@@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
-PKG_VERSION:=5.4
+PKG_VERSION:=5.8
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=@KERNEL/software/network/iw
-PKG_HASH:=a2469f677088d7b1070a7fbb28f3c747041697e8f6ec70783339cb1bc27a395f
+PKG_HASH:=b59c4bacb0b6675cc09f2f30ebdceb91174cb65443d0a062fba2c09fad772db4
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=GPL-2.0
@@ -1,696 +1,21 @@
--- a/nl80211.h
+++ b/nl80211.h
-@@ -11,7 +11,7 @@
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015-2017 Intel Deutschland GmbH
-- * Copyright (C) 2018-2019 Intel Corporation
-+ * Copyright (C) 2018-2020 Intel Corporation
+@@ -2515,6 +2515,9 @@ enum nl80211_commands {
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ * association request when used with NL80211_CMD_NEW_STATION).
*
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -249,6 +249,45 @@
- */
-
- /**
-+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
-+ *
-+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
-+ * support offloading VLAN functionality in a manner where the driver exposes a
-+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
-+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
-+ * case. Frames received from stations that are not assigned to any VLAN are
-+ * delivered on the main netdev and frames to such stations can be sent through
-+ * that main netdev.
-+ *
-+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
-+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
-+ * %NL80211_ATTR_VLAN_ID.
-+ */
-+
-+/**
-+ * DOC: TID configuration
-+ *
-+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
-+ * attribute given in wiphy capabilities.
-+ *
-+ * The necessary configuration parameters are mentioned in
-+ * &enum nl80211_tid_config_attr and it will be passed to the
-+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
-+ *
-+ * If the configuration needs to be applied for specific peer then the MAC
-+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
-+ * configuration will be applied for all the connected peers in the vif except
-+ * any peers that have peer specific configuration for the TID by default; if
-+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
-+ * will be overwritten.
-+ *
-+ * All this configuration is valid only for STA's current connection
-+ * i.e. the configuration will be reset to default when the STA connects back
-+ * after disconnection/roaming, and this configuration will be cleared when
-+ * the interface goes down.
-+ */
-+
-+/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
-@@ -257,13 +296,14 @@
- * to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
-- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
-- * attributes determining the channel width; this is used for setting
-- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT,
-- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
-- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
-- * instead, the support here is for backward compatibility only.
-+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
-+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
-+ * channel width; this is used for setting monitor mode channel),
-+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
-+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
-+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,
-+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
-+ * compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- * %NL80211_ATTR_WIPHY_NAME.
-@@ -312,7 +352,8 @@
- * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
- * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
- * The channel to use can be set on the interface or be given using the
-- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
-+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
-+ * attributes determining channel width.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
-@@ -497,11 +538,12 @@
- * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- * the SSID (mainly for association, but is included in authentication
-- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
-- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
-- * is used to specify the authentication type. %NL80211_ATTR_IE is used to
-- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
-- * to be added to the frame.
-+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
-+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
-+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
-+ * authentication type. %NL80211_ATTR_IE is used to define IEs
-+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
-+ * to the frame.
- * When used as an event, this reports reception of an Authentication
- * frame in station and IBSS modes when the local MLME processed the
- * frame, i.e., it was for the local STA and was received in correct
-@@ -556,8 +598,9 @@
- * requests to connect to a specified network but without separating
- * auth and assoc steps. For this, you need to specify the SSID in a
- * %NL80211_ATTR_SSID attribute, and can optionally specify the association
-- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
-- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
-+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
-+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
-+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
- * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
-@@ -571,6 +614,14 @@
- * set of BSSID,frequency parameters is used (i.e., either the enforcing
- * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
- * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
-+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
-+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
-+ * included, these IEs through %NL80211_ATTR_IE are specified by the user
-+ * space based on the best possible BSS selected. Thus, if the driver ends
-+ * up selecting a different BSS, it can modify these IEs accordingly (e.g.
-+ * userspace asks the driver to perform PMKSA caching with BSS1 and the
-+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
-+ * has to get updated with the apt PMKID).
- * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
- * the ESS in case the device is already associated and an association with
- * a different BSS is desired.
-@@ -640,6 +691,10 @@
- * four bytes for vendor frames including the OUI. The registration
- * cannot be dropped, but is removed automatically when the netlink
- * socket is closed. Multiple registrations can be made.
-+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
-+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
-+ * case the registration can also be modified to include/exclude the
-+ * flag, rather than requiring unregistration to change it.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- * backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
-@@ -739,7 +794,7 @@
- * various triggers. These triggers can be configured through this
- * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- * more background information, see
-- * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
-+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
- * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
- * from the driver reporting the wakeup reason. In this case, the
- * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
-@@ -1101,6 +1156,20 @@
- * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
- * content. The frame is ethernet data.
- *
-+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
-+ * is passed using %NL80211_ATTR_TID_CONFIG attribute.
-+ *
-+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
-+ * frame. This event is used to indicate that a received Beacon frame was
-+ * dropped because it did not include a valid MME MIC while beacon
-+ * protection was enabled (BIGTK configured in station mode).
-+ *
-+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
-+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
-+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
-+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included
-+ * if the recipient acknowledged the frame.
-+ *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-@@ -1325,6 +1394,12 @@ enum nl80211_commands {
-
- NL80211_CMD_PROBE_MESH_LINK,
-
-+ NL80211_CMD_SET_TID_CONFIG,
-+
-+ NL80211_CMD_UNPROT_BEACON,
-+
-+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
-+
- /* add new commands above here */
-
- /* used to define NL80211_CMD_MAX below */
-@@ -1370,7 +1445,8 @@ enum nl80211_commands {
- * of &enum nl80211_chan_width, describing the channel width. See the
- * documentation of the enum for more information.
- * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
-- * channel, used for anything but 20 MHz bandwidth
-+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the
-+ * operating channel center frequency.
- * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
- * channel, used only for 80+80 MHz bandwidth
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
-@@ -1580,7 +1656,8 @@ enum nl80211_commands {
- * flag is included, then control port frames are sent over NL80211 instead
- * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
- * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
-- * flag.
-+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
-+ * frames are not forwared over the control port.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- * We recommend using nested, driver-specific attributes within this.
-@@ -2373,6 +2450,64 @@ enum nl80211_commands {
- * the allowed channel bandwidth configurations. (u8 attribute)
- * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- *
-+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
-+ * (u16).
-+ *
-+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
-+ *
-+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
-+ * using attributes from &enum nl80211_iftype_akm_attributes. This
-+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
-+ * supported AKM suites capability per interface. AKMs advertised in
-+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
-+ * advertised for a specific interface type.
-+ *
-+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
-+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
-+ * on output (in wiphy attributes) it contains only the feature sub-
-+ * attributes.
-+ *
-+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
-+ * port in order to forward/receive them as ordinary data frames.
-+ *
-+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
-+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
-+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA.
-+ * Drivers that trigger roaming need to know the lifetime of the
-+ * configured PMKSA for triggering the full vs. PMKSA caching based
-+ * authentication. This timeout helps authentication methods like SAE,
-+ * where PMK gets updated only by going through a full (new SAE)
-+ * authentication instead of getting updated during an association for EAP
-+ * authentication. No new full authentication within the PMK expiry shall
-+ * result in a disassociation at the end of the lifetime.
-+ *
-+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
-+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME
-+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
-+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
-+ * driver to trigger a full authentication roam (without PMKSA caching)
-+ * after the reauthentication threshold time, but before the PMK lifetime
-+ * has expired.
-+ *
-+ * Authentication methods like SAE need to be able to generate a new PMKSA
-+ * entry without having to force a disconnection after the PMK timeout. If
-+ * no roaming occurs between the reauth threshold and PMK expiration,
-+ * disassociation is still forced.
-+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
-+ * %NL80211_CMD_REGISTER_FRAME command, see the description there.
-+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
-+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
-+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
-+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
-+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
-+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
-+ *
-+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
-+ * association request when used with NL80211_CMD_NEW_STATION).
-+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2835,6 +2970,28 @@ enum nl80211_attrs {
- NL80211_ATTR_WIPHY_EDMG_CHANNELS,
- NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+@@ -2997,6 +3000,8 @@ enum nl80211_attrs {
+
+ NL80211_ATTR_HE_6GHZ_CAPABILITY,
-+ NL80211_ATTR_VLAN_ID,
-+
-+ NL80211_ATTR_HE_BSS_COLOR,
-+
-+ NL80211_ATTR_IFTYPE_AKM_SUITES,
-+
-+ NL80211_ATTR_TID_CONFIG,
-+
-+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
-+
-+ NL80211_ATTR_PMK_LIFETIME,
-+ NL80211_ATTR_PMK_REAUTH_THRESHOLD,
-+
-+ NL80211_ATTR_RECEIVE_MULTICAST,
-+ NL80211_ATTR_WIPHY_FREQ_OFFSET,
-+ NL80211_ATTR_CENTER_FREQ1_OFFSET,
-+ NL80211_ATTR_SCAN_FREQ_KHZ,
-+
-+ NL80211_ATTR_HE_6GHZ_CAPABILITY,
-+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info {
- * defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- * defined
-+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
-+ * given for all 6 GHz band channels
- * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_band_iftype_attr {
-@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr {
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
-+ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
-
- /* keep last */
- __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
-@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule {
- * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
- * This is a nested attribute that contains the wmm limitation per AC.
- * (see &enum nl80211_wmm_rule)
-+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
-+ * in current regulatory domain.
-+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- * currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
-@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr {
- NL80211_FREQUENCY_ATTR_NO_20MHZ,
- NL80211_FREQUENCY_ATTR_NO_10MHZ,
- NL80211_FREQUENCY_ATTR_WMM,
-+ NL80211_FREQUENCY_ATTR_NO_HE,
-+ NL80211_FREQUENCY_ATTR_OFFSET,
-
- /* keep last */
- __NL80211_FREQUENCY_ATTR_AFTER_LAST,
-@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr {
- * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
- * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
- * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
-+ * @NL80211_RRF_NO_HE: HE operation not allowed
- */
- enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_OFDM = 1<<0,
-@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_HT40PLUS = 1<<14,
- NL80211_RRF_NO_80MHZ = 1<<15,
- NL80211_RRF_NO_160MHZ = 1<<16,
-+ NL80211_RRF_NO_HE = 1<<17,
- };
-
- #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
-@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width {
- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
- * Contains a nested array of signal strength attributes (u8, dBm),
- * using the nesting index as the antenna number.
-+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-@@ -4375,6 +4543,7 @@ enum nl80211_bss {
- NL80211_BSS_PARENT_TSF,
- NL80211_BSS_PARENT_BSSID,
- NL80211_BSS_CHAIN_SIGNAL,
-+ NL80211_BSS_FREQUENCY_OFFSET,
-
- /* keep last */
- __NL80211_BSS_AFTER_LAST,
-@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types {
- * See &enum nl80211_key_default_types.
- * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
- * Defaults to @NL80211_KEY_RX_TX.
-+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
- *
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
-@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes {
- NL80211_KEY_TYPE,
- NL80211_KEY_DEFAULT_TYPES,
- NL80211_KEY_MODE,
-+ NL80211_KEY_DEFAULT_BEACON,
-
- /* keep last */
- __NL80211_KEY_AFTER_LAST,
-@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting {
- };
-
- /**
-+ * enum nl80211_tid_config - TID config state
-+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
-+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
-+ */
-+enum nl80211_tid_config {
-+ NL80211_TID_CONFIG_ENABLE,
-+ NL80211_TID_CONFIG_DISABLE,
-+};
-+
-+/* enum nl80211_tx_rate_setting - TX rate configuration type
-+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
-+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
-+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
-+ */
-+enum nl80211_tx_rate_setting {
-+ NL80211_TX_RATE_AUTOMATIC,
-+ NL80211_TX_RATE_LIMITED,
-+ NL80211_TX_RATE_FIXED,
-+};
-+
-+/* enum nl80211_tid_config_attr - TID specific configuration.
-+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
-+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
-+ * for per-vif configuration; doesn't list the ones that are generic
-+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
-+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
-+ * per peer instead.
-+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
-+ * that the new configuration overrides all previous peer
-+ * configurations, otherwise previous peer specific configurations
-+ * should be left untouched.
-+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
-+ * Its type is u16.
-+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
-+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
-+ * Its type is u8.
-+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
-+ * transmission, user-space sets this configuration in
-+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
-+ * the max value is advertised by the driver in this attribute on
-+ * output in wiphy capabilities.
-+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
-+ * transmission, user-space sets this configuration in
-+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
-+ * the max value is advertised by the driver in this attribute on
-+ * output in wiphy capabilities.
-+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
-+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
-+ * Its type is u8, using the values from &nl80211_tid_config.
-+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
-+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
-+ * the values from &nl80211_tid_config.
-+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
-+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
-+ * Its type is u8, using the values from &nl80211_tid_config.
-+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
-+ * to notfiy the driver that what type of txrate should be used
-+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
-+ * the values form &nl80211_tx_rate_setting.
-+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
-+ * with the parameters passed through %NL80211_ATTR_TX_RATES.
-+ * configuration is applied to the data frame for the tid to that connected
-+ * station.
-+ */
-+enum nl80211_tid_config_attr {
-+ __NL80211_TID_CONFIG_ATTR_INVALID,
-+ NL80211_TID_CONFIG_ATTR_PAD,
-+ NL80211_TID_CONFIG_ATTR_VIF_SUPP,
-+ NL80211_TID_CONFIG_ATTR_PEER_SUPP,
-+ NL80211_TID_CONFIG_ATTR_OVERRIDE,
-+ NL80211_TID_CONFIG_ATTR_TIDS,
-+ NL80211_TID_CONFIG_ATTR_NOACK,
-+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
-+ NL80211_TID_CONFIG_ATTR_RETRY_LONG,
-+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
-+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
-+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
-+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
-+ NL80211_TID_CONFIG_ATTR_TX_RATE,
-+
-+ /* keep last */
-+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
-+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
-+};
-+
-+/**
- * enum nl80211_packet_pattern_attr - packet pattern attribute
- * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
-@@ -5144,6 +5401,8 @@ enum plink_actions {
-
- #define NL80211_KCK_LEN 16
- #define NL80211_KEK_LEN 16
-+#define NL80211_KCK_EXT_LEN 24
-+#define NL80211_KEK_EXT_LEN 32
- #define NL80211_REPLAY_CTR_LEN 8
-
- /**
-@@ -5152,6 +5411,7 @@ enum plink_actions {
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
-+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data {
- NL80211_REKEY_DATA_KEK,
- NL80211_REKEY_DATA_KCK,
- NL80211_REKEY_DATA_REPLAY_CTR,
-+ NL80211_REKEY_DATA_AKM,
-
- /* keep last */
- NUM_NL80211_REKEY_DATA,
-@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags {
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
- * station mode (SAE password is passed as part of the connect command).
- *
-+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
-+ * with VLAN tagged frames and separate VLAN-specific netdevs added using
-+ * vconfig similarly to the Ethernet case.
-+ *
-+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
-+ * feature, which prevents bufferbloat by using the expected transmission
-+ * time to limit the amount of data buffered in the hardware.
-+ *
-+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
-+ * and can receive key configuration for BIGTK using key indexes 6 and 7.
-+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
-+ * protection as a client only and cannot transmit protected beacons.
-+ *
-+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
-+ * forwarding of preauth frames over the control port. They are then
-+ * handled as ordinary data frames.
-+ *
-+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
-+ *
-+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
-+ * in IBSS mode, essentially by dropping their state.
-+ *
-+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
-+ * are possible for multicast frames and those will be reported properly.
-+ *
-+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
-+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
-+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
-+ * included in the scan request.
-+ *
-+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
-+ * can report tx status for control port over nl80211 tx operations.
-+ *
- * @NUM_NL80211_EXT_FEATURES: number of extended features.
- * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
- */
-@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index {
- NL80211_EXT_FEATURE_EXT_KEY_ID,
- NL80211_EXT_FEATURE_STA_TX_PWR,
- NL80211_EXT_FEATURE_SAE_OFFLOAD,
-+ NL80211_EXT_FEATURE_VLAN_OFFLOAD,
-+ NL80211_EXT_FEATURE_AQL,
-+ NL80211_EXT_FEATURE_BEACON_PROTECTION,
-+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
-+ NL80211_EXT_FEATURE_PROTECTED_TWT,
-+ NL80211_EXT_FEATURE_DEL_IBSS_STA,
-+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
-+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
-+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
-+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
-
- /* add new features before the definition below */
- NUM_NL80211_EXT_FEATURES,
-@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason {
- * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
- * only have supported rates and no additional capabilities (unless
- * added by userspace explicitly.)
-+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
-+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
-+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
- */
- enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
-@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
- NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
- NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
-+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
- };
-
- /**
-@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats {
- * @NL80211_PREAMBLE_HT: HT preamble
- * @NL80211_PREAMBLE_VHT: VHT preamble
- * @NL80211_PREAMBLE_DMG: DMG preamble
-+ * @NL80211_PREAMBLE_HE: HE preamble
- */
- enum nl80211_preamble {
- NL80211_PREAMBLE_LEGACY,
- NL80211_PREAMBLE_HT,
- NL80211_PREAMBLE_VHT,
- NL80211_PREAMBLE_DMG,
-+ NL80211_PREAMBLE_HE,
- };
-
- /**
-@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs {
- * is valid)
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
- * the maximum FTMs per burst (if not present anything is valid)
-+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
-+ * trigger based ranging measurement is supported
-+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
-+ * if non trigger based ranging measurement is supported
- *
- * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
-@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa {
- NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
- NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
- NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
-+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
-+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
-
- /* keep last */
- NUM_NL80211_PMSR_FTM_CAPA_ATTR,
-@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa {
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
- * (flag)
-+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
-+ * measurement (flag).
-+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
-+ * mutually exclusive.
-+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
-+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
-+ * ranging will be used.
-+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
-+ * ranging measurement (flag)
-+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
-+ * mutually exclusive.
-+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
-+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
-+ * ranging will be used.
- *
- * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
- * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
-@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req {
- NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
- NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
- NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
-+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
-+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
-
- /* keep last */
- NUM_NL80211_PMSR_FTM_REQ_ATTR,
-@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes {
- NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
- };
-
-+/**
-+ * enum nl80211_bss_color_attributes - BSS Color attributes
-+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
-+ *
-+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
-+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
-+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
-+ *
-+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
-+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
-+ */
-+enum nl80211_bss_color_attributes {
-+ __NL80211_HE_BSS_COLOR_ATTR_INVALID,
-+
-+ NL80211_HE_BSS_COLOR_ATTR_COLOR,
-+ NL80211_HE_BSS_COLOR_ATTR_DISABLED,
-+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
-+
-+ /* keep last */
-+ __NL80211_HE_BSS_COLOR_ATTR_LAST,
-+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
-+};
-+
-+/**
-+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes
-+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
-+ *
-+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
-+ * attribute for each interface type that supports AKM suites specified in
-+ * %NL80211_IFTYPE_AKM_ATTR_SUITES
-+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
-+ * AKM suites for the specified interface types.
-+ *
-+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
-+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
-+ */
-+enum nl80211_iftype_akm_attributes {
-+ __NL80211_IFTYPE_AKM_ATTR_INVALID,
-+
-+ NL80211_IFTYPE_AKM_ATTR_IFTYPES,
-+ NL80211_IFTYPE_AKM_ATTR_SUITES,
-+
-+ /* keep last */
-+ __NL80211_IFTYPE_AKM_ATTR_LAST,
-+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
-+};
-
- #endif /* __LINUX_NL80211_H */
@@ -1,6 +1,6 @@
--- a/event.c
+++ b/event.c
-@@ -699,6 +699,7 @@ static int print_event(struct nl_msg *ms
+@@ -944,6 +944,7 @@ static int print_event(struct nl_msg *ms
}
switch (gnlh->cmd) {
@@ -8,15 +8,15 @@
case NL80211_CMD_NEW_WIPHY:
printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME]));
break;
-@@ -734,6 +735,7 @@ static int print_event(struct nl_msg *ms
+@@ -979,6 +980,7 @@ static int print_event(struct nl_msg *ms
case NL80211_CMD_SCHED_SCAN_RESULTS:
printf("got scheduled scan results\n");
break;
+#endif
+ case NL80211_CMD_WIPHY_REG_CHANGE:
case NL80211_CMD_REG_CHANGE:
- printf("regulatory domain change: ");
-
-@@ -812,6 +814,7 @@ static int print_event(struct nl_msg *ms
+ if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE)
+@@ -1061,6 +1063,7 @@ static int print_event(struct nl_msg *ms
mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
printf("del station %s\n", macbuf);
break;
@@ -24,10 +24,10 @@
case NL80211_CMD_JOIN_IBSS:
mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
printf("IBSS %s joined\n", macbuf);
-@@ -989,9 +992,9 @@ static int print_event(struct nl_msg *ms
- parse_nan_match(tb);
+@@ -1254,9 +1257,9 @@ static int print_event(struct nl_msg *ms
+ case NL80211_CMD_CH_SWITCH_NOTIFY:
+ parse_ch_switch_notify(tb, gnlh->cmd);
break;
- }
+#endif
default:
- printf("unknown event %d (%s)\n",
@@ -38,7 +38,7 @@
--- a/info.c
+++ b/info.c
-@@ -164,6 +164,7 @@ static int print_phy_handler(struct nl_m
+@@ -167,6 +167,7 @@ static int print_phy_handler(struct nl_m
tb_band[NL80211_BAND_ATTR_VHT_MCS_SET])
print_vht_info(nla_get_u32(tb_band[NL80211_BAND_ATTR_VHT_CAPA]),
nla_data(tb_band[NL80211_BAND_ATTR_VHT_MCS_SET]));
@@ -46,7 +46,7 @@
if (tb_band[NL80211_BAND_ATTR_IFTYPE_DATA]) {
struct nlattr *nl_iftype;
int rem_band;
-@@ -171,6 +172,7 @@ static int print_phy_handler(struct nl_m
+@@ -174,6 +175,7 @@ static int print_phy_handler(struct nl_m
nla_for_each_nested(nl_iftype, tb_band[NL80211_BAND_ATTR_IFTYPE_DATA], rem_band)
print_he_info(nl_iftype);
}
@@ -54,7 +54,7 @@
if (tb_band[NL80211_BAND_ATTR_FREQS]) {
if (!band_had_freq) {
printf("\t\tFrequencies:\n");
-@@ -213,6 +215,7 @@ next:
+@@ -216,6 +218,7 @@ next:
}
}
@@ -62,7 +62,7 @@
if (tb_band[NL80211_BAND_ATTR_RATES]) {
printf("\t\tBitrates (non-HT):\n");
nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
-@@ -229,6 +232,7 @@ next:
+@@ -232,6 +235,7 @@ next:
printf("\n");
}
}
@@ -70,7 +70,7 @@
}
}
-@@ -294,6 +298,7 @@ next:
+@@ -297,6 +301,7 @@ next:
printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
}
@@ -78,7 +78,7 @@
if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
int i;
-@@ -305,6 +310,7 @@ next:
+@@ -308,6 +313,7 @@ next:
cipher_name(ciphers[i]));
}
}
@@ -86,7 +86,7 @@
if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
-@@ -324,11 +330,13 @@ next:
+@@ -327,11 +333,13 @@ next:
printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
}
@@ -100,7 +100,7 @@
if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
struct nlattr *nl_combi;
-@@ -425,6 +433,7 @@ broken_combination:
+@@ -428,6 +436,7 @@ broken_combination:
printf("\tinterface combinations are not supported\n");
}
@@ -108,7 +108,7 @@
if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
printf("\tSupported commands:\n");
nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
-@@ -522,6 +531,7 @@ broken_combination:
+@@ -525,6 +534,7 @@ broken_combination:
printf("\t\t * wake up on TCP connection\n");
}
}
@@ -116,7 +116,7 @@
if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
printf("\tDevice supports roaming.\n");
-@@ -560,6 +570,7 @@ broken_combination:
+@@ -563,6 +573,7 @@ broken_combination:
}
}
@@ -124,7 +124,7 @@
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
-@@ -624,6 +635,7 @@ broken_combination:
+@@ -627,6 +638,7 @@ broken_combination:
if (features & NL80211_FEATURE_ND_RANDOM_MAC_ADDR)
printf("\tDevice supports randomizing MAC-addr in net-detect scans.\n");
}
@@ -132,7 +132,7 @@
if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
printf("\tDevice supports T-DLS.\n");
-@@ -732,6 +744,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+@@ -762,6 +774,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
@@ -140,7 +140,7 @@
static int handle_commands(struct nl80211_state *state, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
{
-@@ -743,6 +756,7 @@ static int handle_commands(struct nl8021
+@@ -773,6 +786,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");
@@ -150,7 +150,7 @@
{
--- a/scan.c
+++ b/scan.c
-@@ -1195,6 +1195,9 @@ static void print_ht_op(const uint8_t ty
+@@ -1297,6 +1297,9 @@ static void print_ht_op(const uint8_t ty
printf("\t\t * secondary channel offset: %s\n",
ht_secondary_offset[data[1] & 0x3]);
printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
@@ -160,7 +160,7 @@
printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
-@@ -1522,6 +1525,14 @@ static void print_ie(const struct ie_pri
+@@ -1707,6 +1710,14 @@ static void print_ie(const struct ie_pri
static const struct ie_print ieprinters[] = {
[0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
@@ -175,12 +175,15 @@
[1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
[3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
[5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
-@@ -1531,21 +1542,15 @@ static const struct ie_print ieprinters[
+@@ -1716,26 +1727,20 @@ static const struct ie_print ieprinters[
[32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
[35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
[42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
- [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), },
[47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), },
+ [51] = { "AP Channel Report", print_ap_channel_report, 1, 255, BIT(PRINT_SCAN), },
+ [59] = { "Supported operating classes", print_supp_op_classes, 1, 255, BIT(PRINT_SCAN), },
+ [66] = { "Measurement Pilot Transmission", print_measurement_pilot_tx, 1, 255, BIT(PRINT_SCAN), },
[74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), },
- [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
- [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
@@ -188,17 +191,19 @@
- [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
- [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
[50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+ [70] = { "RM enabled capabilities", print_rm_enabled_capabilities, 5, 5, BIT(PRINT_SCAN), },
[113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
- [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
[108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
- [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },
+ [111] = { "802.11u Roaming Consortium", print_11u_rcon, 2, 255, BIT(PRINT_SCAN), },
+ [195] = { "Transmit Power Envelope", print_tx_power_envelope, 2, 5, BIT(PRINT_SCAN), },
+#endif
};
static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data,
-@@ -2024,6 +2029,7 @@ void print_ies(unsigned char *ie, int ie
+@@ -2279,6 +2284,7 @@ void print_ies(unsigned char *ie, int ie
ieprinters[ie[0]].flags & BIT(ptype)) {
print_ie(&ieprinters[ie[0]],
ie[0], ie[1], ie + 2, &ie_buffer);
@@ -206,7 +211,7 @@
} else if (ie[0] == 221 /* vendor */) {
print_vendor(ie[1], ie + 2, unknown, ptype);
} else if (unknown) {
-@@ -2033,6 +2039,7 @@ void print_ies(unsigned char *ie, int ie
+@@ -2288,6 +2294,7 @@ void print_ies(unsigned char *ie, int ie
for (i=0; i<ie[1]; i++)
printf(" %.2x", ie[2+i]);
printf("\n");
@@ -214,7 +219,7 @@
}
ielen -= ie[1] + 2;
ie += ie[1] + 2;
-@@ -2073,6 +2080,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2328,6 +2335,7 @@ static void print_capa_non_dmg(__u16 cap
printf(" ESS");
if (capa & WLAN_CAPABILITY_IBSS)
printf(" IBSS");
@@ -222,7 +227,7 @@
if (capa & WLAN_CAPABILITY_CF_POLLABLE)
printf(" CfPollable");
if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
-@@ -2101,6 +2109,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2356,6 +2364,7 @@ static void print_capa_non_dmg(__u16 cap
printf(" DelayedBACK");
if (capa & WLAN_CAPABILITY_IMM_BACK)
printf(" ImmediateBACK");
@@ -230,7 +235,7 @@
}
static int print_bss_handler(struct nl_msg *msg, void *arg)
-@@ -2185,8 +2194,10 @@ static int print_bss_handler(struct nl_m
+@@ -2440,8 +2449,10 @@ static int print_bss_handler(struct nl_m
if (bss[NL80211_BSS_FREQUENCY]) {
int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
printf("\tfreq: %d\n", freq);
@@ -241,7 +246,7 @@
}
if (bss[NL80211_BSS_BEACON_INTERVAL])
printf("\tbeacon interval: %d TUs\n",
-@@ -2380,6 +2391,7 @@ static int handle_stop_sched_scan(struct
+@@ -2635,6 +2646,7 @@ static int handle_stop_sched_scan(struct
return 0;
}
@@ -249,7 +254,7 @@
COMMAND(scan, sched_start,
SCHED_SCAN_OPTIONS,
NL80211_CMD_START_SCHED_SCAN, 0, CIB_NETDEV, handle_start_sched_scan,
-@@ -2390,3 +2402,4 @@ COMMAND(scan, sched_start,
+@@ -2645,3 +2657,4 @@ COMMAND(scan, sched_start,
COMMAND(scan, sched_stop, "",
NL80211_CMD_STOP_SCHED_SCAN, 0, CIB_NETDEV, handle_stop_sched_scan,
"Stop an ongoing scheduled scan.");
@@ -272,7 +277,7 @@
int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
{
-@@ -298,6 +300,9 @@ int parse_keys(struct nl_msg *msg, char
+@@ -311,6 +313,9 @@ int parse_keys(struct nl_msg *msg, char
char keybuf[13];
int pos = 0;
@@ -284,7 +289,7 @@
--- a/Makefile
+++ b/Makefile
-@@ -22,6 +22,12 @@ _OBJS := $(sort $(patsubst %.c,%.o,$(wil
+@@ -23,6 +23,12 @@ _OBJS := $(sort $(patsubst %.c,%.o,$(wil
VERSION_OBJS := $(filter-out version.o, $(_OBJS))
OBJS := $(VERSION_OBJS) version.o
@@ -299,7 +304,7 @@
ifeq ($(NO_PKG_CONFIG),)
--- a/station.c
+++ b/station.c
-@@ -759,10 +759,12 @@ static int handle_station_set_plink(stru
+@@ -777,10 +777,12 @@ static int handle_station_set_plink(stru
nla_put_failure:
return -ENOBUFS;
}
@@ -312,7 +317,7 @@
static int handle_station_set_vlan(struct nl80211_state *state,
struct nl_msg *msg,
-@@ -857,11 +859,13 @@ static int handle_station_set_mesh_power
+@@ -875,11 +877,13 @@ static int handle_station_set_mesh_power
nla_put_failure:
return -ENOBUFS;
}
@@ -348,10 +353,10 @@
SECTION(switch);
COMMAND(switch, freq,
"<freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons <count>] [block-tx]\n"
-@@ -727,3 +730,4 @@ COMMAND(switch, freq,
- "Switch the operating channel by sending a channel switch announcement (CSA).");
- COMMAND(switch, channel, "<channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons <count>] [block-tx]",
- NL80211_CMD_CHANNEL_SWITCH, 0, CIB_NETDEV, handle_chan, NULL);
+@@ -956,3 +959,4 @@ COMMAND(set, tidconf, "[peer <MAC addres
+ " $ iw dev wlan0 tids 0x3 override ampdu on noack on rtscts on\n"
+ " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x1 ampdu off tids 0x3 amsdu off rtscts on\n"
+ );
+#endif
--- a/phy.c
+++ b/phy.c
The ipk sizes for mips_24Kc change like this: old: iw_5.4-1_mips_24kc.ipk 35.767 iw-full_5.4-1_mips_24kc.ipk 68.423 new: iw_5.8-1_mips_24kc.ipk 36.883 iw-full_5.8-1_mips_24kc.ipk 71.992 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- package/network/utils/iw/Makefile | 4 +- .../utils/iw/patches/001-nl80211_h_sync.patch | 687 +----------------- .../utils/iw/patches/200-reduce_size.patch | 85 ++- 3 files changed, 53 insertions(+), 723 deletions(-)