From patchwork Sun Sep 20 17:17:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Lunn X-Patchwork-Id: 1367941 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=lunn.ch Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4BvZ596CN0z9sTC for ; Mon, 21 Sep 2020 03:17:33 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726455AbgITRRd (ORCPT ); Sun, 20 Sep 2020 13:17:33 -0400 Received: from vps0.lunn.ch ([185.16.172.187]:46166 "EHLO vps0.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726333AbgITRR2 (ORCPT ); Sun, 20 Sep 2020 13:17:28 -0400 Received: from andrew by vps0.lunn.ch with local (Exim 4.94) (envelope-from ) id 1kK2xi-00FUYk-RD; Sun, 20 Sep 2020 19:17:18 +0200 From: Andrew Lunn To: David Miller Cc: netdev , Florian Fainelli , Heiner Kallweit , Andrew Lunn Subject: [PATCH net-next 4/5] net: phy: Document core PHY structures Date: Sun, 20 Sep 2020 19:17:02 +0200 Message-Id: <20200920171703.3692328-5-andrew@lunn.ch> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200920171703.3692328-1-andrew@lunn.ch> References: <20200920171703.3692328-1-andrew@lunn.ch> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Add kerneldoc for the core PHY data structures, a few inline functions and exported functions which are not already documented. Signed-off-by: Andrew Lunn --- Documentation/networking/kapi.rst | 9 + drivers/net/phy/phy-core.c | 30 +++ drivers/net/phy/phy.c | 69 ++++- include/linux/phy.h | 411 +++++++++++++++++++++--------- 4 files changed, 393 insertions(+), 126 deletions(-) diff --git a/Documentation/networking/kapi.rst b/Documentation/networking/kapi.rst index f03ae64be8bc..d198fa5eaacd 100644 --- a/Documentation/networking/kapi.rst +++ b/Documentation/networking/kapi.rst @@ -134,6 +134,15 @@ PHY Support .. kernel-doc:: drivers/net/phy/phy.c :internal: +.. kernel-doc:: drivers/net/phy/phy-core.c + :export: + +.. kernel-doc:: drivers/net/phy/phy-c45.c + :export: + +.. kernel-doc:: include/linux/phy.h + :internal: + .. kernel-doc:: drivers/net/phy/phy_device.c :export: diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index de5b869139d7..8f40f0c441b2 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -6,6 +6,11 @@ #include #include +/** + * phy_speed_to_str - Return a string representing the PHY link speed + * + * @speed: Speed of the link + */ const char *phy_speed_to_str(int speed) { BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92, @@ -52,6 +57,11 @@ const char *phy_speed_to_str(int speed) } EXPORT_SYMBOL_GPL(phy_speed_to_str); +/** + * phy_duplex_to_str - Return string describing the duplex + * + * @duplex: Duplex setting to describe + */ const char *phy_duplex_to_str(unsigned int duplex) { if (duplex == DUPLEX_HALF) @@ -252,6 +262,16 @@ static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) return __set_linkmode_max_speed(max_speed, phydev->supported); } +/** + * phy_set_max_speed - Set the maximum speed the PHY should support + * + * @phydev: The phy_device struct + * @max_speed: Maximum speed + * + * The PHY might be more capable than the MAC. For example a Fast Ethernet + * is connected to a 1G PHY. This function allows the MAC to indicate its + * maximum speed, and so limit what the PHY will advertise. + */ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) { int err; @@ -308,6 +328,16 @@ void of_set_phy_eee_broken(struct phy_device *phydev) phydev->eee_broken_modes = broken; } +/** + * phy_resolve_aneg_pause - Determine pause autoneg results + * + * @phydev: The phy_device struct + * + * Once autoneg has completed the local pause settings can be + * resolved. Determine if pause and asymmetric pause should be used + * by the MAC. + */ + void phy_resolve_aneg_pause(struct phy_device *phydev) { if (phydev->duplex == DUPLEX_FULL) { diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 735a806045ac..4449f0e9ce9e 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -456,7 +456,16 @@ int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } EXPORT_SYMBOL(phy_do_ioctl); -/* same as phy_do_ioctl, but ensures that net_device is running */ +/** + * phy_do_ioctl_running - generic ndo_do_ioctl implementation but test first + * + * @dev: the net_device struct + * @ifr: &struct ifreq for socket ioctl's + * @cmd: ioctl cmd to execute + * + * Same as phy_do_ioctl, but ensures that net_device is running before + * handling the ioctl. + */ int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd) { if (!netif_running(dev)) @@ -466,6 +475,12 @@ int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd) } EXPORT_SYMBOL(phy_do_ioctl_running); +/** + * phy_queue_state_machine - Trigger the state machine to run soon + * + * @phydev: the phy_device struct + * @jiffies: Run the state machine after these jiffies + */ void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies) { mod_delayed_work(system_power_efficient_wq, &phydev->state_queue, @@ -473,6 +488,11 @@ void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies) } EXPORT_SYMBOL(phy_queue_state_machine); +/** + * phy_queue_state_machine - Trigger the state machine to run now + * + * @phydev: the phy_device struct + */ static void phy_trigger_machine(struct phy_device *phydev) { phy_queue_state_machine(phydev, 0); @@ -489,6 +509,12 @@ static void phy_abort_cable_test(struct phy_device *phydev) phydev_err(phydev, "Error while aborting cable test"); } +/** + * phy_ethtool_get_strings - Get the statistic counter names + * + * @phydev: the phy_device struct + * @data: Where to put the strings + */ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data) { if (!phydev->drv) @@ -502,6 +528,11 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data) } EXPORT_SYMBOL(phy_ethtool_get_strings); +/** + * phy_ethtool_get_sset_count - Get the number of statistic counters + * + * @phydev: the phy_device struct + */ int phy_ethtool_get_sset_count(struct phy_device *phydev) { int ret; @@ -523,6 +554,13 @@ int phy_ethtool_get_sset_count(struct phy_device *phydev) } EXPORT_SYMBOL(phy_ethtool_get_sset_count); +/** + * phy_ethtool_get_stats - Get the statistic counters + * + * @phydev: the phy_device struct + * @stats: What counters to get + * @data: Where to store the counters + */ int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data) { @@ -537,6 +575,12 @@ int phy_ethtool_get_stats(struct phy_device *phydev, } EXPORT_SYMBOL(phy_ethtool_get_stats); +/** + * phy_start_cable_test - Start a cable test + * + * @phydev: the phy_device struct + * @extack: extack for reporting useful error messages + */ int phy_start_cable_test(struct phy_device *phydev, struct netlink_ext_ack *extack) { @@ -600,6 +644,13 @@ int phy_start_cable_test(struct phy_device *phydev, } EXPORT_SYMBOL(phy_start_cable_test); +/** + * phy_start_cable_test_tdr - Start a raw TDR cable test + * + * @phydev: the phy_device struct + * @extack: extack for reporting useful error messages + * @config: Configuration of the test to run + */ int phy_start_cable_test_tdr(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config) @@ -1363,6 +1414,12 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) } EXPORT_SYMBOL(phy_ethtool_set_eee); +/** + * phy_ethtool_set_wol - Configure Wake On LAN + * + * @phydev: target phy_device struct + * @wol: Configuration requested + */ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { if (phydev->drv && phydev->drv->set_wol) @@ -1372,6 +1429,12 @@ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) } EXPORT_SYMBOL(phy_ethtool_set_wol); +/** + * phy_ethtool_get_wol - Get the current Wake On LAN configuration + * + * @phydev: target phy_device struct + * @wol: Store the current configuration here + */ void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { if (phydev->drv && phydev->drv->get_wol) @@ -1405,6 +1468,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev, } EXPORT_SYMBOL(phy_ethtool_set_link_ksettings); +/** + * phy_ethtool_nway_reset - Restart auto negotiation + * @ndev: Network device to restart autoneg for + */ int phy_ethtool_nway_reset(struct net_device *ndev) { struct phy_device *phydev = ndev->phydev; diff --git a/include/linux/phy.h b/include/linux/phy.h index 4901b2637059..2adbca0e42e3 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -82,7 +82,39 @@ extern const int phy_10gbit_features_array[1]; #define PHY_POLL_CABLE_TEST 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 -/* Interface Mode definitions */ +/** + * enum phy_interface_t - Interface Mode definitions + * + * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch + * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined + * @PHY_INTERFACE_MODE_MII: Median-independent interface + * @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface + * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface + * @PHY_INTERFACE_MODE_TBI: ??? + * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface + * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface + * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface + * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay + * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay + * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay + * @PHY_INTERFACE_MODE_RTBI: Reduced TBI + * @PHY_INTERFACE_MODE_SMII: ??? MII + * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface + * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface + * @PHY_INTERFACE_MODE_MOCA: Multimetia over Coax + * @PHY_INTERFACE_MODE_QSGMII: ??? MII + * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII + * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX + * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX + * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI + * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface + * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR + * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII + * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN + * @PHY_INTERFACE_MODE_MAX: Book keeping + * + * Describes the interface between the MAC and PHY. + */ typedef enum { PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_INTERNAL, @@ -134,7 +166,7 @@ unsigned int phy_supported_speeds(struct phy_device *phy, * phy_modes - map phy_interface_t enum to device tree binding of phy-mode * @interface: enum phy_interface_t value * - * Description: maps 'enum phy_interface_t' defined in this file + * Description: maps enum &phy_interface_t defined in this file * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get phy interface from device tree. */ @@ -215,6 +247,14 @@ struct sfp_bus; struct sfp_upstream_ops; struct sk_buff; +/** + * struct mdio_bus_stats - Statistics counters for MDIO busses + * @transfers: Total number of transfers, i.e. @writes + @reads + * @errors: Number of MDIO transfers that returned an error + * @writes: Number of write transfers + * @reads: Number of read transfers + * @syncp: Synchronization for incrimenting statistics + */ struct mdio_bus_stats { u64_stats_t transfers; u64_stats_t errors; @@ -224,7 +264,15 @@ struct mdio_bus_stats { struct u64_stats_sync syncp; }; -/* Represents a shared structure between different phydev's in the same +/** + * struct phy_package_shared - Shared information in PHY packages + * @addr: Common PHY address used to combine PHYs in one package + * @refcnt: Number of PHYs connected to this shared data + * @flags: Initialization of PHY package + * @priv_size: Size of the shared private data @priv + * @priv: Driver private data shared across a PHY package + * + * Represents a shared structure between different phydev's in the same * package, for example a quad PHY. See phy_package_join() and * phy_package_leave(). */ @@ -247,7 +295,14 @@ struct phy_package_shared { #define PHY_SHARED_F_INIT_DONE 0 #define PHY_SHARED_F_PROBE_DONE 1 -/* +/** + * struct mii_bus - Represents an MDIO bus + * + * @owner: Who owns this device + * @name: User friendly name for this MDIO device, or driver name + * @id: Identifer for this bus, typical from bus hierarchy + * @priv: Driver private data + * * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure */ @@ -256,49 +311,58 @@ struct mii_bus { const char *name; char id[MII_BUS_ID_SIZE]; void *priv; + /** @read: Perform a read transfer on the bus */ int (*read)(struct mii_bus *bus, int addr, int regnum); + /** @write: Perform a write transfer on the bus */ int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); + /** @reset: Perform a reset of the bus */ int (*reset)(struct mii_bus *bus); + + /** @stats: Statistic counters per device on the bus */ struct mdio_bus_stats stats[PHY_MAX_ADDR]; - /* - * A lock to ensure that only one thing can read/write + /** + * @mdio_lock: A lock to ensure that only one thing can read/write * the MDIO bus at a time */ struct mutex mdio_lock; + /** @parent: Parent device of this bus */ struct device *parent; + /** @state: State of bus structure */ enum { MDIOBUS_ALLOCATED = 1, MDIOBUS_REGISTERED, MDIOBUS_UNREGISTERED, MDIOBUS_RELEASED, } state; + + /** @dev: Kernel device representation */ struct device dev; - /* list of all PHYs on bus */ + /** @mdio_map: list of all PHYs on bus */ struct mdio_device *mdio_map[PHY_MAX_ADDR]; - /* PHY addresses to be ignored when probing */ + /** @phy_mask: PHY addresses to be ignored when probing */ u32 phy_mask; - /* PHY addresses to ignore the TA/read failure */ + /** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ u32 phy_ignore_ta_mask; - /* - * An array of interrupts, each PHY's interrupt at the index + /** + * @irq: An array of interrupts, each PHY's interrupt at the index * matching its address */ int irq[PHY_MAX_ADDR]; - /* GPIO reset pulse width in microseconds */ + /** @reset_delay_us: GPIO reset pulse width in microseconds */ int reset_delay_us; - /* GPIO reset deassert delay in microseconds */ + /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ int reset_post_delay_us; - /* RESET GPIO descriptor pointer */ + /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; - /* bus capabilities, used for probing */ + /** @probe_capabilities: bus capabilities, used for probing */ enum { MDIOBUS_NO_CAP = 0, MDIOBUS_C22, @@ -306,15 +370,22 @@ struct mii_bus { MDIOBUS_C22_C45, } probe_capabilities; - /* protect access to the shared element */ + /** @shared_lock: protect access to the shared element */ struct mutex shared_lock; - /* shared state across different PHYs */ + /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -struct mii_bus *mdiobus_alloc_size(size_t); +struct mii_bus *mdiobus_alloc_size(size_t size); + +/** + * mdiobus_alloc - Allocate an MDIO bus structure + * + * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready + * for the driver to register the bus. + */ static inline struct mii_bus *mdiobus_alloc(void) { return mdiobus_alloc_size(0); @@ -341,40 +412,41 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED false #define PHY_INTERRUPT_ENABLED true -/* PHY state machine states: +/** + * enum phy_state - PHY state machine states: * - * DOWN: PHY device and driver are not ready for anything. probe + * @PHY_DOWN: PHY device and driver are not ready for anything. probe * should be called if and only if the PHY is in this state, * given that the PHY device exists. - * - PHY driver probe function will set the state to READY + * - PHY driver probe function will set the state to @PHY_READY * - * READY: PHY is ready to send and receive packets, but the + * @PHY_READY: PHY is ready to send and receive packets, but the * controller is not. By default, PHYs which do not implement * probe will be set to this state by phy_probe(). * - start will set the state to UP * - * UP: The PHY and attached device are ready to do work. + * @PHY_UP: The PHY and attached device are ready to do work. * Interrupts should be started here. - * - timer moves to NOLINK or RUNNING + * - timer moves to @PHY_NOLINK or @PHY_RUNNING * - * NOLINK: PHY is up, but not currently plugged in. - * - irq or timer will set RUNNING if link comes back - * - phy_stop moves to HALTED + * @PHY_NOLINK: PHY is up, but not currently plugged in. + * - irq or timer will set @PHY_RUNNING if link comes back + * - phy_stop moves to @PHY_HALTED * - * RUNNING: PHY is currently up, running, and possibly sending + * @PHY_RUNNING: PHY is currently up, running, and possibly sending * and/or receiving packets - * - irq or timer will set NOLINK if link goes down - * - phy_stop moves to HALTED + * - irq or timer will set @PHY_NOLINK if link goes down + * - phy_stop moves to @PHY_HALTED * - * CABLETEST: PHY is performing a cable test. Packet reception/sending + * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending * is not expected to work, carrier will be indicated as down. PHY will be * poll once per second, or on interrupt for it current state. * Once complete, move to UP to restart the PHY. - * - phy_stop aborts the running test and moves to HALTED + * - phy_stop aborts the running test and moves to @PHY_HALTED * - * HALTED: PHY is up, but no polling or interrupts are done. Or + * @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or * PHY is in an error state. - * - phy_start moves to UP + * - phy_start moves to @PHY_UP */ enum phy_state { PHY_DOWN = 0, @@ -403,34 +475,67 @@ struct phy_c45_device_ids { struct macsec_context; struct macsec_ops; -/* phy_device: An instance of a PHY +/** + * struct phy_device - An instance of a PHY * - * drv: Pointer to the driver for this PHY instance - * phy_id: UID for this device found during discovery - * c45_ids: 802.3-c45 Device Identifers if is_c45. - * is_c45: Set to true if this phy uses clause 45 addressing. - * is_internal: Set to true if this phy is internal to a MAC. - * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. - * is_gigabit_capable: Set to true if PHY supports 1000Mbps - * has_fixups: Set to true if this phy has fixups/quirks. - * suspended: Set to true if this phy has been suspended successfully. - * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. - * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. - * loopback_enabled: Set true if this phy has been loopbacked successfully. - * downshifted_rate: Set true if link speed has been downshifted. - * state: state of the PHY for management purposes - * dev_flags: Device-specific flags used by the PHY driver. - * irq: IRQ number of the PHY's interrupt (-1 if none) - * phy_timer: The timer for handling the state machine - * sfp_bus_attached: flag indicating whether the SFP bus has been attached - * sfp_bus: SFP bus attached to this PHY's fiber port - * attached_dev: The attached enet driver's device instance ptr - * adjust_link: Callback for the enet controller to respond to - * changes in the link state. - * macsec_ops: MACsec offloading ops. + * @mdio: MDIO bus this PHY is on + * @drv: Pointer to the driver for this PHY instance + * @phy_id: UID for this device found during discovery + * @c45_ids: 802.3-c45 Device Identifers if is_c45. + * @is_c45: Set to true if this phy uses clause 45 addressing. + * @is_internal: Set to true if this phy is internal to a MAC. + * @is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. + * @is_gigabit_capable: Set to true if PHY supports 1000Mbps + * @has_fixups: Set to true if this phy has fixups/quirks. + * @suspended: Set to true if this phy has been suspended successfully. + * @suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. + * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. + * @loopback_enabled: Set true if this phy has been loopbacked successfully. + * @downshifted_rate: Set true if link speed has been downshifted. + * @state: State of the PHY for management purposes + * @dev_flags: Device-specific flags used by the PHY driver. + * @irq: IRQ number of the PHY's interrupt (-1 if none) + * @phy_timer: The timer for handling the state machine + * @phylink: Pointer to phylink instance for this PHY + * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached + * @sfp_bus: SFP bus attached to this PHY's fiber port + * @attached_dev: The attached enet driver's device instance ptr + * @adjust_link: Callback for the enet controller to respond to changes: in the + * link state. + * @phy_link_change: Callback for phylink for notification of link change + * @macsec_ops: MACsec offloading ops. * - * speed, duplex, pause, supported, advertising, lp_advertising, - * and autoneg are used like in mii_if_info + * @speed: Current link speed + * @duplex: Current duplex + * @pause: Current pause + * @asym_pause: Current asymmetric pause + * @supported: Combined MAC/PHY supported linkmodes + * @advertising: Currently advertised linkmodes + * @adv_old: Saved advertised while power saving for WoL + * @lp_advertising: Current link partner advertised linkmodes + * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited + * @autoneg: Flag autoneg being used + * @link: Current link state + * @autoneg_complete: Flag auto negotiation of the link has completed + * @mdix: Current crossover + * @mdix_ctrl: User setting of crossover + * @interrupts: Flag interrupts have been enabled + * @interface: mii, rmii, rgmii etc. + * @skb: Netlink message for cable diagnostics + * @nest: Netlink nest used for cable diagnostics + * @ehdr: nNtlink header for cable diagnostics + * @phy_led_triggers: Array of LED triggers + * @phy_num_led_triggers: Number of triggers in @phy_led_triggers + * @led_link_trigger: LED trigger for link up/down + * @last_triggered: last LED trigger for link speed + * @master_slave_set: User requested master/slave configuration + * @master_slave_get: Current master/slave advertisement + * @master_slave_state: Current master/slave configuration + * @mii_ts: Pointer to time stamper callbacks + * @lock: Mutex for serialization access to PHY + * @state_queue: Work queue for state machine + * @shared: Pointer to private data shared by phys in one package + * @priv: Pointer to driver private data * * interrupts currently only supports enabled or disabled, * but could be changed in the future to support enabling @@ -550,9 +655,18 @@ struct phy_device { #define to_phy_device(d) container_of(to_mdio_device(d), \ struct phy_device, mdio) -/* A structure containing possible configuration parameters +/** + * struct phy_tdr_config - Configuration of a TDR raw test + * + * @first: Distance for first data collection point + * @last: Distance for last data collection point + * @step: Step between data collection points + * @pair: Bitmap of cable pairs to collect data for + * + * A structure containing possible configuration parameters * for a TDR cable test. The driver does not need to implement * all the parameters, but should report what is actually used. + * All distances are in centimeters. */ struct phy_tdr_config { u32 first; @@ -562,18 +676,20 @@ struct phy_tdr_config { }; #define PHY_PAIR_ALL -1 -/* struct phy_driver: Driver structure for a particular PHY type +/** + * struct phy_driver - Driver structure for a particular PHY type * - * driver_data: static driver data - * phy_id: The result of reading the UID registers of this PHY + * @mdiodrv: Data common to all MDIO devices + * @phy_id: The result of reading the UID registers of this PHY * type, and ANDing them with the phy_id_mask. This driver * only works for PHYs with IDs which match this field - * name: The friendly name of this PHY type - * phy_id_mask: Defines the important bits of the phy_id - * features: A mandatory list of features (speed, duplex, etc) + * @name: The friendly name of this PHY type + * @phy_id_mask: Defines the important bits of the phy_id + * @features: A mandatory list of features (speed, duplex, etc) * supported by this PHY - * flags: A bitfield defining certain other features this PHY + * @flags: A bitfield defining certain other features this PHY * supports (like interrupts) + * @driver_data: Static driver data * * All functions are optional. If config_aneg or read_status * are not implemented, the phy core uses the genphy versions. @@ -592,151 +708,178 @@ struct phy_driver { u32 flags; const void *driver_data; - /* - * Called to issue a PHY software reset + /** + * @soft_reset: Called to issue a PHY software reset */ int (*soft_reset)(struct phy_device *phydev); - /* - * Called to initialize the PHY, + /** + * @config_init: Called to initialize the PHY, * including after a reset */ int (*config_init)(struct phy_device *phydev); - /* - * Called during discovery. Used to set + /** + * @probe: Called during discovery. Used to set * up device-specific structures, if any */ int (*probe)(struct phy_device *phydev); - /* - * Probe the hardware to determine what abilities it has. - * Should only set phydev->supported. + /** + * @get_features: Probe the hardware to determine what + * abilities it has. Should only set phydev->supported. */ int (*get_features)(struct phy_device *phydev); /* PHY Power Management */ + /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); + /** @resume: Resume the hardware, restoring state if needed */ int (*resume)(struct phy_device *phydev); - /* - * Configures the advertisement and resets + /** + * @config_aneg: Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev * if phydev->autoneg is off */ int (*config_aneg)(struct phy_device *phydev); - /* Determines the auto negotiation result */ + /** @aneg_done: Determines the auto negotiation result */ int (*aneg_done)(struct phy_device *phydev); - /* Determines the negotiated speed and duplex */ + /** @read_status: Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); - /* Clears any pending interrupts */ + /** @ack_interrupt: Clears any pending interrupts */ int (*ack_interrupt)(struct phy_device *phydev); - /* Enables or disables interrupts */ + /** @config_intr: Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); - /* - * Checks if the PHY generated an interrupt. + /** + * @did_interrupt: Checks if the PHY generated an interrupt. * For multi-PHY devices with shared PHY interrupt pin * Set interrupt bits have to be cleared. */ int (*did_interrupt)(struct phy_device *phydev); - /* Override default interrupt handling */ + /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); - /* Clears up any memory if needed */ + /** @remove: Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); - /* Returns true if this is a suitable driver for the given - * phydev. If NULL, matching is based on phy_id and - * phy_id_mask. + /** + * @match_phy_device: Returns true if this is a suitable + * driver for the given phydev. If NULL, matching is based on + * phy_id and phy_id_mask. */ int (*match_phy_device)(struct phy_device *phydev); - /* Some devices (e.g. qnap TS-119P II) require PHY register changes to - * enable Wake on LAN, so set_wol is provided to be called in the - * ethernet driver's set_wol function. */ + /** + * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY + * register changes to enable Wake on LAN, so set_wol is + * provided to be called in the ethernet driver's set_wol + * function. + */ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); - /* See set_wol, but for checking whether Wake on LAN is enabled. */ + /** + * @get_wol: See set_wol, but for checking whether Wake on LAN + * is enabled. + */ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); - /* - * Called to inform a PHY device driver when the core is about to - * change the link state. This callback is supposed to be used as - * fixup hook for drivers that need to take action when the link - * state changes. Drivers are by no means allowed to mess with the + /** + * @link_change_notify: Called to inform a PHY device driver + * when the core is about to change the link state. This + * callback is supposed to be used as fixup hook for drivers + * that need to take action when the link state + * changes. Drivers are by no means allowed to mess with the * PHY device structure in their implementations. */ void (*link_change_notify)(struct phy_device *dev); - /* - * Phy specific driver override for reading a MMD register. - * This function is optional for PHY specific drivers. When - * not provided, the default MMD read function will be used - * by phy_read_mmd(), which will use either a direct read for - * Clause 45 PHYs or an indirect read for Clause 22 PHYs. - * devnum is the MMD device number within the PHY device, - * regnum is the register within the selected MMD device. + /** + * @read_mmd: Phy specific driver override for reading a MMD + * register. This function is optional for PHY specific + * drivers. When not provided, the default MMD read function + * will be used by phy_read_mmd(), which will use either a + * direct read for Clause 45 PHYs or an indirect read for + * Clause 22 PHYs. devnum is the MMD device number within the + * PHY device, regnum is the register within the selected MMD + * device. */ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); - /* - * Phy specific driver override for writing a MMD register. - * This function is optional for PHY specific drivers. When - * not provided, the default MMD write function will be used - * by phy_write_mmd(), which will use either a direct write for - * Clause 45 PHYs, or an indirect write for Clause 22 PHYs. - * devnum is the MMD device number within the PHY device, - * regnum is the register within the selected MMD device. - * val is the value to be written. + /** + * @write_mmd: Phy specific driver override for writing a MMD + * register. This function is optional for PHY specific + * drivers. When not provided, the default MMD write function + * will be used by phy_write_mmd(), which will use either a + * direct write for Clause 45 PHYs, or an indirect write for + * Clause 22 PHYs. devnum is the MMD device number within the + * PHY device, regnum is the register within the selected MMD + * device. val is the value to be written. */ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, u16 val); + /** @read_page: Return the current PHY register page number */ int (*read_page)(struct phy_device *dev); + /** @write_page: Set the current PHY register page number */ int (*write_page)(struct phy_device *dev, int page); - /* Get the size and type of the eeprom contained within a plug-in - * module */ + /** + * @module_info: Get the size and type of the eeprom contained + * within a plug-in module + */ int (*module_info)(struct phy_device *dev, struct ethtool_modinfo *modinfo); - /* Get the eeprom information from the plug-in module */ + /** + * @module_eeprom: Get the eeprom information from the plug-in + * module + */ int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data); - /* Start a cable test */ + /** @cable_test_start: Start a cable test */ int (*cable_test_start)(struct phy_device *dev); - /* Start a raw TDR cable test */ + /** @cable_test_tdr_start: Start a raw TDR cable test */ int (*cable_test_tdr_start)(struct phy_device *dev, const struct phy_tdr_config *config); - /* Once per second, or on interrupt, request the status of the - * test. + /** + * @cable_test_get_status: Once per second, or on interrupt, + * request the status of the test. */ int (*cable_test_get_status)(struct phy_device *dev, bool *finished); /* Get statistics from the phy using ethtool */ + /** @get_sset_count: Number of statistic counters */ int (*get_sset_count)(struct phy_device *dev); + /** @get_strings: Names of the statistic counters */ void (*get_strings)(struct phy_device *dev, u8 *data); + /** @get_stats: Return the statistic counter values */ void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); /* Get and Set PHY tunables */ + /** @get_tunable: Return the value of a tunable */ int (*get_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, void *data); + /** @set_tunable: Set the value of a tunable */ int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); + /** @set_loopback: Set the loopback mood of the PHY */ int (*set_loopback)(struct phy_device *dev, bool enable); + /** @get_sqi: Get the signal quality indication */ int (*get_sqi)(struct phy_device *dev); + /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ @@ -890,6 +1033,24 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); +/** + * phy_read_mmd_poll_timeout - Periodically poll a phy register until a + * condition is met or a timeout occurs + * + * @phydev: The phy_device struct + * @devaddr: The MMD to read from + * @regnum: The register on the MMD to read + * @val: Variable to read the register into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 + * tight-loops). Should be less than ~20ms since usleep_range + * is used (see Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * @sleep_before_read: if it is true, sleep @sleep_us before read. + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + */ #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ @@ -1161,7 +1322,7 @@ static inline bool phy_is_internal(struct phy_device *phydev) /** * phy_interface_mode_is_rgmii - Convenience function for testing if a * PHY interface mode is RGMII (all variants) - * @mode: the phy_interface_t enum + * @mode: the &phy_interface_t enum */ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) { @@ -1193,7 +1354,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) return phy_interface_mode_is_rgmii(phydev->interface); }; -/* +/** * phy_is_pseudo_fixed_link - Convenience function for testing if this * PHY is the CPU port facing side of an Ethernet switch, or similar. * @phydev: the phy_device struct