@@ -5,6 +5,7 @@
*/
#include <linux/if_arp.h>
+#include <linux/kthread.h>
#include <linux/mhi.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
@@ -16,6 +17,11 @@
#define MHI_NET_MAX_MTU 0xffff
#define MHI_NET_DEFAULT_MTU 0x4000
+static unsigned int rx_refill_level = 70;
+module_param(rx_refill_level, uint, 0600);
+MODULE_PARM_DESC(rx_refill_level,
+ "The minimal RX queue level percentage (0 to 100) under which the RX queue must be refilled");
+
struct mhi_net_stats {
u64_stats_t rx_packets;
u64_stats_t rx_bytes;
@@ -25,7 +31,6 @@ struct mhi_net_stats {
u64_stats_t tx_bytes;
u64_stats_t tx_errors;
u64_stats_t tx_dropped;
- atomic_t rx_queued;
struct u64_stats_sync tx_syncp;
struct u64_stats_sync rx_syncp;
};
@@ -33,17 +38,66 @@ struct mhi_net_stats {
struct mhi_net_dev {
struct mhi_device *mdev;
struct net_device *ndev;
- struct delayed_work rx_refill;
+ struct task_struct *refill_task;
+ wait_queue_head_t refill_wq;
struct mhi_net_stats stats;
u32 rx_queue_sz;
+ u32 rx_refill_level;
};
+static int mhi_net_refill_thread(void *data)
+{
+ struct mhi_net_dev *mhi_netdev = data;
+ struct net_device *ndev = mhi_netdev->ndev;
+ struct mhi_device *mdev = mhi_netdev->mdev;
+ int size = READ_ONCE(ndev->mtu);
+ struct sk_buff *skb;
+ int err;
+
+ while (1) {
+ err = wait_event_interruptible(mhi_netdev->refill_wq,
+ !mhi_queue_is_full(mdev, DMA_FROM_DEVICE)
+ || kthread_should_stop());
+ if (err || kthread_should_stop())
+ break;
+
+ skb = netdev_alloc_skb(ndev, size);
+ if (unlikely(!skb)) {
+ /* No memory, retry later */
+ schedule_timeout_interruptible(msecs_to_jiffies(250));
+ continue;
+ }
+
+ err = mhi_queue_skb(mdev, DMA_FROM_DEVICE, skb, size, MHI_EOT);
+ if (unlikely(err)) {
+ net_err_ratelimited("%s: Failed to queue RX buf (%d)\n",
+ ndev->name, err);
+ kfree_skb(skb);
+ break;
+ }
+
+ /* Do not hog the CPU */
+ cond_resched();
+ }
+
+ return 0;
+}
+
static int mhi_ndo_open(struct net_device *ndev)
{
struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+ unsigned int qsz = mhi_netdev->rx_queue_sz;
- /* Feed the rx buffer pool */
- schedule_delayed_work(&mhi_netdev->rx_refill, 0);
+ if (rx_refill_level >= 100)
+ mhi_netdev->rx_refill_level = 1;
+ else
+ mhi_netdev->rx_refill_level = qsz - qsz * rx_refill_level / 100;
+
+ mhi_netdev->refill_task = kthread_run(mhi_net_refill_thread, mhi_netdev,
+ "mhi-net-rx");
+ if (IS_ERR(mhi_netdev->refill_task)) {
+ return PTR_ERR(mhi_netdev->refill_task);
+ }
/* Carrier is established via out-of-band channel (e.g. qmi) */
netif_carrier_on(ndev);
@@ -57,9 +111,9 @@ static int mhi_ndo_stop(struct net_device *ndev)
{
struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+ kthread_stop(mhi_netdev->refill_task);
netif_stop_queue(ndev);
netif_carrier_off(ndev);
- cancel_delayed_work_sync(&mhi_netdev->rx_refill);
return 0;
}
@@ -138,9 +192,6 @@ static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
{
struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
struct sk_buff *skb = mhi_res->buf_addr;
- int remaining;
-
- remaining = atomic_dec_return(&mhi_netdev->stats.rx_queued);
if (unlikely(mhi_res->transaction_status)) {
dev_kfree_skb_any(skb);
@@ -163,9 +214,8 @@ static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
netif_rx(skb);
}
- /* Refill if RX buffers queue becomes low */
- if (remaining <= mhi_netdev->rx_queue_sz / 2)
- schedule_delayed_work(&mhi_netdev->rx_refill, 0);
+ if (mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE) >= mhi_netdev->rx_refill_level)
+ wake_up_interruptible(&mhi_netdev->refill_wq);
}
static void mhi_net_ul_callback(struct mhi_device *mhi_dev,
@@ -200,42 +250,6 @@ static void mhi_net_ul_callback(struct mhi_device *mhi_dev,
netif_wake_queue(ndev);
}
-static void mhi_net_rx_refill_work(struct work_struct *work)
-{
- struct mhi_net_dev *mhi_netdev = container_of(work, struct mhi_net_dev,
- rx_refill.work);
- struct net_device *ndev = mhi_netdev->ndev;
- struct mhi_device *mdev = mhi_netdev->mdev;
- int size = READ_ONCE(ndev->mtu);
- struct sk_buff *skb;
- int err;
-
- while (atomic_read(&mhi_netdev->stats.rx_queued) < mhi_netdev->rx_queue_sz) {
- skb = netdev_alloc_skb(ndev, size);
- if (unlikely(!skb))
- break;
-
- err = mhi_queue_skb(mdev, DMA_FROM_DEVICE, skb, size, MHI_EOT);
- if (unlikely(err)) {
- net_err_ratelimited("%s: Failed to queue RX buf (%d)\n",
- ndev->name, err);
- kfree_skb(skb);
- break;
- }
-
- atomic_inc(&mhi_netdev->stats.rx_queued);
-
- /* Do not hog the CPU if rx buffers are consumed faster than
- * queued (unlikely).
- */
- cond_resched();
- }
-
- /* If we're still starved of rx buffers, reschedule later */
- if (unlikely(!atomic_read(&mhi_netdev->stats.rx_queued)))
- schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2);
-}
-
static int mhi_net_probe(struct mhi_device *mhi_dev,
const struct mhi_device_id *id)
{
@@ -256,7 +270,7 @@ static int mhi_net_probe(struct mhi_device *mhi_dev,
mhi_netdev->mdev = mhi_dev;
SET_NETDEV_DEV(ndev, &mhi_dev->dev);
- INIT_DELAYED_WORK(&mhi_netdev->rx_refill, mhi_net_rx_refill_work);
+ init_waitqueue_head(&mhi_netdev->refill_wq);
u64_stats_init(&mhi_netdev->stats.rx_syncp);
u64_stats_init(&mhi_netdev->stats.tx_syncp);
The buffer allocation for RX path is currently done by a work executed in the system workqueue. The work to do is quite simple and consists mostly in allocating and queueing as much as possible buffers to the MHI RX channel. It appears that using a dedicated kthread would be more appropriate to prevent 1. RX allocation latency introduced by the system queue 2. Unbounded work execution, the work only returning when queue is full, it can possibly monopolise the workqueue thread on slower systems. This patch replaces the system work with a simple kthread that loops on buffer allocation and sleeps when queue is full. Moreover it gets rid of the local rx_queued variable (to track buffer count), and instead, relies on the new mhi_get_free_desc_count helper. After pratical testing on a x86_64 machine, this change improves - Peek throughput (slightly, by few mbps) - Throughput stability when concurrent loads are running (stress) - CPU usage, less CPU cycles dedicated to the task Below is the powertop output for RX allocation task before and after this change, when performing UDP download at 6Gbps. Mostly to highlight the improvement in term of CPU usage. older (system workqueue): Usage Events/s Category Description 63,2 ms/s 134,0 kWork mhi_net_rx_refill_work 62,8 ms/s 134,3 kWork mhi_net_rx_refill_work 60,8 ms/s 141,4 kWork mhi_net_rx_refill_work newer (dedicated kthread): Usage Events/s Category Description 20,7 ms/s 155,6 Process [PID 3360] [mhi-net-rx] 22,2 ms/s 169,6 Process [PID 3360] [mhi-net-rx] 22,3 ms/s 150,2 Process [PID 3360] [mhi-net-rx] Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- v2: add module parameter for changing RX refill level drivers/net/mhi_net.c | 110 ++++++++++++++++++++++++++++---------------------- 1 file changed, 62 insertions(+), 48 deletions(-)