diff mbox series

[net] net: stmmac: fix ethtool flow control not able to get/set

Message ID 1558414542-28550-1-git-send-email-weifeng.voon@intel.com
State Accepted
Delegated to: David Miller
Headers show
Series [net] net: stmmac: fix ethtool flow control not able to get/set | expand

Commit Message

Voon, Weifeng May 21, 2019, 4:55 a.m. UTC 
From: "Tan, Tee Min" <tee.min.tan@intel.com>

Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.

This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.

Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>

Comments

Andrew Lunn May 20, 2019, 9:20 p.m. UTC | #1 
On Tue, May 21, 2019 at 12:55:42PM +0800, Weifeng Voon wrote:
> From: "Tan, Tee Min" <tee.min.tan@intel.com>
> 
> Currently ethtool was not able to get/set the flow control due to a
> missing "!". It will always return -EOPNOTSUPP even the device is
> flow control supported.
> 
> This patch fixes the condition check for ethtool flow control get/set
> function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.
> 
> Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
> Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>

Upps,  my bad. Sorry.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
David Miller May 21, 2019, 12:55 a.m. UTC | #2 
From: Weifeng Voon <weifeng.voon@intel.com>
Date: Tue, 21 May 2019 12:55:42 +0800

> From: "Tan, Tee Min" <tee.min.tan@intel.com>
> 
> Currently ethtool was not able to get/set the flow control due to a
> missing "!". It will always return -EOPNOTSUPP even the device is
> flow control supported.
> 
> This patch fixes the condition check for ethtool flow control get/set
> function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.
> 
> Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
> Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>

Applied and queued up for -stable.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 3c749c3..e09522c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -460,7 +460,7 @@  static void stmmac_ethtool_gregs(struct net_device *dev,
 	} else {
 		if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 				       netdev->phydev->supported) ||
-		    linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+		    !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
 				      netdev->phydev->supported))
 			return;
 	}
@@ -491,7 +491,7 @@  static void stmmac_ethtool_gregs(struct net_device *dev,
 	} else {
 		if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 				       phy->supported) ||
-		    linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+		    !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
 				      phy->supported))
 			return -EOPNOTSUPP;
 	}