From patchwork Thu Dec 3 12:08:09 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Careba X-Patchwork-Id: 552220 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from arrakis.dune.hu (arrakis.dune.hu [78.24.191.176]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4D1E41401DA for ; Thu, 3 Dec 2015 23:09:29 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=yahoo.com header.i=@yahoo.com header.b=Jk6e1q4j; dkim-atps=neutral Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 82E7428BD61; Thu, 3 Dec 2015 13:08:54 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on arrakis.dune.hu X-Spam-Level: X-Spam-Status: No, score=-2.5 required=5.0 tests=BAYES_00,FREEMAIL_FROM, RP_MATCHES_RCVD,T_DKIM_INVALID autolearn=unavailable version=3.3.2 Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 539E228BD32 for ; Thu, 3 Dec 2015 13:08:45 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 CL_IP_EQ_HELO_IP=-2 (check from: .yahoo. - helo: .nm27-vm1.bullet.mail.bf1.yahoo. - helo-domain: .yahoo.) FROM/MX_MATCHES_HELO(DOMAIN)=-2; rate: -8.5 Received: from nm27-vm1.bullet.mail.bf1.yahoo.com (nm27-vm1.bullet.mail.bf1.yahoo.com [98.139.213.148]) by arrakis.dune.hu (Postfix) with ESMTPS for ; Thu, 3 Dec 2015 13:08:21 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s2048; t=1449144499; bh=4F/wNzCl8Xr/ajJNFjXWUxzjbPI0orUVpijgLFgfUqk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From:Subject; b=Jk6e1q4j26bFt4zMPnzWZfUsKMFhSgh4dZVjpToR9Z8eZKFqIDI7eVP9lt1VyyLM3I4xZ4XReTEgtatlAjorv+8qMTcbh6s4MVUtevLySnnU/Ut3Q4E+50Kju8/qg4XRcnAYYEJNT6AjXIwFSADjM7HYo9Y+OLsJCCyR2onBInTzEwWLruKfhns47mhrMhcnFYvi1t75PVkxYGGiLpaY89q7SuXNFCd991cIXQv3gV/PthL1sFSZbGjzr3WORgWdCrTrkZu7fDxUtBG/TBufMiw8OGLQzGBBbvSWi6XoyXk710VpmCAqB7njFVS23e7aslYn3upP//wP/RwFYLDxeg== Received: from [98.139.170.179] by nm27.bullet.mail.bf1.yahoo.com with NNFMP; 03 Dec 2015 12:08:19 -0000 Received: from [98.139.211.162] by tm22.bullet.mail.bf1.yahoo.com with NNFMP; 03 Dec 2015 12:08:19 -0000 Received: from [127.0.0.1] by smtp219.mail.bf1.yahoo.com with NNFMP; 03 Dec 2015 12:08:19 -0000 X-Yahoo-Newman-Id: 513677.72492.bm@smtp219.mail.bf1.yahoo.com X-Yahoo-Newman-Property: ymail-3 X-YMail-OSG: o.gqH6sVM1mdNgEuYLyNFd5nso8Tu3q.njIkJrqzfljY7me 4i92p6r9ogK3.T57_hfOgtFtua3T9_R55cPZEcq81BaIdytyZNeQEja_mWjA 3fwnHSm23Nh4aSq7wiruIyco5VVWcshuiyAhJ2B6YEePSgOyZWHNC2hfDTKA TBCQXFQcpMQTT11BnW.uz6xFMkEPimd9rBCux039lHz6ci3bNooVjFomDbKg H8G_2g4c2ksRzIs7O3DPIqEAxRyujRZwhNHy7GNbCjtvxRwWLYDBzNPeX890 vDHARJ1bCxtR1V1LAZfgR_8zoGd5JMNGZT0tzlLyg2Bjs6JCcKPqoY0rh2Nd 15Tvj2dyzlhxNaRlERxI13w4wd0IyFFIWQHkjLRLo7XUSOavgkgAeC10sKzY Cfa_Ni1Jsvcy2EJMCLy_gdBHcAzCCH26WEmnPrzLkI3lFVP9jCi_GlKKBvKh MUGNh0o_bxUnyF7BhNRYRvq3X0DxKUNXZcUsZnmV0zZ0.sl0Jm5TiIrb6Uwg 2nrU7PUkhlIZPYF0nYdF5TX_iMrdtlUO.mkpnoTthSA-- X-Yahoo-SMTP: adF5FPaswBDq.GpHrd8D4UL8LrDj1dI- From: Sebastian Careba To: openwrt-devel@lists.openwrt.org Date: Thu, 3 Dec 2015 14:08:09 +0200 Message-Id: <1449144489-606-1-git-send-email-nitroshift@yahoo.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <20151203113001.13475.91070@ozlabs.org> References: <20151203113001.13475.91070@ozlabs.org> Subject: [OpenWrt-Devel] [PATCH] [v5] ramips: add initial support for MQmaker WiTi board X-BeenThere: openwrt-devel@lists.openwrt.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: OpenWrt Development List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: openwrt-devel-bounces@lists.openwrt.org Sender: "openwrt-devel" The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 5th submission that reverts Patch v2 and introduces the use of 'jedec,spi-nor' to detect the flash chip ID. Patch v1 added initial support for MQmaker WiTi board. The device tree is based on PBR-M1. Patch v2 changed the flash chip ID (w25q256 to gd25q128). Patch v3 fixed the left-out entry for WiTi in 02_network. Patch v4 fixed the naming scheme for MQmaker WiTi board. Signed-off-by: Sebastian Careba --- .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/WITI.dts | 142 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 7 +- target/linux/ramips/mt7621/profiles/mqmaker.mk | 20 +++ 7 files changed, 174 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/WITI.dts create mode 100644 target/linux/ramips/mt7621/profiles/mqmaker.mk diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7e51229..0cdecb0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -81,6 +81,7 @@ ramips_setup_interfaces() wf-2881|\ whr-300hp2|\ whr-600d|\ + witi|\ wsr-1166|\ wsr-600|\ wt1520|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index ff5fbf2..41e3a34 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -137,6 +137,7 @@ get_status_led() { ;; pbr-m1|\ w306r-v20|\ + witi|\ zbt-wr8305rt) status_led="$board:green:sys" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 92e13c0..c002b97 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -391,6 +391,9 @@ ramips_board_detect() { *"WHR-G300N") name="whr-g300n" ;; + *"WiTi") + name="witi" + ;; *"WIZARD 8800") name="wizard8800" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 073593a..4ec3008 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -113,6 +113,7 @@ platform_check_image() { whr-300hp2|\ whr-600d|\ whr-g300n|\ + witi|\ wizfi630a|\ wl-330n|\ wl-330n3g|\ diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts new file mode 100644 index 0000000..cd6c7df --- /dev/null +++ b/target/linux/ramips/dts/WITI.dts @@ -0,0 +1,142 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "MQmaker WiTi"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + + pcf8563: rtc@51 { + status = "okay"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "witi:green:power"; + gpios = <&gpio0 25 1>; + }; + + sys { + label = "witi:green:sys"; + gpios = <&gpio0 24 1>; + }; + + internet { + label = "witi:green:internet"; + gpios = <&gpio0 23 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e58d012..478ead9 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -954,7 +954,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 witi wf-2881 zbt-wg2626 endif define Device/mt7621 @@ -1004,6 +1004,11 @@ define Device/sap-g3200u3 DTS := SAP-G3200U3 endef +define Device/witi + DTS := WITI + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef + define Device/zbt-wg2626 DTS := ZBT-WG2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) diff --git a/target/linux/ramips/mt7621/profiles/mqmaker.mk b/target/linux/ramips/mt7621/profiles/mqmaker.mk new file mode 100644 index 0000000..561b040 --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/mqmaker.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/witi + NAME:=MQmaker WiTi + FEATURES+=rtc + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \ + kmod-rtc-pcf8563 +endef + +define Profile/witi/Description + Package set compatible with MQmaker WiTi board. +endef +$(eval $(call Profile,witi))