@@ -21,6 +21,7 @@
*******************************************************************************/
#define DRV_MODULE_VERSION "Oct_09"
+#include <linux/stmmac.h>
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define STMMAC_VLAN_TAG_USED
@@ -69,6 +70,7 @@ struct stmmac_priv {
int phy_mask;
int (*phy_reset) (void *priv);
void (*fix_mac_speed) (void *priv, unsigned int speed);
+ void (*bus_setup)(unsigned long ioaddr);
void *bsp_priv;
int phy_irq;
@@ -93,6 +95,28 @@ struct stmmac_priv {
#endif
};
+#ifdef CONFIG_STM_DRIVERS
+#include <linux/stm/pad.h>
+static inline int stmmac_claim_resource(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct plat_stmmacenet_data *plat_dat = pdev->dev.platform_data;
+
+ /* Pad routing setup */
+ if (IS_ERR(devm_stm_pad_claim(&pdev->dev, plat_dat->pad_config,
+ dev_name(&pdev->dev)))) {
+ printk(KERN_ERR "%s: Failed to request pads!\n", __func__);
+ ret = -ENODEV;
+ }
+ return ret;
+}
+#else
+static inline int stmmac_claim_resource(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
extern int stmmac_mdio_unregister(struct net_device *ndev);
extern int stmmac_mdio_register(struct net_device *ndev);
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
@@ -45,7 +45,6 @@
#include <linux/phy.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
-#include <linux/stm/soc.h>
#include "stmmac.h"
#define STMMAC_RESOURCE_NAME "stmmaceth"
@@ -1798,8 +1797,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
static int stmmacphy_dvr_probe(struct platform_device *pdev)
{
- struct plat_stmmacphy_data *plat_dat;
- plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+ struct plat_stmmacphy_data *plat_dat = pdev->dev.platform_data;
pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
plat_dat->bus_id);
@@ -1831,9 +1829,7 @@ static struct platform_driver stmmacphy_driver = {
static int stmmac_associate_phy(struct device *dev, void *data)
{
struct stmmac_priv *priv = (struct stmmac_priv *)data;
- struct plat_stmmacphy_data *plat_dat;
-
- plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+ struct plat_stmmacphy_data *plat_dat = dev->platform_data;
DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
plat_dat->bus_id);
@@ -1923,7 +1919,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
priv = netdev_priv(ndev);
priv->device = &(pdev->dev);
priv->dev = ndev;
- plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+ plat_dat = pdev->dev.platform_data;
priv->bus_id = plat_dat->bus_id;
priv->pbl = plat_dat->pbl; /* TLI */
priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
@@ -1933,6 +1929,11 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
/* Set the I/O base addr */
ndev->base_addr = (unsigned long)addr;
+ /* Verify embedded resource for the platform */
+ ret = stmmac_claim_resource(pdev);
+ if (ret < 0)
+ goto out;
+
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
@@ -1953,6 +1954,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
}
priv->fix_mac_speed = plat_dat->fix_mac_speed;
+ priv->bus_setup = plat_dat->bus_setup;
priv->bsp_priv = plat_dat->bsp_priv;
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
This patch rewiews and reorganises all the data come from the platform removing any dependency from the stm code. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> --- drivers/net/stmmac/stmmac.h | 24 ++++++++++++++++++++++++ drivers/net/stmmac/stmmac_main.c | 16 +++++++++------- 2 files changed, 33 insertions(+), 7 deletions(-)