@@ -16,7 +16,36 @@ Required clocking property, have to be one of:
timer (usually 25000000).
Optional properties:
+- syscon: a phandle to access GCR registers.
- timeout-sec : Contains the watchdog timeout in seconds
+- nuvoton,restart-priority - Contains the card restart priority.
+- nuvoton,card-reset-type = "porst|corst|wd0|wd1|wd2|sw1|sw2|sw3|sw4"
+ Contains the card reset type for checking and indicating
+ the last card reset status (WDIOF_CARDRESET)
+
+ If 'nuvoton,card-reset-type' is not specified the default is porst
+
+ Reset types:
+ - porst: Power reset
+ - corst: Core reset
+ - wdX : Watchdog reset X (X represante 0-2)
+ - swX : Software reset X (X represante 1-4)
+
+- nuvoton,ext1-reset-type = "porst|corst|wd0|wd1|wd2|sw1|sw2|sw3|sw4"
+ Contains the external 2 reset type for checking and indicating
+ the last external 2 reset status (WDIOF_EXTERN1)
+
+ If 'nuvoton,card-reset-type' is not specified the default is wd0.
+
+ Reset types are the same as in nuvoton,card-reset-type property.
+
+- nuvoton,ext2-reset-type = "porst|corst|wd0|wd1|wd2|sw1|sw2|sw3|sw4"
+ Contains the external 2 reset type for checking and indicating
+ the last external 2 reset status (WDIOF_EXTERN2)
+
+ If 'nuvoton,card-reset-type' is not specified the default is sw1.
+
+ Reset types are the same as in nuvoton,card-reset-type property.
Example:
@@ -25,4 +54,9 @@ timer@f000801c {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf000801c 0x4>;
clocks = <&clk NPCM7XX_CLK_TIMER>;
+ syscon = <&gcr>;
+ nuvoton,restart-priority = <155>;
+ nuvoton,card-reset-type = "porst";
+ nuvoton,ext1-reset-type = "wd1";
+ nuvoton,ext2-reset-type = "sw2";
};
Add device tree restart priority documentation and three reset types documentation. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- .../bindings/watchdog/nuvoton,npcm-wdt.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)