@@ -1471,20 +1471,20 @@ static void bond_setup_by_slave(struct net_device *bond_dev,
* ARP on active-backup slaves with arp_validate enabled.
*/
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
- struct net_device *slave_dev,
- struct net_device *bond_dev)
+ struct slave *slave,
+ struct bonding *bond)
{
- if (slave_dev->priv_flags & IFF_SLAVE_INACTIVE) {
- if (slave_dev->priv_flags & IFF_SLAVE_NEEDARP &&
+ if (slave->dev->priv_flags & IFF_SLAVE_INACTIVE) {
+ if (slave_do_arp_validate(bond, slave) &&
skb->protocol == __cpu_to_be16(ETH_P_ARP))
return false;
- if (bond_dev->priv_flags & IFF_MASTER_ALB &&
+ if (bond->params.mode == BOND_MODE_ALB &&
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
return false;
- if (bond_dev->priv_flags & IFF_MASTER_8023AD &&
+ if (bond->params.mode == BOND_MODE_8023AD &&
skb->protocol == __cpu_to_be16(ETH_P_SLOW))
return false;
@@ -1497,6 +1497,7 @@ static struct sk_buff *bond_handle_frame(struct sk_buff *skb)
{
struct slave *slave;
struct net_device *bond_dev;
+ struct bonding *bond;
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
@@ -1507,17 +1508,19 @@ static struct sk_buff *bond_handle_frame(struct sk_buff *skb)
if (unlikely(!bond_dev))
return skb;
- if (bond_dev->priv_flags & IFF_MASTER_ARPMON)
+ bond = netdev_priv(bond_dev);
+
+ if (bond->params.arp_interval)
slave->dev->last_rx = jiffies;
- if (bond_should_deliver_exact_match(skb, slave->dev, bond_dev)) {
+ if (bond_should_deliver_exact_match(skb, slave, bond)) {
skb->deliver_no_wcard = 1;
return skb;
}
skb->dev = bond_dev;
- if (bond_dev->priv_flags & IFF_MASTER_ALB &&
+ if (bond->params.mode == BOND_MODE_ALB &&
bond_dev->priv_flags & IFF_BRIDGE_PORT &&
skb->pkt_type == PACKET_HOST) {
u16 *dest = (u16 *) eth_hdr(skb)->h_dest;
@@ -2128,9 +2131,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
dev_set_mtu(slave_dev, slave->original_mtu);
- slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
- IFF_SLAVE_INACTIVE | IFF_BONDING |
- IFF_SLAVE_NEEDARP);
+ slave_dev->priv_flags &= ~(IFF_SLAVE_INACTIVE | IFF_BONDING);
kfree(slave);
@@ -2241,8 +2242,7 @@ static int bond_release_all(struct net_device *bond_dev)
dev_set_mac_address(slave_dev, &addr);
}
- slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
- IFF_SLAVE_INACTIVE);
+ slave_dev->priv_flags &= ~IFF_SLAVE_INACTIVE;
kfree(slave);
@@ -4718,11 +4718,9 @@ void bond_set_mode_ops(struct bonding *bond, int mode)
case BOND_MODE_BROADCAST:
break;
case BOND_MODE_8023AD:
- bond_set_master_3ad_flags(bond);
bond_set_xmit_hash_policy(bond);
break;
case BOND_MODE_ALB:
- bond_set_master_alb_flags(bond);
/* FALLTHRU */
case BOND_MODE_TLB:
break;
@@ -4813,9 +4811,6 @@ static void bond_setup(struct net_device *bond_dev)
bond_dev->priv_flags |= IFF_BONDING;
bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
- if (bond->params.arp_interval)
- bond_dev->priv_flags |= IFF_MASTER_ARPMON;
-
/* At first, we block adding VLANs. That's the only way to
* prevent problems that occur when adding VLANs over an
* empty bond. The block will be removed once non-challenged
@@ -322,11 +322,6 @@ static ssize_t bonding_store_mode(struct device *d,
ret = -EINVAL;
goto out;
}
- if (bond->params.mode == BOND_MODE_8023AD)
- bond_unset_master_3ad_flags(bond);
-
- if (bond->params.mode == BOND_MODE_ALB)
- bond_unset_master_alb_flags(bond);
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
@@ -527,8 +522,6 @@ static ssize_t bonding_store_arp_interval(struct device *d,
pr_info("%s: Setting ARP monitoring interval to %d.\n",
bond->dev->name, new_value);
bond->params.arp_interval = new_value;
- if (bond->params.arp_interval)
- bond->dev->priv_flags |= IFF_MASTER_ARPMON;
if (bond->params.miimon) {
pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
bond->dev->name, bond->dev->name);
@@ -1004,7 +997,6 @@ static ssize_t bonding_store_miimon(struct device *d,
pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
bond->dev->name);
bond->params.arp_interval = 0;
- bond->dev->priv_flags &= ~IFF_MASTER_ARPMON;
if (bond->params.arp_validate) {
bond_unregister_arp(bond);
bond->params.arp_validate =
@@ -354,34 +354,12 @@ static inline void bond_set_slave_inactive_flags(struct slave *slave)
slave->state = BOND_STATE_BACKUP;
if (!bond->params.all_slaves_active)
slave->dev->priv_flags |= IFF_SLAVE_INACTIVE;
- if (slave_do_arp_validate(bond, slave))
- slave->dev->priv_flags |= IFF_SLAVE_NEEDARP;
}
static inline void bond_set_slave_active_flags(struct slave *slave)
{
slave->state = BOND_STATE_ACTIVE;
- slave->dev->priv_flags &= ~(IFF_SLAVE_INACTIVE | IFF_SLAVE_NEEDARP);
-}
-
-static inline void bond_set_master_3ad_flags(struct bonding *bond)
-{
- bond->dev->priv_flags |= IFF_MASTER_8023AD;
-}
-
-static inline void bond_unset_master_3ad_flags(struct bonding *bond)
-{
- bond->dev->priv_flags &= ~IFF_MASTER_8023AD;
-}
-
-static inline void bond_set_master_alb_flags(struct bonding *bond)
-{
- bond->dev->priv_flags |= IFF_MASTER_ALB;
-}
-
-static inline void bond_unset_master_alb_flags(struct bonding *bond)
-{
- bond->dev->priv_flags &= ~IFF_MASTER_ALB;
+ slave->dev->priv_flags &= ~IFF_SLAVE_INACTIVE;
}
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
@@ -60,21 +60,17 @@
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
-#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
-#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
-#define IFF_BONDING 0x20 /* bonding master or slave */
-#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
-#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
-#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
-#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
-#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
+#define IFF_BONDING 0x8 /* bonding master or slave */
+#define IFF_ISATAP 0x10 /* ISATAP interface (RFC4214) */
+#define IFF_WAN_HDLC 0x20 /* WAN HDLC device */
+#define IFF_XMIT_DST_RELEASE 0x40 /* dev_hard_start_xmit() is allowed to
* release skb->dst
*/
-#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
-#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */
-#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */
-#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */
-#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch
+#define IFF_DONT_BRIDGE 0x80 /* disallow bridging this ether dev */
+#define IFF_DISABLE_NETPOLL 0x100 /* disable netpoll at run-time */
+#define IFF_MACVLAN_PORT 0x200 /* device used as macvlan port */
+#define IFF_BRIDGE_PORT 0x400 /* device used as bridge port */
+#define IFF_OVS_DATAPATH 0x800 /* device used as Open vSwitch
* datapath port */
#define IF_GET_IFACE 0x0001 /* for querying only */
Signed-off-by: Jiri Pirko <jpirko@redhat.com> --- drivers/net/bonding/bond_main.c | 33 ++++++++++++++------------------- drivers/net/bonding/bond_sysfs.c | 8 -------- drivers/net/bonding/bonding.h | 24 +----------------------- include/linux/if.h | 22 +++++++++------------- 4 files changed, 24 insertions(+), 63 deletions(-)