diff --git a/include/image.mk b/include/image.mk
index 6b2fb1a..70b7f4f 100644
--- a/include/image.mk
+++ b/include/image.mk
@@ -327,6 +327,17 @@ define Build/netgear-dni
 	mv $@.new $@
 endef
 
+define Build/tplink-safe
+	$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+		-B $(TPLINK_BOARD_ID) -V OpenWrt.$(REVISION) \
+		-k $(word 1,$^) \
+		-r $(word 2,$^) \
+		-j \
+		$(if $(findstring sysupgrade,$1),-S) \
+		-o $@.new
+	mv $@.new $@
+endef
+
 define Build/fit
 	$(TOPDIR)/scripts/mkits.sh \
 		-D $(DEVICE_NAME) -o $@.its -k $@ \
diff --git a/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch b/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
new file mode 100644
index 0000000..09cf82c
--- /dev/null
+++ b/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
@@ -0,0 +1,15 @@
+diff -ur ../../old/compat-wireless-2015-12-03/drivers/net/wireless/ath/ath10k/core.c ./drivers/net/wireless/ath/ath10k/core.c
+--- a/drivers/net/wireless/ath/ath10k/core.c	2015-12-06 23:36:07.696995166 +0100
++++ b/drivers/net/wireless/ath/ath10k/core.c	2015-12-07 00:01:50.390388435 +0100
+@@ -1800,9 +1800,9 @@
+ 
+ 	ret = ath10k_core_get_board_id_from_otp(ar);
+ 	if (ret && ret != -EOPNOTSUPP) {
+-		ath10k_err(ar, "failed to get board id from otp: %d\n",
++		ath10k_err(ar, "failed to get board id from otp: %d, ignoring\n",
+ 			   ret);
+-		return ret;
++// 		return ret;
+ 	}
+ 
+ 	ret = ath10k_core_fetch_board_file(ar);
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index 07b5b06..46070ad6 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -19,6 +19,13 @@ r7500)
 	ucidef_set_led_default "wps" "WPS" "r7500:white:wps" "0"
 	ucidef_set_led_default "rfkill" "rfkill" "r7500:white:rfkill" "0"
 	;;
+c2600)
+	ucidef_set_led_usbdev "usb1" "USB 1" "usb_2:blue" "2-1"
+	ucidef_set_led_usbdev "usb2" "USB 2" "usb_4:blue" "4-1"
+	ucidef_set_led_netdev "wan" "WAN" "wan:blue" "eth0"
+	ucidef_set_led_netdev "lan" "LAN" "lan:blue" "br-lan"
+	ucidef_set_led_default "general" "general" "ledgnr:blue" "1"
+	;;
 *)
 	;;
 esac
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 1302a55..9f061e4 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -13,7 +13,8 @@ board=$(ipq806x_board_name)
 
 case "$board" in
 ap148 |\
-r7500)
+r7500 |\
+c2600)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
 	;;
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000..7a423de
--- /dev/null
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+ath10kcal_die() {
+	echo "ath10cal: " "$*"
+	exit 1
+}
+
+ath10kcal_from_file() {
+	local source=$1
+	local offset=$2
+	local count=$3
+
+	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath10kcal_die "failed to extract calibration data from $source"
+}
+
+ath10kcal_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath10kcal_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath10kcal_die "failed to extract calibration data from $mtd"
+}
+
+ath10kcal_patch_mac() {
+	local mac=$1
+
+	[ -z "$mac" ] && return
+
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/ipq806x.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(ipq806x_board_name)
+
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case $board in
+	c2600)
+		ath10kcal_extract "0:ART" 4096 12064
+		;;
+	esac
+	;;
+"ath10k/cal-pci-0001:01:00.0.bin")
+	case $board in
+	c2600)
+		ath10kcal_extract "0:ART" 20480 12064
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index 5b27bde..262183f 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -23,6 +23,9 @@ ipq806x_board_detect() {
 	*"R7500")
 		name="r7500"
 		;;
+	*"C2600")
+		name="c2600"
+		;;
 	esac
 
 	[ -z "$name" ] && name="unknown"
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index c0e19a1..7fc08bb 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -11,6 +11,14 @@ platform_check_image() {
 		nand_do_platform_check $board $1
 		return $?;
 		;;
+	c2600)
+		local magic_long="$(get_magic_long "$1")"
+		[ "$magic_long" != "27051956" ] && {
+			echo "Invalid image, bad magic: $magic_long"
+			return 1
+		}
+		return 0;
+		;;
 	*)
 		return 1;
 	esac
@@ -27,4 +35,28 @@ platform_pre_upgrade() {
 	esac
 }
 
-# use default for platform_do_upgrade()
+platform_do_upgrade() {
+	local board=$(ipq806x_board_name)
+
+	case "$board" in
+	c2600)
+		platform_do_upgrade_c2600 "$ARGV"
+		;;
+	esac
+}
+
+platform_do_upgrade_c2600() {
+	local kernpart="0:HLOS"
+	local rootfspart="rootfs"
+	
+	local kernel_mtd="$(find_mtd_index $kernpart)"
+	
+	local kerndev="/dev/mtd${kernel_mtd}"
+	local rootfsdev=$rootfspart
+	
+	PART_NAME="${kerndev}:${rootfsdev}"
+	MTD_CONFIG_ARGS="-s 0x200000"
+		
+	default_do_upgrade "$ARGV"
+	
+}
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index 14cf442..956d724 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -85,6 +85,19 @@ define Device/DniImage
 endef
 DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_BLOCK_SIZE DEVICE_PAGE_SIZE
 
+define Device/TpSafeImage
+	PROFILES += $$(DEVICE_NAME)
+	FILESYSTEMS := squashfs
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none
+	KERNEL_NAME := zImage
+	TPLINK_BOARD_ID :=
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := tplink-safe factory
+	IMAGE/sysupgrade.bin := tplink-safe sysupgrade
+endef
+DEVICE_VARS += TPLINK_BOARD_ID
+
 define Device/AP148
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -103,6 +116,15 @@ define Device/AP148-legacy
 	BOARD_NAME := ap148
 endef
 
+define Device/C2600
+	$(call Device/TpSafeImage)
+	DEVICE_DTS := qcom-ipq8064-c2600
+	BLOCKSIZE := 128KiB
+	PAGESIZE := 2048
+	BOARD_NAME := c2600
+	TPLINK_BOARD_ID := C2600
+endef
+
 define Device/DB149
 	$(call Device/FitImage)
 	DEVICE_DTS := qcom-ipq8064-db149
@@ -121,6 +143,6 @@ define Device/R7500
 	BOARD_NAME := r7500
 endef
 
-TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
+TARGET_DEVICES += AP148 AP148-legacy C2600 DB149 R7500
 
 $(eval $(call BuildImage))
diff --git a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
new file mode 100644
index 0000000..536ae57
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
@@ -0,0 +1,300 @@
+diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+--- a/arch/arm/boot/dts/Makefile	2015-11-25 22:51:15.148899604 +0100
++++ b/arch/arm/boot/dts/Makefile	2015-12-06 14:33:31.092396982 +0100
+@@ -362,6 +362,7 @@
+ 	qcom-ipq8064-ap148.dtb \
+ 	qcom-ipq8064-db149.dtb \
+ 	qcom-ipq8064-r7500.dtb \
++	qcom-ipq8064-c2600.dtb \
+ 	qcom-msm8660-surf.dtb \
+ 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8974-sony-xperia-honami.dtb
+diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts	1970-01-01 01:00:00.000000000 +0100
++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts	2015-12-06 14:20:05.152365670 +0100
+@@ -0,0 +1,285 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "TP-Link Archer C2600";
++	compatible = "tplink,c2600", "qcom,ipq8064";
++
++	memory@0 {
++		reg = <0x42000000 0x1e000000>;
++		device_type = "memory";
++	};
++
++	reserved-memory {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++		rsvd@41200000 {
++			reg = <0x41200000 0x300000>;
++			no-map;
++		};
++	};
++
++	aliases {
++		serial0 = &uart4;
++		mdio-gpio0 = &mdio0;
++	};
++
++	chosen {
++		linux,stdout-path = "serial0:115200n8";
++	};
++
++	soc {
++		pinmux@800000 {
++			i2c4_pins: i2c4_pinmux {
++				pins = "gpio12", "gpio13";
++				function = "gsbi4";
++				bias-disable;
++			};
++
++			spi_pins: spi_pins {
++				mux {
++					pins = "gpio18", "gpio19", "gpio21";
++					function = "gsbi5";
++					drive-strength = <10>;
++					bias-none;
++				};
++			};
++
++			nand_pins: nand_pins {
++				mux {
++					pins = "gpio34", "gpio35", "gpio36",
++					       "gpio37", "gpio38", "gpio39",
++					       "gpio40", "gpio41", "gpio42",
++					       "gpio43", "gpio44", "gpio45",
++					       "gpio46", "gpio47";
++					function = "nand";
++					drive-strength = <10>;
++					bias-disable;
++				};
++
++				pullups {
++					pins = "gpio39";
++					bias-pull-up;
++				};
++
++				hold {
++					pins = "gpio40", "gpio41", "gpio42",
++					       "gpio43", "gpio44", "gpio45",
++					       "gpio46", "gpio47";
++					bias-bus-hold;
++				};
++			};
++
++			mdio0_pins: mdio0_pins {
++				mux {
++					pins = "gpio0", "gpio1";
++					function = "gpio";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++
++			rgmii2_pins: rgmii2_pins {
++				mux {
++					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
++					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
++					function = "rgmii2";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++		};
++
++		gsbi@16300000 {
++			qcom,mode = <GSBI_PROT_I2C_UART>;
++			status = "ok";
++			serial@16340000 {
++				status = "ok";
++			};
++			/*
++			 * The i2c device on gsbi4 should not be enabled.
++			 * On ipq806x designs gsbi4 i2c is meant for exclusive
++			 * RPM usage. Turning this on in kernel manifests as
++			 * i2c failure for the RPM.
++			 */
++		};
++
++		gsbi5: gsbi@1a200000 {
++			qcom,mode = <GSBI_PROT_SPI>;
++			status = "ok";
++
++			spi4: spi@1a280000 {
++				status = "ok";
++				spi-max-frequency = <50000000>;
++
++				pinctrl-0 = <&spi_pins>;
++				pinctrl-names = "default";
++
++				cs-gpios = <&qcom_pinmux 20 0>;
++
++				flash: m25p80@0 {
++					compatible = "s25fl256s1";
++					#address-cells = <1>;
++					#size-cells = <1>;
++					spi-max-frequency = <50000000>;
++					reg = <0>;
++
++					linux,part-probe = "qcom-smem";
++				};
++			};
++		};
++
++		phy@100f8800 {		/* USB3 port 1 HS phy */
++			status = "ok";
++		};
++
++		phy@100f8830 {		/* USB3 port 1 SS phy */
++			status = "ok";
++		};
++
++		phy@110f8800 {		/* USB3 port 0 HS phy */
++			status = "ok";
++		};
++
++		phy@110f8830 {		/* USB3 port 0 SS phy */
++			status = "ok";
++		};
++
++		usb30@0 {
++			status = "ok";
++		};
++
++		usb30@1 {
++			status = "ok";
++		};
++
++		pcie0: pci@1b500000 {
++			status = "ok";
++			phy-tx0-term-offset = <7>;
++		};
++
++		pcie1: pci@1b700000 {
++			status = "ok";
++			phy-tx0-term-offset = <7>;
++		};
++
++		mdio0: mdio {
++			compatible = "virtual,mdio-gpio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++			pinctrl-0 = <&mdio0_pins>;
++			pinctrl-names = "default";
++
++			phy0: ethernet-phy@0 {
++				device_type = "ethernet-phy";
++				reg = <0>;
++				qca,ar8327-initvals = <
++					0x00004 0x7600000   /* PAD0_MODE */
++					0x00008 0x1000000   /* PAD5_MODE */
++					0x0000c 0x80        /* PAD6_MODE */
++					0x000e4 0xaa545     /* MAC_POWER_SEL */
++					0x000e0 0xc74164de  /* SGMII_CTRL */
++					0x0007c 0x4e        /* PORT0_STATUS */
++					0x00094 0x4e        /* PORT6_STATUS */
++					>;
++			};
++
++			phy4: ethernet-phy@4 {
++				device_type = "ethernet-phy";
++				reg = <4>;
++			};
++		};
++
++		gmac1: ethernet@37200000 {
++			status = "ok";
++			phy-mode = "rgmii";
++			qcom,id = <1>;
++
++			pinctrl-0 = <&rgmii2_pins>;
++			pinctrl-names = "default";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
++		};
++
++		gmac2: ethernet@37400000 {
++			status = "ok";
++			phy-mode = "sgmii";
++			qcom,id = <2>;
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
++		};
++	};
++        
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		wifi {
++			label = "wifi";
++			gpios = <&qcom_pinmux 49 1>;
++			linux,code = <KEY_WLAN>;
++		};
++
++		reset {
++			label = "reset";
++			gpios = <&qcom_pinmux 64 1>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&qcom_pinmux 65 1>;
++			linux,code = <KEY_WPS_BUTTON>;
++		};
++                ledgeneral {
++			label = "ledgeneral";
++			gpios = <&qcom_pinmux 16 1>;
++			linux,code = <KEY_DOLLAR>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		lan {
++			label = "lan:blue";
++			gpios = <&qcom_pinmux 6 0>;
++		};
++                usb4 {
++			label = "usb_4:blue";
++			gpios = <&qcom_pinmux 7 0>;
++		};
++                usb2 {
++			label = "usb_2:blue";
++			gpios = <&qcom_pinmux 8 0>;
++		};
++                wps {
++			label = "wps:blue";
++			gpios = <&qcom_pinmux 9 0>;
++		};
++                wan_blue {
++			label = "wan:blue";
++			gpios = <&qcom_pinmux 33 1>;
++		};
++                status {
++			label = "status:blue";
++			gpios = <&qcom_pinmux 53 0>;
++			default-state = "on";
++		};
++                ledgnr {
++			label = "ledgnr:blue";
++			gpios = <&qcom_pinmux 66 0>;
++		};
++        };
++};
++
++&adm_dma {
++	status = "ok";
++};
diff --git a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
new file mode 100644
index 0000000..ada5254
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
@@ -0,0 +1,300 @@
+diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+--- a/arch/arm/boot/dts/Makefile	2015-11-25 22:51:15.148899604 +0100
++++ b/arch/arm/boot/dts/Makefile	2015-12-06 14:33:31.092396982 +0100
+@@ -453,6 +453,7 @@
+ 	qcom-ipq8064-ap148.dtb \
+ 	qcom-ipq8064-db149.dtb \
+ 	qcom-ipq8064-r7500.dtb \
++	qcom-ipq8064-c2600.dtb \
+ 	qcom-msm8660-surf.dtb \
+ 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8974-sony-xperia-honami.dtb
+diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts	1970-01-01 01:00:00.000000000 +0100
++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts	2015-12-06 14:20:05.152365670 +0100
+@@ -0,0 +1,285 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "TP-Link Archer C2600";
++	compatible = "tplink,c2600", "qcom,ipq8064";
++
++	memory@0 {
++		reg = <0x42000000 0x1e000000>;
++		device_type = "memory";
++	};
++
++	reserved-memory {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++		rsvd@41200000 {
++			reg = <0x41200000 0x300000>;
++			no-map;
++		};
++	};
++
++	aliases {
++		serial0 = &uart4;
++		mdio-gpio0 = &mdio0;
++	};
++
++	chosen {
++		linux,stdout-path = "serial0:115200n8";
++	};
++
++	soc {
++		pinmux@800000 {
++			i2c4_pins: i2c4_pinmux {
++				pins = "gpio12", "gpio13";
++				function = "gsbi4";
++				bias-disable;
++			};
++
++			spi_pins: spi_pins {
++				mux {
++					pins = "gpio18", "gpio19", "gpio21";
++					function = "gsbi5";
++					drive-strength = <10>;
++					bias-none;
++				};
++			};
++
++			nand_pins: nand_pins {
++				mux {
++					pins = "gpio34", "gpio35", "gpio36",
++					       "gpio37", "gpio38", "gpio39",
++					       "gpio40", "gpio41", "gpio42",
++					       "gpio43", "gpio44", "gpio45",
++					       "gpio46", "gpio47";
++					function = "nand";
++					drive-strength = <10>;
++					bias-disable;
++				};
++
++				pullups {
++					pins = "gpio39";
++					bias-pull-up;
++				};
++
++				hold {
++					pins = "gpio40", "gpio41", "gpio42",
++					       "gpio43", "gpio44", "gpio45",
++					       "gpio46", "gpio47";
++					bias-bus-hold;
++				};
++			};
++
++			mdio0_pins: mdio0_pins {
++				mux {
++					pins = "gpio0", "gpio1";
++					function = "gpio";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++
++			rgmii2_pins: rgmii2_pins {
++				mux {
++					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
++					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
++					function = "rgmii2";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++		};
++
++		gsbi@16300000 {
++			qcom,mode = <GSBI_PROT_I2C_UART>;
++			status = "ok";
++			serial@16340000 {
++				status = "ok";
++			};
++			/*
++			 * The i2c device on gsbi4 should not be enabled.
++			 * On ipq806x designs gsbi4 i2c is meant for exclusive
++			 * RPM usage. Turning this on in kernel manifests as
++			 * i2c failure for the RPM.
++			 */
++		};
++
++		gsbi5: gsbi@1a200000 {
++			qcom,mode = <GSBI_PROT_SPI>;
++			status = "ok";
++
++			spi4: spi@1a280000 {
++				status = "ok";
++				spi-max-frequency = <50000000>;
++
++				pinctrl-0 = <&spi_pins>;
++				pinctrl-names = "default";
++
++				cs-gpios = <&qcom_pinmux 20 0>;
++
++				flash: m25p80@0 {
++					compatible = "s25fl256s1";
++					#address-cells = <1>;
++					#size-cells = <1>;
++					spi-max-frequency = <50000000>;
++					reg = <0>;
++
++					linux,part-probe = "qcom-smem";
++				};
++			};
++		};
++
++		phy@100f8800 {		/* USB3 port 1 HS phy */
++			status = "ok";
++		};
++
++		phy@100f8830 {		/* USB3 port 1 SS phy */
++			status = "ok";
++		};
++
++		phy@110f8800 {		/* USB3 port 0 HS phy */
++			status = "ok";
++		};
++
++		phy@110f8830 {		/* USB3 port 0 SS phy */
++			status = "ok";
++		};
++
++		usb30@0 {
++			status = "ok";
++		};
++
++		usb30@1 {
++			status = "ok";
++		};
++
++		pcie0: pci@1b500000 {
++			status = "ok";
++			phy-tx0-term-offset = <7>;
++		};
++
++		pcie1: pci@1b700000 {
++			status = "ok";
++			phy-tx0-term-offset = <7>;
++		};
++
++		mdio0: mdio {
++			compatible = "virtual,mdio-gpio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++			pinctrl-0 = <&mdio0_pins>;
++			pinctrl-names = "default";
++
++			phy0: ethernet-phy@0 {
++				device_type = "ethernet-phy";
++				reg = <0>;
++				qca,ar8327-initvals = <
++					0x00004 0x7600000   /* PAD0_MODE */
++					0x00008 0x1000000   /* PAD5_MODE */
++					0x0000c 0x80        /* PAD6_MODE */
++					0x000e4 0xaa545     /* MAC_POWER_SEL */
++					0x000e0 0xc74164de  /* SGMII_CTRL */
++					0x0007c 0x4e        /* PORT0_STATUS */
++					0x00094 0x4e        /* PORT6_STATUS */
++					>;
++			};
++
++			phy4: ethernet-phy@4 {
++				device_type = "ethernet-phy";
++				reg = <4>;
++			};
++		};
++
++		gmac1: ethernet@37200000 {
++			status = "ok";
++			phy-mode = "rgmii";
++			qcom,id = <1>;
++
++			pinctrl-0 = <&rgmii2_pins>;
++			pinctrl-names = "default";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
++		};
++
++		gmac2: ethernet@37400000 {
++			status = "ok";
++			phy-mode = "sgmii";
++			qcom,id = <2>;
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
++		};
++	};
++        
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		wifi {
++			label = "wifi";
++			gpios = <&qcom_pinmux 49 1>;
++			linux,code = <KEY_WLAN>;
++		};
++
++		reset {
++			label = "reset";
++			gpios = <&qcom_pinmux 64 1>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&qcom_pinmux 65 1>;
++			linux,code = <KEY_WPS_BUTTON>;
++		};
++                ledgeneral {
++			label = "ledgeneral";
++			gpios = <&qcom_pinmux 16 1>;
++			linux,code = <KEY_DOLLAR>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		lan {
++			label = "lan:blue";
++			gpios = <&qcom_pinmux 6 0>;
++		};
++                usb4 {
++			label = "usb_4:blue";
++			gpios = <&qcom_pinmux 7 0>;
++		};
++                usb2 {
++			label = "usb_2:blue";
++			gpios = <&qcom_pinmux 8 0>;
++		};
++                wps {
++			label = "wps:blue";
++			gpios = <&qcom_pinmux 9 0>;
++		};
++                wan_blue {
++			label = "wan:blue";
++			gpios = <&qcom_pinmux 33 1>;
++		};
++                status {
++			label = "status:blue";
++			gpios = <&qcom_pinmux 53 0>;
++			default-state = "on";
++		};
++                ledgnr {
++			label = "ledgnr:blue";
++			gpios = <&qcom_pinmux 66 0>;
++		};
++        };
++};
++
++&adm_dma {
++	status = "ok";
++};
diff --git a/target/linux/ipq806x/profiles/tplink.mk b/target/linux/ipq806x/profiles/tplink.mk
new file mode 100644
index 0000000..d3f5a6c
--- /dev/null
+++ b/target/linux/ipq806x/profiles/tplink.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2014 The Linux Foundation. All rights reserved.
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/C2600
+	NAME:=TP-Link Archer C2600
+	PACKAGES:= \
+		kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+		kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
+		kmod-ath10k ath10k-firmware-qca99x0 wpad-mini
+endef
+
+define Profile/C2600/Description
+	Package set for the TP-Link Archer C2600.
+endef
+$(eval $(call Profile,C2600))
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 77a894b..f43ffd5 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -105,6 +105,8 @@ static const uint8_t md5_salt[16] = {
 /** Vendor information for CPE210/220/510/520 */
 static const char cpe510_vendor[] = "CPE510(TP-LINK|UN|N300-5):1.0\r\n";
 
+/** Vendor information for C2600 */
+static const char c2600_vendor[] = "";
 
 /**
     The flash partition table for CPE210/220/510/520;
@@ -128,6 +130,39 @@ static const struct flash_partition_entry cpe510_partitions[] = {
 };
 
 /**
+    The flash partition table for C2600;
+    it is the same as the one used by the stock images.
+*/
+static const struct flash_partition_entry c2600_partitions[] = {
+        {"SBL1", 0x00000, 0x20000},
+        {"MIBIB", 0x20000, 0x20000},
+        {"SBL2", 0x40000, 0x20000},
+        {"SBL3", 0x60000, 0x30000},
+        {"DDRCONFIG", 0x90000, 0x10000},
+        {"SSD", 0xa0000, 0x10000},
+        {"TZ", 0xb0000, 0x30000},
+        {"RPM", 0xe0000, 0x20000},
+        {"fs-uboot", 0x100000, 0x70000},
+        {"uboot-env", 0x170000, 0x40000},
+        {"radio", 0x1b0000, 0x40000},
+        {"os-image", 0x1f0000, 0x200000},
+        {"file-system", 0x3f0000, 0x1b00000},
+        {"default-mac", 0x1ef0000, 0x00200},
+        {"pin", 0x1ef0200, 0x00200},
+        {"product-info", 0x1ef0400, 0x0fc00},
+        {"partition-table", 0x1f00000, 0x10000},
+        {"soft-version", 0x1f10000, 0x10000},
+        {"support-list", 0x1f20000, 0x10000},
+        {"profile", 0x1f30000, 0x10000},
+        {"default-config", 0x1f40000, 0x10000},
+        {"user-config", 0x1f50000, 0x40000},
+        {"qos-db", 0x1f90000, 0x40000},
+        {"usb-config", 0x1fd0000, 0x10000},
+        {"log", 0x1fe0000, 0x20000},
+	{NULL, 0, 0}
+};
+
+/**
    The support list for CPE210/220/510/520
 */
 static const char cpe510_support_list[] =
@@ -141,6 +176,13 @@ static const char cpe510_support_list[] =
 	"CPE220(TP-LINK|UN|N300-2):1.0\r\n"
 	"CPE220(TP-LINK|UN|N300-2):1.1\r\n";
 
+/**
+   The support list for C2600
+*/
+static const char c2600_support_list[] =
+	"SupportList:\r\n"
+	"{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n";
+        
 #define error(_ret, _errno, _str, ...)				\
 	do {							\
 		fprintf(stderr, _str ": %s\n", ## __VA_ARGS__,	\
@@ -240,14 +282,14 @@ static struct image_partition_entry make_soft_version(uint32_t rev) {
 }
 
 /** Generates the support-list partition */
-static struct image_partition_entry make_support_list(const char *support_list) {
+static struct image_partition_entry make_support_list(const char *support_list, bool trailzero) {
 	size_t len = strlen(support_list);
 	struct image_partition_entry entry = alloc_image_partition("support-list", len + 9);
 
 	put32(entry.data, len);
 	memset(entry.data+4, 0, 4);
 	memcpy(entry.data+8, support_list, len);
-	entry.data[len+8] = '\xff';
+	entry.data[len+8] = trailzero ? '\x00' : '\xff';
 
 	return entry;
 }
@@ -436,6 +478,37 @@ static void * generate_sysupgrade_image(const struct flash_partition_entry *flas
 	return image;
 }
 
+static void * generate_sysupgrade_image_c2600(const struct flash_partition_entry *flash_parts, const struct image_partition_entry *image_parts, size_t *len) {
+	const struct flash_partition_entry *flash_os_image = &flash_parts[11];
+	const struct flash_partition_entry *flash_file_system = &flash_parts[12];
+
+	const struct image_partition_entry *image_os_image = &image_parts[3];
+	const struct image_partition_entry *image_file_system = &image_parts[4];
+
+	assert(strcmp(flash_os_image->name, "os-image") == 0);
+	assert(strcmp(flash_file_system->name, "file-system") == 0);
+
+	assert(strcmp(image_os_image->name, "os-image") == 0);
+	assert(strcmp(image_file_system->name, "file-system") == 0);
+
+	if (image_os_image->size > flash_os_image->size)
+		error(1, 0, "kernel image too big (more than %u bytes)", (unsigned)flash_os_image->size);
+	if (image_file_system->size > flash_file_system->size)
+		error(1, 0, "rootfs image too big (more than %u bytes)", (unsigned)flash_file_system->size);
+
+	*len = flash_file_system->base - flash_os_image->base + image_file_system->size;
+
+	uint8_t *image = malloc(*len);
+	if (!image)
+		error(1, errno, "malloc");
+
+	memset(image, 0xff, *len);
+
+	memcpy(image, image_os_image->data, image_os_image->size);
+	memcpy(image + flash_file_system->base - flash_os_image->base, image_file_system->data, image_file_system->size);
+
+	return image;
+}
 
 /** Generates an image for CPE210/220/510/520 and writes it to a file */
 static void do_cpe510(const char *output, const char *kernel_image, const char *rootfs_image, uint32_t rev, bool add_jffs2_eof, bool sysupgrade) {
@@ -443,7 +516,7 @@ static void do_cpe510(const char *output, const char *kernel_image, const char *
 
 	parts[0] = make_partition_table(cpe510_partitions);
 	parts[1] = make_soft_version(rev);
-	parts[2] = make_support_list(cpe510_support_list);
+	parts[2] = make_support_list(cpe510_support_list,false);
 	parts[3] = read_file("os-image", kernel_image, false);
 	parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
 
@@ -470,6 +543,39 @@ static void do_cpe510(const char *output, const char *kernel_image, const char *
 		free_image_partition(parts[i]);
 }
 
+/** Generates an image for C2600 and writes it to a file */
+static void do_c2600(const char *output, const char *kernel_image, const char *rootfs_image, uint32_t rev, bool add_jffs2_eof, bool sysupgrade) {
+	struct image_partition_entry parts[6] = {};
+
+	parts[0] = make_partition_table(c2600_partitions);
+	parts[1] = make_soft_version(rev);
+	parts[2] = make_support_list(c2600_support_list,true);
+	parts[3] = read_file("os-image", kernel_image, false);
+	parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
+
+	size_t len;
+	void *image;
+	if (sysupgrade)
+		image = generate_sysupgrade_image_c2600(c2600_partitions, parts, &len);
+	else
+		image = generate_factory_image(c2600_vendor, parts, &len);
+
+	FILE *file = fopen(output, "wb");
+	if (!file)
+		error(1, errno, "unable to open output file");
+
+	if (fwrite(image, len, 1, file) != 1)
+		error(1, 0, "unable to write output file");
+
+	fclose(file);
+
+	free(image);
+
+	size_t i;
+	for (i = 0; parts[i].name; i++)
+		free_image_partition(parts[i]);
+}
+
 
 /** Usage output */
 static void usage(const char *argv0) {
@@ -552,6 +658,8 @@ int main(int argc, char *argv[]) {
 
 	if (strcmp(board, "CPE510") == 0)
 		do_cpe510(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade);
+	else if (strcmp(board, "C2600") == 0)
+		do_c2600(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade);
 	else
 		error(1, 0, "unsupported board %s", board);
 
