Message ID | 1238780473.19305.3.camel@localhost.localdomain |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
On Friday 03 April 2009, Ed Swierk wrote: > On Fri, 2009-04-03 at 08:24 -0700, Ed Swierk wrote: > > On Fri, Mar 27, 2009 at 1:09 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > I was able to reproduce the problem and identify the commit that broke the > > > resume of forcedeth, which turned out to be: > > > > > > commit cb52deba12f27af90a46d2f8667a64888118a888 > > > Author: Ed Swierk <eswierk@arastra.com> > > > Date: Mon Dec 1 12:24:43 2008 +0000 > > > > > > forcedeth: power down phy when interface is down > > > > > > Signed-off-by: Ed Swierk <eswierk@arastra.com> > > > Tested-by: Arthur Jones <ajones@riverbed.com> > > > Signed-off-by: Andrew Morton <akpm@linux-foundation.org> > > > Signed-off-by: David S. Miller <davem@davemloft.net> > > > > > > Since I have no slightest idea of what this commit is supposed to achieve, > > > I can only ask for reverting it. It reverts cleanly, BTW. > > > > The change causes forcedeth to bring down the physical link when an > > interface goes down; leaving it up causes the switch at the other end > > to think the port is still active, with potentially random speed and > > duplex parameters. > > > > It's possible that the forcedeth driver needs to reset autonegotiation > > after bringing it up the link again. > > > > Can you please try this on a 2.6.29 kernel that's exhibiting the > > symptoms you describe, after resuming the machine from hibernation: > > > > ethtool -s eth1 autoneg off speed 100 duplex full > > ethtool -s eth1 autoneg on > > > > This should reset autonegotiation manually and bring the link. Let me > > know how it goes. > > Also please try this patch; it fixes the problem on my test system (a > DFI board with an nVidia MCP55). > > Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> > -- > --- linux-2.6.29.x86_64/drivers/net/forcedeth.c.orig 2009-03-23 16:12:14.000000000 -0700 > +++ linux-2.6.29.x86_64/drivers/net/forcedeth.c 2009-04-03 10:11:26.839614710 -0700 > @@ -5995,6 +5995,9 @@ > for (i = 0;i <= np->register_size/sizeof(u32); i++) > writel(np->saved_config_space[i], base+i*sizeof(u32)); > > + /* restore phy state, including autoneg */ > + phy_init(dev); > + > netif_device_attach(dev); > if (netif_running(dev)) { > rc = nv_open(dev); Tvrtko, can you test it, please? I'll be away from my NVidia box during the next couple of days. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 03 April 2009 18:41:12 Ed Swierk wrote: > On Fri, 2009-04-03 at 08:24 -0700, Ed Swierk wrote: > > On Fri, Mar 27, 2009 at 1:09 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > I was able to reproduce the problem and identify the commit that broke > > > the resume of forcedeth, which turned out to be: > > > > > > commit cb52deba12f27af90a46d2f8667a64888118a888 > > > Author: Ed Swierk <eswierk@arastra.com> > > > Date: Mon Dec 1 12:24:43 2008 +0000 > > > > > > forcedeth: power down phy when interface is down > > > > > > Signed-off-by: Ed Swierk <eswierk@arastra.com> > > > Tested-by: Arthur Jones <ajones@riverbed.com> > > > Signed-off-by: Andrew Morton <akpm@linux-foundation.org> > > > Signed-off-by: David S. Miller <davem@davemloft.net> > > > > > > Since I have no slightest idea of what this commit is supposed to > > > achieve, I can only ask for reverting it. It reverts cleanly, BTW. > > > > The change causes forcedeth to bring down the physical link when an > > interface goes down; leaving it up causes the switch at the other end > > to think the port is still active, with potentially random speed and > > duplex parameters. > > > > It's possible that the forcedeth driver needs to reset autonegotiation > > after bringing it up the link again. > > > > Can you please try this on a 2.6.29 kernel that's exhibiting the > > symptoms you describe, after resuming the machine from hibernation: > > > > ethtool -s eth1 autoneg off speed 100 duplex full > > ethtool -s eth1 autoneg on > > > > This should reset autonegotiation manually and bring the link. Let me > > know how it goes. > > Also please try this patch; it fixes the problem on my test system (a > DFI board with an nVidia MCP55). > > Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> > -- > --- linux-2.6.29.x86_64/drivers/net/forcedeth.c.orig 2009-03-23 > 16:12:14.000000000 -0700 +++ > linux-2.6.29.x86_64/drivers/net/forcedeth.c 2009-04-03 10:11:26.839614710 > -0700 @@ -5995,6 +5995,9 @@ > for (i = 0;i <= np->register_size/sizeof(u32); i++) > writel(np->saved_config_space[i], base+i*sizeof(u32)); > > + /* restore phy state, including autoneg */ > + phy_init(dev); > + > netif_device_attach(dev); > if (netif_running(dev)) { > rc = nv_open(dev); Works for me on MCP73 as well. Although NIC LED is still on after hibernation - seems to go off shortly before power off and then comes back on. Could be firmware issue I guess, this motherboard has always gulped power when off. Tvrtko -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 04 April 2009, Tvrtko A. Ursulin wrote: > On Friday 03 April 2009 18:41:12 Ed Swierk wrote: > > On Fri, 2009-04-03 at 08:24 -0700, Ed Swierk wrote: > > > On Fri, Mar 27, 2009 at 1:09 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > > I was able to reproduce the problem and identify the commit that broke > > > > the resume of forcedeth, which turned out to be: > > > > > > > > commit cb52deba12f27af90a46d2f8667a64888118a888 > > > > Author: Ed Swierk <eswierk@arastra.com> > > > > Date: Mon Dec 1 12:24:43 2008 +0000 > > > > > > > > forcedeth: power down phy when interface is down > > > > > > > > Signed-off-by: Ed Swierk <eswierk@arastra.com> > > > > Tested-by: Arthur Jones <ajones@riverbed.com> > > > > Signed-off-by: Andrew Morton <akpm@linux-foundation.org> > > > > Signed-off-by: David S. Miller <davem@davemloft.net> > > > > > > > > Since I have no slightest idea of what this commit is supposed to > > > > achieve, I can only ask for reverting it. It reverts cleanly, BTW. > > > > > > The change causes forcedeth to bring down the physical link when an > > > interface goes down; leaving it up causes the switch at the other end > > > to think the port is still active, with potentially random speed and > > > duplex parameters. > > > > > > It's possible that the forcedeth driver needs to reset autonegotiation > > > after bringing it up the link again. > > > > > > Can you please try this on a 2.6.29 kernel that's exhibiting the > > > symptoms you describe, after resuming the machine from hibernation: > > > > > > ethtool -s eth1 autoneg off speed 100 duplex full > > > ethtool -s eth1 autoneg on > > > > > > This should reset autonegotiation manually and bring the link. Let me > > > know how it goes. > > > > Also please try this patch; it fixes the problem on my test system (a > > DFI board with an nVidia MCP55). > > > > Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> > > -- > > --- linux-2.6.29.x86_64/drivers/net/forcedeth.c.orig 2009-03-23 > > 16:12:14.000000000 -0700 +++ > > linux-2.6.29.x86_64/drivers/net/forcedeth.c 2009-04-03 10:11:26.839614710 > > -0700 @@ -5995,6 +5995,9 @@ > > for (i = 0;i <= np->register_size/sizeof(u32); i++) > > writel(np->saved_config_space[i], base+i*sizeof(u32)); > > > > + /* restore phy state, including autoneg */ > > + phy_init(dev); > > + > > netif_device_attach(dev); > > if (netif_running(dev)) { > > rc = nv_open(dev); > > Works for me on MCP73 as well. Great, thanks for testing. I think the patch should go to Linus ASAP and to -stable as a regression fix. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- linux-2.6.29.x86_64/drivers/net/forcedeth.c.orig 2009-03-23 16:12:14.000000000 -0700 +++ linux-2.6.29.x86_64/drivers/net/forcedeth.c 2009-04-03 10:11:26.839614710 -0700 @@ -5995,6 +5995,9 @@ for (i = 0;i <= np->register_size/sizeof(u32); i++) writel(np->saved_config_space[i], base+i*sizeof(u32)); + /* restore phy state, including autoneg */ + phy_init(dev); + netif_device_attach(dev); if (netif_running(dev)) { rc = nv_open(dev);