diff mbox series

[net-next,5/5] net: phy: Add support for resolving 5G and 2.5G autoneg

Message ID 1541889817-2295-6-git-send-email-andrew@lunn.ch
State Accepted, archived
Delegated to: David Miller
Headers show
Series net: phy: convert advertise and supported to linkmode | expand

Commit Message

Andrew Lunn Nov. 10, 2018, 10:43 p.m. UTC 
Now that 2.5G and 5G can be represented in phydev->advertising and
phydev->lp_advertising, add these two links modes as possible
resolutions to auto negotiation.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-core.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 6d274cdc2796..20fbd5eb56fd 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -359,6 +359,14 @@  void phy_resolve_aneg_linkmode(struct phy_device *phydev)
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, common)) {
 		phydev->speed = SPEED_10000;
 		phydev->duplex = DUPLEX_FULL;
+	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+				     common)) {
+		phydev->speed = SPEED_5000;
+		phydev->duplex = DUPLEX_FULL;
+	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				     common)) {
+		phydev->speed = SPEED_2500;
+		phydev->duplex = DUPLEX_FULL;
 	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
 				     common)) {
 		phydev->speed = SPEED_1000;