Message ID | 20210222085937.3195-1-rsalvaterra@gmail.com |
---|---|
Headers | show |
Series | mvebu: add support for Linux 5.10 | expand |
Hi. W dniu 22.02.2021 o 09:59, Rui Salvaterra pisze: > This series adds initial support for 5.10 on mvebu. Build/runtime-tested on a > Turris Omnia, no regressions noticed. > > NOTE: The 64-bit Cortex-A{53,72} targets are build-tested only, as I don't have > the hardware. > > v3: addressed Tomasz Nowak's review/comments. > > v2: generate the kconfig after patching, since patches can (and do) introduce > new kconfig symbols. > > Rui Salvaterra (8): > mvebu: add generic kconfig symbols > mvebu: refresh the 5.4 kernel configs > mvebu: copy 5.4 files/patches/kconfigs to 5.10 > mvebu: remove 5.10 upstreamed device trees With this patch fixed You can add my Reviewed-by > mvebu: refresh 5.10 kconfigs/patches > mvebu: fix the patch numbering > mvebu: fix the Turris Omnia device tree > mvebu: add 5.10 as a testing kernel Also for the whole series: Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> on ESPRESSObin v5. > > target/linux/generic/config-5.10 | 7 + > target/linux/mvebu/Makefile | 2 +- > target/linux/mvebu/config-5.10 | 435 ++++++++++ > target/linux/mvebu/config-5.4 | 74 +- > target/linux/mvebu/cortexa53/config-5.10 | 87 ++ > target/linux/mvebu/cortexa53/config-5.4 | 122 +-- > target/linux/mvebu/cortexa72/config-5.10 | 94 +++ > target/linux/mvebu/cortexa72/config-5.4 | 111 +-- > .../marvell/armada-3720-espressobin-emmc.dts | 0 > .../marvell/armada-3720-espressobin-ultra.dts | 0 > .../armada-3720-espressobin-v7-emmc.dts | 0 > .../marvell/armada-3720-espressobin-v7.dts | 0 > ...s-mcbin-singleshot-add-heartbeat-LED.patch | 65 ++ > ...is-omnia-enable-HW-buffer-management.patch | 74 ++ > ...omnia-fix-hardware-buffer-management.patch | 27 + > ...ure-LED-2--INTn-pin-as-interrupt-pin.patch | 64 ++ > ...Mangle-bootloader-s-kernel-arguments.patch | 208 +++++ > ...-mvebu-armada-38x-enable-libata-leds.patch | 10 + > .../patches-5.10/302-add_powertables.patch | 770 ++++++++++++++++++ > ...3-linksys_hardcode_nand_ecc_settings.patch | 17 + > .../patches-5.10/304-revert_i2c_delay.patch | 15 + > .../305-armada-385-rd-mtd-partitions.patch | 19 + > .../306-ARM-mvebu-385-ap-Add-partitions.patch | 35 + > ...-armada-xp-linksys-mamba-broken-idle.patch | 10 + > .../308-armada-xp-linksys-mamba-wan.patch | 11 + > .../patches-5.10/309-linksys-status-led.patch | 50 ++ > .../310-linksys-use-eth0-as-cpu-port.patch | 25 + > .../311-adjust-compatible-for-linksys.patch | 68 ++ > ...da388-clearfog-emmc-on-clearfog-base.patch | 87 ++ > .../313-helios4-dts-status-led-alias.patch | 28 + > ...ts-marvell-armada37xx-Add-eth0-alias.patch | 20 + > ...witch-PHY-operation-mode-to-2500base.patch | 34 + > .../patches-5.10/400-find_active_root.patch | 60 ++ > .../700-mvneta-tx-queue-workaround.patch | 34 + > ...dicate-failure-to-enter-deeper-sleep.patch | 40 + > ...-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++ > 36 files changed, 2479 insertions(+), 284 deletions(-) > create mode 100644 target/linux/mvebu/config-5.10 > create mode 100644 target/linux/mvebu/cortexa53/config-5.10 > create mode 100644 target/linux/mvebu/cortexa72/config-5.10 > rename target/linux/mvebu/{files => files-5.4}/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts (100%) > rename target/linux/mvebu/{files => files-5.4}/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts (100%) > rename target/linux/mvebu/{files => files-5.4}/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts (100%) > rename target/linux/mvebu/{files => files-5.4}/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts (100%) > create mode 100644 target/linux/mvebu/patches-5.10/001-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch > create mode 100644 target/linux/mvebu/patches-5.10/002-ARM-dts-turris-omnia-enable-HW-buffer-management.patch > create mode 100644 target/linux/mvebu/patches-5.10/100-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch > create mode 100644 target/linux/mvebu/patches-5.10/101-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch > create mode 100644 target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch > create mode 100644 target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch > create mode 100644 target/linux/mvebu/patches-5.10/302-add_powertables.patch > create mode 100644 target/linux/mvebu/patches-5.10/303-linksys_hardcode_nand_ecc_settings.patch > create mode 100644 target/linux/mvebu/patches-5.10/304-revert_i2c_delay.patch > create mode 100644 target/linux/mvebu/patches-5.10/305-armada-385-rd-mtd-partitions.patch > create mode 100644 target/linux/mvebu/patches-5.10/306-ARM-mvebu-385-ap-Add-partitions.patch > create mode 100644 target/linux/mvebu/patches-5.10/307-armada-xp-linksys-mamba-broken-idle.patch > create mode 100644 target/linux/mvebu/patches-5.10/308-armada-xp-linksys-mamba-wan.patch > create mode 100644 target/linux/mvebu/patches-5.10/309-linksys-status-led.patch > create mode 100644 target/linux/mvebu/patches-5.10/310-linksys-use-eth0-as-cpu-port.patch > create mode 100644 target/linux/mvebu/patches-5.10/311-adjust-compatible-for-linksys.patch > create mode 100644 target/linux/mvebu/patches-5.10/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch > create mode 100644 target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch > create mode 100644 target/linux/mvebu/patches-5.10/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch > create mode 100644 target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch > create mode 100644 target/linux/mvebu/patches-5.10/400-find_active_root.patch > create mode 100644 target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch > create mode 100644 target/linux/mvebu/patches-5.10/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch > create mode 100644 target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch >