Message ID | 1440155859-910-11-git-send-email-jogo@openwrt.org |
---|---|
State | RFC |
Headers | show |
On 21/08/2015 13:17, Jonas Gorski wrote: > The stock QSDK expects the ubi to be wrapped in an itb image, so > provide one for easy sysupgrade from QSDK. > > FIXME: currently does not work? Seems to flash fine, but ubi cannot > be mounted by OpenWrt and needs to be flashed a second time. how do you flash it the second time ? using the same process ? > > Signed-off-by: Jonas Gorski <jogo@openwrt.org> > --- > target/linux/ipq806x/image/Makefile | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile > index ac0fc84..2fdaab5 100644 > --- a/target/linux/ipq806x/image/Makefile > +++ b/target/linux/ipq806x/image/Makefile > @@ -53,8 +53,8 @@ endef > > define Device/UbiFit > KERNEL_IN_UBI := 1 > - IMAGES := nand-factory.ubi nand-sysupgrade.tar > - IMAGE/nand-factory.ubi := append-ubi > + IMAGES := nand-factory.itb nand-sysupgrade.tar > + IMAGE/nand-factory.itb := append-ubi | ubi-fit > IMAGE/nand-sysupgrade.tar := sysupgrade-nand > endef > >
On 21.08.2015 13:24, John Crispin wrote: > > > On 21/08/2015 13:17, Jonas Gorski wrote: >> The stock QSDK expects the ubi to be wrapped in an itb image, so >> provide one for easy sysupgrade from QSDK. >> >> FIXME: currently does not work? Seems to flash fine, but ubi cannot >> be mounted by OpenWrt and needs to be flashed a second time. > > how do you flash it the second time ? using the same process ? Booted a ramdisk OpenWrt kernel, then flashed the ubi with ubiformat. Which didn't seem to differ from what the preinstalled QSDK did, but somehow works. Jonas
On 21/08/2015 13:28, Jonas Gorski wrote: > On 21.08.2015 13:24, John Crispin wrote: >> >> >> On 21/08/2015 13:17, Jonas Gorski wrote: >>> The stock QSDK expects the ubi to be wrapped in an itb image, so >>> provide one for easy sysupgrade from QSDK. >>> >>> FIXME: currently does not work? Seems to flash fine, but ubi cannot >>> be mounted by OpenWrt and needs to be flashed a second time. >> >> how do you flash it the second time ? using the same process ? > > Booted a ramdisk OpenWrt kernel, then flashed the ubi with ubiformat. Which didn't seem to differ from what the preinstalled QSDK did, but somehow works. > > Jonas > does sysupgrade work from owrt->owrt ?
On 21.08.2015 13:39, John Crispin wrote: > > > On 21/08/2015 13:28, Jonas Gorski wrote: >> On 21.08.2015 13:24, John Crispin wrote: >>> >>> >>> On 21/08/2015 13:17, Jonas Gorski wrote: >>>> The stock QSDK expects the ubi to be wrapped in an itb image, so >>>> provide one for easy sysupgrade from QSDK. >>>> >>>> FIXME: currently does not work? Seems to flash fine, but ubi cannot >>>> be mounted by OpenWrt and needs to be flashed a second time. >>> >>> how do you flash it the second time ? using the same process ? >> >> Booted a ramdisk OpenWrt kernel, then flashed the ubi with ubiformat. Which didn't seem to differ from what the preinstalled QSDK did, but somehow works. >> >> Jonas >> > > does sysupgrade work from owrt->owrt ? Yes, even without the last two patches. The last two are only for "easy" sysupgrade from QSDK (in theory). Therefore also as RFC. Jonas
On 8/21/15, 6:43 AM, "openwrt-devel on behalf of Jonas Gorski" <openwrt-devel-bounces@lists.openwrt.org on behalf of jogo@openwrt.org> wrote: > On 21.08.2015 13:39, John Crispin wrote: >> >> >> On 21/08/2015 13:28, Jonas Gorski wrote: >>> On 21.08.2015 13:24, John Crispin wrote: >>>> >>>> >>>> On 21/08/2015 13:17, Jonas Gorski wrote: >>>>> The stock QSDK expects the ubi to be wrapped in an itb image, so >>>>> provide one for easy sysupgrade from QSDK. >>>>> >>>>> FIXME: currently does not work? Seems to flash fine, but ubi cannot >>>>> be mounted by OpenWrt and needs to be flashed a second time. >>>> >>>> how do you flash it the second time ? using the same process ? >>> >>> Booted a ramdisk OpenWrt kernel, then flashed the ubi with ubiformat. Which didn't seem to differ from what the preinstalled QSDK did, but somehow works. >>> >>> Jonas >>> >> >> does sysupgrade work from owrt->owrt ? > > Yes, even without the last two patches. The last two are only for "easy" sysupgrade from QSDK (in theory). Therefore also as RFC. The following patch is somehow causing the issue: target/linux/generic/patches-3.18/494-mtd-ubi-add-EOF-marker-support.patch Still investigating further. [ 3.295677] UBI: auto-attach mtd11 [ 3.295698] UBI: attaching mtd11 to ubi0 [ 3.334563] UBI: EOF marker found, PEBs from 29 will be erased [ 3.334725] UBI: scanning is finished [ 3.339293] UBI error: ubi_read_volume_table: the layout volume was not found [ 3.343386] UBI error: ubi_attach_mtd_dev: failed to attach mtd11, error -22 [ 3.350150] UBI error: ubi_auto_attach: cannot attach mtd11 But with the above patch removed the board will boot when flashed from u-boot. -M
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index ac0fc84..2fdaab5 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -53,8 +53,8 @@ endef define Device/UbiFit KERNEL_IN_UBI := 1 - IMAGES := nand-factory.ubi nand-sysupgrade.tar - IMAGE/nand-factory.ubi := append-ubi + IMAGES := nand-factory.itb nand-sysupgrade.tar + IMAGE/nand-factory.itb := append-ubi | ubi-fit IMAGE/nand-sysupgrade.tar := sysupgrade-nand endef
The stock QSDK expects the ubi to be wrapped in an itb image, so provide one for easy sysupgrade from QSDK. FIXME: currently does not work? Seems to flash fine, but ubi cannot be mounted by OpenWrt and needs to be flashed a second time. Signed-off-by: Jonas Gorski <jogo@openwrt.org> --- target/linux/ipq806x/image/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)