diff mbox series

[net-next,02/15] r8169: remove not needed debug print in rtl8169_init_phy

Message ID 0893f739-3342-de76-8a1a-e4f2a107ecc8@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series r8169: factor out chip-specific PHY configuration to a separate source file | expand

Commit Message

Heiner Kallweit Jan. 9, 2020, 7:26 p.m. UTC 
Remove a useless debug statement. This also allows to remove the
net_device parameter from rtl8169_init_phy().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index df3df5e70..7277d39f5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -3622,15 +3622,14 @@  static void rtl_schedule_task(struct rtl8169_private *tp, enum rtl_flag flag)
 		schedule_work(&tp->wk.work);
 }
 
-static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
+static void rtl8169_init_phy(struct rtl8169_private *tp)
 {
 	r8169_hw_phy_config(tp, tp->phydev, tp->mac_version);
 
 	if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
 		pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
 		pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
-		netif_dbg(tp, drv, dev,
-			  "Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+		/* set undocumented MAC Reg C+CR Offset 0x82h */
 		RTL_W8(tp, 0x82, 0x01);
 	}
 
@@ -6245,7 +6244,7 @@  static int rtl_open(struct net_device *dev)
 
 	napi_enable(&tp->napi);
 
-	rtl8169_init_phy(dev, tp);
+	rtl8169_init_phy(tp);
 
 	rtl_pll_power_up(tp);
 
@@ -6376,7 +6375,7 @@  static void __rtl8169_resume(struct net_device *dev)
 	netif_device_attach(dev);
 
 	rtl_pll_power_up(tp);
-	rtl8169_init_phy(dev, tp);
+	rtl8169_init_phy(tp);
 
 	phy_start(tp->phydev);