diff mbox series

[ovs-dev,v3,4/5] Userspace: Add system test with UDP tunneling of UDP traffic.

Message ID 20240215215946.403341-4-mkp@redhat.com
State Superseded
Headers show
Series [ovs-dev,v3,1/5] netdev-linux: Favour inner packet for multi-encapsulated TSO. | expand

Commit Message

Mike Pattrick Feb. 15, 2024, 9:59 p.m. UTC 
Previously a gap existed in the tunnel system tests where only ICMP and
TCP traffic was tested. However, the code paths using for UDP traffic is
different then either of those and should also be tested.

Some of the modified tests had previously checked for TCP with ncat but
didn't include an appropriate check for ncat support. That check was
added to these tests.

Signed-off-by: Mike Pattrick <mkp@redhat.com>
---
 tests/system-traffic.at | 118 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 111 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/tests/system-traffic.at b/tests/system-traffic.at
index e68fe7e18..ca54a0f73 100644
--- a/tests/system-traffic.at
+++ b/tests/system-traffic.at
@@ -292,6 +292,7 @@  OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
 AT_SETUP([datapath - ping over vxlan tunnel])
+AT_SKIP_IF([test $HAVE_NC = no])
 OVS_CHECK_VXLAN()
 
 OVS_TRAFFIC_VSWITCHD_START()
@@ -318,6 +319,10 @@  NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 172.31.1.100 | FORMAT_PING], [
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Start ncat listeners.
+OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > tcp_data], [nc.pid])
+NETNS_DAEMONIZE([at_ns0], [nc -l -u 10.1.1.1 4321 > udp_data], [nc2.pid])
+
 dnl Okay, now check the overlay with different packet sizes
 NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PING], [0], [dnl
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
@@ -329,15 +334,29 @@  NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PI
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Verify that ncat is ready.
+OVS_WAIT_UNTIL([netstat -ln | grep :1234])
+OVS_WAIT_UNTIL([NS_EXEC([at_ns0], [netstat -ln | grep :4321])])
+
 dnl Check large bidirectional TCP.
 AT_CHECK([dd if=/dev/urandom of=payload.bin bs=60000 count=1 2> /dev/null])
-OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > data], [nc.pid])
 NS_CHECK_EXEC([at_ns0], [nc $NC_EOF_OPT 10.1.1.100 1234 < payload.bin])
 
 dnl Wait until transfer completes before checking.
 OVS_WAIT_WHILE([kill -0 $(cat nc.pid)])
-AT_CHECK([diff -q payload.bin data], [0])
+AT_CHECK([diff -q payload.bin tcp_data], [0])
+
+dnl Check UDP
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=600 count=1 2> /dev/null])
+AT_CHECK([nc $NC_EOF_OPT -u 10.1.1.1 4321 < payload.bin])
 
+dnl The UDP listener will just listen forever if not terminated.
+OVS_WAIT_UNTIL([kill -0 $(cat nc2.pid)])
+AT_CHECK([kill $(cat nc2.pid)])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc2.pid)])
+AT_CHECK([diff -q payload.bin udp_data], [0])
 OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
@@ -389,6 +408,7 @@  OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
 AT_SETUP([datapath - ping over vxlan6 tunnel])
+AT_SKIP_IF([test $HAVE_NC = no])
 OVS_CHECK_VXLAN_UDP6ZEROCSUM()
 
 OVS_TRAFFIC_VSWITCHD_START()
@@ -412,6 +432,9 @@  ADD_NATIVE_TUNNEL6([vxlan], [at_vxlan1], [at_ns0], [fc00::100], [10.1.1.1/24],
 
 OVS_WAIT_UNTIL([ip netns exec at_ns0 ping6 -c 1 fc00::100])
 
+OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > data], [nc.pid])
+NETNS_DAEMONIZE([at_ns0], [nc -l -u 10.1.1.1 4321 > udp_data], [nc2.pid])
+
 dnl First, check the underlay
 NS_CHECK_EXEC([at_ns0], [ping6 -q -c 3 -i 0.3 -W 2 fc00::100 | FORMAT_PING], [0], [dnl
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
@@ -428,14 +451,29 @@  NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PI
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Verify that ncat is ready.
+OVS_WAIT_UNTIL([netstat -ln | grep :1234])
+OVS_WAIT_UNTIL([NS_EXEC([at_ns0], [netstat -ln | grep :4321])])
+
 dnl Check large bidirectional TCP.
 AT_CHECK([dd if=/dev/urandom of=payload.bin bs=60000 count=1 2> /dev/null])
-OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > data], [nc.pid])
 NS_CHECK_EXEC([at_ns0], [nc $NC_EOF_OPT 10.1.1.100 1234 < payload.bin])
 
 dnl Wait until transfer completes before checking.
 OVS_WAIT_WHILE([kill -0 $(cat nc.pid)])
 AT_CHECK([diff -q payload.bin data], [0])
+
+dnl Check UDP
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=600 count=1 2> /dev/null])
+AT_CHECK([nc $NC_EOF_OPT -u 10.1.1.1 4321 < payload.bin])
+
+dnl The UDP listener will just listen forever if not terminated.
+OVS_WAIT_UNTIL([kill -0 $(cat nc2.pid)])
+AT_CHECK([kill $(cat nc2.pid)])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc2.pid)])
+AT_CHECK([diff -q payload.bin udp_data], [0])
 OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
@@ -466,6 +504,10 @@  NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 172.31.1.100 | FORMAT_PING], [
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Start ncat listeners.
+OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > tcp_data], [nc.pid])
+NETNS_DAEMONIZE([at_ns0], [nc -l -u 10.1.1.1 4321 > udp_data], [nc2.pid])
+
 dnl Okay, now check the overlay with different packet sizes
 NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PING], [0], [dnl
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
@@ -477,6 +519,29 @@  NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PI
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Verify that ncat is ready.
+OVS_WAIT_UNTIL([netstat -ln | grep :1234])
+OVS_WAIT_UNTIL([NS_EXEC([at_ns0], [netstat -ln | grep :4321])])
+
+dnl Check large bidirectional TCP.
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=60000 count=1 2> /dev/null])
+NS_CHECK_EXEC([at_ns0], [nc $NC_EOF_OPT 10.1.1.100 1234 < payload.bin])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc.pid)])
+AT_CHECK([diff -q payload.bin tcp_data], [0])
+
+dnl Check UDP
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=600 count=1 2> /dev/null])
+AT_CHECK([nc $NC_EOF_OPT -u 10.1.1.1 4321 < payload.bin])
+
+dnl The UDP listener will just listen forever if not terminated.
+OVS_WAIT_UNTIL([kill -0 $(cat nc2.pid)])
+AT_CHECK([kill $(cat nc2.pid)])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc2.pid)])
+AT_CHECK([diff -q payload.bin udp_data], [0])
 OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
@@ -672,6 +737,7 @@  OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
 AT_SETUP([datapath - ping over geneve tunnel])
+AT_SKIP_IF([test $HAVE_NC = no])
 OVS_CHECK_GENEVE()
 
 OVS_TRAFFIC_VSWITCHD_START()
@@ -698,6 +764,10 @@  NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 172.31.1.100 | FORMAT_PING], [
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Start ncat listeners.
+OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > tcp_data], [nc.pid])
+NETNS_DAEMONIZE([at_ns0], [nc -l -u 10.1.1.1 4321 > udp_data], [nc2.pid])
+
 dnl Okay, now check the overlay with different packet sizes
 NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PING], [0], [dnl
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
@@ -709,15 +779,29 @@  NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PI
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Verify that ncat is ready.
+OVS_WAIT_UNTIL([netstat -ln | grep :1234])
+OVS_WAIT_UNTIL([NS_EXEC([at_ns0], [netstat -ln | grep :4321])])
+
 dnl Check large bidirectional TCP.
 AT_CHECK([dd if=/dev/urandom of=payload.bin bs=60000 count=1 2> /dev/null])
-OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > data], [nc.pid])
 NS_CHECK_EXEC([at_ns0], [nc $NC_EOF_OPT 10.1.1.100 1234 < payload.bin])
 
 dnl Wait until transfer completes before checking.
 OVS_WAIT_WHILE([kill -0 $(cat nc.pid)])
-AT_CHECK([diff -q payload.bin data], [0])
+AT_CHECK([diff -q payload.bin tcp_data], [0])
+
+dnl Check UDP
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=600 count=1 2> /dev/null])
+AT_CHECK([nc $NC_EOF_OPT -u 10.1.1.1 4321 < payload.bin])
 
+dnl The UDP listener will just listen forever if not terminated.
+OVS_WAIT_UNTIL([kill -0 $(cat nc2.pid)])
+AT_CHECK([kill $(cat nc2.pid)])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc2.pid)])
+AT_CHECK([diff -q payload.bin udp_data], [0])
 OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
@@ -827,6 +911,7 @@  OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP
 
 AT_SETUP([datapath - ping over geneve6 tunnel])
+AT_SKIP_IF([test $HAVE_NC = no])
 OVS_CHECK_GENEVE_UDP6ZEROCSUM()
 
 OVS_TRAFFIC_VSWITCHD_START()
@@ -855,6 +940,10 @@  NS_CHECK_EXEC([at_ns0], [ping6 -q -c 3 -i 0.3 -W 2 fc00::100 | FORMAT_PING], [0]
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Start ncat listeners.
+OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > tcp_data], [nc.pid])
+NETNS_DAEMONIZE([at_ns0], [nc -l -u 10.1.1.1 4321 > udp_data], [nc2.pid])
+
 dnl Okay, now check the overlay with different packet sizes
 NS_CHECK_EXEC([at_ns0], [ping -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PING], [0], [dnl
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
@@ -866,14 +955,29 @@  NS_CHECK_EXEC([at_ns0], [ping -s 3200 -q -c 3 -i 0.3 -W 2 10.1.1.100 | FORMAT_PI
 3 packets transmitted, 3 received, 0% packet loss, time 0ms
 ])
 
+dnl Verify that ncat is ready.
+OVS_WAIT_UNTIL([netstat -ln | grep :1234])
+OVS_WAIT_UNTIL([NS_EXEC([at_ns0], [netstat -ln | grep :4321])])
+
 dnl Check large bidirectional TCP.
 AT_CHECK([dd if=/dev/urandom of=payload.bin bs=60000 count=1 2> /dev/null])
-OVS_DAEMONIZE([nc -l 10.1.1.100 1234 > data], [nc.pid])
 NS_CHECK_EXEC([at_ns0], [nc $NC_EOF_OPT 10.1.1.100 1234 < payload.bin])
 
 dnl Wait until transfer completes before checking.
 OVS_WAIT_WHILE([kill -0 $(cat nc.pid)])
-AT_CHECK([diff -q payload.bin data], [0])
+AT_CHECK([diff -q payload.bin tcp_data], [0])
+
+dnl Check UDP
+AT_CHECK([dd if=/dev/urandom of=payload.bin bs=600 count=1 2> /dev/null])
+AT_CHECK([nc $NC_EOF_OPT -u 10.1.1.1 4321 < payload.bin])
+
+dnl The UDP listener will just listen forever if not terminated.
+OVS_WAIT_UNTIL([kill -0 $(cat nc2.pid)])
+AT_CHECK([kill $(cat nc2.pid)])
+
+dnl Wait until transfer completes before checking.
+OVS_WAIT_WHILE([kill -0 $(cat nc2.pid)])
+AT_CHECK([diff -q payload.bin udp_data], [0])
 OVS_TRAFFIC_VSWITCHD_STOP
 AT_CLEANUP