diff mbox series

[v2,1/3] dt-bindings: hwmon: Add maxim max31790 bindings

Message ID 20240414042246.8681-2-chanh@os.amperecomputing.com
State New
Headers show
Series Update the max31790 driver | expand

Commit Message

Chanh Nguyen April 14, 2024, 4:22 a.m. UTC
Add a device tree bindings for max31790 device.

Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
---
Changes in v2:
 - Update filename of the maxim,max31790.yaml                            [Krzysztof]
 - Add the common fan schema to $ref                                     [Krzysztof]
 - Update the node name to "fan-controller" in maxim,max31790.yaml       [Krzysztof]
 - Drop "driver" in commit title                                         [Krzysztof]
---
 .../bindings/hwmon/maxim,max31790.yaml        | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml

Comments

Chanh Nguyen April 16, 2024, 4:38 a.m. UTC | #1
On 14/04/2024 13:03, Krzysztof Kozlowski wrote:
> On 14/04/2024 06:22, Chanh Nguyen wrote:
>> Add a device tree bindings for max31790 device.
>>
> 
> Nothing improved in commit msg, where is the rationale of split of bindings?
> 

Yes Krzysztof, I will use "tach-ch" property from the fan-common.yaml to 
solve my case. So I will not need a split of bindings.

Finally, my patch series will only be two patches. They are 
"dt-bindings: hwmon: Add maxim max31790" and "hwmon: (max31790): Support 
config PWM output becomes TACH".

I'm going to update that in the patch v3 series.

> A nit, subject: drop second/last, redundant "bindings". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> 

Thank Krzysztof, I'll drop "bindings" in commit msg.

>> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
>> ---
>> Changes in v2:
>>   - Update filename of the maxim,max31790.yaml                            [Krzysztof]
>>   - Add the common fan schema to $ref                                     [Krzysztof]
>>   - Update the node name to "fan-controller" in maxim,max31790.yaml       [Krzysztof]
>>   - Drop "driver" in commit title                                         [Krzysztof]
>> ---
>>   .../bindings/hwmon/maxim,max31790.yaml        | 52 +++++++++++++++++++
>>   1 file changed, 52 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
>> new file mode 100644
>> index 000000000000..a561e5a3e9e4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
>> @@ -0,0 +1,52 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: The Maxim MAX31790 Fan Controller
>> +
>> +maintainers:
>> +  - Guenter Roeck <linux@roeck-us.net>
>> +
>> +description: >
>> +  The MAX31790 controls the speeds of up to six fans using six
>> +  independent PWM outputs. The desired fan speeds (or PWM duty cycles)
>> +  are written through the I2C interface.
>> +
>> +  Datasheets:
>> +    https://datasheets.maximintegrated.com/en/ds/MAX31790.pdf
>> +
>> +properties:
>> +  compatible:
>> +    const: maxim,max31790
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +allOf:
>> +  - $ref: fan-common.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    i2c {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      fan-controller@20 {
>> +        compatible = "maxim,max31790";
>> +        reg = <0x20>;
> 
> Make the example complete - add all properties, like clocks, resets and
> any others which are applicable.
> 

Ok Krzysztof, I'll update that in the patch v3

> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
new file mode 100644
index 000000000000..a561e5a3e9e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Maxim MAX31790 Fan Controller
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: >
+  The MAX31790 controls the speeds of up to six fans using six
+  independent PWM outputs. The desired fan speeds (or PWM duty cycles)
+  are written through the I2C interface.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX31790.pdf
+
+properties:
+  compatible:
+    const: maxim,max31790
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: fan-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fan-controller@20 {
+        compatible = "maxim,max31790";
+        reg = <0x20>;
+      };
+    };