Message ID | 1441081287-3100-4-git-send-email-miaoqing@qca.qualcomm.com |
---|---|
State | Superseded |
Headers | show |
On 09/01/2015 06:21 AM, miaoqing@qti.qualcomm.com wrote: > From: Miaoqing Pan <miaoqing@codeaurora.org> > > This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/ > 2015-August/034979.html. As the peak detect calibration is set > incorrectly. > > Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Tested-by: Matthias Schiffer <mschiffer@universe-factory.net> Thanks a lot :) > --- > ...6-ath9k_enable_hw_manual_peak_calibration.patch | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch > > diff --git a/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch > new file mode 100644 > index 0000000..8606493 > --- /dev/null > +++ b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch > @@ -0,0 +1,22 @@ > +--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c > ++++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c > +@@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) > + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), > + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0); > + > +- if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) { > ++ if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) || > ++ AR_SREV_9561(ah)) { > + if (is_2g) > + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), > + AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, > +@@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, > + > + skip_tx_iqcal: > + if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { > +- if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) { > ++ if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) || > ++ AR_SREV_9561(ah)) { > + for (i = 0; i < AR9300_MAX_CHAINS; i++) { > + if (!(ah->rxchainmask & (1 << i))) > + continue; >
diff --git a/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch new file mode 100644 index 0000000..8606493 --- /dev/null +++ b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch @@ -0,0 +1,22 @@ +--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c ++++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c +@@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0); + +- if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) { ++ if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) || ++ AR_SREV_9561(ah)) { + if (is_2g) + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), + AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, +@@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, + + skip_tx_iqcal: + if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { +- if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) { ++ if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) || ++ AR_SREV_9561(ah)) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue;