new file mode 100644
@@ -0,0 +1,20 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d
+
+ /* We must finish initialization here */
+
++#ifdef CONFIG_X86_RDC321X
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
++
++ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
++ config_writel(socket, 35*4, 0x00000022);
++ config_writel(socket, 36*4, 0x60200000);
++ config_writel(socket, 40*4, 0x7e020000);
++#endif
++
+ if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
+ /* No IRQ or request_irq failed. Poll */
+ socket->cb_irq = 0; /* But zero is a valid IRQ number. */
new file mode 100644
@@ -0,0 +1,11 @@
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -480,6 +480,8 @@ config X86_RDC321X
+ depends on X86_EXTENDED_PLATFORM
+ select M486
+ select X86_REBOOTFIXUPS
++ select EMBEDDED
++ select ARCH_REQUIRE_GPIOLIB
+ ---help---
+ This option is needed for RDC R-321x system-on-chip, also known
+ as R-8610-(G).
new file mode 100644
@@ -0,0 +1,176 @@
+--- /dev/null
++++ b/Documentation/x86/rdc.txt
+@@ -0,0 +1,69 @@
++
++Introduction
++============
++
++RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
++(system-on-chips) for a number of years. They are not the fastest of
++CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
++coupled with very low power consumption[1] and low cost make them ideal
++for embedded applications.
++
++
++Where to find
++=============
++
++RDC chips show up in numerous embedded devices, but be careful since
++many of them will not run Linux 2.6 without significant expertise.
++
++There are several variants of what the linux kernel refers to generically
++as RDC321X: R8610, R321x, S3282 and AMRISC20000.
++
++R321x: Found in various routers, see the OpenWrt project for details,
++ http://wiki.openwrt.org/oldwiki/rdcport
++
++R8610: Found on the RDC evaluation board
++ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
++
++AMRISC20000: Found in the MGB-100 wireless hard disk
++ http://tintuc.no-ip.com/linux/tipps/mgb100/
++
++S3282: Found in various NAS devices, including the Bifferboard
++ http://www.bifferos.com
++
++
++Kernel Configuration
++====================
++
++Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths
++emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
++(CONFIG_X86_MCE not selected).
++
++
++CPU detection
++=============
++
++None of these chips support the cpuid instruction, so as with some
++other x86 compatible SoCs, we must check the north bridge and look
++for specific 'signature' PCI device config.
++
++The current detection code has been tested only on the Bifferboard
++(S3282 CPU), please send bug reports or success stories with
++other devices to bifferos@yahoo.co.uk.
++
++
++Credits
++=======
++
++Many thanks to RDC for providing the customer codes to allow
++detection of all known variants, without which this detection code
++would have been very hard to ascertain.
++
++
++References
++==========
++
++[1] S3282 in certain NAS solutions consumes less than 1W
++
++
++mark@bifferos.com 2009
++
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -478,6 +478,7 @@ config X86_RDC321X
+ bool "RDC R-321x SoC"
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
++ select PCI
+ select M486
+ select X86_REBOOTFIXUPS
+ select EMBEDDED
+--- a/arch/x86/include/asm/processor.h
++++ b/arch/x86/include/asm/processor.h
+@@ -137,7 +137,8 @@ struct cpuinfo_x86 {
+ #define X86_VENDOR_CENTAUR 5
+ #define X86_VENDOR_TRANSMETA 7
+ #define X86_VENDOR_NSC 8
+-#define X86_VENDOR_NUM 9
++#define X86_VENDOR_RDC 9
++#define X86_VENDOR_NUM 10
+
+ #define X86_VENDOR_UNKNOWN 0xff
+
+--- a/arch/x86/kernel/cpu/Makefile
++++ b/arch/x86/kernel/cpu/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix
+ obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
+ obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
+ obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
++obj-$(CONFIG_X86_RDC321X) += rdc.o
+
+ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+
+--- /dev/null
++++ b/arch/x86/kernel/cpu/rdc.c
+@@ -0,0 +1,69 @@
++/*
++ * See Documentation/x86/rdc.txt
++ *
++ * mark@bifferos.com
++ */
++
++#include <linux/pci.h>
++#include <asm/pci-direct.h>
++#include "cpu.h"
++
++
++static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
++{
++ u16 vendor, device;
++ u32 customer_id;
++
++ if (!early_pci_allowed())
++ return;
++
++ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */
++ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
++ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
++
++ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
++ return; /* not RDC */
++ /*
++ * NB: We could go on and check other devices, e.g. r6040 NIC, but
++ * that's probably overkill
++ */
++
++ customer_id = read_pci_config(0, 0, 0, 0x90);
++
++ switch (customer_id) {
++ /* id names are from RDC */
++ case 0x00321000:
++ strcpy(c->x86_model_id, "R3210/R3211");
++ break;
++ case 0x00321001:
++ strcpy(c->x86_model_id, "AMITRISC20000/20010");
++ break;
++ case 0x00321002:
++ strcpy(c->x86_model_id, "R3210X/Edimax");
++ break;
++ case 0x00321003:
++ strcpy(c->x86_model_id, "R3210/Kcodes");
++ break;
++ case 0x00321004: /* tested */
++ strcpy(c->x86_model_id, "S3282/CodeTek");
++ break;
++ case 0x00321007:
++ strcpy(c->x86_model_id, "R8610");
++ break;
++ default:
++ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
++ break;
++ }
++
++ strcpy(c->x86_vendor_id, "RDC");
++ c->x86_vendor = X86_VENDOR_RDC;
++}
++
++static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
++ .c_vendor = "RDC",
++ .c_ident = { "RDC" },
++ .c_identify = rdc_identify,
++ .c_x86_vendor = X86_VENDOR_RDC,
++};
++
++cpu_dev_register(rdc_cpu_dev);
new file mode 100644
@@ -0,0 +1,22 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -304,7 +304,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+
+ quiet_cmd_lzma = LZMA $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+- lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++ lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+ quiet_cmd_lzo = LZO $@
+--- a/arch/x86/include/asm/boot.h
++++ b/arch/x86/include/asm/boot.h
+@@ -23,7 +23,7 @@
+ #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+ #endif
+
+-#ifdef CONFIG_KERNEL_BZIP2
++#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
+ #define BOOT_HEAP_SIZE 0x400000
+ #else /* !CONFIG_KERNEL_BZIP2 */
+
new file mode 100644
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/mtdblock.c
++++ b/drivers/mtd/mtdblock.c
+@@ -63,7 +63,7 @@ static void erase_callback(struct erase_
+ wake_up(wait_q);
+ }
+
+-static int erase_write (struct mtd_info *mtd, unsigned long pos,
++int erase_write (struct mtd_info *mtd, unsigned long pos,
+ int len, const char *buf)
+ {
+ struct erase_info erase;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -414,6 +414,9 @@ extern void register_mtd_user (struct mt
+ extern int unregister_mtd_user (struct mtd_notifier *old);
+ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+
++int erase_write (struct mtd_info *mtd, unsigned long pos,
++ int len, const char *buf);
++
+ void mtd_erase_callback(struct erase_info *instr);
+
+ static inline int mtd_is_bitflip(int err) {
new file mode 100644
@@ -0,0 +1,745 @@
+--- a/arch/x86/Makefile
++++ b/arch/x86/Makefile
+@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/
+ # See arch/x86/Kbuild for content of core part of the kernel
+ core-y += arch/x86/
+
++# RDC R-321X support
++core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
++
+ # drivers-y are linked after core-y
+ drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+ drivers-$(CONFIG_PCI) += arch/x86/pci/
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for the RDC321x specific parts of the kernel
++#
++obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
++
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/platform.c
+@@ -0,0 +1,115 @@
++/*
++ * Generic RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/physmap.h>
++#include <linux/root_dev.h>
++
++#include <asm/rdc_boards.h>
++
++static struct rdc_platform_data rdcplat_data;
++
++/* LEDS */
++static struct platform_device rdc321x_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &rdcplat_data.led_data,
++ }
++};
++
++/* Button */
++static struct platform_device rdc321x_buttons = {
++ .name = "gpio-keys-polled",
++ .id = -1,
++ .dev = {
++ .platform_data = &rdcplat_data.button_data,
++ }
++};
++
++static __initdata struct platform_device *rdc321x_devs[] = {
++ &rdc321x_leds,
++ &rdc321x_buttons,
++};
++
++const char *__initdata boards[] = {
++ "Sitecom",
++ "AR525W",
++ "Bifferboard",
++ "R8610",
++ 0
++};
++
++static struct map_info rdc_map_info = {
++ .name = "rdc_flash",
++ .size = 0x800000, /* 8MB */
++ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */
++ .bankwidth = 2,
++};
++
++static int __init rdc_board_setup(void)
++{
++ struct mtd_info *mtdinfo;
++ struct mtd_part_parser_data *ppdata;
++ int res;
++
++ simple_map_init(&rdc_map_info);
++
++ while (1) {
++ rdc_map_info.virt = ioremap(rdc_map_info.phys,
++ rdc_map_info.size);
++ if (rdc_map_info.virt == NULL)
++ continue;
++
++ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
++ if (mtdinfo == NULL)
++ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
++ if (mtdinfo != NULL)
++ break;
++
++ iounmap(rdc_map_info.virt);
++ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */
++ panic("RDC321x: Could not find start of flash!");
++ rdc_map_info.phys = (u32) -rdc_map_info.size;
++ }
++
++ /*
++ * TODO: add a new field to mtd_part_parser_data, and use that
++ * instead of this ugly casting
++ */
++ ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
++ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
++ if (res) {
++ panic("RDC321x: can't identify board type");
++ return -ENOSYS;
++ }
++
++ ROOT_DEV = 0;
++
++ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
++}
++late_initcall(rdc_board_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/ar525w.c
+@@ -0,0 +1,251 @@
++/*
++ * ar525w RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/vmalloc.h>
++#include <linux/mtd/mtd.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++ char magic[4]; /* ASICII: GMTK */
++ u32 checksum; /* CRC32 */
++ u32 version; /* x.x.x.x */
++ u32 kernelsz; /* The size of the kernel image */
++ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */
++ u32 pid; /* Product ID */
++ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */
++ u32 reserved;
++};
++
++static struct gpio_led ar525w_leds[] = {
++ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
++};
++static struct gpio_keys_button ar525w_btns[] = {
++ {
++ .gpio = 6,
++ .code = BTN_0,
++ .desc = "Reset",
++ .active_low = 1,
++ }
++};
++
++static u32 __initdata crctab[257] = {
++ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
++ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
++ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
++ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
++ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
++ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
++ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
++ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
++ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
++ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
++ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
++ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
++ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
++ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
++ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
++ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
++ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
++ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
++ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
++ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
++ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
++ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
++ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
++ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
++ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
++ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
++ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
++ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
++ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
++ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
++ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
++ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
++ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
++ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
++ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
++ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
++ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
++ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
++ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
++ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
++ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
++ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
++ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
++ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
++ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
++ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
++ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
++ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
++ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
++ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
++ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
++ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
++ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
++ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
++ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
++ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
++ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
++ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
++ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
++ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
++ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
++ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
++ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
++ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
++ 0
++};
++
++static u32 __init crc32(u8 * buf, u32 len)
++{
++ register int i;
++ u32 sum;
++ register u32 s0;
++ s0 = ~0;
++ for (i = 0; i < len; i++) {
++ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
++ }
++ sum = ~s0;
++ return sum;
++}
++
++static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
++{
++ char *buffer;
++ int res;
++ u32 bufferlength = header->kernelsz + sizeof(struct image_header);
++ u32 len;
++ static char crcbuf[0x400];
++
++ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
++ header->imagesz, bufferlength);
++
++ buffer = vmalloc(bufferlength);
++ if (!buffer) {
++ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
++ return -ENOMEM;
++ }
++
++ res = mtd_read(master, 0x0, bufferlength, &len, buffer);
++ if (res || len != bufferlength)
++ goto out;
++
++ header = (struct image_header *) buffer;
++ header->imagesz = bufferlength;
++ header->checksum = 0;
++ header->fastcksum = 0;
++
++ memcpy(crcbuf, buffer, 0x100);
++ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
++ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
++
++ header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
++ header->checksum = crc32(buffer, bufferlength);
++
++ res = mtd_unlock(master, 0, master->erasesize);
++ if (res != 0 && res != -EOPNOTSUPP) {
++ printk(KERN_ERR "Can't unlock image header\n");
++ goto out;
++ }
++
++ res = erase_write (master, 0, master->erasesize, buffer);
++ if (res)
++ printk(KERN_ERR "Can't rewrite image header\n");
++
++out:
++ vfree(buffer);
++ return res;
++}
++
++static int __init
++parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct image_header header;
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++ if (master->size != 0x400000) //4MB
++ return -ENOSYS;
++
++ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header);
++ if (res)
++ return res;
++
++ if (strncmp(header.magic, "GMTK", 4))
++ return -ENOSYS;
++
++ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
++ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
++ return -EINVAL;
++ }
++
++ if (header.kernelsz + sizeof(header) != header.imagesz) {
++ res = fixup_ar525w_header(master, &header);
++ if (res)
++ return res;
++ }
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++ rdc_flash_parts[0].name = "firmware";
++ rdc_flash_parts[0].offset = 0x0;
++ rdc_flash_parts[0].size = 0x3E0000;
++ rdc_flash_parts[1].name = "rootfs";
++ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
++ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
++ rdc_flash_parts[2].name = "bootloader";
++ rdc_flash_parts[2].offset = 0x3E0000;
++ rdc_flash_parts[2].size = 0x20000;
++
++ *pparts = rdc_flash_parts;
++
++ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
++ pdata->led_data.leds = ar525w_leds;
++ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
++ pdata->button_data.buttons = ar525w_btns;
++
++ return 3;
++}
++
++static struct mtd_part_parser __initdata ar525w_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_ar525w_partitions,
++ .name = "AR525W",
++};
++
++static int __init ar525w_setup(void)
++{
++ return register_mtd_parser(&ar525w_parser);
++}
++
++arch_initcall(ar525w_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
+@@ -0,0 +1,74 @@
++/*
++ * Bifferboard RDC321x platform devices
++ *
++ * Copyright (C) 2010 bifferos@yahoo.co.uk
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_bifferboard_partitions(struct mtd_info *master,
++ struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ u32 kernel_len;
++ u16 tmp;
++
++ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
++ if (res)
++ return res;
++ kernel_len = tmp * master->erasesize;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++ *pparts = rdc_flash_parts;
++
++ rdc_flash_parts[0].name = "kernel";
++ rdc_flash_parts[0].offset = 0;
++ rdc_flash_parts[0].size = kernel_len;
++ rdc_flash_parts[1].name = "rootfs";
++ rdc_flash_parts[1].offset = kernel_len;
++ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
++ rdc_flash_parts[2].name = "biffboot";
++ rdc_flash_parts[2].offset = master->size - 0x10000;
++ rdc_flash_parts[2].size = 0x10000;
++
++ return 3;
++}
++
++struct mtd_part_parser __initdata bifferboard_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_bifferboard_partitions,
++ .name = "Bifferboard",
++};
++
++static int __init bifferboard_setup(void)
++{
++ return register_mtd_parser(&bifferboard_parser);
++}
++arch_initcall(bifferboard_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/r8610.c
+@@ -0,0 +1,69 @@
++/*
++ * R8610 RDC321x platform devices
++ *
++ * Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct mtd_partition *rdc_flash_parts;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
++
++ *pparts = rdc_flash_parts;
++
++ rdc_flash_parts[0].name = "kernel";
++ rdc_flash_parts[0].size = 0x001f0000;
++ rdc_flash_parts[0].offset = 0;
++ rdc_flash_parts[1].name = "config";
++ rdc_flash_parts[1].size = 0x10000;
++ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[2].name = "rootfs";
++ rdc_flash_parts[2].size = 0x1E0000;
++ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[3].name = "redboot";
++ rdc_flash_parts[3].size = 0x20000;
++ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
++
++ return 4;
++}
++
++struct mtd_part_parser __initdata r8610_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_r8610_partitions,
++ .name = "R8610",
++};
++
++static int __init r8610_setup(void)
++{
++ return register_mtd_parser(&r8610_parser);
++}
++
++arch_initcall(r8610_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/sitecom.c
+@@ -0,0 +1,115 @@
++/*
++ * Sitecom RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++ char magic[4];
++ u32 kernel_length;
++ u32 ramdisk_length;
++ char magic2[4];
++ u32 kernel_length2;
++};
++
++static struct gpio_led sitecom_leds[] = {
++ { .name = "rdc321x:power", .gpio = 15, .active_low = 1},
++ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
++ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
++};
++
++static struct gpio_keys_button sitecom_btns[] = {
++ {
++ .gpio = 6,
++ .code = BTN_0,
++ .desc = "Reset",
++ .active_low = 1,
++ }
++};
++
++static int __init
++parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct image_header header;
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++ if (master->size != 0x400000) /* 4MB */
++ return -ENOSYS;
++
++ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header);
++ if (res)
++ return res;
++
++ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
++ return -ENOSYS;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
++
++ rdc_flash_parts[0].name = "firmware";
++ rdc_flash_parts[0].offset = 0x8000;
++ rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
++ rdc_flash_parts[1].name = "config";
++ rdc_flash_parts[1].offset = 0;
++ rdc_flash_parts[1].size = 0x8000;
++ rdc_flash_parts[2].name = "kernel";
++ rdc_flash_parts[2].offset = 0x8014;
++ rdc_flash_parts[2].size = header.kernel_length;
++ rdc_flash_parts[3].name = "rootfs";
++ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
++ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
++ rdc_flash_parts[4].name = "bootloader";
++ rdc_flash_parts[4].offset = 0x3F0000;
++ rdc_flash_parts[4].size = 0x10000;
++
++ *pparts = rdc_flash_parts;
++
++ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
++ pdata->led_data.leds = sitecom_leds;
++ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
++ pdata->button_data.buttons = sitecom_btns;
++
++ return 5;
++}
++
++struct mtd_part_parser __initdata sitecom_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_sitecom_partitions,
++ .name = "Sitecom",
++};
++
++static int __init sitecom_setup(void)
++{
++ return register_mtd_parser(&sitecom_parser);
++}
++
++arch_initcall(sitecom_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/reboot.c
+@@ -0,0 +1,44 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++static void rdc321x_reset(void)
++{
++ unsigned i;
++
++ /* write to southbridge config register 0x41
++ enable pci reset on cpu reset, make internal port 0x92 writeable
++ and switch port 0x92 to internal */
++ outl(0x80003840, 0xCF8);
++ i = inl(0xCFC);
++ i |= 0x1600;
++ outl(i, 0xCFC);
++
++ /* soft reset */
++ outb(1, 0x92);
++}
++
++static int __init rdc_setup_reset(void)
++{
++ machine_ops.emergency_restart = rdc321x_reset;
++ return 0;
++}
++
++arch_initcall(rdc_setup_reset);
+--- /dev/null
++++ b/arch/x86/include/asm/rdc_boards.h
+@@ -0,0 +1,36 @@
++/*
++ * RDC321x boards
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#ifndef _RDC_BOARDS_H__
++#define _RDC_BOARDS_H__
++
++#include <linux/leds.h>
++#include <linux/gpio_keys.h>
++
++struct rdc_platform_data {
++ struct gpio_led_platform_data led_data;
++ struct gpio_keys_platform_data button_data;
++};
++
++#endif
new file mode 100644
@@ -0,0 +1,11 @@
+--- a/drivers/mfd/rdc321x-southbridge.c
++++ b/drivers/mfd/rdc321x-southbridge.c
+@@ -86,6 +86,8 @@ static int rdc321x_sb_probe(struct pci_d
+ rdc321x_gpio_pdata.sb_pdev = pdev;
+ rdc321x_wdt_pdata.sb_pdev = pdev;
+
++ panic_on_unrecovered_nmi = 1;
++
+ return mfd_add_devices(&pdev->dev, -1,
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
+ NULL, 0, NULL);
new file mode 100644
@@ -0,0 +1,13 @@
+--- a/include/linux/timex.h
++++ b/include/linux/timex.h
+@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti
+ void ntp_notify_cmos_timer(void);
+
+ /* The clock frequency of the i8253/i8254 PIT */
++#ifdef CONFIG_X86_RDC321X
++#define PIT_TICK_RATE 1041816ul
++#else
+ #define PIT_TICK_RATE 1193182ul
++#endif
+
+ #endif /* LINUX_TIMEX_H */
new file mode 100644
@@ -0,0 +1,43 @@
+From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
+From: root <root@cent.localnet>
+Date: Sun, 6 Dec 2009 18:26:43 +0000
+Subject: [PATCH 03/14] kexec fix
+
+---
+ arch/x86/kernel/relocate_kernel_32.S | 6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+--- a/arch/x86/kernel/relocate_kernel_32.S
++++ b/arch/x86/kernel/relocate_kernel_32.S
+@@ -54,8 +54,10 @@ relocate_kernel:
+ movl %eax, CR0(%edi)
+ movl %cr3, %eax
+ movl %eax, CR3(%edi)
++#ifndef CONFIG_X86_RDC321X
+ movl %cr4, %eax
+ movl %eax, CR4(%edi)
++#endif
+
+ /* read the arguments and say goodbye to the stack */
+ movl 20+4(%esp), %ebx /* page_list */
+@@ -124,7 +126,9 @@ identity_mapped:
+ * Setting everything to zero seems safe.
+ */
+ xorl %eax, %eax
++#ifndef CONFIG_X86_RDC321X
+ movl %eax, %cr4
++#endif
+
+ jmp 1f
+ 1:
+@@ -195,8 +199,10 @@ identity_mapped:
+ ret
+
+ virtual_mapped:
++#ifndef CONFIG_X86_RDC321X
+ movl CR4(%edi), %eax
+ movl %eax, %cr4
++#endif
+ movl CR3(%edi), %eax
+ movl %eax, %cr3
+ movl CR0(%edi), %eax
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> --- .../linux/x86/patches-3.18/006-yenta_mistery.patch | 20 + .../patches-3.18/009-rdc321x_select_embedded.patch | 11 + .../linux/x86/patches-3.18/010-rdc_cpu_ident.patch | 176 +++++ .../x86/patches-3.18/011-tune_lzma_options.patch | 22 + .../x86/patches-3.18/012-export_erase_write.patch | 23 + target/linux/x86/patches-3.18/100-rdc_boards.patch | 745 +++++++++++++++++++++ .../120-panic_on_unrecovered_nmi.patch | 11 + .../linux/x86/patches-3.18/150-pit-tick-rate.patch | 13 + target/linux/x86/patches-3.18/160-kexec-fix.patch | 43 ++ 9 files changed, 1064 insertions(+) create mode 100644 target/linux/x86/patches-3.18/006-yenta_mistery.patch create mode 100644 target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch create mode 100644 target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch create mode 100644 target/linux/x86/patches-3.18/011-tune_lzma_options.patch create mode 100644 target/linux/x86/patches-3.18/012-export_erase_write.patch create mode 100644 target/linux/x86/patches-3.18/100-rdc_boards.patch create mode 100644 target/linux/x86/patches-3.18/120-panic_on_unrecovered_nmi.patch create mode 100644 target/linux/x86/patches-3.18/150-pit-tick-rate.patch create mode 100644 target/linux/x86/patches-3.18/160-kexec-fix.patch