Message ID | 1551412644-17319-2-git-send-email-Tristram.Ha@microchip.com |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | net: dsa: microchip: add KSZ9893 switch support | expand |
On 2/28/2019 7:57 PM, Tristram.Ha@microchip.com wrote: > From: Tristram Ha <Tristram.Ha@microchip.com> > > Document additional Microchip KSZ9477 family switches. > > Show how KSZ8565 switch should be configured as the host port is port 7 > instead of port 5. OK, so port 7, if you start numbering the ports from 1, and port@6 to match the hardware... a bit confusing, but I can work with that. > > Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 8d58c2a..e7db726 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -7,6 +7,11 @@ Required properties: of the following: - "microchip,ksz9477" - "microchip,ksz9897" + - "microchip,ksz9896" + - "microchip,ksz9567" + - "microchip,ksz8565" + - "microchip,ksz9893" + - "microchip,ksz9563" Optional properties: @@ -73,4 +78,42 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: }; }; }; + ksz8565: ksz8565@0 { + compatible = "microchip,ksz8565"; + reg = <0>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; };