diff mbox

[2/3] gprs: Use area terms LAI/RAI as defined in GSM 03.03

Message ID 1401698941-10318-2-git-send-email-jerlbeck@sysmocom.de
State Accepted
Headers show

Commit Message

Jacob Erlbeck June 2, 2014, 8:49 a.m. UTC 
Currently the terms 'Routing area code' (RAC) and 'Location area
code' (LAC) are used in several places where 'Routing area
identification' (RAI) or 'Location area identification' (LAI) are
meant in fact.

This patch replaces RAC/LAC by RAI/LAI and 'code' by 'identification'
at these places.

Note that RAI := MCC MNC LAC RAC, and RAC := MCC MNC LAC (see GSM
03.03, sections 4.1 and 4.2).

Sponsored-by: On-Waves ehf
---
 openbsc/src/gprs/gb_proxy.c           |   54 +++++++--------
 openbsc/tests/gbproxy/gbproxy_test.ok |  120 ++++++++++++++++-----------------
 2 files changed, 87 insertions(+), 87 deletions(-)

Comments

Holger Freyther June 4, 2014, 2:28 p.m. UTC | #1 
On Mon, Jun 02, 2014 at 10:49:00AM +0200, Jacob Erlbeck wrote:

> Note that RAI := MCC MNC LAC RAC, and RAC := MCC MNC LAC (see GSM

		\            /		^^^^
		    LAI        RAC      LAI ??

> +	{ "inv-rai",	    "Invalid Routing Area Identifier " },
> +/* look-up a peer by its Routeing Area Identification (RAI) */

The spec you mention is using "routing". Please be consistent. Given
the question about s,RAC,LAI, I am waiting for your feedback.

holger
Jacob Erlbeck June 5, 2014, 8:23 a.m. UTC | #2 
On 04.06.2014 16:28, Holger Hans Peter Freyther wrote:
> On Mon, Jun 02, 2014 at 10:49:00AM +0200, Jacob Erlbeck wrote:
> 
>> Note that RAI := MCC MNC LAC RAC, and RAC := MCC MNC LAC (see GSM
> 
> 		\            /		^^^^
> 		    LAI        RAC      LAI ??

Oops, that was a typo of mine. Of course it's LAI := MCC MNC LAC.

> 
>> +	{ "inv-rai",	    "Invalid Routing Area Identifier " },
>> +/* look-up a peer by its Routeing Area Identification (RAI) */
> 
> The spec you mention is using "routing". Please be consistent. 

Unfortunately the specs themselves are not consistent with respect to
this, GSM 08.18 is using the British variant. Thus the identifier in
gsm_08_18.h also use the ROUTEING variant.

The C file already was mixing the British and the American English
variants. This commit didn't add any 'rout(e)ing' term, it focused on
the 'code' issue.

While I agree that we should strive for consistency, I'd rather put it
into a specific commit when we've settled on which variant shall be taken.

Jacob

> Given
> the question about s,RAC,LAI, I am waiting for your feedback.
> 
> holger
> 
>
diff mbox

Patch

diff --git a/openbsc/src/gprs/gb_proxy.c b/openbsc/src/gprs/gb_proxy.c
index 3c41529..4799344 100644
--- a/openbsc/src/gprs/gb_proxy.c
+++ b/openbsc/src/gprs/gb_proxy.c
@@ -45,8 +45,8 @@ 
 
 enum gbprox_global_ctr {
 	GBPROX_GLOB_CTR_INV_BVCI,
-	GBPROX_GLOB_CTR_INV_LAC,
-	GBPROX_GLOB_CTR_INV_RAC,
+	GBPROX_GLOB_CTR_INV_LAI,
+	GBPROX_GLOB_CTR_INV_RAI,
 	GBPROX_GLOB_CTR_INV_NSEI,
 	GBPROX_GLOB_CTR_PROTO_ERR_BSS,
 	GBPROX_GLOB_CTR_PROTO_ERR_SGSN,
@@ -59,8 +59,8 @@  enum gbprox_global_ctr {
 
 static const struct rate_ctr_desc global_ctr_description[] = {
 	{ "inv-bvci",	    "Invalid BVC Identifier          " },
-	{ "inv-lac",	    "Invalid Location Area Code      " },
-	{ "inv-rac",	    "Invalid Routing Area Code       " },
+	{ "inv-lai",	    "Invalid Location Area Identifier" },
+	{ "inv-rai",	    "Invalid Routing Area Identifier " },
 	{ "inv-nsei",	    "No BVC established for NSEI     " },
 	{ "proto-err.bss",  "BSSGP protocol error      (BSS )" },
 	{ "proto-err.sgsn", "BSSGP protocol error      (SGSN)" },
@@ -154,8 +154,8 @@  static struct gbprox_peer *peer_by_nsei(uint16_t nsei)
 	return NULL;
 }
 
-/* look-up a peer by its Routeing Area Code (RAC) */
-static struct gbprox_peer *peer_by_rac(const uint8_t *ra)
+/* look-up a peer by its Routeing Area Identification (RAI) */
+static struct gbprox_peer *peer_by_rai(const uint8_t *ra)
 {
 	struct gbprox_peer *peer;
 	llist_for_each_entry(peer, &gbprox_bts_peers, list) {
@@ -165,8 +165,8 @@  static struct gbprox_peer *peer_by_rac(const uint8_t *ra)
 	return NULL;
 }
 
-/* look-up a peer by its Location Area Code (LAC) */
-static struct gbprox_peer *peer_by_lac(const uint8_t *la)
+/* look-up a peer by its Location Area Identification (LAI) */
+static struct gbprox_peer *peer_by_lai(const uint8_t *la)
 {
 	struct gbprox_peer *peer;
 	llist_for_each_entry(peer, &gbprox_bts_peers, list) {
@@ -389,11 +389,11 @@  static int gbprox_rx_sig_from_bss(struct msgb *msg, uint16_t nsei,
 	switch (pdu_type) {
 	case BSSGP_PDUT_SUSPEND:
 	case BSSGP_PDUT_RESUME:
-		/* We implement RAC snooping during SUSPEND/RESUME, since
-		 * it establishes a relationsip between BVCI/peer and the
-		 * routeing area code.  The snooped information is then
-		 * used for routing the {SUSPEND,RESUME}_[N]ACK back to
-		 * the correct BSSGP */
+		/* We implement RAI snooping during SUSPEND/RESUME, since it
+		 * establishes a relationsip between BVCI/peer and the routeing
+		 * area identification.  The snooped information is then used
+		 * for routing the {SUSPEND,RESUME}_[N]ACK back to the correct
+		 * BSSGP */
 		if (!TLVP_PRESENT(&tp, BSSGP_IE_ROUTEING_AREA))
 			goto err_mand_ie;
 		from_peer = peer_by_nsei(nsei);
@@ -403,7 +403,7 @@  static int gbprox_rx_sig_from_bss(struct msgb *msg, uint16_t nsei,
 			sizeof(from_peer->ra));
 		gsm48_parse_ra(&raid, from_peer->ra);
 		LOGP(DGPRS, LOGL_INFO, "NSEI=%u BSSGP SUSPEND/RESUME "
-			"RAC snooping: RAC %u-%u-%u-%u behind BVCI=%u\n",
+			"RAI snooping: RAI %u-%u-%u-%u behind BVCI=%u\n",
 			nsei, raid.mcc, raid.mnc, raid.lac,
 			raid.rac , from_peer->bvci);
 		/* FIXME: This only supports one BSS per RA */
@@ -485,15 +485,15 @@  static int gbprox_rx_paging(struct msgb *msg, struct tlv_parsed *tp,
 			bvci);
 		errctr = GBPROX_GLOB_CTR_OTHER_ERR;
 	} else if (TLVP_PRESENT(tp, BSSGP_IE_ROUTEING_AREA)) {
-		peer = peer_by_rac(TLVP_VAL(tp, BSSGP_IE_ROUTEING_AREA));
-		LOGPC(DGPRS, LOGL_INFO, "routing by RAC to peer BVCI=%u\n",
+		peer = peer_by_rai(TLVP_VAL(tp, BSSGP_IE_ROUTEING_AREA));
+		LOGPC(DGPRS, LOGL_INFO, "routing by RAI to peer BVCI=%u\n",
 			peer ? peer->bvci : -1);
-		errctr = GBPROX_GLOB_CTR_INV_RAC;
+		errctr = GBPROX_GLOB_CTR_INV_RAI;
 	} else if (TLVP_PRESENT(tp, BSSGP_IE_LOCATION_AREA)) {
-		peer = peer_by_lac(TLVP_VAL(tp, BSSGP_IE_LOCATION_AREA));
-		LOGPC(DGPRS, LOGL_INFO, "routing by LAC to peer BVCI=%u\n",
+		peer = peer_by_lai(TLVP_VAL(tp, BSSGP_IE_LOCATION_AREA));
+		LOGPC(DGPRS, LOGL_INFO, "routing by LAI to peer BVCI=%u\n",
 			peer ? peer->bvci : -1);
-		errctr = GBPROX_GLOB_CTR_INV_LAC;
+		errctr = GBPROX_GLOB_CTR_INV_LAI;
 	} else
 		LOGPC(DGPRS, LOGL_INFO, "\n");
 
@@ -590,7 +590,7 @@  static int gbprox_rx_sig_from_sgsn(struct msgb *msg, uint32_t nsei,
 		break;
 	case BSSGP_PDUT_PAGING_PS:
 	case BSSGP_PDUT_PAGING_CS:
-		/* process the paging request (LAC/RAC lookup) */
+		/* process the paging request (LAI/RAI lookup) */
 		rc = gbprox_rx_paging(msg, &tp, nsei, ns_bvci);
 		break;
 	case BSSGP_PDUT_STATUS:
@@ -616,10 +616,10 @@  static int gbprox_rx_sig_from_sgsn(struct msgb *msg, uint32_t nsei,
 	case BSSGP_PDUT_SUSPEND_NACK:
 	case BSSGP_PDUT_RESUME_ACK:
 	case BSSGP_PDUT_RESUME_NACK:
-		/* RAC IE is mandatory */
+		/* RAI IE is mandatory */
 		if (!TLVP_PRESENT(&tp, BSSGP_IE_ROUTEING_AREA))
 			goto err_mand_ie;
-		peer = peer_by_rac(TLVP_VAL(&tp, BSSGP_IE_ROUTEING_AREA));
+		peer = peer_by_rai(TLVP_VAL(&tp, BSSGP_IE_ROUTEING_AREA));
 		if (!peer)
 			goto err_no_peer;
 		rc = gbprox_relay2peer(msg, peer, ns_bvci);
@@ -666,9 +666,9 @@  err_mand_ie:
 		     ctr[GBPROX_GLOB_CTR_PROTO_ERR_SGSN]);
 	return bssgp_tx_status(BSSGP_CAUSE_MISSING_MAND_IE, NULL, msg);
 err_no_peer:
-	LOGP(DGPRS, LOGL_ERROR, "NSEI=%u(SGSN) cannot find peer based on RAC\n",
+	LOGP(DGPRS, LOGL_ERROR, "NSEI=%u(SGSN) cannot find peer based on RAI\n",
 		nsei);
-	rate_ctr_inc(&get_global_ctrg()-> ctr[GBPROX_GLOB_CTR_INV_RAC]);
+	rate_ctr_inc(&get_global_ctrg()-> ctr[GBPROX_GLOB_CTR_INV_RAI]);
 	return bssgp_tx_status(BSSGP_CAUSE_UNKNOWN_BVCI, NULL, msg);
 }
 
@@ -853,7 +853,7 @@  int gbprox_dump_peers(FILE *stream, int indent, int verbose)
 		gsm48_parse_ra(&raid, peer->ra);
 
 		rc = fprintf(stream, "%*s  NSEI %u, BVCI %u, %sblocked, "
-			     "RAC %u-%u-%u-%u\n",
+			     "RAI %u-%u-%u-%u\n",
 			     indent, "",
 			     peer->nsei, peer->bvci,
 			     peer->blocked ? "" : "not ",
@@ -921,7 +921,7 @@  static void gbprox_vty_print_peer(struct vty *vty, struct gbprox_peer *peer)
 	gsm48_parse_ra(&raid, peer->ra);
 
 	vty_out(vty, "NSEI %5u, PTP-BVCI %5u, "
-		"RAC %u-%u-%u-%u",
+		"RAI %u-%u-%u-%u",
 		peer->nsei, peer->bvci,
 		raid.mcc, raid.mnc, raid.lac, raid.rac);
 	if (peer->blocked)
diff --git a/openbsc/tests/gbproxy/gbproxy_test.ok b/openbsc/tests/gbproxy/gbproxy_test.ok
index e677ec0..3b25922 100644
--- a/openbsc/tests/gbproxy/gbproxy_test.ok
+++ b/openbsc/tests/gbproxy/gbproxy_test.ok
@@ -101,7 +101,7 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
 00 00 00 00 23 04 82 10 02 
 
@@ -179,8 +179,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
 00 00 00 00 23 04 82 20 02 
 
@@ -242,8 +242,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Move BSS 2 to former BSS 1 port ---
 
 Setup NS-VC: remote 0x01020304:1111, NSVCI 0x2001(8193), NSEI 0x2000(8192)
@@ -291,8 +291,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Move BSS 1 to current BSS 2 port ---
 
 Setup NS-VC: remote 0x01020304:1111, NSVCI 0x2001(8193), NSEI 0x2000(8192)
@@ -340,8 +340,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Move BSS 2 to new port ---
 
 Setup NS-VC: remote 0x01020304:4444, NSVCI 0x2001(8193), NSEI 0x2000(8192)
@@ -389,8 +389,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Move BSS 2 to former BSS 1 port ---
 
 Setup NS-VC: remote 0x01020304:3333, NSVCI 0x2001(8193), NSEI 0x2000(8192)
@@ -441,8 +441,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Move BSS 1 to original BSS 1 port ---
 
 Setup NS-VC: remote 0x01020304:1111, NSVCI 0x1001(4097), NSEI 0x1000(4096)
@@ -491,8 +491,8 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Reset BSS 1 with a new BVCI ---
 
 Setup BSSGP: remote 0x01020304:1111, BVCI 0x1012(4114)
@@ -519,9 +519,9 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4114, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
 00 00 00 00 23 04 82 10 12 
 
@@ -562,9 +562,9 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4114, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
 00 00 00 00 23 04 82 10 02 
 
@@ -605,9 +605,9 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4114, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
 00 00 00 00 23 04 82 10 02 
 
@@ -744,10 +744,10 @@  Current NS-VCIs:
          NS-VC Block count         : 1
 
 Peers:
-  NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4114, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 Gbproxy global:
 PROCESSING BVC_RESET_ACK from 0x05060708:32000
@@ -932,7 +932,7 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Setup BVCI 2 ---
 
 Setup BSSGP: remote 0x01020304:1111, BVCI 0x2002(8194)
@@ -966,8 +966,8 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 4098, not blocked, RAI 112-332-16464-96
 --- Send message from BSS 1 to SGSN and back, BVCI 1 ---
 
 PROCESSING UNITDATA from 0x01020304:1111
@@ -1107,8 +1107,8 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Setup BVCI 3 ---
 
@@ -1143,9 +1143,9 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Send message from BSS 1 to SGSN and back, BVCI 1 ---
 
@@ -1194,10 +1194,10 @@  MESSAGE to SGSN at 0x05060708:32000, msg length 4
 result (UNITDATA) = 4
 
 Peers:
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 PROCESSING UNITDATA from 0x05060708:32000
 00 00 20 02 
@@ -1211,11 +1211,11 @@  NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
 result (UNITDATA) = -22
 
 Peers:
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
     NS Transmission error           : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Send message from BSS 1 to SGSN and back, BVCI 3 ---
 
@@ -1330,11 +1330,11 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
     NS Transmission error           : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Setup BVCI 4 ---
 
@@ -1369,12 +1369,12 @@  MESSAGE to BSS at 0x01020304:1111, msg length 9
 result (BVC_RESET_ACK) = 9
 
 Peers:
-  NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 16386, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
     NS Transmission error           : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Send message from BSS 1 to SGSN and back, BVCI 1 ---
 
@@ -1423,12 +1423,12 @@  MESSAGE to SGSN at 0x05060708:32000, msg length 4
 result (UNITDATA) = 4
 
 Peers:
-  NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 16386, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 2
     NS Transmission error           : 1
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 PROCESSING UNITDATA from 0x05060708:32000
 00 00 20 02 
@@ -1442,12 +1442,12 @@  NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
 result (UNITDATA) = -22
 
 Peers:
-  NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 16386, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 2
     NS Transmission error           : 2
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 --- Send message from BSS 1 to SGSN and back, BVCI 3 ---
 
@@ -1511,12 +1511,12 @@  result (UNITDATA) = 4
 
 Gbproxy global:
 Peers:
-  NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
-  NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
-  NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 16386, not blocked, RAI 112-332-16464-96
+  NSEI 8192, BVCI 12290, not blocked, RAI 112-332-16464-96
+  NSEI 4096, BVCI 8194, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 2
     NS Transmission error           : 2
-  NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
+  NSEI 8192, BVCI 4098, not blocked, RAI 112-332-16464-96
     NSEI mismatch                   : 1
 ===== GbProxy test END