diff mbox series

[v3,net-next,6/7] net : phy: marvell: Speedup TDR data retrieval by only changing page once

Message ID 20200526222143.793613-7-andrew@lunn.ch
State Accepted
Delegated to: David Miller
Headers show
Series Raw PHY TDR data | expand

Commit Message

Andrew Lunn May 26, 2020, 10:21 p.m. UTC 
Getting the TDR data requires a large number of MDIO bus
transactions. The number can however be reduced if the page is only
changed once. Add the needed locking to allow this, and make use of
unlocked read/write methods where needed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/marvell.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 335e51d6f138..e9deedea5f19 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1751,15 +1751,12 @@  static int marvell_vct5_wait_complete(struct phy_device *phydev)
 	int val;
 
 	for (i = 0; i < 32; i++) {
-		val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE,
-				     MII_VCT5_CTRL);
+		val = __phy_read(phydev, MII_VCT5_CTRL);
 		if (val < 0)
 			return val;
 
 		if (val & MII_VCT5_CTRL_COMPLETE)
 			return 0;
-
-		usleep_range(1000, 2000);
 	}
 
 	phydev_err(phydev, "Timeout while waiting for cable test to finish\n");
@@ -1773,7 +1770,7 @@  static int marvell_vct5_amplitude(struct phy_device *phydev, int pair)
 	int reg;
 
 	reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair;
-	val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE, reg);
+	val = __phy_read(phydev, reg);
 
 	if (val < 0)
 		return 0;
@@ -1805,9 +1802,8 @@  static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
 	int mV;
 	int i;
 
-	err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
-			      MII_VCT5_SAMPLE_POINT_DISTANCE,
-			      distance);
+	err = __phy_write(phydev, MII_VCT5_SAMPLE_POINT_DISTANCE,
+			  distance);
 	if (err)
 		return err;
 
@@ -1816,8 +1812,7 @@  static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
 		MII_VCT5_CTRL_SAMPLES_DEFAULT |
 		MII_VCT5_CTRL_SAMPLE_POINT |
 		MII_VCT5_CTRL_PEEK_HYST_DEFAULT;
-	err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
-			      MII_VCT5_CTRL, reg);
+	err = __phy_write(phydev, MII_VCT5_CTRL, reg);
 	if (err)
 		return err;
 
@@ -1840,6 +1835,7 @@  static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
 {
 	struct marvell_priv *priv = phydev->priv;
 	int distance;
+	int page;
 	int err;
 	u16 reg;
 
@@ -1853,16 +1849,27 @@  static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
 	if (err)
 		return err;
 
+	/* Reading the TDR data is very MDIO heavy. We need to optimize
+	 * access to keep the time to a minimum. So lock the bus once,
+	 * and don't release it until complete. We can then avoid having
+	 * to change the page for every access, greatly speeding things
+	 * up.
+	 */
+	page = phy_select_page(phydev, MII_MARVELL_VCT5_PAGE);
+	if (page < 0)
+		return page;
+
 	for (distance = priv->first;
 	     distance <= priv->last;
 	     distance += priv->step) {
 		err = marvell_vct5_amplitude_distance(phydev, distance,
 						      priv->pair);
 		if (err)
-			return err;
+			goto restore_page;
 	}
 
-	return 0;
+restore_page:
+	return phy_restore_page(phydev, page, err);
 }
 
 static int marvell_cable_test_start_common(struct phy_device *phydev)