diff mbox series

docs: networking: phy: s/2.5 times faster/2.5 times as fast/

Message ID 20201107220822.1291215-1-j.neuschaefer@gmx.net
State Accepted
Delegated to: David Miller
Headers show
Series docs: networking: phy: s/2.5 times faster/2.5 times as fast/ | expand

Checks

Context Check Description
jkicinski/tree_selection success Not a local patch

Commit Message

Jonathan Neuschäfer Nov. 7, 2020, 10:08 p.m. UTC
2.5 times faster would be 3.5 Gbps (4.375 Gbaud after 8b/10b encoding).

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 Documentation/networking/phy.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--
2.28.0

Comments

Jakub Kicinski Nov. 10, 2020, 1:30 a.m. UTC | #1
On Sat,  7 Nov 2020 23:08:21 +0100 Jonathan Neuschäfer wrote:
> 2.5 times faster would be 3.5 Gbps (4.375 Gbaud after 8b/10b encoding).
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 256106054c8cb..b2f7ec794bc8b 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -247,8 +247,8 @@  Some of the interface modes are described below:
     speeds (see below.)

 ``PHY_INTERFACE_MODE_2500BASEX``
-    This defines a variant of 1000BASE-X which is clocked 2.5 times faster,
-    than the 802.3 standard giving a fixed bit rate of 3.125Gbaud.
+    This defines a variant of 1000BASE-X which is clocked 2.5 times as fast
+    as the 802.3 standard, giving a fixed bit rate of 3.125Gbaud.

 ``PHY_INTERFACE_MODE_SGMII``
     This is used for Cisco SGMII, which is a modification of 1000BASE-X