Message ID | 1444422589-5260-4-git-send-email-noltari@gmail.com |
---|---|
State | Accepted |
Delegated to: | Jonas Gorski |
Headers | show |
On 09/10/15 13:29, Álvaro Fernández Rojas wrote: > Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> That is a first step, but there are additional kernel changes required to boot on 3380, are you also going to submit these? > --- > target/linux/brcm63xx/image/lzma-loader/src/board.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/target/linux/brcm63xx/image/lzma-loader/src/board.c b/target/linux/brcm63xx/image/lzma-loader/src/board.c > index 46af525..28b9c53 100644 > --- a/target/linux/brcm63xx/image/lzma-loader/src/board.c > +++ b/target/linux/brcm63xx/image/lzma-loader/src/board.c > @@ -70,6 +70,8 @@ void board_init(void) > case PRID_IMP_BMIPS43XX: > if ((prid & 0xff) == 0x04) > chipid_reg = 0xfff8c000; > + else if ((prid & 0xff) == 0x70) > + chipid_reg = 0xb4e00000; > else if ((prid & 0xff) >= 0x30) > chipid_reg = 0xb0000000; > else > @@ -95,6 +97,9 @@ void board_init(void) > case 0x6326: > uart_base = chipid_reg + 0x180; > break; > + case 0x3380: > + uart_base = chipid_reg + 0x200; > + break; > case 0x6338: > case 0x6345: > case 0x6348: >
Not yet, also my patches for the kernel are based on yours, so maybe you should submit them, since you were the first one to implement the support. BTW, I boot tested bmips on BCM3380 with the following changes: https://github.com/openwrt-es/openwrt/commit/3c72e4dc2b2bf21f3b1a7ef412fdb60753febae1 https://github.com/openwrt-es/openwrt/commits/bmips-4.1 But I have to say it's painfully slow, because it takes like 150s to fully boot on 1 CPU and 400+ on 2CPU :/. And about bmips target, Jonas wants to add it as a brcm63xx subtarget in the future. Regards, Álvaro. El 09/10/2015 a las 22:38, Florian Fainelli escribió: > On 09/10/15 13:29, Álvaro Fernández Rojas wrote: >> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> > That is a first step, but there are additional kernel changes required > to boot on 3380, are you also going to submit these? > >> --- >> target/linux/brcm63xx/image/lzma-loader/src/board.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/target/linux/brcm63xx/image/lzma-loader/src/board.c b/target/linux/brcm63xx/image/lzma-loader/src/board.c >> index 46af525..28b9c53 100644 >> --- a/target/linux/brcm63xx/image/lzma-loader/src/board.c >> +++ b/target/linux/brcm63xx/image/lzma-loader/src/board.c >> @@ -70,6 +70,8 @@ void board_init(void) >> case PRID_IMP_BMIPS43XX: >> if ((prid & 0xff) == 0x04) >> chipid_reg = 0xfff8c000; >> + else if ((prid & 0xff) == 0x70) >> + chipid_reg = 0xb4e00000; >> else if ((prid & 0xff) >= 0x30) >> chipid_reg = 0xb0000000; >> else >> @@ -95,6 +97,9 @@ void board_init(void) >> case 0x6326: >> uart_base = chipid_reg + 0x180; >> break; >> + case 0x3380: >> + uart_base = chipid_reg + 0x200; >> + break; >> case 0x6338: >> case 0x6345: >> case 0x6348: >>
2015-10-09 22:52 GMT+02:00, Álvaro Fernández Rojas <noltari@gmail.com>: > Not yet, also my patches for the kernel are based on yours, so maybe you > should submit them, since you were the first one to implement the support. > BTW, I boot tested bmips on BCM3380 with the following changes: > https://github.com/openwrt-es/openwrt/commit/3c72e4dc2b2bf21f3b1a7ef412fdb60753febae1 > https://github.com/openwrt-es/openwrt/commits/bmips-4.1 > But I have to say it's painfully slow, because it takes like 150s to > fully boot on 1 CPU and 400+ on 2CPU :/. > > And about bmips target, Jonas wants to add it as a brcm63xx subtarget in > the future. > > Regards, > Álvaro. > According to the CG3100 source code the BCM3380 uses only spi flash and does not have hsspi but legacy spi like 6368, 6358 and others, but with a max speed of 25MHz, which is not defined in . This is a piece of code found in spiflash.c: #if defined(CONFIG_BCM93380) spi_flash_busnum = LEG_SPI_BUS_NUM; spi_flash_clock = 25000000; #endif #if defined(CONFIG_BCM93383) spi_flash_busnum = HS_SPI_BUS_NUM; #endif IMHO bcm63xx patches #345 and #411 are related with the slow boot speed you are experiencing. I have no idea if BCM3380 supports other spi clocks. Regards: Pepe
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/board.c b/target/linux/brcm63xx/image/lzma-loader/src/board.c index 46af525..28b9c53 100644 --- a/target/linux/brcm63xx/image/lzma-loader/src/board.c +++ b/target/linux/brcm63xx/image/lzma-loader/src/board.c @@ -70,6 +70,8 @@ void board_init(void) case PRID_IMP_BMIPS43XX: if ((prid & 0xff) == 0x04) chipid_reg = 0xfff8c000; + else if ((prid & 0xff) == 0x70) + chipid_reg = 0xb4e00000; else if ((prid & 0xff) >= 0x30) chipid_reg = 0xb0000000; else @@ -95,6 +97,9 @@ void board_init(void) case 0x6326: uart_base = chipid_reg + 0x180; break; + case 0x3380: + uart_base = chipid_reg + 0x200; + break; case 0x6338: case 0x6345: case 0x6348:
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- target/linux/brcm63xx/image/lzma-loader/src/board.c | 5 +++++ 1 file changed, 5 insertions(+)