@@ -114,6 +114,7 @@ ramips_setup_interfaces()
f5d8235-v1|\
f5d8235-v2|\
hg255d|\
+ mzk-wdpr|\
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
@@ -283,6 +283,9 @@ ramips_board_detect() {
*"MZK-W300NH2"*)
name="mzk-w300nh2"
;;
+ *"MZK-WDPR"*)
+ name="mzk-wdpr"
+ ;;
*"NA930")
name="na930"
;;
@@ -84,6 +84,7 @@ platform_check_image() {
mt7628|\
mzk-dp150n|\
mzk-w300nh2|\
+ mzk-wdpr|\
nbg-419n|\
nw718|\
oy-0001|\
new file mode 100644
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ compatible = "MZK-WDPR", "ralink,rt3052-soc";
+ model = "Planex MZK-WDPR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "Data3G";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x680000>;
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x28>;
+ };
+
+ esw@10110000 {
+ mediatek,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ otg@101c0000 {
+ status = "okay";
+ };
+};
@@ -631,6 +631,8 @@ Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
+Image/Build/Profile/MZKWDPR=$(call BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
+
Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
nw718_mtd_size=3801088
@@ -817,6 +819,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MPRA1,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
+ $(call Image/Build/Profile/MZKWDPR,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NCS601W,$(1))
$(call Image/Build/Profile/NW718,$(1))
add support for Planex MZK-WDPR. MZK-WDPR(MZK-WDPR-R01) is internet radio tuner. This patch is "network board" in MZK-WDPR. LCD board is non OpenWrt Platform. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> --- .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/MZK-WDPR.dts | 76 ++++++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + 5 files changed, 84 insertions(+) create mode 100644 target/linux/ramips/dts/MZK-WDPR.dts