@@ -32,7 +32,7 @@ square brackets may optionally enclose other non-empty sets or single
values as well. For a column accepting a set of integers, database commands
accept a range. A range is represented by two integers separated by
\fB-\fR. A range is inclusive. A range has a maximum size of 4096
-elements. If more elements are needed, they can be specified in seperate
+elements. If more elements are needed, they can be specified in separate
ranges.
.PP
A few database columns are ``maps'' of key-value pairs, where the key
@@ -111,7 +111,7 @@ that a flow wildcards entirely; with \fB\-m\fR or \fB\-\-more\fR,
output includes all wildcarded fields.
.IP
If \fBfilter=\fIfilter\fR is specified, only displays the flows
-that match the \fIfilter\fR. \fIfilter\fR is a flow in the form similiar
+that match the \fIfilter\fR. \fIfilter\fR is a flow in the form similar
to that accepted by \fBovs\-ofctl\fR(8)'s \fBadd\-flow\fR command. (This is
not an OpenFlow flow: besides other differences, it never contains wildcards.)
The \fIfilter\fR is also useful to match wildcarded fields in the datapath
@@ -111,9 +111,9 @@ file, the new database will have the same schema and contents.
.IP
Leader election will be initiated by a follower if there is no heartbeat
received from the cluster leader within the specified election timer.
-The default leader election timer is 1000 miliseconds. To use a different value
-when creating the database, specify \fB\-\-election\-timer=\fIms\fR, where
-\fIms\fR is a value in miliseconds between 100 and 600000 inclusive.
+The default leader election timer is 1000 milliseconds. To use a different
+value when creating the database, specify \fB\-\-election\-timer=\fIms\fR,
+where \fIms\fR is a value in milliseconds between 100 and 600000 inclusive.
.
.IP "[\fB\-\-cid=\fIuuid\fR] \fBjoin\-cluster\fI db name local remote\fR..."
Use this command to initialize each server after the first one in an
@@ -303,7 +303,7 @@ case, \fIflow\fR specifies a flow entry in the format described in
\fBFlow Syntax\fR, below, \fIfile\fR is a text file that contains zero
or more flows in the same syntax, one per line, and the optional
\fB\-\-bundle\fR option operates the command as a single atomic
-transation, see option \fB\-\-bundle\fR, below.
+transaction, see option \fB\-\-bundle\fR, below.
.
.IP "[\fB\-\-bundle\fR] \fBadd\-flow \fIswitch flow\fR"
.IQ "[\fB\-\-bundle\fR] \fBadd\-flow \fIswitch \fB\- < \fIfile\fR"
@@ -379,7 +379,7 @@ case, \fIgroup\fR specifies a group entry in the format described in
\fBGroup Syntax\fR, below, and \fIfile\fR is a text file that contains
zero or more groups in the same syntax, one per line, and the optional
\fB\-\-bundle\fR option operates the command as a single atomic
-transation, see option \fB\-\-bundle\fR, below.
+transaction, see option \fB\-\-bundle\fR, below.
.PP
The group commands work only with switches that support OpenFlow 1.1
or later or the Open vSwitch group extensions to OpenFlow 1.0 (added
@@ -1093,7 +1093,7 @@ In those rare cases Open vSwitch 2.10 and later fall back to the \fBhash\fR
method with the default set of hash fields.
.RS
.IP \fBdp_hash\fR
-Use a datapath computed hash value. The hash algorithm varies accross
+Use a datapath computed hash value. The hash algorithm varies across
different datapath implementations. \fBdp_hash\fR uses the upper 32
bits of the \fBselection_method_param\fR as the datapath hash
algorithm selector. The supported values are \fB0\fR (corresponding to
@@ -692,7 +692,7 @@ the NetFlow record (since it is now unreferenced):
.SS "sFlow"
.PP
Configure bridge \fBbr0\fR to send sFlow records to a collector on
-10.0.0.1 at port 6343, using \fBeth1\fR\'s IP address as the source,
+10.0.0.1 at port 6343, using \fBeth1\fR's IP address as the source,
with specific sampling parameters:
.IP
.B "ovs\-vsctl \-\- \-\-id=@s create sFlow agent=eth1 target=\(rs\(dq10.0.0.1:6343\(rs\(dq header=128 sampling=64 polling=10 \(rs"
@@ -723,7 +723,7 @@
iterations.
</p>
<p>
- The defaul value is 1 min. If configured to 0 then it would be
+ The default value is 1 min. If configured to 0 then it would be
converted to default value i.e. 1 min
</p>
<p>
@@ -6041,7 +6041,7 @@ ovs-vsctl add-port br0 p0 -- set Interface p0 type=patch options:peer=p1 \
<code>recirc</code> actions with new action <code>lb_output</code>
and avoids recirculation of packet in datapath. It is supported
only for balance-tcp bond mode in netdev datapath. The new action
- gives higer performance by using bond buckets instead of post
+ gives higher performance by using bond buckets instead of post
recirculation flows for selection of slave port from bond. By default
this new action is disabled, however it can be enabled by setting
<ref column="other-config" key="lb-output-action"/> in
As reported by Debian lintian. Signed-off-by: Frode Nordahl <frode.nordahl@canonical.com> --- lib/db-ctl-base.man | 2 +- lib/dpctl.man | 2 +- ovsdb/ovsdb-tool.1.in | 6 +++--- utilities/ovs-ofctl.8.in | 6 +++--- utilities/ovs-vsctl.8.in | 2 +- vswitchd/vswitch.xml | 4 ++-- 6 files changed, 11 insertions(+), 11 deletions(-)