Message ID | 1442097192-11935-1-git-send-email-lists@sumpfralle.de |
---|---|
State | Accepted |
Headers | show |
you used the wrong prefix, i fixed it manually, please double check it next time John On 13/09/2015 00:33, Lars Kruse wrote: > The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the > following: > * Ubiquiti Nanostation M XM: Pin 8 > * Ubiquiti Nanostation M XW: Pin 2 > > The previous definition of the pins was mixed up between XM and XW model. > > Signed-off-by: Lars Kruse <lists@sumpfralle.de> > --- > target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches > index 81d3982..b41f275 100644 > --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches > +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches > @@ -10,10 +10,10 @@ board=$(ar71xx_board_name) > > case "$board" in > nanostation-m) > - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2" > + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8" > ;; > nanostation-m-xw) > - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8" > + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2" > ;; > cpe510) > ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "20" >
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches index 81d3982..b41f275 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches @@ -10,10 +10,10 @@ board=$(ar71xx_board_name) case "$board" in nanostation-m) - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2" + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8" ;; nanostation-m-xw) - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8" + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2" ;; cpe510) ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the following: * Ubiquiti Nanostation M XM: Pin 8 * Ubiquiti Nanostation M XW: Pin 2 The previous definition of the pins was mixed up between XM and XW model. Signed-off-by: Lars Kruse <lists@sumpfralle.de> --- target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)