diff mbox series

[1/2,v3] e1000e: Leverage direct_complete to speed up s2ram

Message ID b8896b7748e516e9c440ab22e582e30f1389776c.1606757180.git.yu.c.chen@intel.com
State New
Headers show
Series Put the NIC in runtime suspended during s2ram | expand

Commit Message

Chen Yu Dec. 1, 2020, 1:21 a.m. UTC
The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to wake
up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.

This patch introduces the .prepare() for e1000e so that if the NIC is runtime
suspended the subsequent suspend/resume hooks will be skipped so as to speed
up the s2ram. The pm core will check whether the NIC is a wake up device so
there's no need to check it again in .prepare(). DPM_FLAG_SMART_PREPARE flag
should be set during probe to ask the pci subsystem to honor the driver's
prepare() result. Besides, the NIC remains runtime suspended after resumed
from s2ram as there is no need to resume it.

Tested on i7-2600K with 82579V NIC
Before the patch:
e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x160 returned 0 after 225146 usecs
e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 140588 usecs

After the patch:
echo disabled > //sys/devices/pci0000\:00/0000\:00\:19.0/power/wakeup
becomes 0 usecs because the hooks will be skipped.

Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
v2: Added test data and some commit log revise(Paul Menzel)
    Only skip the suspend/resume if the NIC is not a wake up device specified
    by the user(Kai-Heng Feng)
v3: Leverage direct complete mechanism to skip all hooks(Kai-Heng Feng)
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Comments

Kai-Heng Feng Dec. 2, 2020, 1:06 p.m. UTC | #1
Hi Yu,

> On Dec 1, 2020, at 09:21, Chen Yu <yu.c.chen@intel.com> wrote:
> 
> The NIC is put in runtime suspend status when there is no cable connected.
> As a result, it is safe to keep non-wakeup NIC in runtime suspended during
> s2ram because the system does not rely on the NIC plug event nor WoL to wake
> up the system. Besides that, unlike the s2idle, s2ram does not need to
> manipulate S0ix settings during suspend.
> 
> This patch introduces the .prepare() for e1000e so that if the NIC is runtime
> suspended the subsequent suspend/resume hooks will be skipped so as to speed
> up the s2ram. The pm core will check whether the NIC is a wake up device so
> there's no need to check it again in .prepare(). DPM_FLAG_SMART_PREPARE flag
> should be set during probe to ask the pci subsystem to honor the driver's
> prepare() result. Besides, the NIC remains runtime suspended after resumed
> from s2ram as there is no need to resume it.
> 
> Tested on i7-2600K with 82579V NIC
> Before the patch:
> e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x160 returned 0 after 225146 usecs
> e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 140588 usecs
> 
> After the patch:
> echo disabled > //sys/devices/pci0000\:00/0000\:00\:19.0/power/wakeup
> becomes 0 usecs because the hooks will be skipped.
> 
> Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Signed-off-by: Chen Yu <yu.c.chen@intel.com>

Well, I was intended to send it, but anyway :)

> ---
> v2: Added test data and some commit log revise(Paul Menzel)
>    Only skip the suspend/resume if the NIC is not a wake up device specified
>    by the user(Kai-Heng Feng)
> v3: Leverage direct complete mechanism to skip all hooks(Kai-Heng Feng)
> ---
> drivers/net/ethernet/intel/e1000e/netdev.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index b30f00891c03..b210bba3f20a 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -25,6 +25,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/aer.h>
> #include <linux/prefetch.h>
> +#include <linux/suspend.h>
> 
> #include "e1000.h"
> 
> @@ -6957,6 +6958,12 @@ static int __e1000_resume(struct pci_dev *pdev)
> 	return 0;
> }
> 
> +static int e1000e_pm_prepare(struct device *dev)
> +{
> +	return pm_runtime_suspended(dev) &&
> +		pm_suspend_via_firmware();
> +}
> +
> static __maybe_unused int e1000e_pm_suspend(struct device *dev)
> {
> 	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
> @@ -7665,7 +7672,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> 
> 	e1000_print_device_info(adapter);
> 
> -	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
> +	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);

This isn't required for pci_pm_prepare() to use driver's .prepare callback.

> 
> 	if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
> 		pm_runtime_put_noidle(&pdev->dev);
> @@ -7890,6 +7897,7 @@ MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
> 
> static const struct dev_pm_ops e1000_pm_ops = {
> #ifdef CONFIG_PM_SLEEP
> +	.prepare	= e1000e_pm_prepare,

How do we make sure a link change happened in S3 can be detect after resume, without a .complete callback which ask device to runtime resume?

Kai-Heng

> 	.suspend	= e1000e_pm_suspend,
> 	.resume		= e1000e_pm_resume,
> 	.freeze		= e1000e_pm_freeze,
> -- 
> 2.17.1
>
Chen Yu Dec. 2, 2020, 3:40 p.m. UTC | #2
Hi Kai-Heng,
On Wed, Dec 02, 2020 at 09:06:19PM +0800, Kai-Heng Feng wrote:
> > ---
> > v2: Added test data and some commit log revise(Paul Menzel)
> >    Only skip the suspend/resume if the NIC is not a wake up device specified
> >    by the user(Kai-Heng Feng)
> > v3: Leverage direct complete mechanism to skip all hooks(Kai-Heng Feng)
> > ---
> > 
> > -	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
> > +	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);
> 
> This isn't required for pci_pm_prepare() to use driver's .prepare callback.
>
pci_pm_prepare() is likely to return 1 even if driver's prepare() return 0,
when DPM_FLAG_SMART_PREPARE is not set, which might cause prblems:
if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE))
	return 0;
> > 
> > 	if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
> > 		pm_runtime_put_noidle(&pdev->dev);
> > @@ -7890,6 +7897,7 @@ MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
> > 
> > static const struct dev_pm_ops e1000_pm_ops = {
> > #ifdef CONFIG_PM_SLEEP
> > +	.prepare	= e1000e_pm_prepare,
> 
> How do we make sure a link change happened in S3 can be detect after resume, without a .complete callback which ask device to runtime resume?
> 
The pm core's device_complete() has already done that pm_runtime_put() in the end.

Just talked to Rafael and he might also give some feedbacks later.

thanks,
Chenyu
> Kai-Heng
> 
>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index b30f00891c03..b210bba3f20a 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -25,6 +25,7 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/aer.h>
 #include <linux/prefetch.h>
+#include <linux/suspend.h>
 
 #include "e1000.h"
 
@@ -6957,6 +6958,12 @@  static int __e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 
+static int e1000e_pm_prepare(struct device *dev)
+{
+	return pm_runtime_suspended(dev) &&
+		pm_suspend_via_firmware();
+}
+
 static __maybe_unused int e1000e_pm_suspend(struct device *dev)
 {
 	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
@@ -7665,7 +7672,7 @@  static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	e1000_print_device_info(adapter);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);
 
 	if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
 		pm_runtime_put_noidle(&pdev->dev);
@@ -7890,6 +7897,7 @@  MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 
 static const struct dev_pm_ops e1000_pm_ops = {
 #ifdef CONFIG_PM_SLEEP
+	.prepare	= e1000e_pm_prepare,
 	.suspend	= e1000e_pm_suspend,
 	.resume		= e1000e_pm_resume,
 	.freeze		= e1000e_pm_freeze,