diff mbox series

[v3,4/4] tools: addfwhrd Linksys FW header genarator - needed for factory FW updata over stock WEB interface

Message ID 20200901043709.1804-5-todorcolov@abv.bg
State Rejected
Headers show
Series ipq806x: add support for Linksys E8350 - Cover letter | expand

Commit Message

Todor Colov Sept. 1, 2020, 4:37 a.m. UTC
---
 tools/firmware-utils/Makefile                 |   4 +-
 tools/firmware-utils/src/linksys/addfwhdr.c   | 195 ++++++++
 tools/firmware-utils/src/linksys/bcmdefs.h    | 318 +++++++++++++
 .../firmware-utils/src/linksys/code_pattern.h | 396 ++++++++++++++++
 tools/firmware-utils/src/linksys/crc.c        | 290 ++++++++++++
 tools/firmware-utils/src/linksys/crc.h        |  69 +++
 tools/firmware-utils/src/linksys/cyutils.h    | 348 ++++++++++++++
 tools/firmware-utils/src/linksys/typedefs.h   | 447 ++++++++++++++++++
 8 files changed, 2066 insertions(+), 1 deletion(-)
 create mode 100644 tools/firmware-utils/src/linksys/addfwhdr.c
 create mode 100644 tools/firmware-utils/src/linksys/bcmdefs.h
 create mode 100644 tools/firmware-utils/src/linksys/code_pattern.h
 create mode 100644 tools/firmware-utils/src/linksys/crc.c
 create mode 100644 tools/firmware-utils/src/linksys/crc.h
 create mode 100644 tools/firmware-utils/src/linksys/cyutils.h
 create mode 100644 tools/firmware-utils/src/linksys/typedefs.h

Comments

Adrian Schmutzler Sept. 20, 2020, 7:31 p.m. UTC | #1
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org]
> On Behalf Of Todor Colov
> Sent: Dienstag, 1. September 2020 06:37
> To: openwrt-devel@lists.openwrt.org
> Cc: Todor Colov <todorcolov@abv.bg>
> Subject: [PATCH v3 4/4] tools: addfwhrd Linksys FW header genarator -
> needed for factory FW updata over stock WEB interface
> 
> ---
>  tools/firmware-utils/Makefile                 |   4 +-
>  tools/firmware-utils/src/linksys/addfwhdr.c   | 195 ++++++++
>  tools/firmware-utils/src/linksys/bcmdefs.h    | 318 +++++++++++++
>  .../firmware-utils/src/linksys/code_pattern.h | 396 ++++++++++++++++
>  tools/firmware-utils/src/linksys/crc.c        | 290 ++++++++++++
>  tools/firmware-utils/src/linksys/crc.h        |  69 +++
>  tools/firmware-utils/src/linksys/cyutils.h    | 348 ++++++++++++++
>  tools/firmware-utils/src/linksys/typedefs.h   | 447 ++++++++++++++++++
>  8 files changed, 2066 insertions(+), 1 deletion(-)
>  create mode 100644 tools/firmware-utils/src/linksys/addfwhdr.c
>  create mode 100644 tools/firmware-utils/src/linksys/bcmdefs.h
>  create mode 100644 tools/firmware-utils/src/linksys/code_pattern.h
>  create mode 100644 tools/firmware-utils/src/linksys/crc.c
>  create mode 100644 tools/firmware-utils/src/linksys/crc.h
>  create mode 100644 tools/firmware-utils/src/linksys/cyutils.h
>  create mode 100644 tools/firmware-utils/src/linksys/typedefs.h
> 
> diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
> index 39c3503886..1dcbd0db77 100644
> --- a/tools/firmware-utils/Makefile
> +++ b/tools/firmware-utils/Makefile
> @@ -24,6 +24,8 @@ endef
> 
>  define Host/Compile
>  	mkdir -p $(HOST_BUILD_DIR)/bin
> +	mkdir -p $(HOST_BUILD_DIR)/bin/linksys
> +	$(call cc,linksys/addfwhdr linksys/crc )

I'd personally really like if you followed the existing scheme here, so no folders, proper alphabetic sorting, and one file per line.

Best

Adrian

>  	$(call cc,add_header)
>  	$(call cc,addpattern)
>  	$(call cc,asustrx)
> @@ -98,7 +100,7 @@ define Host/Compile
>  endef
> 
>  define Host/Install
> -	$(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/*
> $(STAGING_DIR_HOST)/bin/
> +	$(CP) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
>  endef
> 
>  $(eval $(call HostBuild))
> diff --git a/tools/firmware-utils/src/linksys/addfwhdr.c b/tools/firmware-
> utils/src/linksys/addfwhdr.c
> new file mode 100644
> index 0000000000..6e2896c62d
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/addfwhdr.c
> @@ -0,0 +1,195 @@
> +#include <stdio.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <sys/stat.h>
> +#include <stdarg.h>
> +#include <getopt.h>
> +#include <time.h>
> +#include <sys/time.h>
> +
> +#include "cyutils.h"
> +#include "code_pattern.h"
> +
> +#include "typedefs.h"
> +
> +#define MAX_BUF	1024
> +#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum
> value */
> +
> +extern uint32 crc32(uint8 *pdata, uint nbytes, uint32 crc);
> +
> +int fd, fd_w;
> +
> +void die(const char * str, ...)
> +{
> +	va_list args;
> +	va_start(args, str);
> +	vfprintf(stderr, str, args);
> +	fputc('\n', stderr);
> +	exit(1);
> +}
> +
> +int
> +fill_null0(int size)
> +{
> +	unsigned char buf[1];
> +	int i;
> +
> +	fprintf(stderr,"Fill null\n");
> +
> +	buf[0] = 0xff;
> +	for (i=0 ; i< size; i++ )
> +		if (write(fd_w, buf, 1) != 1)
> +			return 0;
> +
> +	return 1;
> +}
> +
> +long
> +file_open(const char *name)
> +{
> +	struct stat sb;
> +	if ((fd = open(name, O_RDONLY, 0)) < 0){
> +		die("Unable to open `%s' : %m", name);
> +	}
> +
> +	if (fstat (fd, &sb))
> +		die("Unable to stat `%s' : %m", name);
> +
> +	return sb.st_size;
> +}
> +
> +void usage(void)
> +{
> +	die("Usage: addfwhdr [-i|--input] sysupgrade.o [-o|--output]
> code.bin\n");
> +}
> +
> +int main(int argc, char ** argv)
> +{
> +	uint input_size,c;
> +	char *input_file=NULL, *output_file=NULL;
> +        int opt;
> +        int option_index=0;
> +	int garbage = 0;
> +	char *buf = NULL;
> +        extern char *optarg;
> +        extern int optind, opterr, optopt;
> +
> +	struct cbt_fw_header *fwhdr;
> +	uint32 crc;
> +
> +        static struct option long_options[] =
> +	{
> +		{"input", 1, 0, 'i'},
> +		{"output", 1, 0, 'o'},
> +		{"garbage", 0, 0, 'g'},
> +		{0, 0, 0, 0}
> +	};
> +
> +	printf("\n---------- add fw header --------\n");
> +
> +        fwhdr  = malloc(sizeof(struct cbt_fw_header));
> +	memset(fwhdr, 0, sizeof(struct cbt_fw_header));
> +
> +	while(1){
> +		opt = getopt_long(argc, argv, "i:o:g",long_options,
> &option_index);
> +		if(opt == -1)
> +			break;
> +		switch(opt){
> +			case 'h' :
> +				usage(); break;
> +			case 'i' :
> +				input_file = optarg;
> +				printf("input file is [%s]\n",input_file); break;
> +			case 'o' :
> +				output_file = optarg;
> +				printf("output file is [%s]\n",output_file);
> break;
> +			case 'g' :
> +				garbage = 1; break;
> +			default :
> +				usage();
> +		}
> +	}
> +
> +	if(!input_file || !output_file)
> +	{
> +		printf("You must specify the input and output file!\n");
> +		usage();
> +	}
> +
> +
> +	unlink(output_file);
> +	if ((fd_w = open(output_file,O_RDWR|O_CREAT, S_IREAD |
> S_IWRITE)) < 0){
> +		die("Unable to open `%s' : %m", output_file);
> +	}
> +
> +	fwhdr = malloc(sizeof(struct cbt_fw_header));
> +	memset(fwhdr, 0, sizeof(struct cbt_fw_header));
> +
> +	memcpy((char *)&fwhdr->magic, FWHDR_MAGIC_STR,
> sizeof(fwhdr->magic));
> +
> +	input_size = file_open(input_file);
> +	if(!(buf = malloc(input_size)))
> +	{
> +		perror("malloc");
> +		goto fail;
> +	}
> +	c = read(fd, buf, input_size);
> +	fwhdr->len = input_size + sizeof(struct cbt_fw_header);
> +
> +	fwhdr->res = fwhdr->res | 0x1;
> +
> +	//junzhao add fw build date in cbt_fw_header for calculate MD5
> +	#if 0
> +	{
> +	       static char *months[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun",
> "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
> +	       int year, day, mon=1;
> +               char temp[10]={0};
> +	       unsigned char *p_date = (unsigned char *)&fwhdr->res;
> +               int j;
> +
> +               sscanf(__DATE__, "%s %d %d", temp, &day, &year);
> +
> +               for(j=0;j<12;j++) {
> +                       if(!strcmp(temp, months[j])) {
> +                               mon = j+1;
> +                               break;
> +                       }
> +               }
> +               p_date[0]= year-2000;
> +               p_date[1]= mon;
> +               p_date[2]= day;
> +
> +	       printf("%s: Build date(20%d-%d-%d)\n", __FUNCTION__,
> p_date[0], p_date[1], p_date[2]);
> +
> +	}
> +	#endif
> +	//end
> +
> +	crc = crc32((uint8 *)&fwhdr->res, 4, CRC32_INIT_VALUE);
> +	crc = crc32((uint8 *)&buf[0], input_size, crc);
> +
> +	fwhdr->crc32 = crc;
> +
> +	/* write code pattern header */
> +	write(fd_w, fwhdr, sizeof(struct cbt_fw_header));
> +
> +	if(write(fd_w, buf, c)!=c)
> +		die("Write call failed!\n");
> +
> +#if 0
> +	if(garbage == 1){			// add garbage, let image is a
> multiple of 1024, and the web upgrade will ok
> +		printf("Add %d bytes garbage\n",1024-32);
> +		if(!fill_null0(1024-32))
> +			die("error!\n");
> +	}
> +#endif
> +fail:
> +	if(buf)
> +		free(buf);
> +	close (fd);
> +	close (fd_w);
> +
> +	return 0;
> +}
> diff --git a/tools/firmware-utils/src/linksys/bcmdefs.h b/tools/firmware-
> utils/src/linksys/bcmdefs.h
> new file mode 100644
> index 0000000000..edd7397892
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/bcmdefs.h
> @@ -0,0 +1,318 @@
> +/*
> + * Misc system wide definitions
> + *
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + *
> + * $Id: bcmdefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
> + */
> +
> +#ifndef	_bcmdefs_h_
> +#define	_bcmdefs_h_
> +
> +/*
> + * One doesn't need to include this file explicitly, gets included automatically
> if
> + * typedefs.h is included.
> + */
> +
> +/* Use BCM_REFERENCE to suppress warnings about intentionally-unused
> function
> + * arguments or local variables.
> + */
> +#define BCM_REFERENCE(data)	((void)data)
> +
> +/* Reclaiming text and data :
> + * The following macros specify special linker sections that can be reclaimed
> + * after a system is considered 'up'.
> + * BCMATTACHFN is also used for detach functions (it's not worth having a
> BCMDETACHFN,
> + * as in most cases, the attach function calls the detach function to clean up
> on error).
> + */
> +#ifdef DONGLEBUILD
> +
> +extern bool bcmreclaimed;
> +
> +#define BCMATTACHDATA(_data)	__attribute__ ((__section__
> (".dataini2." #_data))) _data
> +#define BCMATTACHFN(_fn)	__attribute__ ((__section__ (".textini2."
> #_fn))) _fn
> +
> +#define BCMPREATTACHDATA(_data)	__attribute__ ((__section__
> (".dataini2." #_data))) _data
> +#define BCMPREATTACHFN(_fn)	__attribute__ ((__section__
> (".textini2." #_fn))) _fn
> +
> +#if defined(BCMRECLAIM)
> +#define BCMINITDATA(_data)	__attribute__ ((__section__
> (".dataini1." #_data))) _data
> +#define BCMINITFN(_fn)		__attribute__ ((__section__
> (".textini1." #_fn))) _fn
> +#define CONST
> +#else
> +#define BCMINITDATA(_data)	_data
> +#define BCMINITFN(_fn)		_fn
> +#define CONST	const
> +#endif
> +
> +/* Non-manufacture or internal attach function/dat */
> +#if !defined(WLTEST)
> +#define	BCMNMIATTACHFN(_fn)	BCMATTACHFN(_fn)
> +#define	BCMNMIATTACHDATA(_data)	BCMATTACHDATA(_data)
> +#else
> +#define	BCMNMIATTACHFN(_fn)	_fn
> +#define	BCMNMIATTACHDATA(_data)	_data
> +#endif
> +
> +#define BCMUNINITFN(_fn)	_fn
> +
> +#define BCMFASTPATH
> +
> +#else /* DONGLEBUILD */
> +
> +#define bcmreclaimed 		0
> +#define BCMATTACHDATA(_data)	_data
> +#define BCMATTACHFN(_fn)	_fn
> +#define BCMPREATTACHDATA(_data)	_data
> +#define BCMPREATTACHFN(_fn)	_fn
> +#define BCMINITDATA(_data)	_data
> +#define BCMINITFN(_fn)		_fn
> +#define BCMUNINITFN(_fn)	_fn
> +#define	BCMNMIATTACHFN(_fn)	_fn
> +#define	BCMNMIATTACHDATA(_data)	_data
> +#define CONST	const
> +#ifdef mips
> +#define BCMFASTPATH		__attribute__
> ((__section__(".text.fastpath")))
> +#else
> +#define BCMFASTPATH
> +#endif
> +
> +#endif /* DONGLEBUILD */
> +
> +#if defined(BCMROMOFFLOAD) || defined(BCMROMBUILD)
> +typedef struct {
> +	uint16 esiz;
> +	uint16 cnt;
> +	void *addr;
> +} bcmromdat_patch_t;
> +#endif
> +
> +/* Put some library data/code into ROM to reduce RAM requirements */
> +#if defined(BCMROMOFFLOAD)
> +#define BCMROMDATA(_data)	__attribute__ ((weak, __section__
> (".datarom."#_data))) _data
> +#define BCMROMDAT_NAME(_data)	_data
> +#define BCMROMFN(_fn)		__attribute__ ((weak, long_call,
> __section__ (".textrom."#_fn))) _fn
> +#define BCMROMDAT_ARYSIZ(data)	ARRAYSIZE(data)
> +#define BCMROMDAT_SIZEOF(data)	sizeof(data)
> +#define BCMROMDAT_APATCH(data) \
> +	const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
> +	{ sizeof(data[0]), sizeof(data)/sizeof(data[0]), ((void*)data) };
> +#define BCMROMDAT_SPATCH(data) \
> +	const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
> +	{ sizeof(data), 1, ((void*)&data) };
> +#define BCMROMFN_NAME(_fn)	_fn
> +#define STATIC
> +#elif defined(BCMROMBUILD)
> +#include <bcmjmptbl.h>
> +#define STATIC
> +#else /* !BCMROMBUILD */
> +#define BCMROMDATA(_data)	_data
> +#define BCMROMDAT_NAME(_data)	_data
> +#define BCMROMFN(_fn)		_fn
> +#define BCMROMFN_NAME(_fn)	_fn
> +#define STATIC	static
> +#define BCMROMDAT_ARYSIZ(data)	ARRAYSIZE(data)
> +#define BCMROMDAT_SIZEOF(data)	sizeof(data)
> +#define BCMROMDAT_APATCH(data)
> +#define BCMROMDAT_SPATCH(data)
> +#endif /* !BCMROMBUILD */
> +
> +/* Bus types */
> +#define	SI_BUS			0	/* SOC Interconnect */
> +#define	PCI_BUS			1	/* PCI target */
> +#define	PCMCIA_BUS		2	/* PCMCIA target */
> +#define SDIO_BUS		3	/* SDIO target */
> +#define JTAG_BUS		4	/* JTAG */
> +#define USB_BUS			5	/* USB (does not support R/W
> REG) */
> +#define SPI_BUS			6	/* gSPI target */
> +#define RPC_BUS			7	/* RPC target */
> +
> +/* Allows size optimization for single-bus image */
> +#ifdef BCMBUSTYPE
> +#define BUSTYPE(bus) 	(BCMBUSTYPE)
> +#else
> +#define BUSTYPE(bus) 	(bus)
> +#endif
> +
> +/* Allows size optimization for single-backplane image */
> +#ifdef BCMCHIPTYPE
> +#define CHIPTYPE(bus) 	(BCMCHIPTYPE)
> +#else
> +#define CHIPTYPE(bus) 	(bus)
> +#endif
> +
> +
> +/* Allows size optimization for SPROM support */
> +#if defined(BCMSPROMBUS)
> +#define SPROMBUS	(BCMSPROMBUS)
> +#elif defined(SI_PCMCIA_SROM)
> +#define SPROMBUS	(PCMCIA_BUS)
> +#else
> +#define SPROMBUS	(PCI_BUS)
> +#endif
> +
> +/* Allows size optimization for single-chip image */
> +#ifdef BCMCHIPID
> +#define CHIPID(chip)	(BCMCHIPID)
> +#else
> +#define CHIPID(chip)	(chip)
> +#endif
> +
> +#ifdef BCMCHIPREV
> +#define CHIPREV(rev)	(BCMCHIPREV)
> +#else
> +#define CHIPREV(rev)	(rev)
> +#endif
> +
> +/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
> +#define DMADDR_MASK_32 0x0		/* Address mask for 32-bits */
> +#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
> +#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-
> part) */
> +
> +#define	DMADDRWIDTH_30  30 /* 30-bit addressing capability */
> +#define	DMADDRWIDTH_32  32 /* 32-bit addressing capability */
> +#define	DMADDRWIDTH_63  63 /* 64-bit addressing capability */
> +#define	DMADDRWIDTH_64  64 /* 64-bit addressing capability */
> +
> +#ifdef BCMDMA64OSL
> +typedef struct {
> +	uint32 loaddr;
> +	uint32 hiaddr;
> +} dma64addr_t;
> +
> +typedef dma64addr_t dmaaddr_t;
> +#define PHYSADDRHI(_pa) ((_pa).hiaddr)
> +#define PHYSADDRHISET(_pa, _val) \
> +	do { \
> +		(_pa).hiaddr = (_val);		\
> +	} while (0)
> +#define PHYSADDRLO(_pa) ((_pa).loaddr)
> +#define PHYSADDRLOSET(_pa, _val) \
> +	do { \
> +		(_pa).loaddr = (_val);		\
> +	} while (0)
> +
> +#else
> +typedef unsigned long dmaaddr_t;
> +#define PHYSADDRHI(_pa) (0)
> +#define PHYSADDRHISET(_pa, _val)
> +#define PHYSADDRLO(_pa) ((_pa))
> +#define PHYSADDRLOSET(_pa, _val) \
> +	do { \
> +		(_pa) = (_val);			\
> +	} while (0)
> +#endif /* BCMDMA64OSL */
> +
> +/* One physical DMA segment */
> +typedef struct  {
> +	dmaaddr_t addr;
> +	uint32	  length;
> +} hnddma_seg_t;
> +
> +#if defined(MACOSX)
> +/* In MacOS, the OS API may return large number of segments. Setting this
> number lower
> + * will result in failure of dma map
> + */
> +#define MAX_DMA_SEGS 8
> +#else
> +#define MAX_DMA_SEGS 4
> +#endif
> +
> +
> +typedef struct {
> +	void *oshdmah; /* Opaque handle for OSL to store its information */
> +	uint origsize; /* Size of the virtual packet */
> +	uint nsegs;
> +	hnddma_seg_t segs[MAX_DMA_SEGS];
> +} hnddma_seg_map_t;
> +
> +
> +/* packet headroom necessary to accommodate the largest header in the
> system, (i.e TXOFF).
> + * By doing, we avoid the need  to allocate an extra buffer for the header
> when bridging to WL.
> + * There is a compile time check in wlc.c which ensure that this value is at
> least as big
> + * as TXOFF. This value is used in dma_rxfill (hnddma.c).
> + */
> +
> +#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY)
> +/* add 40 bytes to allow for extra RPC header and info  */
> +#define BCMEXTRAHDROOM 220
> +#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
> +#ifdef CTFMAP
> +#define BCMEXTRAHDROOM 176
> +#else /* CTFMAP */
> +#define BCMEXTRAHDROOM 172
> +#endif /* CTFMAP */
> +#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
> +
> +/* Headroom required for dongle-to-host communication.  Packets
> allocated
> + * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
> + * leave this much room in front for low-level message headers which may
> + * be needed to get across the dongle bus to the host.  (These messages
> + * don't go over the network, so room for the full WL header above would
> + * be a waste.).
> + */
> +#ifdef BCMUSBDEV
> +#define BCMDONGLEHDRSZ 0
> +#define BCMDONGLEPADSZ 0
> +#else
> +#define BCMDONGLEHDRSZ 12
> +#define BCMDONGLEPADSZ 16
> +#endif
> +
> +#define BCMDONGLEOVERHEAD	(BCMDONGLEHDRSZ +
> BCMDONGLEPADSZ)
> +
> +#ifdef BCMDBG
> +
> +#ifndef BCMDBG_ERR
> +#define BCMDBG_ERR
> +#endif /* BCMDBG_ERR */
> +
> +#ifndef BCMDBG_ASSERT
> +#define BCMDBG_ASSERT
> +#endif /* BCMDBG_ASSERT */
> +
> +#endif /* BCMDBG */
> +
> +#if defined(BCMDBG_ASSERT) || defined(BCMASSERT_LOG)
> +#define BCMASSERT_SUPPORT
> +#endif /* BCMDBG_ASSERT || BCMASSERT_LOG */
> +
> +/* Macros for doing definition and get/set of bitfields
> + * Usage example, e.g. a three-bit field (bits 4-6):
> + *    #define <NAME>_M	BITFIELD_MASK(3)
> + *    #define <NAME>_S	4
> + * ...
> + *    regval = R_REG(osh, &regs->regfoo);
> + *    field = GFIELD(regval, <NAME>);
> + *    regval = SFIELD(regval, <NAME>, 1);
> + *    W_REG(osh, &regs->regfoo, regval);
> + */
> +#define BITFIELD_MASK(width) \
> +		(((unsigned)1 << (width)) - 1)
> +#define GFIELD(val, field) \
> +		(((val) >> field ## _S) & field ## _M)
> +#define SFIELD(val, field, bits) \
> +		(((val) & (~(field ## _M << field ## _S))) | \
> +		 ((unsigned)(bits) << field ## _S))
> +
> +/* define BCMSMALL to remove misc features for memory-constrained
> environments */
> +#ifdef BCMSMALL
> +#undef	BCMSPACE
> +#define bcmspace	FALSE	/* if (bcmspace) code is discarded */
> +#else
> +#define	BCMSPACE
> +#define bcmspace	TRUE	/* if (bcmspace) code is retained */
> +#endif
> +
> +/* Max. nvram variable table size */
> +#define	MAXSZ_NVRAM_VARS	4096
> +
> +#define LOCATOR_EXTERN static
> +
> +#endif /* _bcmdefs_h_ */
> diff --git a/tools/firmware-utils/src/linksys/code_pattern.h
> b/tools/firmware-utils/src/linksys/code_pattern.h
> new file mode 100644
> index 0000000000..0bbaa1102d
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/code_pattern.h
> @@ -0,0 +1,396 @@
> +#ifndef _CODE_PATTERN_H_
> +#define _CODE_PATTERN_H_
> +
> +#define CODE_ID		"U2ND"
> +#define BOOT_PATTERN	"EST"
> +#define UP_PMON		1
> +#define UP_MAC		2
> +#define UP_CODE		3
> +#define UP_PIGGY	4
> +#define UP_EOU_KEY	5
> +#define UP_SN		6
> +#define UP_LANG		7
> +#define UP_T_CERT	8
> +#define CMP_T_CERT	9	//for factory test.
> +#define UP_CODE2       10
> +#define UP_FULL_WL     11
> +#define UP_WSC_PIN     12
> +#define UP_COUNTRY     13
> +#define UP_QUAN_BOOT   14
> +#define UP_QUAN_IMAGE   15
> +
> +#define LINKSYS		7
> +#define PCI_OEM		9	// <remove the line>
> +#define ELSA		10	// <remove the line>
> +#define ALLNET		11	// <remove the line>
> +#define REENET		12	// 2003/06/21	<remove the line>
> +#define CISCO		90
> +#define	OTHER_OEM	99	// <remove the line>
> +
> +#define ENGLISH 	1
> +#define JAPANESE	2
> +#define GERMAN		3
> +#define FRENCH		4
> +#define KOREAN		5
> +
> +#define	USA		1
> +#define	JAPAN		2
> +#define	EUROPE		3
> +#define WW		4
> +#define GERMANY		5
> +#define	KOREA		6
> +#define	FRANCE		7
> +
> +#define	WRT54G		1
> +#define	WRT54GS		2
> +#define	WRT54V5		3
> +#define	DPN		4
> +#define	RTA41		5
> +#define	WRT54G3G	6
> +#define	T_MOBILE 	7
> +#define WRT300N		8
> +#define WRT54GL         9
> +#define WRT54GSV4       10
> +#define WRT350N		11
> +#define WRT610N		12
> +#define WRT61XN		13
> +#define E200		14
> +#define E300		15
> +//John
> +#define WRT54GV5        16
> +
> +#define E3200		17
> +#define E4200		18
> +#define E2500		19
> +#define AC2350		20
> +
> +
> +#define CES_M_SERIAL	1
> +#define CES_E_SERIAL	2
> +
> +/***************************************
> + * define OEM                          *
> + * Don't edit, auto edit by select.sh  *
> + ***************************************/
> +#define OEM LINKSYS //LINKSYS
> +//#define OEM PCI_OEM //PCI_OEM
> +//#define OEM ELSA //ELSA
> +//#define OEM ALLNET //ALLNET
> +//#define OEM REENET //REENET
> +//#define OEM OTHER_OEM //OTHER_OEM
> +
> +/***************************************
> + * define MODEL NAME                          *
> + * Don't edit, auto edit by select.sh  *
> + ***************************************/
> +
> +//#define LINKSYS_MODEL E3200 //E3200
> +//#define LINKSYS_MODEL E300 //E300
> +//#define LINKSYS_MODEL E200 //E200
> +//#define LINKSYS_MODEL E4200 //E4200
> +//#define LINKSYS_MODEL E2500 //E2500
> +#define LINKSYS_MODEL AC2350 //AC2350
> +
> +/***************************************
> + * define MODEL SERIAL                          *
> + * Don't edit, auto edit by select.sh  *
> + ***************************************/
> +//#define LINKSYS_MODEL_SERIAL CES_M_SERIAL //CES_M_SERIAL
> +#define LINKSYS_MODEL_SERIAL CES_E_SERIAL //CES_E_SERIAL
> +
> +/***************************************
> + * define country                      *
> + * LOCALE=COUNTRY =                    *
> + ***************************************/
> +#define COUNTRY		LOCALE
> +#define LOCALE USA
> +//#define LOCALE JAPAN
> +//#define LOCALE EUROPE
> +//#define LOCALE WW
> +//#define LOCALE GERMANY
> +//#define LOCALE FRANCE
> +//#define LOCALE KOREA
> +//#define LOCALE UK
> +
> +/***************************************
> + * define model name and code pattern  *
> + * MODEL_NAME =                        *
> + * CODE_PATTERN =                      *
> + ***************************************/
> +#if OEM == LINKSYS
> +	#define	CT_VENDOR		"LINKSYS"
> +	#define UI_STYLE	CISCO
> +
> +	#if LINKSYS_MODEL == WRT54GS
> +		#define CODE_PATTERN   "W54S"
> +		#if LOCALE == GERMANY
> +			#define MODEL_NAME	"WRT54GS-DE"
> +			#define MODEL_VERSION	""
> +		#elif LOCALE == FRANCE
> +			#define MODEL_NAME	"WRT54GS-FR"
> +			#define MODEL_VERSION	""
> +		#elif LOCALE == JAPAN
> +			#define MODEL_NAME	"WRT54GS-JP"
> +			#define MODEL_VERSION	""
> +		#else
> +			#define MODEL_NAME	"WRT54GS"
> +			#define MODEL_VERSION	"V3.0"
> +		#endif
> +	#elif LINKSYS_MODEL == WRT54GSV4
> +		#define CODE_PATTERN   "W54s"
> +		#define MODEL_NAME     "WRT54GSV4"
> +		#define MODEL_VERSION  ""
> +	#elif LINKSYS_MODEL == DPN  //DPN
> +		#define CODE_PATTERN   "WDPN"
> +		#define MODEL_NAME     "DPN"
> +		#define MODEL_VERSION	""
> +	#elif LINKSYS_MODEL == WRT54GV5
> +		#define CODE_PATTERN   "W54V"
> +		#define MODEL_NAME     "WRTA54G"
> +		#define MODEL_VERSION	""
> +	#elif LINKSYS_MODEL == RTA41
> +		#define CODE_PATTERN   "W54N"
> +		#define MODEL_NAME     "RTA41"
> +		#define MODEL_VERSION	""
> +	#elif LINKSYS_MODEL == WRT54G3G
> +		#define CODE_PATTERN   "W54F"
> +		#if LOCALE == EUROPE
> +			#define MODEL_NAME     "WRT54G3G-EU"
> +			#define MODEL_VERSION	""
> +		#elif LOCALE == UK
> +			#define MODEL_NAME     "WRT54G3G-UK"
> +			#define MODEL_VERSION	""
> +		#else
> +			#define MODEL_NAME     "WRT54G3G"
> +			#define MODEL_VERSION	"V1"
> +		#endif
> +	#elif LINKSYS_MODEL == T_MOBILE
> +		#define CODE_PATTERN   "W54T"
> +		#define MODEL_NAME     "WRT54G-TM"
> +		#define MODEL_VERSION	"V3.0"
> +	#elif LINKSYS_MODEL == WRT300N
> +		#define CODE_PATTERN   "EWCB"
> +		#define MODEL_NAME     "WRT300N"
> +		#define MODEL_VERSION	"V1.0"
> +	#elif LINKSYS_MODEL == WRT350N
> +		#define CODE_PATTERN   "EWCG"
> +		#define MODEL_NAME     "WRT350N"
> +		#define MODEL_VERSION	"V1.0"
> +	#elif LINKSYS_MODEL == WRT54G
> +		#define CODE_PATTERN   "W54G"
> +		#if LOCALE == GERMANY
> +			#define MODEL_NAME	"WRT54G-DE"
> +			#define MODEL_VERSION	""
> +		#elif LOCALE == FRANCE
> +			#define MODEL_NAME	"WRT54G-FR"
> +			#define MODEL_VERSION	""
> +		#elif LOCALE == JAPAN
> +			#define MODEL_NAME	"WRT54G-JP"
> +			#define MODEL_VERSION	""
> +		#else
> +			#define MODEL_NAME	"WRT54G"
> +			#define MODEL_VERSION	"V4.0"
> +		#endif
> +	#elif LINKSYS_MODEL == WRT54GL
> +		#define CODE_PATTERN   "W54G"
> +		#define MODEL_NAME	"WRT54GL"
> +		#define MODEL_VERSION	"V1"
> +	#elif LINKSYS_MODEL == WRT610N
> +		#define CODE_PATTERN   "610N"
> +		#define MODEL_NAME	"WRT610N"
> +		#define MODEL_VERSION	"V2"              //V1 or V2
> +	#elif LINKSYS_MODEL == E200
> +		#define CODE_PATTERN   "32XN"
> +		#define MODEL_NUMBER	"E2000"
> +		#define MODEL_NAME	"Linksys E2000"
> +		#define MODEL_VERSION	"V1.0"
> +	#elif LINKSYS_MODEL == E300
> +		#define CODE_PATTERN   "61XN"
> +		#define MODEL_NUMBER	"E3000"	    //model
> number added by Jemmy 2009.11.17
> +		#define MODEL_NAME	"Linksys E3000"
> +		#define MODEL_VERSION	"V1"              //V1 or V2
> +	#elif LINKSYS_MODEL == E3200
> +		#define CODE_PATTERN   "3200"
> +		#define MODEL_NUMBER	"E3200"	    //model
> number added by zhaoguang 2010.10.25
> +		#define MODEL_NAME	"Linksys E3200"
> +		#define MODEL_VERSION	"V1"
> +	#elif LINKSYS_MODEL == E4200
> +		#define CODE_PATTERN   "4200"
> +		#define MODEL_NUMBER	"E4200"	    //model
> number added by Jemmy 2009.11.17
> +		#define MODEL_NAME	"Linksys E4200"
> +		#define MODEL_VERSION	"V1"              //V1 or V2
> +	#elif (LINKSYS_MODEL == E2500)
> +		#define CODE_PATTERN   "25V3"
> +		#define MODEL_NUMBER	"E2500"	    //model
> number
> +		#define MODEL_NAME	"Linksys E2500"
> +		#define MODEL_VERSION	"V3"              //V1 or V2
> +	#elif (LINKSYS_MODEL == AC2350)
> +		#define CODE_PATTERN   "8350"
> +		#define MODEL_NUMBER	"E8350"	    //model
> number
> +		#define MODEL_NAME	"Linksys E8350"
> +		#define MODEL_VERSION	"V1"              //V1 or V2
> +
> +	#else
> +		#error "You must select a LINKSYS_MODEL!!"
> +	#endif
> +
> +	#if LINKSYS_MODEL == WRT54G || LINKSYS_MODEL == WRT54GL
> +		#define INTEL_FLASH_SUPPORT_VERSION_FROM "v1.41.8"
> +		#define BCM4712_CHIP_SUPPORT_VERSION_FROM
> "v1.50.0"
> +		#define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM
> "v1.3"
> +		#define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM
> "v2.0"
> +	#else
> +		#define INTEL_FLASH_SUPPORT_VERSION_FROM "v0.00.0"
> +		#define BCM4712_CHIP_SUPPORT_VERSION_FROM
> "v0.00.0"
> +		#define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM
> "v0.0"
> +		#define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM
> "v0.0"
> +	#endif
> +	#if	LINKSYS_MODEL == WRT350N
> +		#define WRT350N_SUPPORT_VERSION_FROM "v0.85.3"
> 
> +	#endif
> +
> +#elif OEM == PCI_OEM
> +	#define CODE_PATTERN    "W54P"
> +	#if LOCALE == JAPAN
> +		#define MODEL_NAME	"Planex BLW-04G Wireless
> Router"
> +	#else
> +		#define MODEL_NAME	"Advanced Wireless 11g
> Router"
> +	#endif
> +	#define	CT_VENDOR		"PCI"
> +#elif OEM == ELSA
> +	#define CODE_PATTERN    "W54E"
> +	#define MODEL_NAME	"ELSA WLAN DSL-Router 4P G"
> +	#define	CT_VENDOR	"ELSA"
> +#elif OEM == ALLNET
> +	#define CODE_PATTERN    "W54A"
> +	#define MODEL_NAME	"Advanced Wireless 11g Router"
> +	#define	CT_VENDOR	"ALLNET"
> +#elif OEM == REENET
> +	#define CODE_PATTERN    "W54R"
> +	#define MODEL_NAME	"RW-IPG500"
> +	#define	CT_VENDOR	"REENET"
> +#elif OEM == OTHER_OEM
> +	#define CODE_PATTERN    "W54O"
> +	#define MODEL_NAME	"Advanced Wireless 11g Router"
> +	#define	CT_VENDOR	"OTHER_OEM"
> +#else
> +	#error "Your must select a OEM name!!"
> +#endif
> +
> +/***************************************
> + * define language                     *
> + * LANGUAGE =                          *
> + * LANG_SEL=EN                         *
> + * HTTP_CHARSET =		       *
> + ***************************************/
> +#if LOCALE == JAPAN
> +	#define	LANGUAGE	JAPANESE
> +	#define	HTTP_CHARSET	"shift-jis"
> +#elif LOCALE == GERMANY
> +	#define LANGUAGE	GERMAN
> +	#define	HTTP_CHARSET	"iso-8859-1"
> +#elif LOCALE == FRANCE
> +	#define LANGUAGE	FRENCH
> +	#define	HTTP_CHARSET	"iso-8859-1"
> +#elif LOCALE == KOREA
> +	#define LANGUAGE 	KOREAN
> +	#define	HTTP_CHARSET	"euc-kr"
> +#else
> +	#define LANGUAGE 	ENGLISH
> +	#define	HTTP_CHARSET	"iso-8859-1"
> +#endif
> +
> +/***************************************
> + * define wireless max channel         *
> + * WL_MAX_CHANNEL =                    *
> + ***************************************/
> +#if LOCALE == JAPAN || LOCALE == EUROPE || LOCALE == GERMANY ||
> LOCALE == FRANCE
> +	#define	WL_MAX_CHANNEL	"13"
> +#elif OEM == KOREA			// <remove the line>
> +	#define	WL_MAX_CHANNEL	"13"	// <remove the line>
> +#else
> +	#define WL_MAX_CHANNEL	"11"
> +#endif
> +
> +/***************************************
> + * define web file path                *
> + * WEB_PAGE =                          *
> + ***************************************/
> +#if OEM == LINKSYS
> +#if UI_STYLE ==  CISCO
> +	#if LOCALE == JAPAN
> +		#define	WEB_PAGE	"cisco_wrt54g_jp"
> +	#elif LOCALE == GERMANY
> +		#define	WEB_PAGE	"cisco_wrt54g_de"
> +	#elif LOCALE == FRANCE
> +		#define	WEB_PAGE	"cisco_wrt54g_fr"
> +	#else
> +		#if LINKSYS_MODEL == E200
> +			#define WEB_PAGE        "ces_m"
> +		#elif LINKSYS_MODEL == E300
> +			#define WEB_PAGE        "ces_m"
> +		#elif LINKSYS_MODEL == E3200
> +			#define WEB_PAGE        "e3200_m"
> +		#elif LINKSYS_MODEL == E4200
> +			#define WEB_PAGE        "e4200_m"
> +		#elif (LINKSYS_MODEL == E2500)
> +			#define WEB_PAGE        "e2500_m"
> +		#elif (LINKSYS_MODEL == AC2350)
> +			#define WEB_PAGE        "ac2350_m"
> +		#else
> +			#define WEB_PAGE	"cisco_wrt54g_m"
> +		#endif
> +	#endif
> +#else
> +	#if LOCALE == JAPAN
> +		#define	WEB_PAGE	"linksys_wrt54g_jp"
> +	#else
> +		#define WEB_PAGE	"linksys_wrt54g_en"
> +	#endif
> +#endif
> +#elif OEM == PCI_OEM
> +	#if LOCALE == JAPAN
> +		#define	WEB_PAGE	"pci_wrt54g_jp"
> +	#else
> +		#define WEB_PAGE	"pci_wrt54g_en"
> +	#endif
> +#elif OEM == ELSA
> +	#define WEB_PAGE	"elsa_wrt54g_en"
> +#elif OEM == ALLNET
> +	#define WEB_PAGE	"nonbrand"
> +#elif OEM == REENET
> +	#define WEB_PAGE	"reenet_wrt54g_kr"
> +#elif	OEM == OTHER_OEM
> +	#define WEB_PAGE	"nonbrand"
> +#endif
> +
> +/***************************************
> + * check LOCALE
> + ***************************************/
> +#if OEM == LINKSYS
> + #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE && LOCALE
> != GERMANY && LOCALE != FRANCE
> +	#error	"The LOCALE for LINKSYS is error, must be USA, EUROPE,
> JAPAN, GERMANY or FRANCE"
> + #endif
> +#elif OEM == PCI_OEM
> + #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE
> +	#error	"The LOCALE for PCI is error, must be USA or JAPAN"
> + #endif
> +#elif OEM == ELSA
> + #if LOCALE != EUROPE
> +	#error	"The LOCALE for ELSA is error, must be EUROPE"
> + #endif
> +#elif OEM == ALLNET
> + #if LOCALE != EUROPE
> +	#error	"The LOCALE for ALLNET is error, must be EUROPE"
> + #endif
> +#elif OEM == REENET
> + #if LOCALE != KOREA
> +	#error	"The LOCALE for REENET is error, must be KOREA"
> + #endif
> +#elif OEM == OTHER_OEM
> + #if LOCALE != USA && LOCALE != EUROPE
> +	#error	"The LOCALE for NONBRAND is error, must be USA or
> EUROPE"
> + #endif
> +#endif
> +
> +#endif
> diff --git a/tools/firmware-utils/src/linksys/crc.c b/tools/firmware-
> utils/src/linksys/crc.c
> new file mode 100644
> index 0000000000..7d3e641df9
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/crc.c
> @@ -0,0 +1,290 @@
> +/*********************************************************
> **********************
> + * $Id: crc.c,v 1.1.1.1 2010/11/24 06:37:40 gavin.ke Exp $
> + * Copyright 2007, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * crc.c: utility function to compute various CRCs
> +
> **********************************************************
> ********************/
> +
> +#include "typedefs.h"
> +#include "crc.h"
> +
> +/*********************************************************
> **********************
> + * hcs
> + *
> + * Computes and inserts a header check sum based on crc8 polynomial
> + * below.  Unlike a typical crc, the header check sum is inserted 13
> + * bytes from the end of the byte stream (rather than appended to the
> + * end of the byte stream) such that at the receiver a normal checksum
> + * computation over all of the bytes results in a known good value.
> + * Given a constant 12 bytes after the header checksum to the end of
> + * the header, a lookup table can be used to provide the actual value
> + * inserted.
> +
> **********************************************************
> ********************/
> +
> +static uint8 hcs_table[8] = { 0x16, 0x2c, 0x58, 0xb0, 0x37, 0x6e, 0xdc, 0xef};
> +
> +void
> +hcs(
> +    uint8 *pheader, /* pointer to array of data to process */
> +    uint nbytes   /* number of input data bytes to process */
> +)
> +{
> +    uint8 hcs0, hcs1;
> +    int i;
> +
> +    /* run once with zeros in hcs position, 13th byte from the end */
> +    pheader[nbytes - 12 - 1] = 0;
> +    hcs0 = crc8(pheader, nbytes, CRC8_INIT_VALUE);
> +
> +    /* now compute real hcs to insert in place of zeros */
> +    hcs1 = 0;
> +    for (i = 0; i < 8; i++) {
> +        hcs1 ^= ((hcs0 & (1 << i)) != 0 ? hcs_table[i] : 0);
> +    }
> +    pheader[nbytes - 12 - 1] = hcs1 ^ 0xff;
> +    return;
> +}
> +
> +/*********************************************************
> **********************
> + * crc8
> + *
> + * Computes a crc8 over the input data using the polynomial:
> + *
> + *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
> + *
> + * The caller provides the initial value (either CRC8_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data.  When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream.  When checking, a final
> + * return value of CRC8_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint8 crc8_table[256] = {
> +    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
> +    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
> +    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
> +    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
> +    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
> +    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
> +    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
> +    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
> +    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
> +    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
> +    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
> +    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
> +    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
> +    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
> +    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
> +    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
> +    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
> +    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
> +    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
> +    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
> +    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
> +    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
> +    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
> +    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
> +    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
> +    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
> +    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
> +    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
> +    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
> +    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
> +    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
> +    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
> +};
> +
> +#define CRC_INNER_LOOP(n, c, x) \
> +    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
> +
> +uint8
> +crc8(
> +    uint8 *pdata,  /* pointer to array of data to process */
> +    uint nbytes, /* number of input data bytes to process */
> +    uint8 crc      /* either CRC8_INIT_VALUE or previous return value */
> +)
> +{
> +    while (nbytes-- > 0)
> +        CRC_INNER_LOOP(8, crc, *pdata++);
> +    return crc;
> +}
> +
> +/*********************************************************
> **********************
> + * crc16
> + *
> + * Computes a crc16 over the input data using the polynomial:
> + *
> + *       x^16 + x^12 +x^5 + 1
> + *
> + * The caller provides the initial value (either CRC16_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data.  When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream.  When checking, a final
> + * return value of CRC16_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint16 crc16_table[256] = {
> +    0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
> +    0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
> +    0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
> +    0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
> +    0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
> +    0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
> +    0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
> +    0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
> +    0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
> +    0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
> +    0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
> +    0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
> +    0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
> +    0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
> +    0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
> +    0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
> +    0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
> +    0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
> +    0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
> +    0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
> +    0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
> +    0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
> +    0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
> +    0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
> +    0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
> +    0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
> +    0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
> +    0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
> +    0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
> +    0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
> +    0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
> +    0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
> +};
> +
> +uint16
> +crc16(
> +    uint8 *pdata,  /* pointer to array of data to process */
> +    uint nbytes, /* number of input data bytes to process */
> +    uint16 crc     /* either CRC16_INIT_VALUE or previous return value */
> +)
> +{
> +    while (nbytes-- > 0)
> +        CRC_INNER_LOOP(16, crc, *pdata++);
> +    return crc;
> +}
> +
> +/*********************************************************
> **********************
> + * crc32
> + *
> + * Computes a crc32 over the input data using the polynomial:
> + *
> + *
> x^32+x^26+x^23+x^22+x^16+x^12+x^11+X^10+x^8+x^7+x^5+x^4+x^2+x+1
> + *
> + * The caller provides the initial value (either CRC32_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data.  When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream.  When checking, a final
> + * return value of CRC32_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint32 crc32_table[256] = {
> +    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
> +    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
> +    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
> +    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
> +    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
> +    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
> +    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
> +    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
> +    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
> +    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
> +    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
> +    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
> +    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
> +    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
> +    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
> +    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
> +    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
> +    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
> +    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
> +    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
> +    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
> +    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
> +    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
> +    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
> +    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
> +    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
> +    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
> +    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
> +    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
> +    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
> +    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
> +    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
> +    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
> +    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
> +    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
> +    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
> +    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
> +    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
> +    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
> +    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
> +    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
> +    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
> +    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
> +    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
> +    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
> +    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
> +    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
> +    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
> +    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
> +    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
> +    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
> +    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
> +    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
> +    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
> +    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
> +    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
> +    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
> +    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
> +    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
> +    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
> +    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
> +    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
> +    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
> +    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
> +};
> +
> +uint32
> +crc32(
> +    uint8 *pdata,  /* pointer to array of data to process */
> +    uint nbytes, /* number of input data bytes to process */
> +    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
> +)
> +{
> +    while (nbytes-- > 0)
> +        CRC_INNER_LOOP(32, crc, *pdata++);
> +    return crc;
> +}
> diff --git a/tools/firmware-utils/src/linksys/crc.h b/tools/firmware-
> utils/src/linksys/crc.h
> new file mode 100644
> index 0000000000..c7e783c159
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/crc.h
> @@ -0,0 +1,69 @@
> +/*********************************************************
> **********************
> + * $Id: crc.h,v 1.2 2010/12/22 05:14:42 gavin.ke Exp $
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * crc.h - a function to compute crc for iLine10 headers
> +
> **********************************************************
> ********************/
> +
> +#ifndef _RTS_CRC_H_
> +#define _RTS_CRC_H_ 1
> +
> +#include "typedefs.h"
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +
> +#define CRC8_INIT_VALUE  0xff       /* Initial CRC8 checksum value */
> +#define CRC8_GOOD_VALUE  0x9f       /* Good final CRC8 checksum value */
> +#define HCS_GOOD_VALUE   0x39       /* Good final header checksum value
> */
> +
> +#define CRC16_INIT_VALUE 0xffff     /* Initial CRC16 checksum value */
> +#define CRC16_GOOD_VALUE 0xf0b8     /* Good final CRC16 checksum
> value */
> +
> +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
> +#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum
> value */
> +
> +void   hcs(uint8 *, uint);
> +uint8  crc8(uint8 *, uint, uint8);
> +uint16 crc16(uint8 *, uint, uint16);
> +uint32 crc32(uint8 *, uint, uint32);
> +
> +/* macros for common usage */
> +
> +#define APPEND_CRC8(pbytes, nbytes)                           \
> +do {                                                          \
> +    uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
> +    (pbytes)[(nbytes)] = tmp;                                 \
> +    (nbytes) += 1;                                            \
> +} while (0)
> +
> +#define APPEND_CRC16(pbytes, nbytes)                               \
> +do {                                                               \
> +    uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
> +    (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff;                    \
> +    (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff;                    \
> +    (nbytes) += 2;                                                 \
> +} while (0)
> +
> +#define APPEND_CRC32(pbytes, nbytes)                                   \
> +do {                                                                   \
> +    uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
> +    (pbytes)[(nbytes) + 0] = (tmp >>  0) & 0xff;                       \
> +    (pbytes)[(nbytes) + 1] = (tmp >>  8) & 0xff;                       \
> +    (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff;                       \
> +    (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff;                       \
> +    (nbytes) += 4;                                                     \
> +} while (0)
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTS_CRC_H_ */
> diff --git a/tools/firmware-utils/src/linksys/cyutils.h b/tools/firmware-
> utils/src/linksys/cyutils.h
> new file mode 100644
> index 0000000000..fd77ab52f3
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/cyutils.h
> @@ -0,0 +1,348 @@
> +#include "code_pattern.h"
> +
> +#if LINKSYS_MODEL == WRT54GSV4
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v1.05.6"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v1.05.8"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #endif
> +#elif LINKSYS_MODEL == WRT54GS	// WRT54GSV1-3
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v4.70.8"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v4.71.0"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #endif
> +#elif LINKSYS_MODEL == WRT54GL
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v4.30.2"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v4.30.4"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #endif
> +#elif LINKSYS_MODEL == WRT54G	// WRT54GV1-4
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v4.20.9"
> +    #define SERIAL_NUMBER	"001"
> +    #define MINOR_VERSION	""
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v4.21.0"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #endif
> +#elif LINKSYS_MODEL == T_MOBILE
> +    #define CYBERTAN_VERSION	"v5.00.0"
> +    #define SERIAL_NUMBER	"002"
> +    #define MINOR_VERSION	""
> +#elif LINKSYS_MODEL == WRT54G3G
> +    #define CYBERTAN_VERSION	"v1.90.0"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +#elif LINKSYS_MODEL == WRT300N
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v0.92.1"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.92.1"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	""
> +  #endif
> +#elif LINKSYS_MODEL == WRT350N
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v1.03.9"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	"-beta3"
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v1.03.9"
> +    #define SERIAL_NUMBER	"000"
> +    #define MINOR_VERSION	"-beta3"
> +  #endif
> +#elif LINKSYS_MODEL == WRT610N
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v2.00.00"
> +    #define SERIAL_NUMBER	"02 betasvn0526"
> +    #define MINOR_VERSION	""
> +//add by michael at 200804014
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +//end by michael
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.00.01"
> +    #define SERIAL_NUMBER	"09"
> +    #define MINOR_VERSION	""
> +//add by michael at 20080414
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +//end by michael
> +#elif LINKSYS_MODEL == E200
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v0.0.01"
> +    #define SERIAL_NUMBER	"001"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.00.01"
> +    #define SERIAL_NUMBER	"001"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +#elif LINKSYS_MODEL == E300
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v3.0.00"
> +    #define SERIAL_NUMBER	"006"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.00.01"
> +    #define SERIAL_NUMBER	"09"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +#elif LINKSYS_MODEL == E3200
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v1.0.00"
> +    #define SERIAL_NUMBER	"1"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.00.01"
> +    #define SERIAL_NUMBER	"01"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +#elif LINKSYS_MODEL == E4200
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v1.0.00"
> +    #define SERIAL_NUMBER	"9"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v0.00.01"
> +    #define SERIAL_NUMBER	"09"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +#elif LINKSYS_MODEL == E2500
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v3.0.00"
> +    #define SERIAL_NUMBER	"6"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v1.0.00"
> +    #define SERIAL_NUMBER	"01"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +  #endif
> +#elif LINKSYS_MODEL == AC2350
> +  #if LOCALE == USA
> +    #define CYBERTAN_VERSION	"v1.0.03"
> +    #define SERIAL_NUMBER	"003"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +    #define CYBERTAN_UBOOT_VERSION	"v1.0"
> +  #else	// ETSI
> +    #define CYBERTAN_VERSION	"v1.0.00"
> +    #define SERIAL_NUMBER	"01"
> +    #define MINOR_VERSION	""
> +    #define BUILD_KEYWORD   " B"
> +    #define BUILD_NUMBER    SERIAL_NUMBER
> +    #define BETA_VERSION    " "
> +    #define CYBERTAN_UBOOT_VERSION	"v1.0"
> +  #endif
> +
> +#endif
> +
> +#if LINKSYS_MODEL == T_MOBILE
> +    #define CFES_BOOT_VERSION	"v5.3"
> +#elif LINKSYS_MODEL == E2500
> +    //#define CFES_BOOT_VERSION	"v4.13"
> +    //#define CFES_BOOT_VERSION	"v5.00"
> +    #define CFES_BOOT_VERSION	"v6.07"
> +#else
> +    #define CFES_BOOT_VERSION	"v5.2"
> +#endif
> +
> +#define LANG_VERSION		"v1.00.00"    //for lang.bin version
> control(setupwizard)
> +#define PMON_BOOT_VERSION	"v1.8"
> +#define QCA_WL_VERSION		"v10.2.138.3" /*add for QCA wireless
> version by Jemmy 2014.5.21*/
> +
> +
> +#if LINKSYS_MODEL == T_MOBILE
> +#define BOOT_IPADDR "192.168.0.1"
> +#define BOOT_NETMASK "255.255.255.0"
> +#else
> +#define BOOT_IPADDR "192.168.1.1"
> +#define BOOT_NETMASK "255.255.255.0"
> +#endif
> +
> +#define SUPPORT_4712_CHIP	0x0001
> +#define SUPPORT_INTEL_FLASH	0x0002
> +#define SUPPORT_5325E_SWITCH	0x0004
> +#define SUPPORT_4704_CHIP	0x0008
> +#define SUPPORT_5352E_CHIP	0x0010
> +
> +struct code_header {
> +	char magic[4];	// Code Pattern
> +	char res1[4];	// for extra magic
> +	char fwdate[3];	// Firmware build date
> +	char fwvern[3];	// Firmware version
> +	char id[4];	// U2ND
> +	char hw_ver;    // 0) for 4702, 1) for 4712, 2) for 4712L, 3) for 4704, 4)
> for 5352E
> +	unsigned char  sn;	// Serial Number
> +	unsigned short flags;
> +	unsigned char  stable[2];	// The image is stable (for dual image)
> +	unsigned char  try1[2];		// Try to boot image first time (for dual
> image)
> +	unsigned char  try2[2];		// Try to boot image second time (for
> dual image)
> +	unsigned char  try3[2];		// Try to boot image third time (for
> dual_image)
> +	unsigned char  res3[2];
> +} ;
> +
> +//add for AC2350 F/W header
> +#define FWHDR_MAGIC_STR "CHDR"
> +#define FWHDR_MAGIC 0X52444843
> +struct cbt_fw_header
> +{
> +	unsigned int magic;		/* "CHDR" */
> +	unsigned int len;		/* Length of file including header */
> +	unsigned int crc32;		/* 32-bit CRC */
> +	unsigned int res;
> +};
> +
> +//#ifdef MULTILANG_SUPPORT
> +struct lang_header {
> +        char magic[4];
> +        char res1[4];   // for extra magic
> +        char fwdate[3];
> +        char fwvern[3];
> +        char id[4];     // U2ND
> +        char hw_ver;    // 0: for 4702, 1: for 4712
> +	char res2;
> +        unsigned long len;
> +        unsigned char res3[8];
> +} ;
> +//#endif
> +
> +struct boot_header {
> +	char magic[3];
> +	char res[29];
> +};
> +
> +/***************************************
> + * define upnp misc                    *
> + ***************************************/
> +#if OEM == LINKSYS
> +  #if LANGUAGE == ENGLISH
> +    #define URL			"http://www.linksys.com/"
> +  #else
> +    #define URL			"http://www.linksys.co.jp/"
> +  #endif
> +  #define DEV_FRIENDLY_NAME	"Linksys"MODEL_NAME
> +  #define DEV_MFR		"Linksys"
> +  //#define DEV_MFR_URL		URL
> +  #define DEV_MFR_URL		"http://www.linksys.com"
> +  #define DEV_MODEL_DESCRIPTION	"Internet Access Server"
> +  #define DEV_MODEL		MODEL_NAME
> +  #define DEV_MODEL_NO		CYBERTAN_VERSION
> +  //#define DEV_MODEL_URL		URL
> +  #define DEV_MODEL_URL
> 	"http://www.linksys.com/international"
> +#elif OEM == PCI
> +  #if LANGUAGE == ENGLISH
> +    #define URL			"http://www.planex.com/"
> +  #else
> +    #define URL			"http://www.planex.co.jp/"
> +  #endif
> +  #define DEV_FRIENDLY_NAME	"BLW-04G Wireless Broadband
> Router"
> +  #define DEV_MFR		"Planex Communciations Inc."
> +  #define DEV_MFR_URL		URL
> +  #define DEV_MODEL_DESCRIPTION	"Internet Gateway Device with UPnP
> support"
> +  #define DEV_MODEL		"BLW-04G"
> +  #define DEV_MODEL_NO 		CYBERTAN_VERSION
> +  #define DEV_MODEL_URL		URL
> +#else
> +  #define URL			""
> +  #define DEV_FRIENDLY_NAME	MODEL_NAME
> +  #define DEV_MFR		""
> +  #define DEV_MFR_URL		URL
> +  #define DEV_MODEL_DESCRIPTION	"Internet Access Server"
> +  #define DEV_MODEL		MODEL_NAME
> +  #define DEV_MODEL_NO		CYBERTAN_VERSION
> +  #define DEV_MODEL_URL		URL
> +#endif
> +
> +/***************************************
> + * define Parental Control link        *
> + ***************************************/
> +#if LOCALE == EUROPE
> +  #define	SIGN_UP_URL
> 	"http://pcsvc.ourlinksys.com/eu/language.jsp"
> +  #define	MORE_INFO_URL
> 	"http://www.linksys.com/pcsvc/eu/info_eu.asp"
> +  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/en"
> +#elif LOCALE == GERMANY
> +  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/de/trial.asp"
> +  #define	MORE_INFO_URL
> 	"http://www.linksys.com/pcsvc/de/info_de.asp"
> +  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/de/admin.asp"
> +#elif LOCALE == FRANCE
> +  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/fr/trial.asp"
> +  #define	MORE_INFO_URL
> 	"http://www.linksys.com/pcsvc/fr/info_fr.asp"
> +  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/fr/admin.asp"
> +#else
> +  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/us/trial.asp"
> +  #define	MORE_INFO_URL
> 	"http://www.linksys.com/pcsvc/info.asp"
> +  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/us/admin.asp"
> +#endif
> +
> +/***************************************
> + * define PPTP info		       *
> + ***************************************/
> +#if OEM == LINKSYS
> +#define	PPTP_VENDOR	"Linksys"
> +#else
> +#define	PPTP_VENDOR	CT_VENDOR
> +#endif
> +#define PPTP_HOSTNAME	""
> +
> +/***************************************
> + * define L2TP info		       *
> + ***************************************/
> +#if OEM == LINKSYS
> +#define	L2TP_VENDOR	"Linksys"
> +#else
> +#define	L2TP_VENDOR	CT_VENDOR
> +#endif
> +#define L2TP_HOSTNAME	MODEL_NAME //2005-03-04 by kanki
> diff --git a/tools/firmware-utils/src/linksys/typedefs.h b/tools/firmware-
> utils/src/linksys/typedefs.h
> new file mode 100644
> index 0000000000..78989745f9
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/typedefs.h
> @@ -0,0 +1,447 @@
> +/*
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * $Id: typedefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
> + */
> +
> +#ifndef _TYPEDEFS_H_
> +#define _TYPEDEFS_H_
> +
> +#ifdef SITE_TYPEDEFS
> +
> +/*
> + * Define SITE_TYPEDEFS in the compile to include a site-specific
> + * typedef file "site_typedefs.h".
> + *
> + * If SITE_TYPEDEFS is not defined, then the code section below makes
> + * inferences about the compile environment based on defined symbols
> and
> + * possibly compiler pragmas.
> + *
> + * Following these two sections is the Default Typedefs section.
> + * This section is only processed if USE_TYPEDEF_DEFAULTS is
> + * defined. This section has a default set of typedefs and a few
> + * preprocessor symbols (TRUE, FALSE, NULL, ...).
> + */
> +
> +#include "site_typedefs.h"
> +
> +#else
> +
> +/*
> + * Infer the compile environment based on preprocessor symbols and
> pragmas.
> + * Override type definitions as needed, and include configuration-
> dependent
> + * header files to define types.
> + */
> +
> +#ifdef __cplusplus
> +
> +#define TYPEDEF_BOOL
> +#ifndef FALSE
> +#define FALSE	false
> +#endif
> +#ifndef TRUE
> +#define TRUE	true
> +#endif
> +
> +#else	/* ! __cplusplus */
> +
> +#if defined(_WIN32)
> +
> +#define TYPEDEF_BOOL
> +typedef	unsigned char	bool;			/* consistent w/BOOL
> */
> +
> +#endif /* _WIN32 */
> +
> +#endif	/* ! __cplusplus */
> +
> +#if defined(_WIN64) && !defined(EFI)
> +/* use the Windows ULONG_PTR type when compiling for 64 bit */
> +#include <basetsd.h>
> +#define TYPEDEF_UINTPTR
> +typedef ULONG_PTR uintptr;
> +#elif defined(__x86_64__)
> +#define TYPEDEF_UINTPTR
> +typedef unsigned long long int uintptr;
> +#endif
> +
> +#if defined(_HNDRTE_) && !defined(_HNDRTE_SIM_)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(_MINOSL_)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(EFI) && !defined(_WIN64)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(TARGETOS_nucleus)
> +/* for 'size_t' type */
> +#include <stddef.h>
> +
> +/* float_t types conflict with the same typedefs from the standard ANSI-C
> +** math.h header file. Don't re-typedef them here.
> +*/
> +#define TYPEDEF_FLOAT_T
> +#endif   /* TARGETOS_nucleus */
> +
> +#if defined(_NEED_SIZE_T_)
> +typedef long unsigned int size_t;
> +#endif
> +
> +#ifdef __DJGPP__
> +typedef long unsigned int size_t;
> +#endif /* __DJGPP__ */
> +
> +#ifdef _MSC_VER	    /* Microsoft C */
> +#define TYPEDEF_INT64
> +#define TYPEDEF_UINT64
> +typedef signed __int64	int64;
> +typedef unsigned __int64 uint64;
> +#endif
> +
> +#if defined(MACOSX)
> +#ifdef KERNEL
> +#include <libkern/version.h>
> +#if VERSION_MAJOR > 10
> +#define WLP2P
> +#define IO80211P2P
> +#define APSTA
> +#define WLMCHAN
> +#define WL_MULTIQUEUE
> +#define WL_BSSCFG_TX_SUPR
> +#define WIFI_ACT_FRAME
> +#define FAST_ACTFRM_TX
> +#endif
> +#endif /* KERNEL */
> +#define TYPEDEF_BOOL
> +#endif
> +
> +#if defined(__NetBSD__)
> +#define TYPEDEF_ULONG
> +#endif
> +
> +#if defined(__sparc__)
> +#define TYPEDEF_ULONG
> +#endif
> +
> +
> +#ifdef	linux
> +/*
> + * If this is either a Linux hybrid build or the per-port code of a hybrid build
> + * then use the Linux header files to get some of the typedefs.  Otherwise,
> define
> + * them entirely in this file.  We can't always define the types because we
> get
> + * a duplicate typedef error; there is no way to "undefine" a typedef.
> + * We know when it's per-port code because each file defines LINUX_PORT
> at the top.
> + */
> +#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
> +#define TYPEDEF_UINT
> +#ifndef TARGETENV_android
> +#define TYPEDEF_USHORT
> +#define TYPEDEF_ULONG
> +#endif /* TARGETENV_android */
> +#ifdef __KERNEL__
> +#include <linux/version.h>
> +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
> +#define TYPEDEF_BOOL
> +#endif	/* >= 2.6.19 */
> +#endif	/* __KERNEL__ */
> +#endif  /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
> +#endif	/* linux */
> +
> +#if defined(__ECOS)
> +#define TYPEDEF_UCHAR
> +#define TYPEDEF_UINT
> +#define TYPEDEF_USHORT
> +#define TYPEDEF_ULONG
> +#define TYPEDEF_BOOL
> +#endif
> +
> +#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) &&
> !defined(_MINOSL_) && \
> +	!defined(__DJGPP__) && !defined(__ECOS) && !defined(__BOB__)
> && \
> +	!defined(TARGETOS_nucleus)
> +#define TYPEDEF_UINT
> +#define TYPEDEF_USHORT
> +#endif
> +
> +
> +/* Do not support the (u)int64 types with strict ansi for GNU C */
> +#if defined(__GNUC__) && defined(__STRICT_ANSI__)
> +#define TYPEDEF_INT64
> +#define TYPEDEF_UINT64
> +#endif
> +
> +/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
> + * for signed or unsigned
> + */
> +#if defined(__ICL)
> +
> +#define TYPEDEF_INT64
> +
> +#if defined(__STDC__)
> +#define TYPEDEF_UINT64
> +#endif
> +
> +#endif /* __ICL */
> +
> +#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) &&
> !defined(__DJGPP__) && \
> +	!defined(__BOB__) && !defined(TARGETOS_nucleus)
> +
> +/* pick up ushort & uint from standard types.h */
> +#if defined(linux) && defined(__KERNEL__)
> +
> +/* See note above */
> +#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
> +#ifdef USER_MODE
> +#include <sys/types.h>
> +#else
> +#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and
> water */
> +#endif /* USER_MODE */
> +#endif /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
> +
> +#else
> +
> +#if defined(__ECOS)
> +#include <pkgconf/infra.h>
> +#include <cyg/infra/cyg_type.h>
> +#include <stdarg.h>
> +#endif
> +
> +#include <sys/types.h>
> +
> +#endif /* linux && __KERNEL__ */
> +
> +#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_  && !_MINOSL_
> && !__DJGPP__ */
> +
> +#if defined(MACOSX)
> +
> +#ifdef __BIG_ENDIAN__
> +#define IL_BIGENDIAN
> +#else
> +#ifdef IL_BIGENDIAN
> +#error "IL_BIGENDIAN was defined for a little-endian compile"
> +#endif
> +#endif /* __BIG_ENDIAN__ */
> +
> +#if !defined(__cplusplus)
> +
> +#if defined(__i386__)
> +typedef unsigned char bool;
> +#else
> +typedef unsigned int bool;
> +#endif
> +#define TYPE_BOOL 1
> +enum {
> +    false	= 0,
> +    true	= 1
> +};
> +
> +#if defined(KERNEL)
> +#include <IOKit/IOTypes.h>
> +#endif /* KERNEL */
> +
> +#endif /* __cplusplus */
> +
> +#endif /* MACOSX */
> +
> +
> +/* use the default typedefs in the next section of this file */
> +#define USE_TYPEDEF_DEFAULTS
> +
> +#endif /* SITE_TYPEDEFS */
> +
> +
> +/*
> + * Default Typedefs
> + */
> +
> +#ifdef USE_TYPEDEF_DEFAULTS
> +#undef USE_TYPEDEF_DEFAULTS
> +
> +#ifndef TYPEDEF_BOOL
> +typedef	/* @abstract@ */ unsigned char	bool;
> +#endif
> +
> +/* define uchar, ushort, uint, ulong */
> +
> +#ifndef TYPEDEF_UCHAR
> +typedef unsigned char	uchar;
> +#endif
> +
> +#ifndef TYPEDEF_USHORT
> +typedef unsigned short	ushort;
> +#endif
> +
> +#ifndef TYPEDEF_UINT
> +typedef unsigned int	uint;
> +#endif
> +
> +#ifndef TYPEDEF_ULONG
> +typedef unsigned long	ulong;
> +#endif
> +
> +/* define [u]int8/16/32/64, uintptr */
> +
> +#ifndef TYPEDEF_UINT8
> +typedef unsigned char	uint8;
> +#endif
> +
> +#ifndef TYPEDEF_UINT16
> +typedef unsigned short	uint16;
> +#endif
> +
> +#ifndef TYPEDEF_UINT32
> +typedef unsigned int	uint32;
> +#endif
> +
> +#ifndef TYPEDEF_UINT64
> +typedef unsigned long long uint64;
> +#endif
> +
> +#ifndef TYPEDEF_UINTPTR
> +typedef unsigned int	uintptr;
> +#endif
> +
> +#ifndef TYPEDEF_INT8
> +typedef signed char	int8;
> +#endif
> +
> +#ifndef TYPEDEF_INT16
> +typedef signed short	int16;
> +#endif
> +
> +#ifndef _SLHC_H
> +#ifndef TYPEDEF_INT32
> +typedef signed int	int32;
> +#endif
> +#endif
> +
> +#ifndef TYPEDEF_INT64
> +typedef signed long long int64;
> +#endif
> +
> +/* define float32/64, float_t */
> +
> +#ifndef TYPEDEF_FLOAT32
> +typedef float		float32;
> +#endif
> +
> +#ifndef TYPEDEF_FLOAT64
> +typedef double		float64;
> +#endif
> +
> +/*
> + * abstracted floating point type allows for compile time selection of
> + * single or double precision arithmetic.  Compiling with -DFLOAT32
> + * selects single precision; the default is double precision.
> + */
> +
> +#ifndef TYPEDEF_FLOAT_T
> +
> +#if defined(FLOAT32)
> +typedef float32 float_t;
> +#else /* default to double precision floating point */
> +typedef float64 float_t;
> +#endif
> +
> +#endif /* TYPEDEF_FLOAT_T */
> +
> +/* define macro values */
> +
> +#ifndef FALSE
> +#define FALSE	0
> +#endif
> +
> +#ifndef TRUE
> +#define TRUE	1  /* TRUE */
> +#endif
> +
> +#ifndef NULL
> +#define	NULL	0
> +#endif
> +
> +#ifndef OFF
> +#define	OFF	0
> +#endif
> +
> +#ifndef ON
> +#define	ON	1  /* ON = 1 */
> +#endif
> +
> +#define	AUTO	(-1) /* Auto = -1 */
> +
> +/* define PTRSZ, INLINE */
> +
> +#ifndef PTRSZ
> +#define	PTRSZ	sizeof(char*)
> +#endif
> +
> +
> +/* Detect compiler type. */
> +#ifdef _MSC_VER
> +	#define BWL_COMPILER_MICROSOFT
> +#elif defined(__GNUC__)
> +	#define BWL_COMPILER_GNU
> +#elif defined(__CC_ARM) && __CC_ARM
> +	#define BWL_COMPILER_ARMCC
> +#else
> +	#error "Unknown compiler!"
> +#endif /* _MSC_VER */
> +
> +
> +#ifndef INLINE
> +	#if defined(BWL_COMPILER_MICROSOFT)
> +		#define INLINE __inline
> +	#elif defined(BWL_COMPILER_GNU)
> +		#define INLINE __inline__
> +	#elif defined(BWL_COMPILER_ARMCC)
> +		#define INLINE	__inline
> +	#else
> +		#define INLINE
> +	#endif /* _MSC_VER */
> +#endif /* INLINE */
> +
> +#undef TYPEDEF_BOOL
> +#undef TYPEDEF_UCHAR
> +#undef TYPEDEF_USHORT
> +#undef TYPEDEF_UINT
> +#undef TYPEDEF_ULONG
> +#undef TYPEDEF_UINT8
> +#undef TYPEDEF_UINT16
> +#undef TYPEDEF_UINT32
> +#undef TYPEDEF_UINT64
> +#undef TYPEDEF_UINTPTR
> +#undef TYPEDEF_INT8
> +#undef TYPEDEF_INT16
> +#undef TYPEDEF_INT32
> +#undef TYPEDEF_INT64
> +#undef TYPEDEF_FLOAT32
> +#undef TYPEDEF_FLOAT64
> +#undef TYPEDEF_FLOAT_T
> +
> +#endif /* USE_TYPEDEF_DEFAULTS */
> +
> +/* Suppress unused parameter warning */
> +#define UNUSED_PARAMETER(x) (void)(x)
> +
> +/*
> + * Including the bcmdefs.h here, to make sure everyone including
> typedefs.h
> + * gets this automatically
> +*/
> +#include "bcmdefs.h"
> +/*
> + * If android target is building then include this file
> + */
> +#ifndef LINUX_HYBRID
> +#ifdef TARGETENV_android
> +#include <bcm_android_types.h>
> +#endif /* TARGETENV_android */
> +#endif /* LINUX_HYBRID */
> +
> +#endif /* _TYPEDEFS_H_ */
> --
> 2.28.0
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
diff mbox series

Patch

diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index 39c3503886..1dcbd0db77 100644
--- a/tools/firmware-utils/Makefile
+++ b/tools/firmware-utils/Makefile
@@ -24,6 +24,8 @@  endef
 
 define Host/Compile
 	mkdir -p $(HOST_BUILD_DIR)/bin
+	mkdir -p $(HOST_BUILD_DIR)/bin/linksys
+	$(call cc,linksys/addfwhdr linksys/crc )
 	$(call cc,add_header)
 	$(call cc,addpattern)
 	$(call cc,asustrx)
@@ -98,7 +100,7 @@  define Host/Compile
 endef
 
 define Host/Install
-	$(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
+	$(CP) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
 endef
 
 $(eval $(call HostBuild))
diff --git a/tools/firmware-utils/src/linksys/addfwhdr.c b/tools/firmware-utils/src/linksys/addfwhdr.c
new file mode 100644
index 0000000000..6e2896c62d
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/addfwhdr.c
@@ -0,0 +1,195 @@ 
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <stdarg.h>
+#include <getopt.h>
+#include <time.h>
+#include <sys/time.h>
+
+#include "cyutils.h"
+#include "code_pattern.h"
+
+#include "typedefs.h"
+
+#define MAX_BUF	1024
+#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
+
+extern uint32 crc32(uint8 *pdata, uint nbytes, uint32 crc);
+
+int fd, fd_w;
+
+void die(const char * str, ...)
+{
+	va_list args;
+	va_start(args, str);
+	vfprintf(stderr, str, args);
+	fputc('\n', stderr);
+	exit(1);
+}
+
+int 
+fill_null0(int size)
+{
+	unsigned char buf[1];
+	int i;
+
+	fprintf(stderr,"Fill null\n");
+
+	buf[0] = 0xff;
+	for (i=0 ; i< size; i++ )
+		if (write(fd_w, buf, 1) != 1)
+			return 0;
+
+	return 1;
+}
+
+long
+file_open(const char *name)
+{
+	struct stat sb;
+	if ((fd = open(name, O_RDONLY, 0)) < 0){
+		die("Unable to open `%s' : %m", name);
+	}
+
+	if (fstat (fd, &sb))
+		die("Unable to stat `%s' : %m", name);
+
+	return sb.st_size;
+}
+
+void usage(void)
+{
+	die("Usage: addfwhdr [-i|--input] sysupgrade.o [-o|--output] code.bin\n");
+}
+
+int main(int argc, char ** argv)
+{
+	uint input_size,c;
+	char *input_file=NULL, *output_file=NULL;
+        int opt;
+        int option_index=0;
+	int garbage = 0;
+	char *buf = NULL;
+        extern char *optarg;
+        extern int optind, opterr, optopt;
+	
+	struct cbt_fw_header *fwhdr;
+	uint32 crc;	
+
+        static struct option long_options[] =
+	{
+		{"input", 1, 0, 'i'},
+		{"output", 1, 0, 'o'},
+		{"garbage", 0, 0, 'g'},
+		{0, 0, 0, 0}
+	};
+
+	printf("\n---------- add fw header --------\n");
+
+        fwhdr  = malloc(sizeof(struct cbt_fw_header));
+	memset(fwhdr, 0, sizeof(struct cbt_fw_header));	
+
+	while(1){
+		opt = getopt_long(argc, argv, "i:o:g",long_options, &option_index);
+		if(opt == -1)
+			break;
+		switch(opt){
+			case 'h' : 
+				usage(); break;
+			case 'i' :
+				input_file = optarg;
+				printf("input file is [%s]\n",input_file); break;
+			case 'o' :
+				output_file = optarg;
+				printf("output file is [%s]\n",output_file); break;
+			case 'g' :
+				garbage = 1; break;
+			default :
+				usage();
+		}
+	}
+
+	if(!input_file || !output_file)
+	{
+		printf("You must specify the input and output file!\n");
+		usage();
+	}
+
+	
+	unlink(output_file);
+	if ((fd_w = open(output_file,O_RDWR|O_CREAT, S_IREAD | S_IWRITE)) < 0){
+		die("Unable to open `%s' : %m", output_file);
+	}
+	
+	fwhdr = malloc(sizeof(struct cbt_fw_header));
+	memset(fwhdr, 0, sizeof(struct cbt_fw_header));	
+	
+	memcpy((char *)&fwhdr->magic, FWHDR_MAGIC_STR, sizeof(fwhdr->magic));
+	
+	input_size = file_open(input_file);
+	if(!(buf = malloc(input_size)))
+	{
+		perror("malloc");
+		goto fail;
+	}
+	c = read(fd, buf, input_size);
+	fwhdr->len = input_size + sizeof(struct cbt_fw_header);
+
+	fwhdr->res = fwhdr->res | 0x1;
+	
+	//junzhao add fw build date in cbt_fw_header for calculate MD5
+	#if 0
+	{
+	       static char *months[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
+	       int year, day, mon=1;
+               char temp[10]={0};
+	       unsigned char *p_date = (unsigned char *)&fwhdr->res;
+               int j;
+
+               sscanf(__DATE__, "%s %d %d", temp, &day, &year);
+       
+               for(j=0;j<12;j++) {
+                       if(!strcmp(temp, months[j])) {
+                               mon = j+1;
+                               break;
+                       }
+               }
+               p_date[0]= year-2000;
+               p_date[1]= mon;
+               p_date[2]= day;
+
+	       printf("%s: Build date(20%d-%d-%d)\n", __FUNCTION__, p_date[0], p_date[1], p_date[2]);
+
+	}
+	#endif
+	//end
+	
+	crc = crc32((uint8 *)&fwhdr->res, 4, CRC32_INIT_VALUE);
+	crc = crc32((uint8 *)&buf[0], input_size, crc);
+	
+	fwhdr->crc32 = crc;
+
+	/* write code pattern header */
+	write(fd_w, fwhdr, sizeof(struct cbt_fw_header));
+
+	if(write(fd_w, buf, c)!=c)
+		die("Write call failed!\n");
+	
+#if 0
+	if(garbage == 1){			// add garbage, let image is a multiple of 1024, and the web upgrade will ok
+		printf("Add %d bytes garbage\n",1024-32);	
+		if(!fill_null0(1024-32))
+			die("error!\n");
+	}
+#endif
+fail:
+	if(buf)
+		free(buf);
+	close (fd);
+	close (fd_w);
+	
+	return 0;
+}
diff --git a/tools/firmware-utils/src/linksys/bcmdefs.h b/tools/firmware-utils/src/linksys/bcmdefs.h
new file mode 100644
index 0000000000..edd7397892
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/bcmdefs.h
@@ -0,0 +1,318 @@ 
+/*
+ * Misc system wide definitions
+ *
+ * Copyright (C) 2009, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcmdefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
+ */
+
+#ifndef	_bcmdefs_h_
+#define	_bcmdefs_h_
+
+/*
+ * One doesn't need to include this file explicitly, gets included automatically if
+ * typedefs.h is included.
+ */
+
+/* Use BCM_REFERENCE to suppress warnings about intentionally-unused function
+ * arguments or local variables.
+ */
+#define BCM_REFERENCE(data)	((void)data)
+
+/* Reclaiming text and data :
+ * The following macros specify special linker sections that can be reclaimed
+ * after a system is considered 'up'.
+ * BCMATTACHFN is also used for detach functions (it's not worth having a BCMDETACHFN,
+ * as in most cases, the attach function calls the detach function to clean up on error).
+ */
+#ifdef DONGLEBUILD
+
+extern bool bcmreclaimed;
+
+#define BCMATTACHDATA(_data)	__attribute__ ((__section__ (".dataini2." #_data))) _data
+#define BCMATTACHFN(_fn)	__attribute__ ((__section__ (".textini2." #_fn))) _fn
+
+#define BCMPREATTACHDATA(_data)	__attribute__ ((__section__ (".dataini2." #_data))) _data
+#define BCMPREATTACHFN(_fn)	__attribute__ ((__section__ (".textini2." #_fn))) _fn
+
+#if defined(BCMRECLAIM)
+#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini1." #_data))) _data
+#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini1." #_fn))) _fn
+#define CONST
+#else
+#define BCMINITDATA(_data)	_data
+#define BCMINITFN(_fn)		_fn
+#define CONST	const
+#endif
+
+/* Non-manufacture or internal attach function/dat */
+#if !defined(WLTEST)
+#define	BCMNMIATTACHFN(_fn)	BCMATTACHFN(_fn)
+#define	BCMNMIATTACHDATA(_data)	BCMATTACHDATA(_data)
+#else
+#define	BCMNMIATTACHFN(_fn)	_fn
+#define	BCMNMIATTACHDATA(_data)	_data
+#endif	
+
+#define BCMUNINITFN(_fn)	_fn
+
+#define BCMFASTPATH
+
+#else /* DONGLEBUILD */
+
+#define bcmreclaimed 		0
+#define BCMATTACHDATA(_data)	_data
+#define BCMATTACHFN(_fn)	_fn
+#define BCMPREATTACHDATA(_data)	_data
+#define BCMPREATTACHFN(_fn)	_fn
+#define BCMINITDATA(_data)	_data
+#define BCMINITFN(_fn)		_fn
+#define BCMUNINITFN(_fn)	_fn
+#define	BCMNMIATTACHFN(_fn)	_fn
+#define	BCMNMIATTACHDATA(_data)	_data
+#define CONST	const
+#ifdef mips
+#define BCMFASTPATH		__attribute__ ((__section__(".text.fastpath")))
+#else
+#define BCMFASTPATH
+#endif
+
+#endif /* DONGLEBUILD */
+
+#if defined(BCMROMOFFLOAD) || defined(BCMROMBUILD)
+typedef struct {
+	uint16 esiz;
+	uint16 cnt;
+	void *addr;
+} bcmromdat_patch_t;
+#endif
+
+/* Put some library data/code into ROM to reduce RAM requirements */
+#if defined(BCMROMOFFLOAD)
+#define BCMROMDATA(_data)	__attribute__ ((weak, __section__ (".datarom."#_data))) _data
+#define BCMROMDAT_NAME(_data)	_data
+#define BCMROMFN(_fn)		__attribute__ ((weak, long_call, __section__ (".textrom."#_fn))) _fn
+#define BCMROMDAT_ARYSIZ(data)	ARRAYSIZE(data)
+#define BCMROMDAT_SIZEOF(data)	sizeof(data)
+#define BCMROMDAT_APATCH(data) \
+	const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
+	{ sizeof(data[0]), sizeof(data)/sizeof(data[0]), ((void*)data) };
+#define BCMROMDAT_SPATCH(data) \
+	const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
+	{ sizeof(data), 1, ((void*)&data) };
+#define BCMROMFN_NAME(_fn)	_fn
+#define STATIC
+#elif defined(BCMROMBUILD)
+#include <bcmjmptbl.h>
+#define STATIC
+#else /* !BCMROMBUILD */
+#define BCMROMDATA(_data)	_data
+#define BCMROMDAT_NAME(_data)	_data
+#define BCMROMFN(_fn)		_fn
+#define BCMROMFN_NAME(_fn)	_fn
+#define STATIC	static
+#define BCMROMDAT_ARYSIZ(data)	ARRAYSIZE(data)
+#define BCMROMDAT_SIZEOF(data)	sizeof(data)
+#define BCMROMDAT_APATCH(data)
+#define BCMROMDAT_SPATCH(data)
+#endif /* !BCMROMBUILD */
+
+/* Bus types */
+#define	SI_BUS			0	/* SOC Interconnect */
+#define	PCI_BUS			1	/* PCI target */
+#define	PCMCIA_BUS		2	/* PCMCIA target */
+#define SDIO_BUS		3	/* SDIO target */
+#define JTAG_BUS		4	/* JTAG */
+#define USB_BUS			5	/* USB (does not support R/W REG) */
+#define SPI_BUS			6	/* gSPI target */
+#define RPC_BUS			7	/* RPC target */
+
+/* Allows size optimization for single-bus image */
+#ifdef BCMBUSTYPE
+#define BUSTYPE(bus) 	(BCMBUSTYPE)
+#else
+#define BUSTYPE(bus) 	(bus)
+#endif
+
+/* Allows size optimization for single-backplane image */
+#ifdef BCMCHIPTYPE
+#define CHIPTYPE(bus) 	(BCMCHIPTYPE)
+#else
+#define CHIPTYPE(bus) 	(bus)
+#endif
+
+
+/* Allows size optimization for SPROM support */
+#if defined(BCMSPROMBUS)
+#define SPROMBUS	(BCMSPROMBUS)
+#elif defined(SI_PCMCIA_SROM)
+#define SPROMBUS	(PCMCIA_BUS)
+#else
+#define SPROMBUS	(PCI_BUS)
+#endif
+
+/* Allows size optimization for single-chip image */
+#ifdef BCMCHIPID
+#define CHIPID(chip)	(BCMCHIPID)
+#else
+#define CHIPID(chip)	(chip)
+#endif
+
+#ifdef BCMCHIPREV
+#define CHIPREV(rev)	(BCMCHIPREV)
+#else
+#define CHIPREV(rev)	(rev)
+#endif
+
+/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
+#define DMADDR_MASK_32 0x0		/* Address mask for 32-bits */
+#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
+#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-part) */
+
+#define	DMADDRWIDTH_30  30 /* 30-bit addressing capability */
+#define	DMADDRWIDTH_32  32 /* 32-bit addressing capability */
+#define	DMADDRWIDTH_63  63 /* 64-bit addressing capability */
+#define	DMADDRWIDTH_64  64 /* 64-bit addressing capability */
+
+#ifdef BCMDMA64OSL
+typedef struct {
+	uint32 loaddr;
+	uint32 hiaddr;
+} dma64addr_t;
+
+typedef dma64addr_t dmaaddr_t;
+#define PHYSADDRHI(_pa) ((_pa).hiaddr)
+#define PHYSADDRHISET(_pa, _val) \
+	do { \
+		(_pa).hiaddr = (_val);		\
+	} while (0)
+#define PHYSADDRLO(_pa) ((_pa).loaddr)
+#define PHYSADDRLOSET(_pa, _val) \
+	do { \
+		(_pa).loaddr = (_val);		\
+	} while (0)
+
+#else
+typedef unsigned long dmaaddr_t;
+#define PHYSADDRHI(_pa) (0)
+#define PHYSADDRHISET(_pa, _val)
+#define PHYSADDRLO(_pa) ((_pa))
+#define PHYSADDRLOSET(_pa, _val) \
+	do { \
+		(_pa) = (_val);			\
+	} while (0)
+#endif /* BCMDMA64OSL */
+
+/* One physical DMA segment */
+typedef struct  {
+	dmaaddr_t addr;
+	uint32	  length;
+} hnddma_seg_t;
+
+#if defined(MACOSX)
+/* In MacOS, the OS API may return large number of segments. Setting this number lower
+ * will result in failure of dma map
+ */
+#define MAX_DMA_SEGS 8
+#else
+#define MAX_DMA_SEGS 4
+#endif
+
+
+typedef struct {
+	void *oshdmah; /* Opaque handle for OSL to store its information */
+	uint origsize; /* Size of the virtual packet */
+	uint nsegs;
+	hnddma_seg_t segs[MAX_DMA_SEGS];
+} hnddma_seg_map_t;
+
+
+/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF).
+ * By doing, we avoid the need  to allocate an extra buffer for the header when bridging to WL.
+ * There is a compile time check in wlc.c which ensure that this value is at least as big
+ * as TXOFF. This value is used in dma_rxfill (hnddma.c).
+ */
+
+#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY)
+/* add 40 bytes to allow for extra RPC header and info  */
+#define BCMEXTRAHDROOM 220
+#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
+#ifdef CTFMAP
+#define BCMEXTRAHDROOM 176
+#else /* CTFMAP */
+#define BCMEXTRAHDROOM 172
+#endif /* CTFMAP */
+#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
+
+/* Headroom required for dongle-to-host communication.  Packets allocated
+ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
+ * leave this much room in front for low-level message headers which may
+ * be needed to get across the dongle bus to the host.  (These messages
+ * don't go over the network, so room for the full WL header above would
+ * be a waste.).
+ */
+#ifdef BCMUSBDEV
+#define BCMDONGLEHDRSZ 0
+#define BCMDONGLEPADSZ 0
+#else
+#define BCMDONGLEHDRSZ 12
+#define BCMDONGLEPADSZ 16
+#endif
+
+#define BCMDONGLEOVERHEAD	(BCMDONGLEHDRSZ + BCMDONGLEPADSZ)
+
+#ifdef BCMDBG
+
+#ifndef BCMDBG_ERR
+#define BCMDBG_ERR
+#endif /* BCMDBG_ERR */
+
+#ifndef BCMDBG_ASSERT
+#define BCMDBG_ASSERT
+#endif /* BCMDBG_ASSERT */
+
+#endif /* BCMDBG */
+
+#if defined(BCMDBG_ASSERT) || defined(BCMASSERT_LOG)
+#define BCMASSERT_SUPPORT
+#endif /* BCMDBG_ASSERT || BCMASSERT_LOG */
+
+/* Macros for doing definition and get/set of bitfields
+ * Usage example, e.g. a three-bit field (bits 4-6):
+ *    #define <NAME>_M	BITFIELD_MASK(3)
+ *    #define <NAME>_S	4
+ * ...
+ *    regval = R_REG(osh, &regs->regfoo);
+ *    field = GFIELD(regval, <NAME>);
+ *    regval = SFIELD(regval, <NAME>, 1);
+ *    W_REG(osh, &regs->regfoo, regval);
+ */
+#define BITFIELD_MASK(width) \
+		(((unsigned)1 << (width)) - 1)
+#define GFIELD(val, field) \
+		(((val) >> field ## _S) & field ## _M)
+#define SFIELD(val, field, bits) \
+		(((val) & (~(field ## _M << field ## _S))) | \
+		 ((unsigned)(bits) << field ## _S))
+
+/* define BCMSMALL to remove misc features for memory-constrained environments */
+#ifdef BCMSMALL
+#undef	BCMSPACE
+#define bcmspace	FALSE	/* if (bcmspace) code is discarded */
+#else
+#define	BCMSPACE
+#define bcmspace	TRUE	/* if (bcmspace) code is retained */
+#endif
+
+/* Max. nvram variable table size */
+#define	MAXSZ_NVRAM_VARS	4096
+
+#define LOCATOR_EXTERN static
+
+#endif /* _bcmdefs_h_ */
diff --git a/tools/firmware-utils/src/linksys/code_pattern.h b/tools/firmware-utils/src/linksys/code_pattern.h
new file mode 100644
index 0000000000..0bbaa1102d
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/code_pattern.h
@@ -0,0 +1,396 @@ 
+#ifndef _CODE_PATTERN_H_
+#define _CODE_PATTERN_H_
+
+#define CODE_ID		"U2ND"
+#define BOOT_PATTERN	"EST"
+#define UP_PMON		1
+#define UP_MAC		2
+#define UP_CODE		3
+#define UP_PIGGY	4
+#define UP_EOU_KEY	5
+#define UP_SN		6
+#define UP_LANG		7
+#define UP_T_CERT	8
+#define CMP_T_CERT	9	//for factory test.
+#define UP_CODE2       10
+#define UP_FULL_WL     11
+#define UP_WSC_PIN     12
+#define UP_COUNTRY     13
+#define UP_QUAN_BOOT   14
+#define UP_QUAN_IMAGE   15
+
+#define LINKSYS		7
+#define PCI_OEM		9	// <remove the line>
+#define ELSA		10	// <remove the line>
+#define ALLNET		11	// <remove the line>
+#define REENET		12	// 2003/06/21	<remove the line>
+#define CISCO		90
+#define	OTHER_OEM	99	// <remove the line>
+
+#define ENGLISH 	1
+#define JAPANESE	2
+#define GERMAN		3
+#define FRENCH		4
+#define KOREAN		5
+
+#define	USA		1
+#define	JAPAN		2
+#define	EUROPE		3
+#define WW		4
+#define GERMANY		5
+#define	KOREA		6
+#define	FRANCE		7
+
+#define	WRT54G		1
+#define	WRT54GS		2
+#define	WRT54V5		3
+#define	DPN		4
+#define	RTA41		5
+#define	WRT54G3G	6
+#define	T_MOBILE 	7
+#define WRT300N		8
+#define WRT54GL         9
+#define WRT54GSV4       10
+#define WRT350N		11
+#define WRT610N		12
+#define WRT61XN		13
+#define E200		14
+#define E300		15
+//John
+#define WRT54GV5        16
+
+#define E3200		17
+#define E4200		18
+#define E2500		19
+#define AC2350		20
+
+
+#define CES_M_SERIAL	1
+#define CES_E_SERIAL	2
+
+/***************************************
+ * define OEM                          *
+ * Don't edit, auto edit by select.sh  *
+ ***************************************/
+#define OEM LINKSYS //LINKSYS
+//#define OEM PCI_OEM //PCI_OEM
+//#define OEM ELSA //ELSA
+//#define OEM ALLNET //ALLNET
+//#define OEM REENET //REENET
+//#define OEM OTHER_OEM //OTHER_OEM
+
+/***************************************
+ * define MODEL NAME                          *
+ * Don't edit, auto edit by select.sh  *
+ ***************************************/
+
+//#define LINKSYS_MODEL E3200 //E3200
+//#define LINKSYS_MODEL E300 //E300
+//#define LINKSYS_MODEL E200 //E200
+//#define LINKSYS_MODEL E4200 //E4200
+//#define LINKSYS_MODEL E2500 //E2500
+#define LINKSYS_MODEL AC2350 //AC2350
+
+/***************************************
+ * define MODEL SERIAL                          *
+ * Don't edit, auto edit by select.sh  *
+ ***************************************/
+//#define LINKSYS_MODEL_SERIAL CES_M_SERIAL //CES_M_SERIAL
+#define LINKSYS_MODEL_SERIAL CES_E_SERIAL //CES_E_SERIAL
+
+/***************************************
+ * define country                      *
+ * LOCALE=COUNTRY =                    *
+ ***************************************/
+#define COUNTRY		LOCALE
+#define LOCALE USA
+//#define LOCALE JAPAN
+//#define LOCALE EUROPE
+//#define LOCALE WW
+//#define LOCALE GERMANY	
+//#define LOCALE FRANCE
+//#define LOCALE KOREA
+//#define LOCALE UK
+
+/***************************************
+ * define model name and code pattern  *
+ * MODEL_NAME =                        *
+ * CODE_PATTERN =                      *
+ ***************************************/
+#if OEM == LINKSYS
+	#define	CT_VENDOR		"LINKSYS"
+	#define UI_STYLE	CISCO
+
+	#if LINKSYS_MODEL == WRT54GS
+		#define CODE_PATTERN   "W54S"
+		#if LOCALE == GERMANY
+			#define MODEL_NAME	"WRT54GS-DE"
+			#define MODEL_VERSION	""
+		#elif LOCALE == FRANCE
+			#define MODEL_NAME	"WRT54GS-FR"
+			#define MODEL_VERSION	""
+		#elif LOCALE == JAPAN
+			#define MODEL_NAME	"WRT54GS-JP"
+			#define MODEL_VERSION	""
+		#else
+			#define MODEL_NAME	"WRT54GS"
+			#define MODEL_VERSION	"V3.0"
+		#endif
+	#elif LINKSYS_MODEL == WRT54GSV4
+		#define CODE_PATTERN   "W54s"
+		#define MODEL_NAME     "WRT54GSV4"
+		#define MODEL_VERSION  ""
+	#elif LINKSYS_MODEL == DPN  //DPN
+		#define CODE_PATTERN   "WDPN"
+		#define MODEL_NAME     "DPN"
+		#define MODEL_VERSION	""
+	#elif LINKSYS_MODEL == WRT54GV5
+		#define CODE_PATTERN   "W54V"
+		#define MODEL_NAME     "WRTA54G"
+		#define MODEL_VERSION	""
+	#elif LINKSYS_MODEL == RTA41
+		#define CODE_PATTERN   "W54N"
+		#define MODEL_NAME     "RTA41"
+		#define MODEL_VERSION	""
+	#elif LINKSYS_MODEL == WRT54G3G
+		#define CODE_PATTERN   "W54F"
+		#if LOCALE == EUROPE
+			#define MODEL_NAME     "WRT54G3G-EU"
+			#define MODEL_VERSION	""
+		#elif LOCALE == UK
+			#define MODEL_NAME     "WRT54G3G-UK"
+			#define MODEL_VERSION	""
+		#else
+			#define MODEL_NAME     "WRT54G3G"
+			#define MODEL_VERSION	"V1"
+		#endif
+	#elif LINKSYS_MODEL == T_MOBILE
+		#define CODE_PATTERN   "W54T"
+		#define MODEL_NAME     "WRT54G-TM"
+		#define MODEL_VERSION	"V3.0"
+	#elif LINKSYS_MODEL == WRT300N
+		#define CODE_PATTERN   "EWCB"
+		#define MODEL_NAME     "WRT300N"
+		#define MODEL_VERSION	"V1.0"
+	#elif LINKSYS_MODEL == WRT350N
+		#define CODE_PATTERN   "EWCG"
+		#define MODEL_NAME     "WRT350N"
+		#define MODEL_VERSION	"V1.0"
+	#elif LINKSYS_MODEL == WRT54G
+		#define CODE_PATTERN   "W54G"
+		#if LOCALE == GERMANY
+			#define MODEL_NAME	"WRT54G-DE"
+			#define MODEL_VERSION	""
+		#elif LOCALE == FRANCE
+			#define MODEL_NAME	"WRT54G-FR"
+			#define MODEL_VERSION	""
+		#elif LOCALE == JAPAN
+			#define MODEL_NAME	"WRT54G-JP"
+			#define MODEL_VERSION	""
+		#else
+			#define MODEL_NAME	"WRT54G"
+			#define MODEL_VERSION	"V4.0"
+		#endif
+	#elif LINKSYS_MODEL == WRT54GL
+		#define CODE_PATTERN   "W54G"
+		#define MODEL_NAME	"WRT54GL"
+		#define MODEL_VERSION	"V1"
+	#elif LINKSYS_MODEL == WRT610N
+		#define CODE_PATTERN   "610N"
+		#define MODEL_NAME	"WRT610N"
+		#define MODEL_VERSION	"V2"              //V1 or V2
+	#elif LINKSYS_MODEL == E200
+		#define CODE_PATTERN   "32XN"
+		#define MODEL_NUMBER	"E2000"
+		#define MODEL_NAME	"Linksys E2000"
+		#define MODEL_VERSION	"V1.0"
+	#elif LINKSYS_MODEL == E300
+		#define CODE_PATTERN   "61XN"
+		#define MODEL_NUMBER	"E3000"	    //model number added by Jemmy 2009.11.17
+		#define MODEL_NAME	"Linksys E3000"
+		#define MODEL_VERSION	"V1"              //V1 or V2
+	#elif LINKSYS_MODEL == E3200
+		#define CODE_PATTERN   "3200"
+		#define MODEL_NUMBER	"E3200"	    //model number added by zhaoguang 2010.10.25
+		#define MODEL_NAME	"Linksys E3200"
+		#define MODEL_VERSION	"V1" 
+	#elif LINKSYS_MODEL == E4200
+		#define CODE_PATTERN   "4200"
+		#define MODEL_NUMBER	"E4200"	    //model number added by Jemmy 2009.11.17
+		#define MODEL_NAME	"Linksys E4200"
+		#define MODEL_VERSION	"V1"              //V1 or V2
+	#elif (LINKSYS_MODEL == E2500)
+		#define CODE_PATTERN   "25V3"
+		#define MODEL_NUMBER	"E2500"	    //model number
+		#define MODEL_NAME	"Linksys E2500"
+		#define MODEL_VERSION	"V3"              //V1 or V2	
+	#elif (LINKSYS_MODEL == AC2350)
+		#define CODE_PATTERN   "8350"
+		#define MODEL_NUMBER	"E8350"	    //model number
+		#define MODEL_NAME	"Linksys E8350"
+		#define MODEL_VERSION	"V1"              //V1 or V2
+
+	#else
+		#error "You must select a LINKSYS_MODEL!!"
+	#endif
+
+	#if LINKSYS_MODEL == WRT54G || LINKSYS_MODEL == WRT54GL
+		#define INTEL_FLASH_SUPPORT_VERSION_FROM "v1.41.8"
+		#define BCM4712_CHIP_SUPPORT_VERSION_FROM "v1.50.0"
+		#define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM "v1.3"
+		#define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM "v2.0"
+	#else
+		#define INTEL_FLASH_SUPPORT_VERSION_FROM "v0.00.0"
+		#define BCM4712_CHIP_SUPPORT_VERSION_FROM "v0.00.0"
+		#define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM "v0.0"
+		#define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM "v0.0"
+	#endif
+	#if	LINKSYS_MODEL == WRT350N
+		#define WRT350N_SUPPORT_VERSION_FROM "v0.85.3"		
+	#endif
+
+#elif OEM == PCI_OEM
+	#define CODE_PATTERN    "W54P"
+	#if LOCALE == JAPAN
+		#define MODEL_NAME	"Planex BLW-04G Wireless Router"
+	#else
+		#define MODEL_NAME	"Advanced Wireless 11g Router"
+	#endif
+	#define	CT_VENDOR		"PCI"
+#elif OEM == ELSA
+	#define CODE_PATTERN    "W54E"
+	#define MODEL_NAME	"ELSA WLAN DSL-Router 4P G"
+	#define	CT_VENDOR	"ELSA"
+#elif OEM == ALLNET
+	#define CODE_PATTERN    "W54A"
+	#define MODEL_NAME	"Advanced Wireless 11g Router"
+	#define	CT_VENDOR	"ALLNET"
+#elif OEM == REENET
+	#define CODE_PATTERN    "W54R"
+	#define MODEL_NAME	"RW-IPG500"
+	#define	CT_VENDOR	"REENET"
+#elif OEM == OTHER_OEM
+	#define CODE_PATTERN    "W54O"
+	#define MODEL_NAME	"Advanced Wireless 11g Router"
+	#define	CT_VENDOR	"OTHER_OEM"
+#else
+	#error "Your must select a OEM name!!"
+#endif
+
+/***************************************
+ * define language                     *
+ * LANGUAGE =                          *
+ * LANG_SEL=EN                         *
+ * HTTP_CHARSET =		       *
+ ***************************************/
+#if LOCALE == JAPAN
+	#define	LANGUAGE	JAPANESE
+	#define	HTTP_CHARSET	"shift-jis"
+#elif LOCALE == GERMANY
+	#define LANGUAGE	GERMAN
+	#define	HTTP_CHARSET	"iso-8859-1"
+#elif LOCALE == FRANCE
+	#define LANGUAGE	FRENCH
+	#define	HTTP_CHARSET	"iso-8859-1"
+#elif LOCALE == KOREA
+	#define LANGUAGE 	KOREAN
+	#define	HTTP_CHARSET	"euc-kr"
+#else
+	#define LANGUAGE 	ENGLISH
+	#define	HTTP_CHARSET	"iso-8859-1"
+#endif
+
+/***************************************
+ * define wireless max channel         *
+ * WL_MAX_CHANNEL =                    *
+ ***************************************/
+#if LOCALE == JAPAN || LOCALE == EUROPE || LOCALE == GERMANY || LOCALE == FRANCE
+	#define	WL_MAX_CHANNEL	"13"
+#elif OEM == KOREA			// <remove the line>
+	#define	WL_MAX_CHANNEL	"13"	// <remove the line>
+#else
+	#define WL_MAX_CHANNEL	"11"
+#endif
+
+/***************************************
+ * define web file path                *
+ * WEB_PAGE =                          *
+ ***************************************/
+#if OEM == LINKSYS
+#if UI_STYLE ==  CISCO
+	#if LOCALE == JAPAN
+		#define	WEB_PAGE	"cisco_wrt54g_jp"
+	#elif LOCALE == GERMANY
+		#define	WEB_PAGE	"cisco_wrt54g_de"
+	#elif LOCALE == FRANCE
+		#define	WEB_PAGE	"cisco_wrt54g_fr"
+	#else
+		#if LINKSYS_MODEL == E200
+			#define WEB_PAGE        "ces_m"
+		#elif LINKSYS_MODEL == E300
+			#define WEB_PAGE        "ces_m"
+		#elif LINKSYS_MODEL == E3200
+			#define WEB_PAGE        "e3200_m"
+		#elif LINKSYS_MODEL == E4200
+			#define WEB_PAGE        "e4200_m"
+		#elif (LINKSYS_MODEL == E2500)
+			#define WEB_PAGE        "e2500_m"	
+		#elif (LINKSYS_MODEL == AC2350)
+			#define WEB_PAGE        "ac2350_m"
+		#else
+			#define WEB_PAGE	"cisco_wrt54g_m"
+		#endif
+	#endif
+#else
+	#if LOCALE == JAPAN
+		#define	WEB_PAGE	"linksys_wrt54g_jp"
+	#else
+		#define WEB_PAGE	"linksys_wrt54g_en"
+	#endif
+#endif
+#elif OEM == PCI_OEM
+	#if LOCALE == JAPAN
+		#define	WEB_PAGE	"pci_wrt54g_jp"
+	#else
+		#define WEB_PAGE	"pci_wrt54g_en"
+	#endif
+#elif OEM == ELSA
+	#define WEB_PAGE	"elsa_wrt54g_en"
+#elif OEM == ALLNET
+	#define WEB_PAGE	"nonbrand"
+#elif OEM == REENET
+	#define WEB_PAGE	"reenet_wrt54g_kr"
+#elif	OEM == OTHER_OEM
+	#define WEB_PAGE	"nonbrand"
+#endif
+
+/***************************************
+ * check LOCALE
+ ***************************************/
+#if OEM == LINKSYS
+ #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE && LOCALE != GERMANY && LOCALE != FRANCE
+	#error	"The LOCALE for LINKSYS is error, must be USA, EUROPE, JAPAN, GERMANY or FRANCE"
+ #endif
+#elif OEM == PCI_OEM
+ #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE
+	#error	"The LOCALE for PCI is error, must be USA or JAPAN"
+ #endif
+#elif OEM == ELSA
+ #if LOCALE != EUROPE
+	#error	"The LOCALE for ELSA is error, must be EUROPE"
+ #endif
+#elif OEM == ALLNET
+ #if LOCALE != EUROPE
+	#error	"The LOCALE for ALLNET is error, must be EUROPE"
+ #endif
+#elif OEM == REENET
+ #if LOCALE != KOREA
+	#error	"The LOCALE for REENET is error, must be KOREA"
+ #endif
+#elif OEM == OTHER_OEM
+ #if LOCALE != USA && LOCALE != EUROPE
+	#error	"The LOCALE for NONBRAND is error, must be USA or EUROPE"
+ #endif
+#endif
+
+#endif
diff --git a/tools/firmware-utils/src/linksys/crc.c b/tools/firmware-utils/src/linksys/crc.c
new file mode 100644
index 0000000000..7d3e641df9
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/crc.c
@@ -0,0 +1,290 @@ 
+/*******************************************************************************
+ * $Id: crc.c,v 1.1.1.1 2010/11/24 06:37:40 gavin.ke Exp $
+ * Copyright 2007, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * crc.c: utility function to compute various CRCs
+ ******************************************************************************/
+
+#include "typedefs.h"
+#include "crc.h"
+
+/*******************************************************************************
+ * hcs
+ *
+ * Computes and inserts a header check sum based on crc8 polynomial
+ * below.  Unlike a typical crc, the header check sum is inserted 13
+ * bytes from the end of the byte stream (rather than appended to the
+ * end of the byte stream) such that at the receiver a normal checksum
+ * computation over all of the bytes results in a known good value.
+ * Given a constant 12 bytes after the header checksum to the end of
+ * the header, a lookup table can be used to provide the actual value
+ * inserted.
+ ******************************************************************************/
+
+static uint8 hcs_table[8] = { 0x16, 0x2c, 0x58, 0xb0, 0x37, 0x6e, 0xdc, 0xef};
+
+void
+hcs(
+    uint8 *pheader, /* pointer to array of data to process */
+    uint nbytes   /* number of input data bytes to process */
+)
+{
+    uint8 hcs0, hcs1;
+    int i;
+
+    /* run once with zeros in hcs position, 13th byte from the end */
+    pheader[nbytes - 12 - 1] = 0;
+    hcs0 = crc8(pheader, nbytes, CRC8_INIT_VALUE);
+ 
+    /* now compute real hcs to insert in place of zeros */
+    hcs1 = 0;
+    for (i = 0; i < 8; i++) {
+        hcs1 ^= ((hcs0 & (1 << i)) != 0 ? hcs_table[i] : 0);
+    }
+    pheader[nbytes - 12 - 1] = hcs1 ^ 0xff;
+    return;
+}
+
+/*******************************************************************************
+ * crc8
+ *
+ * Computes a crc8 over the input data using the polynomial:
+ *
+ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
+ *
+ * The caller provides the initial value (either CRC8_INIT_VALUE
+ * or the previous returned value) to allow for processing of 
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When checking, a final
+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ ******************************************************************************/
+
+static uint8 crc8_table[256] = {
+    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
+};
+
+#define CRC_INNER_LOOP(n, c, x) \
+    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+
+uint8
+crc8(
+    uint8 *pdata,  /* pointer to array of data to process */
+    uint nbytes, /* number of input data bytes to process */
+    uint8 crc      /* either CRC8_INIT_VALUE or previous return value */
+)
+{
+    while (nbytes-- > 0)
+        CRC_INNER_LOOP(8, crc, *pdata++);
+    return crc;
+}
+
+/*******************************************************************************
+ * crc16
+ *
+ * Computes a crc16 over the input data using the polynomial:
+ *
+ *       x^16 + x^12 +x^5 + 1
+ *
+ * The caller provides the initial value (either CRC16_INIT_VALUE
+ * or the previous returned value) to allow for processing of 
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When checking, a final
+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ ******************************************************************************/
+
+static uint16 crc16_table[256] = {
+    0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
+    0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
+    0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
+    0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
+    0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
+    0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
+    0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
+    0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
+    0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
+    0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
+    0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
+    0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
+    0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
+    0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
+    0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
+    0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
+    0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
+    0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
+    0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
+    0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
+    0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
+    0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
+    0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
+    0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
+    0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
+    0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
+    0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
+    0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
+    0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
+    0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
+    0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
+    0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
+};
+
+uint16
+crc16(
+    uint8 *pdata,  /* pointer to array of data to process */
+    uint nbytes, /* number of input data bytes to process */
+    uint16 crc     /* either CRC16_INIT_VALUE or previous return value */
+)
+{
+    while (nbytes-- > 0)
+        CRC_INNER_LOOP(16, crc, *pdata++);
+    return crc;
+}
+
+/*******************************************************************************
+ * crc32
+ *
+ * Computes a crc32 over the input data using the polynomial:
+ *
+ *       x^32+x^26+x^23+x^22+x^16+x^12+x^11+X^10+x^8+x^7+x^5+x^4+x^2+x+1
+ *
+ * The caller provides the initial value (either CRC32_INIT_VALUE
+ * or the previous returned value) to allow for processing of 
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When checking, a final
+ * return value of CRC32_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ ******************************************************************************/
+
+static uint32 crc32_table[256] = {
+    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+
+uint32
+crc32(
+    uint8 *pdata,  /* pointer to array of data to process */
+    uint nbytes, /* number of input data bytes to process */
+    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
+)
+{
+    while (nbytes-- > 0)
+        CRC_INNER_LOOP(32, crc, *pdata++);
+    return crc;
+}
diff --git a/tools/firmware-utils/src/linksys/crc.h b/tools/firmware-utils/src/linksys/crc.h
new file mode 100644
index 0000000000..c7e783c159
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/crc.h
@@ -0,0 +1,69 @@ 
+/*******************************************************************************
+ * $Id: crc.h,v 1.2 2010/12/22 05:14:42 gavin.ke Exp $
+ * Copyright (C) 2009, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * crc.h - a function to compute crc for iLine10 headers
+ ******************************************************************************/
+
+#ifndef _RTS_CRC_H_
+#define _RTS_CRC_H_ 1
+
+#include "typedefs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define CRC8_INIT_VALUE  0xff       /* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE  0x9f       /* Good final CRC8 checksum value */
+#define HCS_GOOD_VALUE   0x39       /* Good final header checksum value */
+
+#define CRC16_INIT_VALUE 0xffff     /* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8     /* Good final CRC16 checksum value */
+
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
+
+void   hcs(uint8 *, uint);
+uint8  crc8(uint8 *, uint, uint8);
+uint16 crc16(uint8 *, uint, uint16);
+uint32 crc32(uint8 *, uint, uint32);
+
+/* macros for common usage */
+
+#define APPEND_CRC8(pbytes, nbytes)                           \
+do {                                                          \
+    uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
+    (pbytes)[(nbytes)] = tmp;                                 \
+    (nbytes) += 1;                                            \
+} while (0)
+
+#define APPEND_CRC16(pbytes, nbytes)                               \
+do {                                                               \
+    uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
+    (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff;                    \
+    (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff;                    \
+    (nbytes) += 2;                                                 \
+} while (0)
+
+#define APPEND_CRC32(pbytes, nbytes)                                   \
+do {                                                                   \
+    uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
+    (pbytes)[(nbytes) + 0] = (tmp >>  0) & 0xff;                       \
+    (pbytes)[(nbytes) + 1] = (tmp >>  8) & 0xff;                       \
+    (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff;                       \
+    (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff;                       \
+    (nbytes) += 4;                                                     \
+} while (0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTS_CRC_H_ */
diff --git a/tools/firmware-utils/src/linksys/cyutils.h b/tools/firmware-utils/src/linksys/cyutils.h
new file mode 100644
index 0000000000..fd77ab52f3
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/cyutils.h
@@ -0,0 +1,348 @@ 
+#include "code_pattern.h"
+
+#if LINKSYS_MODEL == WRT54GSV4
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v1.05.6"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v1.05.8"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #endif
+#elif LINKSYS_MODEL == WRT54GS	// WRT54GSV1-3
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v4.70.8"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v4.71.0"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #endif
+#elif LINKSYS_MODEL == WRT54GL
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v4.30.2"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v4.30.4"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #endif
+#elif LINKSYS_MODEL == WRT54G	// WRT54GV1-4
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v4.20.9"
+    #define SERIAL_NUMBER	"001"
+    #define MINOR_VERSION	""
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v4.21.0"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #endif
+#elif LINKSYS_MODEL == T_MOBILE
+    #define CYBERTAN_VERSION	"v5.00.0"
+    #define SERIAL_NUMBER	"002"
+    #define MINOR_VERSION	""
+#elif LINKSYS_MODEL == WRT54G3G
+    #define CYBERTAN_VERSION	"v1.90.0"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+#elif LINKSYS_MODEL == WRT300N
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v0.92.1"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.92.1"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	""
+  #endif
+#elif LINKSYS_MODEL == WRT350N
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v1.03.9"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	"-beta3"
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v1.03.9"
+    #define SERIAL_NUMBER	"000"
+    #define MINOR_VERSION	"-beta3"
+  #endif
+#elif LINKSYS_MODEL == WRT610N
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v2.00.00"
+    #define SERIAL_NUMBER	"02 betasvn0526"
+    #define MINOR_VERSION	""
+//add by michael at 200804014
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+//end by michael
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.00.01"
+    #define SERIAL_NUMBER	"09"
+    #define MINOR_VERSION	""
+//add by michael at 20080414
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+//end by michael
+#elif LINKSYS_MODEL == E200
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v0.0.01"
+    #define SERIAL_NUMBER	"001"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.00.01"
+    #define SERIAL_NUMBER	"001"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+#elif LINKSYS_MODEL == E300
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v3.0.00"
+    #define SERIAL_NUMBER	"006"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.00.01"
+    #define SERIAL_NUMBER	"09"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+#elif LINKSYS_MODEL == E3200
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v1.0.00"
+    #define SERIAL_NUMBER	"1"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.00.01"
+    #define SERIAL_NUMBER	"01"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+#elif LINKSYS_MODEL == E4200
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v1.0.00"
+    #define SERIAL_NUMBER	"9"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v0.00.01"
+    #define SERIAL_NUMBER	"09"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+#elif LINKSYS_MODEL == E2500
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v3.0.00"
+    #define SERIAL_NUMBER	"6"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v1.0.00"
+    #define SERIAL_NUMBER	"01"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+  #endif
+#elif LINKSYS_MODEL == AC2350
+  #if LOCALE == USA
+    #define CYBERTAN_VERSION	"v1.0.03"
+    #define SERIAL_NUMBER	"003"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+    #define CYBERTAN_UBOOT_VERSION	"v1.0"
+  #else	// ETSI
+    #define CYBERTAN_VERSION	"v1.0.00"
+    #define SERIAL_NUMBER	"01"
+    #define MINOR_VERSION	""
+    #define BUILD_KEYWORD   " B"
+    #define BUILD_NUMBER    SERIAL_NUMBER
+    #define BETA_VERSION    " "
+    #define CYBERTAN_UBOOT_VERSION	"v1.0"
+  #endif
+
+#endif
+
+#if LINKSYS_MODEL == T_MOBILE
+    #define CFES_BOOT_VERSION	"v5.3"
+#elif LINKSYS_MODEL == E2500
+    //#define CFES_BOOT_VERSION	"v4.13"
+    //#define CFES_BOOT_VERSION	"v5.00"
+    #define CFES_BOOT_VERSION	"v6.07"
+#else
+    #define CFES_BOOT_VERSION	"v5.2"
+#endif
+
+#define LANG_VERSION		"v1.00.00"    //for lang.bin version control(setupwizard)
+#define PMON_BOOT_VERSION	"v1.8"
+#define QCA_WL_VERSION		"v10.2.138.3" /*add for QCA wireless version by Jemmy 2014.5.21*/
+
+
+#if LINKSYS_MODEL == T_MOBILE
+#define BOOT_IPADDR "192.168.0.1"
+#define BOOT_NETMASK "255.255.255.0"
+#else
+#define BOOT_IPADDR "192.168.1.1"
+#define BOOT_NETMASK "255.255.255.0"
+#endif
+
+#define SUPPORT_4712_CHIP	0x0001
+#define SUPPORT_INTEL_FLASH	0x0002
+#define SUPPORT_5325E_SWITCH	0x0004
+#define SUPPORT_4704_CHIP	0x0008
+#define SUPPORT_5352E_CHIP	0x0010
+
+struct code_header {
+	char magic[4];	// Code Pattern
+	char res1[4];	// for extra magic
+	char fwdate[3];	// Firmware build date
+	char fwvern[3];	// Firmware version
+	char id[4];	// U2ND
+	char hw_ver;    // 0) for 4702, 1) for 4712, 2) for 4712L, 3) for 4704, 4) for 5352E
+	unsigned char  sn;	// Serial Number
+	unsigned short flags;
+	unsigned char  stable[2];	// The image is stable (for dual image)
+	unsigned char  try1[2];		// Try to boot image first time (for dual image)
+	unsigned char  try2[2];		// Try to boot image second time (for dual image)
+	unsigned char  try3[2];		// Try to boot image third time (for dual_image)
+	unsigned char  res3[2];
+} ;
+
+//add for AC2350 F/W header
+#define FWHDR_MAGIC_STR "CHDR"
+#define FWHDR_MAGIC 0X52444843
+struct cbt_fw_header
+{
+	unsigned int magic;		/* "CHDR" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC */
+	unsigned int res;	
+};
+
+//#ifdef MULTILANG_SUPPORT
+struct lang_header {
+        char magic[4];
+        char res1[4];   // for extra magic
+        char fwdate[3];
+        char fwvern[3];
+        char id[4];     // U2ND
+        char hw_ver;    // 0: for 4702, 1: for 4712
+	char res2;
+        unsigned long len;
+        unsigned char res3[8];
+} ;
+//#endif
+
+struct boot_header {
+	char magic[3];
+	char res[29];
+};
+
+/***************************************
+ * define upnp misc                    *
+ ***************************************/
+#if OEM == LINKSYS
+  #if LANGUAGE == ENGLISH
+    #define URL			"http://www.linksys.com/"
+  #else
+    #define URL			"http://www.linksys.co.jp/"
+  #endif
+  #define DEV_FRIENDLY_NAME	"Linksys"MODEL_NAME
+  #define DEV_MFR		"Linksys"
+  //#define DEV_MFR_URL		URL
+  #define DEV_MFR_URL		"http://www.linksys.com"
+  #define DEV_MODEL_DESCRIPTION	"Internet Access Server"
+  #define DEV_MODEL		MODEL_NAME
+  #define DEV_MODEL_NO		CYBERTAN_VERSION
+  //#define DEV_MODEL_URL		URL
+  #define DEV_MODEL_URL		"http://www.linksys.com/international"
+#elif OEM == PCI
+  #if LANGUAGE == ENGLISH
+    #define URL			"http://www.planex.com/"
+  #else
+    #define URL			"http://www.planex.co.jp/"
+  #endif
+  #define DEV_FRIENDLY_NAME	"BLW-04G Wireless Broadband Router"
+  #define DEV_MFR		"Planex Communciations Inc."
+  #define DEV_MFR_URL		URL
+  #define DEV_MODEL_DESCRIPTION	"Internet Gateway Device with UPnP support"
+  #define DEV_MODEL		"BLW-04G"
+  #define DEV_MODEL_NO 		CYBERTAN_VERSION
+  #define DEV_MODEL_URL		URL
+#else
+  #define URL			""
+  #define DEV_FRIENDLY_NAME	MODEL_NAME
+  #define DEV_MFR		""
+  #define DEV_MFR_URL		URL
+  #define DEV_MODEL_DESCRIPTION	"Internet Access Server"
+  #define DEV_MODEL		MODEL_NAME
+  #define DEV_MODEL_NO		CYBERTAN_VERSION
+  #define DEV_MODEL_URL		URL
+#endif
+
+/***************************************
+ * define Parental Control link        *
+ ***************************************/
+#if LOCALE == EUROPE
+  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/eu/language.jsp"
+  #define	MORE_INFO_URL	"http://www.linksys.com/pcsvc/eu/info_eu.asp"
+  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/en"
+#elif LOCALE == GERMANY
+  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/de/trial.asp"
+  #define	MORE_INFO_URL	"http://www.linksys.com/pcsvc/de/info_de.asp"
+  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/de/admin.asp"
+#elif LOCALE == FRANCE
+  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/fr/trial.asp"
+  #define	MORE_INFO_URL	"http://www.linksys.com/pcsvc/fr/info_fr.asp"
+  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/fr/admin.asp"
+#else
+  #define	SIGN_UP_URL	"http://pcsvc.ourlinksys.com/us/trial.asp"
+  #define	MORE_INFO_URL	"http://www.linksys.com/pcsvc/info.asp"
+  #define	ADMIN_URL	"http://pcsvc.ourlinksys.com/us/admin.asp"
+#endif
+
+/***************************************
+ * define PPTP info		       * 
+ ***************************************/
+#if OEM == LINKSYS
+#define	PPTP_VENDOR	"Linksys"
+#else
+#define	PPTP_VENDOR	CT_VENDOR
+#endif
+#define PPTP_HOSTNAME	""
+
+/***************************************
+ * define L2TP info		       *
+ ***************************************/
+#if OEM == LINKSYS
+#define	L2TP_VENDOR	"Linksys"
+#else
+#define	L2TP_VENDOR	CT_VENDOR
+#endif
+#define L2TP_HOSTNAME	MODEL_NAME //2005-03-04 by kanki
diff --git a/tools/firmware-utils/src/linksys/typedefs.h b/tools/firmware-utils/src/linksys/typedefs.h
new file mode 100644
index 0000000000..78989745f9
--- /dev/null
+++ b/tools/firmware-utils/src/linksys/typedefs.h
@@ -0,0 +1,447 @@ 
+/*
+ * Copyright (C) 2009, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: typedefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
+ */
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+#ifdef SITE_TYPEDEFS
+
+/*
+ * Define SITE_TYPEDEFS in the compile to include a site-specific
+ * typedef file "site_typedefs.h".
+ *
+ * If SITE_TYPEDEFS is not defined, then the code section below makes
+ * inferences about the compile environment based on defined symbols and
+ * possibly compiler pragmas.
+ *
+ * Following these two sections is the Default Typedefs section.
+ * This section is only processed if USE_TYPEDEF_DEFAULTS is
+ * defined. This section has a default set of typedefs and a few
+ * preprocessor symbols (TRUE, FALSE, NULL, ...).
+ */
+
+#include "site_typedefs.h"
+
+#else
+
+/*
+ * Infer the compile environment based on preprocessor symbols and pragmas.
+ * Override type definitions as needed, and include configuration-dependent
+ * header files to define types.
+ */
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE	false
+#endif
+#ifndef TRUE
+#define TRUE	true
+#endif
+
+#else	/* ! __cplusplus */
+
+#if defined(_WIN32)
+
+#define TYPEDEF_BOOL
+typedef	unsigned char	bool;			/* consistent w/BOOL */
+
+#endif /* _WIN32 */
+
+#endif	/* ! __cplusplus */
+
+#if defined(_WIN64) && !defined(EFI)
+/* use the Windows ULONG_PTR type when compiling for 64 bit */
+#include <basetsd.h>
+#define TYPEDEF_UINTPTR
+typedef ULONG_PTR uintptr;
+#elif defined(__x86_64__)
+#define TYPEDEF_UINTPTR
+typedef unsigned long long int uintptr;
+#endif
+
+#if defined(_HNDRTE_) && !defined(_HNDRTE_SIM_)
+#define _NEED_SIZE_T_
+#endif
+
+#if defined(_MINOSL_)
+#define _NEED_SIZE_T_
+#endif
+
+#if defined(EFI) && !defined(_WIN64)
+#define _NEED_SIZE_T_
+#endif
+
+#if defined(TARGETOS_nucleus)
+/* for 'size_t' type */
+#include <stddef.h>
+
+/* float_t types conflict with the same typedefs from the standard ANSI-C
+** math.h header file. Don't re-typedef them here.
+*/
+#define TYPEDEF_FLOAT_T
+#endif   /* TARGETOS_nucleus */
+
+#if defined(_NEED_SIZE_T_)
+typedef long unsigned int size_t;
+#endif
+
+#ifdef __DJGPP__
+typedef long unsigned int size_t;
+#endif /* __DJGPP__ */
+
+#ifdef _MSC_VER	    /* Microsoft C */
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+typedef signed __int64	int64;
+typedef unsigned __int64 uint64;
+#endif
+
+#if defined(MACOSX)
+#ifdef KERNEL
+#include <libkern/version.h>
+#if VERSION_MAJOR > 10
+#define WLP2P
+#define IO80211P2P
+#define APSTA
+#define WLMCHAN
+#define WL_MULTIQUEUE
+#define WL_BSSCFG_TX_SUPR
+#define WIFI_ACT_FRAME
+#define FAST_ACTFRM_TX
+#endif
+#endif /* KERNEL */
+#define TYPEDEF_BOOL
+#endif
+
+#if defined(__NetBSD__)
+#define TYPEDEF_ULONG
+#endif
+
+#if defined(__sparc__)
+#define TYPEDEF_ULONG
+#endif
+
+
+#ifdef	linux
+/*
+ * If this is either a Linux hybrid build or the per-port code of a hybrid build
+ * then use the Linux header files to get some of the typedefs.  Otherwise, define
+ * them entirely in this file.  We can't always define the types because we get
+ * a duplicate typedef error; there is no way to "undefine" a typedef.
+ * We know when it's per-port code because each file defines LINUX_PORT at the top.
+ */
+#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
+#define TYPEDEF_UINT
+#ifndef TARGETENV_android
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+#endif /* TARGETENV_android */
+#ifdef __KERNEL__
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
+#define TYPEDEF_BOOL
+#endif	/* >= 2.6.19 */
+#endif	/* __KERNEL__ */
+#endif  /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
+#endif	/* linux */
+
+#if defined(__ECOS)
+#define TYPEDEF_UCHAR
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+#define TYPEDEF_BOOL
+#endif
+
+#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \
+	!defined(__DJGPP__) && !defined(__ECOS) && !defined(__BOB__) && \
+	!defined(TARGETOS_nucleus)
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#endif
+
+
+/* Do not support the (u)int64 types with strict ansi for GNU C */
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
+ * for signed or unsigned
+ */
+#if defined(__ICL)
+
+#define TYPEDEF_INT64
+
+#if defined(__STDC__)
+#define TYPEDEF_UINT64
+#endif
+
+#endif /* __ICL */
+
+#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && !defined(__DJGPP__) && \
+	!defined(__BOB__) && !defined(TARGETOS_nucleus)
+
+/* pick up ushort & uint from standard types.h */
+#if defined(linux) && defined(__KERNEL__)
+
+/* See note above */
+#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
+#ifdef USER_MODE
+#include <sys/types.h>
+#else
+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
+#endif /* USER_MODE */
+#endif /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
+
+#else
+
+#if defined(__ECOS)
+#include <pkgconf/infra.h>
+#include <cyg/infra/cyg_type.h>
+#include <stdarg.h>
+#endif
+
+#include <sys/types.h>
+
+#endif /* linux && __KERNEL__ */
+
+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_  && !_MINOSL_ && !__DJGPP__ */
+
+#if defined(MACOSX)
+
+#ifdef __BIG_ENDIAN__
+#define IL_BIGENDIAN
+#else
+#ifdef IL_BIGENDIAN
+#error "IL_BIGENDIAN was defined for a little-endian compile"
+#endif
+#endif /* __BIG_ENDIAN__ */
+
+#if !defined(__cplusplus)
+
+#if defined(__i386__)
+typedef unsigned char bool;
+#else
+typedef unsigned int bool;
+#endif
+#define TYPE_BOOL 1
+enum {
+    false	= 0,
+    true	= 1
+};
+
+#if defined(KERNEL)
+#include <IOKit/IOTypes.h>
+#endif /* KERNEL */
+
+#endif /* __cplusplus */
+
+#endif /* MACOSX */
+
+
+/* use the default typedefs in the next section of this file */
+#define USE_TYPEDEF_DEFAULTS
+
+#endif /* SITE_TYPEDEFS */
+
+
+/*
+ * Default Typedefs
+ */
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef	/* @abstract@ */ unsigned char	bool;
+#endif
+
+/* define uchar, ushort, uint, ulong */
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char	uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short	ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int	uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long	ulong;
+#endif
+
+/* define [u]int8/16/32/64, uintptr */
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char	uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short	uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int	uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_UINTPTR
+typedef unsigned int	uintptr;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char	int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short	int16;
+#endif
+
+#ifndef _SLHC_H
+#ifndef TYPEDEF_INT32
+typedef signed int	int32;
+#endif
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+/* define float32/64, float_t */
+
+#ifndef TYPEDEF_FLOAT32
+typedef float		float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double		float64;
+#endif
+
+/*
+ * abstracted floating point type allows for compile time selection of
+ * single or double precision arithmetic.  Compiling with -DFLOAT32
+ * selects single precision; the default is double precision.
+ */
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else /* default to double precision floating point */
+typedef float64 float_t;
+#endif
+
+#endif /* TYPEDEF_FLOAT_T */
+
+/* define macro values */
+
+#ifndef FALSE
+#define FALSE	0
+#endif
+
+#ifndef TRUE
+#define TRUE	1  /* TRUE */
+#endif
+
+#ifndef NULL
+#define	NULL	0
+#endif
+
+#ifndef OFF
+#define	OFF	0
+#endif
+
+#ifndef ON
+#define	ON	1  /* ON = 1 */
+#endif
+
+#define	AUTO	(-1) /* Auto = -1 */
+
+/* define PTRSZ, INLINE */
+
+#ifndef PTRSZ
+#define	PTRSZ	sizeof(char*)
+#endif
+
+
+/* Detect compiler type. */
+#ifdef _MSC_VER
+	#define BWL_COMPILER_MICROSOFT
+#elif defined(__GNUC__)
+	#define BWL_COMPILER_GNU
+#elif defined(__CC_ARM) && __CC_ARM
+	#define BWL_COMPILER_ARMCC
+#else
+	#error "Unknown compiler!"
+#endif /* _MSC_VER */
+
+
+#ifndef INLINE
+	#if defined(BWL_COMPILER_MICROSOFT)
+		#define INLINE __inline
+	#elif defined(BWL_COMPILER_GNU)
+		#define INLINE __inline__
+	#elif defined(BWL_COMPILER_ARMCC)
+		#define INLINE	__inline
+	#else
+		#define INLINE
+	#endif /* _MSC_VER */
+#endif /* INLINE */
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_UINTPTR
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+/* Suppress unused parameter warning */
+#define UNUSED_PARAMETER(x) (void)(x)
+
+/*
+ * Including the bcmdefs.h here, to make sure everyone including typedefs.h
+ * gets this automatically
+*/
+#include "bcmdefs.h"
+/*
+ * If android target is building then include this file
+ */
+#ifndef LINUX_HYBRID
+#ifdef TARGETENV_android
+#include <bcm_android_types.h>
+#endif /* TARGETENV_android */
+#endif /* LINUX_HYBRID */
+
+#endif /* _TYPEDEFS_H_ */