Message ID | 20191106130639.16436-1-daniel@dd-wrt.com |
---|---|
State | Accepted |
Delegated to: | Petr Štetiar |
Headers | show |
Series | [OpenWrt-Devel] ipq40xx: wpj419: use reset-gpios property for phy reset | expand |
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts index b6eb99278b..e75d07606a 100644 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -236,9 +236,10 @@ mdio@90000 { status = "okay"; - phy-reset-gpio = <&tlmm 47 0>; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <5000>; }; ess-psgmii@98000 {
The old GPIO based phy reset (phy-reset-gpio) will be removed form the ipq40xx mdio driver in the future. Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> --- .../files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)