diff mbox series

[net-next,08/14] igc: Fix overwrites when dumping registers

Message ID 20200417184251.1962762-9-jeffrey.t.kirsher@intel.com
State Accepted
Delegated to: David Miller
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2020-04-17 | expand

Commit Message

Kirsher, Jeffrey T April 17, 2020, 6:42 p.m. UTC 
From: Andre Guedes <andre.guedes@intel.com>

This patch fixes some register overwriting when dumping registers via
ethtool.

We have a total of 16 RAL registers, starting at offset 139. So RAH
offset should be 139 + 16 = 155, not 145. As result some RAL registers
are overwritten. Likewise, RAH registers are also overwritten by TDBAL,
TDBAH, TDLEN, and TDH registers.

To fix this bug while preserving the ABI, this patch re-writes RAL and
RAH registers at the end of 'regs_buff' and bumps regs->version. It also
removes some pointless comments in the middle of igc_set_regs().

Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index f530fc29b074..ff2a40496e4e 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -153,7 +153,7 @@  static void igc_get_regs(struct net_device *netdev,
 
 	memset(p, 0, IGC_REGS_LEN * sizeof(u32));
 
-	regs->version = (1u << 24) | (hw->revision_id << 16) | hw->device_id;
+	regs->version = (2u << 24) | (hw->revision_id << 16) | hw->device_id;
 
 	/* General Registers */
 	regs_buff[0] = rd32(IGC_CTRL);
@@ -306,6 +306,15 @@  static void igc_get_regs(struct net_device *netdev,
 		regs_buff[164 + i] = rd32(IGC_TDT(i));
 	for (i = 0; i < 4; i++)
 		regs_buff[168 + i] = rd32(IGC_TXDCTL(i));
+
+	/* XXX: Due to a bug few lines above, RAL and RAH registers are
+	 * overwritten. To preserve the ABI, we write these registers again in
+	 * regs_buff.
+	 */
+	for (i = 0; i < 16; i++)
+		regs_buff[172 + i] = rd32(IGC_RAL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[188 + i] = rd32(IGC_RAH(i));
 }
 
 static void igc_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)