diff mbox series

[2/2] net: dsa: ksz8795: adjust CPU link to host interface

Message ID 20201129102400.157786-2-jean.pihet@newoldbits.com
State Superseded
Headers show
Series [1/2] net: dsa: ksz: pad frame to 64 bytes for transmission | expand

Commit Message

Jean Pihet Nov. 29, 2020, 10:24 a.m. UTC 
Add support for RGMII in 100 and 1000 Mbps.

Adjust the CPU port based on the host interface settings: interface
MII type, speed, duplex.

Signed-off-by: Jean Pihet <jean.pihet@newoldbits.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 93 ++++++++++++++++++-----------
 1 file changed, 57 insertions(+), 36 deletions(-)

Comments

kernel test robot Nov. 29, 2020, 12:51 p.m. UTC | #1 
Hi Jean,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net/master]
[also build test WARNING on ipvs/master linus/master v5.10-rc5]
[cannot apply to net-next/master next-20201127]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Jean-Pihet/net-dsa-ksz-pad-frame-to-64-bytes-for-transmission/20201129-182750
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git 4d521943f76bd0d1e68ea5e02df7aadd30b2838a
config: i386-randconfig-s031-20201129 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.3-170-g3bc348f6-dirty
        # https://github.com/0day-ci/linux/commit/5a255bc7fbe20060c6f86dfaa0bbe9fbcd024128
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Jean-Pihet/net-dsa-ksz-pad-frame-to-64-bytes-for-transmission/20201129-182750
        git checkout 5a255bc7fbe20060c6f86dfaa0bbe9fbcd024128
        # save the attached .config to linux build tree
        make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=i386 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


"sparse warnings: (new ones prefixed by >>)"
>> drivers/net/dsa/microchip/ksz8795.c:1114:6: sparse: sparse: symbol 'ksz8795_adjust_link' was not declared. Should it be static?

Please review and possibly fold the followup patch.

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
kernel test robot Nov. 29, 2020, 1:17 p.m. UTC | #2 
Hi Jean,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net/master]
[also build test WARNING on ipvs/master linus/master v5.10-rc5]
[cannot apply to net-next/master next-20201127]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Jean-Pihet/net-dsa-ksz-pad-frame-to-64-bytes-for-transmission/20201129-182750
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git 4d521943f76bd0d1e68ea5e02df7aadd30b2838a
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/5a255bc7fbe20060c6f86dfaa0bbe9fbcd024128
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Jean-Pihet/net-dsa-ksz-pad-frame-to-64-bytes-for-transmission/20201129-182750
        git checkout 5a255bc7fbe20060c6f86dfaa0bbe9fbcd024128
        # save the attached .config to linux build tree
        make W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/net/dsa/microchip/ksz8795.c:1114:6: warning: no previous prototype for 'ksz8795_adjust_link' [-Wmissing-prototypes]
    1114 | void ksz8795_adjust_link(struct dsa_switch *ds, int port,
         |      ^~~~~~~~~~~~~~~~~~~

vim +/ksz8795_adjust_link +1114 drivers/net/dsa/microchip/ksz8795.c

  1113	
> 1114	void ksz8795_adjust_link(struct dsa_switch *ds, int port,
  1115							 struct phy_device *phydev)
  1116	{
  1117		struct ksz_device *dev = ds->priv;
  1118		struct ksz_port *p = &dev->ports[port];
  1119	
  1120		/* Adjust the link interface mode and speed for the CPU port */
  1121		if (port == dev->cpu_port)
  1122			ksz8795_mii_config(dev, p);
  1123	}
  1124	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Andrew Lunn Nov. 29, 2020, 5:07 p.m. UTC | #3 
On Sun, Nov 29, 2020 at 11:24:00AM +0100, Jean Pihet wrote:
> Add support for RGMII in 100 and 1000 Mbps.
> 
> Adjust the CPU port based on the host interface settings: interface
> MII type, speed, duplex.

Please could you add some extra information here why this is needed. I
suspect you have back to back PHYs on the CPU port?

> +void ksz8795_adjust_link(struct dsa_switch *ds, int port,
> +						 struct phy_device *phydev)
> +{
> +	struct ksz_device *dev = ds->priv;
> +	struct ksz_port *p = &dev->ports[port];
> +
> +	/* Adjust the link interface mode and speed for the CPU port */
> +	if (port == dev->cpu_port)

dsa_is_cpu_port(ds, port)

		    Andrew
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 1e101ab56cea..09c1173cc607 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -916,10 +916,53 @@  static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
+static void ksz8795_mii_config(struct ksz_device *dev, struct ksz_port *p)
+{
+	u8 data8;
+
+	/* Configure MII interface for proper network communication. */
+	ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+	data8 &= ~PORT_INTERFACE_TYPE;
+	data8 &= ~PORT_GMII_1GPS_MODE;
+	switch (p->interface) {
+	case PHY_INTERFACE_MODE_MII:
+		p->phydev.speed = SPEED_100;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		data8 |= PORT_INTERFACE_RMII;
+		p->phydev.speed = SPEED_100;
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		data8 |= PORT_GMII_1GPS_MODE;
+		data8 |= PORT_INTERFACE_GMII;
+		p->phydev.speed = SPEED_1000;
+		break;
+	default:
+		data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+		data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			data8 |= PORT_RGMII_ID_IN_ENABLE;
+		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			data8 |= PORT_RGMII_ID_OUT_ENABLE;
+		/* Support RGMII in 100 and 1000 Mbps */
+		if (p->phydev.speed == SPEED_1000) {
+			data8 |= PORT_GMII_1GPS_MODE;
+		} else {
+			p->phydev.speed = SPEED_100;
+		}
+		data8 |= PORT_INTERFACE_RGMII;
+		break;
+	}
+	ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+	p->phydev.duplex = 1;
+}
+
 static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct ksz_port *p = &dev->ports[port];
-	u8 data8, member;
+	u8 member;
 
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
@@ -943,41 +986,7 @@  static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 				 port);
 			p->interface = dev->compat_interface;
 		}
-
-		/* Configure MII interface for proper network communication. */
-		ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
-		data8 &= ~PORT_INTERFACE_TYPE;
-		data8 &= ~PORT_GMII_1GPS_MODE;
-		switch (p->interface) {
-		case PHY_INTERFACE_MODE_MII:
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_RMII:
-			data8 |= PORT_INTERFACE_RMII;
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_GMII:
-			data8 |= PORT_GMII_1GPS_MODE;
-			data8 |= PORT_INTERFACE_GMII;
-			p->phydev.speed = SPEED_1000;
-			break;
-		default:
-			data8 &= ~PORT_RGMII_ID_IN_ENABLE;
-			data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-				data8 |= PORT_RGMII_ID_IN_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-				data8 |= PORT_RGMII_ID_OUT_ENABLE;
-			data8 |= PORT_GMII_1GPS_MODE;
-			data8 |= PORT_INTERFACE_RGMII;
-			p->phydev.speed = SPEED_1000;
-			break;
-		}
-		ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
-		p->phydev.duplex = 1;
-
+        ksz8795_mii_config(dev, p);
 		member = dev->port_mask;
 	} else {
 		member = dev->host_mask | p->vid_member;
@@ -1102,11 +1111,23 @@  static int ksz8795_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+void ksz8795_adjust_link(struct dsa_switch *ds, int port,
+						 struct phy_device *phydev)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* Adjust the link interface mode and speed for the CPU port */
+	if (port == dev->cpu_port)
+		ksz8795_mii_config(dev, p);
+}
+
 static const struct dsa_switch_ops ksz8795_switch_ops = {
 	.get_tag_protocol	= ksz8795_get_tag_protocol,
 	.setup			= ksz8795_setup,
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
+	.adjust_link		= ksz8795_adjust_link,
 	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_enable		= ksz_enable_port,
 	.get_strings		= ksz8795_get_strings,