsize);
> - 	}
> -+#else
> -+
> -+	}
> -+#endif
> -
> - 	return fdt_pack(fdt);
> - }
> ---- a/init/main.c
> -+++ b/init/main.c
> -@@ -104,6 +104,10 @@
> - #define CREATE_TRACE_POINTS
> - #include <trace/events/initcall.h>
> -
> -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
> -+#include <linux/of.h>
> -+#endif
> -+
> - static int kernel_init(void *);
> -
> - extern void init_IRQ(void);
> -@@ -631,6 +635,18 @@ asmlinkage __visible void __init start_k
> - 	page_alloc_init();
> -
> - 	pr_notice("Kernel command line: %s\n", boot_command_line);
> -+
> -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
> -+	//Show bootloader's original command line for reference
> -+	if(of_chosen) {
> -+		const char *prop = of_get_property(of_chosen, "bootloader-
> args", NULL);
> -+		if(prop)
> -+			pr_notice("Bootloader command line (ignored):
> %s\n", prop);
> -+		else
> -+			pr_notice("Bootloader command line not
> present\n");
> -+	}
> -+#endif
> -+
> - 	/* parameters may set static keys */
> - 	jump_label_init();
> - 	parse_early_param();
> diff --git a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-
> libata-leds.patch b/target/linux/mvebu/patches-5.4/301-mvebu-armada-
> 38x-enable-libata-leds.patch
> deleted file mode 100644
> index b8ab700c97..0000000000
> --- a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-
> libata-leds.patch
> +++ /dev/null
> @@ -1,10 +0,0 @@
> ---- a/arch/arm/mach-mvebu/Kconfig
> -+++ b/arch/arm/mach-mvebu/Kconfig
> -@@ -69,6 +69,7 @@ config MACH_ARMADA_38X
> - 	select HAVE_SMP
> - 	select MACH_MVEBU_V7
> - 	select PINCTRL_ARMADA_38X
> -+	select ARCH_WANT_LIBATA_LEDS
> - 	help
> - 	  Say 'Y' here if you want your kernel to support boards based
> - 	  on the Marvell Armada 380/385 SoC with device tree.
> diff --git a/target/linux/mvebu/patches-5.4/302-add_powertables.patch
> b/target/linux/mvebu/patches-5.4/302-add_powertables.patch
> deleted file mode 100644
> index efbbbc7d78..0000000000
> --- a/target/linux/mvebu/patches-5.4/302-add_powertables.patch
> +++ /dev/null
> @@ -1,770 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> -@@ -212,11 +212,19 @@
> - &pcie1 {
> - 	/* Marvell 88W8864, 5GHz-only */
> - 	status = "okay";
> -+
> -+	mwlwifi {
> -+		marvell,2ghz = <0>;
> -+	};
> - };
> -
> - &pcie2 {
> - 	/* Marvell 88W8864, 2GHz-only */
> - 	status = "okay";
> -+
> -+	mwlwifi {
> -+		marvell,5ghz = <0>;
> -+	};
> - };
> -
> - &pinctrl {
> ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> -@@ -142,3 +142,205 @@
> - 		};
> - 	};
> - };
> -+
> -+&pcie1 {
> -+	mwlwifi {
> -+		marvell,chainmask = <2 2>;
> -+		marvell,powertable {
> -+			AU =
> -+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17
> 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
> -+				<149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
> -+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
> -+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
> -+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
> -+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
> -+			CA =
> -+				<36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0xf 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0xf 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0xf 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0xf 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17
> 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
> -+			CN =
> -+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16
> 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
> -+			ETSI =
> -+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
> -+				<149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
> -+			FCC =
> -+				<36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15
> 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15
> 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15
> 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17
> 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
> -+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17
> 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
> -+		};
> -+	};
> -+};
> -+
> -+&pcie2 {
> -+	mwlwifi {
> -+		marvell,chainmask = <2 2>;
> -+		marvell,powertable {
> -+			AU =
> -+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
> -+			CA =
> -+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13
> 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
> -+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14
> 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
> -+			CN =
> -+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
> -+			ETSI =
> -+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd
> 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
> -+			FCC =
> -+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13
> 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16
> 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14
> 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
> -+		};
> -+	};
> -+};
> ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> -@@ -142,3 +142,205 @@
> - 		};
> - 	};
> - };
> -+
> -+&pcie1 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+		marvell,powertable {
> -+			AU =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
> -+			CA =
> -+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
> -+			CN =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13
> 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13
> 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
> -+			ETSI =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
> -+			FCC =
> -+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12
> 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
> -+		};
> -+	};
> -+};
> -+
> -+&pcie2 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+		marvell,powertable {
> -+			AU =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			CA =
> -+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe
> 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13
> 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
> -+			CN =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			ETSI =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			FCC =
> -+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe
> 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13
> 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
> -+		};
> -+	};
> -+};
> ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> -@@ -142,3 +142,205 @@
> - 		};
> - 	};
> - };
> -+
> -+&pcie1 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+		marvell,powertable {
> -+			AU =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
> -+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16
> 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
> -+			CA =
> -+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
> -+			CN =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13
> 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13
> 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
> -+			ETSI =
> -+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
> -+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe
> 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
> -+			FCC =
> -+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12
> 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
> -+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10
> 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11
> 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10
> 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
> -+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
> -+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
> -+		};
> -+	};
> -+};
> -+
> -+&pcie2 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+		marvell,powertable {
> -+			AU =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			CA =
> -+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe
> 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13
> 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
> -+			CN =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			ETSI =
> -+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa
> 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
> -+			FCC =
> -+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe
> 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14
> 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
> -+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13
> 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
> -+		};
> -+	};
> -+};
> ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> -@@ -157,6 +157,18 @@
> - 	};
> - };
> -
> -+&pcie1 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+	};
> -+};
> -+
> -+&pcie2 {
> -+	mwlwifi {
> -+		marvell,chainmask = <4 4>;
> -+	};
> -+};
> -+
> - &sdhci {
> - 	pinctrl-names = "default";
> - 	pinctrl-0 = <&sdhci_pins>;
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -225,12 +225,100 @@
> - 	pcie@2,0 {
> - 		/* Port 0, Lane 1 */
> - 		status = "okay";
> -+
> -+		mwlwifi {
> -+			marvell,5ghz = <0>;
> -+			marvell,chainmask = <4 4>;
> -+			marvell,powertable {
> -+				FCC =
> -+					<1 0 0x17 0x11 0x11 0x11 0x10 0x10
> 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<2 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<3 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<4 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<5 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<6 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<7 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<8 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<9 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<10 0 0x17 0x16 0x16 0x16 0x16 0x16
> 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<11 0 0x17 0x11 0x11 0x11 0x11 0x11
> 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
> -+
> -+				ETSI =
> -+					<1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
> -+					<13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb
> 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
> -+			};
> -+		};
> - 	};
> -
> - 	/* Second mini-PCIe port */
> - 	pcie@3,0 {
> - 		/* Port 0, Lane 3 */
> - 		status = "okay";
> -+
> -+		mwlwifi {
> -+			marvell,2ghz = <0>;
> -+			marvell,chainmask = <4 4>;
> -+			marvell,powertable {
> -+				FCC =
> -+					<36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8
> 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+					<40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+					<44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+					<48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9
> 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
> -+					<52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
> -+					<56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
> -+					<60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
> -+					<64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf
> 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
> -+					<100 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<104 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<108 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<112 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<116 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<120 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<124 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<128 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<132 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<136 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<140 0 0x14 0x14 0x14 0x14 0x14 0x14
> 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<149 0 0x16 0x16 0x16 0x16 0x14 0x14
> 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<153 0 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<157 0 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<161 0 0x15 0x15 0x15 0x15 0x15 0x15
> 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
> -+					<165 0 0x16 0x16 0x16 0x16 0x16 0x16
> 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
> -+
> -+				ETSI =
> -+					<36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
> -+					<149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc
> 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
> -+			};
> -+		};
> - 	};
> - };
> -
> diff --git a/target/linux/mvebu/patches-5.4/303-
> linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-
> 5.4/303-linksys_hardcode_nand_ecc_settings.patch
> deleted file mode 100644
> index 89a5e19803..0000000000
> --- a/target/linux/mvebu/patches-5.4/303-
> linksys_hardcode_nand_ecc_settings.patch
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -Newer Linksys boards might come with a Winbond W29N02GV which can be
> -configured in different ways. Make sure we configure it the same way
> -as the older chips so everything keeps working.
> -
> -Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
> -
> ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> -@@ -148,6 +148,8 @@
> - 		reg = <0>;
> - 		label = "pxa3xx_nand-0";
> - 		nand-rb = <0>;
> -+		nand-ecc-strength = <4>;
> -+		nand-ecc-step-size = <512>;
> - 		marvell,nand-keep-config;
> - 		nand-on-flash-bbt;
> - 	};
> diff --git a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
> b/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
> deleted file mode 100644
> index 930c0f9494..0000000000
> --- a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
> +++ /dev/null
> @@ -1,15 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-xp.dtsi
> -+++ b/arch/arm/boot/dts/armada-xp.dtsi
> -@@ -237,12 +237,10 @@
> - };
> -
> - &i2c0 {
> --	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
> - 	reg = <0x11000 0x100>;
> - };
> -
> - &i2c1 {
> --	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
> - 	reg = <0x11100 0x100>;
> - };
> -
> diff --git a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-
> partitions.patch b/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-
> partitions.patch
> deleted file mode 100644
> index 31bd53b1f3..0000000000
> --- a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-
> partitions.patch
> +++ /dev/null
> @@ -1,19 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-388-rd.dts
> -+++ b/arch/arm/boot/dts/armada-388-rd.dts
> -@@ -103,6 +103,16 @@
> - 		compatible = "st,m25p128", "jedec,spi-nor";
> - 		reg = <0>; /* Chip select 0 */
> - 		spi-max-frequency = <108000000>;
> -+
> -+		partition@0 {
> -+			label = "uboot";
> -+			reg = <0 0x400000>;
> -+		};
> -+
> -+		partition@1 {
> -+			label = "firmware";
> -+			reg = <0x400000 0xc00000>;
> -+		};
> - 	};
> - };
> -
> diff --git a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-
> partitions.patch b/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-
> ap-Add-partitions.patch
> deleted file mode 100644
> index 2057e31c7e..0000000000
> --- a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-
> partitions.patch
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00
> 2001
> -From: Maxime Ripard <maxime.ripard@free-electrons.com>
> -Date: Tue, 13 Jan 2015 11:14:09 +0100
> -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
> -
> -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ----
> - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
> - 1 file changed, 15 insertions(+)
> -
> ---- a/arch/arm/boot/dts/armada-385-db-ap.dts
> -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
> -@@ -218,19 +218,19 @@
> - 			#size-cells = <1>;
> -
> - 			partition@0 {
> --				label = "U-Boot";
> -+				label = "u-boot";
> - 				reg = <0x00000000 0x00800000>;
> - 				read-only;
> - 			};
> -
> - 			partition@800000 {
> --				label = "uImage";
> -+				label = "kernel";
> - 				reg = <0x00800000 0x00400000>;
> - 				read-only;
> - 			};
> -
> - 			partition@c00000 {
> --				label = "Root";
> -+				label = "ubi";
> - 				reg = <0x00c00000 0x3f400000>;
> - 			};
> - 		};
> diff --git a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-
> broken-idle.patch b/target/linux/mvebu/patches-5.4/307-armada-xp-
> linksys-mamba-broken-idle.patch
> deleted file mode 100644
> index 16112d53fc..0000000000
> --- a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-
> broken-idle.patch
> +++ /dev/null
> @@ -1,10 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -485,3 +485,7 @@
> - 		};
> - 	};
> - };
> -+
> -+&coherencyfab {
> -+	broken-idle;
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-
> wan.patch b/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-
> mamba-wan.patch
> deleted file mode 100644
> index 4315abc7d2..0000000000
> --- a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-
> wan.patch
> +++ /dev/null
> @@ -1,11 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -387,7 +387,7 @@
> -
> - 			port@4 {
> - 				reg = <4>;
> --				label = "internet";
> -+				label = "wan";
> - 			};
> -
> - 			port@5 {
> diff --git a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
> b/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
> deleted file mode 100644
> index e5e83572c9..0000000000
> --- a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
> +++ /dev/null
> @@ -1,50 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> -@@ -14,6 +14,13 @@
> - 	compatible = "linksys,armada385", "marvell,armada385",
> - 		     "marvell,armada380";
> -
> -+	aliases {
> -+		led-boot = &led_power;
> -+		led-failsafe = &led_power;
> -+		led-running = &led_power;
> -+		led-upgrade = &led_power;
> -+	};
> -+
> - 	chosen {
> - 		stdout-path = "serial0:115200n8";
> - 	};
> -@@ -71,7 +78,7 @@
> - 		pinctrl-0 = <&gpio_leds_pins>;
> - 		pinctrl-names = "default";
> -
> --		power {
> -+		led_power: power {
> - 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> - 			default-state = "on";
> - 		};
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -26,6 +26,13 @@
> - 	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
> - 		     "marvell,armadaxp", "marvell,armada-370-xp";
> -
> -+	aliases {
> -+		led-boot = &led_power;
> -+		led-failsafe = &led_power;
> -+		led-running = &led_power;
> -+		led-upgrade = &led_power;
> -+	};
> -+
> - 	chosen {
> - 		bootargs = "console=ttyS0,115200";
> - 		stdout-path = &uart0;
> -@@ -197,7 +204,7 @@
> - 		pinctrl-0 = <&power_led_pin>;
> - 		pinctrl-names = "default";
> -
> --		power {
> -+		led_power: power {
> - 			label = "mamba:white:power";
> - 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> - 			default-state = "on";
> diff --git a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-
> port.patch b/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-
> port.patch
> deleted file mode 100644
> index 84d49a004b..0000000000
> --- a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-
> port.patch
> +++ /dev/null
> @@ -1,25 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> -@@ -116,7 +116,7 @@
> - };
> -
> - &eth2 {
> --	status = "okay";
> -+	status = "disabled";
> - 	phy-mode = "sgmii";
> - 	buffer-manager = <&bm>;
> - 	bm,pool-long = <2>;
> -@@ -200,10 +200,10 @@
> - 				label = "wan";
> - 			};
> -
> --			port@5 {
> --				reg = <5>;
> -+			port@6 {
> -+				reg = <6>;
> - 				label = "cpu";
> --				ethernet = <&eth2>;
> -+				ethernet = <&eth0>;
> -
> - 				fixed-link {
> - 					speed = <1000>;
> diff --git a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-
> linksys.patch b/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-
> linksys.patch
> deleted file mode 100644
> index a5d3e63810..0000000000
> --- a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-
> linksys.patch
> +++ /dev/null
> @@ -1,68 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> -@@ -12,8 +12,8 @@
> -
> - / {
> - 	model = "Linksys WRT3200ACM";
> --	compatible = "linksys,rango", "linksys,armada385",
> "marvell,armada385",
> --		     "marvell,armada380";
> -+	compatible = "linksys,wrt3200acm", "linksys,rango",
> "linksys,armada385",
> -+		     "marvell,armada385", "marvell,armada380";
> - };
> -
> - &expander0 {
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -22,9 +22,10 @@
> - #include "armada-xp-mv78230.dtsi"
> -
> - / {
> --	model = "Linksys WRT1900AC";
> --	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
> --		     "marvell,armadaxp", "marvell,armada-370-xp";
> -+	model = "Linksys WRT1900AC v1";
> -+	compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
> -+		     "marvell,armadaxp-mv78230", "marvell,armadaxp",
> -+		     "marvell,armada-370-xp";
> -
> - 	aliases {
> - 		led-boot = &led_power;
> ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> -@@ -9,8 +9,9 @@
> - #include "armada-385-linksys.dtsi"
> -
> - / {
> --	model = "Linksys WRT1900ACv2";
> --	compatible = "linksys,cobra", "linksys,armada385",
> "marvell,armada385",
> -+	model = "Linksys WRT1900AC v2";
> -+	compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
> -+		     "linksys,armada385", "marvell,armada385",
> - 		     "marvell,armada380";
> - };
> -
> ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> -@@ -10,8 +10,8 @@
> -
> - / {
> - 	model = "Linksys WRT1200AC";
> --	compatible = "linksys,caiman", "linksys,armada385",
> "marvell,armada385",
> --		     "marvell,armada380";
> -+	compatible = "linksys,wrt1200ac", "linksys,caiman",
> "linksys,armada385",
> -+		     "marvell,armada385", "marvell,armada380";
> - };
> -
> - &expander0 {
> ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> -@@ -10,7 +10,8 @@
> -
> - / {
> - 	model = "Linksys WRT1900ACS";
> --	compatible = "linksys,shelby", "linksys,armada385",
> "marvell,armada385",
> -+	compatible = "linksys,wrt1900acs", "linksys,shelby",
> -+		     "linksys,armada385", "marvell,armada385",
> - 		     "marvell,armada380";
> - };
> -
> diff --git a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-
> clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-
> 5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
> deleted file mode 100644
> index dd2bef7f63..0000000000
> --- a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-
> emmc-on-clearfog-base.patch
> +++ /dev/null
> @@ -1,87 +0,0 @@
> -From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@armlinux.org.uk>
> -Date: Tue, 29 Nov 2016 10:15:45 +0000
> -Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
> -
> -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ----
> - arch/arm/boot/dts/armada-388-clearfog-base.dts     |  1 +
> - .../dts/armada-38x-solidrun-microsom-emmc.dtsi     | 62
> ++++++++++++++++++++++
> - 2 files changed, 63 insertions(+)
> - create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-
> emmc.dtsi
> -
> ---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
> -+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
> -@@ -7,6 +7,7 @@
> -
> - /dts-v1/;
> - #include "armada-388-clearfog.dtsi"
> -+#include "armada-38x-solidrun-microsom-emmc.dtsi"
> -
> - / {
> - 	model = "SolidRun Clearfog Base A1";
> ---- /dev/null
> -+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
> -@@ -0,0 +1,62 @@
> -+/*
> -+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
> -+ *
> -+ *  Copyright (C) 2015 Russell King
> -+ *
> -+ * This board is in development; the contents of this file work with
> -+ * the A1 rev 2.0 of the board, which does not represent final
> -+ * production board.  Things will change, don't expect this file to
> -+ * remain compatible info the future.
> -+ *
> -+ * This file is dual-licensed: you can use it either under the terms
> -+ * of the GPL or the X11 license, at your option. Note that this dual
> -+ * licensing only applies to this file, and not this project as a
> -+ * whole.
> -+ *
> -+ *  a) This file is free software; you can redistribute it and/or
> -+ *     modify it under the terms of the GNU General Public License
> -+ *     version 2 as published by the Free Software Foundation.
> -+ *
> -+ *     This file is distributed in the hope that it will be useful
> -+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -+ *     GNU General Public License for more details.
> -+ *
> -+ * Or, alternatively
> -+ *
> -+ *  b) Permission is hereby granted, free of charge, to any person
> -+ *     obtaining a copy of this software and associated documentation
> -+ *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> -+ *     copy, modify, merge, publish, distribute, sublicense, and/or
> -+ *     sell copies of the Software, and to permit persons to whom the
> -+ *     Software is furnished to do so, subject to the following
> -+ *     conditions:
> -+ *
> -+ *     The above copyright notice and this permission notice shall be
> -+ *     included in all copies or substantial portions of the Software.
> -+ *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> -+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
> WARRANTIES
> -+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> -+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
> COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> -+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> ARISING
> -+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
> OR
> -+ *     OTHER DEALINGS IN THE SOFTWARE.
> -+ */
> -+/ {
> -+	soc {
> -+		internal-regs {
> -+			sdhci@d8000 {
> -+				bus-width = <4>;
> -+				no-1-8-v;
> -+				non-removable;
> -+				pinctrl-0 = <&microsom_sdhci_pins>;
> -+				pinctrl-names = "default";
> -+				status = "okay";
> -+				wp-inverted;
> -+			};
> -+		};
> -+	};
> -+};
> diff --git a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-
> alias.patch b/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-
> alias.patch
> deleted file mode 100644
> index b837989d48..0000000000
> --- a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
> +++ /dev/null
> @@ -1,25 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-388-helios4.dts
> -+++ b/arch/arm/boot/dts/armada-388-helios4.dts
> -@@ -24,6 +24,10 @@
> - 	aliases {
> - 		/* So that mvebu u-boot can update the MAC addresses */
> - 		ethernet1 = &eth0;
> -+		led-boot = &led_status;
> -+		led-failsafe = &led_status;
> -+		led-running = &led_status;
> -+		led-upgrade = &led_status;
> - 	};
> -
> - 	chosen {
> -@@ -73,10 +77,9 @@
> - 		pinctrl-names = "default";
> - 		pinctrl-0 = <&helios_system_led_pins>;
> -
> --		status-led {
> -+		led_status: status-led {
> - 			label = "helios4:green:status";
> - 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
> --			linux,default-trigger = "heartbeat";
> - 			default-state = "on";
> - 		};
> -
> diff --git a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-
> armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-5.4/314-
> arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
> deleted file mode 100644
> index e989f59d5c..0000000000
> --- a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-
> Add-eth0-alias.patch
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00
> 2001
> -From: Kevin Mihelich <kevin@archlinuxarm.org>
> -Date: Tue, 4 Jul 2017 19:25:28 -0600
> -Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
> -
> -Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
> ----
> - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
> - 1 file changed, 1 insertion(+)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> -@@ -18,6 +18,7 @@
> - 	#size-cells = <2>;
> -
> - 	aliases {
> -+		ethernet0 = &eth0;
> - 		serial0 = &uart0;
> - 		serial1 = &uart1;
> - 	};
> diff --git a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-
> 3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.4/315-
> arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
> deleted file mode 100644
> index a741e378d9..0000000000
> --- a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-
> espressobin-add-ports-.patch
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00
> 2001
> -From: Tomasz Maciej Nowak <tmn505@gmail.com>
> -Date: Tue, 9 Apr 2019 15:53:42 +0200
> -Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
> - phandle
> -
> -Instead of referencing the whole mdio node, add ports phandle to adjust
> -port labels in dts for different hardware iterations of ESPRESSObin
> -boards.
> -
> -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
> ----
> - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> -@@ -147,7 +147,7 @@
> -
> - 		dsa,member = <0 0>;
> -
> --		ports {
> -+		ports: ports {
> - 			#address-cells = <1>;
> - 			#size-cells = <0>;
> -
> diff --git a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-
> PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-
> 5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
> deleted file mode 100644
> index 2240d0b39e..0000000000
> --- a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-
> operation-mode-to-2500base.patch
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Certain SFP modules (most notably Nokia GPON ones) first check
> -connectivity on 1000base-x, and switch to 2500base-x afterwards. This
> -is considered a quirk so the phylink switches the interface to
> -2500base-x as well.
> -
> -However, after power-cycling the uDPU device, network interface/SFP
> module
> -will not work correctly until the module is re-seated. This patch
> -resolves this issue by forcing the interface to be brought up in
> -2500base-x mode by default.
> -
> -Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
> -Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
> -Cc: Luka Perkov <luka.perkov@sartura.hr>
> -
> ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> -@@ -162,7 +162,7 @@
> - };
> -
> - &eth0 {
> --	phy-mode = "sgmii";
> -+	phy-mode = "2500base-x";
> - 	status = "okay";
> - 	managed = "in-band-status";
> - 	phys = <&comphy1 0>;
> -@@ -170,7 +170,7 @@
> - };
> -
> - &eth1 {
> --	phy-mode = "sgmii";
> -+	phy-mode = "2500base-x";
> - 	status = "okay";
> - 	managed = "in-band-status";
> - 	phys = <&comphy0 1>;
> diff --git a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-
> resize-kernel.patch b/target/linux/mvebu/patches-5.4/318-armada-xp-
> linksys-mamba-resize-kernel.patch
> deleted file mode 100644
> index f1fddceff4..0000000000
> --- a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-
> kernel.patch
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00
> 2001
> -From: Tad <tad@spotco.us>
> -Date: Fri, 5 Feb 2021 22:32:11 -0500
> -Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
> - partition to 4MB
> -
> -Signed-off-by: Tad Davanzo <tad@spotco.us>
> ----
> - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
> - 1 file changed, 4 insertions(+), 4 deletions(-)
> -
> ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> -@@ -456,9 +456,9 @@
> - 				reg = <0xa00000 0x2800000>;  /* 40MB */
> - 			};
> -
> --			partition@d00000 {
> -+			partition@e00000 {
> - 				label = "rootfs1";
> --				reg = <0xd00000 0x2500000>;  /* 37MB */
> -+				reg = <0xe00000 0x2400000>;  /* 36MB */
> - 			};
> -
> - 			/* kernel2 overlaps with rootfs2 by design */
> -@@ -467,9 +467,9 @@
> - 				reg = <0x3200000 0x2800000>; /* 40MB */
> - 			};
> -
> --			partition@3500000 {
> -+			partition@3600000 {
> - 				label = "rootfs2";
> --				reg = <0x3500000 0x2500000>; /* 37MB */
> -+				reg = <0x3600000 0x2400000>; /* 36MB */
> - 			};
> -
> - 			/*
> diff --git a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-
> engine.patch b/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-
> crypto-engine.patch
> deleted file mode 100644
> index 19378870ef..0000000000
> --- a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-
> engine.patch
> +++ /dev/null
> @@ -1,29 +0,0 @@
> ---- a/arch/arm/boot/dts/armada-370.dtsi
> -+++ b/arch/arm/boot/dts/armada-370.dtsi
> -@@ -234,7 +234,7 @@
> - 				clocks = <&gateclk 23>;
> - 				clock-names = "cesa0";
> - 				marvell,crypto-srams = <&crypto_sram>;
> --				marvell,crypto-sram-size = <0x7e0>;
> -+				marvell,crypto-sram-size = <0x800>;
> - 			};
> - 		};
> -
> -@@ -255,12 +255,17 @@
> - 			 * cpuidle workaround.
> - 			 */
> - 			idle-sram@0 {
> -+				status = "disabled";
> - 				reg = <0x0 0x20>;
> - 			};
> - 		};
> - 	};
> - };
> -
> -+&coherencyfab {
> -+	broken-idle;
> -+};
> -+
> - /*
> -  * Default UART pinctrl setting without RTS/CTS, can be overwritten on
> -  * board level if a different configuration is used.
> diff --git a/target/linux/mvebu/patches-5.4/400-find_active_root.patch
> b/target/linux/mvebu/patches-5.4/400-find_active_root.patch
> deleted file mode 100644
> index 65c43740fc..0000000000
> --- a/target/linux/mvebu/patches-5.4/400-find_active_root.patch
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -The WRT1900AC among other Linksys routers uses a dual-firmware layout.
> -Dynamically rename the active partition to "ubi".
> -
> -Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
> -
> ---- a/drivers/mtd/parsers/ofpart_core.c
> -+++ b/drivers/mtd/parsers/ofpart_core.c
> -@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
> - 	return of_get_property(pp, "compatible", NULL);
> - }
> -
> -+static int mangled_rootblock;
> -+
> - static int parse_fixed_partitions(struct mtd_info *master,
> - 				  const struct mtd_partition **pparts,
> - 				  struct mtd_part_parser_data *data)
> -@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
> - 	struct device_node *mtd_node;
> - 	struct device_node *ofpart_node;
> - 	const char *partname;
> -+	const char *owrtpart = "ubi";
> - 	struct device_node *pp;
> - 	int nr_parts, i, ret = 0;
> - 	bool dedicated = true;
> -@@ -133,9 +136,13 @@ static int parse_fixed_partitions(struct
> - 		parts[i].size = of_read_number(reg + a_cells, s_cells);
> - 		parts[i].of_node = pp;
> -
> --		partname = of_get_property(pp, "label", &len);
> --		if (!partname)
> --			partname = of_get_property(pp, "name", &len);
> -+		if (mangled_rootblock && (i == mangled_rootblock)) {
> -+			partname = owrtpart;
> -+		} else {
> -+			partname = of_get_property(pp, "label", &len);
> -+			if (!partname)
> -+				partname = of_get_property(pp, "name",
> &len);
> -+		}
> - 		parts[i].name = partname;
> -
> - 		if (of_get_property(pp, "read-only", &len))
> -@@ -249,6 +256,18 @@ static int __init ofpart_parser_init(voi
> - 	return 0;
> - }
> -
> -+static int __init active_root(char *str)
> -+{
> -+	get_option(&str, &mangled_rootblock);
> -+
> -+	if (!mangled_rootblock)
> -+		return 1;
> -+
> -+	return 1;
> -+}
> -+
> -+__setup("mangled_rootblock=", active_root);
> -+
> - static void __exit ofpart_parser_exit(void)
> - {
> - 	deregister_mtd_parser(&ofpart_parser);
> diff --git a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-
> workaround.patch b/target/linux/mvebu/patches-5.4/700-mvneta-tx-
> queue-workaround.patch
> deleted file mode 100644
> index 201864eef1..0000000000
> --- a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-
> workaround.patch
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -The hardware queue scheduling is apparently configured with fixed
> -priorities, which creates a nasty fairness issue where traffic from one
> -CPU can starve traffic from all other CPUs.
> -
> -Work around this issue by forcing all tx packets to go through one CPU,
> -until this issue is fixed properly.
> -
> -Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ----
> ---- a/drivers/net/ethernet/marvell/mvneta.c
> -+++ b/drivers/net/ethernet/marvell/mvneta.c
> -@@ -4691,6 +4691,16 @@ static int mvneta_ethtool_set_eee(struct
> - 	return phylink_ethtool_set_eee(pp->phylink, eee);
> - }
> -
> -+#ifndef CONFIG_ARM64
> -+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff
> *skb,
> -+			       struct net_device *sb_dev)
> -+{
> -+	/* XXX: hardware queue scheduling is broken,
> -+	 * use only one queue until it is fixed */
> -+	return 0;
> -+}
> -+#endif
> -+
> - static const struct net_device_ops mvneta_netdev_ops = {
> - 	.ndo_open            = mvneta_open,
> - 	.ndo_stop            = mvneta_stop,
> -@@ -4701,6 +4711,9 @@ static const struct net_device_ops mvnet
> - 	.ndo_fix_features    = mvneta_fix_features,
> - 	.ndo_get_stats64     = mvneta_get_stats64,
> - 	.ndo_do_ioctl        = mvneta_ioctl,
> -+#ifndef CONFIG_ARM64
> -+	.ndo_select_queue    = mvneta_select_queue,
> -+#endif
> - 	.ndo_bpf             = mvneta_xdp,
> - 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
> - };
> diff --git a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-
> failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-5.4/800-
> cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
> deleted file mode 100644
> index 29f36be460..0000000000
> --- a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-
> to-enter-deeper-sleep.patch
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@arm.linux.org.uk>
> -Date: Sat, 3 Oct 2015 09:13:05 +0100
> -Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
> -
> -The cpuidle ->enter method expects the return value to be the sleep
> -state we entered.  Returning negative numbers or other codes is not
> -permissible since coupled CPU idle was merged.
> -
> -At least some of the mvebu_v7_cpu_suspend() implementations return the
> -value from cpu_suspend(), which returns zero if the CPU vectors back
> -into the kernel via cpu_resume() (the success case), or the non-zero
> -return value of the suspend actor, or one (failure cases).
> -
> -We do not want to be returning the failure case value back to CPU idle
> -as that indicates that we successfully entered one of the deeper idle
> -states.  Always return zero instead, indicating that we slept for the
> -shortest amount of time.
> -
> -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ----
> - drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
> - 1 file changed, 5 insertions(+), 1 deletion(-)
> -
> ---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
> -+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
> -@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
> - 	ret = mvebu_v7_cpu_suspend(deepidle);
> - 	cpu_pm_exit();
> -
> -+	/*
> -+	 * If we failed to enter the desired state, indicate that we
> -+	 * slept lightly.
> -+	 */
> - 	if (ret)
> --		return ret;
> -+		return 0;
> -
> - 	return index;
> - }
> diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-
> on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-
> out-reset-on-link-up.patch
> deleted file mode 100644
> index 49ea3de0d1..0000000000
> --- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-
> link-up.patch
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00
> 2001
> -From: Russell King <rmk+kernel@armlinux.org.uk>
> -Date: Sat, 9 Jul 2016 10:58:16 +0100
> -Subject: pci: mvebu: time out reset on link up
> -
> -If the port reports that the link is up while we are resetting, there's
> -little point in waiting for the full duration.
> -
> -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ----
> - drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
> - 1 file changed, 14 insertions(+), 6 deletions(-)
> -
> ---- a/drivers/pci/controller/pci-mvebu.c
> -+++ b/drivers/pci/controller/pci-mvebu.c
> -@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve
> -
> - 	if (port->reset_gpio) {
> - 		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
> -+		unsigned int i;
> -
> - 		of_property_read_u32(port->dn, "reset-delay-us",
> - 				     &reset_udelay);
> -@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve
> - 		udelay(100);
> -
> - 		gpiod_set_value_cansleep(port->reset_gpio, 0);
> --		msleep(reset_udelay / 1000);
> -+		for (i = 0; i < reset_udelay; i += 1000) {
> -+			if (mvebu_pcie_link_up(port))
> -+				break;
> -+			msleep(1);
> -+		}
> -+
> -+		printk("%s: reset completed in %dus\n", port->name, i);
> - 	}
> -
> - 	return 0;
> -@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf
> - 		if (!child)
> - 			continue;
> -
> --		ret = mvebu_pcie_powerup(port);
> --		if (ret < 0)
> --			continue;
> --
> - 		port->base = mvebu_pcie_map_registers(pdev, child, port);
> - 		if (IS_ERR(port->base)) {
> - 			dev_err(dev, "%s: cannot map registers\n", port-
> >name);
> - 			port->base = NULL;
> --			mvebu_pcie_powerdown(port);
> -+			continue;
> -+		}
> -+
> -+		ret = mvebu_pcie_powerup(port);
> -+		if (ret < 0) {
> -+			port->base = NULL;
> - 			continue;
> - 		}
> -
> --
> 2.33.0
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
diff mbox series

Patch

diff --git a/target/linux/mvebu/config-5.4 b/target/linux/mvebu/config-5.4
deleted file mode 100644
index 3ee595c728..0000000000
--- a/target/linux/mvebu/config-5.4
+++ /dev/null
@@ -1,421 +0,0 @@ 
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_ESSIV=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-# CONFIG_MVPP2 is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-# CONFIG_SENSORS_DRIVETEMP is not set
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mvebu/cortexa53/config-5.4 b/target/linux/mvebu/cortexa53/config-5.4
deleted file mode 100644
index b88de78ee4..0000000000
--- a/target/linux/mvebu/cortexa53/config-5.4
+++ /dev/null
@@ -1,92 +0,0 @@ 
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_LINKSTATION is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/mvebu/cortexa72/config-5.4 b/target/linux/mvebu/cortexa72/config-5.4
deleted file mode 100644
index 12b2ea399c..0000000000
--- a/target/linux/mvebu/cortexa72/config-5.4
+++ /dev/null
@@ -1,99 +0,0 @@ 
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PTR_AUTH is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_LINKSTATION is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
deleted file mode 100644
index e3bed4d445..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ /dev/null
@@ -1,28 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
-	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3710";
-};
-
-&sdhci0 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mmccard: mmccard@0 {
-		compatible = "mmc-card";
-		reg = <0>;
-	};
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
deleted file mode 100644
index e1e0071434..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ /dev/null
@@ -1,43 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
-	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
-		     "globalscale,espressobin", "marvell,armada3720",
-		     "marvell,armada3710";
-};
-
-&ports {
-	port@1 {
-		reg = <1>;
-		label = "lan1";
-		phy-handle = <&switch0phy0>;
-	};
-
-	port@3 {
-		reg = <3>;
-		label = "wan";
-		phy-handle = <&switch0phy2>;
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mmccard: mmccard@0 {
-		compatible = "mmc-card";
-		reg = <0>;
-	};
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
deleted file mode 100644
index 40f18409bf..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ /dev/null
@@ -1,31 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-	model = "Globalscale Marvell ESPRESSOBin Board V7";
-	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3710";
-};
-
-&ports {
-	port@1 {
-		reg = <1>;
-		label = "lan1";
-		phy-handle = <&switch0phy0>;
-	};
-
-	port@3 {
-		reg = <3>;
-		label = "wan";
-		phy-handle = <&switch0phy2>;
-	};
-};
diff --git a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch b/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
deleted file mode 100644
index 0f4d14188d..0000000000
--- a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
+++ /dev/null
@@ -1,55 +0,0 @@ 
-From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:35 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for Marvell CN9130 SoC
- support
-
-A CN9130 SoC has one AP807 and one internal CP115.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 +++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
-@@ -0,0 +1,37 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell International Ltd.
-+ *
-+ * Device tree for the CN9130 SoC.
-+ */
-+
-+#include "armada-ap807-quad.dtsi"
-+
-+/ {
-+	model = "Marvell Armada CN9130 SoC";
-+	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
-+		     "marvell,armada-ap807";
-+};
-+
-+/*
-+ * Instantiate the internal CP115
-+ */
-+
-+#define CP11X_NAME		cp0
-+#define CP11X_BASE		f2000000
-+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
-+						    0xe0000000 + ((iface - 1) * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
-+#define CP11X_PCIE0_BASE	f2600000
-+#define CP11X_PCIE1_BASE	f2620000
-+#define CP11X_PCIE2_BASE	f2640000
-+
-+#include "armada-cp115.dtsi"
-+
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
diff --git a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch b/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
deleted file mode 100644
index 31f5accab6..0000000000
--- a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
+++ /dev/null
@@ -1,50 +0,0 @@ 
-From f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 Mon Sep 17 00:00:00 2001
-From: Remi Pommarel <repk@triplefau.lt>
-Date: Wed, 22 May 2019 23:33:50 +0200
-Subject: [PATCH] PCI: aardvark: Wait for endpoint to be ready before training
- link
-
-When configuring pcie reset pin from gpio (e.g. initially set by
-u-boot) to pcie function this pin goes low for a brief moment
-asserting the PERST# signal. Thus connected device enters fundamental
-reset process and link configuration can only begin after a minimal
-100ms delay (see [1]).
-
-Because the pin configuration comes from the "default" pinctrl it is
-implicitly configured before the probe callback is called:
-
-driver_probe_device()
-  really_probe()
-    ...
-    pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
-                           function and PERST# is asserted */
-    ...
-    drv->probe()
-
-[1] "PCI Express Base Specification", REV. 4.0
-    PCI Express, February 19 2014, 6.6.1 Conventional Reset
-
-Signed-off-by: Remi Pommarel <repk@triplefau.lt>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -349,6 +349,14 @@ static void advk_pcie_setup_hw(struct ad
- 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
- 	advk_writel(pcie, reg, PIO_CTRL);
- 
-+	/*
-+	 * PERST# signal could have been asserted by pinctrl subsystem before
-+	 * probe() callback has been called, making the endpoint going into
-+	 * fundamental reset. As required by PCI Express spec a delay for at
-+	 * least 100ms after such a reset before link training is needed.
-+	 */
-+	msleep(PCI_PM_D3COLD_WAIT);
-+
- 	/* Start link training */
- 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- 	reg |= PCIE_CORE_LINK_TRAINING;
diff --git a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch b/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
deleted file mode 100644
index 1ef87ed227..0000000000
--- a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
+++ /dev/null
@@ -1,30 +0,0 @@ 
-From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:32 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for CP115
-
-Create a DTSI file based on the CP11x one. Differences will be
-described in the near future.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
-@@ -0,0 +1,12 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada CP115.
-+ */
-+
-+#define CP11X_TYPE cp115
-+
-+#include "armada-cp11x.dtsi"
-+
-+#undef CP11X_TYPE
diff --git a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch b/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
deleted file mode 100644
index 5e41f548d6..0000000000
--- a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
+++ /dev/null
@@ -1,1318 +0,0 @@ 
-From 47cf40af64c35a69ef6a193c47768ad1bda29db2 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:29 +0200
-Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of CP115
-
-CP110 and CP115 are almost the same in terms of features and have a
-very limited set of differences. Let's create an armada-cp11x.dtsi
-file which will be used to instantiate both CP110 and CP115
-nodes.
-
-The only changes between the two armada-cp11{0,x}.dtsi files are the
-following naming in macros: s/CP110/CP11X/.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |  28 +-
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi  |  56 +-
- .../arm64/boot/dts/marvell/armada-common.dtsi |   4 +-
- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +----------------
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579 ++++++++++++++++++
- 5 files changed, 627 insertions(+), 615 deletions(-)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -17,23 +17,23 @@
- /*
-  * Instantiate the CP110
-  */
--#define CP110_NAME		cp0
--#define CP110_BASE		f2000000
--#define CP110_PCIE_IO_BASE	0xf9000000
--#define CP110_PCIE_MEM_BASE	0xf6000000
--#define CP110_PCIE0_BASE	f2600000
--#define CP110_PCIE1_BASE	f2620000
--#define CP110_PCIE2_BASE	f2640000
-+#define CP11X_NAME		cp0
-+#define CP11X_BASE		f2000000
-+#define CP11X_PCIE_IO_BASE	0xf9000000
-+#define CP11X_PCIE_MEM_BASE	0xf6000000
-+#define CP11X_PCIE0_BASE	f2600000
-+#define CP11X_PCIE1_BASE	f2620000
-+#define CP11X_PCIE2_BASE	f2640000
- 
- #include "armada-cp110.dtsi"
- 
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
- 
- &cp0_gpio1 {
- 	status = "okay";
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -19,44 +19,44 @@
- /*
-  * Instantiate the master CP110
-  */
--#define CP110_NAME		cp0
--#define CP110_BASE		f2000000
--#define CP110_PCIE_IO_BASE	0xf9000000
--#define CP110_PCIE_MEM_BASE	0xf6000000
--#define CP110_PCIE0_BASE	f2600000
--#define CP110_PCIE1_BASE	f2620000
--#define CP110_PCIE2_BASE	f2640000
-+#define CP11X_NAME		cp0
-+#define CP11X_BASE		f2000000
-+#define CP11X_PCIE_IO_BASE	0xf9000000
-+#define CP11X_PCIE_MEM_BASE	0xf6000000
-+#define CP11X_PCIE0_BASE	f2600000
-+#define CP11X_PCIE1_BASE	f2620000
-+#define CP11X_PCIE2_BASE	f2640000
- 
- #include "armada-cp110.dtsi"
- 
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
- 
- /*
-  * Instantiate the slave CP110
-  */
--#define CP110_NAME		cp1
--#define CP110_BASE		f4000000
--#define CP110_PCIE_IO_BASE	0xfd000000
--#define CP110_PCIE_MEM_BASE	0xfa000000
--#define CP110_PCIE0_BASE	f4600000
--#define CP110_PCIE1_BASE	f4620000
--#define CP110_PCIE2_BASE	f4640000
-+#define CP11X_NAME		cp1
-+#define CP11X_BASE		f4000000
-+#define CP11X_PCIE_IO_BASE	0xfd000000
-+#define CP11X_PCIE_MEM_BASE	0xfa000000
-+#define CP11X_PCIE0_BASE	f4600000
-+#define CP11X_PCIE1_BASE	f4620000
-+#define CP11X_PCIE2_BASE	f4640000
- 
- #include "armada-cp110.dtsi"
- 
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
- 
- /* The 80x0 has two CP blocks, but uses only one block from each. */
- &cp1_gpio1 {
---- a/arch/arm64/boot/dts/marvell/armada-common.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
-@@ -6,6 +6,6 @@
- /* Common definitions used by Armada 7K/8K DTs */
- #define PASTER(x, y) x ## y
- #define EVALUATOR(x, y) PASTER(x, y)
--#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
--#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
-+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
-+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
- #define ADDRESSIFY(addr) EVALUATOR(0x, addr)
---- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
-@@ -1,579 +1,12 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- /*
-- * Copyright (C) 2016 Marvell Technology Group Ltd.
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-  *
-  * Device Tree file for Marvell Armada CP110.
-  */
- 
--#include <dt-bindings/interrupt-controller/mvebu-icu.h>
--#include <dt-bindings/thermal/thermal.h>
-+#define CP11X_TYPE cp110
- 
--#include "armada-common.dtsi"
-+#include "armada-cp11x.dtsi"
- 
--#define CP110_PCIEx_IO_BASE(iface)	(CP110_PCIE_IO_BASE + (iface *  0x10000))
--#define CP110_PCIEx_MEM_BASE(iface)	(CP110_PCIE_MEM_BASE + (iface *  0x1000000))
--#define CP110_PCIEx_CONF_BASE(iface)	(CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
--
--/ {
--	/*
--	 * The contents of the node are defined below, in order to
--	 * save one indentation level
--	 */
--	CP110_NAME: CP110_NAME { };
--
--	/*
--	 * CPs only have one sensor in the thermal IC.
--	 *
--	 * The cooling maps are empty as there are no cooling devices.
--	 */
--	thermal-zones {
--		CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
--			polling-delay-passive = <0>; /* Interrupt driven */
--			polling-delay = <0>; /* Interrupt driven */
--
--			thermal-sensors = <&CP110_LABEL(thermal) 0>;
--
--			trips {
--				CP110_LABEL(crit): crit {
--					temperature = <100000>; /* mC degrees */
--					hysteresis = <2000>; /* mC degrees */
--					type = "critical";
--				};
--			};
--
--			cooling-maps { };
--		};
--	};
--};
--
--&CP110_NAME {
--	#address-cells = <2>;
--	#size-cells = <2>;
--	compatible = "simple-bus";
--	interrupt-parent = <&CP110_LABEL(icu_nsr)>;
--	ranges;
--
--	config-space@CP110_BASE {
--		#address-cells = <1>;
--		#size-cells = <1>;
--		compatible = "simple-bus";
--		ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
--
--		CP110_LABEL(ethernet): ethernet@0 {
--			compatible = "marvell,armada-7k-pp22";
--			reg = <0x0 0x100000>, <0x129000 0xb000>;
--			clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
--				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
--				 <&CP110_LABEL(clk) 1 18>;
--			clock-names = "pp_clk", "gop_clk",
--				      "mg_clk", "mg_core_clk", "axi_clk";
--			marvell,system-controller = <&CP110_LABEL(syscon0)>;
--			status = "disabled";
--			dma-coherent;
--
--			CP110_LABEL(eth0): eth0 {
--				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
--					<43 IRQ_TYPE_LEVEL_HIGH>,
--					<47 IRQ_TYPE_LEVEL_HIGH>,
--					<51 IRQ_TYPE_LEVEL_HIGH>,
--					<55 IRQ_TYPE_LEVEL_HIGH>,
--					<59 IRQ_TYPE_LEVEL_HIGH>,
--					<63 IRQ_TYPE_LEVEL_HIGH>,
--					<67 IRQ_TYPE_LEVEL_HIGH>,
--					<71 IRQ_TYPE_LEVEL_HIGH>,
--					<129 IRQ_TYPE_LEVEL_HIGH>;
--				interrupt-names = "hif0", "hif1", "hif2",
--					"hif3", "hif4", "hif5", "hif6", "hif7",
--					"hif8", "link";
--				port-id = <0>;
--				gop-port-id = <0>;
--				status = "disabled";
--			};
--
--			CP110_LABEL(eth1): eth1 {
--				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
--					<44 IRQ_TYPE_LEVEL_HIGH>,
--					<48 IRQ_TYPE_LEVEL_HIGH>,
--					<52 IRQ_TYPE_LEVEL_HIGH>,
--					<56 IRQ_TYPE_LEVEL_HIGH>,
--					<60 IRQ_TYPE_LEVEL_HIGH>,
--					<64 IRQ_TYPE_LEVEL_HIGH>,
--					<68 IRQ_TYPE_LEVEL_HIGH>,
--					<72 IRQ_TYPE_LEVEL_HIGH>,
--					<128 IRQ_TYPE_LEVEL_HIGH>;
--				interrupt-names = "hif0", "hif1", "hif2",
--					"hif3", "hif4", "hif5", "hif6", "hif7",
--					"hif8", "link";
--				port-id = <1>;
--				gop-port-id = <2>;
--				status = "disabled";
--			};
--
--			CP110_LABEL(eth2): eth2 {
--				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
--					<45 IRQ_TYPE_LEVEL_HIGH>,
--					<49 IRQ_TYPE_LEVEL_HIGH>,
--					<53 IRQ_TYPE_LEVEL_HIGH>,
--					<57 IRQ_TYPE_LEVEL_HIGH>,
--					<61 IRQ_TYPE_LEVEL_HIGH>,
--					<65 IRQ_TYPE_LEVEL_HIGH>,
--					<69 IRQ_TYPE_LEVEL_HIGH>,
--					<73 IRQ_TYPE_LEVEL_HIGH>,
--					<127 IRQ_TYPE_LEVEL_HIGH>;
--				interrupt-names = "hif0", "hif1", "hif2",
--					"hif3", "hif4", "hif5", "hif6", "hif7",
--					"hif8", "link";
--				port-id = <2>;
--				gop-port-id = <3>;
--				status = "disabled";
--			};
--		};
--
--		CP110_LABEL(comphy): phy@120000 {
--			compatible = "marvell,comphy-cp110";
--			reg = <0x120000 0x6000>;
--			marvell,system-controller = <&CP110_LABEL(syscon0)>;
--			clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
--				 <&CP110_LABEL(clk) 1 18>;
--			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			CP110_LABEL(comphy0): phy@0 {
--				reg = <0>;
--				#phy-cells = <1>;
--			};
--
--			CP110_LABEL(comphy1): phy@1 {
--				reg = <1>;
--				#phy-cells = <1>;
--			};
--
--			CP110_LABEL(comphy2): phy@2 {
--				reg = <2>;
--				#phy-cells = <1>;
--			};
--
--			CP110_LABEL(comphy3): phy@3 {
--				reg = <3>;
--				#phy-cells = <1>;
--			};
--
--			CP110_LABEL(comphy4): phy@4 {
--				reg = <4>;
--				#phy-cells = <1>;
--			};
--
--			CP110_LABEL(comphy5): phy@5 {
--				reg = <5>;
--				#phy-cells = <1>;
--			};
--		};
--
--		CP110_LABEL(mdio): mdio@12a200 {
--			#address-cells = <1>;
--			#size-cells = <0>;
--			compatible = "marvell,orion-mdio";
--			reg = <0x12a200 0x10>;
--			clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
--				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(xmdio): mdio@12a600 {
--			#address-cells = <1>;
--			#size-cells = <0>;
--			compatible = "marvell,xmdio";
--			reg = <0x12a600 0x10>;
--			clocks = <&CP110_LABEL(clk) 1 5>,
--				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(icu): interrupt-controller@1e0000 {
--			compatible = "marvell,cp110-icu";
--			reg = <0x1e0000 0x440>;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			CP110_LABEL(icu_nsr): interrupt-controller@10 {
--				compatible = "marvell,cp110-icu-nsr";
--				reg = <0x10 0x20>;
--				#interrupt-cells = <2>;
--				interrupt-controller;
--				msi-parent = <&gicp>;
--			};
--
--			CP110_LABEL(icu_sei): interrupt-controller@50 {
--				compatible = "marvell,cp110-icu-sei";
--				reg = <0x50 0x10>;
--				#interrupt-cells = <2>;
--				interrupt-controller;
--				msi-parent = <&sei>;
--			};
--		};
--
--		CP110_LABEL(rtc): rtc@284000 {
--			compatible = "marvell,armada-8k-rtc";
--			reg = <0x284000 0x20>, <0x284080 0x24>;
--			reg-names = "rtc", "rtc-soc";
--			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
--		};
--
--		CP110_LABEL(syscon0): system-controller@440000 {
--			compatible = "syscon", "simple-mfd";
--			reg = <0x440000 0x2000>;
--
--			CP110_LABEL(clk): clock {
--				compatible = "marvell,cp110-clock";
--				#clock-cells = <2>;
--			};
--
--			CP110_LABEL(gpio1): gpio@100 {
--				compatible = "marvell,armada-8k-gpio";
--				offset = <0x100>;
--				ngpios = <32>;
--				gpio-controller;
--				#gpio-cells = <2>;
--				gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
--				interrupt-controller;
--				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
--					<85 IRQ_TYPE_LEVEL_HIGH>,
--					<84 IRQ_TYPE_LEVEL_HIGH>,
--					<83 IRQ_TYPE_LEVEL_HIGH>;
--				#interrupt-cells = <2>;
--				status = "disabled";
--			};
--
--			CP110_LABEL(gpio2): gpio@140 {
--				compatible = "marvell,armada-8k-gpio";
--				offset = <0x140>;
--				ngpios = <31>;
--				gpio-controller;
--				#gpio-cells = <2>;
--				gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
--				interrupt-controller;
--				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
--					<81 IRQ_TYPE_LEVEL_HIGH>,
--					<80 IRQ_TYPE_LEVEL_HIGH>,
--					<79 IRQ_TYPE_LEVEL_HIGH>;
--				#interrupt-cells = <2>;
--				status = "disabled";
--			};
--		};
--
--		CP110_LABEL(syscon1): system-controller@400000 {
--			compatible = "syscon", "simple-mfd";
--			reg = <0x400000 0x1000>;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			CP110_LABEL(thermal): thermal-sensor@70 {
--				compatible = "marvell,armada-cp110-thermal";
--				reg = <0x70 0x10>;
--				interrupts-extended =
--					<&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
--				#thermal-sensor-cells = <1>;
--			};
--		};
--
--		CP110_LABEL(usb3_0): usb3@500000 {
--			compatible = "marvell,armada-8k-xhci",
--			"generic-xhci";
--			reg = <0x500000 0x4000>;
--			dma-coherent;
--			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 22>,
--				 <&CP110_LABEL(clk) 1 16>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(usb3_1): usb3@510000 {
--			compatible = "marvell,armada-8k-xhci",
--			"generic-xhci";
--			reg = <0x510000 0x4000>;
--			dma-coherent;
--			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 23>,
--				 <&CP110_LABEL(clk) 1 16>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(sata0): sata@540000 {
--			compatible = "marvell,armada-8k-ahci",
--			"generic-ahci";
--			reg = <0x540000 0x30000>;
--			dma-coherent;
--			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
--			clocks = <&CP110_LABEL(clk) 1 15>,
--				 <&CP110_LABEL(clk) 1 16>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--			status = "disabled";
--
--			sata-port@0 {
--				reg = <0>;
--			};
--
--			sata-port@1 {
--				reg = <1>;
--			};
--		};
--
--		CP110_LABEL(xor0): xor@6a0000 {
--			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
--			dma-coherent;
--			msi-parent = <&gic_v2m0>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 8>,
--				 <&CP110_LABEL(clk) 1 14>;
--		};
--
--		CP110_LABEL(xor1): xor@6c0000 {
--			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
--			dma-coherent;
--			msi-parent = <&gic_v2m0>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 7>,
--				 <&CP110_LABEL(clk) 1 14>;
--		};
--
--		CP110_LABEL(spi0): spi@700600 {
--			compatible = "marvell,armada-380-spi";
--			reg = <0x700600 0x50>;
--			#address-cells = <0x1>;
--			#size-cells = <0x0>;
--			clock-names = "core", "axi";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(spi1): spi@700680 {
--			compatible = "marvell,armada-380-spi";
--			reg = <0x700680 0x50>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--			clock-names = "core", "axi";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(i2c0): i2c@701000 {
--			compatible = "marvell,mv78230-i2c";
--			reg = <0x701000 0x20>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(i2c1): i2c@701100 {
--			compatible = "marvell,mv78230-i2c";
--			reg = <0x701100 0x20>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(uart0): serial@702000 {
--			compatible = "snps,dw-apb-uart";
--			reg = <0x702000 0x100>;
--			reg-shift = <2>;
--			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
--			reg-io-width = <1>;
--			clock-names = "baudclk", "apb_pclk";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(uart1): serial@702100 {
--			compatible = "snps,dw-apb-uart";
--			reg = <0x702100 0x100>;
--			reg-shift = <2>;
--			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
--			reg-io-width = <1>;
--			clock-names = "baudclk", "apb_pclk";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(uart2): serial@702200 {
--			compatible = "snps,dw-apb-uart";
--			reg = <0x702200 0x100>;
--			reg-shift = <2>;
--			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
--			reg-io-width = <1>;
--			clock-names = "baudclk", "apb_pclk";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(uart3): serial@702300 {
--			compatible = "snps,dw-apb-uart";
--			reg = <0x702300 0x100>;
--			reg-shift = <2>;
--			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
--			reg-io-width = <1>;
--			clock-names = "baudclk", "apb_pclk";
--			clocks = <&CP110_LABEL(clk) 1 21>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(nand_controller): nand@720000 {
--			/*
--			 * Due to the limitation of the pins available
--			 * this controller is only usable on the CPM
--			 * for A7K and on the CPS for A8K.
--			 */
--			compatible = "marvell,armada-8k-nand-controller",
--				"marvell,armada370-nand-controller";
--			reg = <0x720000 0x54>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 2>,
--				 <&CP110_LABEL(clk) 1 17>;
--			marvell,system-controller = <&CP110_LABEL(syscon0)>;
--			status = "disabled";
--		};
--
--		CP110_LABEL(trng): trng@760000 {
--			compatible = "marvell,armada-8k-rng",
--			"inside-secure,safexcel-eip76";
--			reg = <0x760000 0x7d>;
--			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 25>,
--				 <&CP110_LABEL(clk) 1 17>;
--			status = "okay";
--		};
--
--		CP110_LABEL(sdhci0): sdhci@780000 {
--			compatible = "marvell,armada-cp110-sdhci";
--			reg = <0x780000 0x300>;
--			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
--			clock-names = "core", "axi";
--			clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
--			dma-coherent;
--			status = "disabled";
--		};
--
--		CP110_LABEL(crypto): crypto@800000 {
--			compatible = "inside-secure,safexcel-eip197b";
--			reg = <0x800000 0x200000>;
--			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
--				<88 IRQ_TYPE_LEVEL_HIGH>,
--				<89 IRQ_TYPE_LEVEL_HIGH>,
--				<90 IRQ_TYPE_LEVEL_HIGH>,
--				<91 IRQ_TYPE_LEVEL_HIGH>,
--				<92 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "mem", "ring0", "ring1",
--				"ring2", "ring3", "eip";
--			clock-names = "core", "reg";
--			clocks = <&CP110_LABEL(clk) 1 26>,
--				 <&CP110_LABEL(clk) 1 17>;
--			dma-coherent;
--		};
--	};
--
--	CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
--		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
--		reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
--		      <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
--		reg-names = "ctrl", "config";
--		#address-cells = <3>;
--		#size-cells = <2>;
--		#interrupt-cells = <1>;
--		device_type = "pci";
--		dma-coherent;
--		msi-parent = <&gic_v2m0>;
--
--		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0  CP110_PCIEx_IO_BASE(0) 0 0x10000
--		/* non-prefetchable memory */
--		0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0  CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
--		interrupt-map-mask = <0 0 0 0>;
--		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
--		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
--		num-lanes = <1>;
--		clock-names = "core", "reg";
--		clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
--		status = "disabled";
--	};
--
--	CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
--		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
--		reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
--		      <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
--		reg-names = "ctrl", "config";
--		#address-cells = <3>;
--		#size-cells = <2>;
--		#interrupt-cells = <1>;
--		device_type = "pci";
--		dma-coherent;
--		msi-parent = <&gic_v2m0>;
--
--		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0  CP110_PCIEx_IO_BASE(1) 0 0x10000
--		/* non-prefetchable memory */
--		0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0  CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
--		interrupt-map-mask = <0 0 0 0>;
--		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
--		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
--
--		num-lanes = <1>;
--		clock-names = "core", "reg";
--		clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
--		status = "disabled";
--	};
--
--	CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
--		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
--		reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
--		      <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
--		reg-names = "ctrl", "config";
--		#address-cells = <3>;
--		#size-cells = <2>;
--		#interrupt-cells = <1>;
--		device_type = "pci";
--		dma-coherent;
--		msi-parent = <&gic_v2m0>;
--
--		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0  CP110_PCIEx_IO_BASE(2) 0 0x10000
--		/* non-prefetchable memory */
--		0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0  CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
--		interrupt-map-mask = <0 0 0 0>;
--		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
--		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
--
--		num-lanes = <1>;
--		clock-names = "core", "reg";
--		clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
--		status = "disabled";
--	};
--};
-+#undef CP11X_TYPE
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -0,0 +1,579 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2016 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada CP11x.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+#include "armada-common.dtsi"
-+
-+#define CP11X_PCIEx_IO_BASE(iface)	(CP11X_PCIE_IO_BASE + (iface *  0x10000))
-+#define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE + (iface *  0x1000000))
-+#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
-+
-+/ {
-+	/*
-+	 * The contents of the node are defined below, in order to
-+	 * save one indentation level
-+	 */
-+	CP11X_NAME: CP11X_NAME { };
-+
-+	/*
-+	 * CPs only have one sensor in the thermal IC.
-+	 *
-+	 * The cooling maps are empty as there are no cooling devices.
-+	 */
-+	thermal-zones {
-+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
-+			polling-delay-passive = <0>; /* Interrupt driven */
-+			polling-delay = <0>; /* Interrupt driven */
-+
-+			thermal-sensors = <&CP11X_LABEL(thermal) 0>;
-+
-+			trips {
-+				CP11X_LABEL(crit): crit {
-+					temperature = <100000>; /* mC degrees */
-+					hysteresis = <2000>; /* mC degrees */
-+					type = "critical";
-+				};
-+			};
-+
-+			cooling-maps { };
-+		};
-+	};
-+};
-+
-+&CP11X_NAME {
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+	compatible = "simple-bus";
-+	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
-+	ranges;
-+
-+	config-space@CP11X_BASE {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "simple-bus";
-+		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
-+
-+		CP11X_LABEL(ethernet): ethernet@0 {
-+			compatible = "marvell,armada-7k-pp22";
-+			reg = <0x0 0x100000>, <0x129000 0xb000>;
-+			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
-+				 <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
-+				 <&CP11X_LABEL(clk) 1 18>;
-+			clock-names = "pp_clk", "gop_clk",
-+				      "mg_clk", "mg_core_clk", "axi_clk";
-+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+			status = "disabled";
-+			dma-coherent;
-+
-+			CP11X_LABEL(eth0): eth0 {
-+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
-+					<43 IRQ_TYPE_LEVEL_HIGH>,
-+					<47 IRQ_TYPE_LEVEL_HIGH>,
-+					<51 IRQ_TYPE_LEVEL_HIGH>,
-+					<55 IRQ_TYPE_LEVEL_HIGH>,
-+					<59 IRQ_TYPE_LEVEL_HIGH>,
-+					<63 IRQ_TYPE_LEVEL_HIGH>,
-+					<67 IRQ_TYPE_LEVEL_HIGH>,
-+					<71 IRQ_TYPE_LEVEL_HIGH>,
-+					<129 IRQ_TYPE_LEVEL_HIGH>;
-+				interrupt-names = "hif0", "hif1", "hif2",
-+					"hif3", "hif4", "hif5", "hif6", "hif7",
-+					"hif8", "link";
-+				port-id = <0>;
-+				gop-port-id = <0>;
-+				status = "disabled";
-+			};
-+
-+			CP11X_LABEL(eth1): eth1 {
-+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
-+					<44 IRQ_TYPE_LEVEL_HIGH>,
-+					<48 IRQ_TYPE_LEVEL_HIGH>,
-+					<52 IRQ_TYPE_LEVEL_HIGH>,
-+					<56 IRQ_TYPE_LEVEL_HIGH>,
-+					<60 IRQ_TYPE_LEVEL_HIGH>,
-+					<64 IRQ_TYPE_LEVEL_HIGH>,
-+					<68 IRQ_TYPE_LEVEL_HIGH>,
-+					<72 IRQ_TYPE_LEVEL_HIGH>,
-+					<128 IRQ_TYPE_LEVEL_HIGH>;
-+				interrupt-names = "hif0", "hif1", "hif2",
-+					"hif3", "hif4", "hif5", "hif6", "hif7",
-+					"hif8", "link";
-+				port-id = <1>;
-+				gop-port-id = <2>;
-+				status = "disabled";
-+			};
-+
-+			CP11X_LABEL(eth2): eth2 {
-+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
-+					<45 IRQ_TYPE_LEVEL_HIGH>,
-+					<49 IRQ_TYPE_LEVEL_HIGH>,
-+					<53 IRQ_TYPE_LEVEL_HIGH>,
-+					<57 IRQ_TYPE_LEVEL_HIGH>,
-+					<61 IRQ_TYPE_LEVEL_HIGH>,
-+					<65 IRQ_TYPE_LEVEL_HIGH>,
-+					<69 IRQ_TYPE_LEVEL_HIGH>,
-+					<73 IRQ_TYPE_LEVEL_HIGH>,
-+					<127 IRQ_TYPE_LEVEL_HIGH>;
-+				interrupt-names = "hif0", "hif1", "hif2",
-+					"hif3", "hif4", "hif5", "hif6", "hif7",
-+					"hif8", "link";
-+				port-id = <2>;
-+				gop-port-id = <3>;
-+				status = "disabled";
-+			};
-+		};
-+
-+		CP11X_LABEL(comphy): phy@120000 {
-+			compatible = "marvell,comphy-cp110";
-+			reg = <0x120000 0x6000>;
-+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+			clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
-+				 <&CP11X_LABEL(clk) 1 18>;
-+			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			CP11X_LABEL(comphy0): phy@0 {
-+				reg = <0>;
-+				#phy-cells = <1>;
-+			};
-+
-+			CP11X_LABEL(comphy1): phy@1 {
-+				reg = <1>;
-+				#phy-cells = <1>;
-+			};
-+
-+			CP11X_LABEL(comphy2): phy@2 {
-+				reg = <2>;
-+				#phy-cells = <1>;
-+			};
-+
-+			CP11X_LABEL(comphy3): phy@3 {
-+				reg = <3>;
-+				#phy-cells = <1>;
-+			};
-+
-+			CP11X_LABEL(comphy4): phy@4 {
-+				reg = <4>;
-+				#phy-cells = <1>;
-+			};
-+
-+			CP11X_LABEL(comphy5): phy@5 {
-+				reg = <5>;
-+				#phy-cells = <1>;
-+			};
-+		};
-+
-+		CP11X_LABEL(mdio): mdio@12a200 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "marvell,orion-mdio";
-+			reg = <0x12a200 0x10>;
-+			clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
-+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(xmdio): mdio@12a600 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "marvell,xmdio";
-+			reg = <0x12a600 0x10>;
-+			clocks = <&CP11X_LABEL(clk) 1 5>,
-+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(icu): interrupt-controller@1e0000 {
-+			compatible = "marvell,cp110-icu";
-+			reg = <0x1e0000 0x440>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
-+				compatible = "marvell,cp110-icu-nsr";
-+				reg = <0x10 0x20>;
-+				#interrupt-cells = <2>;
-+				interrupt-controller;
-+				msi-parent = <&gicp>;
-+			};
-+
-+			CP11X_LABEL(icu_sei): interrupt-controller@50 {
-+				compatible = "marvell,cp110-icu-sei";
-+				reg = <0x50 0x10>;
-+				#interrupt-cells = <2>;
-+				interrupt-controller;
-+				msi-parent = <&sei>;
-+			};
-+		};
-+
-+		CP11X_LABEL(rtc): rtc@284000 {
-+			compatible = "marvell,armada-8k-rtc";
-+			reg = <0x284000 0x20>, <0x284080 0x24>;
-+			reg-names = "rtc", "rtc-soc";
-+			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		CP11X_LABEL(syscon0): system-controller@440000 {
-+			compatible = "syscon", "simple-mfd";
-+			reg = <0x440000 0x2000>;
-+
-+			CP11X_LABEL(clk): clock {
-+				compatible = "marvell,cp110-clock";
-+				#clock-cells = <2>;
-+			};
-+
-+			CP11X_LABEL(gpio1): gpio@100 {
-+				compatible = "marvell,armada-8k-gpio";
-+				offset = <0x100>;
-+				ngpios = <32>;
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
-+				interrupt-controller;
-+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
-+					<85 IRQ_TYPE_LEVEL_HIGH>,
-+					<84 IRQ_TYPE_LEVEL_HIGH>,
-+					<83 IRQ_TYPE_LEVEL_HIGH>;
-+				#interrupt-cells = <2>;
-+				status = "disabled";
-+			};
-+
-+			CP11X_LABEL(gpio2): gpio@140 {
-+				compatible = "marvell,armada-8k-gpio";
-+				offset = <0x140>;
-+				ngpios = <31>;
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
-+				interrupt-controller;
-+				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
-+					<81 IRQ_TYPE_LEVEL_HIGH>,
-+					<80 IRQ_TYPE_LEVEL_HIGH>,
-+					<79 IRQ_TYPE_LEVEL_HIGH>;
-+				#interrupt-cells = <2>;
-+				status = "disabled";
-+			};
-+		};
-+
-+		CP11X_LABEL(syscon1): system-controller@400000 {
-+			compatible = "syscon", "simple-mfd";
-+			reg = <0x400000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			CP11X_LABEL(thermal): thermal-sensor@70 {
-+				compatible = "marvell,armada-cp110-thermal";
-+				reg = <0x70 0x10>;
-+				interrupts-extended =
-+					<&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
-+				#thermal-sensor-cells = <1>;
-+			};
-+		};
-+
-+		CP11X_LABEL(usb3_0): usb3@500000 {
-+			compatible = "marvell,armada-8k-xhci",
-+			"generic-xhci";
-+			reg = <0x500000 0x4000>;
-+			dma-coherent;
-+			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 22>,
-+				 <&CP11X_LABEL(clk) 1 16>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(usb3_1): usb3@510000 {
-+			compatible = "marvell,armada-8k-xhci",
-+			"generic-xhci";
-+			reg = <0x510000 0x4000>;
-+			dma-coherent;
-+			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 23>,
-+				 <&CP11X_LABEL(clk) 1 16>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(sata0): sata@540000 {
-+			compatible = "marvell,armada-8k-ahci",
-+			"generic-ahci";
-+			reg = <0x540000 0x30000>;
-+			dma-coherent;
-+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&CP11X_LABEL(clk) 1 15>,
-+				 <&CP11X_LABEL(clk) 1 16>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sata-port@0 {
-+				reg = <0>;
-+			};
-+
-+			sata-port@1 {
-+				reg = <1>;
-+			};
-+		};
-+
-+		CP11X_LABEL(xor0): xor@6a0000 {
-+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
-+			dma-coherent;
-+			msi-parent = <&gic_v2m0>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 8>,
-+				 <&CP11X_LABEL(clk) 1 14>;
-+		};
-+
-+		CP11X_LABEL(xor1): xor@6c0000 {
-+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
-+			dma-coherent;
-+			msi-parent = <&gic_v2m0>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 7>,
-+				 <&CP11X_LABEL(clk) 1 14>;
-+		};
-+
-+		CP11X_LABEL(spi0): spi@700600 {
-+			compatible = "marvell,armada-380-spi";
-+			reg = <0x700600 0x50>;
-+			#address-cells = <0x1>;
-+			#size-cells = <0x0>;
-+			clock-names = "core", "axi";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(spi1): spi@700680 {
-+			compatible = "marvell,armada-380-spi";
-+			reg = <0x700680 0x50>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			clock-names = "core", "axi";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(i2c0): i2c@701000 {
-+			compatible = "marvell,mv78230-i2c";
-+			reg = <0x701000 0x20>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(i2c1): i2c@701100 {
-+			compatible = "marvell,mv78230-i2c";
-+			reg = <0x701100 0x20>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(uart0): serial@702000 {
-+			compatible = "snps,dw-apb-uart";
-+			reg = <0x702000 0x100>;
-+			reg-shift = <2>;
-+			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
-+			reg-io-width = <1>;
-+			clock-names = "baudclk", "apb_pclk";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(uart1): serial@702100 {
-+			compatible = "snps,dw-apb-uart";
-+			reg = <0x702100 0x100>;
-+			reg-shift = <2>;
-+			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
-+			reg-io-width = <1>;
-+			clock-names = "baudclk", "apb_pclk";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(uart2): serial@702200 {
-+			compatible = "snps,dw-apb-uart";
-+			reg = <0x702200 0x100>;
-+			reg-shift = <2>;
-+			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
-+			reg-io-width = <1>;
-+			clock-names = "baudclk", "apb_pclk";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(uart3): serial@702300 {
-+			compatible = "snps,dw-apb-uart";
-+			reg = <0x702300 0x100>;
-+			reg-shift = <2>;
-+			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
-+			reg-io-width = <1>;
-+			clock-names = "baudclk", "apb_pclk";
-+			clocks = <&CP11X_LABEL(clk) 1 21>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(nand_controller): nand@720000 {
-+			/*
-+			 * Due to the limitation of the pins available
-+			 * this controller is only usable on the CPM
-+			 * for A7K and on the CPS for A8K.
-+			 */
-+			compatible = "marvell,armada-8k-nand-controller",
-+				"marvell,armada370-nand-controller";
-+			reg = <0x720000 0x54>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 2>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(trng): trng@760000 {
-+			compatible = "marvell,armada-8k-rng",
-+			"inside-secure,safexcel-eip76";
-+			reg = <0x760000 0x7d>;
-+			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 25>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			status = "okay";
-+		};
-+
-+		CP11X_LABEL(sdhci0): sdhci@780000 {
-+			compatible = "marvell,armada-cp110-sdhci";
-+			reg = <0x780000 0x300>;
-+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "core", "axi";
-+			clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
-+			dma-coherent;
-+			status = "disabled";
-+		};
-+
-+		CP11X_LABEL(crypto): crypto@800000 {
-+			compatible = "inside-secure,safexcel-eip197b";
-+			reg = <0x800000 0x200000>;
-+			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-+				<88 IRQ_TYPE_LEVEL_HIGH>,
-+				<89 IRQ_TYPE_LEVEL_HIGH>,
-+				<90 IRQ_TYPE_LEVEL_HIGH>,
-+				<91 IRQ_TYPE_LEVEL_HIGH>,
-+				<92 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "mem", "ring0", "ring1",
-+				"ring2", "ring3", "eip";
-+			clock-names = "core", "reg";
-+			clocks = <&CP11X_LABEL(clk) 1 26>,
-+				 <&CP11X_LABEL(clk) 1 17>;
-+			dma-coherent;
-+		};
-+	};
-+
-+	CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
-+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+		reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
-+		      <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
-+		reg-names = "ctrl", "config";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		#interrupt-cells = <1>;
-+		device_type = "pci";
-+		dma-coherent;
-+		msi-parent = <&gic_v2m0>;
-+
-+		bus-range = <0 0xff>;
-+		ranges =
-+		/* downstream I/O */
-+		<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0  CP11X_PCIEx_IO_BASE(0) 0 0x10000
-+		/* non-prefetchable memory */
-+		0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+		interrupt-map-mask = <0 0 0 0>;
-+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-+		num-lanes = <1>;
-+		clock-names = "core", "reg";
-+		clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
-+		status = "disabled";
-+	};
-+
-+	CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
-+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+		reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
-+		      <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
-+		reg-names = "ctrl", "config";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		#interrupt-cells = <1>;
-+		device_type = "pci";
-+		dma-coherent;
-+		msi-parent = <&gic_v2m0>;
-+
-+		bus-range = <0 0xff>;
-+		ranges =
-+		/* downstream I/O */
-+		<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0  CP11X_PCIEx_IO_BASE(1) 0 0x10000
-+		/* non-prefetchable memory */
-+		0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+		interrupt-map-mask = <0 0 0 0>;
-+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-+
-+		num-lanes = <1>;
-+		clock-names = "core", "reg";
-+		clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
-+		status = "disabled";
-+	};
-+
-+	CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
-+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+		reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
-+		      <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
-+		reg-names = "ctrl", "config";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		#interrupt-cells = <1>;
-+		device_type = "pci";
-+		dma-coherent;
-+		msi-parent = <&gic_v2m0>;
-+
-+		bus-range = <0 0xff>;
-+		ranges =
-+		/* downstream I/O */
-+		<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0  CP11X_PCIEx_IO_BASE(2) 0 0x10000
-+		/* non-prefetchable memory */
-+		0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+		interrupt-map-mask = <0 0 0 0>;
-+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-+
-+		num-lanes = <1>;
-+		clock-names = "core", "reg";
-+		clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
-+		status = "disabled";
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch b/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
deleted file mode 100644
index f6ce6163cf..0000000000
--- a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
+++ /dev/null
@@ -1,95 +0,0 @@ 
-From ff519e2acd463bff6c5bb4e8d7ed350c9bae885b Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:21 +0200
-Subject: [PATCH 1/7] net: mvneta: introduce mvneta_update_stats routine
-
-Introduce mvneta_update_stats routine to collect {rx/tx} statistics
-(packets and bytes). This is a preliminary patch to add XDP support to
-mvneta driver
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 43 ++++++++++++++-------------
- 1 file changed, 22 insertions(+), 21 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -1913,6 +1913,23 @@ static void mvneta_rxq_drop_pkts(struct
- 	}
- }
- 
-+static void
-+mvneta_update_stats(struct mvneta_port *pp, u32 pkts,
-+		    u32 len, bool tx)
-+{
-+	struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
-+
-+	u64_stats_update_begin(&stats->syncp);
-+	if (tx) {
-+		stats->tx_packets += pkts;
-+		stats->tx_bytes += len;
-+	} else {
-+		stats->rx_packets += pkts;
-+		stats->rx_bytes += len;
-+	}
-+	u64_stats_update_end(&stats->syncp);
-+}
-+
- static inline
- int mvneta_rx_refill_queue(struct mvneta_port *pp, struct mvneta_rx_queue *rxq)
- {
-@@ -2093,14 +2110,8 @@ static int mvneta_rx_swbm(struct napi_st
- 		rxq->left_size = 0;
- 	}
- 
--	if (rcvd_pkts) {
--		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
--		u64_stats_update_begin(&stats->syncp);
--		stats->rx_packets += rcvd_pkts;
--		stats->rx_bytes   += rcvd_bytes;
--		u64_stats_update_end(&stats->syncp);
--	}
-+	if (rcvd_pkts)
-+		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
- 
- 	/* return some buffers to hardware queue, one at a time is too slow */
- 	refill = mvneta_rx_refill_queue(pp, rxq);
-@@ -2223,14 +2234,8 @@ err_drop_frame:
- 		napi_gro_receive(napi, skb);
- 	}
- 
--	if (rcvd_pkts) {
--		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
--		u64_stats_update_begin(&stats->syncp);
--		stats->rx_packets += rcvd_pkts;
--		stats->rx_bytes   += rcvd_bytes;
--		u64_stats_update_end(&stats->syncp);
--	}
-+	if (rcvd_pkts)
-+		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
- 
- 	/* Update rxq management counters */
- 	mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
-@@ -2476,7 +2481,6 @@ static netdev_tx_t mvneta_tx(struct sk_b
- 
- out:
- 	if (frags > 0) {
--		struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
- 		struct netdev_queue *nq = netdev_get_tx_queue(dev, txq_id);
- 
- 		netdev_tx_sent_queue(nq, len);
-@@ -2491,10 +2495,7 @@ out:
- 		else
- 			txq->pending += frags;
- 
--		u64_stats_update_begin(&stats->syncp);
--		stats->tx_packets++;
--		stats->tx_bytes  += len;
--		u64_stats_update_end(&stats->syncp);
-+		mvneta_update_stats(pp, 1, len, true);
- 	} else {
- 		dev->stats.tx_dropped++;
- 		dev_kfree_skb_any(skb);
diff --git a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch b/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
deleted file mode 100644
index 72b46f51a7..0000000000
--- a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
+++ /dev/null
@@ -1,102 +0,0 @@ 
-From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:24 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for AP807/AP807-quad
-
-Describe AP807 and AP807-quad support.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../boot/dts/marvell/armada-ap807-quad.dtsi   | 51 +++++++++++++++++++
- arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++
- 2 files changed, 80 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-@@ -0,0 +1,51 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for Marvell Armada AP807 Quad
-+ *
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ */
-+
-+#include "armada-ap807.dtsi"
-+
-+/ {
-+	model = "Marvell Armada AP807 Quad";
-+	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72", "arm,armv8";
-+			reg = <0x000>;
-+			enable-method = "psci";
-+			#cooling-cells = <2>;
-+			clocks = <&cpu_clk 0>;
-+		};
-+		cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72", "arm,armv8";
-+			reg = <0x001>;
-+			enable-method = "psci";
-+			#cooling-cells = <2>;
-+			clocks = <&cpu_clk 0>;
-+		};
-+		cpu2: cpu@100 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72", "arm,armv8";
-+			reg = <0x100>;
-+			enable-method = "psci";
-+			#cooling-cells = <2>;
-+			clocks = <&cpu_clk 1>;
-+		};
-+		cpu3: cpu@101 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72", "arm,armv8";
-+			reg = <0x101>;
-+			enable-method = "psci";
-+			#cooling-cells = <2>;
-+			clocks = <&cpu_clk 1>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
-@@ -0,0 +1,29 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for Marvell Armada AP807
-+ *
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ */
-+
-+#define AP_NAME		ap807
-+#include "armada-ap80x.dtsi"
-+
-+/ {
-+	model = "Marvell Armada AP807";
-+	compatible = "marvell,armada-ap807";
-+};
-+
-+&ap_syscon0 {
-+	ap_clk: clock {
-+		compatible = "marvell,ap807-clock";
-+		#clock-cells = <1>;
-+	};
-+};
-+
-+&ap_syscon1 {
-+	cpu_clk: clock-cpu {
-+		compatible = "marvell,ap807-cpu-clock";
-+		clocks = <&ap_clk 0>, <&ap_clk 1>;
-+		#clock-cells = <1>;
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch b/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
deleted file mode 100644
index fbcae20f74..0000000000
--- a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
+++ /dev/null
@@ -1,181 +0,0 @@ 
-From 568a3fa24a95476d40afe3f8616bafb543bc4182 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:22 +0200
-Subject: [PATCH 2/7] net: mvneta: introduce page pool API for sw buffer
- manager
-
-Use the page_pool api for allocations and DMA handling instead of
-__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
-Pages are unmapped using page_pool_release_page before packets
-go into the network stack.
-
-The page_pool API offers buffer recycling capabilities for XDP but
-allocates one page per packet, unless the driver splits and manages
-the allocated page.
-This is a preliminary patch to add XDP support to mvneta driver
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/Kconfig  |  1 +
- drivers/net/ethernet/marvell/mvneta.c | 83 +++++++++++++++++++++------
- 2 files changed, 65 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/marvell/Kconfig
-+++ b/drivers/net/ethernet/marvell/Kconfig
-@@ -61,6 +61,7 @@ config MVNETA
- 	depends on ARCH_MVEBU || COMPILE_TEST
- 	select MVMDIO
- 	select PHYLINK
-+	select PAGE_POOL
- 	---help---
- 	  This driver supports the network interface units in the
- 	  Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -37,6 +37,7 @@
- #include <net/ip.h>
- #include <net/ipv6.h>
- #include <net/tso.h>
-+#include <net/page_pool.h>
- 
- /* Registers */
- #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
-@@ -607,6 +608,10 @@ struct mvneta_rx_queue {
- 	u32 pkts_coal;
- 	u32 time_coal;
- 
-+	/* page_pool */
-+	struct page_pool *page_pool;
-+	struct xdp_rxq_info xdp_rxq;
-+
- 	/* Virtual address of the RX buffer */
- 	void  **buf_virt_addr;
- 
-@@ -1825,23 +1830,21 @@ static int mvneta_rx_refill(struct mvnet
- 			    struct mvneta_rx_queue *rxq,
- 			    gfp_t gfp_mask)
- {
-+	enum dma_data_direction dma_dir;
- 	dma_addr_t phys_addr;
- 	struct page *page;
- 
--	page = __dev_alloc_page(gfp_mask);
-+	page = page_pool_alloc_pages(rxq->page_pool,
-+				     gfp_mask | __GFP_NOWARN);
- 	if (!page)
- 		return -ENOMEM;
- 
--	/* map page for use */
--	phys_addr = dma_map_page(pp->dev->dev.parent, page, 0, PAGE_SIZE,
--				 DMA_FROM_DEVICE);
--	if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) {
--		__free_page(page);
--		return -ENOMEM;
--	}
--
--	phys_addr += pp->rx_offset_correction;
-+	phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
-+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+	dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
-+				   PAGE_SIZE, dma_dir);
- 	mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
-+
- 	return 0;
- }
- 
-@@ -1907,10 +1910,12 @@ static void mvneta_rxq_drop_pkts(struct
- 		if (!data || !(rx_desc->buf_phys_addr))
- 			continue;
- 
--		dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr,
--			       PAGE_SIZE, DMA_FROM_DEVICE);
--		__free_page(data);
-+		page_pool_put_page(rxq->page_pool, data, false);
- 	}
-+	if (xdp_rxq_info_is_reg(&rxq->xdp_rxq))
-+		xdp_rxq_info_unreg(&rxq->xdp_rxq);
-+	page_pool_destroy(rxq->page_pool);
-+	rxq->page_pool = NULL;
- }
- 
- static void
-@@ -2047,8 +2052,7 @@ static int mvneta_rx_swbm(struct napi_st
- 				skb_add_rx_frag(rxq->skb, frag_num, page,
- 						frag_offset, frag_size,
- 						PAGE_SIZE);
--				dma_unmap_page(dev->dev.parent, phys_addr,
--					       PAGE_SIZE, DMA_FROM_DEVICE);
-+				page_pool_release_page(rxq->page_pool, page);
- 				rxq->left_size -= frag_size;
- 			}
- 		} else {
-@@ -2078,9 +2082,7 @@ static int mvneta_rx_swbm(struct napi_st
- 						frag_offset, frag_size,
- 						PAGE_SIZE);
- 
--				dma_unmap_page(dev->dev.parent, phys_addr,
--					       PAGE_SIZE, DMA_FROM_DEVICE);
--
-+				page_pool_release_page(rxq->page_pool, page);
- 				rxq->left_size -= frag_size;
- 			}
- 		} /* Middle or Last descriptor */
-@@ -2847,11 +2849,54 @@ static int mvneta_poll(struct napi_struc
- 	return rx_done;
- }
- 
-+static int mvneta_create_page_pool(struct mvneta_port *pp,
-+				   struct mvneta_rx_queue *rxq, int size)
-+{
-+	struct page_pool_params pp_params = {
-+		.order = 0,
-+		.flags = PP_FLAG_DMA_MAP,
-+		.pool_size = size,
-+		.nid = cpu_to_node(0),
-+		.dev = pp->dev->dev.parent,
-+		.dma_dir = DMA_FROM_DEVICE,
-+	};
-+	int err;
-+
-+	rxq->page_pool = page_pool_create(&pp_params);
-+	if (IS_ERR(rxq->page_pool)) {
-+		err = PTR_ERR(rxq->page_pool);
-+		rxq->page_pool = NULL;
-+		return err;
-+	}
-+
-+	err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id);
-+	if (err < 0)
-+		goto err_free_pp;
-+
-+	err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL,
-+					 rxq->page_pool);
-+	if (err)
-+		goto err_unregister_rxq;
-+
-+	return 0;
-+
-+err_unregister_rxq:
-+	xdp_rxq_info_unreg(&rxq->xdp_rxq);
-+err_free_pp:
-+	page_pool_destroy(rxq->page_pool);
-+	rxq->page_pool = NULL;
-+	return err;
-+}
-+
- /* Handle rxq fill: allocates rxq skbs; called when initializing a port */
- static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
- 			   int num)
- {
--	int i;
-+	int i, err;
-+
-+	err = mvneta_create_page_pool(pp, rxq, num);
-+	if (err < 0)
-+		return err;
- 
- 	for (i = 0; i < num; i++) {
- 		memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc));
diff --git a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch b/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
deleted file mode 100644
index 6192f5f202..0000000000
--- a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
+++ /dev/null
@@ -1,87 +0,0 @@ 
-From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00 2001
-From: Grzegorz Jaszczyk <jaz@semihalf.com>
-Date: Fri, 4 Oct 2019 16:27:27 +0200
-Subject: [PATCH] arm64: dts: marvell: Add AP807-quad cache description
-
-Adding appropriate entries to device-tree allows the cache description
-to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/.
-
-Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../boot/dts/marvell/armada-ap807-quad.dtsi   | 42 +++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-@@ -22,6 +22,13 @@
- 			enable-method = "psci";
- 			#cooling-cells = <2>;
- 			clocks = <&cpu_clk 0>;
-+			i-cache-size = <0xc000>;
-+			i-cache-line-size = <64>;
-+			i-cache-sets = <256>;
-+			d-cache-size = <0x8000>;
-+			d-cache-line-size = <64>;
-+			d-cache-sets = <256>;
-+			next-level-cache = <&l2_0>;
- 		};
- 		cpu1: cpu@1 {
- 			device_type = "cpu";
-@@ -30,6 +37,13 @@
- 			enable-method = "psci";
- 			#cooling-cells = <2>;
- 			clocks = <&cpu_clk 0>;
-+			i-cache-size = <0xc000>;
-+			i-cache-line-size = <64>;
-+			i-cache-sets = <256>;
-+			d-cache-size = <0x8000>;
-+			d-cache-line-size = <64>;
-+			d-cache-sets = <256>;
-+			next-level-cache = <&l2_0>;
- 		};
- 		cpu2: cpu@100 {
- 			device_type = "cpu";
-@@ -38,6 +52,13 @@
- 			enable-method = "psci";
- 			#cooling-cells = <2>;
- 			clocks = <&cpu_clk 1>;
-+			i-cache-size = <0xc000>;
-+			i-cache-line-size = <64>;
-+			i-cache-sets = <256>;
-+			d-cache-size = <0x8000>;
-+			d-cache-line-size = <64>;
-+			d-cache-sets = <256>;
-+			next-level-cache = <&l2_1>;
- 		};
- 		cpu3: cpu@101 {
- 			device_type = "cpu";
-@@ -46,6 +67,27 @@
- 			enable-method = "psci";
- 			#cooling-cells = <2>;
- 			clocks = <&cpu_clk 1>;
-+			i-cache-size = <0xc000>;
-+			i-cache-line-size = <64>;
-+			i-cache-sets = <256>;
-+			d-cache-size = <0x8000>;
-+			d-cache-line-size = <64>;
-+			d-cache-sets = <256>;
-+			next-level-cache = <&l2_1>;
-+		};
-+
-+		l2_0: l2-cache0 {
-+			compatible = "cache";
-+			cache-size = <0x80000>;
-+			cache-line-size = <64>;
-+			cache-sets = <512>;
-+		};
-+
-+		l2_1: l2-cache1 {
-+			compatible = "cache";
-+			cache-size = <0x80000>;
-+			cache-line-size = <64>;
-+			cache-sets = <512>;
- 		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch b/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
deleted file mode 100644
index 869b22eefb..0000000000
--- a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
+++ /dev/null
@@ -1,303 +0,0 @@ 
-From 8dc9a0888f4c8e27b25e48ff1b4bc2b3a845cc2d Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:23 +0200
-Subject: [PATCH 3/7] net: mvneta: rely on build_skb in mvneta_rx_swbm poll
- routine
-
-Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
-mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
-allocate skb since the previous patch introduced buffer recycling using
-the page_pool API.
-This patch fixes even an issue in the original driver where dma buffers
-are accessed before dma sync.
-mvneta driver can run on not cache coherent devices so it is
-necessary to sync DMA buffers before sending them to the device
-in order to avoid memory corruptions. Running perf analysis we can
-see a performance cost associated with this DMA-sync (anyway it is
-already there in the original driver code). In follow up patches we
-will add more logic to reduce DMA-sync as much as possible.
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 185 +++++++++++++-------------
- 1 file changed, 95 insertions(+), 90 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -325,6 +325,11 @@
- 	      ETH_HLEN + ETH_FCS_LEN,			     \
- 	      cache_line_size())
- 
-+#define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
-+			 NET_SKB_PAD))
-+#define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
-+#define MVNETA_MAX_RX_BUF_SIZE	(PAGE_SIZE - MVNETA_SKB_PAD)
-+
- #define IS_TSO_HEADER(txq, addr) \
- 	((addr >= txq->tso_hdrs_phys) && \
- 	 (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
-@@ -650,7 +655,6 @@ static int txq_number = 8;
- static int rxq_def;
- 
- static int rx_copybreak __read_mostly = 256;
--static int rx_header_size __read_mostly = 128;
- 
- /* HW BM need that each port be identify by a unique ID */
- static int global_port_id;
-@@ -1842,7 +1846,7 @@ static int mvneta_rx_refill(struct mvnet
- 	phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
- 	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
- 	dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
--				   PAGE_SIZE, dma_dir);
-+				   MVNETA_MAX_RX_BUF_SIZE, dma_dir);
- 	mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
- 
- 	return 0;
-@@ -1960,30 +1964,102 @@ int mvneta_rx_refill_queue(struct mvneta
- 	return i;
- }
- 
-+static int
-+mvneta_swbm_rx_frame(struct mvneta_port *pp,
-+		     struct mvneta_rx_desc *rx_desc,
-+		     struct mvneta_rx_queue *rxq,
-+		     struct page *page)
-+{
-+	unsigned char *data = page_address(page);
-+	int data_len = -MVNETA_MH_SIZE, len;
-+	struct net_device *dev = pp->dev;
-+	enum dma_data_direction dma_dir;
-+
-+	if (MVNETA_SKB_SIZE(rx_desc->data_size) > PAGE_SIZE) {
-+		len = MVNETA_MAX_RX_BUF_SIZE;
-+		data_len += len;
-+	} else {
-+		len = rx_desc->data_size;
-+		data_len += len - ETH_FCS_LEN;
-+	}
-+
-+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+	dma_sync_single_for_cpu(dev->dev.parent,
-+				rx_desc->buf_phys_addr,
-+				len, dma_dir);
-+
-+	rxq->skb = build_skb(data, PAGE_SIZE);
-+	if (unlikely(!rxq->skb)) {
-+		netdev_err(dev,
-+			   "Can't allocate skb on queue %d\n",
-+			   rxq->id);
-+		dev->stats.rx_dropped++;
-+		rxq->skb_alloc_err++;
-+		return -ENOMEM;
-+	}
-+	page_pool_release_page(rxq->page_pool, page);
-+
-+	skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
-+	skb_put(rxq->skb, data_len);
-+	mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
-+
-+	rxq->left_size = rx_desc->data_size - len;
-+	rx_desc->buf_phys_addr = 0;
-+
-+	return 0;
-+}
-+
-+static void
-+mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
-+			    struct mvneta_rx_desc *rx_desc,
-+			    struct mvneta_rx_queue *rxq,
-+			    struct page *page)
-+{
-+	struct net_device *dev = pp->dev;
-+	enum dma_data_direction dma_dir;
-+	int data_len, len;
-+
-+	if (rxq->left_size > MVNETA_MAX_RX_BUF_SIZE) {
-+		len = MVNETA_MAX_RX_BUF_SIZE;
-+		data_len = len;
-+	} else {
-+		len = rxq->left_size;
-+		data_len = len - ETH_FCS_LEN;
-+	}
-+	dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+	dma_sync_single_for_cpu(dev->dev.parent,
-+				rx_desc->buf_phys_addr,
-+				len, dma_dir);
-+	if (data_len > 0) {
-+		/* refill descriptor with new buffer later */
-+		skb_add_rx_frag(rxq->skb,
-+				skb_shinfo(rxq->skb)->nr_frags,
-+				page, NET_SKB_PAD, data_len,
-+				PAGE_SIZE);
-+	}
-+	page_pool_release_page(rxq->page_pool, page);
-+	rx_desc->buf_phys_addr = 0;
-+	rxq->left_size -= len;
-+}
-+
- /* Main rx processing when using software buffer management */
- static int mvneta_rx_swbm(struct napi_struct *napi,
- 			  struct mvneta_port *pp, int budget,
- 			  struct mvneta_rx_queue *rxq)
- {
-+	int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
- 	struct net_device *dev = pp->dev;
--	int rx_todo, rx_proc;
--	int refill = 0;
--	u32 rcvd_pkts = 0;
--	u32 rcvd_bytes = 0;
-+	int rx_todo, refill;
- 
- 	/* Get number of received packets */
- 	rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
--	rx_proc = 0;
- 
- 	/* Fairness NAPI loop */
--	while ((rcvd_pkts < budget) && (rx_proc < rx_todo)) {
-+	while (rx_proc < budget && rx_proc < rx_todo) {
- 		struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
-+		u32 rx_status, index;
- 		unsigned char *data;
- 		struct page *page;
--		dma_addr_t phys_addr;
--		u32 rx_status, index;
--		int rx_bytes, skb_size, copy_size;
--		int frag_num, frag_size, frag_offset;
- 
- 		index = rx_desc - rxq->descs;
- 		page = (struct page *)rxq->buf_virt_addr[index];
-@@ -1991,100 +2067,30 @@ static int mvneta_rx_swbm(struct napi_st
- 		/* Prefetch header */
- 		prefetch(data);
- 
--		phys_addr = rx_desc->buf_phys_addr;
- 		rx_status = rx_desc->status;
- 		rx_proc++;
- 		rxq->refill_num++;
- 
- 		if (rx_status & MVNETA_RXD_FIRST_DESC) {
-+			int err;
-+
- 			/* Check errors only for FIRST descriptor */
- 			if (rx_status & MVNETA_RXD_ERR_SUMMARY) {
- 				mvneta_rx_error(pp, rx_desc);
- 				/* leave the descriptor untouched */
- 				continue;
- 			}
--			rx_bytes = rx_desc->data_size -
--				   (ETH_FCS_LEN + MVNETA_MH_SIZE);
--
--			/* Allocate small skb for each new packet */
--			skb_size = max(rx_copybreak, rx_header_size);
--			rxq->skb = netdev_alloc_skb_ip_align(dev, skb_size);
--			if (unlikely(!rxq->skb)) {
--				struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
--				netdev_err(dev,
--					   "Can't allocate skb on queue %d\n",
--					   rxq->id);
--
--				rxq->skb_alloc_err++;
- 
--				u64_stats_update_begin(&stats->syncp);
--				stats->rx_dropped++;
--				u64_stats_update_end(&stats->syncp);
-+			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
-+			if (err)
- 				continue;
--			}
--			copy_size = min(skb_size, rx_bytes);
--
--			/* Copy data from buffer to SKB, skip Marvell header */
--			memcpy(rxq->skb->data, data + MVNETA_MH_SIZE,
--			       copy_size);
--			skb_put(rxq->skb, copy_size);
--			rxq->left_size = rx_bytes - copy_size;
--
--			mvneta_rx_csum(pp, rx_status, rxq->skb);
--			if (rxq->left_size == 0) {
--				int size = copy_size + MVNETA_MH_SIZE;
--
--				dma_sync_single_range_for_cpu(dev->dev.parent,
--							      phys_addr, 0,
--							      size,
--							      DMA_FROM_DEVICE);
--
--				/* leave the descriptor and buffer untouched */
--			} else {
--				/* refill descriptor with new buffer later */
--				rx_desc->buf_phys_addr = 0;
--
--				frag_num = 0;
--				frag_offset = copy_size + MVNETA_MH_SIZE;
--				frag_size = min(rxq->left_size,
--						(int)(PAGE_SIZE - frag_offset));
--				skb_add_rx_frag(rxq->skb, frag_num, page,
--						frag_offset, frag_size,
--						PAGE_SIZE);
--				page_pool_release_page(rxq->page_pool, page);
--				rxq->left_size -= frag_size;
--			}
- 		} else {
--			/* Middle or Last descriptor */
- 			if (unlikely(!rxq->skb)) {
- 				pr_debug("no skb for rx_status 0x%x\n",
- 					 rx_status);
- 				continue;
- 			}
--			if (!rxq->left_size) {
--				/* last descriptor has only FCS */
--				/* and can be discarded */
--				dma_sync_single_range_for_cpu(dev->dev.parent,
--							      phys_addr, 0,
--							      ETH_FCS_LEN,
--							      DMA_FROM_DEVICE);
--				/* leave the descriptor and buffer untouched */
--			} else {
--				/* refill descriptor with new buffer later */
--				rx_desc->buf_phys_addr = 0;
--
--				frag_num = skb_shinfo(rxq->skb)->nr_frags;
--				frag_offset = 0;
--				frag_size = min(rxq->left_size,
--						(int)(PAGE_SIZE - frag_offset));
--				skb_add_rx_frag(rxq->skb, frag_num, page,
--						frag_offset, frag_size,
--						PAGE_SIZE);
--
--				page_pool_release_page(rxq->page_pool, page);
--				rxq->left_size -= frag_size;
--			}
-+			mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq, page);
- 		} /* Middle or Last descriptor */
- 
- 		if (!(rx_status & MVNETA_RXD_LAST_DESC))
-@@ -2109,7 +2115,6 @@ static int mvneta_rx_swbm(struct napi_st
- 
- 		/* clean uncomplete skb pointer in queue */
- 		rxq->skb = NULL;
--		rxq->left_size = 0;
- 	}
- 
- 	if (rcvd_pkts)
-@@ -2970,7 +2975,7 @@ static void mvneta_rxq_hw_init(struct mv
- 		/* Set Offset */
- 		mvneta_rxq_offset_set(pp, rxq, 0);
- 		mvneta_rxq_buf_size_set(pp, rxq, PAGE_SIZE < SZ_64K ?
--					PAGE_SIZE :
-+					MVNETA_MAX_RX_BUF_SIZE :
- 					MVNETA_RX_BUF_SIZE(pp->pkt_size));
- 		mvneta_rxq_bm_disable(pp, rxq);
- 		mvneta_rxq_fill(pp, rxq, rxq->size);
-@@ -4713,7 +4718,7 @@ static int mvneta_probe(struct platform_
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 
- 	pp->id = global_port_id++;
--	pp->rx_offset_correction = 0; /* not relevant for SW BM */
-+	pp->rx_offset_correction = NET_SKB_PAD;
- 
- 	/* Obtain access to BM resources if enabled and already initialized */
- 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
diff --git a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch b/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
deleted file mode 100644
index e06928d130..0000000000
--- a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
+++ /dev/null
@@ -1,135 +0,0 @@ 
-From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:30 +0200
-Subject: [PATCH] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
-
-As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to
-RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory
-range. This shows that I/O memory has never been used/working on the
-old SoCs despite the region being advertised. As PCIe I/O ranges will
-not be supported in newer SoCs using CP11x co-processors, let's
-simply drop them. It is not harmful in any case as PCIe device drivers
-can do it all with the regular mapped memory anyway.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi     |  2 --
- .../boot/dts/marvell/armada-8040-mcbin.dtsi      |  3 +--
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi     |  4 ----
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi    | 16 +++-------------
- 4 files changed, 4 insertions(+), 21 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -19,7 +19,6 @@
-  */
- #define CP11X_NAME		cp0
- #define CP11X_BASE		f2000000
--#define CP11X_PCIE_IO_BASE	0xf9000000
- #define CP11X_PCIE_MEM_BASE	0xf6000000
- #define CP11X_PCIE0_BASE	f2600000
- #define CP11X_PCIE1_BASE	f2620000
-@@ -29,7 +28,6 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
-@@ -179,8 +179,7 @@
- 	num-lanes = <4>;
- 	num-viewport = <8>;
- 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
--	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
--		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
-+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
- 	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
- 	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
- 	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -21,7 +21,6 @@
-  */
- #define CP11X_NAME		cp0
- #define CP11X_BASE		f2000000
--#define CP11X_PCIE_IO_BASE	0xf9000000
- #define CP11X_PCIE_MEM_BASE	0xf6000000
- #define CP11X_PCIE0_BASE	f2600000
- #define CP11X_PCIE1_BASE	f2620000
-@@ -31,7 +30,6 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
-@@ -42,7 +40,6 @@
-  */
- #define CP11X_NAME		cp1
- #define CP11X_BASE		f4000000
--#define CP11X_PCIE_IO_BASE	0xfd000000
- #define CP11X_PCIE_MEM_BASE	0xfa000000
- #define CP11X_PCIE0_BASE	f4600000
- #define CP11X_PCIE1_BASE	f4620000
-@@ -52,7 +49,6 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -10,7 +10,6 @@
- 
- #include "armada-common.dtsi"
- 
--#define CP11X_PCIEx_IO_BASE(iface)	(CP11X_PCIE_IO_BASE + (iface *  0x10000))
- #define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE + (iface *  0x1000000))
- #define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
- 
-@@ -507,11 +506,8 @@
- 		msi-parent = <&gic_v2m0>;
- 
- 		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0  CP11X_PCIEx_IO_BASE(0) 0 0x10000
- 		/* non-prefetchable memory */
--		0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-@@ -534,11 +530,8 @@
- 		msi-parent = <&gic_v2m0>;
- 
- 		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0  CP11X_PCIEx_IO_BASE(1) 0 0x10000
- 		/* non-prefetchable memory */
--		0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-@@ -562,11 +555,8 @@
- 		msi-parent = <&gic_v2m0>;
- 
- 		bus-range = <0 0xff>;
--		ranges =
--		/* downstream I/O */
--		<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0  CP11X_PCIEx_IO_BASE(2) 0 0x10000
- 		/* non-prefetchable memory */
--		0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch b/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
deleted file mode 100644
index 33a7a27f43..0000000000
--- a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
+++ /dev/null
@@ -1,311 +0,0 @@ 
-From 0db51da7a8e99f0803ec3a8e25c1a66234a219cb Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:24 +0200
-Subject: [PATCH 4/7] net: mvneta: add basic XDP support
-
-Add basic XDP support to mvneta driver for devices that rely on software
-buffer management. Currently supported verdicts are:
-- XDP_DROP
-- XDP_PASS
-- XDP_REDIRECT
-- XDP_ABORTED
-
-- iptables drop:
-$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
-$nstat -n && sleep 1 && nstat
-IpInReceives		151169		0.0
-IpExtInOctets		6953544		0.0
-IpExtInNoECTPkts	151165		0.0
-
-- XDP_DROP via xdp1
-$./samples/bpf/xdp1 3
-proto 0:	421419 pkt/s
-proto 0:	421444 pkt/s
-proto 0:	421393 pkt/s
-proto 0:	421440 pkt/s
-proto 0:	421184 pkt/s
-
-Tested-by: Matteo Croce <mcroce@redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 148 ++++++++++++++++++++++++--
- 1 file changed, 139 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -38,6 +38,7 @@
- #include <net/ipv6.h>
- #include <net/tso.h>
- #include <net/page_pool.h>
-+#include <linux/bpf_trace.h>
- 
- /* Registers */
- #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
-@@ -325,8 +326,10 @@
- 	      ETH_HLEN + ETH_FCS_LEN,			     \
- 	      cache_line_size())
- 
-+#define MVNETA_SKB_HEADROOM	(max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
-+				 NET_IP_ALIGN)
- #define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
--			 NET_SKB_PAD))
-+			 MVNETA_SKB_HEADROOM))
- #define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
- #define MVNETA_MAX_RX_BUF_SIZE	(PAGE_SIZE - MVNETA_SKB_PAD)
- 
-@@ -354,6 +357,11 @@ struct mvneta_statistic {
- #define T_REG_64	64
- #define T_SW		1
- 
-+#define MVNETA_XDP_PASS		BIT(0)
-+#define MVNETA_XDP_DROPPED	BIT(1)
-+#define MVNETA_XDP_TX		BIT(2)
-+#define MVNETA_XDP_REDIR	BIT(3)
-+
- static const struct mvneta_statistic mvneta_statistics[] = {
- 	{ 0x3000, T_REG_64, "good_octets_received", },
- 	{ 0x3010, T_REG_32, "good_frames_received", },
-@@ -435,6 +443,8 @@ struct mvneta_port {
- 	u32 cause_rx_tx;
- 	struct napi_struct napi;
- 
-+	struct bpf_prog *xdp_prog;
-+
- 	/* Core clock */
- 	struct clk *clk;
- 	/* AXI clock */
-@@ -1965,10 +1975,50 @@ int mvneta_rx_refill_queue(struct mvneta
- }
- 
- static int
-+mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
-+	       struct bpf_prog *prog, struct xdp_buff *xdp)
-+{
-+	u32 ret, act = bpf_prog_run_xdp(prog, xdp);
-+
-+	switch (act) {
-+	case XDP_PASS:
-+		ret = MVNETA_XDP_PASS;
-+		break;
-+	case XDP_REDIRECT: {
-+		int err;
-+
-+		err = xdp_do_redirect(pp->dev, xdp, prog);
-+		if (err) {
-+			ret = MVNETA_XDP_DROPPED;
-+			xdp_return_buff(xdp);
-+		} else {
-+			ret = MVNETA_XDP_REDIR;
-+		}
-+		break;
-+	}
-+	default:
-+		bpf_warn_invalid_xdp_action(act);
-+		/* fall through */
-+	case XDP_ABORTED:
-+		trace_xdp_exception(pp->dev, prog, act);
-+		/* fall through */
-+	case XDP_DROP:
-+		page_pool_recycle_direct(rxq->page_pool,
-+					 virt_to_head_page(xdp->data));
-+		ret = MVNETA_XDP_DROPPED;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static int
- mvneta_swbm_rx_frame(struct mvneta_port *pp,
- 		     struct mvneta_rx_desc *rx_desc,
- 		     struct mvneta_rx_queue *rxq,
--		     struct page *page)
-+		     struct xdp_buff *xdp,
-+		     struct bpf_prog *xdp_prog,
-+		     struct page *page, u32 *xdp_ret)
- {
- 	unsigned char *data = page_address(page);
- 	int data_len = -MVNETA_MH_SIZE, len;
-@@ -1988,7 +2038,26 @@ mvneta_swbm_rx_frame(struct mvneta_port
- 				rx_desc->buf_phys_addr,
- 				len, dma_dir);
- 
--	rxq->skb = build_skb(data, PAGE_SIZE);
-+	xdp->data_hard_start = data;
-+	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
-+	xdp->data_end = xdp->data + data_len;
-+	xdp_set_data_meta_invalid(xdp);
-+
-+	if (xdp_prog) {
-+		u32 ret;
-+
-+		ret = mvneta_run_xdp(pp, rxq, xdp_prog, xdp);
-+		if (ret != MVNETA_XDP_PASS) {
-+			mvneta_update_stats(pp, 1,
-+					    xdp->data_end - xdp->data,
-+					    false);
-+			rx_desc->buf_phys_addr = 0;
-+			*xdp_ret |= ret;
-+			return ret;
-+		}
-+	}
-+
-+	rxq->skb = build_skb(xdp->data_hard_start, PAGE_SIZE);
- 	if (unlikely(!rxq->skb)) {
- 		netdev_err(dev,
- 			   "Can't allocate skb on queue %d\n",
-@@ -1999,8 +2068,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
- 	}
- 	page_pool_release_page(rxq->page_pool, page);
- 
--	skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
--	skb_put(rxq->skb, data_len);
-+	skb_reserve(rxq->skb,
-+		    xdp->data - xdp->data_hard_start);
-+	skb_put(rxq->skb, xdp->data_end - xdp->data);
- 	mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
- 
- 	rxq->left_size = rx_desc->data_size - len;
-@@ -2034,7 +2104,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
- 		/* refill descriptor with new buffer later */
- 		skb_add_rx_frag(rxq->skb,
- 				skb_shinfo(rxq->skb)->nr_frags,
--				page, NET_SKB_PAD, data_len,
-+				page, MVNETA_SKB_HEADROOM, data_len,
- 				PAGE_SIZE);
- 	}
- 	page_pool_release_page(rxq->page_pool, page);
-@@ -2049,11 +2119,18 @@ static int mvneta_rx_swbm(struct napi_st
- {
- 	int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
- 	struct net_device *dev = pp->dev;
-+	struct bpf_prog *xdp_prog;
-+	struct xdp_buff xdp_buf;
- 	int rx_todo, refill;
-+	u32 xdp_ret = 0;
- 
- 	/* Get number of received packets */
- 	rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
- 
-+	rcu_read_lock();
-+	xdp_prog = READ_ONCE(pp->xdp_prog);
-+	xdp_buf.rxq = &rxq->xdp_rxq;
-+
- 	/* Fairness NAPI loop */
- 	while (rx_proc < budget && rx_proc < rx_todo) {
- 		struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
-@@ -2081,7 +2158,8 @@ static int mvneta_rx_swbm(struct napi_st
- 				continue;
- 			}
- 
--			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
-+			err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, &xdp_buf,
-+						   xdp_prog, page, &xdp_ret);
- 			if (err)
- 				continue;
- 		} else {
-@@ -2116,6 +2194,10 @@ static int mvneta_rx_swbm(struct napi_st
- 		/* clean uncomplete skb pointer in queue */
- 		rxq->skb = NULL;
- 	}
-+	rcu_read_unlock();
-+
-+	if (xdp_ret & MVNETA_XDP_REDIR)
-+		xdp_do_flush_map();
- 
- 	if (rcvd_pkts)
- 		mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
-@@ -2857,13 +2939,14 @@ static int mvneta_poll(struct napi_struc
- static int mvneta_create_page_pool(struct mvneta_port *pp,
- 				   struct mvneta_rx_queue *rxq, int size)
- {
-+	struct bpf_prog *xdp_prog = READ_ONCE(pp->xdp_prog);
- 	struct page_pool_params pp_params = {
- 		.order = 0,
- 		.flags = PP_FLAG_DMA_MAP,
- 		.pool_size = size,
- 		.nid = cpu_to_node(0),
- 		.dev = pp->dev->dev.parent,
--		.dma_dir = DMA_FROM_DEVICE,
-+		.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE,
- 	};
- 	int err;
- 
-@@ -3366,6 +3449,11 @@ static int mvneta_change_mtu(struct net_
- 		mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
- 	}
- 
-+	if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) {
-+		netdev_info(dev, "Illegal MTU value %d for XDP mode\n", mtu);
-+		return -EINVAL;
-+	}
-+
- 	dev->mtu = mtu;
- 
- 	if (!netif_running(dev)) {
-@@ -4036,6 +4124,47 @@ static int mvneta_ioctl(struct net_devic
- 	return phylink_mii_ioctl(pp->phylink, ifr, cmd);
- }
- 
-+static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog *prog,
-+			    struct netlink_ext_ack *extack)
-+{
-+	bool need_update, running = netif_running(dev);
-+	struct mvneta_port *pp = netdev_priv(dev);
-+	struct bpf_prog *old_prog;
-+
-+	if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
-+		NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not supported on XDP");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	need_update = !!pp->xdp_prog != !!prog;
-+	if (running && need_update)
-+		mvneta_stop(dev);
-+
-+	old_prog = xchg(&pp->xdp_prog, prog);
-+	if (old_prog)
-+		bpf_prog_put(old_prog);
-+
-+	if (running && need_update)
-+		return mvneta_open(dev);
-+
-+	return 0;
-+}
-+
-+static int mvneta_xdp(struct net_device *dev, struct netdev_bpf *xdp)
-+{
-+	struct mvneta_port *pp = netdev_priv(dev);
-+
-+	switch (xdp->command) {
-+	case XDP_SETUP_PROG:
-+		return mvneta_xdp_setup(dev, xdp->prog, xdp->extack);
-+	case XDP_QUERY_PROG:
-+		xdp->prog_id = pp->xdp_prog ? pp->xdp_prog->aux->id : 0;
-+		return 0;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
- /* Ethtool methods */
- 
- /* Set link ksettings (phy address, speed) for ethtools */
-@@ -4432,6 +4561,7 @@ static const struct net_device_ops mvnet
- 	.ndo_fix_features    = mvneta_fix_features,
- 	.ndo_get_stats64     = mvneta_get_stats64,
- 	.ndo_do_ioctl        = mvneta_ioctl,
-+	.ndo_bpf             = mvneta_xdp,
- };
- 
- static const struct ethtool_ops mvneta_eth_tool_ops = {
-@@ -4718,7 +4848,7 @@ static int mvneta_probe(struct platform_
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 
- 	pp->id = global_port_id++;
--	pp->rx_offset_correction = NET_SKB_PAD;
-+	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- 
- 	/* Obtain access to BM resources if enabled and already initialized */
- 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
diff --git a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch b/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
deleted file mode 100644
index 0dd9e8f90f..0000000000
--- a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
+++ /dev/null
@@ -1,129 +0,0 @@ 
-From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:31 +0200
-Subject: [PATCH] arm64: dts: marvell: Externalize PCIe macros from CP11x file
-
-PCIe macros are specific to CP110 and will not fit CP115
-constraints. To keep the same way the files are organized, just move
-some macros out of the CP11x generic file and define them directly in
-SoC DTSI, instead of defining single addresses in the SoC DTSI and
-reusing them in macros.
-
-In the end:
-* CP11X_PCIE_MEM_BASE SoC define is dropped
-* CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the
-  SoC files as it replaces the above definition.
-* As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with
-  newer SoCs, we put it in the SoC files as well.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |  6 ++++--
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi  | 12 ++++++++----
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  9 ++++-----
- 3 files changed, 16 insertions(+), 11 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -19,7 +19,8 @@
-  */
- #define CP11X_NAME		cp0
- #define CP11X_BASE		f2000000
--#define CP11X_PCIE_MEM_BASE	0xf6000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE	f2600000
- #define CP11X_PCIE1_BASE	f2620000
- #define CP11X_PCIE2_BASE	f2640000
-@@ -28,7 +29,8 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -21,7 +21,8 @@
-  */
- #define CP11X_NAME		cp0
- #define CP11X_BASE		f2000000
--#define CP11X_PCIE_MEM_BASE	0xf6000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE	f2600000
- #define CP11X_PCIE1_BASE	f2620000
- #define CP11X_PCIE2_BASE	f2640000
-@@ -30,7 +31,8 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
-@@ -40,7 +42,8 @@
-  */
- #define CP11X_NAME		cp1
- #define CP11X_BASE		f4000000
--#define CP11X_PCIE_MEM_BASE	0xfa000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE	f4600000
- #define CP11X_PCIE1_BASE	f4620000
- #define CP11X_PCIE2_BASE	f4640000
-@@ -49,7 +52,8 @@
- 
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -10,8 +10,7 @@
- 
- #include "armada-common.dtsi"
- 
--#define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE + (iface *  0x1000000))
--#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
-+#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
- 
- / {
- 	/*
-@@ -507,7 +506,7 @@
- 
- 		bus-range = <0 0xff>;
- 		/* non-prefetchable memory */
--		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-@@ -531,7 +530,7 @@
- 
- 		bus-range = <0 0xff>;
- 		/* non-prefetchable memory */
--		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-@@ -556,7 +555,7 @@
- 
- 		bus-range = <0 0xff>;
- 		/* non-prefetchable memory */
--		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
- 		interrupt-map-mask = <0 0 0 0>;
- 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch b/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
deleted file mode 100644
index 00d2b30d58..0000000000
--- a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
+++ /dev/null
@@ -1,31 +0,0 @@ 
-From 525b0858ff2fdb78defec2d4d6d63baaa423d5fd Mon Sep 17 00:00:00 2001
-From: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Date: Fri, 13 Mar 2020 16:42:44 +1300
-Subject: [PATCH] gpio: mvebu: avoid error message for optional IRQ
-
-platform_get_irq() will generate an error message if the requested irq
-is not present
-
-  mvebu-gpio f1010140.gpio: IRQ index 3 not found
-
-use platform_get_irq_optional() to avoid the error message being
-generated.
-
-Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
----
- drivers/gpio/gpio-mvebu.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -1248,7 +1248,7 @@ static int mvebu_gpio_probe(struct platf
- 	 * pins.
- 	 */
- 	for (i = 0; i < 4; i++) {
--		int irq = platform_get_irq(pdev, i);
-+		int irq = platform_get_irq_optional(pdev, i);
- 
- 		if (irq < 0)
- 			continue;
diff --git a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch b/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
deleted file mode 100644
index e075796e41..0000000000
--- a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
+++ /dev/null
@@ -1,43 +0,0 @@ 
-From fa383f6b77a2ed788266fa8fbfb659aa284d2f58 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:25 +0200
-Subject: [PATCH 5/7] net: mvneta: move header prefetch in mvneta_swbm_rx_frame
-
-Move data buffer prefetch in mvneta_swbm_rx_frame after
-dma_sync_single_range_for_cpu
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2038,6 +2038,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
- 				rx_desc->buf_phys_addr,
- 				len, dma_dir);
- 
-+	/* Prefetch header */
-+	prefetch(data);
-+
- 	xdp->data_hard_start = data;
- 	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
- 	xdp->data_end = xdp->data + data_len;
-@@ -2135,14 +2138,10 @@ static int mvneta_rx_swbm(struct napi_st
- 	while (rx_proc < budget && rx_proc < rx_todo) {
- 		struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
- 		u32 rx_status, index;
--		unsigned char *data;
- 		struct page *page;
- 
- 		index = rx_desc - rxq->descs;
- 		page = (struct page *)rxq->buf_virt_addr[index];
--		data = page_address(page);
--		/* Prefetch header */
--		prefetch(data);
- 
- 		rx_status = rx_desc->status;
- 		rx_proc++;
diff --git a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch b/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
deleted file mode 100644
index c191b3f7df..0000000000
--- a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
+++ /dev/null
@@ -1,25 +0,0 @@ 
-From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:18 +0200
-Subject: [PATCH] arm64: dts: marvell: Enumerate the first AP806 syscon
-
-There are two system controllers in the AP80x, like for ap_syscon1,
-enumerate the first one by renaming it s/ap_syscon/ap_syscon0/.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -246,7 +246,7 @@
- 				status = "disabled";
- 			};
- 
--			ap_syscon: system-controller@6f4000 {
-+			ap_syscon0: system-controller@6f4000 {
- 				compatible = "syscon", "simple-mfd";
- 				reg = <0x6f4000 0x2000>;
- 
diff --git a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch b/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
deleted file mode 100644
index 4698c23be4..0000000000
--- a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
+++ /dev/null
@@ -1,210 +0,0 @@ 
-From 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:26 +0200
-Subject: [PATCH 6/7] net: mvneta: make tx buffer array agnostic
-
-Allow tx buffer array to contain both skb and xdp buffers in order to
-enable xdp frame recycling adding XDP_TX verdict support
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++----------
- 1 file changed, 43 insertions(+), 23 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -565,6 +565,20 @@ struct mvneta_rx_desc {
- };
- #endif
- 
-+enum mvneta_tx_buf_type {
-+	MVNETA_TYPE_SKB,
-+	MVNETA_TYPE_XDP_TX,
-+	MVNETA_TYPE_XDP_NDO,
-+};
-+
-+struct mvneta_tx_buf {
-+	enum mvneta_tx_buf_type type;
-+	union {
-+		struct xdp_frame *xdpf;
-+		struct sk_buff *skb;
-+	};
-+};
-+
- struct mvneta_tx_queue {
- 	/* Number of this TX queue, in the range 0-7 */
- 	u8 id;
-@@ -580,8 +594,8 @@ struct mvneta_tx_queue {
- 	int tx_stop_threshold;
- 	int tx_wake_threshold;
- 
--	/* Array of transmitted skb */
--	struct sk_buff **tx_skb;
-+	/* Array of transmitted buffers */
-+	struct mvneta_tx_buf *buf;
- 
- 	/* Index of last TX DMA descriptor that was inserted */
- 	int txq_put_index;
-@@ -1793,14 +1807,9 @@ static void mvneta_txq_bufs_free(struct
- 	int i;
- 
- 	for (i = 0; i < num; i++) {
-+		struct mvneta_tx_buf *buf = &txq->buf[txq->txq_get_index];
- 		struct mvneta_tx_desc *tx_desc = txq->descs +
- 			txq->txq_get_index;
--		struct sk_buff *skb = txq->tx_skb[txq->txq_get_index];
--
--		if (skb) {
--			bytes_compl += skb->len;
--			pkts_compl++;
--		}
- 
- 		mvneta_txq_inc_get(txq);
- 
-@@ -1808,9 +1817,12 @@ static void mvneta_txq_bufs_free(struct
- 			dma_unmap_single(pp->dev->dev.parent,
- 					 tx_desc->buf_phys_addr,
- 					 tx_desc->data_size, DMA_TO_DEVICE);
--		if (!skb)
-+		if (!buf->skb)
- 			continue;
--		dev_kfree_skb_any(skb);
-+
-+		bytes_compl += buf->skb->len;
-+		pkts_compl++;
-+		dev_kfree_skb_any(buf->skb);
- 	}
- 
- 	netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
-@@ -2335,16 +2347,19 @@ static inline void
- mvneta_tso_put_hdr(struct sk_buff *skb,
- 		   struct mvneta_port *pp, struct mvneta_tx_queue *txq)
- {
--	struct mvneta_tx_desc *tx_desc;
- 	int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
-+	struct mvneta_tx_desc *tx_desc;
- 
--	txq->tx_skb[txq->txq_put_index] = NULL;
- 	tx_desc = mvneta_txq_next_desc_get(txq);
- 	tx_desc->data_size = hdr_len;
- 	tx_desc->command = mvneta_skb_tx_csum(pp, skb);
- 	tx_desc->command |= MVNETA_TXD_F_DESC;
- 	tx_desc->buf_phys_addr = txq->tso_hdrs_phys +
- 				 txq->txq_put_index * TSO_HEADER_SIZE;
-+	buf->type = MVNETA_TYPE_SKB;
-+	buf->skb = NULL;
-+
- 	mvneta_txq_inc_put(txq);
- }
- 
-@@ -2353,6 +2368,7 @@ mvneta_tso_put_data(struct net_device *d
- 		    struct sk_buff *skb, char *data, int size,
- 		    bool last_tcp, bool is_last)
- {
-+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- 	struct mvneta_tx_desc *tx_desc;
- 
- 	tx_desc = mvneta_txq_next_desc_get(txq);
-@@ -2366,7 +2382,8 @@ mvneta_tso_put_data(struct net_device *d
- 	}
- 
- 	tx_desc->command = 0;
--	txq->tx_skb[txq->txq_put_index] = NULL;
-+	buf->type = MVNETA_TYPE_SKB;
-+	buf->skb = NULL;
- 
- 	if (last_tcp) {
- 		/* last descriptor in the TCP packet */
-@@ -2374,7 +2391,7 @@ mvneta_tso_put_data(struct net_device *d
- 
- 		/* last descriptor in SKB */
- 		if (is_last)
--			txq->tx_skb[txq->txq_put_index] = skb;
-+			buf->skb = skb;
- 	}
- 	mvneta_txq_inc_put(txq);
- 	return 0;
-@@ -2459,6 +2476,7 @@ static int mvneta_tx_frag_process(struct
- 	int i, nr_frags = skb_shinfo(skb)->nr_frags;
- 
- 	for (i = 0; i < nr_frags; i++) {
-+		struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- 		void *addr = skb_frag_address(frag);
- 
-@@ -2478,12 +2496,13 @@ static int mvneta_tx_frag_process(struct
- 		if (i == nr_frags - 1) {
- 			/* Last descriptor */
- 			tx_desc->command = MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD;
--			txq->tx_skb[txq->txq_put_index] = skb;
-+			buf->skb = skb;
- 		} else {
- 			/* Descriptor in the middle: Not First, Not Last */
- 			tx_desc->command = 0;
--			txq->tx_skb[txq->txq_put_index] = NULL;
-+			buf->skb = NULL;
- 		}
-+		buf->type = MVNETA_TYPE_SKB;
- 		mvneta_txq_inc_put(txq);
- 	}
- 
-@@ -2511,6 +2530,7 @@ static netdev_tx_t mvneta_tx(struct sk_b
- 	struct mvneta_port *pp = netdev_priv(dev);
- 	u16 txq_id = skb_get_queue_mapping(skb);
- 	struct mvneta_tx_queue *txq = &pp->txqs[txq_id];
-+	struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- 	struct mvneta_tx_desc *tx_desc;
- 	int len = skb->len;
- 	int frags = 0;
-@@ -2543,16 +2563,17 @@ static netdev_tx_t mvneta_tx(struct sk_b
- 		goto out;
- 	}
- 
-+	buf->type = MVNETA_TYPE_SKB;
- 	if (frags == 1) {
- 		/* First and Last descriptor */
- 		tx_cmd |= MVNETA_TXD_FLZ_DESC;
- 		tx_desc->command = tx_cmd;
--		txq->tx_skb[txq->txq_put_index] = skb;
-+		buf->skb = skb;
- 		mvneta_txq_inc_put(txq);
- 	} else {
- 		/* First but not Last */
- 		tx_cmd |= MVNETA_TXD_F_DESC;
--		txq->tx_skb[txq->txq_put_index] = NULL;
-+		buf->skb = NULL;
- 		mvneta_txq_inc_put(txq);
- 		tx_desc->command = tx_cmd;
- 		/* Continue with other skb fragments */
-@@ -3138,9 +3159,8 @@ static int mvneta_txq_sw_init(struct mvn
- 
- 	txq->last_desc = txq->size - 1;
- 
--	txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb),
--				    GFP_KERNEL);
--	if (!txq->tx_skb) {
-+	txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf), GFP_KERNEL);
-+	if (!txq->buf) {
- 		dma_free_coherent(pp->dev->dev.parent,
- 				  txq->size * MVNETA_DESC_ALIGNED_SIZE,
- 				  txq->descs, txq->descs_phys);
-@@ -3152,7 +3172,7 @@ static int mvneta_txq_sw_init(struct mvn
- 					   txq->size * TSO_HEADER_SIZE,
- 					   &txq->tso_hdrs_phys, GFP_KERNEL);
- 	if (!txq->tso_hdrs) {
--		kfree(txq->tx_skb);
-+		kfree(txq->buf);
- 		dma_free_coherent(pp->dev->dev.parent,
- 				  txq->size * MVNETA_DESC_ALIGNED_SIZE,
- 				  txq->descs, txq->descs_phys);
-@@ -3207,7 +3227,7 @@ static void mvneta_txq_sw_deinit(struct
- {
- 	struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);
- 
--	kfree(txq->tx_skb);
-+	kfree(txq->buf);
- 
- 	if (txq->tso_hdrs)
- 		dma_free_coherent(pp->dev->dev.parent,
diff --git a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch b/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
deleted file mode 100644
index bb7863cb5f..0000000000
--- a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
+++ /dev/null
@@ -1,937 +0,0 @@ 
-From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001
-From: Konstantin Porotchkin <kostap@marvell.com>
-Date: Fri, 4 Oct 2019 16:27:22 +0200
-Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807 based
- SoCs
-
-Prepare the support for Marvell AP807 die. This die is very similar to
-AP806 but uses different DDR PHY. AP807 is a major component of CN9130
-SoC series.
-
-Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +----------------
- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++
- 2 files changed, 458 insertions(+), 446 deletions(-)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -5,454 +5,10 @@
-  * Device Tree file for Marvell Armada AP806.
-  */
- 
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/thermal/thermal.h>
--
--/dts-v1/;
-+#define AP_NAME		ap806
-+#include "armada-ap80x.dtsi"
- 
- / {
- 	model = "Marvell Armada AP806";
- 	compatible = "marvell,armada-ap806";
--	#address-cells = <2>;
--	#size-cells = <2>;
--
--	aliases {
--		serial0 = &uart0;
--		serial1 = &uart1;
--		gpio0 = &ap_gpio;
--		spi0 = &spi0;
--	};
--
--	psci {
--		compatible = "arm,psci-0.2";
--		method = "smc";
--	};
--
--	reserved-memory {
--		#address-cells = <2>;
--		#size-cells = <2>;
--		ranges;
--
--		/*
--		 * This area matches the mapping done with a
--		 * mainline U-Boot, and should be updated by the
--		 * bootloader.
--		 */
--
--		psci-area@4000000 {
--			reg = <0x0 0x4000000 0x0 0x200000>;
--			no-map;
--		};
--	};
--
--	ap806 {
--		#address-cells = <2>;
--		#size-cells = <2>;
--		compatible = "simple-bus";
--		interrupt-parent = <&gic>;
--		ranges;
--
--		config-space@f0000000 {
--			#address-cells = <1>;
--			#size-cells = <1>;
--			compatible = "simple-bus";
--			ranges = <0x0 0x0 0xf0000000 0x1000000>;
--
--			gic: interrupt-controller@210000 {
--				compatible = "arm,gic-400";
--				#interrupt-cells = <3>;
--				#address-cells = <1>;
--				#size-cells = <1>;
--				ranges;
--				interrupt-controller;
--				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
--				reg = <0x210000 0x10000>,
--				      <0x220000 0x20000>,
--				      <0x240000 0x20000>,
--				      <0x260000 0x20000>;
--
--				gic_v2m0: v2m@280000 {
--					compatible = "arm,gic-v2m-frame";
--					msi-controller;
--					reg = <0x280000 0x1000>;
--					arm,msi-base-spi = <160>;
--					arm,msi-num-spis = <32>;
--				};
--				gic_v2m1: v2m@290000 {
--					compatible = "arm,gic-v2m-frame";
--					msi-controller;
--					reg = <0x290000 0x1000>;
--					arm,msi-base-spi = <192>;
--					arm,msi-num-spis = <32>;
--				};
--				gic_v2m2: v2m@2a0000 {
--					compatible = "arm,gic-v2m-frame";
--					msi-controller;
--					reg = <0x2a0000 0x1000>;
--					arm,msi-base-spi = <224>;
--					arm,msi-num-spis = <32>;
--				};
--				gic_v2m3: v2m@2b0000 {
--					compatible = "arm,gic-v2m-frame";
--					msi-controller;
--					reg = <0x2b0000 0x1000>;
--					arm,msi-base-spi = <256>;
--					arm,msi-num-spis = <32>;
--				};
--			};
--
--			timer {
--				compatible = "arm,armv8-timer";
--				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
--			};
--
--			pmu {
--				compatible = "arm,cortex-a72-pmu";
--				interrupt-parent = <&pic>;
--				interrupts = <17>;
--			};
--
--			odmi: odmi@300000 {
--				compatible = "marvell,odmi-controller";
--				interrupt-controller;
--				msi-controller;
--				marvell,odmi-frames = <4>;
--				reg = <0x300000 0x4000>,
--				      <0x304000 0x4000>,
--				      <0x308000 0x4000>,
--				      <0x30C000 0x4000>;
--				marvell,spi-base = <128>, <136>, <144>, <152>;
--			};
--
--			gicp: gicp@3f0040 {
--				compatible = "marvell,ap806-gicp";
--				reg = <0x3f0040 0x10>;
--				marvell,spi-ranges = <64 64>, <288 64>;
--				msi-controller;
--			};
--
--			pic: interrupt-controller@3f0100 {
--				compatible = "marvell,armada-8k-pic";
--				reg = <0x3f0100 0x10>;
--				#interrupt-cells = <1>;
--				interrupt-controller;
--				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
--			};
--
--			sei: interrupt-controller@3f0200 {
--				compatible = "marvell,ap806-sei";
--				reg = <0x3f0200 0x40>;
--				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
--				#interrupt-cells = <1>;
--				interrupt-controller;
--				msi-controller;
--			};
--
--			xor@400000 {
--				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--				reg = <0x400000 0x1000>,
--				      <0x410000 0x1000>;
--				msi-parent = <&gic_v2m0>;
--				clocks = <&ap_clk 3>;
--				dma-coherent;
--			};
--
--			xor@420000 {
--				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--				reg = <0x420000 0x1000>,
--				      <0x430000 0x1000>;
--				msi-parent = <&gic_v2m0>;
--				clocks = <&ap_clk 3>;
--				dma-coherent;
--			};
--
--			xor@440000 {
--				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--				reg = <0x440000 0x1000>,
--				      <0x450000 0x1000>;
--				msi-parent = <&gic_v2m0>;
--				clocks = <&ap_clk 3>;
--				dma-coherent;
--			};
--
--			xor@460000 {
--				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
--				reg = <0x460000 0x1000>,
--				      <0x470000 0x1000>;
--				msi-parent = <&gic_v2m0>;
--				clocks = <&ap_clk 3>;
--				dma-coherent;
--			};
--
--			spi0: spi@510600 {
--				compatible = "marvell,armada-380-spi";
--				reg = <0x510600 0x50>;
--				#address-cells = <1>;
--				#size-cells = <0>;
--				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
--				clocks = <&ap_clk 3>;
--				status = "disabled";
--			};
--
--			i2c0: i2c@511000 {
--				compatible = "marvell,mv78230-i2c";
--				reg = <0x511000 0x20>;
--				#address-cells = <1>;
--				#size-cells = <0>;
--				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
--				timeout-ms = <1000>;
--				clocks = <&ap_clk 3>;
--				status = "disabled";
--			};
--
--			uart0: serial@512000 {
--				compatible = "snps,dw-apb-uart";
--				reg = <0x512000 0x100>;
--				reg-shift = <2>;
--				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
--				reg-io-width = <1>;
--				clocks = <&ap_clk 3>;
--				status = "disabled";
--			};
--
--			uart1: serial@512100 {
--				compatible = "snps,dw-apb-uart";
--				reg = <0x512100 0x100>;
--				reg-shift = <2>;
--				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
--				reg-io-width = <1>;
--				clocks = <&ap_clk 3>;
--				status = "disabled";
--
--			};
--
--			watchdog: watchdog@610000 {
--				compatible = "arm,sbsa-gwdt";
--				reg = <0x610000 0x1000>, <0x600000 0x1000>;
--				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
--			};
--
--			ap_sdhci0: sdhci@6e0000 {
--				compatible = "marvell,armada-ap806-sdhci";
--				reg = <0x6e0000 0x300>;
--				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
--				clock-names = "core";
--				clocks = <&ap_clk 4>;
--				dma-coherent;
--				marvell,xenon-phy-slow-mode;
--				status = "disabled";
--			};
--
--			ap_syscon0: system-controller@6f4000 {
--				compatible = "syscon", "simple-mfd";
--				reg = <0x6f4000 0x2000>;
--
--				ap_clk: clock {
--					compatible = "marvell,ap806-clock";
--					#clock-cells = <1>;
--				};
--
--				ap_pinctrl: pinctrl {
--					compatible = "marvell,ap806-pinctrl";
--
--					uart0_pins: uart0-pins {
--						marvell,pins = "mpp11", "mpp19";
--						marvell,function = "uart0";
--					};
--				};
--
--				ap_gpio: gpio@1040 {
--					compatible = "marvell,armada-8k-gpio";
--					offset = <0x1040>;
--					ngpios = <20>;
--					gpio-controller;
--					#gpio-cells = <2>;
--					gpio-ranges = <&ap_pinctrl 0 0 20>;
--				};
--			};
--
--			ap_syscon1: system-controller@6f8000 {
--				compatible = "syscon", "simple-mfd";
--				reg = <0x6f8000 0x1000>;
--				#address-cells = <1>;
--				#size-cells = <1>;
--
--				cpu_clk: clock-cpu@278 {
--					compatible = "marvell,ap806-cpu-clock";
--					clocks = <&ap_clk 0>, <&ap_clk 1>;
--					#clock-cells = <1>;
--					reg = <0x278 0xa30>;
--				};
--
--				ap_thermal: thermal-sensor@80 {
--					compatible = "marvell,armada-ap806-thermal";
--					reg = <0x80 0x10>;
--					interrupt-parent = <&sei>;
--					interrupts = <18>;
--					#thermal-sensor-cells = <1>;
--				};
--			};
--		};
--	};
--
--	/*
--	 * The thermal IP features one internal sensor plus, if applicable, one
--	 * remote channel wired to one sensor per CPU.
--	 *
--	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
--	 * first one that will have a critical trip point will be chosen.
--	 */
--	thermal-zones {
--		ap_thermal_ic: ap-thermal-ic {
--			polling-delay-passive = <0>; /* Interrupt driven */
--			polling-delay = <0>; /* Interrupt driven */
--
--			thermal-sensors = <&ap_thermal 0>;
--
--			trips {
--				ap_crit: ap-crit {
--					temperature = <100000>; /* mC degrees */
--					hysteresis = <2000>; /* mC degrees */
--					type = "critical";
--				};
--			};
--
--			cooling-maps { };
--		};
--
--		ap_thermal_cpu0: ap-thermal-cpu0 {
--			polling-delay-passive = <1000>;
--			polling-delay = <1000>;
--
--			thermal-sensors = <&ap_thermal 1>;
--
--			trips {
--				cpu0_hot: cpu0-hot {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu0_emerg: cpu0-emerg {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--			};
--
--			cooling-maps {
--				map0_hot: map0-hot {
--					trip = <&cpu0_hot>;
--					cooling-device = <&cpu0 1 2>,
--						<&cpu1 1 2>;
--				};
--				map0_emerg: map0-ermerg {
--					trip = <&cpu0_emerg>;
--					cooling-device = <&cpu0 3 3>,
--						<&cpu1 3 3>;
--				};
--			};
--		};
--
--		ap_thermal_cpu1: ap-thermal-cpu1 {
--			polling-delay-passive = <1000>;
--			polling-delay = <1000>;
--
--			thermal-sensors = <&ap_thermal 2>;
--
--			trips {
--				cpu1_hot: cpu1-hot {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu1_emerg: cpu1-emerg {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--			};
--
--			cooling-maps {
--				map1_hot: map1-hot {
--					trip = <&cpu1_hot>;
--					cooling-device = <&cpu0 1 2>,
--						<&cpu1 1 2>;
--				};
--				map1_emerg: map1-emerg {
--					trip = <&cpu1_emerg>;
--					cooling-device = <&cpu0 3 3>,
--						<&cpu1 3 3>;
--				};
--			};
--		};
--
--		ap_thermal_cpu2: ap-thermal-cpu2 {
--			polling-delay-passive = <1000>;
--			polling-delay = <1000>;
--
--			thermal-sensors = <&ap_thermal 3>;
--
--			trips {
--				cpu2_hot: cpu2-hot {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu2_emerg: cpu2-emerg {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--			};
--
--			cooling-maps {
--				map2_hot: map2-hot {
--					trip = <&cpu2_hot>;
--					cooling-device = <&cpu2 1 2>,
--						<&cpu3 1 2>;
--				};
--				map2_emerg: map2-emerg {
--					trip = <&cpu2_emerg>;
--					cooling-device = <&cpu2 3 3>,
--						<&cpu3 3 3>;
--				};
--			};
--		};
--
--		ap_thermal_cpu3: ap-thermal-cpu3 {
--			polling-delay-passive = <1000>;
--			polling-delay = <1000>;
--
--			thermal-sensors = <&ap_thermal 4>;
--
--			trips {
--				cpu3_hot: cpu3-hot {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu3_emerg: cpu3-emerg {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--			};
--
--			cooling-maps {
--				map3_hot: map3-bhot {
--					trip = <&cpu3_hot>;
--					cooling-device = <&cpu2 1 2>,
--						<&cpu3 1 2>;
--				};
--				map3_emerg: map3-emerg {
--					trip = <&cpu3_emerg>;
--					cooling-device = <&cpu2 3 3>,
--						<&cpu3 3 3>;
--				};
--			};
--		};
--	};
- };
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-@@ -0,0 +1,456 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada AP80x.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+/dts-v1/;
-+
-+/ {
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	aliases {
-+		serial0 = &uart0;
-+		serial1 = &uart1;
-+		gpio0 = &ap_gpio;
-+		spi0 = &spi0;
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		/*
-+		 * This area matches the mapping done with a
-+		 * mainline U-Boot, and should be updated by the
-+		 * bootloader.
-+		 */
-+
-+		psci-area@4000000 {
-+			reg = <0x0 0x4000000 0x0 0x200000>;
-+			no-map;
-+		};
-+	};
-+
-+	AP_NAME {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		compatible = "simple-bus";
-+		interrupt-parent = <&gic>;
-+		ranges;
-+
-+		config-space@f0000000 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			compatible = "simple-bus";
-+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
-+
-+			gic: interrupt-controller@210000 {
-+				compatible = "arm,gic-400";
-+				#interrupt-cells = <3>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				ranges;
-+				interrupt-controller;
-+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+				reg = <0x210000 0x10000>,
-+				      <0x220000 0x20000>,
-+				      <0x240000 0x20000>,
-+				      <0x260000 0x20000>;
-+
-+				gic_v2m0: v2m@280000 {
-+					compatible = "arm,gic-v2m-frame";
-+					msi-controller;
-+					reg = <0x280000 0x1000>;
-+					arm,msi-base-spi = <160>;
-+					arm,msi-num-spis = <32>;
-+				};
-+				gic_v2m1: v2m@290000 {
-+					compatible = "arm,gic-v2m-frame";
-+					msi-controller;
-+					reg = <0x290000 0x1000>;
-+					arm,msi-base-spi = <192>;
-+					arm,msi-num-spis = <32>;
-+				};
-+				gic_v2m2: v2m@2a0000 {
-+					compatible = "arm,gic-v2m-frame";
-+					msi-controller;
-+					reg = <0x2a0000 0x1000>;
-+					arm,msi-base-spi = <224>;
-+					arm,msi-num-spis = <32>;
-+				};
-+				gic_v2m3: v2m@2b0000 {
-+					compatible = "arm,gic-v2m-frame";
-+					msi-controller;
-+					reg = <0x2b0000 0x1000>;
-+					arm,msi-base-spi = <256>;
-+					arm,msi-num-spis = <32>;
-+				};
-+			};
-+
-+			timer {
-+				compatible = "arm,armv8-timer";
-+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+			};
-+
-+			pmu {
-+				compatible = "arm,cortex-a72-pmu";
-+				interrupt-parent = <&pic>;
-+				interrupts = <17>;
-+			};
-+
-+			odmi: odmi@300000 {
-+				compatible = "marvell,odmi-controller";
-+				interrupt-controller;
-+				msi-controller;
-+				marvell,odmi-frames = <4>;
-+				reg = <0x300000 0x4000>,
-+				      <0x304000 0x4000>,
-+				      <0x308000 0x4000>,
-+				      <0x30C000 0x4000>;
-+				marvell,spi-base = <128>, <136>, <144>, <152>;
-+			};
-+
-+			gicp: gicp@3f0040 {
-+				compatible = "marvell,ap806-gicp";
-+				reg = <0x3f0040 0x10>;
-+				marvell,spi-ranges = <64 64>, <288 64>;
-+				msi-controller;
-+			};
-+
-+			pic: interrupt-controller@3f0100 {
-+				compatible = "marvell,armada-8k-pic";
-+				reg = <0x3f0100 0x10>;
-+				#interrupt-cells = <1>;
-+				interrupt-controller;
-+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-+			};
-+
-+			sei: interrupt-controller@3f0200 {
-+				compatible = "marvell,ap806-sei";
-+				reg = <0x3f0200 0x40>;
-+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-+				#interrupt-cells = <1>;
-+				interrupt-controller;
-+				msi-controller;
-+			};
-+
-+			xor@400000 {
-+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+				reg = <0x400000 0x1000>,
-+				      <0x410000 0x1000>;
-+				msi-parent = <&gic_v2m0>;
-+				clocks = <&ap_clk 3>;
-+				dma-coherent;
-+			};
-+
-+			xor@420000 {
-+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+				reg = <0x420000 0x1000>,
-+				      <0x430000 0x1000>;
-+				msi-parent = <&gic_v2m0>;
-+				clocks = <&ap_clk 3>;
-+				dma-coherent;
-+			};
-+
-+			xor@440000 {
-+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+				reg = <0x440000 0x1000>,
-+				      <0x450000 0x1000>;
-+				msi-parent = <&gic_v2m0>;
-+				clocks = <&ap_clk 3>;
-+				dma-coherent;
-+			};
-+
-+			xor@460000 {
-+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+				reg = <0x460000 0x1000>,
-+				      <0x470000 0x1000>;
-+				msi-parent = <&gic_v2m0>;
-+				clocks = <&ap_clk 3>;
-+				dma-coherent;
-+			};
-+
-+			spi0: spi@510600 {
-+				compatible = "marvell,armada-380-spi";
-+				reg = <0x510600 0x50>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&ap_clk 3>;
-+				status = "disabled";
-+			};
-+
-+			i2c0: i2c@511000 {
-+				compatible = "marvell,mv78230-i2c";
-+				reg = <0x511000 0x20>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-+				timeout-ms = <1000>;
-+				clocks = <&ap_clk 3>;
-+				status = "disabled";
-+			};
-+
-+			uart0: serial@512000 {
-+				compatible = "snps,dw-apb-uart";
-+				reg = <0x512000 0x100>;
-+				reg-shift = <2>;
-+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+				reg-io-width = <1>;
-+				clocks = <&ap_clk 3>;
-+				status = "disabled";
-+			};
-+
-+			uart1: serial@512100 {
-+				compatible = "snps,dw-apb-uart";
-+				reg = <0x512100 0x100>;
-+				reg-shift = <2>;
-+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+				reg-io-width = <1>;
-+				clocks = <&ap_clk 3>;
-+				status = "disabled";
-+
-+			};
-+
-+			watchdog: watchdog@610000 {
-+				compatible = "arm,sbsa-gwdt";
-+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
-+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+			};
-+
-+			ap_sdhci0: sdhci@6e0000 {
-+				compatible = "marvell,armada-ap806-sdhci";
-+				reg = <0x6e0000 0x300>;
-+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-+				clock-names = "core";
-+				clocks = <&ap_clk 4>;
-+				dma-coherent;
-+				marvell,xenon-phy-slow-mode;
-+				status = "disabled";
-+			};
-+
-+			ap_syscon0: system-controller@6f4000 {
-+				compatible = "syscon", "simple-mfd";
-+				reg = <0x6f4000 0x2000>;
-+
-+				ap_clk: clock {
-+					compatible = "marvell,ap806-clock";
-+					#clock-cells = <1>;
-+				};
-+
-+				ap_pinctrl: pinctrl {
-+					compatible = "marvell,ap806-pinctrl";
-+
-+					uart0_pins: uart0-pins {
-+						marvell,pins = "mpp11", "mpp19";
-+						marvell,function = "uart0";
-+					};
-+				};
-+
-+				ap_gpio: gpio@1040 {
-+					compatible = "marvell,armada-8k-gpio";
-+					offset = <0x1040>;
-+					ngpios = <20>;
-+					gpio-controller;
-+					#gpio-cells = <2>;
-+					gpio-ranges = <&ap_pinctrl 0 0 20>;
-+				};
-+			};
-+
-+			ap_syscon1: system-controller@6f8000 {
-+				compatible = "syscon", "simple-mfd";
-+				reg = <0x6f8000 0x1000>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+
-+				cpu_clk: clock-cpu@278 {
-+					compatible = "marvell,ap806-cpu-clock";
-+					clocks = <&ap_clk 0>, <&ap_clk 1>;
-+					#clock-cells = <1>;
-+					reg = <0x278 0xa30>;
-+				};
-+
-+				ap_thermal: thermal-sensor@80 {
-+					compatible = "marvell,armada-ap806-thermal";
-+					reg = <0x80 0x10>;
-+					interrupt-parent = <&sei>;
-+					interrupts = <18>;
-+					#thermal-sensor-cells = <1>;
-+				};
-+			};
-+		};
-+	};
-+
-+	/*
-+	 * The thermal IP features one internal sensor plus, if applicable, one
-+	 * remote channel wired to one sensor per CPU.
-+	 *
-+	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
-+	 * first one that will have a critical trip point will be chosen.
-+	 */
-+	thermal-zones {
-+		ap_thermal_ic: ap-thermal-ic {
-+			polling-delay-passive = <0>; /* Interrupt driven */
-+			polling-delay = <0>; /* Interrupt driven */
-+
-+			thermal-sensors = <&ap_thermal 0>;
-+
-+			trips {
-+				ap_crit: ap-crit {
-+					temperature = <100000>; /* mC degrees */
-+					hysteresis = <2000>; /* mC degrees */
-+					type = "critical";
-+				};
-+			};
-+
-+			cooling-maps { };
-+		};
-+
-+		ap_thermal_cpu0: ap-thermal-cpu0 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&ap_thermal 1>;
-+
-+			trips {
-+				cpu0_hot: cpu0-hot {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu0_emerg: cpu0-emerg {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+			};
-+
-+			cooling-maps {
-+				map0_hot: map0-hot {
-+					trip = <&cpu0_hot>;
-+					cooling-device = <&cpu0 1 2>,
-+						<&cpu1 1 2>;
-+				};
-+				map0_emerg: map0-ermerg {
-+					trip = <&cpu0_emerg>;
-+					cooling-device = <&cpu0 3 3>,
-+						<&cpu1 3 3>;
-+				};
-+			};
-+		};
-+
-+		ap_thermal_cpu1: ap-thermal-cpu1 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&ap_thermal 2>;
-+
-+			trips {
-+				cpu1_hot: cpu1-hot {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu1_emerg: cpu1-emerg {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+			};
-+
-+			cooling-maps {
-+				map1_hot: map1-hot {
-+					trip = <&cpu1_hot>;
-+					cooling-device = <&cpu0 1 2>,
-+						<&cpu1 1 2>;
-+				};
-+				map1_emerg: map1-emerg {
-+					trip = <&cpu1_emerg>;
-+					cooling-device = <&cpu0 3 3>,
-+						<&cpu1 3 3>;
-+				};
-+			};
-+		};
-+
-+		ap_thermal_cpu2: ap-thermal-cpu2 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&ap_thermal 3>;
-+
-+			trips {
-+				cpu2_hot: cpu2-hot {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu2_emerg: cpu2-emerg {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+			};
-+
-+			cooling-maps {
-+				map2_hot: map2-hot {
-+					trip = <&cpu2_hot>;
-+					cooling-device = <&cpu2 1 2>,
-+						<&cpu3 1 2>;
-+				};
-+				map2_emerg: map2-emerg {
-+					trip = <&cpu2_emerg>;
-+					cooling-device = <&cpu2 3 3>,
-+						<&cpu3 3 3>;
-+				};
-+			};
-+		};
-+
-+		ap_thermal_cpu3: ap-thermal-cpu3 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&ap_thermal 4>;
-+
-+			trips {
-+				cpu3_hot: cpu3-hot {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu3_emerg: cpu3-emerg {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+			};
-+
-+			cooling-maps {
-+				map3_hot: map3-bhot {
-+					trip = <&cpu3_hot>;
-+					cooling-device = <&cpu2 1 2>,
-+						<&cpu3 1 2>;
-+				};
-+				map3_emerg: map3-emerg {
-+					trip = <&cpu3_emerg>;
-+					cooling-device = <&cpu2 3 3>,
-+						<&cpu3 3 3>;
-+				};
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch b/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
deleted file mode 100644
index 8d9b775f7b..0000000000
--- a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
+++ /dev/null
@@ -1,175 +0,0 @@ 
-From b0a43db9087a21d96e1a0b716b8d9963064b2d58 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 19 Oct 2019 10:13:27 +0200
-Subject: [PATCH 7/7] net: mvneta: add XDP_TX support
-
-Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
-pointer
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 128 ++++++++++++++++++++++++--
- 1 file changed, 121 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -1813,16 +1813,19 @@ static void mvneta_txq_bufs_free(struct
- 
- 		mvneta_txq_inc_get(txq);
- 
--		if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr))
-+		if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr) &&
-+		    buf->type != MVNETA_TYPE_XDP_TX)
- 			dma_unmap_single(pp->dev->dev.parent,
- 					 tx_desc->buf_phys_addr,
- 					 tx_desc->data_size, DMA_TO_DEVICE);
--		if (!buf->skb)
--			continue;
--
--		bytes_compl += buf->skb->len;
--		pkts_compl++;
--		dev_kfree_skb_any(buf->skb);
-+		if (buf->type == MVNETA_TYPE_SKB && buf->skb) {
-+			bytes_compl += buf->skb->len;
-+			pkts_compl++;
-+			dev_kfree_skb_any(buf->skb);
-+		} else if (buf->type == MVNETA_TYPE_XDP_TX ||
-+			   buf->type == MVNETA_TYPE_XDP_NDO) {
-+			xdp_return_frame(buf->xdpf);
-+		}
- 	}
- 
- 	netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
-@@ -1987,6 +1990,111 @@ int mvneta_rx_refill_queue(struct mvneta
- }
- 
- static int
-+mvneta_xdp_submit_frame(struct mvneta_port *pp, struct mvneta_tx_queue *txq,
-+			struct xdp_frame *xdpf, bool dma_map)
-+{
-+	struct mvneta_tx_desc *tx_desc;
-+	struct mvneta_tx_buf *buf;
-+	dma_addr_t dma_addr;
-+
-+	if (txq->count >= txq->tx_stop_threshold)
-+		return MVNETA_XDP_DROPPED;
-+
-+	tx_desc = mvneta_txq_next_desc_get(txq);
-+
-+	buf = &txq->buf[txq->txq_put_index];
-+	if (dma_map) {
-+		/* ndo_xdp_xmit */
-+		dma_addr = dma_map_single(pp->dev->dev.parent, xdpf->data,
-+					  xdpf->len, DMA_TO_DEVICE);
-+		if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) {
-+			mvneta_txq_desc_put(txq);
-+			return MVNETA_XDP_DROPPED;
-+		}
-+		buf->type = MVNETA_TYPE_XDP_NDO;
-+	} else {
-+		struct page *page = virt_to_page(xdpf->data);
-+
-+		dma_addr = page_pool_get_dma_addr(page) +
-+			   sizeof(*xdpf) + xdpf->headroom;
-+		dma_sync_single_for_device(pp->dev->dev.parent, dma_addr,
-+					   xdpf->len, DMA_BIDIRECTIONAL);
-+		buf->type = MVNETA_TYPE_XDP_TX;
-+	}
-+	buf->xdpf = xdpf;
-+
-+	tx_desc->command = MVNETA_TXD_FLZ_DESC;
-+	tx_desc->buf_phys_addr = dma_addr;
-+	tx_desc->data_size = xdpf->len;
-+
-+	mvneta_update_stats(pp, 1, xdpf->len, true);
-+	mvneta_txq_inc_put(txq);
-+	txq->pending++;
-+	txq->count++;
-+
-+	return MVNETA_XDP_TX;
-+}
-+
-+static int
-+mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
-+{
-+	struct mvneta_tx_queue *txq;
-+	struct netdev_queue *nq;
-+	struct xdp_frame *xdpf;
-+	int cpu;
-+	u32 ret;
-+
-+	xdpf = convert_to_xdp_frame(xdp);
-+	if (unlikely(!xdpf))
-+		return MVNETA_XDP_DROPPED;
-+
-+	cpu = smp_processor_id();
-+	txq = &pp->txqs[cpu % txq_number];
-+	nq = netdev_get_tx_queue(pp->dev, txq->id);
-+
-+	__netif_tx_lock(nq, cpu);
-+	ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false);
-+	if (ret == MVNETA_XDP_TX)
-+		mvneta_txq_pend_desc_add(pp, txq, 0);
-+	__netif_tx_unlock(nq);
-+
-+	return ret;
-+}
-+
-+static int
-+mvneta_xdp_xmit(struct net_device *dev, int num_frame,
-+		struct xdp_frame **frames, u32 flags)
-+{
-+	struct mvneta_port *pp = netdev_priv(dev);
-+	int cpu = smp_processor_id();
-+	struct mvneta_tx_queue *txq;
-+	struct netdev_queue *nq;
-+	int i, drops = 0;
-+	u32 ret;
-+
-+	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
-+		return -EINVAL;
-+
-+	txq = &pp->txqs[cpu % txq_number];
-+	nq = netdev_get_tx_queue(pp->dev, txq->id);
-+
-+	__netif_tx_lock(nq, cpu);
-+	for (i = 0; i < num_frame; i++) {
-+		ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true);
-+		if (ret != MVNETA_XDP_TX) {
-+			xdp_return_frame_rx_napi(frames[i]);
-+			drops++;
-+		}
-+	}
-+
-+	if (unlikely(flags & XDP_XMIT_FLUSH))
-+		mvneta_txq_pend_desc_add(pp, txq, 0);
-+	__netif_tx_unlock(nq);
-+
-+	return num_frame - drops;
-+}
-+
-+static int
- mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
- 	       struct bpf_prog *prog, struct xdp_buff *xdp)
- {
-@@ -2008,6 +2116,11 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- 		}
- 		break;
- 	}
-+	case XDP_TX:
-+		ret = mvneta_xdp_xmit_back(pp, xdp);
-+		if (ret != MVNETA_XDP_TX)
-+			xdp_return_buff(xdp);
-+		break;
- 	default:
- 		bpf_warn_invalid_xdp_action(act);
- 		/* fall through */
-@@ -4581,6 +4694,7 @@ static const struct net_device_ops mvnet
- 	.ndo_get_stats64     = mvneta_get_stats64,
- 	.ndo_do_ioctl        = mvneta_ioctl,
- 	.ndo_bpf             = mvneta_xdp,
-+	.ndo_xdp_xmit        = mvneta_xdp_xmit,
- };
- 
- static const struct ethtool_ops mvneta_eth_tool_ops = {
diff --git a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch b/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
deleted file mode 100644
index 38965dd9e5..0000000000
--- a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
+++ /dev/null
@@ -1,65 +0,0 @@ 
-From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:23 +0200
-Subject: [PATCH] arm64: dts: marvell: Move clocks to AP806 specific file
-
-Regular clocks and CPU clocks are specific to AP806, move them out of
-the generic AP80x file so that AP807 can use its own clocks.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++
- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------
- 2 files changed, 16 insertions(+), 12 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -12,3 +12,19 @@
- 	model = "Marvell Armada AP806";
- 	compatible = "marvell,armada-ap806";
- };
-+
-+&ap_syscon0 {
-+	ap_clk: clock {
-+		compatible = "marvell,ap806-clock";
-+		#clock-cells = <1>;
-+	};
-+};
-+
-+&ap_syscon1 {
-+	cpu_clk: clock-cpu@278 {
-+		compatible = "marvell,ap806-cpu-clock";
-+		clocks = <&ap_clk 0>, <&ap_clk 1>;
-+		#clock-cells = <1>;
-+		reg = <0x278 0xa30>;
-+	};
-+};
---- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-@@ -248,11 +248,6 @@
- 				compatible = "syscon", "simple-mfd";
- 				reg = <0x6f4000 0x2000>;
- 
--				ap_clk: clock {
--					compatible = "marvell,ap806-clock";
--					#clock-cells = <1>;
--				};
--
- 				ap_pinctrl: pinctrl {
- 					compatible = "marvell,ap806-pinctrl";
- 
-@@ -278,13 +273,6 @@
- 				#address-cells = <1>;
- 				#size-cells = <1>;
- 
--				cpu_clk: clock-cpu@278 {
--					compatible = "marvell,ap806-cpu-clock";
--					clocks = <&ap_clk 0>, <&ap_clk 1>;
--					#clock-cells = <1>;
--					reg = <0x278 0xa30>;
--				};
--
- 				ap_thermal: thermal-sensor@80 {
- 					compatible = "marvell,armada-ap806-thermal";
- 					reg = <0x80 0x10>;
diff --git a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch b/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
deleted file mode 100644
index adfa51e4e8..0000000000
--- a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
+++ /dev/null
@@ -1,41 +0,0 @@ 
-From b37fa92e20ef28aada852cbf03b368d29a20478c Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 14 Nov 2019 01:25:55 +0200
-Subject: [PATCH] net: mvneta: fix build skb for bm capable devices
-
-Fix build_skb for bm capable devices when they fall-back using swbm path
-(e.g. when bm properties are configured in device tree but
-CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is
-overwritten so we need to use it building skb instead of
-MVNETA_SKB_HEADROOM directly
-
-Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine")
-Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reported-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2167,7 +2167,7 @@ mvneta_swbm_rx_frame(struct mvneta_port
- 	prefetch(data);
- 
- 	xdp->data_hard_start = data;
--	xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
-+	xdp->data = data + pp->rx_offset_correction + MVNETA_MH_SIZE;
- 	xdp->data_end = xdp->data + data_len;
- 	xdp_set_data_meta_invalid(xdp);
- 
-@@ -2232,7 +2232,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
- 		/* refill descriptor with new buffer later */
- 		skb_add_rx_frag(rxq->skb,
- 				skb_shinfo(rxq->skb)->nr_frags,
--				page, MVNETA_SKB_HEADROOM, data_len,
-+				page, pp->rx_offset_correction, data_len,
- 				PAGE_SIZE);
- 	}
- 	page_pool_release_page(rxq->page_pool, page);
diff --git a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch b/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
deleted file mode 100644
index 2922d49f44..0000000000
--- a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
+++ /dev/null
@@ -1,31 +0,0 @@ 
-From fe3ec631a77ded87817f449691710a436a80caa7 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 16 Nov 2019 11:07:01 +0000
-Subject: [PATCH] arm64: dts: uDPU: remove i2c-fast-mode
-
-The I2C bus violates the timing specifications when run in fast mode
-on the uDPU, so switch to 100kHz mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -119,12 +119,14 @@
- 	status = "okay";
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-+	/delete-property/mrvl,i2c-fast-mode;
- };
- 
- &i2c1 {
- 	status = "okay";
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins>;
-+	/delete-property/mrvl,i2c-fast-mode;
- 
- 	lm75@48 {
- 		status = "okay";
diff --git a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch b/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
deleted file mode 100644
index 1884def2c6..0000000000
--- a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
+++ /dev/null
@@ -1,34 +0,0 @@ 
-From cd592187f9de3c6305d6c1c66f7fac084cb5b846 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 19 Nov 2019 22:53:04 +0000
-Subject: [PATCH] arm64: dts: uDPU: SFP cages support 3W modules
-
-The SFP cages are designed to support up to 3W modules, such as G.hn,
-G.fast and MoCA modules. Although there is no way for such modules to
-declare to software that they consume 3W, we document in DT that this
-is the designed power level for these cages.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -69,6 +69,7 @@
- 		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- 		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- 		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
-+		maximum-power-milliwatt = <3000>;
- 	};
- 
- 	sfp_eth1: sfp-eth1 {
-@@ -78,6 +79,7 @@
- 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-+		maximum-power-milliwatt = <3000>;
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch b/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
deleted file mode 100644
index 6e79aeb358..0000000000
--- a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
+++ /dev/null
@@ -1,39 +0,0 @@ 
-From f383b2950070ce4f34e74db94f70bb565b746e97 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 20 Nov 2019 16:54:17 +0200
-Subject: [PATCH] net: mvneta: rely on page_pool_recycle_direct in
- mvneta_run_xdp
-
-Rely on page_pool_recycle_direct and not on xdp_return_buff in
-mvneta_run_xdp. This is a preliminary patch to limit the dma sync len
-to the one strictly necessary
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2110,7 +2110,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- 		err = xdp_do_redirect(pp->dev, xdp, prog);
- 		if (err) {
- 			ret = MVNETA_XDP_DROPPED;
--			xdp_return_buff(xdp);
-+			page_pool_recycle_direct(rxq->page_pool,
-+						 virt_to_head_page(xdp->data));
- 		} else {
- 			ret = MVNETA_XDP_REDIR;
- 		}
-@@ -2119,7 +2120,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- 	case XDP_TX:
- 		ret = mvneta_xdp_xmit_back(pp, xdp);
- 		if (ret != MVNETA_XDP_TX)
--			xdp_return_buff(xdp);
-+			page_pool_recycle_direct(rxq->page_pool,
-+						 virt_to_head_page(xdp->data));
- 		break;
- 	default:
- 		bpf_warn_invalid_xdp_action(act);
diff --git a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch b/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
deleted file mode 100644
index 6558c6a6e2..0000000000
--- a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
+++ /dev/null
@@ -1,53 +0,0 @@ 
-From 79572c98c554dcdb080bca547c871a51716dcdf8 Mon Sep 17 00:00:00 2001
-From: Sven Auhagen <sven.auhagen@voleatech.de>
-Date: Sat, 25 Jan 2020 08:07:03 +0000
-Subject: [PATCH] mvneta driver disallow XDP program on hardware buffer
- management
-
-Recently XDP Support was added to the mvneta driver
-for software buffer management only.
-It is still possible to attach an XDP program if
-hardware buffer management is used.
-It is not doing anything at that point.
-
-The patch disallows attaching XDP programs to mvneta
-if hardware buffer management is used.
-
-I am sorry about that. It is my first submission and I am having
-some troubles with the format of my emails.
-
-v4 -> v5:
-- Remove extra tabs
-
-v3 -> v4:
-- Please ignore v3 I accidentally submitted
-  my other patch with git-send-mail and v4 is correct
-
-v2 -> v3:
-- My mailserver corrupted the patch
-  resubmission with git-send-email
-
-v1 -> v2:
-- Fixing the patches indentation
-
-Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4270,6 +4270,12 @@ static int mvneta_xdp_setup(struct net_d
- 		return -EOPNOTSUPP;
- 	}
- 
-+	if (pp->bm_priv) {
-+		NL_SET_ERR_MSG_MOD(extack,
-+				   "Hardware Buffer Management not supported on XDP");
-+		return -EOPNOTSUPP;
-+	}
-+
- 	need_update = !!pp->xdp_prog != !!prog;
- 	if (running && need_update)
- 		mvneta_stop(dev);
diff --git a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch b/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
deleted file mode 100644
index 1299f3f69b..0000000000
--- a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
+++ /dev/null
@@ -1,67 +0,0 @@ 
-From 44efc78d0e464ce70b45b165c005f8bedc17952e Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 29 Jan 2020 12:50:53 +0100
-Subject: [PATCH] net: mvneta: fix XDP support if sw bm is used as fallback
-
-In order to fix XDP support if sw buffer management is used as fallback
-for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between
-XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header
-to 4-byte boundary.
-Fix rx_offset_correction initialization if mvneta_bm_port_init fails in
-mvneta_resume routine
-
-Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
-Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -326,8 +326,7 @@
- 	      ETH_HLEN + ETH_FCS_LEN,			     \
- 	      cache_line_size())
- 
--#define MVNETA_SKB_HEADROOM	(max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
--				 NET_IP_ALIGN)
-+#define MVNETA_SKB_HEADROOM	max(XDP_PACKET_HEADROOM, NET_SKB_PAD)
- #define MVNETA_SKB_PAD	(SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
- 			 MVNETA_SKB_HEADROOM))
- #define MVNETA_SKB_SIZE(len)	(SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
-@@ -1174,6 +1173,7 @@ bm_mtu_err:
- 	mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id);
- 
- 	pp->bm_priv = NULL;
-+	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- 	mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1);
- 	netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n");
- }
-@@ -4989,7 +4989,6 @@ static int mvneta_probe(struct platform_
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 
- 	pp->id = global_port_id++;
--	pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- 
- 	/* Obtain access to BM resources if enabled and already initialized */
- 	bm_node = of_parse_phandle(dn, "buffer-manager", 0);
-@@ -5014,6 +5013,10 @@ static int mvneta_probe(struct platform_
- 	}
- 	of_node_put(bm_node);
- 
-+	/* sw buffer management */
-+	if (!pp->bm_priv)
-+		pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
-+
- 	err = mvneta_init(&pdev->dev, pp);
- 	if (err < 0)
- 		goto err_netdev;
-@@ -5171,6 +5174,7 @@ static int mvneta_resume(struct device *
- 		err = mvneta_bm_port_init(pdev, pp);
- 		if (err < 0) {
- 			dev_info(&pdev->dev, "use SW buffer management\n");
-+			pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- 			pp->bm_priv = NULL;
- 		}
- 	}
diff --git a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch b/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
deleted file mode 100644
index 3ff0dcb166..0000000000
--- a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
+++ /dev/null
@@ -1,60 +0,0 @@ 
-From 6964494582f56a3882c2c53b0edbfe99eb32b2e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 30 Apr 2020 10:06:14 +0200
-Subject: [PATCH] PCI: aardvark: Train link immediately after enabling training
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
-training and starting link training causes detection issues with some
-buggy cards (such as Compex WLE900VX).
-
-Move the code which enables link training immediately before the one
-which starts link traning.
-
-This fixes detection issues of Compex WLE900VX card on Turris MOX after
-cold boot.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
-Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -311,11 +311,6 @@ static void advk_pcie_setup_hw(struct ad
- 	reg |= LANE_COUNT_1;
- 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
- 
--	/* Enable link training */
--	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
--	reg |= LINK_TRAINING_EN;
--	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
- 	/* Enable MSI */
- 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
- 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
-@@ -357,7 +352,15 @@ static void advk_pcie_setup_hw(struct ad
- 	 */
- 	msleep(PCI_PM_D3COLD_WAIT);
- 
--	/* Start link training */
-+	/* Enable link training */
-+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+	reg |= LINK_TRAINING_EN;
-+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+	/*
-+	 * Start link training immediately after enabling it.
-+	 * This solves problems for some buggy cards.
-+	 */
- 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- 	reg |= PCIE_CORE_LINK_TRAINING;
- 	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
diff --git a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch b/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
deleted file mode 100644
index e3a38740c3..0000000000
--- a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
+++ /dev/null
@@ -1,208 +0,0 @@ 
-From 43fc679ced18006b12d918d7a8a4af392b7fbfe7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Thu, 30 Apr 2020 10:06:17 +0200
-Subject: [PATCH] PCI: aardvark: Improve link training
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently the aardvark driver trains link in PCIe gen2 mode. This may
-cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
-even not detected. Moreover when ASPM code tries to retrain link second
-time, these cards may stop responding and link goes down. If gen1 is
-used this does not happen.
-
-Unconditionally forcing gen1 is not a good solution since it may have
-performance impact on gen2 cards.
-
-To overcome this, read 'max-link-speed' property (as defined in PCI
-device tree bindings) and use this as max gen mode. Then iteratively try
-link training at this mode or lower until successful. After successful
-link training choose final controller gen based on Negotiated Link Speed
-from Link Status register, which should match card speed.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++------
- 1 file changed, 89 insertions(+), 25 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -39,6 +39,7 @@
- #define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
- #define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
- #define     PCIE_CORE_LINK_TRAINING				BIT(5)
-+#define     PCIE_CORE_LINK_SPEED_SHIFT				16
- #define     PCIE_CORE_LINK_WIDTH_SHIFT				20
- #define PCIE_CORE_ERR_CAPCTL_REG				0x118
- #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
-@@ -202,6 +203,7 @@ struct advk_pcie {
- 	struct mutex msi_used_lock;
- 	u16 msi_msg;
- 	int root_bus_nr;
-+	int link_gen;
- 	struct pci_bridge_emul bridge;
- };
- 
-@@ -226,20 +228,16 @@ static int advk_pcie_link_up(struct advk
- 
- static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
- {
--	struct device *dev = &pcie->pdev->dev;
- 	int retries;
- 
- 	/* check if the link is up or not */
- 	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
--		if (advk_pcie_link_up(pcie)) {
--			dev_info(dev, "link up\n");
-+		if (advk_pcie_link_up(pcie))
- 			return 0;
--		}
- 
- 		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
- 	}
- 
--	dev_err(dev, "link never came up\n");
- 	return -ETIMEDOUT;
- }
- 
-@@ -254,6 +252,85 @@ static void advk_pcie_wait_for_retrain(s
- 	}
- }
- 
-+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
-+{
-+	int ret, neg_gen;
-+	u32 reg;
-+
-+	/* Setup link speed */
-+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+	reg &= ~PCIE_GEN_SEL_MSK;
-+	if (gen == 3)
-+		reg |= SPEED_GEN_3;
-+	else if (gen == 2)
-+		reg |= SPEED_GEN_2;
-+	else
-+		reg |= SPEED_GEN_1;
-+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+	/*
-+	 * Enable link training. This is not needed in every call to this
-+	 * function, just once suffices, but it does not break anything either.
-+	 */
-+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+	reg |= LINK_TRAINING_EN;
-+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+	/*
-+	 * Start link training immediately after enabling it.
-+	 * This solves problems for some buggy cards.
-+	 */
-+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-+	reg |= PCIE_CORE_LINK_TRAINING;
-+	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-+
-+	ret = advk_pcie_wait_for_link(pcie);
-+	if (ret)
-+		return ret;
-+
-+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-+	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
-+
-+	return neg_gen;
-+}
-+
-+static void advk_pcie_train_link(struct advk_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	int neg_gen = -1, gen;
-+
-+	/*
-+	 * Try link training at link gen specified by device tree property
-+	 * 'max-link-speed'. If this fails, iteratively train at lower gen.
-+	 */
-+	for (gen = pcie->link_gen; gen > 0; --gen) {
-+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
-+		if (neg_gen > 0)
-+			break;
-+	}
-+
-+	if (neg_gen < 0)
-+		goto err;
-+
-+	/*
-+	 * After successful training if negotiated gen is lower than requested,
-+	 * train again on negotiated gen. This solves some stability issues for
-+	 * some buggy gen1 cards.
-+	 */
-+	if (neg_gen < gen) {
-+		gen = neg_gen;
-+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
-+	}
-+
-+	if (neg_gen == gen) {
-+		dev_info(dev, "link up at gen %i\n", gen);
-+		return;
-+	}
-+
-+err:
-+	dev_err(dev, "link never came up\n");
-+}
-+
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
- 	u32 reg;
-@@ -299,12 +376,6 @@ static void advk_pcie_setup_hw(struct ad
- 		PCIE_CORE_CTRL2_TD_ENABLE;
- 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- 
--	/* Set GEN2 */
--	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
--	reg &= ~PCIE_GEN_SEL_MSK;
--	reg |= SPEED_GEN_2;
--	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
- 	/* Set lane X1 */
- 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- 	reg &= ~LANE_CNT_MSK;
-@@ -352,20 +423,7 @@ static void advk_pcie_setup_hw(struct ad
- 	 */
- 	msleep(PCI_PM_D3COLD_WAIT);
- 
--	/* Enable link training */
--	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
--	reg |= LINK_TRAINING_EN;
--	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
--	/*
--	 * Start link training immediately after enabling it.
--	 * This solves problems for some buggy cards.
--	 */
--	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
--	reg |= PCIE_CORE_LINK_TRAINING;
--	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
--
--	advk_pcie_wait_for_link(pcie);
-+	advk_pcie_train_link(pcie);
- 
- 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
- 	reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
-@@ -1077,6 +1135,12 @@ static int advk_pcie_probe(struct platfo
- 		return ret;
- 	}
- 
-+	ret = of_pci_get_max_link_speed(dev->of_node);
-+	if (ret <= 0 || ret > 3)
-+		pcie->link_gen = 3;
-+	else
-+		pcie->link_gen = ret;
-+
- 	advk_pcie_setup_hw(pcie);
- 
- 	ret = advk_sw_pci_bridge_init(pcie);
diff --git a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch b/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
deleted file mode 100644
index fde01fa987..0000000000
--- a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
+++ /dev/null
@@ -1,123 +0,0 @@ 
-From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 30 Apr 2020 10:06:18 +0200
-Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for issuing PERST via GPIO specified in 'reset-gpios'
-property (as described in PCI device tree bindings).
-
-Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
-after reboot when PERST is not issued during driver initialization.
-
-If bootloader already enabled link training then issuing PERST has no
-effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
-not detected. We therefore clear the LINK_TRAINING_EN register before.
-
-It was observed that Compex WLE900VX card needs to be in PERST reset
-for at least 10ms if bootloader enabled link training.
-
-Tested on Turris MOX.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 43 ++++++++++++++++++++++++++-
- 1 file changed, 42 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -9,6 +9,7 @@
-  */
- 
- #include <linux/delay.h>
-+#include <linux/gpio.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/irqdomain.h>
-@@ -17,6 +18,7 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of_address.h>
-+#include <linux/of_gpio.h>
- #include <linux/of_pci.h>
- 
- #include "../pci.h"
-@@ -205,6 +207,7 @@ struct advk_pcie {
- 	int root_bus_nr;
- 	int link_gen;
- 	struct pci_bridge_emul bridge;
-+	struct gpio_desc *reset_gpio;
- };
- 
- static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
-@@ -331,10 +334,31 @@ err:
- 	dev_err(dev, "link never came up\n");
- }
- 
-+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
-+{
-+	u32 reg;
-+
-+	if (!pcie->reset_gpio)
-+		return;
-+
-+	/* PERST does not work for some cards when link training is enabled */
-+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+	reg &= ~LINK_TRAINING_EN;
-+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+	/* 10ms delay is needed for some cards */
-+	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
-+	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
-+	usleep_range(10000, 11000);
-+	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
-+}
-+
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
- 	u32 reg;
- 
-+	advk_pcie_issue_perst(pcie);
-+
- 	/* Set to Direct mode */
- 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
- 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
-@@ -417,7 +441,8 @@ static void advk_pcie_setup_hw(struct ad
- 
- 	/*
- 	 * PERST# signal could have been asserted by pinctrl subsystem before
--	 * probe() callback has been called, making the endpoint going into
-+	 * probe() callback has been called or issued explicitly by reset gpio
-+	 * function advk_pcie_issue_perst(), making the endpoint going into
- 	 * fundamental reset. As required by PCI Express spec a delay for at
- 	 * least 100ms after such a reset before link training is needed.
- 	 */
-@@ -1135,6 +1160,22 @@ static int advk_pcie_probe(struct platfo
- 		return ret;
- 	}
- 
-+	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
-+						       "reset-gpios", 0,
-+						       GPIOD_OUT_LOW,
-+						       "pcie1-reset");
-+	ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
-+	if (ret) {
-+		if (ret == -ENOENT) {
-+			pcie->reset_gpio = NULL;
-+		} else {
-+			if (ret != -EPROBE_DEFER)
-+				dev_err(dev, "Failed to get reset-gpio: %i\n",
-+					ret);
-+			return ret;
-+		}
-+	}
-+
- 	ret = of_pci_get_max_link_speed(dev->of_node);
- 	if (ret <= 0 || ret > 3)
- 		pcie->link_gen = 3;
diff --git a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
deleted file mode 100644
index edff5c4a9c..0000000000
--- a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
+++ /dev/null
@@ -1,152 +0,0 @@ 
-From 366697018c9a2aa67d457bfdc495115cface6ae8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Thu, 30 Apr 2020 10:06:20 +0200
-Subject: [PATCH] PCI: aardvark: Add PHY support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With recent proposed changes for U-Boot it is possible that bootloader
-won't initialize the PHY for this controller (currently the PHY is
-initialized regardless whether PCI is used in U-Boot, but with these
-proposed changes the PHY is initialized only on request).
-
-Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
-PCIe PHY, and since Linux' functionality should be independent on what
-bootloader did, add code for enabling generic PHY if found in device OF
-node.
-
-The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
-Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
-one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
-Instead ARM Trusted Firmware expects PCIe driver to do this step,
-probably because the register is in PCIe controller address space,
-instead of PHY address space. We therefore add this step into the
-advk_pcie_setup_hw function.
-
-[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836
-
-Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++++++++
- 1 file changed, 69 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -16,6 +16,7 @@
- #include <linux/kernel.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/of_address.h>
- #include <linux/of_gpio.h>
-@@ -103,6 +104,8 @@
- #define     PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE	BIT(5)
- #define     PCIE_CORE_CTRL2_OB_WIN_ENABLE	BIT(6)
- #define     PCIE_CORE_CTRL2_MSI_ENABLE		BIT(10)
-+#define PCIE_CORE_REF_CLK_REG			(CONTROL_BASE_ADDR + 0x14)
-+#define     PCIE_CORE_REF_CLK_TX_ENABLE		BIT(1)
- #define PCIE_MSG_LOG_REG			(CONTROL_BASE_ADDR + 0x30)
- #define PCIE_ISR0_REG				(CONTROL_BASE_ADDR + 0x40)
- #define PCIE_MSG_PM_PME_MASK			BIT(7)
-@@ -208,6 +211,7 @@ struct advk_pcie {
- 	int link_gen;
- 	struct pci_bridge_emul bridge;
- 	struct gpio_desc *reset_gpio;
-+	struct phy *phy;
- };
- 
- static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
-@@ -359,6 +363,11 @@ static void advk_pcie_setup_hw(struct ad
- 
- 	advk_pcie_issue_perst(pcie);
- 
-+	/* Enable TX */
-+	reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
-+	reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
-+	advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
-+
- 	/* Set to Direct mode */
- 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
- 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
-@@ -1125,6 +1134,62 @@ out_release_res:
- 	return err;
- }
- 
-+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
-+{
-+	phy_power_off(pcie->phy);
-+	phy_exit(pcie->phy);
-+}
-+
-+static int advk_pcie_enable_phy(struct advk_pcie *pcie)
-+{
-+	int ret;
-+
-+	if (!pcie->phy)
-+		return 0;
-+
-+	ret = phy_init(pcie->phy);
-+	if (ret)
-+		return ret;
-+
-+	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
-+	if (ret) {
-+		phy_exit(pcie->phy);
-+		return ret;
-+	}
-+
-+	ret = phy_power_on(pcie->phy);
-+	if (ret) {
-+		phy_exit(pcie->phy);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int advk_pcie_setup_phy(struct advk_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	struct device_node *node = dev->of_node;
-+	int ret = 0;
-+
-+	pcie->phy = devm_of_phy_get(dev, node, NULL);
-+	if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
-+		return PTR_ERR(pcie->phy);
-+
-+	/* Old bindings miss the PHY handle */
-+	if (IS_ERR(pcie->phy)) {
-+		dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy));
-+		pcie->phy = NULL;
-+		return 0;
-+	}
-+
-+	ret = advk_pcie_enable_phy(pcie);
-+	if (ret)
-+		dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
-+
-+	return ret;
-+}
-+
- static int advk_pcie_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -1182,6 +1247,10 @@ static int advk_pcie_probe(struct platfo
- 	else
- 		pcie->link_gen = ret;
- 
-+	ret = advk_pcie_setup_phy(pcie);
-+	if (ret)
-+		return ret;
-+
- 	advk_pcie_setup_hw(pcie);
- 
- 	ret = advk_sw_pci_bridge_init(pcie);
diff --git a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch b/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
deleted file mode 100644
index dd75470b4d..0000000000
--- a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
+++ /dev/null
@@ -1,93 +0,0 @@ 
-From 715878016984b2617f6c1f177c50039e12e7bd5b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Thu, 30 Apr 2020 10:06:23 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio
- function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We found out that we are unable to control the PERST# signal via the
-default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
-this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
-register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
-value of this register does not change the pin output when measuring
-with voltmeter.
-
-We do not know if this is a bug in the SOC, or if it works only when
-PCIe controller is in a certain state.
-
-Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
-before training link") says that when this pin changes pinctrl mode
-from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
-moment.
-
-So currently the situation is that on A3700 boards the PERST# signal is
-asserted in U-Boot (because the code in U-Boot issues reset via this pin
-via GPIO mode), and then in Linux by the obscure and undocumented
-mechanism described by the above mentioned commit.
-
-We want to issue PERST# signal in a known way, therefore this patch
-changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
-reset-gpios property to the PCIe node in device tree files of
-EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
-has this property and uDPU does not have a PCIe port).
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Cc: Remi Pommarel <repk@triplefau.lt>
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-db.dts           | 3 +++
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 +
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 4 ----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 2 +-
- 4 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
-@@ -128,6 +128,9 @@
- 
- /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
- &pcie0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
-+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- 	status = "okay";
- };
- 
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -59,6 +59,7 @@
- 	phys = <&comphy1 0>;
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
-+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- };
- 
- /* J6 */
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -127,10 +127,6 @@
- 	};
- };
- 
--&pcie_reset_pins {
--	function = "gpio";
--};
--
- &pcie0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -318,7 +318,7 @@
- 
- 				pcie_reset_pins: pcie-reset-pins {
- 					groups = "pcie1";
--					function = "pcie";
-+					function = "gpio";
- 				};
- 
- 				pcie_clkreq_pins: pcie-clkreq-pins {
diff --git a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
deleted file mode 100644
index b851a39a39..0000000000
--- a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
+++ /dev/null
@@ -1,57 +0,0 @@ 
-From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Thu, 30 Apr 2020 10:06:24 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the comphy handle property of the PCIe node from board specific
-device tree files (EspressoBin and Turris Mox) to the generic
-armada-37xx.dtsi.
-
-This is correct since this is the only possible PCIe PHY configuration
-on Armada 37xx, so when PCIe is enabled on any board, this handle is
-correct.
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 1 -
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 1 +
- 3 files changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -56,7 +56,6 @@
- /* J9 */
- &pcie0 {
- 	status = "okay";
--	phys = <&comphy1 0>;
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
- 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -133,7 +133,6 @@
- 	status = "okay";
- 	max-link-speed = <2>;
- 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--	phys = <&comphy1 0>;
- 
- 	/* enabled by U-Boot if PCIe module is present */
- 	status = "disabled";
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -494,6 +494,7 @@
- 					<0 0 0 2 &pcie_intc 1>,
- 					<0 0 0 3 &pcie_intc 2>,
- 					<0 0 0 4 &pcie_intc 3>;
-+			phys = <&comphy1 0>;
- 			pcie_intc: interrupt-controller {
- 				interrupt-controller;
- 				#interrupt-cells = <1>;
diff --git a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch b/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
deleted file mode 100644
index 4442a5ac15..0000000000
--- a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
+++ /dev/null
@@ -1,44 +0,0 @@ 
-From 1b5a2dd9e266d78d5fddd7e6b116e47ba9577b5e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 30 Apr 2020 10:06:25 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the max-link-speed property of the PCIe node from board specific
-device tree files to the generic armada-37xx.dtsi.
-
-Armada 37xx supports only PCIe gen2 speed so max-link-speed property
-should be in the generic armada-37xx.dtsi file.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi           | 1 +
- 2 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -131,7 +131,6 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
- 	status = "okay";
--	max-link-speed = <2>;
- 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- 
- 	/* enabled by U-Boot if PCIe module is present */
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -494,6 +494,7 @@
- 					<0 0 0 2 &pcie_intc 1>,
- 					<0 0 0 3 &pcie_intc 2>,
- 					<0 0 0 4 &pcie_intc 3>;
-+			max-link-speed = <2>;
- 			phys = <&comphy1 0>;
- 			pcie_intc: interrupt-controller {
- 				interrupt-controller;
diff --git a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch b/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
deleted file mode 100644
index 818fce85a8..0000000000
--- a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
+++ /dev/null
@@ -1,53 +0,0 @@ 
-From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 6 May 2020 10:40:37 +0100
-Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../boot/dts/marvell/armada-3720-uDPU.dts     | 22 +++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -117,18 +117,36 @@
- 	};
- };
- 
-+&pinctrl_nb {
-+	i2c1_recovery_pins: i2c1-recovery-pins {
-+		groups = "i2c1";
-+		function = "gpio";
-+	};
-+
-+	i2c2_recovery_pins: i2c2-recovery-pins {
-+		groups = "i2c2";
-+		function = "gpio";
-+	};
-+};
-+
- &i2c0 {
- 	status = "okay";
--	pinctrl-names = "default";
-+	pinctrl-names = "default", "recovery";
- 	pinctrl-0 = <&i2c1_pins>;
-+	pinctrl-1 = <&i2c1_recovery_pins>;
- 	/delete-property/mrvl,i2c-fast-mode;
-+	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- };
- 
- &i2c1 {
- 	status = "okay";
--	pinctrl-names = "default";
-+	pinctrl-names = "default", "recovery";
- 	pinctrl-0 = <&i2c2_pins>;
-+	pinctrl-1 = <&i2c2_recovery_pins>;
- 	/delete-property/mrvl,i2c-fast-mode;
-+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- 
- 	lm75@48 {
- 		status = "okay";
diff --git a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch b/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
deleted file mode 100644
index 04803c90d8..0000000000
--- a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
+++ /dev/null
@@ -1,50 +0,0 @@ 
-From 70e380250c3621c55ff218cbaf2272830d9dbb1d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 2 Jul 2020 10:30:36 +0200
-Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card
- connected
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When there is no PCIe card connected and advk_pcie_rd_conf() or
-advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
-root bridge, the aardvark driver throws the following error message:
-
-  advk-pcie d0070000.pcie: config read/write timed out
-
-Obviously accessing PCIe registers of disconnected card is not possible.
-
-Extend check in advk_pcie_valid_device() function for validating
-availability of PCIe bus. If PCIe link is down, then the device is marked
-as Not Found and the driver does not try to access these registers.
-
-This is just an optimization to prevent accessing PCIe registers when card
-is disconnected. Trying to access PCIe registers of disconnected card does
-not cause any crash, kernel just needs to wait for a timeout. So if card
-disappear immediately after checking for PCIe link (before accessing PCIe
-registers), it does not cause any problems.
-
-Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -650,6 +650,13 @@ static bool advk_pcie_valid_device(struc
- 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
- 		return false;
- 
-+	/*
-+	 * If the link goes down after we check for link-up, nothing bad
-+	 * happens but the config access times out.
-+	 */
-+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
-+		return false;
-+
- 	return true;
- }
- 
diff --git a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch b/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
deleted file mode 100644
index 64ea26559e..0000000000
--- a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
+++ /dev/null
@@ -1,207 +0,0 @@ 
-From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
-Date: Wed, 15 Jul 2020 15:35:14 +0200
-Subject: [PATCH] power: reset: add driver for LinkStation power off
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some Buffalo LinkStations perform the power off operation, at restart
-time, depending on the state of an output pin (LED2/INTn) at the ethernet
-PHY. This pin is also used to wake the machine when a WoL packet is
-received by the PHY.
-
-The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU),
-and other models. Without it, the board remains forever halted if a
-power off command is executed, unless the PSU is disconnected and
-connected again.
-
-Add the driver to provide the power off function and also make the WoL
-feature to be available.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
----
- drivers/power/reset/Kconfig                |  11 ++
- drivers/power/reset/Makefile               |   1 +
- drivers/power/reset/linkstation-poweroff.c | 136 +++++++++++++++++++++
- 3 files changed, 148 insertions(+)
- create mode 100644 drivers/power/reset/linkstation-poweroff.c
-
---- a/drivers/power/reset/Kconfig
-+++ b/drivers/power/reset/Kconfig
-@@ -99,6 +99,17 @@ config POWER_RESET_HISI
- 	help
- 	  Reboot support for Hisilicon boards.
- 
-+config POWER_RESET_LINKSTATION
-+	tristate "Buffalo LinkStation power-off driver"
-+	depends on ARCH_MVEBU || COMPILE_TEST
-+	depends on OF_MDIO && PHYLIB
-+	help
-+	  This driver supports turning off some Buffalo LinkStations by
-+	  setting an output pin at the ethernet PHY to the correct state.
-+	  It also makes the device compatible with the WoL function.
-+
-+	  Say Y here if you have a Buffalo LinkStation LS421D/E.
-+
- config POWER_RESET_MSM
- 	bool "Qualcomm MSM power-off driver"
- 	depends on ARCH_QCOM
---- a/drivers/power/reset/Makefile
-+++ b/drivers/power/reset/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF
- obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
- obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
- obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
-+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
- obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
- obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
- obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
---- /dev/null
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -0,0 +1,144 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * LinkStation power off restart driver
-+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/notifier.h>
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_platform.h>
-+#include <linux/reboot.h>
-+#include <linux/phy.h>
-+
-+/* Defines from the eth phy Marvell driver */
-+#define MII_MARVELL_COPPER_PAGE		0
-+#define MII_MARVELL_LED_PAGE		3
-+#define MII_MARVELL_WOL_PAGE		17
-+#define MII_MARVELL_PHY_PAGE		22
-+
-+#define MII_PHY_LED_CTRL		16
-+#define MII_88E1318S_PHY_LED_TCR	18
-+#define MII_88E1318S_PHY_WOL_CTRL	16
-+#define MII_M1011_IEVENT		19
-+
-+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE		BIT(7)
-+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
-+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS	BIT(12)
-+#define LED2_FORCE_ON					(0x8 << 8)
-+#define LEDMASK						GENMASK(11,8)
-+
-+static struct phy_device *phydev;
-+
-+static void mvphy_reg_intn(u16 data)
-+{
-+	int rc = 0, saved_page;
-+
-+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
-+	if (saved_page < 0)
-+		goto err;
-+
-+	/* Force manual LED2 control to let INTn work */
-+	__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
-+
-+	/* Set the LED[2]/INTn pin to the required state */
-+	__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
-+		     MII_88E1318S_PHY_LED_TCR_FORCE_INT,
-+		     MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
-+
-+	if (!data) {
-+		/* Clear interrupts to ensure INTn won't be holded in high state */
-+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
-+		__phy_read(phydev, MII_M1011_IEVENT);
-+
-+		/* If WOL was enabled and a magic packet was received before powering
-+		 * off, we won't be able to wake up by sending another magic packet.
-+		 * Clear WOL status.
-+		 */
-+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
-+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
-+			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
-+	}
-+err:
-+	rc = phy_restore_page(phydev, saved_page, rc);
-+	if (rc < 0)
-+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
-+
-+	if (!data) {
-+		/* Slow down the PHY to save energy */
-+		rc= phy_speed_down(phydev, false);
-+		if (rc < 0)
-+			dev_err(&phydev->mdio.dev, "PHY speed down failed, %d\n", rc);
-+	}
-+}
-+
-+static int linkstation_reboot_notifier(struct notifier_block *nb,
-+				       unsigned long action, void *unused)
-+{
-+	if (action == SYS_RESTART)
-+		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block linkstation_reboot_nb = {
-+	.notifier_call = linkstation_reboot_notifier,
-+};
-+
-+static void linkstation_poweroff(void)
-+{
-+	unregister_reboot_notifier(&linkstation_reboot_nb);
-+	mvphy_reg_intn(0);
-+
-+	kernel_restart("Power off");
-+}
-+
-+static const struct of_device_id ls_poweroff_of_match[] = {
-+	{ .compatible = "buffalo,ls421d" },
-+	{ .compatible = "buffalo,ls421de" },
-+	{ },
-+};
-+
-+static int __init linkstation_poweroff_init(void)
-+{
-+	struct mii_bus *bus;
-+	struct device_node *dn;
-+
-+	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
-+	if (!dn)
-+		return -ENODEV;
-+	of_node_put(dn);
-+
-+	dn = of_find_node_by_name(NULL, "mdio");
-+	if (!dn)
-+		return -ENODEV;
-+
-+	bus = of_mdio_find_bus(dn);
-+	of_node_put(dn);
-+	if (!bus)
-+		return -EPROBE_DEFER;
-+
-+	phydev = phy_find_first(bus);
-+	if (!phydev)
-+		return -EPROBE_DEFER;
-+
-+	register_reboot_notifier(&linkstation_reboot_nb);
-+	pm_power_off = linkstation_poweroff;
-+
-+	pr_info("LinkStation power off driver registered\n");
-+	return 0;
-+}
-+
-+static void __exit linkstation_poweroff_exit(void)
-+{
-+	pm_power_off = NULL;
-+	unregister_reboot_notifier(&linkstation_reboot_nb);
-+}
-+
-+module_init(linkstation_poweroff_init);
-+module_exit(linkstation_poweroff_exit);
-+
-+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
-+MODULE_DESCRIPTION("LinkStation power off driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
deleted file mode 100644
index ff67c9c02f..0000000000
--- a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
+++ /dev/null
@@ -1,44 +0,0 @@ 
-From b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Wed, 2 Sep 2020 16:43:44 +0200
-Subject: [PATCH] PCI: aardvark: Fix initialization with old Marvell's Arm
- Trusted Firmware
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Old ATF automatically power on pcie phy and does not provide SMC call for
-phy power on functionality which leads to aardvark initialization failure:
-
-[    0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
-[    0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95
-[    0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95)
-[    0.351160] advk-pcie: probe of d0070000.pcie failed with error -95
-
-This patch fixes above failure by ignoring 'not supported' error in
-aardvark driver. In this case it is expected that phy is already power on.
-
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org
-Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
----
- drivers/pci/controller/pci-aardvark.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1165,7 +1165,9 @@ static int advk_pcie_enable_phy(struct a
- 	}
- 
- 	ret = phy_power_on(pcie->phy);
--	if (ret) {
-+	if (ret == -EOPNOTSUPP) {
-+		dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
-+	} else if (ret) {
- 		phy_exit(pcie->phy);
- 		return ret;
- 	}
diff --git a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch b/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
deleted file mode 100644
index 927670d8b3..0000000000
--- a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
+++ /dev/null
@@ -1,88 +0,0 @@ 
-From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Mon, 7 Sep 2020 13:27:17 +0200
-Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Espressobin boards have 3 ethernet ports and some of them got assigned more
-then one MAC address. MAC addresses are stored in U-Boot environment.
-
-Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave
-device") kernel can use MAC addresses from DT for particular DSA port.
-
-Currently Espressobin DTS file contains alias just for ethernet0.
-
-This patch defines additional ethernet aliases in Espressobin DTS files, so
-bootloader can fill correct MAC address for DSA switch ports if more MAC
-addresses were specified.
-
-DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
-are used for lan ports for both Espressobin revisions (V5 and V7).
-
-Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
-Cc: <stable@vger.kernel.org> # a2c7023f7075c: dsa: read mac address
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Andre Heider <a.heider@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../dts/marvell/armada-3720-espressobin-v7-emmc.dts  | 10 ++++++++--
- .../boot/dts/marvell/armada-3720-espressobin-v7.dts  | 10 ++++++++--
- 3 files changed, 24 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
-@@ -15,16 +15,22 @@
- 	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
- 		     "globalscale,espressobin", "marvell,armada3720",
- 		     "marvell,armada3710";
-+
-+	aliases {
-+		/* ethernet1 is wan port */
-+		ethernet1 = &switch0port3;
-+		ethernet3 = &switch0port1;
-+	};
- };
- 
- &ports {
--	port@1 {
-+	switch0port1: port@1 {
- 		reg = <1>;
- 		label = "lan1";
- 		phy-handle = <&switch0phy0>;
- 	};
- 
--	port@3 {
-+	switch0port3: port@3 {
- 		reg = <3>;
- 		label = "wan";
- 		phy-handle = <&switch0phy2>;
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
-@@ -14,16 +14,22 @@
- 	model = "Globalscale Marvell ESPRESSOBin Board V7";
- 	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
- 		     "marvell,armada3720", "marvell,armada3710";
-+
-+	aliases {
-+		/* ethernet1 is wan port */
-+		ethernet1 = &switch0port3;
-+		ethernet3 = &switch0port1;
-+	};
- };
- 
- &ports {
--	port@1 {
-+	switch0port1: port@1 {
- 		reg = <1>;
- 		label = "lan1";
- 		phy-handle = <&switch0phy0>;
- 	};
- 
--	port@3 {
-+	switch0port3: port@3 {
- 		reg = <3>;
- 		label = "wan";
- 		phy-handle = <&switch0phy2>;
diff --git a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
deleted file mode 100644
index c3abae60a6..0000000000
--- a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
+++ /dev/null
@@ -1,65 +0,0 @@ 
-From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 10 Nov 2020 16:38:31 +0100
-Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
-
-With board revision 1.3, SolidRun moved the power LED to the middle of
-the board. In old place of power LED a GPIO controllable heartbeat LED
-was added. This commit only touches Single Shot variant, since only this
-variant is all revision 1.3.
-
-Note:
-This is slightly modified patch. Some boards could be placed in an
-enclosure, so the LED18 is enabled by default, since that'll be the only
-visible indicator that the board is operating.
-
-Reported-by: Alexandra Alth <alexandra@alth.de>
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../marvell/armada-8040-mcbin-singleshot.dts  | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -5,6 +5,8 @@
-  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
-  */
- 
-+#include <dt-bindings/leds/common.h>
-+
- #include "armada-8040-mcbin.dtsi"
- 
- / {
-@@ -12,6 +14,20 @@
- 	compatible = "marvell,armada8040-mcbin-singleshot",
- 			"marvell,armada8040-mcbin", "marvell,armada8040",
- 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&cp0_led18_pins>;
-+		pinctrl-names = "default";
-+
-+		led18 {
-+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_GREEN>;
-+			linux,default-trigger = "heartbeat";
-+			default-state = "on";
-+		};
-+	};
- };
- 
- &cp0_eth0 {
-@@ -27,3 +43,10 @@
- 	managed = "in-band-status";
- 	sfp = <&sfp_eth1>;
- };
-+
-+&cp0_pinctrl {
-+	cp0_led18_pins: led18-pins {
-+		marvell,pins = "mpp33";
-+		marvell,function = "gpio";
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
deleted file mode 100644
index 7a4b511998..0000000000
--- a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
+++ /dev/null
@@ -1,74 +0,0 @@ 
-From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:17 +0100
-Subject: ARM: dts: turris-omnia: enable HW buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The buffer manager is available on Turris Omnia but needs to be
-described in device-tree to be used.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
-(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -84,12 +84,23 @@
- 	};
- };
- 
-+&bm {
-+	status = "okay";
-+};
-+
-+&bm_bppi {
-+	status = "okay";
-+};
-+
- /* Connected to 88E6176 switch, port 6 */
- &eth0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ge0_rgmii_pins>;
- 	status = "okay";
- 	phy-mode = "rgmii";
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <0>;
-+	bm,pool-short = <3>;
- 
- 	fixed-link {
- 		speed = <1000>;
-@@ -103,6 +114,9 @@
- 	pinctrl-0 = <&ge1_rgmii_pins>;
- 	status = "okay";
- 	phy-mode = "rgmii";
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <1>;
-+	bm,pool-short = <3>;
- 
- 	fixed-link {
- 		speed = <1000>;
-@@ -115,6 +129,9 @@
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <2>;
-+	bm,pool-short = <3>;
- };
- 
- &i2c0 {
diff --git a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
deleted file mode 100644
index 99ed07e13b..0000000000
--- a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
+++ /dev/null
@@ -1,37 +0,0 @@ 
-From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:18 +0100
-Subject: ARM: dts: turris-omnia: add comphy handle to eth2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
-be able to switch between 1G and 2.5G modes the comphy link has to be
-defined.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Andreas Färber <afaerber@suse.de>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -129,6 +129,7 @@
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
-+	phys = <&comphy5 2>;
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
- 	bm,pool-short = <3>;
diff --git a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
deleted file mode 100644
index 4bbd80aac4..0000000000
--- a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
+++ /dev/null
@@ -1,61 +0,0 @@ 
-From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:19 +0100
-Subject: ARM: dts: turris-omnia: describe switch interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe switch interrupt for Turris Omnia so that the CPU does not have
-to poll the switch. We also need to to set mpp45 pin to gpio function
-for this.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -261,13 +261,18 @@
- 
- 	/* Switch MV88E6176 at address 0x10 */
- 	switch@10 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&swint_pins>;
- 		compatible = "marvell,mv88e6085";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		dsa,member = <0 0>;
- 
-+		dsa,member = <0 0>;
- 		reg = <0x10>;
- 
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-+
- 		ports {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-@@ -320,6 +325,11 @@
- 		marvell,function = "gpio";
- 	};
- 
-+	swint_pins: swint-pins {
-+		marvell,pins = "mpp45";
-+		marvell,function = "gpio";
-+	};
-+
- 	spi0cs0_pins: spi0cs0-pins {
- 		marvell,pins = "mpp25";
- 		marvell,function = "spi0";
diff --git a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch b/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
deleted file mode 100644
index 2447a4e240..0000000000
--- a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
+++ /dev/null
@@ -1,90 +0,0 @@ 
-From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 16 Nov 2020 13:24:22 +0100
-Subject: ARM: dts: turris-omnia: add SFP node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turris Omnia has an SFP cage that, together with WAN PHY, is connected
-to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
-the multiplexor switches the SerDes signal from PHY to SFP.
-
-Describe the SFP cage, but leave it disabled. Until phylink has support
-for such configuration, we are leaving it to U-Boot to enable SFP and
-disable WAN PHY at boot time depending on whether a SFP module is
-present.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++-
- 1 file changed, 29 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -82,6 +82,24 @@
- 			};
- 		};
- 	};
-+
-+	sfp: sfp {
-+		compatible = "sff,sfp";
-+		i2c-bus = <&sfp_i2c>;
-+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
-+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
-+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
-+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
-+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
-+		maximum-power-milliwatt = <3000>;
-+
-+		/*
-+		 * For now this has to be enabled at boot time by U-Boot when
-+		 * a SFP module is present. Read more in the comment in the
-+		 * eth2 node below.
-+		 */
-+		status = "disabled";
-+	};
- };
- 
- &bm {
-@@ -126,10 +144,20 @@
- 
- /* WAN port */
- &eth2 {
-+	/*
-+	 * eth2 is connected via a multiplexor to both the SFP cage and to
-+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
-+	 * a SFP module is present, as determined by the mode-def0 GPIO.
-+	 *
-+	 * Until kernel supports this configuration properly, in case SFP module
-+	 * is present, U-Boot has to enable the sfp node above, remove phy
-+	 * handle and add managed = "in-band-status" property.
-+	 */
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
- 	phys = <&comphy5 2>;
-+	sfp = <&sfp>;
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
- 	bm,pool-short = <3>;
-@@ -195,7 +223,7 @@
- 			/* routed to PCIe2 connector (CN62A) */
- 		};
- 
--		i2c@4 {
-+		sfp_i2c: i2c@4 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <4>;
diff --git a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch b/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
deleted file mode 100644
index 5ceef5dc46..0000000000
--- a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
+++ /dev/null
@@ -1,52 +0,0 @@ 
-From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:22 +0100
-Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use property name `phy-handle` instead of the deprecated `phy` to
-connect eth2 to the PHY.
-Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
-incorrect according to device-tree bindings documentation.
-Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
-needed. Kernel can read the PHY identifier itself.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -155,7 +155,7 @@
- 	 */
- 	status = "okay";
- 	phy-mode = "sgmii";
--	phy = <&phy1>;
-+	phy-handle = <&phy1>;
- 	phys = <&comphy5 2>;
- 	sfp = <&sfp>;
- 	buffer-manager = <&bm>;
-@@ -278,9 +278,9 @@
- 	pinctrl-0 = <&mdio_pins>;
- 	status = "okay";
- 
--	phy1: phy@1 {
-+	phy1: ethernet-phy@1 {
- 		status = "okay";
--		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
-+		compatible = "ethernet-phy-ieee802.3-c22";
- 		reg = <1>;
- 		marvell,reg-init = <3 18 0 0x4985>;
- 
diff --git a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
deleted file mode 100644
index 4283a61341..0000000000
--- a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
+++ /dev/null
@@ -1,33 +0,0 @@ 
-From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Wed, 17 Feb 2021 15:30:38 +0000
-Subject: ARM: dts: turris-omnia: fix hardware buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware buffer management has never worked on the Turris Omnia, as the
-required MBus window hadn't been reserved. Fix thusly.
-
-Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
-Reviewed-by: Marek Behún <kabel@kernel.org>
-Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -31,7 +31,8 @@
- 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
--			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- 
- 		internal-regs {
- 
diff --git a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index fd60cdb322..0000000000
--- a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,208 +0,0 @@ 
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch 
-did not pass the bootloader cmdline on if no append-rootblock stanza 
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
----
- arch/arm/Kconfig                        | 11 ++++
- arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
- init/main.c                             | 16 +++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- 	  The command-line arguments provided by the boot loader will be
- 	  appended to the the device tree bootargs property.
- 
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+	bool "Append rootblock parsing bootloader's kernel arguments"
-+	help
-+	  The command-line arguments provided by the boot loader will be
-+	  appended to a new device tree property: bootloader-args.
-+	  If there is a property "append-rootblock" in DT under /chosen 
-+	  and a root= option in bootloaders command line it will be parsed 
-+	  and added to DT bootargs with the form: <append-rootblock>XX.
-+	  Only command line ATAG will be processed, the rest of the ATAGs
-+	  sent by bootloader will be ignored.
-+
- endchoice
- 
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
- 
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,72 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+	char *ptr, *end;
-+	char *root="root=";
-+	int i, l;
-+	const char *rootblock;
-+
-+	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+	ptr = str - 1;
-+
-+	do {
-+		//first find an 'r' at the begining or after a space
-+		do {
-+			ptr++;
-+			ptr = strchr(ptr, 'r');
-+			if (!ptr)
-+				goto no_append;
-+
-+		} while (ptr != str && *(ptr-1) != ' ');
-+
-+		//then check for the rest
-+		for(i = 1; i <= 4; i++)
-+			if(*(ptr+i) != *(root+i)) break;
-+
-+	} while (i != 5);
-+
-+	end = strchr(ptr, ' ');
-+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+	ptr = end + 1;
-+
-+	/* if append-rootblock property is set use it to append to command line */
-+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+	if (rootblock == NULL)
-+		goto no_append;
-+
-+	if (*dest != ' ') {
-+		*dest = ' ';
-+		dest++;
-+		len++;
-+	}
-+
-+	if (len + l + i <= COMMAND_LINE_SIZE) {
-+		memcpy(dest, rootblock, l);
-+		dest += l - 1;
-+		memcpy(dest, ptr, i);
-+		dest += i;
-+	}
-+
-+	return dest;
-+
-+no_append:
-+	len = strlen(str);
-+	if (len + 1 < COMMAND_LINE_SIZE) {
-+		memcpy(dest, str, len);
-+		dest += len;
-+	}
-+
-+	return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +154,21 @@ static void merge_fdt_bootargs(void *fdt
- 
- 	/* and append the ATAG_CMDLINE */
- 	if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+		//save original bootloader args
-+		//and append ubi.mtd with root partition number to current cmdline
-+		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- 		len = strlen(fdt_cmdline);
- 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- 			*ptr++ = ' ';
- 			memcpy(ptr, fdt_cmdline, len);
- 			ptr += len;
- 		}
-+#endif
- 	}
- 	*ptr = '\0';
- 
-@@ -166,7 +243,9 @@ int atags_to_fdt(void *atag_list, void *
- 			else
- 				setprop_string(fdt, "/chosen", "bootargs",
- 					       atag->u.cmdline.cmdline);
--		} else if (atag->hdr.tag == ATAG_MEM) {
-+		}
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+		else if (atag->hdr.tag == ATAG_MEM) {
- 			if (memcount >= sizeof(mem_reg_property)/4)
- 				continue;
- 			if (!atag->u.mem.size)
-@@ -210,6 +289,10 @@ int atags_to_fdt(void *atag_list, void *
- 		setprop(fdt, "/memory", "reg", mem_reg_property,
- 			4 * memcount * memsize);
- 	}
-+#else
-+
-+	}
-+#endif
- 
- 	return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -104,6 +104,10 @@
- #define CREATE_TRACE_POINTS
- #include <trace/events/initcall.h>
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
- 
- extern void init_IRQ(void);
-@@ -631,6 +635,18 @@ asmlinkage __visible void __init start_k
- 	page_alloc_init();
- 
- 	pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+	//Show bootloader's original command line for reference
-+	if(of_chosen) {
-+		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+		if(prop)
-+			pr_notice("Bootloader command line (ignored): %s\n", prop);
-+		else
-+			pr_notice("Bootloader command line not present\n");
-+	}
-+#endif
-+
- 	/* parameters may set static keys */
- 	jump_label_init();
- 	parse_early_param();
diff --git a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
deleted file mode 100644
index b8ab700c97..0000000000
--- a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
+++ /dev/null
@@ -1,10 +0,0 @@ 
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -69,6 +69,7 @@ config MACH_ARMADA_38X
- 	select HAVE_SMP
- 	select MACH_MVEBU_V7
- 	select PINCTRL_ARMADA_38X
-+	select ARCH_WANT_LIBATA_LEDS
- 	help
- 	  Say 'Y' here if you want your kernel to support boards based
- 	  on the Marvell Armada 380/385 SoC with device tree.
diff --git a/target/linux/mvebu/patches-5.4/302-add_powertables.patch b/target/linux/mvebu/patches-5.4/302-add_powertables.patch
deleted file mode 100644
index efbbbc7d78..0000000000
--- a/target/linux/mvebu/patches-5.4/302-add_powertables.patch
+++ /dev/null
@@ -1,770 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -212,11 +212,19 @@
- &pcie1 {
- 	/* Marvell 88W8864, 5GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,2ghz = <0>;
-+	};
- };
- 
- &pcie2 {
- 	/* Marvell 88W8864, 2GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,5ghz = <0>;
-+	};
- };
- 
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+			CA =
-+				<36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+			CN =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+			ETSI =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+			FCC =
-+				<36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+			CN =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- 	};
- };
- 
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
- &sdhci {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -225,12 +225,100 @@
- 	pcie@2,0 {
- 		/* Port 0, Lane 1 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,5ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+				ETSI =
-+					<1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+			};
-+		};
- 	};
- 
- 	/* Second mini-PCIe port */
- 	pcie@3,0 {
- 		/* Port 0, Lane 3 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,2ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+				ETSI =
-+					<36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+			};
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
deleted file mode 100644
index 89a5e19803..0000000000
--- a/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
+++ /dev/null
@@ -1,17 +0,0 @@ 
-Newer Linksys boards might come with a Winbond W29N02GV which can be
-configured in different ways. Make sure we configure it the same way
-as the older chips so everything keeps working.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -148,6 +148,8 @@
- 		reg = <0>;
- 		label = "pxa3xx_nand-0";
- 		nand-rb = <0>;
-+		nand-ecc-strength = <4>;
-+		nand-ecc-step-size = <512>;
- 		marvell,nand-keep-config;
- 		nand-on-flash-bbt;
- 	};
diff --git a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch b/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
deleted file mode 100644
index 930c0f9494..0000000000
--- a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
- 
- &i2c0 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11000 0x100>;
- };
- 
- &i2c1 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11100 0x100>;
- };
- 
diff --git a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
deleted file mode 100644
index 31bd53b1f3..0000000000
--- a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- 		compatible = "st,m25p128", "jedec,spi-nor";
- 		reg = <0>; /* Chip select 0 */
- 		spi-max-frequency = <108000000>;
-+
-+		partition@0 {
-+			label = "uboot";
-+			reg = <0 0x400000>;
-+		};
-+
-+		partition@1 {
-+			label = "firmware";
-+			reg = <0x400000 0xc00000>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
deleted file mode 100644
index 2057e31c7e..0000000000
--- a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
+++ /dev/null
@@ -1,35 +0,0 @@ 
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- 			#size-cells = <1>;
- 
- 			partition@0 {
--				label = "U-Boot";
-+				label = "u-boot";
- 				reg = <0x00000000 0x00800000>;
- 				read-only;
- 			};
- 
- 			partition@800000 {
--				label = "uImage";
-+				label = "kernel";
- 				reg = <0x00800000 0x00400000>;
- 				read-only;
- 			};
- 
- 			partition@c00000 {
--				label = "Root";
-+				label = "ubi";
- 				reg = <0x00c00000 0x3f400000>;
- 			};
- 		};
diff --git a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
deleted file mode 100644
index 16112d53fc..0000000000
--- a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
+++ /dev/null
@@ -1,10 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -485,3 +485,7 @@
- 		};
- 	};
- };
-+
-+&coherencyfab {
-+	broken-idle;
-+};
diff --git a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
deleted file mode 100644
index 4315abc7d2..0000000000
--- a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
+++ /dev/null
@@ -1,11 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -387,7 +387,7 @@
- 
- 			port@4 {
- 				reg = <4>;
--				label = "internet";
-+				label = "wan";
- 			};
- 
- 			port@5 {
diff --git a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch b/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
deleted file mode 100644
index e5e83572c9..0000000000
--- a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
+++ /dev/null
@@ -1,50 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- 	compatible = "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -71,7 +78,7 @@
- 		pinctrl-0 = <&gpio_leds_pins>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 		};
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- 	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- 		     "marvell,armadaxp", "marvell,armada-370-xp";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200";
- 		stdout-path = &uart0;
-@@ -197,7 +204,7 @@
- 		pinctrl-0 = <&power_led_pin>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			label = "mamba:white:power";
- 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
diff --git a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch b/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
deleted file mode 100644
index 84d49a004b..0000000000
--- a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
+++ /dev/null
@@ -1,25 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
- 
- &eth2 {
--	status = "okay";
-+	status = "disabled";
- 	phy-mode = "sgmii";
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- 				label = "wan";
- 			};
- 
--			port@5 {
--				reg = <5>;
-+			port@6 {
-+				reg = <6>;
- 				label = "cpu";
--				ethernet = <&eth2>;
-+				ethernet = <&eth0>;
- 
- 				fixed-link {
- 					speed = <1000>;
diff --git a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch b/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
deleted file mode 100644
index a5d3e63810..0000000000
--- a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
+++ /dev/null
@@ -1,68 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
- 
- / {
- 	model = "Linksys WRT3200ACM";
--	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
- 
- / {
--	model = "Linksys WRT1900AC";
--	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
--		     "marvell,armadaxp", "marvell,armada-370-xp";
-+	model = "Linksys WRT1900AC v1";
-+	compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+		     "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+		     "marvell,armada-370-xp";
- 
- 	aliases {
- 		led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
- 
- / {
--	model = "Linksys WRT1900ACv2";
--	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+	model = "Linksys WRT1900AC v2";
-+	compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1200AC";
--	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1900ACS";
--	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+	compatible = "linksys,wrt1900acs", "linksys,shelby",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 
diff --git a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
deleted file mode 100644
index dd2bef7f63..0000000000
--- a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
+++ /dev/null
@@ -1,87 +0,0 @@ 
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts     |  1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi     | 62 ++++++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
- 
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
- 
- / {
- 	model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ *  Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board.  Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License
-+ *     version 2 as published by the Free Software Foundation.
-+ *
-+ *     This file is distributed in the hope that it will be useful
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+	soc {
-+		internal-regs {
-+			sdhci@d8000 {
-+				bus-width = <4>;
-+				no-1-8-v;
-+				non-removable;
-+				pinctrl-0 = <&microsom_sdhci_pins>;
-+				pinctrl-names = "default";
-+				status = "okay";
-+				wp-inverted;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
deleted file mode 100644
index b837989d48..0000000000
--- a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
+++ /dev/null
@@ -1,25 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -24,6 +24,10 @@
- 	aliases {
- 		/* So that mvebu u-boot can update the MAC addresses */
- 		ethernet1 = &eth0;
-+		led-boot = &led_status;
-+		led-failsafe = &led_status;
-+		led-running = &led_status;
-+		led-upgrade = &led_status;
- 	};
- 
- 	chosen {
-@@ -73,10 +77,9 @@
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&helios_system_led_pins>;
- 
--		status-led {
-+		led_status: status-led {
- 			label = "helios4:green:status";
- 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
--			linux,default-trigger = "heartbeat";
- 			default-state = "on";
- 		};
- 
diff --git a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
deleted file mode 100644
index e989f59d5c..0000000000
--- a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
+++ /dev/null
@@ -1,20 +0,0 @@ 
-From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Tue, 4 Jul 2017 19:25:28 -0600
-Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
-
-Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -18,6 +18,7 @@
- 	#size-cells = <2>;
- 
- 	aliases {
-+		ethernet0 = &eth0;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
- 	};
diff --git a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
deleted file mode 100644
index a741e378d9..0000000000
--- a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
+++ /dev/null
@@ -1,26 +0,0 @@ 
-From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 9 Apr 2019 15:53:42 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
- phandle
-
-Instead of referencing the whole mdio node, add ports phandle to adjust
-port labels in dts for different hardware iterations of ESPRESSObin
-boards.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -147,7 +147,7 @@
- 
- 		dsa,member = <0 0>;
- 
--		ports {
-+		ports: ports {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 
diff --git a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
deleted file mode 100644
index 2240d0b39e..0000000000
--- a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
+++ /dev/null
@@ -1,34 +0,0 @@ 
-Certain SFP modules (most notably Nokia GPON ones) first check
-connectivity on 1000base-x, and switch to 2500base-x afterwards. This
-is considered a quirk so the phylink switches the interface to
-2500base-x as well.
-
-However, after power-cycling the uDPU device, network interface/SFP module
-will not work correctly until the module is re-seated. This patch
-resolves this issue by forcing the interface to be brought up in
-2500base-x mode by default.
-
-Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
-Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -162,7 +162,7 @@
- };
- 
- &eth0 {
--	phy-mode = "sgmii";
-+	phy-mode = "2500base-x";
- 	status = "okay";
- 	managed = "in-band-status";
- 	phys = <&comphy1 0>;
-@@ -170,7 +170,7 @@
- };
- 
- &eth1 {
--	phy-mode = "sgmii";
-+	phy-mode = "2500base-x";
- 	status = "okay";
- 	managed = "in-band-status";
- 	phys = <&comphy0 1>;
diff --git a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
deleted file mode 100644
index f1fddceff4..0000000000
--- a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
+++ /dev/null
@@ -1,37 +0,0 @@ 
-From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
-From: Tad <tad@spotco.us>
-Date: Fri, 5 Feb 2021 22:32:11 -0500
-Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
- partition to 4MB
-
-Signed-off-by: Tad Davanzo <tad@spotco.us>
----
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -456,9 +456,9 @@
- 				reg = <0xa00000 0x2800000>;  /* 40MB */
- 			};
- 
--			partition@d00000 {
-+			partition@e00000 {
- 				label = "rootfs1";
--				reg = <0xd00000 0x2500000>;  /* 37MB */
-+				reg = <0xe00000 0x2400000>;  /* 36MB */
- 			};
- 
- 			/* kernel2 overlaps with rootfs2 by design */
-@@ -467,9 +467,9 @@
- 				reg = <0x3200000 0x2800000>; /* 40MB */
- 			};
- 
--			partition@3500000 {
-+			partition@3600000 {
- 				label = "rootfs2";
--				reg = <0x3500000 0x2500000>; /* 37MB */
-+				reg = <0x3600000 0x2400000>; /* 36MB */
- 			};
- 
- 			/*
diff --git a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
deleted file mode 100644
index 19378870ef..0000000000
--- a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
+++ /dev/null
@@ -1,29 +0,0 @@ 
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -234,7 +234,7 @@
- 				clocks = <&gateclk 23>;
- 				clock-names = "cesa0";
- 				marvell,crypto-srams = <&crypto_sram>;
--				marvell,crypto-sram-size = <0x7e0>;
-+				marvell,crypto-sram-size = <0x800>;
- 			};
- 		};
- 
-@@ -255,12 +255,17 @@
- 			 * cpuidle workaround.
- 			 */
- 			idle-sram@0 {
-+				status = "disabled";
- 				reg = <0x0 0x20>;
- 			};
- 		};
- 	};
- };
- 
-+&coherencyfab {
-+	broken-idle;
-+};
-+
- /*
-  * Default UART pinctrl setting without RTS/CTS, can be overwritten on
-  * board level if a different configuration is used.
diff --git a/target/linux/mvebu/patches-5.4/400-find_active_root.patch b/target/linux/mvebu/patches-5.4/400-find_active_root.patch
deleted file mode 100644
index 65c43740fc..0000000000
--- a/target/linux/mvebu/patches-5.4/400-find_active_root.patch
+++ /dev/null
@@ -1,60 +0,0 @@ 
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
- 	bool dedicated = true;
-@@ -133,9 +136,13 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -249,6 +256,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
deleted file mode 100644
index 201864eef1..0000000000
--- a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
+++ /dev/null
@@ -1,38 +0,0 @@ 
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4691,6 +4691,16 @@ static int mvneta_ethtool_set_eee(struct
- 	return phylink_ethtool_set_eee(pp->phylink, eee);
- }
- 
-+#ifndef CONFIG_ARM64
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+			       struct net_device *sb_dev)
-+{
-+	/* XXX: hardware queue scheduling is broken,
-+	 * use only one queue until it is fixed */
-+	return 0;
-+}
-+#endif
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- 	.ndo_open            = mvneta_open,
- 	.ndo_stop            = mvneta_stop,
-@@ -4701,6 +4711,9 @@ static const struct net_device_ops mvnet
- 	.ndo_fix_features    = mvneta_fix_features,
- 	.ndo_get_stats64     = mvneta_get_stats64,
- 	.ndo_do_ioctl        = mvneta_ioctl,
-+#ifndef CONFIG_ARM64
-+	.ndo_select_queue    = mvneta_select_queue,
-+#endif
- 	.ndo_bpf             = mvneta_xdp,
- 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
- };
diff --git a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
deleted file mode 100644
index 29f36be460..0000000000
--- a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
+++ /dev/null
@@ -1,40 +0,0 @@ 
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered.  Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states.  Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- 	ret = mvebu_v7_cpu_suspend(deepidle);
- 	cpu_pm_exit();
- 
-+	/*
-+	 * If we failed to enter the desired state, indicate that we
-+	 * slept lightly.
-+	 */
- 	if (ret)
--		return ret;
-+		return 0;
- 
- 	return index;
- }
diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
deleted file mode 100644
index 49ea3de0d1..0000000000
--- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
+++ /dev/null
@@ -1,60 +0,0 @@ 
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve
- 
- 	if (port->reset_gpio) {
- 		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+		unsigned int i;
- 
- 		of_property_read_u32(port->dn, "reset-delay-us",
- 				     &reset_udelay);
-@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve
- 		udelay(100);
- 
- 		gpiod_set_value_cansleep(port->reset_gpio, 0);
--		msleep(reset_udelay / 1000);
-+		for (i = 0; i < reset_udelay; i += 1000) {
-+			if (mvebu_pcie_link_up(port))
-+				break;
-+			msleep(1);
-+		}
-+
-+		printk("%s: reset completed in %dus\n", port->name, i);
- 	}
- 
- 	return 0;
-@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf
- 		if (!child)
- 			continue;
- 
--		ret = mvebu_pcie_powerup(port);
--		if (ret < 0)
--			continue;
--
- 		port->base = mvebu_pcie_map_registers(pdev, child, port);
- 		if (IS_ERR(port->base)) {
- 			dev_err(dev, "%s: cannot map registers\n", port->name);
- 			port->base = NULL;
--			mvebu_pcie_powerdown(port);
-+			continue;
-+		}
-+
-+		ret = mvebu_pcie_powerup(port);
-+		if (ret < 0) {
-+			port->base = NULL;
- 			continue;
- 		}
-