diff --git a/target/linux/ath79/config-4.14 b/target/linux/ath79/config-4.14
deleted file mode 100644
index 1ff3f1272844..000000000000
--- a/target/linux/ath79/config-4.14
+++ /dev/null
@@ -1,242 +0,0 @@
-CONFIG_AG71XX=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AG71XX_DEBUG_FS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ATH79=y
-CONFIG_ATH79_WDT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_RESET is not set
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PARSER_CYBERTAN=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_AR7100_USB is not set
-# CONFIG_PHY_AR7200_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_ATH79=y
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_RB4XX is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
diff --git a/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch b/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch
deleted file mode 100644
index 6c4b907e2201..000000000000
--- a/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 58812f6d0f1e11b03ed266038ed3b7274ab6f121 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:26:32 +0100
-Subject: [PATCH 01/27] tty: serial: drop QCA pecific SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/tty/serial/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1463,7 +1463,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
- 
- config SERIAL_AR933X
- 	tristate "AR933X serial port support"
--	depends on HAVE_CLK && SOC_AR933X
-+	depends on HAVE_CLK && ATH79
- 	select SERIAL_CORE
- 	help
- 	  If you have an Atheros AR933X SOC based board and want to use the
diff --git a/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch b/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch
deleted file mode 100644
index 36234d8d83ed..000000000000
--- a/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 5 Mar 2018 11:41:25 +0100
-Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout,
-then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/watchdog/ath79_wdt.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
- 
- static int ath79_wdt_set_timeout(int val)
- {
--	if (val < 1 || val > max_timeout)
-+	if (val < 1)
- 		return -EINVAL;
- 
--	timeout = val;
-+	if (val > max_timeout)
-+		timeout = max_timeout;
-+	else
-+		timeout = val;
-+
- 	ath79_wdt_keepalive();
- 
- 	return 0;
diff --git a/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch
deleted file mode 100644
index d15c77a8ddda..000000000000
--- a/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/leds/Kconfig      |  11 ++++
- drivers/leds/Makefile     |   1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -696,6 +696,17 @@ config LEDS_NIC78BX
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called leds-nic78bx.
- 
-+config LEDS_RESET
-+	tristate "LED support for reset-controller API"
-+	depends on LEDS_CLASS
-+	depends on RESET_CONTROLLER
-+	help
-+	  This option enables support for LEDs connected to pins driven by reset
-+	  controllers. Yes, DNI actual built HW like that.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+	struct led_classdev cdev;
-+	struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+			cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+	return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
-+{
-+	struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+	if (value == LED_OFF)
-+		reset_control_assert(led_dat->rst);
-+	else
-+		reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+	int num_leds;
-+	struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+	return sizeof(struct reset_leds_priv) +
-+		(sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fwnode_handle *child;
-+	struct reset_leds_priv *priv;
-+	int count, ret;
-+
-+	count = device_get_child_node_count(dev);
-+	if (!count)
-+		return ERR_PTR(-ENODEV);
-+
-+	priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+	if (!priv)
-+		return ERR_PTR(-ENOMEM);
-+
-+	device_for_each_child_node(dev, child) {
-+		struct reset_led_data *led = &priv->leds[priv->num_leds];
-+		struct device_node *np = to_of_node(child);
-+
-+		ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+		if (!led->cdev.name) {
-+			fwnode_handle_put(child);
-+			return ERR_PTR(-EINVAL);
-+		}
-+		led->rst = __of_reset_control_get(np, NULL, 0, 0, 0);
-+		if (IS_ERR(led->rst))
-+			return ERR_PTR(-EINVAL);
-+
-+		fwnode_property_read_string(child, "linux,default-trigger",
-+						&led->cdev.default_trigger);
-+
-+		led->cdev.brightness_set = reset_led_set;
-+		ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev);
-+		if (ret < 0)
-+			return ERR_PTR(ret);
-+		led->cdev.dev->of_node = np;
-+		priv->num_leds++;
-+	}
-+
-+	return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+	{ .compatible = "reset-leds", },
-+	{},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv;
-+
-+	priv = reset_leds_create(pdev);
-+	if (IS_ERR(priv))
-+		return PTR_ERR(priv);
-+
-+	platform_set_drvdata(pdev, priv);
-+
-+	return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+	int i;
-+
-+	for (i = 0; i < priv->num_leds; i++) {
-+		struct reset_led_data *led = &priv->leds[i];
-+
-+		if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+			reset_led_set(&led->cdev, LED_OFF);
-+	}
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+	.probe		= reset_led_probe,
-+	.shutdown	= reset_led_shutdown,
-+	.driver		= {
-+		.name	= "leds-reset",
-+		.of_match_table = of_reset_leds_match,
-+	},
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -73,6 +73,7 @@ obj-$(CONFIG_LEDS_PM8058)		+= leds-pm805
- obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
- obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
- obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
-+obj-$(CONFIG_LEDS_RESET)		+= leds-reset.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch
deleted file mode 100644
index 6280baf913ff..000000000000
--- a/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch
+++ /dev/null
@@ -1,320 +0,0 @@
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/Kconfig          |  16 ++++++
- drivers/phy/Makefile         |   2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -15,6 +15,22 @@ config GENERIC_PHY
- 	  phy users can obtain reference to the PHY. All the users of this
- 	  framework should select this config.
- 
-+config PHY_AR7100_USB
-+	tristate "Atheros AR7100 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select PHY_SIMPLE
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+	tristate "Atheros AR7200 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select PHY_SIMPLE
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
- 
- obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB)		+= phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB)		+= phy-ar7200-usb.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
- obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
- obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*rst_host;
-+	struct reset_control	*rst_ohci_dll;
-+	void __iomem		*io_base;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= reset_control_assert(priv->rst_host);
-+	err |= reset_control_assert(priv->rst_phy);
-+	err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+	return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= ar7100_usb_phy_power_off(phy);
-+	mdelay(100);
-+	err |= reset_control_deassert(priv->rst_ohci_dll);
-+	err |= reset_control_deassert(priv->rst_phy);
-+	err |= reset_control_deassert(priv->rst_host);
-+	mdelay(500);
-+	iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+	iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+	.power_on	= ar7100_usb_phy_power_on,
-+	.power_off	= ar7100_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct resource *res;
-+	struct ar7100_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->io_base))
-+		return PTR_ERR(priv->io_base);
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+	if (IS_ERR(priv->rst_host)) {
-+		dev_err(&pdev->dev, "host reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+	if (IS_ERR(priv->rst_ohci_dll)) {
-+		dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7100-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+	.probe	= ar7100_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7100_usb_phy_of_match,
-+		.name		= "ar7100-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,123 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*suspend_override;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->rst_phy)
-+		err = reset_control_deassert(priv->rst_phy);
-+	if (!err && priv->suspend_override)
-+		err = reset_control_assert(priv->suspend_override);
-+	if (err && priv->rst_phy)
-+		err = reset_control_assert(priv->rst_phy);
-+
-+	return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->suspend_override)
-+		err = reset_control_deassert(priv->suspend_override);
-+	if (priv->rst_phy)
-+		err |= reset_control_assert(priv->rst_phy);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+	.power_on	= ar7200_usb_phy_power_on,
-+	.power_off	= ar7200_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct ar7200_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->suspend_override = devm_reset_control_get_optional(
-+		&pdev->dev, "usb-suspend-override");
-+	if (IS_ERR(priv->suspend_override)) {
-+		if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+			priv->suspend_override = NULL;
-+		else
-+			return PTR_ERR(priv->suspend_override);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7200-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+	.probe	= ar7200_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7200_usb_phy_of_match,
-+		.name		= "ar7200-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch
deleted file mode 100644
index ec1bc3f7f706..000000000000
--- a/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -187,6 +187,11 @@ static int ehci_platform_probe(struct pl
- 	ehci = hcd_to_ehci(hcd);
- 
- 	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+		of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+		if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+			pdata->has_synopsys_hc_bug = 1;
-+
- 		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- 			ehci->big_endian_mmio = 1;
- 
diff --git a/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch b/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch
deleted file mode 100644
index a97fab71f49a..000000000000
--- a/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From bd17da5b6297e0e52b787049292d076ad415362a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:54 +0100
-Subject: [PATCH 06/27] usb: drop deprecated symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/Kconfig | 25 -------------------------
- 1 file changed, 25 deletions(-)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -297,19 +297,6 @@ config USB_CNS3XXX_EHCI
- 	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
- 	  support.
- 
--config USB_EHCI_ATH79
--	bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
--	depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
--	select USB_EHCI_ROOT_HUB_TT
--	select USB_EHCI_HCD_PLATFORM
--	default y
--	---help---
--	  This option is deprecated now and the driver was removed, use
--	  USB_EHCI_HCD_PLATFORM instead.
--
--	  Enables support for the built-in EHCI controller present
--	  on the Atheros AR7XXX/AR9XXX SoCs.
--
- config USB_EHCI_HCD_PLATFORM
- 	tristate "Generic EHCI driver for a platform device"
- 	default n
-@@ -493,18 +480,6 @@ config USB_OHCI_HCD_DAVINCI
- 	  controller. This driver cannot currently be a loadable
- 	  module because it lacks a proper PHY abstraction.
- 
--config USB_OHCI_ATH79
--	bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
--	depends on (SOC_AR71XX || SOC_AR724X)
--	select USB_OHCI_HCD_PLATFORM
--	default y
--	help
--	  This option is deprecated now and the driver was removed, use
--	  USB_OHCI_HCD_PLATFORM instead.
--
--	  Enables support for the built-in OHCI controller present on the
--	  Atheros AR71XX/AR7240 SoCs.
--
- config USB_OHCI_HCD_PPC_OF_BE
- 	bool "OHCI support for OF platform bus (big endian)"
- 	depends on PPC
diff --git a/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
deleted file mode 100644
index bd26107af528..000000000000
--- a/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/Makefile         |   1 +
- drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 143 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
- 
- obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79)			+= irq-ath79-intc.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,142 @@
-+/*
-+ *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ *  Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE	3
-+
-+struct ath79_intc {
-+	struct irq_chip chip;
-+	u32 irq;
-+	u32 pending_mask;
-+	u32 int_status;
-+	u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+	u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+	struct ath79_intc *intc = domain->host_data;
-+	u32 pending;
-+
-+	pending = ath79_reset_rr(intc->int_status);
-+	pending &= intc->pending_mask;
-+
-+	if (pending) {
-+		int i;
-+
-+		for (i = 0; i < domain->hwirq_max; i++)
-+			if (pending & intc->irq_mask[i]) {
-+				if (intc->irq_wb_chan[i] != 0xffffffff)
-+					ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
-+				generic_handle_irq(irq_find_mapping(domain, i));
-+			}
-+	} else {
-+		spurious_interrupt();
-+	}
-+}
-+
-+static void ath79_intc_irq_enable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	enable_irq(intc->irq);
-+}
-+
-+static void ath79_intc_irq_disable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	disable_irq(intc->irq);
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ath79_intc *intc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ath79_intc_map,
-+};
-+
-+static int __init ath79_intc_of_init(
-+	struct device_node *node, struct device_node *parent)
-+{
-+	struct irq_domain *domain;
-+	struct ath79_intc *intc;
-+	int cnt, cntwb, i, err;
-+
-+	cnt = of_property_count_u32_elems(node, "qca,pending-bits");
-+	if (cnt > ATH79_MAX_INTC_CASCADE)
-+		panic("Too many INTC pending bits\n");
-+
-+	intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+	if (!intc)
-+		panic("Failed to allocate INTC memory\n");
-+	intc->chip = dummy_irq_chip;
-+	intc->chip.name = "INTC";
-+	intc->chip.irq_disable = ath79_intc_irq_disable;
-+	intc->chip.irq_enable = ath79_intc_irq_enable;
-+
-+	if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
-+		panic("Missing address of interrupt status register\n");
-+	}
-+
-+	of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
-+	for (i = 0; i < cnt; i++) {
-+		intc->pending_mask |= intc->irq_mask[i];
-+		intc->irq_wb_chan[i] = 0xffffffff;
-+	}
-+
-+	cntwb = of_count_phandle_with_args(
-+		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-+
-+	for (i = 0; i < cntwb; i++) {
-+		struct of_phandle_args args;
-+		u32 irq = i;
-+
-+		of_property_read_u32_index(
-+			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-+		if (irq >= ATH79_MAX_INTC_CASCADE)
-+			continue;
-+
-+		err = of_parse_phandle_with_args(
-+			node, "qca,ddr-wb-channels",
-+			"#qca,ddr-wb-channel-cells",
-+			i, &args);
-+		if (err)
-+			return err;
-+
-+		intc->irq_wb_chan[irq] = args.args[0];
-+	}
-+
-+	intc->irq = irq_of_parse_and_map(node, 0);
-+	if (!intc->irq)
-+		panic("Failed to get INTC IRQ");
-+
-+	domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+	irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+	return 0;
-+}
-+IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
-+		ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
deleted file mode 100644
index b5ad731d06d6..000000000000
--- a/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- 		ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
--	irq_wb_chan[2] = irq_wb_chan2;
--	irq_wb_chan[3] = irq_wb_chan3;
--	mips_cpu_irq_init();
--}
diff --git a/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch b/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch
deleted file mode 100644
index a8092177b414..000000000000
--- a/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch
+++ /dev/null
@@ -1,980 +0,0 @@
-From e93fe20529aeb8738b87533f66c46e2c21524530 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 6 Mar 2018 10:06:10 +0100
-Subject: [PATCH 09/33] MIPS: ath79: add lots of missing registers
-
-This patch adds many new registers for various QCA MIPS SoCs. The patch is
-an aggragate of many contributions made to OpenWrt.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Henryk Heisig <hyniu@o2.pl>
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-Signed-off-by: Weijie Gao <hackpascal@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Julien Dusser <julien.dusser@free.fr>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 771 ++++++++++++++++++++++++-
- 1 file changed, 770 insertions(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -20,6 +20,10 @@
- #include <linux/bitops.h>
- 
- #define AR71XX_APB_BASE		0x18000000
-+#define AR71XX_GE0_BASE		0x19000000
-+#define AR71XX_GE0_SIZE		0x10000
-+#define AR71XX_GE1_BASE		0x1a000000
-+#define AR71XX_GE1_SIZE		0x10000
- #define AR71XX_EHCI_BASE	0x1b000000
- #define AR71XX_EHCI_SIZE	0x1000
- #define AR71XX_OHCI_BASE	0x1c000000
-@@ -39,6 +43,8 @@
- #define AR71XX_PLL_SIZE		0x100
- #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE	0x100
-+#define AR71XX_MII_BASE		(AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE		0x100
- 
- #define AR71XX_PCI_MEM_BASE	0x10000000
- #define AR71XX_PCI_MEM_SIZE	0x07000000
-@@ -81,18 +87,39 @@
- 
- #define AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE	0x14
-+#define AR933X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE	0x04
- #define AR933X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE	0x20000
- #define AR933X_EHCI_BASE	0x1b000000
- #define AR933X_EHCI_SIZE	0x1000
- 
-+#define AR934X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE	0x14
- #define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE	0x20000
- #define AR934X_EHCI_BASE	0x1b000000
- #define AR934X_EHCI_SIZE	0x200
-+#define AR934X_NFC_BASE		0x1b000200
-+#define AR934X_NFC_SIZE		0xb8
- #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE	0x1000
- 
-+#define QCA953X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define QCA953X_GMAC_SIZE	0x14
-+#define QCA953X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
-+#define QCA953X_WMAC_SIZE	0x20000
-+#define QCA953X_EHCI_BASE	0x1b000000
-+#define QCA953X_EHCI_SIZE	0x200
-+#define QCA953X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
-+#define QCA953X_SRIF_SIZE	0x1000
-+
-+#define QCA953X_PCI_CFG_BASE0	0x14000000
-+#define QCA953X_PCI_CTRL_BASE0	(AR71XX_APB_BASE + 0x000f0000)
-+#define QCA953X_PCI_CRP_BASE0	(AR71XX_APB_BASE + 0x000c0000)
-+#define QCA953X_PCI_MEM_BASE0	0x10000000
-+#define QCA953X_PCI_MEM_SIZE	0x02000000
-+
- #define QCA955X_PCI_MEM_BASE0	0x10000000
- #define QCA955X_PCI_MEM_BASE1	0x12000000
- #define QCA955X_PCI_MEM_SIZE	0x02000000
-@@ -106,11 +133,72 @@
- #define QCA955X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
- #define QCA955X_PCI_CTRL_SIZE	0x100
- 
-+#define QCA955X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE	0x40
- #define QCA955X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE	0x20000
- #define QCA955X_EHCI0_BASE	0x1b000000
- #define QCA955X_EHCI1_BASE	0x1b400000
- #define QCA955X_EHCI_SIZE	0x1000
-+#define QCA955X_NFC_BASE	0x1b800200
-+#define QCA955X_NFC_SIZE	0xb8
-+
-+#define QCA956X_PCI_MEM_BASE1	0x12000000
-+#define QCA956X_PCI_MEM_SIZE	0x02000000
-+#define QCA956X_PCI_CFG_BASE1	0x16000000
-+#define QCA956X_PCI_CFG_SIZE	0x1000
-+#define QCA956X_PCI_CRP_BASE1	(AR71XX_APB_BASE + 0x00250000)
-+#define QCA956X_PCI_CRP_SIZE	0x1000
-+#define QCA956X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
-+#define QCA956X_PCI_CTRL_SIZE	0x100
-+
-+#define QCA956X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
-+#define QCA956X_WMAC_SIZE	0x20000
-+#define QCA956X_EHCI0_BASE	0x1b000000
-+#define QCA956X_EHCI1_BASE	0x1b400000
-+#define QCA956X_EHCI_SIZE	0x200
-+#define QCA956X_GMAC_SGMII_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SGMII_SIZE	0x64
-+#define QCA956X_PLL_BASE	(AR71XX_APB_BASE + 0x00050000)
-+#define QCA956X_PLL_SIZE	0x50
-+#define QCA956X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SIZE	0x64
-+
-+/*
-+ * Hidden Registers
-+ */
-+#define QCA956X_MAC_CFG_BASE		0xb9000000
-+#define QCA956X_MAC_CFG_SIZE		0x64
-+
-+#define QCA956X_MAC_CFG1_REG		0x00
-+#define QCA956X_MAC_CFG1_SOFT_RST	BIT(31)
-+#define QCA956X_MAC_CFG1_RX_RST		BIT(19)
-+#define QCA956X_MAC_CFG1_TX_RST		BIT(18)
-+#define QCA956X_MAC_CFG1_LOOPBACK	BIT(8)
-+#define QCA956X_MAC_CFG1_RX_EN		BIT(2)
-+#define QCA956X_MAC_CFG1_TX_EN		BIT(0)
-+
-+#define QCA956X_MAC_CFG2_REG		0x04
-+#define QCA956X_MAC_CFG2_IF_1000	BIT(9)
-+#define QCA956X_MAC_CFG2_IF_10_100	BIT(8)
-+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN	BIT(5)
-+#define QCA956X_MAC_CFG2_LEN_CHECK	BIT(4)
-+#define QCA956X_MAC_CFG2_PAD_CRC_EN	BIT(2)
-+#define QCA956X_MAC_CFG2_FDX		BIT(0)
-+
-+#define QCA956X_MAC_MII_MGMT_CFG_REG	0x20
-+#define QCA956X_MGMT_CFG_CLK_DIV_20	0x07
-+
-+#define QCA956X_MAC_FIFO_CFG0_REG	0x48
-+#define QCA956X_MAC_FIFO_CFG1_REG	0x4c
-+#define QCA956X_MAC_FIFO_CFG2_REG	0x50
-+#define QCA956X_MAC_FIFO_CFG3_REG	0x54
-+#define QCA956X_MAC_FIFO_CFG4_REG	0x58
-+#define QCA956X_MAC_FIFO_CFG5_REG	0x5c
-+
-+#define QCA956X_DAM_RESET_OFFSET	0xb90001bc
-+#define QCA956X_DAM_RESET_SIZE		0x4
-+#define QCA956X_INLINE_CHKSUM_ENG	BIT(27)
- 
- /*
-  * DDR_CTRL block
-@@ -149,6 +237,12 @@
- #define AR934X_DDR_REG_FLUSH_PCIE	0xa8
- #define AR934X_DDR_REG_FLUSH_WMAC	0xac
- 
-+#define QCA953X_DDR_REG_FLUSH_GE0	0x9c
-+#define QCA953X_DDR_REG_FLUSH_GE1	0xa0
-+#define QCA953X_DDR_REG_FLUSH_USB	0xa4
-+#define QCA953X_DDR_REG_FLUSH_PCIE	0xa8
-+#define QCA953X_DDR_REG_FLUSH_WMAC	0xac
-+
- /*
-  * PLL block
-  */
-@@ -166,9 +260,15 @@
- #define AR71XX_AHB_DIV_SHIFT		20
- #define AR71XX_AHB_DIV_MASK		0x7
- 
-+#define AR71XX_ETH0_PLL_SHIFT		17
-+#define AR71XX_ETH1_PLL_SHIFT		19
-+
- #define AR724X_PLL_REG_CPU_CONFIG	0x00
- #define AR724X_PLL_REG_PCIE_CONFIG	0x10
- 
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS	BIT(16)
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET	BIT(25)
-+
- #define AR724X_PLL_FB_SHIFT		0
- #define AR724X_PLL_FB_MASK		0x3ff
- #define AR724X_PLL_REF_DIV_SHIFT	10
-@@ -178,6 +278,8 @@
- #define AR724X_DDR_DIV_SHIFT		22
- #define AR724X_DDR_DIV_MASK		0x3
- 
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK	0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG	0x00
- #define AR913X_PLL_REG_ETH_CONFIG	0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK	0x14
-@@ -190,6 +292,9 @@
- #define AR913X_AHB_DIV_SHIFT		19
- #define AR913X_AHB_DIV_MASK		0x1
- 
-+#define AR913X_ETH0_PLL_SHIFT		20
-+#define AR913X_ETH1_PLL_SHIFT		22
-+
- #define AR933X_PLL_CPU_CONFIG_REG	0x00
- #define AR933X_PLL_CLOCK_CTRL_REG	0x08
- 
-@@ -211,6 +316,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG		0x00
- #define AR934X_PLL_DDR_CONFIG_REG		0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG		0x2c
- 
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
-@@ -243,9 +350,52 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
- 
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
-+
-+#define QCA953X_PLL_CPU_CONFIG_REG		0x00
-+#define QCA953X_PLL_DDR_CONFIG_REG		0x04
-+#define QCA953X_PLL_CLK_CTRL_REG		0x08
-+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
-+#define QCA953X_PLL_ETH_XMII_CONTROL_REG	0x2c
-+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG	0x48
-+
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
-+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT	6
-+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK	0x3f
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK	0x7
-+
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
-+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT	10
-+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK	0x3f
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
-+
-+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
-+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
-+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
-+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL		BIT(20)
-+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
-+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG		0x00
- #define QCA955X_PLL_DDR_CONFIG_REG		0x04
- #define QCA955X_PLL_CLK_CTRL_REG		0x08
-+#define QCA955X_PLL_ETH_XMII_CONTROL_REG	0x28
-+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG	0x48
-+#define QCA955X_PLL_ETH_SGMII_SERDES_REG	0x4c
- 
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
-@@ -278,6 +428,81 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
- 
-+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT	BIT(2)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK		BIT(1)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL		BIT(0)
-+
-+#define QCA956X_PLL_CPU_CONFIG_REG			0x00
-+#define QCA956X_PLL_CPU_CONFIG1_REG			0x04
-+#define QCA956X_PLL_DDR_CONFIG_REG			0x08
-+#define QCA956X_PLL_DDR_CONFIG1_REG			0x0c
-+#define QCA956X_PLL_CLK_CTRL_REG			0x10
-+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG		0x28
-+#define QCA956X_PLL_ETH_XMII_CONTROL_REG		0x30
-+#define QCA956X_PLL_ETH_SGMII_SERDES_REG		0x4c
-+
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT		19
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK		0x7
-+
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT		0
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK		0x1f
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT		5
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK		0x1fff
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT		18
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK		0x1ff
-+
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT		16
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK		0x1f
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT		23
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK		0x7
-+
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT		0
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK		0x1f
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT		5
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK		0x1fff
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT		18
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK		0x1ff
-+
-+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
-+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
-+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL	BIT(20)
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL	BIT(21)
-+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
-+
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB		BIT(5)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1		BIT(6)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL		BIT(7)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK	 0xf
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP		BIT(12)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2		BIT(13)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1		BIT(14)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2		BIT(15)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE	BIT(16)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE		BIT(17)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL		BIT(18)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL		BIT(19)
-+
-+#define QCA956X_PLL_ETH_XMII_TX_INVERT			BIT(1)
-+#define QCA956X_PLL_ETH_XMII_GIGE			BIT(25)
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT		28
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK		0x3
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT		26
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK		3
-+
-+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT		BIT(2)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK			BIT(1)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL			BIT(0)
-+
- /*
-  * USB_CONFIG block
-  */
-@@ -317,10 +542,19 @@
- #define AR934X_RESET_REG_BOOTSTRAP		0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
- 
-+#define QCA953X_RESET_REG_RESET_MODULE		0x1c
-+#define QCA953X_RESET_REG_BOOTSTRAP		0xb0
-+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
-+
- #define QCA955X_RESET_REG_RESET_MODULE		0x1c
- #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
- 
-+#define QCA956X_RESET_REG_RESET_MODULE		0x1c
-+#define QCA956X_RESET_REG_BOOTSTRAP		0xb0
-+#define QCA956X_RESET_REG_EXT_INT_STATUS	0xac
-+
-+#define MISC_INT_MIPS_SI_TIMERINT_MASK	BIT(28)
- #define MISC_INT_ETHSW			BIT(12)
- #define MISC_INT_TIMER4			BIT(10)
- #define MISC_INT_TIMER3			BIT(9)
-@@ -370,16 +604,123 @@
- #define AR913X_RESET_USB_HOST		BIT(5)
- #define AR913X_RESET_USB_PHY		BIT(4)
- 
-+#define AR933X_RESET_GE1_MDIO		BIT(23)
-+#define AR933X_RESET_GE0_MDIO		BIT(22)
-+#define AR933X_RESET_GE1_MAC		BIT(13)
- #define AR933X_RESET_WMAC		BIT(11)
-+#define AR933X_RESET_GE0_MAC		BIT(9)
- #define AR933X_RESET_USB_HOST		BIT(5)
- #define AR933X_RESET_USB_PHY		BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE	BIT(3)
- 
-+#define AR934X_RESET_HOST		BIT(31)
-+#define AR934X_RESET_SLIC		BIT(30)
-+#define AR934X_RESET_HDMA		BIT(29)
-+#define AR934X_RESET_EXTERNAL		BIT(28)
-+#define AR934X_RESET_RTC		BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT	BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC		BIT(25)
-+#define AR934X_RESET_FULL_CHIP		BIT(24)
-+#define AR934X_RESET_GE1_MDIO		BIT(23)
-+#define AR934X_RESET_GE0_MDIO		BIT(22)
-+#define AR934X_RESET_CPU_NMI		BIT(21)
-+#define AR934X_RESET_CPU_COLD		BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT	BIT(19)
-+#define AR934X_RESET_PCIE_EP		BIT(18)
-+#define AR934X_RESET_UART1		BIT(17)
-+#define AR934X_RESET_DDR		BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF		BIT(14)
-+#define AR934X_RESET_GE1_MAC		BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG	BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG	BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT	BIT(10)
-+#define AR934X_RESET_GE0_MAC		BIT(9)
-+#define AR934X_RESET_ETH_SWITCH		BIT(8)
-+#define AR934X_RESET_PCIE_PHY		BIT(7)
-+#define AR934X_RESET_PCIE		BIT(6)
- #define AR934X_RESET_USB_HOST		BIT(5)
- #define AR934X_RESET_USB_PHY		BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE	BIT(3)
-+#define AR934X_RESET_LUT		BIT(2)
-+#define AR934X_RESET_MBOX		BIT(1)
-+#define AR934X_RESET_I2S		BIT(0)
-+
-+#define QCA953X_RESET_USB_EXT_PWR	BIT(29)
-+#define QCA953X_RESET_EXTERNAL		BIT(28)
-+#define QCA953X_RESET_RTC		BIT(27)
-+#define QCA953X_RESET_FULL_CHIP		BIT(24)
-+#define QCA953X_RESET_GE1_MDIO		BIT(23)
-+#define QCA953X_RESET_GE0_MDIO		BIT(22)
-+#define QCA953X_RESET_CPU_NMI		BIT(21)
-+#define QCA953X_RESET_CPU_COLD		BIT(20)
-+#define QCA953X_RESET_DDR		BIT(16)
-+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA953X_RESET_GE1_MAC		BIT(13)
-+#define QCA953X_RESET_ETH_SWITCH_ANALOG	BIT(12)
-+#define QCA953X_RESET_USB_PHY_ANALOG	BIT(11)
-+#define QCA953X_RESET_GE0_MAC		BIT(9)
-+#define QCA953X_RESET_ETH_SWITCH	BIT(8)
-+#define QCA953X_RESET_PCIE_PHY		BIT(7)
-+#define QCA953X_RESET_PCIE		BIT(6)
-+#define QCA953X_RESET_USB_HOST		BIT(5)
-+#define QCA953X_RESET_USB_PHY		BIT(4)
-+#define QCA953X_RESET_USBSUS_OVERRIDE	BIT(3)
-+
-+#define QCA955X_RESET_HOST		BIT(31)
-+#define QCA955X_RESET_SLIC		BIT(30)
-+#define QCA955X_RESET_HDMA		BIT(29)
-+#define QCA955X_RESET_EXTERNAL		BIT(28)
-+#define QCA955X_RESET_RTC		BIT(27)
-+#define QCA955X_RESET_PCIE_EP_INT	BIT(26)
-+#define QCA955X_RESET_CHKSUM_ACC	BIT(25)
-+#define QCA955X_RESET_FULL_CHIP		BIT(24)
-+#define QCA955X_RESET_GE1_MDIO		BIT(23)
-+#define QCA955X_RESET_GE0_MDIO		BIT(22)
-+#define QCA955X_RESET_CPU_NMI		BIT(21)
-+#define QCA955X_RESET_CPU_COLD		BIT(20)
-+#define QCA955X_RESET_HOST_RESET_INT	BIT(19)
-+#define QCA955X_RESET_PCIE_EP		BIT(18)
-+#define QCA955X_RESET_UART1		BIT(17)
-+#define QCA955X_RESET_DDR		BIT(16)
-+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA955X_RESET_NANDF		BIT(14)
-+#define QCA955X_RESET_GE1_MAC		BIT(13)
-+#define QCA955X_RESET_SGMII_ANALOG	BIT(12)
-+#define QCA955X_RESET_USB_PHY_ANALOG	BIT(11)
-+#define QCA955X_RESET_HOST_DMA_INT	BIT(10)
-+#define QCA955X_RESET_GE0_MAC		BIT(9)
-+#define QCA955X_RESET_SGMII		BIT(8)
-+#define QCA955X_RESET_PCIE_PHY		BIT(7)
-+#define QCA955X_RESET_PCIE		BIT(6)
-+#define QCA955X_RESET_USB_HOST		BIT(5)
-+#define QCA955X_RESET_USB_PHY		BIT(4)
-+#define QCA955X_RESET_USBSUS_OVERRIDE	BIT(3)
-+#define QCA955X_RESET_LUT		BIT(2)
-+#define QCA955X_RESET_MBOX		BIT(1)
-+#define QCA955X_RESET_I2S		BIT(0)
-+
-+#define QCA956X_RESET_EXTERNAL		BIT(28)
-+#define QCA956X_RESET_FULL_CHIP		BIT(24)
-+#define QCA956X_RESET_GE1_MDIO		BIT(23)
-+#define QCA956X_RESET_GE0_MDIO		BIT(22)
-+#define QCA956X_RESET_CPU_NMI		BIT(21)
-+#define QCA956X_RESET_CPU_COLD		BIT(20)
-+#define QCA956X_RESET_DMA		BIT(19)
-+#define QCA956X_RESET_DDR		BIT(16)
-+#define QCA956X_RESET_GE1_MAC		BIT(13)
-+#define QCA956X_RESET_SGMII_ANALOG	BIT(12)
-+#define QCA956X_RESET_USB_PHY_ANALOG	BIT(11)
-+#define QCA956X_RESET_GE0_MAC		BIT(9)
-+#define QCA956X_RESET_SGMII		BIT(8)
-+#define QCA956X_RESET_USB_HOST		BIT(5)
-+#define QCA956X_RESET_USB_PHY		BIT(4)
-+#define QCA956X_RESET_USBSUS_OVERRIDE	BIT(3)
-+#define QCA956X_RESET_SWITCH_ANALOG	BIT(2)
-+#define QCA956X_RESET_SWITCH		BIT(0)
- 
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN	BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY	BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
- 
- #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
-@@ -398,8 +739,17 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1		BIT(0)
- 
-+#define QCA953X_BOOTSTRAP_SW_OPTION2	BIT(12)
-+#define QCA953X_BOOTSTRAP_SW_OPTION1	BIT(11)
-+#define QCA953X_BOOTSTRAP_EJTAG_MODE	BIT(5)
-+#define QCA953X_BOOTSTRAP_REF_CLK_40	BIT(4)
-+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-+#define QCA953X_BOOTSTRAP_DDR1		BIT(0)
-+
- #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
- 
-+#define QCA956X_BOOTSTRAP_REF_CLK_40	BIT(2)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
-@@ -418,6 +768,24 @@
- 	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- 	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
- 
-+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP		BIT(3)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC		BIT(4)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0		BIT(5)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1		BIT(6)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2		BIT(7)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3		BIT(8)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
-+	(QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
-+	 QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
-+
-+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
-+	(QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
-+	 QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
-+	 QCA953X_PCIE_WMAC_INT_PCIE_RC3)
-+
- #define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
- #define QCA955X_EXT_INT_WMAC_TX			BIT(1)
- #define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
-@@ -449,6 +817,37 @@
- 	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- 	 QCA955X_EXT_INT_PCIE_RC2_INT3)
- 
-+#define QCA956X_EXT_INT_WMAC_MISC		BIT(0)
-+#define QCA956X_EXT_INT_WMAC_TX			BIT(1)
-+#define QCA956X_EXT_INT_WMAC_RXLP		BIT(2)
-+#define QCA956X_EXT_INT_WMAC_RXHP		BIT(3)
-+#define QCA956X_EXT_INT_PCIE_RC1		BIT(4)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT0		BIT(5)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT1		BIT(6)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT2		BIT(7)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT3		BIT(8)
-+#define QCA956X_EXT_INT_PCIE_RC2		BIT(12)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT0		BIT(13)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT1		BIT(14)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT2		BIT(15)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT3		BIT(16)
-+#define QCA956X_EXT_INT_USB1			BIT(24)
-+#define QCA956X_EXT_INT_USB2			BIT(28)
-+
-+#define QCA956X_EXT_INT_WMAC_ALL \
-+	(QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
-+	 QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
-+
-+#define QCA956X_EXT_INT_PCIE_RC1_ALL \
-+	(QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
-+	 QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
-+	 QCA956X_EXT_INT_PCIE_RC1_INT3)
-+
-+#define QCA956X_EXT_INT_PCIE_RC2_ALL \
-+	(QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
-+	 QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
-+	 QCA956X_EXT_INT_PCIE_RC2_INT3)
-+
- #define REV_ID_MAJOR_MASK		0xfff0
- #define REV_ID_MAJOR_AR71XX		0x00a0
- #define REV_ID_MAJOR_AR913X		0x00b0
-@@ -460,8 +859,12 @@
- #define REV_ID_MAJOR_AR9341		0x0120
- #define REV_ID_MAJOR_AR9342		0x1120
- #define REV_ID_MAJOR_AR9344		0x2120
-+#define REV_ID_MAJOR_QCA9533		0x0140
-+#define REV_ID_MAJOR_QCA9533_V2		0x0160
- #define REV_ID_MAJOR_QCA9556		0x0130
- #define REV_ID_MAJOR_QCA9558		0x1130
-+#define REV_ID_MAJOR_TP9343		0x0150
-+#define REV_ID_MAJOR_QCA956X		0x1150
- 
- #define AR71XX_REV_ID_MINOR_MASK	0x3
- #define AR71XX_REV_ID_MINOR_AR7130	0x0
-@@ -482,8 +885,12 @@
- 
- #define AR934X_REV_ID_REVISION_MASK	0xf
- 
-+#define QCA953X_REV_ID_REVISION_MASK	0xf
-+
- #define QCA955X_REV_ID_REVISION_MASK	0xf
- 
-+#define QCA956X_REV_ID_REVISION_MASK	0xf
-+
- /*
-  * SPI block
-  */
-@@ -521,15 +928,63 @@
- #define AR71XX_GPIO_REG_INT_ENABLE	0x24
- #define AR71XX_GPIO_REG_FUNC		0x28
- 
-+#define AR934X_GPIO_REG_OUT_FUNC0	0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1	0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2	0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3	0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4	0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5	0x40
- #define AR934X_GPIO_REG_FUNC		0x6c
- 
-+#define QCA953X_GPIO_REG_OUT_FUNC0	0x2c
-+#define QCA953X_GPIO_REG_OUT_FUNC1	0x30
-+#define QCA953X_GPIO_REG_OUT_FUNC2	0x34
-+#define QCA953X_GPIO_REG_OUT_FUNC3	0x38
-+#define QCA953X_GPIO_REG_OUT_FUNC4	0x3c
-+#define QCA953X_GPIO_REG_IN_ENABLE0	0x44
-+#define QCA953X_GPIO_REG_FUNC		0x6c
-+
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS1		10
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS2		11
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS0		9
-+#define QCA953X_GPIO_OUT_MUX_SPI_CLK		8
-+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI		12
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK1		41
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK2		42
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK3		43
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK4		44
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK5		45
-+
-+#define QCA955X_GPIO_REG_OUT_FUNC0	0x2c
-+#define QCA955X_GPIO_REG_OUT_FUNC1	0x30
-+#define QCA955X_GPIO_REG_OUT_FUNC2	0x34
-+#define QCA955X_GPIO_REG_OUT_FUNC3	0x38
-+#define QCA955X_GPIO_REG_OUT_FUNC4	0x3c
-+#define QCA955X_GPIO_REG_OUT_FUNC5	0x40
-+#define QCA955X_GPIO_REG_FUNC		0x6c
-+
-+#define QCA956X_GPIO_REG_OUT_FUNC0	0x2c
-+#define QCA956X_GPIO_REG_OUT_FUNC1	0x30
-+#define QCA956X_GPIO_REG_OUT_FUNC2	0x34
-+#define QCA956X_GPIO_REG_OUT_FUNC3	0x38
-+#define QCA956X_GPIO_REG_OUT_FUNC4	0x3c
-+#define QCA956X_GPIO_REG_OUT_FUNC5	0x40
-+#define QCA956X_GPIO_REG_IN_ENABLE0	0x44
-+#define QCA956X_GPIO_REG_IN_ENABLE3	0x50
-+#define QCA956X_GPIO_REG_FUNC		0x6c
-+
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDO	32
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDC	33
-+
- #define AR71XX_GPIO_COUNT		16
- #define AR7240_GPIO_COUNT		18
- #define AR7241_GPIO_COUNT		20
- #define AR913X_GPIO_COUNT		22
- #define AR933X_GPIO_COUNT		30
- #define AR934X_GPIO_COUNT		23
-+#define QCA953X_GPIO_COUNT		18
- #define QCA955X_GPIO_COUNT		24
-+#define QCA956X_GPIO_COUNT		23
- 
- /*
-  * SRIF block
-@@ -552,4 +1007,318 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
- 
-+#define QCA953X_SRIF_CPU_DPLL1_REG	0x1c0
-+#define QCA953X_SRIF_CPU_DPLL2_REG	0x1c4
-+#define QCA953X_SRIF_CPU_DPLL3_REG	0x1c8
-+
-+#define QCA953X_SRIF_DDR_DPLL1_REG	0x240
-+#define QCA953X_SRIF_DDR_DPLL2_REG	0x244
-+#define QCA953X_SRIF_DDR_DPLL3_REG	0x248
-+
-+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT	27
-+#define QCA953X_SRIF_DPLL1_REFDIV_MASK	0x1f
-+#define QCA953X_SRIF_DPLL1_NINT_SHIFT	18
-+#define QCA953X_SRIF_DPLL1_NINT_MASK	0x1ff
-+#define QCA953X_SRIF_DPLL1_NFRAC_MASK	0x0003ffff
-+
-+#define QCA953X_SRIF_DPLL2_LOCAL_PLL	BIT(30)
-+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT	13
-+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK	0x7
-+
-+#define AR71XX_GPIO_FUNC_STEREO_EN		BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN		BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN		BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN		BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN		BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN		BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN		BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN		BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN			BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN		BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN		BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN		BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN		BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN		BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN		BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN		BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN		BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN		BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN		BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN		BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN		BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN		BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN		BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN		BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN		BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK		BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN		BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN		BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN		BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN		BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL	BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL	BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT	BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN			BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN		BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
-+
-+#define AR934X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
-+#define AR934X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
-+#define AR934X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
-+#define AR934X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
-+#define AR934X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
-+#define AR934X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
-+#define AR934X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
-+#define AR934X_GPIO_FUNC_CLK_OBS0_EN		BIT(2)
-+#define AR934X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
-+
-+#define AR934X_GPIO_OUT_GPIO		0
-+#define AR934X_GPIO_OUT_SPI_CS1	7
-+#define AR934X_GPIO_OUT_LED_LINK0	41
-+#define AR934X_GPIO_OUT_LED_LINK1	42
-+#define AR934X_GPIO_OUT_LED_LINK2	43
-+#define AR934X_GPIO_OUT_LED_LINK3	44
-+#define AR934X_GPIO_OUT_LED_LINK4	45
-+#define AR934X_GPIO_OUT_EXT_LNA0	46
-+#define AR934X_GPIO_OUT_EXT_LNA1	47
-+
-+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
-+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
-+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
-+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
-+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
-+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
-+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
-+#define QCA955X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
-+
-+#define QCA955X_GPIO_OUT_GPIO		0
-+#define QCA955X_MII_EXT_MDI		1
-+#define QCA955X_SLIC_DATA_OUT		3
-+#define QCA955X_SLIC_PCM_FS		4
-+#define QCA955X_SLIC_PCM_CLK		5
-+#define QCA955X_SPI_CLK			8
-+#define QCA955X_SPI_CS_0		9
-+#define QCA955X_SPI_CS_1		10
-+#define QCA955X_SPI_CS_2		11
-+#define QCA955X_SPI_MISO		12
-+#define QCA955X_I2S_CLK			13
-+#define QCA955X_I2S_WS			14
-+#define QCA955X_I2S_SD			15
-+#define QCA955X_I2S_MCK			16
-+#define QCA955X_SPDIF_OUT		17
-+#define QCA955X_UART1_TD		18
-+#define QCA955X_UART1_RTS		19
-+#define QCA955X_UART1_RD		20
-+#define QCA955X_UART1_CTS		21
-+#define QCA955X_UART0_SOUT		22
-+#define QCA955X_SPDIF2_OUT		23
-+#define QCA955X_LED_SGMII_SPEED0	24
-+#define QCA955X_LED_SGMII_SPEED1	25
-+#define QCA955X_LED_SGMII_DUPLEX	26
-+#define QCA955X_LED_SGMII_LINK_UP	27
-+#define QCA955X_SGMII_SPEED0_INVERT	28
-+#define QCA955X_SGMII_SPEED1_INVERT	29
-+#define QCA955X_SGMII_DUPLEX_INVERT	30
-+#define QCA955X_SGMII_LINK_UP_INVERT	31
-+#define QCA955X_GE1_MII_MDO		32
-+#define QCA955X_GE1_MII_MDC		33
-+#define QCA955X_SWCOM2			38
-+#define QCA955X_SWCOM3			39
-+#define QCA955X_MAC2_GPIO		40
-+#define QCA955X_MAC3_GPIO		41
-+#define QCA955X_ATT_LED			42
-+#define QCA955X_PWR_LED			43
-+#define QCA955X_TX_FRAME		44
-+#define QCA955X_RX_CLEAR_EXTERNAL	45
-+#define QCA955X_LED_NETWORK_EN		46
-+#define QCA955X_LED_POWER_EN		47
-+#define QCA955X_WMAC_GLUE_WOW		68
-+#define QCA955X_RX_CLEAR_EXTENSION	70
-+#define QCA955X_CP_NAND_CS1		73
-+#define QCA955X_USB_SUSPEND		74
-+#define QCA955X_ETH_TX_ERR		75
-+#define QCA955X_DDR_DQ_OE		76
-+#define QCA955X_CLKREQ_N_EP		77
-+#define QCA955X_CLKREQ_N_RC		78
-+#define QCA955X_CLK_OBS0		79
-+#define QCA955X_CLK_OBS1		80
-+#define QCA955X_CLK_OBS2		81
-+#define QCA955X_CLK_OBS3		82
-+#define QCA955X_CLK_OBS4		83
-+#define QCA955X_CLK_OBS5		84
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL	0x00
-+#define AR71XX_MII_REG_MII1_CTRL	0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK		3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT	4
-+#define AR71XX_MII_CTRL_SPEED_MASK	3
-+#define AR71XX_MII_CTRL_SPEED_10	0
-+#define AR71XX_MII_CTRL_SPEED_100	1
-+#define AR71XX_MII_CTRL_SPEED_1000	2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII	0
-+#define AR71XX_MII0_CTRL_IF_MII		1
-+#define AR71XX_MII0_CTRL_IF_RGMII	2
-+#define AR71XX_MII0_CTRL_IF_RMII	3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII	0
-+#define AR71XX_MII1_CTRL_IF_RMII	1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG		0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0	BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0		BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0		BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER	BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN	BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP	BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0		BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10	0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100	BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG		0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0	BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0	BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0	BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER	BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE	BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN	BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE	BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP	BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS	BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0	BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
-+#define AR934X_ETH_CFG_RXD_DELAY        BIT(14)
-+#define AR934X_ETH_CFG_RXD_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT  14
-+#define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
-+#define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
-+
-+/*
-+ * QCA953X GMAC Interface
-+ */
-+#define QCA953X_GMAC_REG_ETH_CFG		0x00
-+
-+#define QCA953X_ETH_CFG_SW_ONLY_MODE		BIT(6)
-+#define QCA953X_ETH_CFG_SW_PHY_SWAP		BIT(7)
-+#define QCA953X_ETH_CFG_SW_APB_ACCESS		BIT(9)
-+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG	0x00
-+#define QCA955X_GMAC_REG_SGMII_SERDES	0x18
-+
-+#define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
-+#define QCA955X_ETH_CFG_MII_GE0		BIT(1)
-+#define QCA955X_ETH_CFG_GMII_GE0	BIT(2)
-+#define QCA955X_ETH_CFG_MII_GE0_MASTER	BIT(3)
-+#define QCA955X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
-+#define QCA955X_ETH_CFG_GE0_ERR_EN	BIT(5)
-+#define QCA955X_ETH_CFG_GE0_SGMII	BIT(6)
-+#define QCA955X_ETH_CFG_RMII_GE0	BIT(10)
-+#define QCA955X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
-+#define QCA955X_ETH_CFG_RMII_GE0_MASTER	BIT(12)
-+#define QCA955X_ETH_CFG_RXD_DELAY_MASK	0x3
-+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT	14
-+#define QCA955X_ETH_CFG_RDV_DELAY	BIT(16)
-+#define QCA955X_ETH_CFG_RDV_DELAY_MASK	0x3
-+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT	16
-+#define QCA955X_ETH_CFG_TXD_DELAY_MASK	0x3
-+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT	18
-+#define QCA955X_ETH_CFG_TXE_DELAY_MASK	0x3
-+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT	20
-+
-+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+/*
-+ * QCA956X GMAC Interface
-+ */
-+
-+#define QCA956X_GMAC_REG_ETH_CFG	0x00
-+#define QCA956X_GMAC_REG_SGMII_RESET	0x14
-+#define QCA956X_GMAC_REG_SGMII_SERDES	0x18
-+#define QCA956X_GMAC_REG_MR_AN_CONTROL	0x1c
-+#define QCA956X_GMAC_REG_SGMII_CONFIG	0x34
-+#define QCA956X_GMAC_REG_SGMII_DEBUG	0x58
-+
-+#define QCA956X_ETH_CFG_RGMII_EN		BIT(0)
-+#define QCA956X_ETH_CFG_GE0_SGMII		BIT(6)
-+#define QCA956X_ETH_CFG_SW_ONLY_MODE		BIT(7)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP		BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(9)
-+#define QCA956X_ETH_CFG_SW_APB_ACCESS		BIT(10)
-+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
-+#define QCA956X_ETH_CFG_RXD_DELAY_MASK		0x3
-+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT		14
-+#define QCA956X_ETH_CFG_RDV_DELAY_MASK		0x3
-+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT		16
-+
-+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET	0x0
-+#define QCA956X_SGMII_RESET_RX_CLK_N		BIT(0)
-+#define QCA956X_SGMII_RESET_TX_CLK_N		BIT(1)
-+#define QCA956X_SGMII_RESET_RX_125M_N		BIT(2)
-+#define QCA956X_SGMII_RESET_TX_125M_N		BIT(3)
-+#define QCA956X_SGMII_RESET_HW_RX_125M_N	BIT(4)
-+
-+#define QCA956X_SGMII_SERDES_CDR_BW_MASK	0x3
-+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT	1
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK	0x7
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT	4
-+#define QCA956X_SGMII_SERDES_PLL_BW		BIT(8)
-+#define QCA956X_SGMII_SERDES_VCO_FAST		BIT(9)
-+#define QCA956X_SGMII_SERDES_VCO_SLOW		BIT(10)
-+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
-+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT	BIT(16)
-+#define QCA956X_SGMII_SERDES_FIBER_SDO		BIT(17)
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT	27
-+#define QCA956X_SGMII_SERDES_VCO_REG_MASK	0xf
-+
-+#define QCA956X_MR_AN_CONTROL_AN_ENABLE		BIT(12)
-+#define QCA956X_MR_AN_CONTROL_PHY_RESET		BIT(15)
-+
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT	0
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK	0x7
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ath79/patches-4.14/0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch b/target/linux/ath79/patches-4.14/0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch
deleted file mode 100644
index 1a87f52d1872..000000000000
--- a/target/linux/ath79/patches-4.14/0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch
+++ /dev/null
@@ -1,400 +0,0 @@
-From 2741304648dbdab7697d7758166a582b5291c53d Mon Sep 17 00:00:00 2001
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Sat, 23 Jun 2018 15:08:56 +0200
-Subject: [PATCH 10/33] MIPS: ath79: add support for QCA953x QCA956x TP9343
-
-This patch adds support for 2 new types of QCA silicon. TP9343 is
-essentially the same as the QCA956X but is licensed by TPLink.
-
-Signed-off-by: Weijie Gao <hackpascal@gmail.com>
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c                  | 193 +++++++++++++++++++++++++++++++
- arch/mips/ath79/common.c                 |   8 ++
- arch/mips/ath79/early_printk.c           |   4 +
- arch/mips/ath79/setup.c                  |  34 +++++-
- arch/mips/include/asm/mach-ath79/ath79.h |  33 ++++++
- 5 files changed, 269 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -355,6 +355,91 @@ static void __init ar934x_clocks_init(vo
- 	iounmap(dpll_base);
- }
- 
-+static void __init qca953x_clocks_init(void)
-+{
-+	unsigned long ref_rate;
-+	unsigned long cpu_rate;
-+	unsigned long ddr_rate;
-+	unsigned long ahb_rate;
-+	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+	u32 cpu_pll, ddr_pll;
-+	u32 bootstrap;
-+
-+	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+	if (bootstrap &	QCA953X_BOOTSTRAP_REF_CLK_40)
-+		ref_rate = 40 * 1000 * 1000;
-+	else
-+		ref_rate = 25 * 1000 * 1000;
-+
-+	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+		  QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
-+	nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+	       QCA953X_PLL_CPU_CONFIG_NINT_MASK;
-+	frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+	       QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+	cpu_pll = nint * ref_rate / ref_div;
-+	cpu_pll += frac * (ref_rate >> 6) / ref_div;
-+	cpu_pll /= (1 << out_div);
-+
-+	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+		  QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
-+	nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+	       QCA953X_PLL_DDR_CONFIG_NINT_MASK;
-+	frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+	       QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+	ddr_pll = nint * ref_rate / ref_div;
-+	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
-+	ddr_pll /= (1 << out_div);
-+
-+	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+
-+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+		cpu_rate = ref_rate;
-+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+		cpu_rate = cpu_pll / (postdiv + 1);
-+	else
-+		cpu_rate = ddr_pll / (postdiv + 1);
-+
-+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+		  QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+		ddr_rate = ref_rate;
-+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+		ddr_rate = ddr_pll / (postdiv + 1);
-+	else
-+		ddr_rate = cpu_pll / (postdiv + 1);
-+
-+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+		  QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+		ahb_rate = ref_rate;
-+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+		ahb_rate = ddr_pll / (postdiv + 1);
-+	else
-+		ahb_rate = cpu_pll / (postdiv + 1);
-+
-+	ath79_add_sys_clkdev("ref", ref_rate);
-+	ath79_add_sys_clkdev("cpu", cpu_rate);
-+	ath79_add_sys_clkdev("ddr", ddr_rate);
-+	ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+	clk_add_alias("wdt", NULL, "ref", NULL);
-+	clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- static void __init qca955x_clocks_init(void)
- {
- 	unsigned long ref_rate;
-@@ -440,6 +525,110 @@ static void __init qca955x_clocks_init(v
- 	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
-+static void __init qca956x_clocks_init(void)
-+{
-+	unsigned long ref_rate;
-+	unsigned long cpu_rate;
-+	unsigned long ddr_rate;
-+	unsigned long ahb_rate;
-+	u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
-+	u32 cpu_pll, ddr_pll;
-+	u32 bootstrap;
-+
-+	/*
-+	 * QCA956x timer init workaround has to be applied right before setting
-+	 * up the clock. Else, there will be no jiffies
-+	 */
-+	u32 misc;
-+
-+	misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
-+	misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
-+	ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
-+
-+	bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+	if (bootstrap &	QCA956X_BOOTSTRAP_REF_CLK_40)
-+		ref_rate = 40 * 1000 * 1000;
-+	else
-+		ref_rate = 25 * 1000 * 1000;
-+
-+	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-+
-+	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
-+	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
-+	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-+	       QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
-+	lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
-+	       QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
-+
-+	cpu_pll = nint * ref_rate / ref_div;
-+	cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
-+	cpu_pll /= (1 << out_div);
-+
-+	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-+	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
-+	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
-+	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-+	       QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
-+	lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
-+	       QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
-+
-+	ddr_pll = nint * ref_rate / ref_div;
-+	ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
-+	ddr_pll /= (1 << out_div);
-+
-+	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+
-+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+		cpu_rate = ref_rate;
-+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
-+		cpu_rate = ddr_pll / (postdiv + 1);
-+	else
-+		cpu_rate = cpu_pll / (postdiv + 1);
-+
-+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+		  QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+		ddr_rate = ref_rate;
-+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
-+		ddr_rate = cpu_pll / (postdiv + 1);
-+	else
-+		ddr_rate = ddr_pll / (postdiv + 1);
-+
-+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+		  QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+		ahb_rate = ref_rate;
-+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+		ahb_rate = ddr_pll / (postdiv + 1);
-+	else
-+		ahb_rate = cpu_pll / (postdiv + 1);
-+
-+	ath79_add_sys_clkdev("ref", ref_rate);
-+	ath79_add_sys_clkdev("cpu", cpu_rate);
-+	ath79_add_sys_clkdev("ddr", ddr_rate);
-+	ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+	clk_add_alias("wdt", NULL, "ref", NULL);
-+	clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- void __init ath79_clocks_init(void)
- {
- 	if (soc_is_ar71xx())
-@@ -450,8 +639,12 @@ void __init ath79_clocks_init(void)
- 		ar933x_clocks_init();
- 	else if (soc_is_ar934x())
- 		ar934x_clocks_init();
-+	else if (soc_is_qca953x())
-+		qca953x_clocks_init();
- 	else if (soc_is_qca955x())
- 		qca955x_clocks_init();
-+	else if (soc_is_qca956x() || soc_is_tp9343())
-+		qca956x_clocks_init();
- 	else
- 		BUG();
- }
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -103,8 +103,12 @@ void ath79_device_reset_set(u32 mask)
- 		reg = AR933X_RESET_REG_RESET_MODULE;
- 	else if (soc_is_ar934x())
- 		reg = AR934X_RESET_REG_RESET_MODULE;
-+	else if (soc_is_qca953x())
-+		reg = QCA953X_RESET_REG_RESET_MODULE;
- 	else if (soc_is_qca955x())
- 		reg = QCA955X_RESET_REG_RESET_MODULE;
-+	else if (soc_is_qca956x() || soc_is_tp9343())
-+		reg = QCA956X_RESET_REG_RESET_MODULE;
- 	else
- 		BUG();
- 
-@@ -131,8 +135,12 @@ void ath79_device_reset_clear(u32 mask)
- 		reg = AR933X_RESET_REG_RESET_MODULE;
- 	else if (soc_is_ar934x())
- 		reg = AR934X_RESET_REG_RESET_MODULE;
-+	else if (soc_is_qca953x())
-+		reg = QCA953X_RESET_REG_RESET_MODULE;
- 	else if (soc_is_qca955x())
- 		reg = QCA955X_RESET_REG_RESET_MODULE;
-+	else if (soc_is_qca956x() || soc_is_tp9343())
-+		reg = QCA956X_RESET_REG_RESET_MODULE;
- 	else
- 		BUG();
- 
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -76,8 +76,12 @@ static void prom_putchar_init(void)
- 	case REV_ID_MAJOR_AR9341:
- 	case REV_ID_MAJOR_AR9342:
- 	case REV_ID_MAJOR_AR9344:
-+	case REV_ID_MAJOR_QCA9533:
-+	case REV_ID_MAJOR_QCA9533_V2:
- 	case REV_ID_MAJOR_QCA9556:
- 	case REV_ID_MAJOR_QCA9558:
-+	case REV_ID_MAJOR_TP9343:
-+	case REV_ID_MAJOR_QCA956X:
- 		_prom_putchar = prom_putchar_ar71xx;
- 		break;
- 
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
- 	u32 major;
- 	u32 minor;
- 	u32 rev = 0;
-+	u32 ver = 1;
- 
- 	id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
- 	major = id & REV_ID_MAJOR_MASK;
-@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type
- 		rev = id & AR934X_REV_ID_REVISION_MASK;
- 		break;
- 
-+	case REV_ID_MAJOR_QCA9533_V2:
-+		ver = 2;
-+		ath79_soc_rev = 2;
-+		/* drop through */
-+
-+	case REV_ID_MAJOR_QCA9533:
-+		ath79_soc = ATH79_SOC_QCA9533;
-+		chip = "9533";
-+		rev = id & QCA953X_REV_ID_REVISION_MASK;
-+		break;
-+
- 	case REV_ID_MAJOR_QCA9556:
- 		ath79_soc = ATH79_SOC_QCA9556;
- 		chip = "9556";
-@@ -164,14 +176,30 @@ static void __init ath79_detect_sys_type
- 		rev = id & QCA955X_REV_ID_REVISION_MASK;
- 		break;
- 
-+	case REV_ID_MAJOR_QCA956X:
-+		ath79_soc = ATH79_SOC_QCA956X;
-+		chip = "956X";
-+		rev = id & QCA956X_REV_ID_REVISION_MASK;
-+		break;
-+
-+	case REV_ID_MAJOR_TP9343:
-+		ath79_soc = ATH79_SOC_TP9343;
-+		chip = "9343";
-+		rev = id & QCA956X_REV_ID_REVISION_MASK;
-+		break;
-+
- 	default:
- 		panic("ath79: unknown SoC, id:0x%08x", id);
- 	}
- 
--	ath79_soc_rev = rev;
-+	if (ver == 1)
-+		ath79_soc_rev = rev;
- 
--	if (soc_is_qca955x())
--		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
-+	if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
-+		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
-+			chip, ver, rev);
-+	else if (soc_is_tp9343())
-+		sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
- 			chip, rev);
- 	else
- 		sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,8 +32,11 @@ enum ath79_soc_type {
- 	ATH79_SOC_AR9341,
- 	ATH79_SOC_AR9342,
- 	ATH79_SOC_AR9344,
-+	ATH79_SOC_QCA9533,
- 	ATH79_SOC_QCA9556,
- 	ATH79_SOC_QCA9558,
-+	ATH79_SOC_TP9343,
-+	ATH79_SOC_QCA956X,
- };
- 
- extern enum ath79_soc_type ath79_soc;
-@@ -100,6 +103,16 @@ static inline int soc_is_ar934x(void)
- 	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
- 
-+static inline int soc_is_qca9533(void)
-+{
-+	return ath79_soc == ATH79_SOC_QCA9533;
-+}
-+
-+static inline int soc_is_qca953x(void)
-+{
-+	return soc_is_qca9533();
-+}
-+
- static inline int soc_is_qca9556(void)
- {
- 	return ath79_soc == ATH79_SOC_QCA9556;
-@@ -115,6 +128,26 @@ static inline int soc_is_qca955x(void)
- 	return soc_is_qca9556() || soc_is_qca9558();
- }
- 
-+static inline int soc_is_tp9343(void)
-+{
-+	return ath79_soc == ATH79_SOC_TP9343;
-+}
-+
-+static inline int soc_is_qca9561(void)
-+{
-+	return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca9563(void)
-+{
-+	return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca956x(void)
-+{
-+	return soc_is_qca9561() || soc_is_qca9563();
-+}
-+
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
- 
diff --git a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch b/target/linux/ath79/patches-4.14/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
deleted file mode 100644
index c50a473307c9..000000000000
--- a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 0c8856211d26f84277f7fcb0b9595e5c646bc464 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:00:55 +0100
-Subject: [PATCH 11/33] MIPS: ath79: select the PINCTRL subsystem
-
-The pinmux on QCA SoCs is controlled by a single register. The
-"pinctrl-single" driver can be used but requires the target
-to select PINCTRL.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -192,6 +192,7 @@ config ATH79
- 	select CSRC_R4K
- 	select DMA_NONCOHERENT
- 	select GPIOLIB
-+	select PINCTRL
- 	select HAVE_CLK
- 	select COMMON_CLK
- 	select CLKDEV_LOOKUP
diff --git a/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch b/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch
deleted file mode 100644
index 534111c2b0ed..000000000000
--- a/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 30dc99e95ac4410072850ae466f696cb56097bb4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 5 Mar 2018 11:35:29 +0100
-Subject: [PATCH 14/33] MIPS: ath79: finetune cpu-overrides
-
-This patch adds a few additional cpu feature overrides so that they do not
-need to be probed at runtime.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -36,6 +36,7 @@
- #define cpu_has_mdmx		0
- #define cpu_has_mips3d		0
- #define cpu_has_smartmips	0
-+#define cpu_has_rixi		0
- 
- #define cpu_has_mips32r1	1
- #define cpu_has_mips32r2	1
-@@ -43,6 +44,7 @@
- #define cpu_has_mips64r2	0
- 
- #define cpu_has_mipsmt		0
-+#define cpu_has_userlocal	0
- 
- #define cpu_has_64bits		0
- #define cpu_has_64bit_zero_reg	0
-@@ -51,5 +53,9 @@
- 
- #define cpu_dcache_line_size()	32
- #define cpu_icache_line_size()	32
-+#define cpu_has_vtag_icache	0
-+#define cpu_has_dc_aliases	1
-+#define cpu_has_ic_fills_f_dc	0
-+#define cpu_has_pindexed_dcache	0
- 
- #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch b/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch
deleted file mode 100644
index eaa960a6e679..000000000000
--- a/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From f55a400f4a691f3750eaf7bfcd6ecbf7ed1622f0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 5 Mar 2018 11:38:21 +0100
-Subject: [PATCH 15/33] MIPS: ath79: enable uart during early_prink
-
-This patch ensures, that the poinmux register is properly setup for the
-boot console uart when early_printk is enabled.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/early_printk.c | 44 +++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 43 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned
- 	/* nothing to do */
- }
- 
-+static void prom_enable_uart(u32 id)
-+{
-+	void __iomem *gpio_base;
-+	u32 uart_en;
-+	u32 t;
-+
-+	switch (id) {
-+	case REV_ID_MAJOR_AR71XX:
-+		uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+		break;
-+
-+	case REV_ID_MAJOR_AR7240:
-+	case REV_ID_MAJOR_AR7241:
-+	case REV_ID_MAJOR_AR7242:
-+		uart_en = AR724X_GPIO_FUNC_UART_EN;
-+		break;
-+
-+	case REV_ID_MAJOR_AR913X:
-+		uart_en = AR913X_GPIO_FUNC_UART_EN;
-+		break;
-+
-+	case REV_ID_MAJOR_AR9330:
-+	case REV_ID_MAJOR_AR9331:
-+		uart_en = AR933X_GPIO_FUNC_UART_EN;
-+		break;
-+
-+	case REV_ID_MAJOR_AR9341:
-+	case REV_ID_MAJOR_AR9342:
-+	case REV_ID_MAJOR_AR9344:
-+		/* TODO */
-+	default:
-+		return;
-+	}
-+
-+	gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+	t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+	t |= uart_en;
-+	__raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- 	void __iomem *base;
-@@ -92,8 +132,10 @@ static void prom_putchar_init(void)
- 
- 	default:
- 		_prom_putchar = prom_putchar_dummy;
--		break;
-+		return;
- 	}
-+
-+	prom_enable_uart(id);
- }
- 
- void prom_putchar(unsigned char ch)
diff --git a/target/linux/ath79/patches-4.14/0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch b/target/linux/ath79/patches-4.14/0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch
deleted file mode 100644
index 05f15b1df7ec..000000000000
--- a/target/linux/ath79/patches-4.14/0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From d3fa9694bc71338161ae2b9c7ee08b57b8140f93 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Tue, 6 Mar 2018 08:37:43 +0100
-Subject: [PATCH 16/33] MIPS: ath79: get PCIe controller out of reset
-
-The ar724x pci driver expects the PCIe controller to be brought out of
-reset by the bootloader.
-
-At least the AVM Fritz 300E bootloader doesn't take care of releasing
-the different PCIe controller related resets which causes an endless
-hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
-Application Control register (0x180f0000) is read from.
-
-Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
-host controller is still in reset during probing.
-
-The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
-set to ready. It has been shown that 10ms might not be enough time if
-PCIe should be used right after setting the bit. During my tests it
-took up to 20ms till the link was up. Giving the link up to 100ms
-should work for all cases.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -12,14 +12,18 @@
- #include <linux/irq.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- 
-+#define AR724X_PCI_REG_APP		0x00
- #define AR724X_PCI_REG_RESET		0x18
- #define AR724X_PCI_REG_INT_STATUS	0x4c
- #define AR724X_PCI_REG_INT_MASK		0x50
- 
-+#define AR724X_PCI_APP_LTSSM_ENABLE	BIT(0)
-+
- #define AR724X_PCI_RESET_LINK_UP	BIT(0)
- 
- #define AR724X_PCI_INT_DEV0		BIT(14)
-@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
- 					 apc);
- }
- 
-+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
-+{
-+	u32 ppl, app;
-+	int wait = 0;
-+
-+	/* deassert PCIe host controller and PCIe PHY reset */
-+	ath79_device_reset_clear(AR724X_RESET_PCIE);
-+	ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+
-+	/* remove the reset of the PCIE PLL */
-+	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+	/* deassert bypass for the PCIE PLL */
-+	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+	/* set PCIE Application Control to ready */
-+	app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-+	app |= AR724X_PCI_APP_LTSSM_ENABLE;
-+	__raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
-+
-+	/* wait up to 100ms for PHY link up */
-+	do {
-+		mdelay(10);
-+		wait++;
-+	} while (wait < 10 && !ar724x_pci_check_link(apc));
-+}
-+
- static int ar724x_pci_probe(struct platform_device *pdev)
- {
- 	struct ar724x_pci_controller *apc;
-@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
- 	apc->pci_controller.io_resource = &apc->io_res;
- 	apc->pci_controller.mem_resource = &apc->mem_res;
- 
-+	/*
-+	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-+	 * host controller is in reset.
-+	 */
-+	if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+		ar724x_pci_hw_init(apc);
-+
- 	apc->link_up = ar724x_pci_check_link(apc);
- 	if (!apc->link_up)
- 		dev_warn(&pdev->dev, "PCIe link is down\n");
diff --git a/target/linux/ath79/patches-4.14/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-4.14/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
deleted file mode 100644
index bf7eb691a5db..000000000000
--- a/target/linux/ath79/patches-4.14/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:10 +0200
-Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7100-pci.txt    | 38 ++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-@@ -0,0 +1,38 @@
-+* Qualcomm Atheros AR7100 PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7100-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+Optional properties:
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+* Example for ar7100
-+	pcie-controller@180c0000 {
-+		compatible = "qca,ar7100-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x17010000 0x100>;
-+		reg-names = "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <2>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-4.14/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-4.14/0018-MIPS-pci-ar71xx-convert-to-OF.patch
deleted file mode 100644
index 91796a12f049..000000000000
--- a/target/linux/ath79/patches-4.14/0018-MIPS-pci-ar71xx-convert-to-OF.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:23 +0200
-Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
- 1 file changed, 41 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -18,8 +18,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -49,12 +52,13 @@
- #define AR71XX_PCI_IRQ_COUNT		5
- 
- struct ar71xx_pci_controller {
-+	struct device_node *np;
- 	void __iomem *cfg_base;
- 	int irq;
--	int irq_base;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
-+	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = {
- 
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar71xx_pci_controller *apc;
- 	void __iomem *base = ath79_reset_base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--
-+	chained_irq_enter(chip, desc);
- 	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- 		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 
- 	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(apc->irq_base + 1);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(apc->irq_base + 2);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
- 
- 	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(apc->irq_base + 4);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
- 
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -294,24 +299,31 @@ static struct irq_chip ar71xx_pci_irq_ch
- 	.irq_mask_ack	= ar71xx_pci_irq_mask,
- };
- 
-+static int ar71xx_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar71xx_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- 	void __iomem *base = ath79_reset_base;
--	int i;
- 
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
- 
--	BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
--	apc->irq_base = ATH79_PCI_IRQ_BASE;
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+					    &ar71xx_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- 					 apc);
- }
-@@ -328,6 +340,11 @@ static void ar71xx_pci_reset(void)
- 	mdelay(100);
- }
- 
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+	{ .compatible = "qca,ar7100-pci" },
-+	{},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- 	struct ar71xx_pci_controller *apc;
-@@ -348,26 +365,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -380,9 +377,11 @@ static int ar71xx_pci_probe(struct platf
- 
- 	ar71xx_pci_irq_init(apc);
- 
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
- 	apc->pci_ctrl.io_resource = &apc->io_res;
-+	pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-@@ -393,6 +392,7 @@ static struct platform_driver ar71xx_pci
- 	.probe = ar71xx_pci_probe,
- 	.driver = {
- 		.name = "ar71xx-pci",
-+		.of_match_table = of_match_ptr(ar71xx_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-4.14/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-4.14/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
deleted file mode 100644
index a0af79cb4da9..000000000000
--- a/target/linux/ath79/patches-4.14/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:02 +0200
-Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7240-pci.txt    | 42 ++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-@@ -0,0 +1,42 @@
-+* Qualcomm Atheros AR724X PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7240-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "crp_base"	Configuration registers
-+	- "ctrl_base"	Control registers
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+Optional properties:
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+* Example for qca9557
-+	pcie-controller@180c0000 {
-+		compatible = "qcom,ar7240-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x180c0000 0x1000>,
-+		      <0x180f0000 0x100>,
-+		      <0x14000000 0x1000>;
-+		reg-names = "crp_base", "ctrl_base", "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&intc2>;
-+		interrupts = <1>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-4.14/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-4.14/0020-MIPS-pci-ar724x-convert-to-OF.patch
deleted file mode 100644
index 936bfd48164f..000000000000
--- a/target/linux/ath79/patches-4.14/0020-MIPS-pci-ar724x-convert-to-OF.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:37 +0200
-Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -14,8 +14,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #define AR724X_PCI_REG_APP		0x00
- #define AR724X_PCI_REG_RESET		0x18
-@@ -45,17 +48,20 @@ struct ar724x_pci_controller {
- 	void __iomem *crp_base;
- 
- 	int irq;
--	int irq_base;
- 
- 	bool link_up;
- 	bool bar0_is_cached;
- 	u32  bar0_value;
- 
-+	struct device_node *np;
- 	struct pci_controller pci_controller;
-+	struct irq_domain *domain;
- 	struct resource io_res;
- 	struct resource mem_res;
- };
- 
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- 	u32 reset;
-@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = {
- 
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar724x_pci_controller *apc;
--	void __iomem *base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--	base = apc->ctrl_base;
--
--	pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
--		  __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+	chained_irq_enter(chip, desc);
-+	pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+		  __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
- 
- 	if (pending & AR724X_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
--
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -305,26 +305,34 @@ static struct irq_chip ar724x_pci_irq_ch
- 	.irq_mask_ack	= ar724x_pci_irq_mask,
- };
- 
-+static int ar724x_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar724x_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- 				int id)
- {
- 	void __iomem *base;
--	int i;
- 
- 	base = apc->ctrl_base;
- 
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
- 
--	apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, 2,
-+					    &ar724x_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- 					 apc);
- }
-@@ -394,29 +402,11 @@ static int ar724x_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_controller.pci_ops = &ar724x_pci_ops;
- 	apc->pci_controller.io_resource = &apc->io_res;
- 	apc->pci_controller.mem_resource = &apc->mem_res;
-+	pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
- 
- 	/*
- 	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -438,10 +428,16 @@ static int ar724x_pci_probe(struct platf
- 	return 0;
- }
- 
-+static const struct of_device_id ar724x_pci_ids[] = {
-+	{ .compatible = "qcom,ar7240-pci" },
-+	{},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- 	.probe = ar724x_pci_probe,
- 	.driver = {
- 		.name = "ar724x-pci",
-+		.of_match_table = of_match_ptr(ar724x_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-4.14/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch b/target/linux/ath79/patches-4.14/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
deleted file mode 100644
index c273140dfc43..000000000000
--- a/target/linux/ath79/patches-4.14/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 288a8eb0d41f09fda242e05f8a7bd1f5b3489477 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:19:26 +0100
-Subject: [PATCH 21/33] MIPS: ath79: add helpers for setting clocks and expose
- the ref clock
-
-Preparation for transitioning the legacy clock setup code over
-to OF.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c               | 128 ++++++++++++++++++----------------
- include/dt-bindings/clock/ath79-clk.h |   3 +-
- 2 files changed, 68 insertions(+), 63 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -37,20 +37,46 @@ static struct clk_onecell_data clk_data
- 	.clk_num = ARRAY_SIZE(clks),
- };
- 
--static struct clk *__init ath79_add_sys_clkdev(
--	const char *id, unsigned long rate)
-+static const char * const clk_names[ATH79_CLK_END] = {
-+	[ATH79_CLK_CPU] = "cpu",
-+	[ATH79_CLK_DDR] = "ddr",
-+	[ATH79_CLK_AHB] = "ahb",
-+	[ATH79_CLK_REF] = "ref",
-+};
-+
-+static const char * __init ath79_clk_name(int type)
- {
--	struct clk *clk;
--	int err;
-+	BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
-+	return clk_names[type];
-+}
- 
--	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
-+{
- 	if (IS_ERR(clk))
--		panic("failed to allocate %s clock structure", id);
-+		panic("failed to allocate %s clock structure", clk_names[type]);
- 
--	err = clk_register_clkdev(clk, id, NULL);
--	if (err)
--		panic("unable to register %s clock device", id);
-+	clks[type] = clk;
-+	clk_register_clkdev(clk, name, NULL);
-+}
- 
-+static struct clk * __init ath79_set_clk(int type, unsigned long rate)
-+{
-+	const char *name = ath79_clk_name(type);
-+	struct clk *clk;
-+
-+	clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
-+	__ath79_set_clk(type, name, clk);
-+	return clk;
-+}
-+
-+static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
-+					    unsigned int mult, unsigned int div)
-+{
-+	const char *name = ath79_clk_name(type);
-+	struct clk *clk;
-+
-+	clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
-+	__ath79_set_clk(type, name, clk);
- 	return clk;
- }
- 
-@@ -80,27 +106,15 @@ static void __init ar71xx_clocks_init(vo
- 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- 	ahb_rate = cpu_rate / div;
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
--static struct clk * __init ath79_reg_ffclk(const char *name,
--		const char *parent_name, unsigned int mult, unsigned int div)
--{
--	struct clk *clk;
--
--	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
--	if (IS_ERR(clk))
--		panic("failed to allocate %s clock structure", name);
--
--	return clk;
--}
--
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
- {
- 	u32 pll;
-@@ -114,24 +128,19 @@ static void __init ar724x_clk_init(struc
- 	ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
- 	ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
- 
--	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
--	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
--	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
-+	ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
-+	ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
-+	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
- static void __init ar724x_clocks_init(void)
- {
- 	struct clk *ref_clk;
- 
--	ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
-+	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
- 	ar724x_clk_init(ref_clk, ath79_pll_base);
- 
--	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
--	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ahb", NULL);
- }
-@@ -186,12 +195,12 @@ static void __init ar9330_clk_init(struc
- 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
- 	}
- 
--	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
--					ninit_mul, ref_div * out_div * cpu_div);
--	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
--					ninit_mul, ref_div * out_div * ddr_div);
--	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
--					ninit_mul, ref_div * out_div * ahb_div);
-+	ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
-+			 ref_div * out_div * cpu_div);
-+	ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
-+			 ref_div * out_div * ddr_div);
-+	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
-+			 ref_div * out_div * ahb_div);
- }
- 
- static void __init ar933x_clocks_init(void)
-@@ -206,15 +215,10 @@ static void __init ar933x_clocks_init(vo
- 	else
- 		ref_rate = (25 * 1000 * 1000);
- 
--	ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
-+	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 
- 	ar9330_clk_init(ref_clk, ath79_pll_base);
- 
--	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
--	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
- }
-@@ -344,10 +348,10 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -431,10 +435,10 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	ath79_add_sys_clkdev("cpu", cpu_rate);
--	ath79_add_sys_clkdev("ddr", ddr_rate);
--	ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -516,10 +520,10 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -620,10 +624,10 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	ath79_add_sys_clkdev("cpu", cpu_rate);
--	ath79_add_sys_clkdev("ddr", ddr_rate);
--	ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -13,7 +13,8 @@
- #define ATH79_CLK_CPU		0
- #define ATH79_CLK_DDR		1
- #define ATH79_CLK_AHB		2
-+#define ATH79_CLK_REF		3
- 
--#define ATH79_CLK_END		3
-+#define ATH79_CLK_END		4
- 
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.14/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch b/target/linux/ath79/patches-4.14/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
deleted file mode 100644
index 389edc45a840..000000000000
--- a/target/linux/ath79/patches-4.14/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 339c191a95e978353c9ba3aafab0261e14de109b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:22:43 +0100
-Subject: [PATCH 22/33] MIPS: ath79: move legacy "wdt" and "uart" clock aliases
- out of soc init
-
-Preparation for reusing functions for DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 38 +++++++++++++++++---------------------
- 1 file changed, 17 insertions(+), 21 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -110,9 +110,6 @@ static void __init ar71xx_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -140,9 +137,6 @@ static void __init ar724x_clocks_init(vo
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
- 	ar724x_clk_init(ref_clk, ath79_pll_base);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -218,9 +212,6 @@ static void __init ar933x_clocks_init(vo
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 
- 	ar9330_clk_init(ref_clk, ath79_pll_base);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
-@@ -353,9 +344,6 @@ static void __init ar934x_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
--
- 	iounmap(dpll_base);
- }
- 
-@@ -439,9 +427,6 @@ static void __init qca953x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static void __init qca955x_clocks_init(void)
-@@ -524,9 +509,6 @@ static void __init qca955x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static void __init qca956x_clocks_init(void)
-@@ -628,13 +610,13 @@ static void __init qca956x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- void __init ath79_clocks_init(void)
- {
-+	const char *wdt;
-+	const char *uart;
-+
- 	if (soc_is_ar71xx())
- 		ar71xx_clocks_init();
- 	else if (soc_is_ar724x() || soc_is_ar913x())
-@@ -651,6 +633,20 @@ void __init ath79_clocks_init(void)
- 		qca956x_clocks_init();
- 	else
- 		BUG();
-+
-+	if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
-+		wdt = "ahb";
-+		uart = "ahb";
-+	} else if (soc_is_ar933x()) {
-+		wdt = "ahb";
-+		uart = "ref";
-+	} else {
-+		wdt = "ref";
-+		uart = "ref";
-+	}
-+
-+	clk_add_alias("wdt", NULL, wdt, NULL);
-+	clk_add_alias("uart", NULL, uart, NULL);
- }
- 
- unsigned long __init
diff --git a/target/linux/ath79/patches-4.14/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch b/target/linux/ath79/patches-4.14/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
deleted file mode 100644
index 6c0f2ad54c57..000000000000
--- a/target/linux/ath79/patches-4.14/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 6350b2c36c522fecbc91a80b63f49319dafd2a72 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:23:20 +0100
-Subject: [PATCH 23/33] MIPS: ath79: pass PLL base to clock init functions
-
-Preparation for passing the mapped base via DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++-------------------------
- 1 file changed, 30 insertions(+), 30 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_
- 	return clk;
- }
- 
--static void __init ar71xx_clocks_init(void)
-+static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(vo
- 
- 	ref_rate = AR71XX_BASE_FREQ;
- 
--	pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
-+	pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
- 
- 	div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
- 	freq = div * ref_rate;
-@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struc
- 	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
--static void __init ar724x_clocks_init(void)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
- 	struct clk *ref_clk;
- 
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
--	ar724x_clk_init(ref_clk, ath79_pll_base);
-+	ar724x_clk_init(ref_clk, pll_base);
- }
- 
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struc
- 			 ref_div * out_div * ahb_div);
- }
- 
--static void __init ar933x_clocks_init(void)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
- 	struct clk *ref_clk;
- 	unsigned long ref_rate;
-@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u3
- 	return ret;
- }
- 
--static void __init ar934x_clocks_init(void)
-+static void __init ar934x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(vo
- 			  AR934X_SRIF_DPLL1_REFDIV_MASK;
- 		frac = 1 << 18;
- 	} else {
--		pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+		pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
- 		out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 			AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 		ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(vo
- 			  AR934X_SRIF_DPLL1_REFDIV_MASK;
- 		frac = 1 << 18;
- 	} else {
--		pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+		pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
- 		out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 			  AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 		ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(vo
- 	ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
- 				      nfrac, frac, out_div);
- 
--	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(vo
- 	iounmap(dpll_base);
- }
- 
--static void __init qca953x_clocks_init(void)
-+static void __init qca953x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(v
- 	cpu_pll += frac * (ref_rate >> 6) / ref_div;
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(v
- 	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init qca955x_clocks_init(void)
-+static void __init qca955x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(v
- 	cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(v
- 	ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init qca956x_clocks_init(void)
-+static void __init qca956x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
- 
--	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
- 	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
- 	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
- 	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(v
- 	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- 		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
--	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
- 	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
- 	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
- 	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(v
- 	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void)
- 	const char *uart;
- 
- 	if (soc_is_ar71xx())
--		ar71xx_clocks_init();
-+		ar71xx_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar724x() || soc_is_ar913x())
--		ar724x_clocks_init();
-+		ar724x_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar933x())
--		ar933x_clocks_init();
-+		ar933x_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar934x())
--		ar934x_clocks_init();
-+		ar934x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca953x())
--		qca953x_clocks_init();
-+		qca953x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca955x())
--		qca955x_clocks_init();
-+		qca955x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca956x() || soc_is_tp9343())
--		qca956x_clocks_init();
-+		qca956x_clocks_init(ath79_pll_base);
- 	else
- 		BUG();
- 
diff --git a/target/linux/ath79/patches-4.14/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch b/target/linux/ath79/patches-4.14/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
deleted file mode 100644
index 9ceb64380396..000000000000
--- a/target/linux/ath79/patches-4.14/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 5fadb2544ed0bb72ddddd846aa303bb9ed2d211c Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:24:07 +0100
-Subject: [PATCH 24/33] MIPS: ath79: make specifying the reference clock in DT
- optional
-
-It can be autodetected for many SoCs using the strapping options.
-If the clock is specified in DT, the autodetected value is ignored
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 84 +++++++++++++++++++++++--------------------------
- 1 file changed, 40 insertions(+), 44 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,6 +80,18 @@ static struct clk * __init ath79_set_ff_
- 	return clk;
- }
- 
-+static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
-+{
-+	struct clk *clk = clks[ATH79_CLK_REF];
-+
-+	if (clk)
-+		rate = clk_get_rate(clk);
-+	else
-+		clk = ath79_set_clk(ATH79_CLK_REF, rate);
-+
-+	return rate;
-+}
-+
- static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
-@@ -90,7 +102,7 @@ static void __init ar71xx_clocks_init(vo
- 	u32 freq;
- 	u32 div;
- 
--	ref_rate = AR71XX_BASE_FREQ;
-+	ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
- 
- 	pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
- 
-@@ -106,16 +118,17 @@ static void __init ar71xx_clocks_init(vo
- 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- 	ahb_rate = cpu_rate / div;
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
--	u32 pll;
- 	u32 mult, div, ddr_div, ahb_div;
-+	u32 pll;
-+
-+	ath79_setup_ref_clk(AR71XX_BASE_FREQ);
- 
- 	pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
- 
-@@ -130,17 +143,9 @@ static void __init ar724x_clk_init(struc
- 	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
--static void __init ar724x_clocks_init(void __iomem *pll_base)
--{
--	struct clk *ref_clk;
--
--	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
--
--	ar724x_clk_init(ref_clk, pll_base);
--}
--
--static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
-+	unsigned long ref_rate;
- 	u32 clock_ctrl;
- 	u32 ref_div;
- 	u32 ninit_mul;
-@@ -149,6 +154,15 @@ static void __init ar9330_clk_init(struc
- 	u32 cpu_div;
- 	u32 ddr_div;
- 	u32 ahb_div;
-+	u32 t;
-+
-+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-+		ref_rate = (40 * 1000 * 1000);
-+	else
-+		ref_rate = (25 * 1000 * 1000);
-+
-+	ath79_setup_ref_clk(ref_rate);
- 
- 	clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
- 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-@@ -197,23 +211,6 @@ static void __init ar9330_clk_init(struc
- 			 ref_div * out_div * ahb_div);
- }
- 
--static void __init ar933x_clocks_init(void __iomem *pll_base)
--{
--	struct clk *ref_clk;
--	unsigned long ref_rate;
--	u32 t;
--
--	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
--	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
--		ref_rate = (40 * 1000 * 1000);
--	else
--		ref_rate = (25 * 1000 * 1000);
--
--	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
--
--	ar9330_clk_init(ref_clk, ath79_pll_base);
--}
--
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
- 				      u32 frac, u32 out_div)
- {
-@@ -253,6 +250,8 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
- 	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
- 		out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-@@ -339,7 +338,6 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -363,6 +361,8 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -423,7 +423,6 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -445,6 +444,8 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -505,7 +506,6 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -537,6 +537,8 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -606,7 +608,6 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -682,10 +683,8 @@ static void __init ath79_clocks_init_dt_
- 	void __iomem *pll_base;
- 
- 	ref_clk = of_clk_get(np, 0);
--	if (IS_ERR(ref_clk)) {
--		pr_err("%pOF: of_clk_get failed\n", np);
--		goto err;
--	}
-+	if (!IS_ERR(ref_clk))
-+		clks[ATH79_CLK_REF] = ref_clk;
- 
- 	pll_base = of_iomap(np, 0);
- 	if (!pll_base) {
-@@ -694,9 +693,9 @@ static void __init ath79_clocks_init_dt_
- 	}
- 
- 	if (of_device_is_compatible(np, "qca,ar9130-pll"))
--		ar724x_clk_init(ref_clk, pll_base);
-+		ar724x_clocks_init(pll_base);
- 	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
--		ar9330_clk_init(ref_clk, pll_base);
-+		ar933x_clocks_init(pll_base);
- 	else {
- 		pr_err("%pOF: could not find any appropriate clk_init()\n", np);
- 		goto err_iounmap;
-@@ -714,9 +713,6 @@ err_iounmap:
- 
- err_clk:
- 	clk_put(ref_clk);
--
--err:
--	return;
- }
- CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
- CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
diff --git a/target/linux/ath79/patches-4.14/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch b/target/linux/ath79/patches-4.14/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
deleted file mode 100644
index 13f46a91464f..000000000000
--- a/target/linux/ath79/patches-4.14/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 6325626de001df98aebe51f3008b1aca05798d19 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:26:27 +0100
-Subject: [PATCH 25/33] MIPS: ath79: support setting up clock via DT on all SoC
- types
-
-Use the same functions as the legacy code
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 39 ++++++++++++++++++++++-----------------
- 1 file changed, 22 insertions(+), 17 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -669,16 +669,6 @@ ath79_get_sys_clk_rate(const char *id)
- #ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
--	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
--}
--
--CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
--
--static void __init ath79_clocks_init_dt_ng(struct device_node *np)
--{
- 	struct clk *ref_clk;
- 	void __iomem *pll_base;
- 
-@@ -692,14 +682,21 @@ static void __init ath79_clocks_init_dt_
- 		goto err_clk;
- 	}
- 
--	if (of_device_is_compatible(np, "qca,ar9130-pll"))
-+	if (of_device_is_compatible(np, "qca,ar7100-pll"))
-+		ar71xx_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
-+		 of_device_is_compatible(np, "qca,ar9130-pll"))
- 		ar724x_clocks_init(pll_base);
- 	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
- 		ar933x_clocks_init(pll_base);
--	else {
--		pr_err("%pOF: could not find any appropriate clk_init()\n", np);
--		goto err_iounmap;
--	}
-+	else if (of_device_is_compatible(np, "qca,ar9340-pll"))
-+		ar934x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9530-pll"))
-+		qca953x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9550-pll"))
-+		qca955x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9560-pll"))
-+		qca956x_clocks_init(pll_base);
- 
- 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- 		pr_err("%pOF: could not register clk provider\n", np);
-@@ -714,6 +711,14 @@ err_iounmap:
- err_clk:
- 	clk_put(ref_clk);
- }
--CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
--CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
-+
-+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
-+
- #endif
diff --git a/target/linux/ath79/patches-4.14/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch b/target/linux/ath79/patches-4.14/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
deleted file mode 100644
index 27adb56f560c..000000000000
--- a/target/linux/ath79/patches-4.14/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 78538d673801902108797f2c813e70cfbce280c9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:27:28 +0100
-Subject: [PATCH 26/33] MIPS: ath79: export switch MDIO reference clock
-
-On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
-clock. If that feature is not used, it defaults to the main reference
-clock, like on all other SoC.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c               | 8 ++++++++
- include/dt-bindings/clock/ath79-clk.h | 3 ++-
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7
- 	[ATH79_CLK_DDR] = "ddr",
- 	[ATH79_CLK_AHB] = "ahb",
- 	[ATH79_CLK_REF] = "ref",
-+	[ATH79_CLK_MDIO] = "mdio",
- };
- 
- static const char * __init ath79_clk_name(int type)
-@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
-+	clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
-+	if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
-+		ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-+
- 	iounmap(dpll_base);
- }
- 
-@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt(
- 	else if (of_device_is_compatible(np, "qca,qca9560-pll"))
- 		qca956x_clocks_init(pll_base);
- 
-+	if (!clks[ATH79_CLK_MDIO])
-+		clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-+
- 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- 		pr_err("%pOF: could not register clk provider\n", np);
- 		goto err_iounmap;
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -14,7 +14,8 @@
- #define ATH79_CLK_DDR		1
- #define ATH79_CLK_AHB		2
- #define ATH79_CLK_REF		3
-+#define ATH79_CLK_MDIO		4
- 
--#define ATH79_CLK_END		4
-+#define ATH79_CLK_END		5
- 
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-legacy-IRQ-code.patch b/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
deleted file mode 100644
index 6586f0843141..000000000000
--- a/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
+++ /dev/null
@@ -1,233 +0,0 @@
-From 3765b1f79593a0a9098ed15e48074c95403a53ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:08 +0200
-Subject: [PATCH 27/33] MIPS: ath79: drop legacy IRQ code
-
-With the target now being fully OF based, we can drop the legacy IRQ code.
-All IRQs are now handled via the new irqchip drivers.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile                 |   2 +-
- arch/mips/ath79/irq.c                    | 169 -------------------------------
- arch/mips/ath79/setup.c                  |   6 ++
- arch/mips/include/asm/mach-ath79/ath79.h |   4 -
- 4 files changed, 7 insertions(+), 174 deletions(-)
- delete mode 100644 arch/mips/ath79/irq.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -8,7 +8,7 @@
- # under the terms of the GNU General Public License version 2 as published
- # by the Free Software Foundation.
- 
--obj-y	:= prom.o setup.o irq.o common.o clock.o
-+obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
- obj-$(CONFIG_PCI)			+= pci.o
---- a/arch/mips/ath79/irq.c
-+++ /dev/null
-@@ -1,169 +0,0 @@
--/*
-- *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
-- *
-- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/irqchip.h>
--#include <linux/of_irq.h>
--
--#include <asm/irq_cpu.h>
--#include <asm/mipsregs.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "machtypes.h"
--
--
--static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
--
--	if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
--		ath79_ddr_wb_flush(3);
--		generic_handle_irq(ATH79_IP2_IRQ(0));
--	} else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
--		ath79_ddr_wb_flush(4);
--		generic_handle_irq(ATH79_IP2_IRQ(1));
--	} else {
--		spurious_interrupt();
--	}
--}
--
--static void ar934x_ip2_irq_init(void)
--{
--	int i;
--
--	for (i = ATH79_IP2_IRQ_BASE;
--	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
--}
--
--static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
--	status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
--
--	if (status == 0) {
--		spurious_interrupt();
--		return;
--	}
--
--	if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP2_IRQ(0));
--	}
--
--	if (status & QCA955X_EXT_INT_WMAC_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP2_IRQ(1));
--	}
--}
--
--static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
--	status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
--		  QCA955X_EXT_INT_USB1 |
--		  QCA955X_EXT_INT_USB2;
--
--	if (status == 0) {
--		spurious_interrupt();
--		return;
--	}
--
--	if (status & QCA955X_EXT_INT_USB1) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(0));
--	}
--
--	if (status & QCA955X_EXT_INT_USB2) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(1));
--	}
--
--	if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(2));
--	}
--}
--
--static void qca955x_irq_init(void)
--{
--	int i;
--
--	for (i = ATH79_IP2_IRQ_BASE;
--	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
--
--	for (i = ATH79_IP3_IRQ_BASE;
--	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
--}
--
--void __init arch_init_irq(void)
--{
--	unsigned irq_wb_chan2 = -1;
--	unsigned irq_wb_chan3 = -1;
--	bool misc_is_ar71xx;
--
--	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
--		irqchip_init();
--		return;
--	}
--
--	if (soc_is_ar71xx() || soc_is_ar724x() ||
--	    soc_is_ar913x() || soc_is_ar933x()) {
--		irq_wb_chan2 = 3;
--		irq_wb_chan3 = 2;
--	} else if (soc_is_ar934x()) {
--		irq_wb_chan3 = 2;
--	}
--
--	ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
--
--	if (soc_is_ar71xx() || soc_is_ar913x())
--		misc_is_ar71xx = true;
--	else if (soc_is_ar724x() ||
--		 soc_is_ar933x() ||
--		 soc_is_ar934x() ||
--		 soc_is_qca955x())
--		misc_is_ar71xx = false;
--	else
--		BUG();
--	ath79_misc_irq_init(
--		ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
--		ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
--
--	if (soc_is_ar934x())
--		ar934x_ip2_irq_init();
--	else if (soc_is_qca955x())
--		qca955x_irq_init();
--}
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -19,6 +19,7 @@
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/of_fdt.h>
-+#include <linux/irqchip.h>
- 
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
-@@ -305,6 +306,11 @@ void __init plat_time_init(void)
- 	mips_hpt_frequency = cpu_clk_rate / 2;
- }
- 
-+void __init arch_init_irq(void)
-+{
-+	irqchip_init();
-+}
-+
- static int __init ath79_setup(void)
- {
- 	if  (mips_machtype == ATH79_MACH_GENERIC_OF)
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigne
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
- 
--void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
--void ath79_misc_irq_init(void __iomem *regs, int irq,
--			int irq_base, bool is_ar71xx);
--
- #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ath79/patches-4.14/0028-MIPS-ath79-drop-machfiles.patch b/target/linux/ath79/patches-4.14/0028-MIPS-ath79-drop-machfiles.patch
deleted file mode 100644
index bb5acde8bb9f..000000000000
--- a/target/linux/ath79/patches-4.14/0028-MIPS-ath79-drop-machfiles.patch
+++ /dev/null
@@ -1,1042 +0,0 @@
-From badf28957b6dc400dff27bd23ba2ae75d9514be5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:04:09 +0200
-Subject: [PATCH 28/33] MIPS: ath79: drop machfiles
-
-With the target now being fully OF based, we can drop the legacy mach
-files. Boards can now boot fully of devicetree files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig              |   1 -
- arch/mips/ath79/Kconfig        |  73 -------------------
- arch/mips/ath79/Makefile       |  10 ---
- arch/mips/ath79/clock.c        |   1 -
- arch/mips/ath79/mach-ap121.c   |  92 ------------------------
- arch/mips/ath79/mach-ap136.c   | 156 -----------------------------------------
- arch/mips/ath79/mach-ap81.c    | 100 --------------------------
- arch/mips/ath79/mach-db120.c   | 136 -----------------------------------
- arch/mips/ath79/mach-pb44.c    | 128 ---------------------------------
- arch/mips/ath79/mach-ubnt-xm.c | 126 ---------------------------------
- arch/mips/ath79/machtypes.h    |  28 --------
- arch/mips/ath79/setup.c        |  77 +++-----------------
- 12 files changed, 9 insertions(+), 919 deletions(-)
- delete mode 100644 arch/mips/ath79/mach-ap121.c
- delete mode 100644 arch/mips/ath79/mach-ap136.c
- delete mode 100644 arch/mips/ath79/mach-ap81.c
- delete mode 100644 arch/mips/ath79/mach-db120.c
- delete mode 100644 arch/mips/ath79/mach-pb44.c
- delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
- delete mode 100644 arch/mips/ath79/machtypes.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -197,7 +197,6 @@ config ATH79
- 	select COMMON_CLK
- 	select CLKDEV_LOOKUP
- 	select IRQ_MIPS_CPU
--	select MIPS_MACHINE
- 	select SYS_HAS_CPU_MIPS32_R2
- 	select SYS_HAS_EARLY_PRINTK
- 	select SYS_SUPPORTS_32BIT_KERNEL
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,79 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
- 
--menu "Atheros AR71XX/AR724X/AR913X machine selection"
--
--config ATH79_MACH_AP121
--	bool "Atheros AP121 reference board"
--	select SOC_AR933X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP121 reference board.
--
--config ATH79_MACH_AP136
--	bool "Atheros AP136 reference board"
--	select SOC_QCA955X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP136 reference board.
--
--config ATH79_MACH_AP81
--	bool "Atheros AP81 reference board"
--	select SOC_AR913X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP81 reference board.
--
--config ATH79_MACH_DB120
--	bool "Atheros DB120 reference board"
--	select SOC_AR934X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros DB120 reference board.
--
--config ATH79_MACH_PB44
--	bool "Atheros PB44 reference board"
--	select SOC_AR71XX
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros PB44 reference board.
--
--config ATH79_MACH_UBNT_XM
--	bool "Ubiquiti Networks XM (rev 1.0) board"
--	select SOC_AR724X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Ubiquiti Networks XM (rev 1.0) board.
--
--endmenu
--
- config SOC_AR71XX
- 	select HW_HAS_PCI
- 	def_bool n
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev
- obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
--
--#
--# Machines
--#
--obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
--obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
--obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
--obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
--obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
--obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -26,7 +26,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "machtypes.h"
- 
- #define AR71XX_BASE_FREQ	40000000
- #define AR724X_BASE_FREQ	40000000
---- a/arch/mips/ath79/mach-ap121.c
-+++ /dev/null
-@@ -1,92 +0,0 @@
--/*
-- *  Atheros AP121 board support
-- *
-- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--
--#define AP121_GPIO_LED_WLAN		0
--#define AP121_GPIO_LED_USB		1
--
--#define AP121_GPIO_BTN_JUMPSTART	11
--#define AP121_GPIO_BTN_RESET		12
--
--#define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
--#define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
--
--#define AP121_CAL_DATA_ADDR	0x1fff1000
--
--static struct gpio_led ap121_leds_gpio[] __initdata = {
--	{
--		.name		= "ap121:green:usb",
--		.gpio		= AP121_GPIO_LED_USB,
--		.active_low	= 0,
--	},
--	{
--		.name		= "ap121:green:wlan",
--		.gpio		= AP121_GPIO_LED_WLAN,
--		.active_low	= 0,
--	},
--};
--
--static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
--	{
--		.desc		= "jumpstart button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP121_GPIO_BTN_JUMPSTART,
--		.active_low	= 1,
--	},
--	{
--		.desc		= "reset button",
--		.type		= EV_KEY,
--		.code		= KEY_RESTART,
--		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP121_GPIO_BTN_RESET,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info ap121_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l1606e",
--	}
--};
--
--static struct ath79_spi_platform_data ap121_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--static void __init ap121_setup(void)
--{
--	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
--				 ap121_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap121_gpio_keys),
--					ap121_gpio_keys);
--
--	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
--			   ARRAY_SIZE(ap121_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(cal_data);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
--	     ap121_setup);
---- a/arch/mips/ath79/mach-ap136.c
-+++ /dev/null
-@@ -1,156 +0,0 @@
--/*
-- * Qualcomm Atheros AP136 reference board support
-- *
-- * Copyright (c) 2012 Qualcomm Atheros
-- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define AP136_GPIO_LED_STATUS_RED	14
--#define AP136_GPIO_LED_STATUS_GREEN	19
--#define AP136_GPIO_LED_USB		4
--#define AP136_GPIO_LED_WLAN_2G		13
--#define AP136_GPIO_LED_WLAN_5G		12
--#define AP136_GPIO_LED_WPS_RED		15
--#define AP136_GPIO_LED_WPS_GREEN	20
--
--#define AP136_GPIO_BTN_WPS		16
--#define AP136_GPIO_BTN_RFKILL		21
--
--#define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
--#define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
--
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led ap136_leds_gpio[] __initdata = {
--	{
--		.name		= "qca:green:status",
--		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:status",
--		.gpio		= AP136_GPIO_LED_STATUS_RED,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:green:wps",
--		.gpio		= AP136_GPIO_LED_WPS_GREEN,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:wps",
--		.gpio		= AP136_GPIO_LED_WPS_RED,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:wlan-2g",
--		.gpio		= AP136_GPIO_LED_WLAN_2G,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:usb",
--		.gpio		= AP136_GPIO_LED_USB,
--		.active_low	= 1,
--	}
--};
--
--static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
--	{
--		.desc		= "WPS button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP136_GPIO_BTN_WPS,
--		.active_low	= 1,
--	},
--	{
--		.desc		= "RFKILL button",
--		.type		= EV_KEY,
--		.code		= KEY_RFKILL,
--		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP136_GPIO_BTN_RFKILL,
--		.active_low	= 1,
--	},
--};
--
--static struct spi_board_info ap136_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
--};
--
--static struct ath79_spi_platform_data ap136_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
--
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
--{
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
--
--	return 0;
--}
--
--static void __init ap136_pci_init(u8 *eeprom)
--{
--	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
--	       sizeof(ap136_ath9k_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init ap136_setup(void)
--{
--	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
--				 ap136_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap136_gpio_keys),
--					ap136_gpio_keys);
--	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
--			   ARRAY_SIZE(ap136_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
--	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
--	     "Atheros AP136-010 reference board",
--	     ap136_setup);
---- a/arch/mips/ath79/mach-ap81.c
-+++ /dev/null
-@@ -1,100 +0,0 @@
--/*
-- *  Atheros AP81 board support
-- *
-- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-wmac.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--
--#define AP81_GPIO_LED_STATUS	1
--#define AP81_GPIO_LED_AOSS	3
--#define AP81_GPIO_LED_WLAN	6
--#define AP81_GPIO_LED_POWER	14
--
--#define AP81_GPIO_BTN_SW4	12
--#define AP81_GPIO_BTN_SW1	21
--
--#define AP81_KEYS_POLL_INTERVAL		20	/* msecs */
--#define AP81_KEYS_DEBOUNCE_INTERVAL	(3 * AP81_KEYS_POLL_INTERVAL)
--
--#define AP81_CAL_DATA_ADDR	0x1fff1000
--
--static struct gpio_led ap81_leds_gpio[] __initdata = {
--	{
--		.name		= "ap81:green:status",
--		.gpio		= AP81_GPIO_LED_STATUS,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:amber:aoss",
--		.gpio		= AP81_GPIO_LED_AOSS,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:green:wlan",
--		.gpio		= AP81_GPIO_LED_WLAN,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:green:power",
--		.gpio		= AP81_GPIO_LED_POWER,
--		.active_low	= 1,
--	}
--};
--
--static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
--	{
--		.desc		= "sw1",
--		.type		= EV_KEY,
--		.code		= BTN_0,
--		.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP81_GPIO_BTN_SW1,
--		.active_low	= 1,
--	} , {
--		.desc		= "sw4",
--		.type		= EV_KEY,
--		.code		= BTN_1,
--		.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP81_GPIO_BTN_SW4,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info ap81_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "m25p64",
--	}
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--static void __init ap81_setup(void)
--{
--	u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
--				 ap81_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap81_gpio_keys),
--					ap81_gpio_keys);
--	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
--			   ARRAY_SIZE(ap81_spi_info));
--	ath79_register_wmac(cal_data);
--	ath79_register_usb();
--}
--
--MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
--	     ap81_setup);
---- a/arch/mips/ath79/mach-db120.c
-+++ /dev/null
-@@ -1,136 +0,0 @@
--/*
-- * Atheros DB120 reference board support
-- *
-- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define DB120_GPIO_LED_WLAN_5G		12
--#define DB120_GPIO_LED_WLAN_2G		13
--#define DB120_GPIO_LED_STATUS		14
--#define DB120_GPIO_LED_WPS		15
--
--#define DB120_GPIO_BTN_WPS		16
--
--#define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
--#define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
--
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led db120_leds_gpio[] __initdata = {
--	{
--		.name		= "db120:green:status",
--		.gpio		= DB120_GPIO_LED_STATUS,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wps",
--		.gpio		= DB120_GPIO_LED_WPS,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wlan-5g",
--		.gpio		= DB120_GPIO_LED_WLAN_5G,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wlan-2g",
--		.gpio		= DB120_GPIO_LED_WLAN_2G,
--		.active_low	= 1,
--	},
--};
--
--static struct gpio_keys_button db120_gpio_keys[] __initdata = {
--	{
--		.desc		= "WPS button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= DB120_GPIO_BTN_WPS,
--		.active_low	= 1,
--	},
--};
--
--static struct spi_board_info db120_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "s25sl064a",
--	}
--};
--
--static struct ath79_spi_platform_data db120_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &db120_ath9k_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
--	memcpy(db120_ath9k_data.eeprom_data, eeprom,
--	       sizeof(db120_ath9k_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init db120_setup(void)
--{
--	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
--				 db120_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(db120_gpio_keys),
--					db120_gpio_keys);
--	ath79_register_spi(&db120_spi_data, db120_spi_info,
--			   ARRAY_SIZE(db120_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
--	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
--	     db120_setup);
---- a/arch/mips/ath79/mach-pb44.c
-+++ /dev/null
-@@ -1,122 +0,0 @@
--/*
-- *  Atheros PB44 reference board support
-- *
-- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/i2c.h>
--#include <linux/i2c-gpio.h>
--#include <linux/platform_data/pcf857x.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "pci.h"
--
--#define PB44_GPIO_I2C_SCL	0
--#define PB44_GPIO_I2C_SDA	1
--
--#define PB44_GPIO_EXP_BASE	16
--#define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
--#define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
--#define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
--#define PB44_GPIO_LED_JUMP2	(PB44_GPIO_EXP_BASE + 10)
--
--#define PB44_KEYS_POLL_INTERVAL		20	/* msecs */
--#define PB44_KEYS_DEBOUNCE_INTERVAL	(3 * PB44_KEYS_POLL_INTERVAL)
--
--static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
--	.sda_pin	= PB44_GPIO_I2C_SDA,
--	.scl_pin	= PB44_GPIO_I2C_SCL,
--};
--
--static struct platform_device pb44_i2c_gpio_device = {
--	.name		= "i2c-gpio",
--	.id		= 0,
--	.dev = {
--		.platform_data	= &pb44_i2c_gpio_data,
--	}
--};
--
--static struct pcf857x_platform_data pb44_pcf857x_data = {
--	.gpio_base	= PB44_GPIO_EXP_BASE,
--};
--
--static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
--	{
--		I2C_BOARD_INFO("pcf8575", 0x20),
--		.platform_data	= &pb44_pcf857x_data,
--	},
--};
--
--static struct gpio_led pb44_leds_gpio[] __initdata = {
--	{
--		.name		= "pb44:amber:jump1",
--		.gpio		= PB44_GPIO_LED_JUMP1,
--		.active_low	= 1,
--	}, {
--		.name		= "pb44:green:jump2",
--		.gpio		= PB44_GPIO_LED_JUMP2,
--		.active_low	= 1,
--	},
--};
--
--static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
--	{
--		.desc		= "soft_reset",
--		.type		= EV_KEY,
--		.code		= KEY_RESTART,
--		.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= PB44_GPIO_SW_RESET,
--		.active_low	= 1,
--	} , {
--		.desc		= "jumpstart",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= PB44_GPIO_SW_JUMP,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info pb44_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "m25p64",
--	},
--};
--
--static struct ath79_spi_platform_data pb44_spi_data = {
--	.bus_num		= 0,
--	.num_chipselect		= 1,
--};
--
--static void __init pb44_init(void)
--{
--	i2c_register_board_info(0, pb44_i2c_board_info,
--				ARRAY_SIZE(pb44_i2c_board_info));
--	platform_device_register(&pb44_i2c_gpio_device);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
--				 pb44_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(pb44_gpio_keys),
--					pb44_gpio_keys);
--	ath79_register_spi(&pb44_spi_data, pb44_spi_info,
--			   ARRAY_SIZE(pb44_spi_info));
--	ath79_register_usb();
--	ath79_register_pci();
--}
--
--MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
--	     pb44_init);
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ /dev/null
-@@ -1,126 +0,0 @@
--/*
-- *  Ubiquiti Networks XM (rev 1.0) board support
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *
-- *  Derived from: mach-pb44.c
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/irq.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "pci.h"
--
--#define UBNT_XM_GPIO_LED_L1		0
--#define UBNT_XM_GPIO_LED_L2		1
--#define UBNT_XM_GPIO_LED_L3		11
--#define UBNT_XM_GPIO_LED_L4		7
--
--#define UBNT_XM_GPIO_BTN_RESET		12
--
--#define UBNT_XM_KEYS_POLL_INTERVAL	20
--#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
--
--#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
--
--static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
--	{
--		.name		= "ubnt-xm:red:link1",
--		.gpio		= UBNT_XM_GPIO_LED_L1,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:orange:link2",
--		.gpio		= UBNT_XM_GPIO_LED_L2,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:green:link3",
--		.gpio		= UBNT_XM_GPIO_LED_L3,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:green:link4",
--		.gpio		= UBNT_XM_GPIO_LED_L4,
--		.active_low	= 0,
--	},
--};
--
--static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
--	{
--		.desc			= "reset",
--		.type			= EV_KEY,
--		.code			= KEY_RESTART,
--		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
--		.gpio			= UBNT_XM_GPIO_BTN_RESET,
--		.active_low		= 1,
--	}
--};
--
--static struct spi_board_info ubnt_xm_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
--	.bus_num		= 0,
--	.num_chipselect		= 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &ubnt_xm_eeprom_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
--	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
--	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
--static void __init ubnt_xm_init(void)
--{
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
--				 ubnt_xm_leds_gpio);
--
--	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ubnt_xm_gpio_keys),
--					ubnt_xm_gpio_keys);
--
--	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
--			   ARRAY_SIZE(ubnt_xm_spi_info));
--
--	ubnt_xm_pci_init();
--}
--
--MIPS_MACHINE(ATH79_MACH_UBNT_XM,
--	     "UBNT-XM",
--	     "Ubiquiti Networks XM (rev 1.0) board",
--	     ubnt_xm_init);
---- a/arch/mips/ath79/machtypes.h
-+++ /dev/null
-@@ -1,28 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X machine type definitions
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_MACHTYPE_H
--#define _ATH79_MACHTYPE_H
--
--#include <asm/mips_machine.h>
--
--enum ath79_mach_type {
--	ATH79_MACH_GENERIC_OF = -1,	/* Device tree board */
--	ATH79_MACH_GENERIC = 0,
--	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
--	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
--	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
--	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
--	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
--	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
--};
--
--#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -33,7 +33,6 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
- #include "dev-common.h"
--#include "machtypes.h"
- 
- #define ATH79_SYS_TYPE_LEN	64
- 
-@@ -230,25 +229,21 @@ void __init plat_mem_setup(void)
- 	else if (fw_passed_dtb)
- 		__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
- 
--	if (mips_machtype != ATH79_MACH_GENERIC_OF) {
--		ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
--						   AR71XX_RESET_SIZE);
--		ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
--						 AR71XX_PLL_SIZE);
--		ath79_detect_sys_type();
--		ath79_ddr_ctrl_init();
-+	ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-+					   AR71XX_RESET_SIZE);
-+	ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-+					 AR71XX_PLL_SIZE);
-+	ath79_detect_sys_type();
-+	ath79_ddr_ctrl_init();
- 
--		detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
--
--		/* OF machines should use the reset driver */
--		_machine_restart = ath79_restart;
--	}
-+	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
- 
-+	_machine_restart = ath79_restart;
- 	_machine_halt = ath79_halt;
- 	pm_power_off = ath79_halt;
- }
- 
--static void __init ath79_of_plat_time_init(void)
-+void __init plat_time_init(void)
- {
- 	struct device_node *np;
- 	struct clk *clk;
-@@ -278,66 +273,12 @@ static void __init ath79_of_plat_time_in
- 	clk_put(clk);
- }
- 
--void __init plat_time_init(void)
--{
--	unsigned long cpu_clk_rate;
--	unsigned long ahb_clk_rate;
--	unsigned long ddr_clk_rate;
--	unsigned long ref_clk_rate;
--
--	if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
--		ath79_of_plat_time_init();
--		return;
--	}
--
--	ath79_clocks_init();
--
--	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
--	ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
--	ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
--	ref_clk_rate = ath79_get_sys_clk_rate("ref");
--
--	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
--		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
--		ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
--		ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
--		ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
--
--	mips_hpt_frequency = cpu_clk_rate / 2;
--}
--
- void __init arch_init_irq(void)
- {
- 	irqchip_init();
- }
- 
--static int __init ath79_setup(void)
--{
--	if  (mips_machtype == ATH79_MACH_GENERIC_OF)
--		return 0;
--
--	ath79_gpio_init();
--	ath79_register_uart();
--	ath79_register_wdt();
--
--	mips_machine_setup();
--
--	return 0;
--}
--
--arch_initcall(ath79_setup);
--
- void __init device_tree_init(void)
- {
- 	unflatten_and_copy_device_tree();
- }
--
--MIPS_MACHINE(ATH79_MACH_GENERIC,
--	     "Generic",
--	     "Generic AR71XX/AR724X/AR913X based board",
--	     NULL);
--
--MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
--	     "DTB",
--	     "Generic AR71XX/AR724X/AR913X based board (DT)",
--	     NULL);
diff --git a/target/linux/ath79/patches-4.14/0029-MIPS-ath79-drop-legacy-pci-code.patch b/target/linux/ath79/patches-4.14/0029-MIPS-ath79-drop-legacy-pci-code.patch
deleted file mode 100644
index 254f2f925342..000000000000
--- a/target/linux/ath79/patches-4.14/0029-MIPS-ath79-drop-legacy-pci-code.patch
+++ /dev/null
@@ -1,379 +0,0 @@
-From d0f1420702ed47a82572aaf39e7407055518d14e Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:19 +0200
-Subject: [PATCH 29/33] MIPS: ath79: drop legacy pci code
-
-With the target now being fully OF based, we can drop the legacy pci
-platform code. The only bits that we need to keep is the fixup code
-which we move to its own code file.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile    |   1 -
- arch/mips/ath79/pci.c       | 273 --------------------------------------------
- arch/mips/ath79/pci.h       |  35 ------
- arch/mips/pci/Makefile      |   1 +
- arch/mips/pci/fixup-ath79.c |  21 ++++
- 5 files changed, 22 insertions(+), 309 deletions(-)
- delete mode 100644 arch/mips/ath79/pci.c
- delete mode 100644 arch/mips/ath79/pci.h
- create mode 100644 arch/mips/pci/fixup-ath79.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,7 +11,6 @@
- obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
--obj-$(CONFIG_PCI)			+= pci.o
- 
- #
- # Devices
---- a/arch/mips/ath79/pci.c
-+++ /dev/null
-@@ -1,273 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X specific PCI setup code
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/resource.h>
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/irq.h>
--#include "pci.h"
--
--static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
--static const struct ath79_pci_irq *ath79_pci_irq_map;
--static unsigned ath79_pci_nr_irqs;
--
--static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
--	{
--		.slot	= 17,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	}, {
--		.slot	= 18,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(1),
--	}, {
--		.slot	= 19,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(2),
--	}
--};
--
--static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
--	{
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	}
--};
--
--static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
--	{
--		.bus	= 0,
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	},
--	{
--		.bus	= 1,
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(1),
--	},
--};
--
--int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
--{
--	int irq = -1;
--	int i;
--
--	if (ath79_pci_nr_irqs == 0 ||
--	    ath79_pci_irq_map == NULL) {
--		if (soc_is_ar71xx()) {
--			ath79_pci_irq_map = ar71xx_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
--		} else if (soc_is_ar724x() ||
--			   soc_is_ar9342() ||
--			   soc_is_ar9344()) {
--			ath79_pci_irq_map = ar724x_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
--		} else if (soc_is_qca955x()) {
--			ath79_pci_irq_map = qca955x_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
--		} else {
--			pr_crit("pci %s: invalid irq map\n",
--				pci_name((struct pci_dev *) dev));
--			return irq;
--		}
--	}
--
--	for (i = 0; i < ath79_pci_nr_irqs; i++) {
--		const struct ath79_pci_irq *entry;
--
--		entry = &ath79_pci_irq_map[i];
--		if (entry->bus == dev->bus->number &&
--		    entry->slot == slot &&
--		    entry->pin == pin) {
--			irq = entry->irq;
--			break;
--		}
--	}
--
--	if (irq < 0)
--		pr_crit("pci %s: no irq found for pin %u\n",
--			pci_name((struct pci_dev *) dev), pin);
--	else
--		pr_info("pci %s: using irq %d for pin %u\n",
--			pci_name((struct pci_dev *) dev), irq, pin);
--
--	return irq;
--}
--
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
--	if (ath79_pci_plat_dev_init)
--		return ath79_pci_plat_dev_init(dev);
--
--	return 0;
--}
--
--void __init ath79_pci_set_irq_map(unsigned nr_irqs,
--				  const struct ath79_pci_irq *map)
--{
--	ath79_pci_nr_irqs = nr_irqs;
--	ath79_pci_irq_map = map;
--}
--
--void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
--{
--	ath79_pci_plat_dev_init = func;
--}
--
--static struct platform_device *
--ath79_register_pci_ar71xx(void)
--{
--	struct platform_device *pdev;
--	struct resource res[4];
--
--	memset(res, 0, sizeof(res));
--
--	res[0].name = "cfg_base";
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = AR71XX_PCI_CFG_BASE;
--	res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
--
--	res[1].flags = IORESOURCE_IRQ;
--	res[1].start = ATH79_CPU_IRQ(2);
--	res[1].end = ATH79_CPU_IRQ(2);
--
--	res[2].name = "io_base";
--	res[2].flags = IORESOURCE_IO;
--	res[2].start = 0;
--	res[2].end = 0;
--
--	res[3].name = "mem_base";
--	res[3].flags = IORESOURCE_MEM;
--	res[3].start = AR71XX_PCI_MEM_BASE;
--	res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
--
--	pdev = platform_device_register_simple("ar71xx-pci", -1,
--					       res, ARRAY_SIZE(res));
--	return pdev;
--}
--
--static struct platform_device *
--ath79_register_pci_ar724x(int id,
--			  unsigned long cfg_base,
--			  unsigned long ctrl_base,
--			  unsigned long crp_base,
--			  unsigned long mem_base,
--			  unsigned long mem_size,
--			  unsigned long io_base,
--			  int irq)
--{
--	struct platform_device *pdev;
--	struct resource res[6];
--
--	memset(res, 0, sizeof(res));
--
--	res[0].name = "cfg_base";
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = cfg_base;
--	res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
--
--	res[1].name = "ctrl_base";
--	res[1].flags = IORESOURCE_MEM;
--	res[1].start = ctrl_base;
--	res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
--
--	res[2].flags = IORESOURCE_IRQ;
--	res[2].start = irq;
--	res[2].end = irq;
--
--	res[3].name = "mem_base";
--	res[3].flags = IORESOURCE_MEM;
--	res[3].start = mem_base;
--	res[3].end = mem_base + mem_size - 1;
--
--	res[4].name = "io_base";
--	res[4].flags = IORESOURCE_IO;
--	res[4].start = io_base;
--	res[4].end = io_base;
--
--	res[5].name = "crp_base";
--	res[5].flags = IORESOURCE_MEM;
--	res[5].start = crp_base;
--	res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
--
--	pdev = platform_device_register_simple("ar724x-pci", id,
--					       res, ARRAY_SIZE(res));
--	return pdev;
--}
--
--int __init ath79_register_pci(void)
--{
--	struct platform_device *pdev = NULL;
--
--	if (soc_is_ar71xx()) {
--		pdev = ath79_register_pci_ar71xx();
--	} else if (soc_is_ar724x()) {
--		pdev = ath79_register_pci_ar724x(-1,
--						 AR724X_PCI_CFG_BASE,
--						 AR724X_PCI_CTRL_BASE,
--						 AR724X_PCI_CRP_BASE,
--						 AR724X_PCI_MEM_BASE,
--						 AR724X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_CPU_IRQ(2));
--	} else if (soc_is_ar9342() ||
--		   soc_is_ar9344()) {
--		u32 bootstrap;
--
--		bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--		if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
--			return -ENODEV;
--
--		pdev = ath79_register_pci_ar724x(-1,
--						 AR724X_PCI_CFG_BASE,
--						 AR724X_PCI_CTRL_BASE,
--						 AR724X_PCI_CRP_BASE,
--						 AR724X_PCI_MEM_BASE,
--						 AR724X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_IP2_IRQ(0));
--	} else if (soc_is_qca9558()) {
--		pdev = ath79_register_pci_ar724x(0,
--						 QCA955X_PCI_CFG_BASE0,
--						 QCA955X_PCI_CTRL_BASE0,
--						 QCA955X_PCI_CRP_BASE0,
--						 QCA955X_PCI_MEM_BASE0,
--						 QCA955X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_IP2_IRQ(0));
--
--		pdev = ath79_register_pci_ar724x(1,
--						 QCA955X_PCI_CFG_BASE1,
--						 QCA955X_PCI_CTRL_BASE1,
--						 QCA955X_PCI_CRP_BASE1,
--						 QCA955X_PCI_MEM_BASE1,
--						 QCA955X_PCI_MEM_SIZE,
--						 1,
--						 ATH79_IP3_IRQ(2));
--	} else {
--		/* No PCI support */
--		return -ENODEV;
--	}
--
--	if (!pdev)
--		pr_err("unable to register PCI controller device\n");
--
--	return pdev ? 0 : -ENODEV;
--}
---- a/arch/mips/ath79/pci.h
-+++ /dev/null
-@@ -1,35 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X PCI support
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_PCI_H
--#define _ATH79_PCI_H
--
--struct ath79_pci_irq {
--	int	bus;
--	u8	slot;
--	u8	pin;
--	int	irq;
--};
--
--#ifdef CONFIG_PCI
--void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
--void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
--int ath79_register_pci(void);
--#else
--static inline void
--ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
--static inline void
--ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
--static inline int ath79_register_pci(void) { return 0; }
--#endif
--
--#endif /* _ATH79_PCI_H */
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-vir
- #
- # These are still pretty much in the old state, watch, go blind.
- #
-+obj-$(CONFIG_ATH79)		+= fixup-ath79.o
- obj-$(CONFIG_LASAT)		+= pci-lasat.o
- obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
- obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-ath79.c
-@@ -0,0 +1,21 @@
-+/*
-+ *  Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+//#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	return of_irq_parse_and_map_pci(dev, slot, pin);
-+}
diff --git a/target/linux/ath79/patches-4.14/0030-MIPS-ath79-drop-platform-device-registration-code.patch b/target/linux/ath79/patches-4.14/0030-MIPS-ath79-drop-platform-device-registration-code.patch
deleted file mode 100644
index 93a133c1dfba..000000000000
--- a/target/linux/ath79/patches-4.14/0030-MIPS-ath79-drop-platform-device-registration-code.patch
+++ /dev/null
@@ -1,933 +0,0 @@
-From dce930fba8ad3a90ccd164f199e57c2d61937ccd Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:12:38 +0200
-Subject: [PATCH 30/33] MIPS: ath79: drop platform device registration code
-
-With the target now being fully OF based, we can drop the legacy platform
-device registration code. All devices and their drivers are now probed
-via OF.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile           |  10 --
- arch/mips/ath79/common.h           |   2 -
- arch/mips/ath79/dev-common.c       | 159 ------------------------
- arch/mips/ath79/dev-common.h       |  18 ---
- arch/mips/ath79/dev-gpio-buttons.c |  56 ---------
- arch/mips/ath79/dev-gpio-buttons.h |  23 ----
- arch/mips/ath79/dev-leds-gpio.c    |  54 ---------
- arch/mips/ath79/dev-leds-gpio.h    |  21 ----
- arch/mips/ath79/dev-spi.c          |  38 ------
- arch/mips/ath79/dev-spi.h          |  22 ----
- arch/mips/ath79/dev-usb.c          | 242 -------------------------------------
- arch/mips/ath79/dev-usb.h          |  17 ---
- arch/mips/ath79/dev-wmac.c         | 155 ------------------------
- arch/mips/ath79/dev-wmac.h         |  17 ---
- arch/mips/ath79/setup.c            |   1 -
- 15 files changed, 835 deletions(-)
- delete mode 100644 arch/mips/ath79/dev-common.c
- delete mode 100644 arch/mips/ath79/dev-common.h
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
- delete mode 100644 arch/mips/ath79/dev-spi.c
- delete mode 100644 arch/mips/ath79/dev-spi.h
- delete mode 100644 arch/mips/ath79/dev-usb.c
- delete mode 100644 arch/mips/ath79/dev-usb.h
- delete mode 100644 arch/mips/ath79/dev-wmac.c
- delete mode 100644 arch/mips/ath79/dev-wmac.h
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,13 +11,3 @@
- obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
--
--#
--# Devices
--#
--obj-y					+= dev-common.o
--obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
--obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
--obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
--obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
--obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -24,6 +24,4 @@ unsigned long ath79_get_sys_clk_rate(con
- 
- void ath79_ddr_ctrl_init(void);
- 
--void ath79_gpio_init(void);
--
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/dev-common.c
-+++ /dev/null
-@@ -1,159 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common devices
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/platform_data/gpio-ath79.h>
--#include <linux/serial_8250.h>
--#include <linux/clk.h>
--#include <linux/err.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-common.h"
--
--static struct resource ath79_uart_resources[] = {
--	{
--		.start	= AR71XX_UART_BASE,
--		.end	= AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--};
--
--#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
--static struct plat_serial8250_port ath79_uart_data[] = {
--	{
--		.mapbase	= AR71XX_UART_BASE,
--		.irq		= ATH79_MISC_IRQ(3),
--		.flags		= AR71XX_UART_FLAGS,
--		.iotype		= UPIO_MEM32,
--		.regshift	= 2,
--	}, {
--		/* terminating entry */
--	}
--};
--
--static struct platform_device ath79_uart_device = {
--	.name		= "serial8250",
--	.id		= PLAT8250_DEV_PLATFORM,
--	.resource	= ath79_uart_resources,
--	.num_resources	= ARRAY_SIZE(ath79_uart_resources),
--	.dev = {
--		.platform_data	= ath79_uart_data
--	},
--};
--
--static struct resource ar933x_uart_resources[] = {
--	{
--		.start	= AR933X_UART_BASE,
--		.end	= AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--	{
--		.start	= ATH79_MISC_IRQ(3),
--		.end	= ATH79_MISC_IRQ(3),
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ar933x_uart_device = {
--	.name		= "ar933x-uart",
--	.id		= -1,
--	.resource	= ar933x_uart_resources,
--	.num_resources	= ARRAY_SIZE(ar933x_uart_resources),
--};
--
--void __init ath79_register_uart(void)
--{
--	unsigned long uart_clk_rate;
--
--	uart_clk_rate = ath79_get_sys_clk_rate("uart");
--
--	if (soc_is_ar71xx() ||
--	    soc_is_ar724x() ||
--	    soc_is_ar913x() ||
--	    soc_is_ar934x() ||
--	    soc_is_qca955x()) {
--		ath79_uart_data[0].uartclk = uart_clk_rate;
--		platform_device_register(&ath79_uart_device);
--	} else if (soc_is_ar933x()) {
--		platform_device_register(&ar933x_uart_device);
--	} else {
--		BUG();
--	}
--}
--
--void __init ath79_register_wdt(void)
--{
--	struct resource res;
--
--	memset(&res, 0, sizeof(res));
--
--	res.flags = IORESOURCE_MEM;
--	res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
--	res.end = res.start + 0x8 - 1;
--
--	platform_device_register_simple("ath79-wdt", -1, &res, 1);
--}
--
--static struct ath79_gpio_platform_data ath79_gpio_pdata;
--
--static struct resource ath79_gpio_resources[] = {
--	{
--		.flags = IORESOURCE_MEM,
--		.start = AR71XX_GPIO_BASE,
--		.end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
--	},
--	{
--		.start	= ATH79_MISC_IRQ(2),
--		.end	= ATH79_MISC_IRQ(2),
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ath79_gpio_device = {
--	.name		= "ath79-gpio",
--	.id		= -1,
--	.resource	= ath79_gpio_resources,
--	.num_resources	= ARRAY_SIZE(ath79_gpio_resources),
--	.dev = {
--		.platform_data	= &ath79_gpio_pdata
--	},
--};
--
--void __init ath79_gpio_init(void)
--{
--	if (soc_is_ar71xx()) {
--		ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
--	} else if (soc_is_ar7240()) {
--		ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
--	} else if (soc_is_ar7241() || soc_is_ar7242()) {
--		ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
--	} else if (soc_is_ar913x()) {
--		ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
--	} else if (soc_is_ar933x()) {
--		ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
--	} else if (soc_is_ar934x()) {
--		ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
--		ath79_gpio_pdata.oe_inverted = 1;
--	} else if (soc_is_qca955x()) {
--		ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
--		ath79_gpio_pdata.oe_inverted = 1;
--	} else {
--		BUG();
--	}
--
--	platform_device_register(&ath79_gpio_device);
--}
---- a/arch/mips/ath79/dev-common.h
-+++ /dev/null
-@@ -1,18 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common devices
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_COMMON_H
--#define _ATH79_DEV_COMMON_H
--
--void ath79_register_uart(void);
--void ath79_register_wdt(void);
--
--#endif /* _ATH79_DEV_COMMON_H */
---- a/arch/mips/ath79/dev-gpio-buttons.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "linux/init.h"
--#include "linux/slab.h"
--#include <linux/platform_device.h>
--
--#include "dev-gpio-buttons.h"
--
--void __init ath79_register_gpio_keys_polled(int id,
--					    unsigned poll_interval,
--					    unsigned nbuttons,
--					    struct gpio_keys_button *buttons)
--{
--	struct platform_device *pdev;
--	struct gpio_keys_platform_data pdata;
--	struct gpio_keys_button *p;
--	int err;
--
--	p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
--	if (!p)
--		return;
--
--	pdev = platform_device_alloc("gpio-keys-polled", id);
--	if (!pdev)
--		goto err_free_buttons;
--
--	memset(&pdata, 0, sizeof(pdata));
--	pdata.poll_interval = poll_interval;
--	pdata.nbuttons = nbuttons;
--	pdata.buttons = p;
--
--	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
--	if (err)
--		goto err_put_pdev;
--
--	err = platform_device_add(pdev);
--	if (err)
--		goto err_put_pdev;
--
--	return;
--
--err_put_pdev:
--	platform_device_put(pdev);
--
--err_free_buttons:
--	kfree(p);
--}
---- a/arch/mips/ath79/dev-gpio-buttons.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_GPIO_BUTTONS_H
--#define _ATH79_DEV_GPIO_BUTTONS_H
--
--#include <linux/input.h>
--#include <linux/gpio_keys.h>
--
--void ath79_register_gpio_keys_polled(int id,
--				     unsigned poll_interval,
--				     unsigned nbuttons,
--				     struct gpio_keys_button *buttons);
--
--#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
---- a/arch/mips/ath79/dev-leds-gpio.c
-+++ /dev/null
-@@ -1,54 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/slab.h>
--#include <linux/platform_device.h>
--
--#include "dev-leds-gpio.h"
--
--void __init ath79_register_leds_gpio(int id,
--				     unsigned num_leds,
--				     struct gpio_led *leds)
--{
--	struct platform_device *pdev;
--	struct gpio_led_platform_data pdata;
--	struct gpio_led *p;
--	int err;
--
--	p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
--	if (!p)
--		return;
--
--	pdev = platform_device_alloc("leds-gpio", id);
--	if (!pdev)
--		goto err_free_leds;
--
--	memset(&pdata, 0, sizeof(pdata));
--	pdata.num_leds = num_leds;
--	pdata.leds = p;
--
--	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
--	if (err)
--		goto err_put_pdev;
--
--	err = platform_device_add(pdev);
--	if (err)
--		goto err_put_pdev;
--
--	return;
--
--err_put_pdev:
--	platform_device_put(pdev);
--
--err_free_leds:
--	kfree(p);
--}
---- a/arch/mips/ath79/dev-leds-gpio.h
-+++ /dev/null
-@@ -1,21 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_LEDS_GPIO_H
--#define _ATH79_DEV_LEDS_GPIO_H
--
--#include <linux/leds.h>
--
--void ath79_register_leds_gpio(int id,
--			      unsigned num_leds,
--			      struct gpio_led *leds);
--
--#endif /* _ATH79_DEV_LEDS_GPIO_H */
---- a/arch/mips/ath79/dev-spi.c
-+++ /dev/null
-@@ -1,38 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-spi.h"
--
--static struct resource ath79_spi_resources[] = {
--	{
--		.start	= AR71XX_SPI_BASE,
--		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--};
--
--static struct platform_device ath79_spi_device = {
--	.name		= "ath79-spi",
--	.id		= -1,
--	.resource	= ath79_spi_resources,
--	.num_resources	= ARRAY_SIZE(ath79_spi_resources),
--};
--
--void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
--			       struct spi_board_info const *info,
--			       unsigned n)
--{
--	spi_register_board_info(info, n);
--	ath79_spi_device.dev.platform_data = pdata;
--	platform_device_register(&ath79_spi_device);
--}
---- a/arch/mips/ath79/dev-spi.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_SPI_H
--#define _ATH79_DEV_SPI_H
--
--#include <linux/spi/spi.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
--
--void ath79_register_spi(struct ath79_spi_platform_data *pdata,
--			 struct spi_board_info const *info,
--			 unsigned n);
--
--#endif /* _ATH79_DEV_SPI_H */
---- a/arch/mips/ath79/dev-usb.c
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- *  Atheros AR7XXX/AR9XXX USB Host Controller device
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/dma-mapping.h>
--#include <linux/platform_device.h>
--#include <linux/usb/ehci_pdriver.h>
--#include <linux/usb/ohci_pdriver.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-usb.h"
--
--static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
--
--static struct usb_ohci_pdata ath79_ohci_pdata = {
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
--	.has_synopsys_hc_bug	= 1,
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
--	.caps_offset		= 0x100,
--	.has_tt			= 1,
--};
--
--static void __init ath79_usb_register(const char *name, int id,
--				      unsigned long base, unsigned long size,
--				      int irq, const void *data,
--				      size_t data_size)
--{
--	struct resource res[2];
--	struct platform_device *pdev;
--
--	memset(res, 0, sizeof(res));
--
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = base;
--	res[0].end = base + size - 1;
--
--	res[1].flags = IORESOURCE_IRQ;
--	res[1].start = irq;
--	res[1].end = irq;
--
--	pdev = platform_device_register_resndata(NULL, name, id,
--						 res, ARRAY_SIZE(res),
--						 data, data_size);
--
--	if (IS_ERR(pdev)) {
--		pr_err("ath79: unable to register USB at %08lx, err=%d\n",
--		       base, (int) PTR_ERR(pdev));
--		return;
--	}
--
--	pdev->dev.dma_mask = &ath79_usb_dmamask;
--	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
--}
--
--#define AR71XX_USB_RESET_MASK	(AR71XX_RESET_USB_HOST | \
--				 AR71XX_RESET_USB_PHY | \
--				 AR71XX_RESET_USB_OHCI_DLL)
--
--static void __init ath79_usb_setup(void)
--{
--	void __iomem *usb_ctrl_base;
--
--	ath79_device_reset_set(AR71XX_USB_RESET_MASK);
--	mdelay(1000);
--	ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
--
--	usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
--
--	/* Turning on the Buff and Desc swap bits */
--	__raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
--
--	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
--	__raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
--	iounmap(usb_ctrl_base);
--
--	mdelay(900);
--
--	ath79_usb_register("ohci-platform", -1,
--			   AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
--			   ATH79_MISC_IRQ(6),
--			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
--}
--
--static void __init ar7240_usb_setup(void)
--{
--	void __iomem *usb_ctrl_base;
--
--	ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
--	ath79_device_reset_set(AR7240_RESET_USB_HOST);
--
--	mdelay(1000);
--
--	ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
--	ath79_device_reset_clear(AR7240_RESET_USB_HOST);
--
--	usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
--
--	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
--	__raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
--	iounmap(usb_ctrl_base);
--
--	ath79_usb_register("ohci-platform", -1,
--			   AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--}
--
--static void __init ar724x_usb_setup(void)
--{
--	ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR724X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR724X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar913x_usb_setup(void)
--{
--	ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar933x_usb_setup(void)
--{
--	ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR933X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR933X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar934x_usb_setup(void)
--{
--	u32 bootstrap;
--
--	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--	if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
--		return;
--
--	ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_PHY);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_HOST);
--	udelay(1000);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init qca955x_usb_setup(void)
--{
--	ath79_usb_register("ehci-platform", 0,
--			   QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
--			   ATH79_IP3_IRQ(0),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--
--	ath79_usb_register("ehci-platform", 1,
--			   QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
--			   ATH79_IP3_IRQ(1),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--void __init ath79_register_usb(void)
--{
--	if (soc_is_ar71xx())
--		ath79_usb_setup();
--	else if (soc_is_ar7240())
--		ar7240_usb_setup();
--	else if (soc_is_ar7241() || soc_is_ar7242())
--		ar724x_usb_setup();
--	else if (soc_is_ar913x())
--		ar913x_usb_setup();
--	else if (soc_is_ar933x())
--		ar933x_usb_setup();
--	else if (soc_is_ar934x())
--		ar934x_usb_setup();
--	else if (soc_is_qca955x())
--		qca955x_usb_setup();
--	else
--		BUG();
--}
---- a/arch/mips/ath79/dev-usb.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X USB Host Controller support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_USB_H
--#define _ATH79_DEV_USB_H
--
--void ath79_register_usb(void);
--
--#endif /* _ATH79_DEV_USB_H */
---- a/arch/mips/ath79/dev-wmac.c
-+++ /dev/null
-@@ -1,155 +0,0 @@
--/*
-- *  Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/platform_device.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-wmac.h"
--
--static struct ath9k_platform_data ath79_wmac_data;
--
--static struct resource ath79_wmac_resources[] = {
--	{
--		/* .start and .end fields are filled dynamically */
--		.flags	= IORESOURCE_MEM,
--	}, {
--		/* .start and .end fields are filled dynamically */
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ath79_wmac_device = {
--	.name		= "ath9k",
--	.id		= -1,
--	.resource	= ath79_wmac_resources,
--	.num_resources	= ARRAY_SIZE(ath79_wmac_resources),
--	.dev = {
--		.platform_data = &ath79_wmac_data,
--	},
--};
--
--static void __init ar913x_wmac_setup(void)
--{
--	/* reset the WMAC */
--	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
--	mdelay(10);
--
--	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
--	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--}
--
--
--static int ar933x_wmac_reset(void)
--{
--	ath79_device_reset_set(AR933X_RESET_WMAC);
--	ath79_device_reset_clear(AR933X_RESET_WMAC);
--
--	return 0;
--}
--
--static int ar933x_r1_get_wmac_revision(void)
--{
--	return ath79_soc_rev;
--}
--
--static void __init ar933x_wmac_setup(void)
--{
--	u32 t;
--
--	ar933x_wmac_reset();
--
--	ath79_wmac_device.name = "ar933x_wmac";
--
--	ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
--	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--
--	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
--	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--
--	if (ath79_soc_rev == 1)
--		ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
--
--	ath79_wmac_data.external_reset = ar933x_wmac_reset;
--}
--
--static void ar934x_wmac_setup(void)
--{
--	u32 t;
--
--	ath79_wmac_device.name = "ar934x_wmac";
--
--	ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
--	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
--	t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--	if (t & AR934X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--}
--
--static void qca955x_wmac_setup(void)
--{
--	u32 t;
--
--	ath79_wmac_device.name = "qca955x_wmac";
--
--	ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
--	ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
--	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
--	t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
--	if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--}
--
--void __init ath79_register_wmac(u8 *cal_data)
--{
--	if (soc_is_ar913x())
--		ar913x_wmac_setup();
--	else if (soc_is_ar933x())
--		ar933x_wmac_setup();
--	else if (soc_is_ar934x())
--		ar934x_wmac_setup();
--	else if (soc_is_qca955x())
--		qca955x_wmac_setup();
--	else
--		BUG();
--
--	if (cal_data)
--		memcpy(ath79_wmac_data.eeprom_data, cal_data,
--		       sizeof(ath79_wmac_data.eeprom_data));
--
--	platform_device_register(&ath79_wmac_device);
--}
---- a/arch/mips/ath79/dev-wmac.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- *  Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_WMAC_H
--#define _ATH79_DEV_WMAC_H
--
--void ath79_register_wmac(u8 *cal_data);
--
--#endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -32,7 +32,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "dev-common.h"
- 
- #define ATH79_SYS_TYPE_LEN	64
- 
diff --git a/target/linux/ath79/patches-4.14/0031-MIPS-ath79-drop-OF-clock-code.patch b/target/linux/ath79/patches-4.14/0031-MIPS-ath79-drop-OF-clock-code.patch
deleted file mode 100644
index a11be73d7a80..000000000000
--- a/target/linux/ath79/patches-4.14/0031-MIPS-ath79-drop-OF-clock-code.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 00e4313da4609074fff134e61dd9ffe3fd37474d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sun, 24 Jun 2018 09:39:41 +0200
-Subject: [PATCH 31/33] MIPS: ath79: drop !OF clock code
-
-With the target now being fully OF based, we can drop the legacy clock
-registration code. All clocks are now probed via devicetree.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c  | 56 ------------------------------------------------
- arch/mips/ath79/common.h |  3 ---
- 2 files changed, 59 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -617,60 +617,6 @@ static void __init qca956x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--void __init ath79_clocks_init(void)
--{
--	const char *wdt;
--	const char *uart;
--
--	if (soc_is_ar71xx())
--		ar71xx_clocks_init(ath79_pll_base);
--	else if (soc_is_ar724x() || soc_is_ar913x())
--		ar724x_clocks_init(ath79_pll_base);
--	else if (soc_is_ar933x())
--		ar933x_clocks_init(ath79_pll_base);
--	else if (soc_is_ar934x())
--		ar934x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca953x())
--		qca953x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca955x())
--		qca955x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca956x() || soc_is_tp9343())
--		qca956x_clocks_init(ath79_pll_base);
--	else
--		BUG();
--
--	if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
--		wdt = "ahb";
--		uart = "ahb";
--	} else if (soc_is_ar933x()) {
--		wdt = "ahb";
--		uart = "ref";
--	} else {
--		wdt = "ref";
--		uart = "ref";
--	}
--
--	clk_add_alias("wdt", NULL, wdt, NULL);
--	clk_add_alias("uart", NULL, uart, NULL);
--}
--
--unsigned long __init
--ath79_get_sys_clk_rate(const char *id)
--{
--	struct clk *clk;
--	unsigned long rate;
--
--	clk = clk_get(NULL, id);
--	if (IS_ERR(clk))
--		panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
--
--	rate = clk_get_rate(clk);
--	clk_put(clk);
--
--	return rate;
--}
--
--#ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
- 	struct clk *ref_clk;
-@@ -727,5 +673,3 @@ CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-p
- CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
--
--#endif
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -19,9 +19,6 @@
- #define ATH79_MEM_SIZE_MIN	(2 * 1024 * 1024)
- #define ATH79_MEM_SIZE_MAX	(256 * 1024 * 1024)
- 
--void ath79_clocks_init(void);
--unsigned long ath79_get_sys_clk_rate(const char *id);
--
- void ath79_ddr_ctrl_init(void);
- 
- #endif /* __ATH79_COMMON_H */
diff --git a/target/linux/ath79/patches-4.14/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-4.14/0032-MIPS-ath79-sanitize-symbols.patch
deleted file mode 100644
index eaefc0bd214f..000000000000
--- a/target/linux/ath79/patches-4.14/0032-MIPS-ath79-sanitize-symbols.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:16:55 +0200
-Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
-
-We no longer need to select which SoCs are supported as the whole arch
-code is always built. So lets drop all the SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig       |  2 ++
- arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
- arch/mips/pci/Makefile  |  2 +-
- 3 files changed, 8 insertions(+), 40 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -203,6 +203,8 @@ config ATH79
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_SUPPORTS_MIPS16
- 	select SYS_SUPPORTS_ZBOOT_UART_PROM
-+	select HW_HAS_PCI
-+	select USB_ARCH_HAS_EHCI
- 	select USE_OF
- 	help
- 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,48 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
- 
--config SOC_AR71XX
--	select HW_HAS_PCI
--	def_bool n
--
--config SOC_AR724X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_AR913X
--	def_bool n
--
--config SOC_AR933X
--	def_bool n
--
--config SOC_AR934X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_QCA955X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
-+config PCI_AR71XX
-+	bool "PCI support for AR7100 type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- config PCI_AR724X
--	def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
--	def_bool n
--
--config ATH79_DEV_LEDS_GPIO
--	def_bool n
--
--config ATH79_DEV_SPI
--	def_bool n
--
--config ATH79_DEV_USB
--	def_bool n
--
--config ATH79_DEV_WMAC
--	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+	bool "PCI support for AR724x type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o
- 					ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
- obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
- #
diff --git a/target/linux/ath79/patches-4.14/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-4.14/0033-spi-ath79-drop-pdata-support.patch
deleted file mode 100644
index aeb50c9b1caa..000000000000
--- a/target/linux/ath79/patches-4.14/0033-spi-ath79-drop-pdata-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:34 +0200
-Subject: [PATCH 33/33] spi: ath79: drop pdata support
-
-The target is being converted to pure OF. We can therefore drop all of the
-platform data code from the driver.
-
-Cc: linux-spi@vger.kernel.org
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/ath79_spi_platform.h | 19 -------------------
- drivers/spi/spi-ath79.c                               |  8 --------
- 2 files changed, 27 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ /dev/null
-@@ -1,19 +0,0 @@
--/*
-- *  Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_SPI_PLATFORM_H
--#define _ATH79_SPI_PLATFORM_H
--
--struct ath79_spi_platform_data {
--	unsigned	bus_num;
--	unsigned	num_chipselect;
--};
--
--#endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -26,7 +26,6 @@
- #include <linux/err.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
- 
- #define DRV_NAME	"ath79-spi"
- 
-@@ -208,7 +207,6 @@ static int ath79_spi_probe(struct platfo
- {
- 	struct spi_master *master;
- 	struct ath79_spi *sp;
--	struct ath79_spi_platform_data *pdata;
- 	struct resource	*r;
- 	unsigned long rate;
- 	int ret;
-@@ -223,15 +221,9 @@ static int ath79_spi_probe(struct platfo
- 	master->dev.of_node = pdev->dev.of_node;
- 	platform_set_drvdata(pdev, sp);
- 
--	pdata = dev_get_platdata(&pdev->dev);
--
- 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- 	master->setup = ath79_spi_setup;
- 	master->cleanup = ath79_spi_cleanup;
--	if (pdata) {
--		master->bus_num = pdata->bus_num;
--		master->num_chipselect = pdata->num_chipselect;
--	}
- 
- 	sp->bitbang.master = master;
- 	sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-4.14/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-4.14/0034-MIPS-ath79-ath9k-exports.patch
deleted file mode 100644
index 6eec142c7467..000000000000
--- a/target/linux/ath79/patches-4.14/0034-MIPS-ath79-ath9k-exports.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -34,11 +34,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
- 
- enum ath79_soc_type ath79_soc;
- unsigned int ath79_soc_rev;
-+EXPORT_SYMBOL_GPL(ath79_soc_rev);
- 
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
-+EXPORT_SYMBOL_GPL(ath79_ddr_base);
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
- 
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -152,6 +152,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_ddr_set_pci_windows(void);
- 
- extern void __iomem *ath79_pll_base;
-+extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_reset_base;
- 
- static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-4.14/0036-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-4.14/0036-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 61ed9ea784e7..000000000000
--- a/target/linux/ath79/patches-4.14/0036-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c     |   68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c  |   10 +++++-
- include/asm-generic/gpio.h    |    6 ++++
- include/linux/gpio/consumer.h |    8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- 
-@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip
- 	gpiochip_remove_pin_ranges(chip);
- 	of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -553,7 +553,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpio_device	*gdev;
-@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -636,6 +638,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
diff --git a/target/linux/ath79/patches-4.14/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-4.14/0036-MIPS-ath79-remove-irq-code-from-pci.patch
deleted file mode 100644
index 460c4580eede..000000000000
--- a/target/linux/ath79/patches-4.14/0036-MIPS-ath79-remove-irq-code-from-pci.patch
+++ /dev/null
@@ -1,139 +0,0 @@
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -54,11 +54,9 @@
- struct ar71xx_pci_controller {
- 	struct device_node *np;
- 	void __iomem *cfg_base;
--	int irq;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
--	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -230,104 +228,6 @@ static struct pci_ops ar71xx_pci_ops = {
- 	.write	= ar71xx_pci_write_config,
- };
- 
--static void ar71xx_pci_irq_handler(struct irq_desc *desc)
--{
--	void __iomem *base = ath79_reset_base;
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
--	u32 pending;
--
--	chained_irq_enter(chip, desc);
--	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
--		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
--
--	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
--
--	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
--
--	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
--
--	else
--		spurious_interrupt();
--	chained_irq_exit(chip, desc);
--}
--
--static void ar71xx_pci_irq_unmask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static void ar71xx_pci_irq_mask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static struct irq_chip ar71xx_pci_irq_chip = {
--	.name		= "AR71XX PCI",
--	.irq_mask	= ar71xx_pci_irq_mask,
--	.irq_unmask	= ar71xx_pci_irq_unmask,
--	.irq_mask_ack	= ar71xx_pci_irq_mask,
--};
--
--static int ar71xx_pci_irq_map(struct irq_domain *d,
--			      unsigned int irq, irq_hw_number_t hw)
--{
--	struct ar71xx_pci_controller *apc = d->host_data;
--
--	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
--	irq_set_chip_data(irq, apc);
--
--	return 0;
--}
--
--static const struct irq_domain_ops ar71xx_pci_domain_ops = {
--	.xlate = irq_domain_xlate_onecell,
--	.map = ar71xx_pci_irq_map,
--};
--
--static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
--{
--	void __iomem *base = ath79_reset_base;
--
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
--
--	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
--					    &ar71xx_pci_domain_ops, apc);
--	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
--					 apc);
--}
--
- static void ar71xx_pci_reset(void)
- {
- 	ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-@@ -361,10 +261,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (IS_ERR(apc->cfg_base))
- 		return PTR_ERR(apc->cfg_base);
- 
--	apc->irq = platform_get_irq(pdev, 0);
--	if (apc->irq < 0)
--		return -EINVAL;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -375,8 +271,6 @@ static int ar71xx_pci_probe(struct platf
- 	/* clear bus errors */
- 	ar71xx_pci_check_error(apc, 1);
- 
--	ar71xx_pci_irq_init(apc);
--
- 	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-4.14/0037-missing-registers.patch b/target/linux/ath79/patches-4.14/0037-missing-registers.patch
deleted file mode 100644
index 9fde3d39df94..000000000000
--- a/target/linux/ath79/patches-4.14/0037-missing-registers.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-commit f3ffac90bc7266b7d917616f3233f58e8c08a196
-Author: Christian Lamparter <chunkeey@gmail.com>
-Date:   Fri Aug 10 23:24:47 2018 +0200
-
-    ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
-
-    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1229,6 +1229,10 @@
- #define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
- #define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
-+#define AR934X_ETH_CFG_TXD_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT  18
-+#define AR934X_ETH_CFG_TXE_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT  20
- 
- /*
-  * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-4.14/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-4.14/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
deleted file mode 100644
index dc0af2fe9cc6..000000000000
--- a/target/linux/ath79/patches-4.14/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 18 Mar 2019 00:54:06 +0100
-Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
-
-This adds missing GMAC register definitions for the Qualcomm Atheros
-QCA955X series MIPS SoCs.
-
-They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
-Repeater 450E's GPL tarball.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1249,7 +1249,12 @@
-  */
- 
- #define QCA955X_GMAC_REG_ETH_CFG	0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET	0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES	0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL	0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS	0x20
-+#define QCA955X_GMAC_REG_SGMII_CONFIG	0x34
-+#define QCA955X_GMAC_REG_SGMII_DEBUG	0x58
- 
- #define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0		BIT(1)
-@@ -1271,9 +1276,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK	0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT	20
- 
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET	0
-+#define QCA955X_SGMII_RESET_RX_CLK_N		BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N		BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N		BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N		BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N	BIT(4)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL1	BIT(6)
-+#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE	BIT(8)
-+#define QCA955X_MR_AN_CONTROL_RESTART_AN	BIT(9)
-+#define QCA955X_MR_AN_CONTROL_POWER_DOWN	BIT(11)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE		BIT(12)
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL0	BIT(13)
-+#define QCA955X_MR_AN_CONTROL_LOOPBACK		BIT(14)
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET		BIT(15)
-+
-+#define QCA955X_MR_AN_STATUS_EXT_CAP		BIT(0)
-+#define QCA955X_MR_AN_STATUS_LINK_UP		BIT(2)
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY		BIT(3)
-+#define QCA955X_MR_AN_STATUS_REMOTE_FAULT	BIT(4)
-+#define QCA955X_MR_AN_STATUS_AN_COMPLETE	BIT(5)
-+#define QCA955X_MR_AN_STATUS_NO_PREAMBLE	BIT(6)
-+#define QCA955X_MR_AN_STATUS_BASE_PAGE		BIT(7)
-+
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT		0
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK		0x7
-+#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE	BIT(3)
-+#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED		BIT(4)
-+#define QCA955X_SGMII_CONFIG_FORCE_SPEED		BIT(5)
-+#define QCA955X_SGMII_CONFIG_SPEED_SHIFT		6
-+#define QCA955X_SGMII_CONFIG_SPEED_MASK			0xc0
-+#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK	BIT(8)
-+#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED		BIT(9)
-+#define QCA955X_SGMII_CONFIG_MDIO_ENABLE		BIT(10)
-+#define QCA955X_SGMII_CONFIG_MDIO_PULSE			BIT(11)
-+#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE		BIT(12)
-+#define QCA955X_SGMII_CONFIG_PRBS_ENABLE		BIT(13)
-+#define QCA955X_SGMII_CONFIG_BERT_ENABLE		BIT(14)
-+
-+#define QCA955X_SGMII_DEBUG_TX_STATE_MASK	0xff
-+#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT	0
-+#define QCA955X_SGMII_DEBUG_RX_STATE_MASK	0xff00
-+#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT	8
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK	0xff0000
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT	16
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK	0xf000000
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT	24
-+
- /*
-  * QCA956X GMAC Interface
-  */
diff --git a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch b/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
deleted file mode 100644
index cf05d0fc4ac2..000000000000
--- a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
-only for RGMII mode"), delays were not disabled on driver probe
-for the Atheros AR803x PHYs, although the RX delay is enabled on
-soft and hard reset.
-
-In addition, the TX delay setting is retained on soft-reset.
-
-This patch disables both delays on config init to align the behavior
-with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -320,6 +320,14 @@ static int at803x_config_init(struct phy
- 	if (ret < 0)
- 		return ret;
- 
-+	/* Disable RX delay */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+	/* Disable TX delay */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+
- 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
- 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- 		ret = at803x_enable_rx_delay(phydev);
diff --git a/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch
deleted file mode 100644
index cc30e2d91e28..000000000000
--- a/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio
- 	.remove = ath79_gpio_remove,
- };
- 
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+	return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
- 
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-4.14/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-4.14/404-mtd-cybertan-trx-parser.patch
deleted file mode 100644
index 3cc0b0dd49ff..000000000000
--- a/target/linux/ath79/patches-4.14/404-mtd-cybertan-trx-parser.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1 +1,2 @@
-+obj-$(CONFIG_MTD_PARSER_CYBERTAN)	+= parser_cybertan.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,11 @@
-+config MTD_PARSER_CYBERTAN
-+	tristate "Parser for Cybertan format partitions"
-+	depends on MTD && (ATH79 || COMPILE_TEST)
-+	help
-+	  Cybertan has a proprietory header than encompasses a Broadcom trx
-+	  header. This driver will parse the header and take care of the
-+	  special offsets that result in the extra headers.
-+
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
- 	depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
diff --git a/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch b/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch
deleted file mode 100644
index 846b7f0a0ccc..000000000000
--- a/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -194,6 +194,12 @@ config MTD_MYLOADER_PARTS
- 	  You will still need the parsing functions to be called by the driver
- 	  for your particular device. It won't happen automatically.
- 
-+config MTD_TPLINK_PARTS
-+	tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+	depends on ATH79
-+	---help---
-+	  TBD.
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y				+= parsers/
-+obj-$(CONFIG_MTD_TPLINK_PARTS)	+= tplinkpart.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
diff --git a/target/linux/ath79/patches-4.14/408-mtd-redboot_partition_scan.patch b/target/linux/ath79/patches-4.14/408-mtd-redboot_partition_scan.patch
deleted file mode 100644
index cd41e7ceb272..000000000000
--- a/target/linux/ath79/patches-4.14/408-mtd-redboot_partition_scan.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
- 	static char nullstring[] = "unallocated";
- #endif
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
- 		while (mtd_block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
-@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
- 				goto nogood;
- 		}
- 	}
--	buf = vmalloc(master->erasesize);
--
--	if (!buf)
--		return -ENOMEM;
- 
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
-@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block :) */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;
diff --git a/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch b/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch
deleted file mode 100644
index 6377db0ac22b..000000000000
--- a/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- 	bool "Atheros devices"
- 	default y
--	depends on PCI
-+	depends on (PCI || ATH79)
- 	---help---
- 	  If you have a network (Ethernet) card belonging to this class, say Y.
- 
-@@ -78,4 +78,6 @@ config ALX
- 	  To compile this driver as a module, choose M here.  The module
- 	  will be called alx.
- 
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-4.14/425-at803x-allow-sgmii-aneg-override.patch b/target/linux/ath79/patches-4.14/425-at803x-allow-sgmii-aneg-override.patch
deleted file mode 100644
index 3b302dcd9ed3..000000000000
--- a/target/linux/ath79/patches-4.14/425-at803x-allow-sgmii-aneg-override.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -472,6 +472,13 @@ static int at803x_aneg_done(struct phy_d
- 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- 		pr_warn("803x_aneg_done: SGMII link is not ok\n");
- 		aneg_done = 0;
-+#ifdef CONFIG_OF_MDIO
-+		if (phydev->mdio.dev.of_node &&
-+				of_property_read_bool(phydev->mdio.dev.of_node,
-+				"at803x-override-sgmii-link-check")) {
-+			aneg_done = 1;
-+		}
-+#endif
- 	}
- 	/* switch back to copper page */
- 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
diff --git a/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index 2f1549710bc9..000000000000
--- a/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -83,8 +83,8 @@ obj-$(CONFIG_SCSI)		+= scsi/
- obj-y				+= nvme/
- obj-$(CONFIG_ATA)		+= ata/
- obj-$(CONFIG_TARGET_CORE)	+= target/
--obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPMI)		+= spmi/
- obj-$(CONFIG_HSI)		+= hsi/
- obj-y				+= net/
diff --git a/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch
deleted file mode 100644
index 7c24fc5e14e5..000000000000
--- a/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -101,9 +101,6 @@ static void ath79_spi_enable(struct ath7
- 	/* save CTRL register */
- 	sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- 	sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
--	/* TODO: setup speed? */
--	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
- 
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -203,6 +200,38 @@ static u32 ath79_spi_txrx_mode0(struct s
- 	return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
- 
-+static bool ath79_spi_flash_read_supported(struct spi_device *spi)
-+{
-+	if (spi->chip_select || gpio_is_valid(spi->cs_gpio))
-+		return false;
-+
-+	return true;
-+}
-+
-+static int ath79_spi_read_flash_data(struct spi_device *spi,
-+				     struct spi_flash_read_message *msg)
-+{
-+	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+	if (msg->addr_width > 3)
-+		return -EOPNOTSUPP;
-+
-+	/* disable GPIO mode */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+	memcpy_fromio(msg->buf, sp->base + msg->from, msg->len);
-+
-+	/* enable GPIO mode */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+	/* restore IOC register */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+	msg->retlen = msg->len;
-+
-+	return 0;
-+}
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- 	struct spi_master *master;
-@@ -237,6 +266,8 @@ static int ath79_spi_probe(struct platfo
- 		ret = PTR_ERR(sp->base);
- 		goto err_put_master;
- 	}
-+	master->spi_flash_read = ath79_spi_read_flash_data;
-+	master->flash_read_supported = ath79_spi_flash_read_supported;
- 
- 	sp->clk = devm_clk_get(&pdev->dev, "ahb");
- 	if (IS_ERR(sp->clk)) {
diff --git a/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index 634ce5635425..000000000000
--- a/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ *      Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port)	ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port)	ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port)	(port)
-+#define __swizzle_addr_q(port)	(port)
-+
-+# define ioswabb(a, x)           (x)
-+# define __mem_ioswabb(a, x)     (x)
-+# define ioswabw(a, x)           (x)
-+# define __mem_ioswabw(a, x)     cpu_to_le16(x)
-+# define ioswabl(a, x)           (x)
-+# define __mem_ioswabl(a, x)     cpu_to_le32(x)
-+# define ioswabq(a, x)           (x)
-+# define __mem_ioswabq(a, x)     cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -71,6 +71,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 	0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
- 
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+	unsigned long phys = CPHYSADDR(port);
-+
-+	return (phys >= AR71XX_PCI_MEM_BASE &&
-+		phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_b)
-+		return __ath79_pci_swizzle_b(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_w)
-+		return __ath79_pci_swizzle_w(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- 	u32 t;
-@@ -279,6 +318,9 @@ static int ar71xx_pci_probe(struct platf
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-+	__ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+	__ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index 8f8f349a6605..000000000000
--- a/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
--	int ret, i;
-+	int ret;
- 
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 
--	/* check the turnaround bit: the PHY should be driving it to zero, if this
--	 * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
--	 */
--	if (mdiobb_get_bit(ctrl) != 0 &&
--	    !(bus->phy_ignore_ta_mask & (1 << phy))) {
--		/* PHY didn't drive TA low -- flush any bits it
--		 * may be trying to send.
--		 */
--		for (i = 0; i < 32; i++)
--			mdiobb_get_bit(ctrl);
--
--		return 0xffff;
--	}
-+	mdiobb_get_bit(ctrl);
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
deleted file mode 100644
index a830346a31ef..000000000000
--- a/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
-  * kind, whether express or implied.
-  */
- 
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
- 	int ret;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return ret;
- }
- 
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch
deleted file mode 100644
index cff52e5add0b..000000000000
--- a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,900 +0,0 @@
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- 	const unsigned int *stop = word + ihl;
- 	unsigned int csum;
- 	int carry;
-+	unsigned int w;
- 
--	csum = word[0];
--	csum += word[1];
--	carry = (csum < word[1]);
-+	csum = net_hdr_word(word++);
-+
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[2];
--	carry = (csum < word[2]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[3];
--	carry = (csum < word[3]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	word += 4;
- 	do {
--		csum += *word;
--		carry = (csum < *word);
-+		w = net_hdr_word(word++);
-+		csum += w;
-+		carry = (csum < w);
- 		csum += carry;
--		word++;
- 	} while (word != stop);
- 
- 	return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- 	return csum_fold(csum_partial(buff, len, 0));
- }
- 
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
--					  const struct in6_addr *daddr,
--					  __u32 len, __u8 proto,
--					  __wsum sum)
--{
--	__wsum tmp;
--
--	__asm__(
--	"	.set	push		# csum_ipv6_magic\n"
--	"	.set	noreorder	\n"
--	"	.set	noat		\n"
--	"	addu	%0, %5		# proto (long in network byte order)\n"
--	"	sltu	$1, %0, %5	\n"
--	"	addu	%0, $1		\n"
--
--	"	addu	%0, %6		# csum\n"
--	"	sltu	$1, %0, %6	\n"
--	"	lw	%1, 0(%2)	# four words source address\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 0(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	addu	%0, $1		# Add final carry\n"
--	"	.set	pop"
--	: "=&r" (sum), "=&r" (tmp)
--	: "r" (saddr), "r" (daddr),
--	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
--	return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
- 
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -103,7 +103,7 @@ struct iphdr {
- 	__be32	saddr;
- 	__be32	daddr;
- 	/*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -131,7 +131,7 @@ struct ipv6hdr {
- 
- 	struct	in6_addr	saddr;
- 	struct	in6_addr	daddr;
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- 	__be16	window;
- 	__sum16	check;
- 	__be16	urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /*
-  *	The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr { 
- 	struct tcphdr hdr;
- 	__be32 		  words[5];
--}; 
-+} __attribute__((packed, aligned(2)));
- 
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
- 
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- 	__be16	dest;
- 	__be16	len;
- 	__sum16	check;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* UDP socket options */
- #define UDP_CORK	1	/* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -48,8 +48,8 @@ static bool ipv4_pkt_to_tuple(const stru
- 	if (ap == NULL)
- 		return false;
- 
--	tuple->src.u3.ip = ap[0];
--	tuple->dst.u3.ip = ap[1];
-+	tuple->src.u3.ip = net_hdr_word(ap++);
-+	tuple->dst.u3.ip = net_hdr_word(ap);
- 
- 	return true;
- }
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -82,7 +82,7 @@ struct icmphdr {
- 	} frag;
- 	__u8	reserved[4];
-   } un;
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16		in6_u.u6_addr16
- #define s6_addr32		in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
- 
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -820,10 +821,10 @@ static void tcp_v6_send_response(const s
- 	topt = (__be32 *)(t1 + 1);
- 
- 	if (tsecr) {
--		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
--		*topt++ = htonl(tsval);
--		*topt++ = htonl(tsecr);
-+		put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+		put_unaligned_be32(tsval, topt++);
-+		put_unaligned_be32(tsecr, topt++);
- 	}
- 
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
- 
- #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
-  * This structure contains configuration options per IPv6 link.
-  */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -486,7 +486,7 @@ int ipv6_recv_error(struct sock *sk, str
- 				ipv6_iface_scope_id(&sin->sin6_addr,
- 						    IP6CB(skb)->iif);
- 		} else {
--			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+			ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- 					       &sin->sin6_addr);
- 			sin->sin6_scope_id = 0;
- 		}
-@@ -835,12 +835,12 @@ int ip6_datagram_send_ctl(struct net *ne
- 			}
- 
- 			if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
--				if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+				if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- 					err = -EINVAL;
- 					goto exit_f;
- 				}
- 			}
--			fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+			fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- 			break;
- 
- 		case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -397,7 +397,7 @@ static void ip6gre_err(struct sk_buff *s
- 		return;
- 	ipv6h = (const struct ipv6hdr *)skb->data;
- 	greh = (const struct gre_base_hdr *)(skb->data + offset);
--	key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+	key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
- 
- 	t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- 				 key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -733,7 +733,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- 		goto drop;
- 	}
- 
--	pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+	pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- 	if (pkt_len <= IPV6_MAXPLEN) {
- 		__IP6_INC_STATS(net, ipv6_skb_idev(skb),
- 				IPSTATS_MIB_INHDRERRORS);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -229,5 +229,11 @@ struct callback_head {
- typedef void (*rcu_callback_t)(struct rcu_head *head);
- typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
- 
-+struct net_hdr_word {
-+       u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /*  __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1352,8 +1352,8 @@ struct sk_buff **inet_gro_receive(struct
- 	if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- 		goto out_unlock;
- 
--	id = ntohl(*(__be32 *)&iph->id);
--	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+	id = ntohl(net_hdr_word(&iph->id));
-+	flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- 	id >>= 16;
- 
- 	for (p = *head; p; p = p->next) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -466,7 +466,7 @@ static struct neighbour *ipv4_neigh_look
- 	else if (skb)
- 		pkey = &ip_hdr(skb)->daddr;
- 
--	n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+	n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- 	if (n)
- 		return n;
- 	return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -454,48 +454,53 @@ static void tcp_options_write(__be32 *pt
- 	u16 options = opts->options;	/* mungable copy */
- 
- 	if (unlikely(OPTION_MD5 & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--			       (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+			      (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- 		/* overload cookie hash location */
- 		opts->hash_location = (__u8 *)ptr;
- 		ptr += 4;
- 	}
- 
- 	if (unlikely(opts->mss)) {
--		*ptr++ = htonl((TCPOPT_MSS << 24) |
--			       (TCPOLEN_MSS << 16) |
--			       opts->mss);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+			      opts->mss);
- 	}
- 
- 	if (likely(OPTION_TS & options)) {
- 		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
--				       (TCPOLEN_SACK_PERM << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_SACK_PERM << 24) |
-+				      (TCPOLEN_SACK_PERM << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 			options &= ~OPTION_SACK_ADVERTISE;
- 		} else {
--			*ptr++ = htonl((TCPOPT_NOP << 24) |
--				       (TCPOPT_NOP << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_NOP << 24) |
-+				      (TCPOPT_NOP << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 		}
--		*ptr++ = htonl(opts->tsval);
--		*ptr++ = htonl(opts->tsecr);
-+		net_hdr_word(ptr++) = htonl(opts->tsval);
-+		net_hdr_word(ptr++) = htonl(opts->tsecr);
- 	}
- 
- 	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_NOP << 16) |
--			       (TCPOPT_SACK_PERM << 8) |
--			       TCPOLEN_SACK_PERM);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK_PERM << 8) |
-+			      TCPOLEN_SACK_PERM);
- 	}
- 
- 	if (unlikely(OPTION_WSCALE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_WINDOW << 16) |
--			       (TCPOLEN_WINDOW << 8) |
--			       opts->ws);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_WINDOW << 16) |
-+			      (TCPOLEN_WINDOW << 8) |
-+			      opts->ws);
- 	}
- 
- 	if (unlikely(opts->num_sack_blocks)) {
-@@ -503,16 +508,17 @@ static void tcp_options_write(__be32 *pt
- 			tp->duplicate_sack : tp->selective_acks;
- 		int this_sack;
- 
--		*ptr++ = htonl((TCPOPT_NOP  << 24) |
--			       (TCPOPT_NOP  << 16) |
--			       (TCPOPT_SACK <<  8) |
--			       (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK << 8) |
-+			      (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- 						     TCPOLEN_SACK_PERBLOCK)));
- 
- 		for (this_sack = 0; this_sack < opts->num_sack_blocks;
- 		     ++this_sack) {
--			*ptr++ = htonl(sp[this_sack].start_seq);
--			*ptr++ = htonl(sp[this_sack].end_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- 		}
- 
- 		tp->rx_opt.dsack = 0;
-@@ -525,13 +531,14 @@ static void tcp_options_write(__be32 *pt
- 
- 		if (foc->exp) {
- 			len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
--			*ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+			net_hdr_word(ptr) =
-+				htonl((TCPOPT_EXP << 24) | (len << 16) |
- 				     TCPOPT_FASTOPEN_MAGIC);
- 			p += TCPOLEN_EXP_FASTOPEN_BASE;
- 		} else {
- 			len = TCPOLEN_FASTOPEN_BASE + foc->len;
--			*p++ = TCPOPT_FASTOPEN;
--			*p++ = len;
-+			net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+			net_hdr_word(p++) = len;
- 		}
- 
- 		memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- 	__u8 code;		/* For newer IGMP */
- 	__sum16 csum;
- 	__be32 group;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE		1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- 	__be16	grec_nsrcs;
- 	__be32	grec_mca;
- 	__be32	grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_report {
- 	__u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- 	__be16 resv2;
- 	__be16 ngrec;
- 	struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_query {
- 	__u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- 	__u8 qqic;
- 	__be16 nsrcs;
- 	__be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -109,7 +109,7 @@ __be32 __skb_flow_get_ports(const struct
- 		ports = __skb_header_pointer(skb, thoff + poff,
- 					     sizeof(_ports), data, hlen, &_ports);
- 		if (ports)
--			return *ports;
-+			return (__be32)net_hdr_word(ports);
- 	}
- 
- 	return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -77,7 +77,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- #define ICMPV6_ROUTER_PREF_LOW		0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -89,7 +89,7 @@ struct ra_msg {
-         struct icmp6hdr		icmph;
- 	__be32			reachable_time;
- 	__be32			retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct rd_msg {
- 	struct icmp6hdr icmph;
-@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- 	const u32 *p32 = pkey;
- 
--	return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
--		(p32[1] * hash_rnd[1]) +
--		(p32[2] * hash_rnd[2]) +
--		(p32[3] * hash_rnd[3]));
-+	return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+		(net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+		(net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+		(net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
- 
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -165,7 +165,7 @@ next_knode:
- 			data = skb_header_pointer(skb, toff, 4, &hdata);
- 			if (!data)
- 				goto out;
--			if ((*data ^ key->val) & key->mask) {
-+			if ((net_hdr_word(data) ^ key->val) & key->mask) {
- 				n = rcu_dereference_bh(n->next);
- 				goto next_knode;
- 			}
-@@ -218,8 +218,8 @@ check_terminal:
- 						  &hdata);
- 			if (!data)
- 				goto out;
--			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
--							  n->fshift);
-+			sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+							  &n->sel, n->fshift);
- 		}
- 		if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- 			goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -221,7 +221,7 @@ static struct sk_buff **ipv6_gro_receive
- 			continue;
- 
- 		iph2 = (struct ipv6hdr *)(p->data + off);
--		first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+		first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
- 
- 		/* All fields must match except length and Traffic Class.
- 		 * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- 	__be32			reserved2;
- 
- 	struct in6_addr		prefix;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #include <linux/netdevice.h>
- #include <net/if_inet6.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
- 	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- 		return 0;
- 
--	from = *(__be32 *)iph;
-+	from = net_hdr_word(iph);
- 	to = from | htonl(INET_ECN_CE << 20);
--	*(__be32 *)iph = to;
-+	net_hdr_word(iph) = to;
- 	if (skb->ip_summed == CHECKSUM_COMPLETE)
- 		skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- 				     (__force __wsum)to);
-@@ -136,7 +136,7 @@ static inline int IP6_ECN_set_ce(struct
- 
- static inline void IP6_ECN_clear(struct ipv6hdr *iph)
- {
--	*(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
-+	net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
- }
- 
- static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -108,7 +108,7 @@ struct frag_hdr {
- 	__u8	reserved;
- 	__be16	frag_off;
- 	__be32	identification;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define	IP6_MF		0x0001
- #define	IP6_OFFSET	0xFFF8
-@@ -437,8 +437,8 @@ static inline void __ipv6_addr_set_half(
- 	}
- #endif
- #endif
--	addr[0] = wh;
--	addr[1] = wl;
-+	net_hdr_word(&addr[0]) = wh;
-+	net_hdr_word(&addr[1]) = wl;
- }
- 
- static inline void ipv6_addr_set(struct in6_addr *addr, 
-@@ -497,6 +497,8 @@ static inline bool ipv6_prefix_equal(con
- 	const __be32 *a1 = addr1->s6_addr32;
- 	const __be32 *a2 = addr2->s6_addr32;
- 	unsigned int pdw, pbi;
-+	/* Used for last <32-bit fraction of prefix */
-+	u32 pbia1, pbia2;
- 
- 	/* check complete u32 in prefix */
- 	pdw = prefixlen >> 5;
-@@ -505,7 +507,9 @@ static inline bool ipv6_prefix_equal(con
- 
- 	/* check incomplete u32 in prefix */
- 	pbi = prefixlen & 0x1f;
--	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+	pbia1 = net_hdr_word(&a1[pdw]);
-+	pbia2 = net_hdr_word(&a2[pdw]);
-+	if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- 		return false;
- 
- 	return true;
-@@ -605,13 +609,13 @@ static inline void ipv6_addr_set_v4mappe
-  */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
--	const __be32 *a1 = token1, *a2 = token2;
-+	const struct in6_addr *a1 = token1, *a2 = token2;
- 	int i;
- 
- 	addrlen >>= 2;
- 
- 	for (i = 0; i < addrlen; i++) {
--		__be32 xb = a1[i] ^ a2[i];
-+		__be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- 		if (xb)
- 			return i * 32 + 31 - __fls(ntohl(xb));
- 	}
-@@ -780,17 +784,18 @@ static inline int ip6_default_np_autolab
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- 				__be32 flowlabel)
- {
--	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+	net_hdr_word((__be32 *)hdr) =
-+		htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
- 
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
- 
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
- 
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
- 
- #include <linux/types.h>
-+#include <linux/in6.h>
- 
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -84,7 +84,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- 	__be32	s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
- 
- #define IP_TOS		1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t
- 	 * See include/asm-generic/bitops/le.h.
- 	 */
- 	return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
--	       addr[fn_bit >> 5];
-+	       net_hdr_word(&addr[fn_bit >> 5]);
- }
- 
- static struct fib6_node *node_alloc(void)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buf
- 
- 	/* Fast path for timestamp-only option */
- 	if (length == TCPOLEN_TSTAMP_ALIGNED
--	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+	    && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- 				       | (TCPOPT_NOP << 16)
- 				       | (TCPOPT_TIMESTAMP << 8)
- 				       | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -193,8 +193,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- 	if (!pskb_may_pull(skb, hlen))
- 		return -EINVAL;
- 
--	*spi = *(__be32 *)(skb_transport_header(skb) + offset);
--	*seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+	*spi = net_hdr_word(skb_transport_header(skb) + offset);
-+	*seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- 	return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3878,14 +3878,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- 	const __be32 *ptr = (const __be32 *)(th + 1);
- 
--	if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
--			  | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+	if (net_hdr_word(ptr) ==
-+	    htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+		  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- 		tp->rx_opt.saw_tstamp = 1;
- 		++ptr;
--		tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+		tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- 		++ptr;
--		if (*ptr)
--			tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+		if (net_hdr_word(ptr))
-+			tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+					       tp->tsoffset;
- 		else
- 			tp->rx_opt.rcv_tsecr = 0;
- 		return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
-  */
- struct pptp_addr {
- 	__u16		call_id;
-+	__u16		pad;
- 	struct in_addr	sin_addr;
- };
- 
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l
- 	/* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- 	nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- 	       ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
--	       (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+	       (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- 	       ih->hop_limit,
--	       (ntohl(*(__be32 *)ih) & 0x000fffff));
-+	       (ntohl(net_hdr_word(ih)) & 0x000fffff));
- 
- 	fragment = 0;
- 	ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -265,8 +265,10 @@ static inline bool neigh_key_eq128(const
- 	const u32 *n32 = (const u32 *)n->primary_key;
- 	const u32 *p32 = pkey;
- 
--	return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
--		(n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+	return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+		(n32[1] ^ net_hdr_word(&p32[1])) |
-+		(n32[2] ^ net_hdr_word(&p32[2])) |
-+		(n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
- 
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- 	__u8 flags;
- 	/* Inverse flags */
- 	__u16 invflags;
--};
-+} __attribute__((aligned(4)));
- 
- /* Values for "flag" field in struct arpt_ip (general arp structure).
-  * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -441,8 +441,14 @@ void inet_proto_csum_replace16(__sum16 *
- 			       bool pseudohdr)
- {
- 	__be32 diff[] = {
--		~from[0], ~from[1], ~from[2], ~from[3],
--		to[0], to[1], to[2], to[3],
-+		~net_hdr_word(&from[0]),
-+		~net_hdr_word(&from[1]),
-+		~net_hdr_word(&from[2]),
-+		~net_hdr_word(&from[3]),
-+		net_hdr_word(&to[0]),
-+		net_hdr_word(&to[1]),
-+		net_hdr_word(&to[2]),
-+		net_hdr_word(&to[3]),
- 	};
- 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
- 		*sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
-  * @b: Pointer to Ethernet header
-  *
-  * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
-  * aligned OR the platform can handle unaligned access.  This is the
-  * case for all packets coming into netif_receive_skb or similar
-  * entry points.
-@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
- 	fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- 	return fold;
- #else
--	u32 *a32 = (u32 *)((u8 *)a + 2);
--	u32 *b32 = (u32 *)((u8 *)b + 2);
-+	const u16 *a16 = a;
-+	const u16 *b16 = b;
- 
--	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
--	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+	return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+	       (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+	       (a16[6] ^ b16[6]);
- #endif
- }
- 
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct
- 
- 		th2 = tcp_hdr(p);
- 
--		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+		if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- 			NAPI_GRO_CB(p)->same_flow = 0;
- 			continue;
- 		}
-@@ -244,8 +244,8 @@ found:
- 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- 	flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- 	for (i = sizeof(*th); i < thlen; i += 4)
--		flush |= *(u32 *)((u8 *)th + i) ^
--			 *(u32 *)((u8 *)th2 + i);
-+		flush |= net_hdr_word((u8 *)th + i) ^
-+			 net_hdr_word((u8 *)th2 + i);
- 
- 	/* When we receive our second frame we can made a decision on if we
- 	 * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	hop_limit = ipv6_hdr(skb)->hop_limit;
- 
- 	/* flowlabel and prio (includes version, which shouldn't change either */
--	flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+	flowlabel = net_hdr_word(ipv6_hdr(skb));
- 
- 	ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
- 
-@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	     !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- 	     skb->mark != mark ||
- 	     ipv6_hdr(skb)->hop_limit != hop_limit ||
--	     flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+	     flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- 		err = ip6_route_me_harder(state->net, skb);
- 		if (err < 0)
- 			ret = NF_DROP_ERR(err);
