new file mode 100644
@@ -0,0 +1,13 @@
===================================================================
@@ -352,7 +352,7 @@ static const struct spi_device_id m25p_i
{"en25q64"}, {"en25qh128"}, {"en25qh256"},
{"f25l32pa"},
{"mr25h256"}, {"mr25h10"},
- {"gd25q32"}, {"gd25q64"},
+ {"gd25q32"}, {"gd25q64"}, {"gd25q128"},
{"160s33b"}, {"320s33b"}, {"640s33b"},
{"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
{"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
@@ -81,6 +81,7 @@ ramips_setup_interfaces()
wf-2881|\
whr-300hp2|\
whr-600d|\
+ witi|\
wsr-1166|\
wsr-600|\
wt1520|\
@@ -137,6 +137,7 @@ get_status_led() {
;;
pbr-m1|\
w306r-v20|\
+ witi|\
zbt-wr8305rt)
status_led="$board:green:sys"
;;
@@ -391,6 +391,9 @@ ramips_board_detect() {
*"WHR-G300N")
name="whr-g300n"
;;
+ *"WiTi")
+ name="witi"
+ ;;
*"WIZARD 8800")
name="wizard8800"
;;
@@ -113,6 +113,7 @@ platform_check_image() {
whr-300hp2|\
whr-600d|\
whr-g300n|\
+ witi|\
wizfi630a|\
wl-330n|\
wl-330n3g|\
new file mode 100644
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "MQmaker WiTi";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ sdhci@10130000 {
+ status = "okay";
+ };
+
+ palmbus@1E000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gd25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+
+ i2c@900 {
+ compatible = "ralink,i2c-mt7621";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
+
+ pcie@1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+ };
+
+ ethernet@1e100000 {
+ mtd-mac-address = <&factory 0xe000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "witi:green:power";
+ gpios = <&gpio0 25 1>;
+ };
+
+ sys {
+ label = "witi:green:sys";
+ gpios = <&gpio0 24 1>;
+ };
+
+ internet {
+ label = "witi:green:internet";
+ gpios = <&gpio0 23 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+ };
+};
@@ -954,7 +954,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 witi wf-2881 zbt-wg2626
endif
define Device/mt7621
@@ -1004,6 +1004,11 @@ define Device/sap-g3200u3
DTS := SAP-G3200U3
endef
+define Device/witi
+ DTS := WITI
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
define Device/zbt-wg2626
DTS := ZBT-WG2626
IMAGE_SIZE := $(ralink_default_fw_size_16M)
new file mode 100644
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/witi
+ NAME:=MQmaker WiTi
+ FEATURES+=rtc
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \
+ kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+ kmod-rtc-pcf8563
+endef
+
+define Profile/witi/Description
+ Package set compatible with MQmaker WiTi board.
+endef
+$(eval $(call Profile,witi))
The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 4th submission that fixes the naming scheme for Mqmaker WiTi board. Patch v1 added initial support for MQmaker WiTi board. The device tree is based on PBR-M1. Patch v2 changed the flash chip ID (w25q256 to gd25q128). Patch v3 fixed the left-out entry for WiTi in 02_network. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> --- .../patches-3.18/999-add_gd25q128_support.patch | 13 ++ .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/WITI.dts | 142 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 7 +- target/linux/ramips/mt7621/profiles/mqmaker.mk | 20 +++ 8 files changed, 187 insertions(+), 1 deletion(-) create mode 100644 target/linux/generic/patches-3.18/999-add_gd25q128_support.patch create mode 100644 target/linux/ramips/dts/WITI.dts create mode 100644 target/linux/ramips/mt7621/profiles/mqmaker.mk