diff mbox series

linux-next: build failure after merge of the mhi tree

Message ID 20200928184230.2d973291@canb.auug.org.au
State Not Applicable
Delegated to: David Miller
Headers show
Series linux-next: build failure after merge of the mhi tree | expand

Commit Message

Stephen Rothwell Sept. 28, 2020, 8:42 a.m. UTC
Hi all,

After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
failed like this:

drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
   27 |   .auto_start = false,
      |    ^~~~~~~~~~
drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
   42 |   .auto_start = false,
      |    ^~~~~~~~~~
drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
   57 |   .auto_start = true,
      |    ^~~~~~~~~~
drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
   72 |   .auto_start = true,
      |    ^~~~~~~~~~

Caused by commit

  ed39d7816885 ("bus: mhi: Remove auto-start option")

interacting with commit

  1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")

from the net-next tree.

I applied the following merge fix patch, but maybe more is required.
Even if so, this could be fixed now in the net-next tree.

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 28 Sep 2020 18:39:41 +1000
Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 4 ----
 1 file changed, 4 deletions(-)

Comments

Manivannan Sadhasivam Sept. 28, 2020, 9:10 a.m. UTC | #1
Hi,

On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
> failed like this:
> 
> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    27 |   .auto_start = false,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    42 |   .auto_start = false,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    57 |   .auto_start = true,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    72 |   .auto_start = true,
>       |    ^~~~~~~~~~
> 
> Caused by commit
> 
>   ed39d7816885 ("bus: mhi: Remove auto-start option")
> 
> interacting with commit
> 
>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
> 
> from the net-next tree.
> 
> I applied the following merge fix patch, but maybe more is required.
> Even if so, this could be fixed now in the net-next tree.
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Mon, 28 Sep 2020 18:39:41 +1000
> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Sorry, I forgot to submit a patch against net-next for fixing this while merging
the MHI change.

But your change looks good and I can just modify the subject/description and
resubmit. Or if Dave prefers to fix the original commit itself in net-next,
I'm fine!

Thanks,
Mani

> ---
>  drivers/net/wireless/ath/ath11k/mhi.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
> index aded9a719d51..47a1ce1bee4f 100644
> --- a/drivers/net/wireless/ath/ath11k/mhi.c
> +++ b/drivers/net/wireless/ath/ath11k/mhi.c
> @@ -24,7 +24,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = false,
>  	},
>  	{
>  		.num = 1,
> @@ -39,7 +38,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = false,
>  	},
>  	{
>  		.num = 20,
> @@ -54,7 +52,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = true,
>  	},
>  	{
>  		.num = 21,
> @@ -69,7 +66,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = true,
> -		.auto_start = true,
>  	},
>  };
>  
> -- 
> 2.28.0
> 
> -- 
> Cheers,
> Stephen Rothwell
Stephen Rothwell Sept. 28, 2020, 9:28 a.m. UTC | #2
Hi Manivannan,

On Mon, 28 Sep 2020 14:40:35 +0530 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
>
> But your change looks good and I can just modify the subject/description and
> resubmit. Or if Dave prefers to fix the original commit itself in net-next,
> I'm fine!

Dave never rebase the net-next tree, so a new fix patch is required.
Thanks for taking case of it.
Kalle Valo Sept. 28, 2020, 9:34 a.m. UTC | #3
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:

> On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
>> Hi all,
>> 
>> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
>> failed like this:
>> 
>> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct
>> mhi_channel_config' has no member named 'auto_start'
>>    27 |   .auto_start = false,
>>       |    ^~~~~~~~~~
>> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct
>> mhi_channel_config' has no member named 'auto_start'
>>    42 |   .auto_start = false,
>>       |    ^~~~~~~~~~
>> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct
>> mhi_channel_config' has no member named 'auto_start'
>>    57 |   .auto_start = true,
>>       |    ^~~~~~~~~~
>> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct
>> mhi_channel_config' has no member named 'auto_start'
>>    72 |   .auto_start = true,
>>       |    ^~~~~~~~~~
>> 
>> Caused by commit
>> 
>>   ed39d7816885 ("bus: mhi: Remove auto-start option")
>> 
>> interacting with commit
>> 
>>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
>> 
>> from the net-next tree.
>> 
>> I applied the following merge fix patch, but maybe more is required.
>> Even if so, this could be fixed now in the net-next tree.
>> 
>> From: Stephen Rothwell <sfr@canb.auug.org.au>
>> Date: Mon, 28 Sep 2020 18:39:41 +1000
>> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
>> 
>> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
>
> Sorry, I forgot to submit a patch against net-next for fixing this while merging
> the MHI change.

Try to notify the ath11k list (CCed) whenever changing MHI API so that
we (ath11k folks) can be prepared for any major changes.

> But your change looks good and I can just modify the subject/description and
> resubmit. Or if Dave prefers to fix the original commit itself in net-next,
> I'm fine!

Actually I prefer to apply the fix to my ath.git tree, less conflicts
that way (I have still quite a lot of ath11k patches pending for -next).
I'll then send a pull request to Dave end of this week.

So please submit the patch like a normal ath11k patch documented here:

https://wireless.wiki.kernel.org/en/users/drivers/ath11k/submittingpatches
Manivannan Sadhasivam Sept. 28, 2020, 9:47 a.m. UTC | #4
On Mon, Sep 28, 2020 at 12:34:40PM +0300, Kalle Valo wrote:
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:
> 
> > On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
> >> Hi all,
> >> 
> >> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
> >> failed like this:
> >> 
> >> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct
> >> mhi_channel_config' has no member named 'auto_start'
> >>    27 |   .auto_start = false,
> >>       |    ^~~~~~~~~~
> >> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct
> >> mhi_channel_config' has no member named 'auto_start'
> >>    42 |   .auto_start = false,
> >>       |    ^~~~~~~~~~
> >> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct
> >> mhi_channel_config' has no member named 'auto_start'
> >>    57 |   .auto_start = true,
> >>       |    ^~~~~~~~~~
> >> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct
> >> mhi_channel_config' has no member named 'auto_start'
> >>    72 |   .auto_start = true,
> >>       |    ^~~~~~~~~~
> >> 
> >> Caused by commit
> >> 
> >>   ed39d7816885 ("bus: mhi: Remove auto-start option")
> >> 
> >> interacting with commit
> >> 
> >>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
> >> 
> >> from the net-next tree.
> >> 
> >> I applied the following merge fix patch, but maybe more is required.
> >> Even if so, this could be fixed now in the net-next tree.
> >> 
> >> From: Stephen Rothwell <sfr@canb.auug.org.au>
> >> Date: Mon, 28 Sep 2020 18:39:41 +1000
> >> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
> >> 
> >> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> >
> > Sorry, I forgot to submit a patch against net-next for fixing this while merging
> > the MHI change.
> 
> Try to notify the ath11k list (CCed) whenever changing MHI API so that
> we (ath11k folks) can be prepared for any major changes.
> 

Okay sure, will do!

> > But your change looks good and I can just modify the subject/description and
> > resubmit. Or if Dave prefers to fix the original commit itself in net-next,
> > I'm fine!
> 
> Actually I prefer to apply the fix to my ath.git tree, less conflicts
> that way (I have still quite a lot of ath11k patches pending for -next).
> I'll then send a pull request to Dave end of this week.
> 
> So please submit the patch like a normal ath11k patch documented here:
> 

Okay.

Thanks,
Mani

> https://wireless.wiki.kernel.org/en/users/drivers/ath11k/submittingpatches
> 
> -- 
> https://patchwork.kernel.org/project/linux-wireless/list/
> 
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Kalle Valo Sept. 28, 2020, 4:45 p.m. UTC | #5
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:

> On Mon, Sep 28, 2020 at 12:34:40PM +0300, Kalle Valo wrote:
>> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:
>> 
>> > On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
>> >> Hi all,
>> >> 
>> >> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
>> >> failed like this:
>> >> 
>> >> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct
>> >> mhi_channel_config' has no member named 'auto_start'
>> >>    27 |   .auto_start = false,
>> >>       |    ^~~~~~~~~~
>> >> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct
>> >> mhi_channel_config' has no member named 'auto_start'
>> >>    42 |   .auto_start = false,
>> >>       |    ^~~~~~~~~~
>> >> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct
>> >> mhi_channel_config' has no member named 'auto_start'
>> >>    57 |   .auto_start = true,
>> >>       |    ^~~~~~~~~~
>> >> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct
>> >> mhi_channel_config' has no member named 'auto_start'
>> >>    72 |   .auto_start = true,
>> >>       |    ^~~~~~~~~~
>> >> 
>> >> Caused by commit
>> >> 
>> >>   ed39d7816885 ("bus: mhi: Remove auto-start option")
>> >> 
>> >> interacting with commit
>> >> 
>> >>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
>> >> 
>> >> from the net-next tree.
>> >> 
>> >> I applied the following merge fix patch, but maybe more is required.
>> >> Even if so, this could be fixed now in the net-next tree.
>> >> 
>> >> From: Stephen Rothwell <sfr@canb.auug.org.au>
>> >> Date: Mon, 28 Sep 2020 18:39:41 +1000
>> >> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
>> >> 
>> >> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
>> >
>> > Sorry, I forgot to submit a patch against net-next for fixing this while merging
>> > the MHI change.
>> 
>> Try to notify the ath11k list (CCed) whenever changing MHI API so that
>> we (ath11k folks) can be prepared for any major changes.
>> 
>
> Okay sure, will do!

Thanks. It's important that ath11k is taken into account while making
changes to MHI, otherwise there can easily be regressions.

I was looking at commit ed39d7816885 ("bus: mhi: Remove auto-start
option") and noticed this in the commit log:

    This is really up to the MHI device(channel) driver to manage the state
    of its channels.

So does this mean we have to make changes in ath11k to accomodate this?
I haven't tested linux-next yet.
Manivannan Sadhasivam Sept. 28, 2020, 5:04 p.m. UTC | #6
On Mon, Sep 28, 2020 at 07:45:37PM +0300, Kalle Valo wrote:
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:
> 
> > On Mon, Sep 28, 2020 at 12:34:40PM +0300, Kalle Valo wrote:
> >> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:
> >> 
> >> > On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
> >> >> Hi all,
> >> >> 
> >> >> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
> >> >> failed like this:
> >> >> 
> >> >> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct
> >> >> mhi_channel_config' has no member named 'auto_start'
> >> >>    27 |   .auto_start = false,
> >> >>       |    ^~~~~~~~~~
> >> >> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct
> >> >> mhi_channel_config' has no member named 'auto_start'
> >> >>    42 |   .auto_start = false,
> >> >>       |    ^~~~~~~~~~
> >> >> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct
> >> >> mhi_channel_config' has no member named 'auto_start'
> >> >>    57 |   .auto_start = true,
> >> >>       |    ^~~~~~~~~~
> >> >> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct
> >> >> mhi_channel_config' has no member named 'auto_start'
> >> >>    72 |   .auto_start = true,
> >> >>       |    ^~~~~~~~~~
> >> >> 
> >> >> Caused by commit
> >> >> 
> >> >>   ed39d7816885 ("bus: mhi: Remove auto-start option")
> >> >> 
> >> >> interacting with commit
> >> >> 
> >> >>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
> >> >> 
> >> >> from the net-next tree.
> >> >> 
> >> >> I applied the following merge fix patch, but maybe more is required.
> >> >> Even if so, this could be fixed now in the net-next tree.
> >> >> 
> >> >> From: Stephen Rothwell <sfr@canb.auug.org.au>
> >> >> Date: Mon, 28 Sep 2020 18:39:41 +1000
> >> >> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
> >> >> 
> >> >> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> >> >
> >> > Sorry, I forgot to submit a patch against net-next for fixing this while merging
> >> > the MHI change.
> >> 
> >> Try to notify the ath11k list (CCed) whenever changing MHI API so that
> >> we (ath11k folks) can be prepared for any major changes.
> >> 
> >
> > Okay sure, will do!
> 
> Thanks. It's important that ath11k is taken into account while making
> changes to MHI, otherwise there can easily be regressions.
> 

I completely agree. Actually I thought about holding that patch till next
release and making the ath11k change together but somehow I applied that
patch blindly, my bad :(

> I was looking at commit ed39d7816885 ("bus: mhi: Remove auto-start
> option") and noticed this in the commit log:
> 
>     This is really up to the MHI device(channel) driver to manage the state
>     of its channels.
> 
> So does this mean we have to make changes in ath11k to accomodate this?

Nope. The change is needed in the MHI client driver like qrtr which is already
taken care: https://lkml.org/lkml/2020/9/28/30

Will make sure to include ath11k list for any future API changes.

Thanks,
Mani

> I haven't tested linux-next yet.
> 
> -- 
> https://patchwork.kernel.org/project/linux-wireless/list/
> 
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Kalle Valo Sept. 29, 2020, 6:18 a.m. UTC | #7
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:

>> I was looking at commit ed39d7816885 ("bus: mhi: Remove auto-start
>> option") and noticed this in the commit log:
>> 
>>     This is really up to the MHI device(channel) driver to manage the state
>>     of its channels.
>> 
>> So does this mean we have to make changes in ath11k to accomodate this?
>
> Nope. The change is needed in the MHI client driver like qrtr which is already
> taken care: https://lkml.org/lkml/2020/9/28/30

Ok, that's good.

> Will make sure to include ath11k list for any future API changes.

Thanks!
Manivannan Sadhasivam Sept. 29, 2020, 3:35 p.m. UTC | #8
Hi,

On Mon, Sep 28, 2020 at 06:42:30PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the mhi tree, today's linux-next build (x86_64 allmodconfig)
> failed like this:
> 
> drivers/net/wireless/ath/ath11k/mhi.c:27:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    27 |   .auto_start = false,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:42:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    42 |   .auto_start = false,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:57:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    57 |   .auto_start = true,
>       |    ^~~~~~~~~~
> drivers/net/wireless/ath/ath11k/mhi.c:72:4: error: 'struct mhi_channel_config' has no member named 'auto_start'
>    72 |   .auto_start = true,
>       |    ^~~~~~~~~~
> 
> Caused by commit
> 
>   ed39d7816885 ("bus: mhi: Remove auto-start option")
> 

After having the discussion with Kalle, we decided to drop these offending
patches from mhi-next (reason is net-next will be broken without these patches).
So we'll deal with this in next merge window.

Thanks,
Mani

> interacting with commit
> 
>   1399fb87ea3e ("ath11k: register MHI controller device for QCA6390")
> 
> from the net-next tree.
> 
> I applied the following merge fix patch, but maybe more is required.
> Even if so, this could be fixed now in the net-next tree.
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Mon, 28 Sep 2020 18:39:41 +1000
> Subject: [PATCH] fix up for "ath11k: register MHI controller device for QCA6390"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/net/wireless/ath/ath11k/mhi.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
> index aded9a719d51..47a1ce1bee4f 100644
> --- a/drivers/net/wireless/ath/ath11k/mhi.c
> +++ b/drivers/net/wireless/ath/ath11k/mhi.c
> @@ -24,7 +24,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = false,
>  	},
>  	{
>  		.num = 1,
> @@ -39,7 +38,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = false,
>  	},
>  	{
>  		.num = 20,
> @@ -54,7 +52,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = false,
> -		.auto_start = true,
>  	},
>  	{
>  		.num = 21,
> @@ -69,7 +66,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
>  		.offload_channel = false,
>  		.doorbell_mode_switch = false,
>  		.auto_queue = true,
> -		.auto_start = true,
>  	},
>  };
>  
> -- 
> 2.28.0
> 
> -- 
> Cheers,
> Stephen Rothwell
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index aded9a719d51..47a1ce1bee4f 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -24,7 +24,6 @@  static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 1,
@@ -39,7 +38,6 @@  static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 20,
@@ -54,7 +52,6 @@  static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = true,
 	},
 	{
 		.num = 21,
@@ -69,7 +66,6 @@  static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = true,
-		.auto_start = true,
 	},
 };