@@ -2186,48 +2186,197 @@ the field value of file.
2.2.36 Using Control Group
^^^^^^^^^^^^^^^^^^^^^^^^^^
-Some of LTP tests need Control Group in their configuration, tst_cgroup.h provides
-APIs to make cgroup unified mounting at setup phase to be possible. The method is
-extracted from mem.h with the purpose of extendible for further developing, and
-trying to compatible the current two versions of cgroup.
-Considering there are many differences between cgroup v1 and v2, here we capsulate
-the detail of cgroup mounting in high-level functions, which will be easier to use
-cgroup without caring about too much technical thing.
+Some LTP tests need specific Control Group configurations. tst_cgroup.h provides
+APIs to discover and use CGroups. There are many differences between CGroups API
+V1 and V2. We encapsulate the details of configuring CGroups in high-level
+functions which follow the V2 kernel API. Allowing one to use CGroups without
+caring too much about the current system's configuration.
-Also, we do cgroup mount/umount work for the different hierarchy automatically.
+Also, the LTP library will automatically mount/umount and configure the CGroup
+hierarchies if that is required (e.g. if you run the tests from init with no
+system manager).
[source,c]
-------------------------------------------------------------------------------
#include "tst_test.h"
+#include "tst_cgroup.h"
+
+static const struct tst_cgroup_group *cg;
static void run(void)
{
...
+ // do test under cgroup
+ ...
+}
+
+static void setup(void)
+{
+ tst_cgroup_require("memory", NULL);
+ cg = tst_cgroup_get_test_group();
+ SAFE_CGROUP_PRINTF(cg, "cgroup.procs", "%d", getpid());
+ SAFE_CGROUP_PRINTF(cg, "memory.max", "%lu", MEMSIZE);
+ if (SAFE_CGROUP_HAS(cg, "memory.swap.max"))
+ SAFE_CGROUP_PRINTF(cg, "memory.swap.max", "%zu", memsw);
+}
- tst_cgroup_move_current(PATH_TMP_CG_MEM);
- tst_cgroup_mem_set_maxbytes(PATH_TMP_CG_MEM, MEMSIZE);
+static void cleanup(void)
+{
+ tst_cgroup_cleanup();
+}
- // do test under cgroup
+struct tst_test test = {
+ .setup = setup,
+ .test_all = run,
+ .cleanup = cleanup,
...
+};
+-------------------------------------------------------------------------------
+
+Above, we first ensure the memory controller is available on the
+test's CGroup with 'tst_cgroup_require'. We then get a structure,
+'cg', which represents the test's CGroup. Note that
+'tst_cgroup_get_test_group' should not be called many times, as it is
+allocated in a guarded buffer (See section 2.2.31). Therefor it is
+best to call it once in 'setup' and not 'run' because 'run' may be
+repeated with the '-i' option.
+
+We then write the current processes PID into 'cgroup.procs', which
+moves the current process into the test's CGroup. After which we set
+the maximum memory size by writing to 'memory.max'. If the memory
+controller is mounted on CGroups V1 then the library will actually
+write to 'memory.limit_in_bytes'. As a general rule, if a file exists
+on both CGroup versions, then we use the V2 naming.
+
+Some controller features, such as 'memory.swap', can be
+disabled. Therefor we need to check if they exist before accessing
+them. This can be done with 'SAFE_CGROUP_HAS' which can be called on
+any control file or feature.
+
+Most tests only require setting a few limits similar to the above. In
+such cases the differences between V1 and V2 are hidden. Setup and
+cleanup is also mostly hidden. However things can get much worse.
+
+[source,c]
+-------------------------------------------------------------------------------
+static const struct tst_cgroup_group *cg;
+static const struct tst_cgroup_group *cg_drain;
+static struct tst_cgroup_group *cg_child;
+
+static void run(void)
+{
+ char buf[BUFSIZ];
+ size_t mem = 0;
+
+ cg_child = tst_cgroup_group_mk(cg, "child");
+ SAFE_CGROUP_PRINTF(cg_child, "cgroup.procs", "%d", getpid());
+
+ if (TST_CGROUP_VER(cg, "memory") != TST_CGROUP_V1)
+ SAFE_CGROUP_PRINT(cg, "cgroup.subtree_control", "+memory");
+ if (TST_CGROUP_VER(cg, "cpuset") != TST_CGROUP_V1)
+ SAFE_CGROUP_PRINT(cg, "cgroup.subtree_control", "+cpuset");
+
+ if (!SAFE_FORK()) {
+ SAFE_CGROUP_PRINTF(cg_child, "cgroup.procs", "%d", getpid());
+
+ if (SAFE_CGROUP_HAS(cg_child, "memory.swap"))
+ SAFE_CGROUP_SCANF(cg_child, "memory.swap.current", "%zu", &mem);
+ SAFE_CGROUP_READ(cg_child, "cpuset.mems", buf, sizeof(buf));
+
+ // Do something with cpuset.mems and memory.current values
+ ...
+
+ exit(0);
+ }
+
+ tst_reap_children();
+ SAFE_CGROUP_PRINTF(cg_drain, "cgroup.procs", "%d", getpid());
+ cg_child = tst_cgroup_group_rm(cg_child);
}
static void setup(void)
{
- tst_cgroup_mount(TST_CGROUP_MEMCG, PATH_TMP_CG_MEM);
+ tst_cgroup_require("memory", NULL);
+ tst_cgroup_require("cpuset", NULL);
+
+ cg = tst_cgroup_get_test_group();
+ cg_drain = tst_cgroup_get_drain_group();
}
static void cleanup(void)
{
- tst_cgroup_umount(PATH_TMP_CG_MEM);
+ if (cg_child) {
+ SAFE_CGROUP_PRINTF(cg_drain, "cgroup.procs", "%d", getpid());
+ cg_child = tst_cgroup_group_rm(cg_child);
+ }
+
+ tst_cgroup_cleanup();
}
struct tst_test test = {
+ .setup = setup,
.test_all = run,
+ .cleanup = cleanup,
...
};
-------------------------------------------------------------------------------
+Starting with setup; we can see here that we also fetch the 'drain'
+CGroup. This is a shared group (between parallel tests) which may
+contain processes from other tests. It should have default settings and
+these should not be changed by the test. It can be used to remove
+processes from other CGroups incase the hierarchy root is not
+accessible.
+
+In 'run', we first create a child CGroup with 'tst_cgroup_mk'. As we
+create this CGroup in 'run' we should also remove it at the end of
+run. We also need to check if it exists and remove it in cleanup as
+well. Because there are 'SAFE_' functions which may jump to cleanup.
+
+We then move the main test process into the child CGroup. This is
+important as it means that before we destroy the child CGroup we have
+to move the main test process elsewhere. For that we use the 'drain'
+group.
+
+Next we enable the memory and cpuset controller configuration on the
+test CGroup's descendants (i.e. 'cg_child'). This allows each child to
+have its own settings. The file 'cgroup.subtree_control' does not
+exist on V1. Because it is possible to have both V1 and V2 active at
+the same time. We can not simply check if 'subtree_control' exists
+before writing to it. We have to check if a particular controller is
+on V2 before trying to add it to 'subtree_control'. Trying to add a V1
+controller will result in 'ENOENT'.
+
+We then fork a child process and add this to the child CGroup. Within
+the child process we try to read 'memory.swap.current'. It is possible
+that the memory controller was compiled without swap support, so it is
+necessary to check if 'memory.swap' is enabled. That is unless the
+test will never reach the point where 'memory.swap.*' are used without
+swap support.
+
+The parent process waits for the child process to be reaped before
+destroying the child CGroup. So there is no need to transfer the child
+to drain. However the parent process must be moved otherwise we will
+get 'EBUSY' when trying to remove the child CGroup.
+
+Another example of an edge case is the following.
+
+[source,c]
+-------------------------------------------------------------------------------
+ if (TST_CGROUP_VER(cg, "memory") == TST_CGROUP_V1)
+ SAFE_CGROUP_PRINTF(cg, "memory.swap.max", "%lu", ~0UL);
+ else
+ SAFE_CGROUP_PRINT(cg, "memory.swap.max", "max");
+-------------------------------------------------------------------------------
+
+CGroups V2 introduced a feature where 'memory[.swap].max' could be set to
+"max". This does not appear to work on V1 'limit_in_bytes' however. For most
+tests, simply using a large number is sufficient and there is no need to use
+"max". Importantly though, one should be careful to read both the V1 and V2
+kernel docs. The LTP library can not handle all edge cases. It does the minimal
+amount of work to make testing on both V1 and V2 feasible.
+
2.2.37 Require minimum numbers of CPU for a testcase
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> --- doc/test-writing-guidelines.txt | 175 +++++++++++++++++++++++++++++--- 1 file changed, 162 insertions(+), 13 deletions(-)