diff mbox series

[net-next,06/14] ice: Reset VF for all port VLAN changes from host

Message ID 20200531123619.2887469-7-jeffrey.t.kirsher@intel.com
State Accepted
Delegated to: David Miller
Headers show
Series 100GbE Intel Wired LAN Driver Updates 2020-05-31 | expand

Commit Message

Kirsher, Jeffrey T May 31, 2020, 12:36 p.m. UTC 
From: Brett Creeley <brett.creeley@intel.com>

Currently the PF is modifying the VF's port VLAN on the fly when
configured via iproute. This is okay for most cases, but if the VF
already has guest VLANs configured the PF has to remove all of those
filters so only VLAN tagged traffic that matches the port VLAN will
pass. Instead of adding functionality to track which guest VLANs have
been added, just reset the VF each time port VLAN parameters are
modified.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 42 +++----------------
 1 file changed, 5 insertions(+), 37 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 9550501f9279..2916cfb9d032 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -3295,7 +3295,6 @@  ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		     __be16 vlan_proto)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
-	struct ice_vsi *vsi;
 	struct device *dev;
 	struct ice_vf *vf;
 	u16 vlanprio;
@@ -3317,8 +3316,6 @@  ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 	}
 
 	vf = &pf->vf[vf_id];
-	vsi = pf->vsi[vf->lan_vsi_idx];
-
 	ret = ice_check_vf_ready_for_cfg(vf);
 	if (ret)
 		return ret;
@@ -3331,44 +3328,15 @@  ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		return 0;
 	}
 
-	if (vlan_id || qos) {
-		/* remove VLAN 0 filter set by default when transitioning from
-		 * no port VLAN to a port VLAN. No change to old port VLAN on
-		 * failure.
-		 */
-		ret = ice_vsi_kill_vlan(vsi, 0);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, vlanprio, true);
-		if (ret)
-			return ret;
-	} else {
-		/* add VLAN 0 filter back when transitioning from port VLAN to
-		 * no port VLAN. No change to old port VLAN on failure.
-		 */
-		ret = ice_vsi_add_vlan(vsi, 0, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, 0, false);
-		if (ret)
-			return ret;
-	}
+	vf->port_vlan_info = vlanprio;
 
-	if (vlan_id) {
+	if (vf->port_vlan_info)
 		dev_info(dev, "Setting VLAN %d, QoS 0x%x on VF %d\n",
 			 vlan_id, qos, vf_id);
+	else
+		dev_info(dev, "Clearing port VLAN on VF %d\n", vf_id);
 
-		/* add VLAN filter for the port VLAN */
-		ret = ice_vsi_add_vlan(vsi, vlan_id, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-	}
-	/* remove old port VLAN filter with valid VLAN ID or QoS fields */
-	if (vf->port_vlan_info)
-		ice_vsi_kill_vlan(vsi, vf->port_vlan_info & VLAN_VID_MASK);
-
-	/* keep port VLAN information persistent on resets */
-	vf->port_vlan_info = le16_to_cpu(vsi->info.pvid);
+	ice_vc_reset_vf(vf);
 
 	return 0;
 }