@@ -42,6 +42,7 @@
#define MII_MARVELL_FIBER_PAGE 0x01
#define MII_MARVELL_MSCR_PAGE 0x02
#define MII_MARVELL_LED_PAGE 0x03
+#define MII_MARVELL_VCT5_PAGE 0x05
#define MII_MARVELL_MISC_TEST_PAGE 0x06
#define MII_MARVELL_VCT7_PAGE 0x07
#define MII_MARVELL_WOL_PAGE 0x11
@@ -158,6 +159,46 @@
#define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */
#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
+#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10
+#define MII_VCT5_TX_RX_MDI1_COUPLING 0x11
+#define MII_VCT5_TX_RX_MDI2_COUPLING 0x12
+#define MII_VCT5_TX_RX_MDI3_COUPLING 0x13
+#define MII_VCT5_TX_RX_AMPLITUDE_MASK 0x7f00
+#define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8
+#define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION BIT(15)
+
+#define MII_VCT5_CTRL 0x17
+#define MII_VCT5_CTRL_ENABLE BIT(15)
+#define MII_VCT5_CTRL_COMPLETE BIT(14)
+#define MII_VCT5_CTRL_SAME_CHANNEL (0 << 11)
+#define MII_VCT5_CTRL_TX0_CHANNEL (1 << 11)
+#define MII_VCT5_CTRL_TX1_CHANNEL (2 << 11)
+#define MII_VCT5_CTRL_TX2_CHANNEL (3 << 11)
+#define MII_VCT5_CTRL_TX3_CHANNEL (4 << 11)
+#define MII_VCT5_CTRL_SAMPLES_2 (0 << 8)
+#define MII_VCT5_CTRL_SAMPLES_4 (1 << 8)
+#define MII_VCT5_CTRL_SAMPLES_8 (2 << 8)
+#define MII_VCT5_CTRL_SAMPLES_16 (3 << 8)
+#define MII_VCT5_CTRL_SAMPLES_32 (4 << 8)
+#define MII_VCT5_CTRL_SAMPLES_64 (5 << 8)
+#define MII_VCT5_CTRL_SAMPLES_126 (5 << 8)
+#define MII_VCT5_CTRL_SAMPLES_DEFAULT (6 << 8)
+#define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK (0 << 6)
+#define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK (1 << 6)
+#define MII_VCT5_CTRL_MODE_OFFSET (2 << 6)
+#define MII_VCT5_CTRL_SAMPLE_POINT (3 << 6)
+#define MII_VCT5_CTRL_PEEK_HYST_DEFAULT 3
+
+#define MII_VCT5_SAMPLE_POINT_DISTANCE 0x18
+#define MII_VCT5_TX_PULSE_CTRL 0x1c
+#define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN BIT(12)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS (0 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS (1 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS (2 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS (3 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_MAX_AMP BIT(7)
+#define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV (6 << 0)
+
#define MII_VCT7_PAIR_0_DISTANCE 0x10
#define MII_VCT7_PAIR_1_DISTANCE 0x11
#define MII_VCT7_PAIR_2_DISTANCE 0x12
@@ -224,6 +265,7 @@ struct marvell_priv {
u64 stats[ARRAY_SIZE(marvell_hw_stats)];
char *hwmon_name;
struct device *hwmon_dev;
+ int cable_test_options;
};
static int marvell_read_page(struct phy_device *phydev)
@@ -1667,14 +1709,131 @@ static void marvell_get_stats(struct phy_device *phydev,
data[i] = marvell_get_stat(phydev, i);
}
+static int marvell_vct5_wait_complete(struct phy_device *phydev)
+{
+ int i;
+ u16 val;
+
+ for (i = 0; i < 32; i++) {
+ val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_CTRL);
+ if (val < 0)
+ return val;
+
+ if (val & MII_VCT5_CTRL_COMPLETE)
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+
+ phydev_err(phydev, "Timeout while waiting for cable test to finish\n");
+ return -ETIMEDOUT;
+}
+
+static int marvell_vct5_amplitude(struct phy_device *phydev, int pair)
+{
+ int amplitude;
+ int val;
+ int reg;
+
+ reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair;
+ val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE, reg);
+
+ if (val < 0)
+ return 0;
+
+ amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >>
+ MII_VCT5_TX_RX_AMPLITUDE_SHIFT;
+
+ if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION))
+ amplitude = -amplitude;
+
+ return 1000 * amplitude / 128;
+}
+
+static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
+ int distance)
+{
+ int mV_pair0, mV_pair1, mV_pair2, mV_pair3;
+ u16 reg;
+ int err;
+
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_SAMPLE_POINT_DISTANCE,
+ distance);
+ if (err)
+ return err;
+
+ reg = MII_VCT5_CTRL_ENABLE |
+ MII_VCT5_CTRL_SAME_CHANNEL |
+ MII_VCT5_CTRL_SAMPLES_DEFAULT |
+ MII_VCT5_CTRL_SAMPLE_POINT |
+ MII_VCT5_CTRL_PEEK_HYST_DEFAULT;
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_CTRL, reg);
+ if (err)
+ return err;
+
+ err = marvell_vct5_wait_complete(phydev);
+ if (err)
+ return err;
+
+ mV_pair0 = marvell_vct5_amplitude(phydev, 0);
+ mV_pair1 = marvell_vct5_amplitude(phydev, 1);
+ mV_pair2 = marvell_vct5_amplitude(phydev, 2);
+ mV_pair3 = marvell_vct5_amplitude(phydev, 3);
+
+ phy_cable_test_amplitude(phydev, distance, ETHTOOL_A_CABLE_PAIR_0,
+ mV_pair0);
+ phy_cable_test_amplitude(phydev, distance, ETHTOOL_A_CABLE_PAIR_1,
+ mV_pair1);
+ phy_cable_test_amplitude(phydev, distance, ETHTOOL_A_CABLE_PAIR_2,
+ mV_pair2);
+ phy_cable_test_amplitude(phydev, distance, ETHTOOL_A_CABLE_PAIR_3,
+ mV_pair3);
+
+ return 0;
+}
+
+static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
+{
+ int distance;
+ int err;
+ u16 reg;
+
+ /* Disable VCT7 */
+ err = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
+ MII_VCT7_CTRL, 0);
+
+ /* Allow the cable time to become idle */
+ msleep(1500);
+
+ reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV |
+ MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN |
+ MII_VCT5_TX_PULSE_CTRL_MAX_AMP |
+ MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS;
+
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_TX_PULSE_CTRL, reg);
+ if (err)
+ return err;
+
+ for (distance = 0; distance <= 100; distance++) {
+ err = marvell_vct5_amplitude_distance(phydev, distance);
+ if (err)
+ return err;
+ }
+
+ /* 1000 mV pulse is used */
+ return phy_cable_test_pulse(phydev, 1000);
+}
+
static int marvell_vct7_cable_test_start(struct phy_device *phydev,
int options)
{
+ struct marvell_priv *priv = phydev->priv;
int bmcr, bmsr, ret;
- if (options)
- return -EOPNOTSUPP;
-
/* If auto-negotiation is enabled, but not complete, the
cable test never completes. So disable auto-neg.
*/
@@ -1697,6 +1856,12 @@ static int marvell_vct7_cable_test_start(struct phy_device *phydev,
return ret;
}
+ priv->cable_test_options = options;
+
+ if (options & PHY_CABLE_TEST_AMPLITUDE_GRAPH) {
+ return 0;
+ }
+
return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
MII_VCT7_CTRL,
MII_VCT7_CTRL_RUN_NOW |
@@ -1806,8 +1971,15 @@ static int marvell_vct7_cable_test_report(struct phy_device *phydev)
static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
bool *finished)
{
+ struct marvell_priv *priv = phydev->priv;
int ret;
+ if (priv->cable_test_options & PHY_CABLE_TEST_AMPLITUDE_GRAPH) {
+ ret = marvell_vct5_amplitude_graph(phydev);
+ *finished = true;
+ return ret;
+ }
+
*finished = false;
ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
The Marvell PHYs can measure the amplitude of the returned signal for a given distance. Implement this option of the cable test infrastructure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/marvell.c | 178 +++++++++++++++++++++++++++++++++++++- 1 file changed, 175 insertions(+), 3 deletions(-)