Message ID | 1658198910-21458-1-git-send-email-zhanghongchen@loongson.cn |
---|---|
State | Changes Requested |
Headers | show |
Series | [v3] syslog11: convert to new LTP API | expand |
Hi! > convert to use new LTP API for syslog11. You should at least mention here that the printk file is now saved and restored since that is a functional change. Or even better do the functional change that saves and restores the file in a separate patch. > Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> > --- > testcases/kernel/syscalls/syslog/syslog11.c | 231 +++++----------------------- > 1 file changed, 42 insertions(+), 189 deletions(-) > > diff --git a/testcases/kernel/syscalls/syslog/syslog11.c b/testcases/kernel/syscalls/syslog/syslog11.c > index b9540ef..b6fb4a8 100644 > --- a/testcases/kernel/syscalls/syslog/syslog11.c > +++ b/testcases/kernel/syscalls/syslog/syslog11.c > @@ -1,212 +1,65 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later The original lincense is GPL-2.0-only we can't change the license to or-later here. > /* > - * Copyright (c) Wipro Technologies Ltd, 2002. All Rights Reserved. > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of version 2 of the GNU General Public License as > - * published by the Free Software Foundation. > - * > - * This program is distributed in the hope that it would be useful, but > - * WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > - * > - * You should have received a copy of the GNU General Public License along > - * with this program; if not, write the Free Software Foundation, Inc., > - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. > - * > + * Author: Madhu T L <madhu.tarikere@wipro.com> > */ > -/********************************************************** > - * > - * TEST IDENTIFIER : syslog11 > - * > - * EXECUTED BY : root / superuser > - * > - * TEST TITLE : Basic tests for syslog(2) > - * > - * TEST CASE TOTAL : 11 > - * > - * AUTHOR : Madhu T L <madhu.tarikere@wipro.com> > - * > - * SIGNALS > - * Uses SIGUSR1 to pause before test if option set. > - * (See the parse_opts(3) man page). > - * > - * DESCRIPTION > - * Verify that, syslog(2) is successful for type ranging from 1 to 8 > - * > - * Setup: > - * Setup signal handling. > - * Test caller is superuser > - * Check existence of user nobody > - * Pause for SIGUSR1 if option specified. > - * > - * Test: > - * Loop if the proper options are given. > - * Execute system call > - * Check return value, if not successful, > - * Issue FAIL message > - * Otherwise, > - * Issue PASS message > - * > - * Cleanup: > - * Print errno log and/or timing stats if options given > - * > - * USAGE: <for command-line> > - * syslog11 [-c n] [-e] [-f] [-h] [-i n] [-I x] [-p] [-P x] [-t] > - * where, -c n : Run n copies concurrently. > - * -e : Turn on errno logging. > - * -f : Turn off functional testing > - * -h : Show help screen > - * -i n : Execute test n times. > - * -I x : Execute test for x seconds. > - * -p : Pause for SIGUSR1 before starting > - * -P x : Pause for x seconds between iterations. > - * -t : Turn on syscall timing. > + > +/* > + * [Description] > + * Verify that, syslog(2) is successful for type ranging from 1 to 8 > * > - ****************************************************************/ > + */ > > #include <errno.h> > -#include <pwd.h> > -#include <sys/types.h> > -#include <unistd.h> > -#include <linux/unistd.h> > -#include <sys/syscall.h> > -#include "test.h" > -#include "safe_macros.h" > > -#define UNEXP_RET_VAL -1 > +#include "tst_test.h" > +#include "lapi/syscalls.h" > +#include "tst_safe_macros.h" > > -struct test_case_t { /* test case structure */ > +struct tcase { /* test case structure */ > int type; /* 1st arg. */ > char *buf; /* 2nd arg. */ > int len; /* 3rd arg. */ > - int (*setup) (void); /* Individual setup routine */ > - void (*cleanup) (void); /* Individual cleanup routine */ > char *desc; /* Test description */ > }; I would have removed these comments as well, there is no point in commenting the obvious here. > -char *TCID = "syslog11"; > -static int testno; > static char buf; > -static struct passwd *ltpuser; > - > -static void setup(void); > -static void cleanup(void); > -static int setup1(void); > -static void cleanup1(void); > > -#define syslog(arg1, arg2, arg3) syscall(__NR_syslog, arg1, arg2, arg3) > +#define syslog(arg1, arg2, arg3) tst_syscall(__NR_syslog, arg1, arg2, arg3) > > -static struct test_case_t tdat[] = { > +static struct tcase tcases[] = { > /* Type 0 and 1 are currently not implemented, always returns success */ > - {0, &buf, 0, NULL, NULL, "type 0/Close the log"}, > - {1, &buf, 0, NULL, NULL, "type 1/Open the log"}, > - {2, &buf, 0, NULL, NULL, "type 2/Read from the log"}, > - {3, &buf, 0, NULL, NULL, "type 3/Read ring buffer"}, > - {3, &buf, 0, setup1, cleanup1, "type 3/Read ring buffer for non-root " > - "user"}, Looking at the syslog12.c the non-root user read with EPERM is covered there, so it's fine to drop it from this test. But please mention that in the commit message as well. > - /* Next two lines will clear dmesg. Uncomment if that is okay. -Robbie Williamson */ > - /* { 4, &buf, 0, NULL, NULL, "type 4/Read and clear ring buffer" }, */ > - /* { 5, &buf, 0, NULL, NULL, "type 5/Clear ring buffer" }, */ > - > - {8, NULL, 1, NULL, NULL, "type 8/Set log level to 1"}, > - {8, NULL, 7, NULL, NULL, "type 8/Set log level to 7(default)"}, > - {6, NULL, 0, NULL, NULL, "type 6/Disable printk's to console"}, > - {7, NULL, 0, NULL, NULL, "type 7/Enable printk's to console"}, > + {0, &buf, 0, "type 0/Close the log"}, > + {1, &buf, 0, "type 1/Open the log"}, > + {2, &buf, 0, "type 2/Read from the log"}, > + {3, &buf, 0, "type 3/Read ring buffer"}, > + /* > + * Next two lines will clear dmesg. > + * Uncomment if that is okay. -Robbie Williamson > + */ > + /* > + * { 4, &buf, 0, "type 4/Read and clear ring buffer" }, > + * { 5, &buf, 0, "type 5/Clear ring buffer" }, > + */ > + {8, NULL, 1, "type 8/Set log level to 1"}, > + {8, NULL, 7, "type 8/Set log level to 7(default)"}, > + {6, NULL, 0, "type 6/Disable printk's to console"}, > + {7, NULL, 0, "type 7/Enable printk's to console"}, > }; > > -int TST_TOTAL = sizeof(tdat) / sizeof(tdat[0]); > - > -int main(int argc, char **argv) > +static void run(unsigned int n) > { > - int lc; > - > - tst_parse_opts(argc, argv, NULL, NULL); > - setup(); > - > - for (lc = 0; TEST_LOOPING(lc); lc++) { > - /* reset tst_count in case we are looping */ > - tst_count = 0; > - > - for (testno = 0; testno < TST_TOTAL; ++testno) { > + struct tcase *tc = &tcases[n]; > > - if (tdat[testno].setup && tdat[testno].setup()) { > - /* Setup failed, skip this testcase */ > - continue; > - } > - > - TEST(syslog(tdat[testno].type, tdat[testno].buf, > - tdat[testno].len)); > - > - if (TEST_RETURN == UNEXP_RET_VAL) { > - if (TEST_ERRNO == EPERM && geteuid() != 0) { > - tst_resm(TPASS, > - "syslog() passed for %s (non-root EPERM is OK)", > - tdat[testno].desc); > - } else { > - tst_resm(TFAIL, > - "syslog() failed for %s: errno " > - "%d (%s)", tdat[testno].desc, > - TEST_ERRNO, strerror(errno)); > - } > - } else { > - tst_resm(TPASS, "syslog() successful for %s", > - tdat[testno].desc); > - } > - > - if (tdat[testno].cleanup) { > - tdat[testno].cleanup(); > - } > - } > - } > - cleanup(); > - > - tst_exit(); > -} > - > -int setup1(void) > -{ > - /* Change effective user id to nodody */ > - if (seteuid(ltpuser->pw_uid) == -1) { > - tst_resm(TBROK, "seteuid failed to set the effective" > - " uid to %d", ltpuser->pw_uid); > - return 1; > - } > - return 0; > + TST_EXP_PASS(syslog(tc->type, tc->buf, tc->len), > + "syslog() with %s", tc->desc); > } > > -void cleanup1(void) > -{ > - /* Change effective user id to root */ > - SAFE_SETEUID(NULL, 0); > -} > - > -/* > - * setup() > - * performs all ONE TIME setup for this test > - */ > -void setup(void) > -{ > - tst_require_root(); > - > - tst_sig(NOFORK, DEF_HANDLER, cleanup); > - > - /* Check for nobody_uid user id */ > - if ((ltpuser = getpwnam("nobody")) == NULL) { > - tst_brkm(TBROK, NULL, "nobody user id doesn't exist"); > - } > - > - /* Pause if that option was specified > - * TEST_PAUSE contains the code to fork the test with the -c option. > - */ > - TEST_PAUSE; > -} > - > -/* > - * cleanup() > - * performs all ONE TIME cleanup for this test at > - * completion or premature exit > - */ > -void cleanup(void) > -{ > - > -} > +static struct tst_test test = { > + .test = run, > + .save_restore = (const struct tst_path_val[]) { > + {"!/proc/sys/kernel/printk", NULL}, > + {NULL, NULL} > + }, > + .needs_root = 1, > + .tcnt = ARRAY_SIZE(tcases), > +}; > -- > 1.8.3.1 >
On 2022/7/19 pm 4:45, Cyril Hrubis wrote: > Hi! >> convert to use new LTP API for syslog11. > > You should at least mention here that the printk file is now saved and > restored since that is a functional change. > > Or even better do the functional change that saves and restores the file > in a separate patch. OK, I will split the patch into two. > >> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> >> --- >> testcases/kernel/syscalls/syslog/syslog11.c | 231 +++++----------------------- >> 1 file changed, 42 insertions(+), 189 deletions(-) >> >> diff --git a/testcases/kernel/syscalls/syslog/syslog11.c b/testcases/kernel/syscalls/syslog/syslog11.c >> index b9540ef..b6fb4a8 100644 >> --- a/testcases/kernel/syscalls/syslog/syslog11.c >> +++ b/testcases/kernel/syscalls/syslog/syslog11.c >> @@ -1,212 +1,65 @@ >> +// SPDX-License-Identifier: GPL-2.0-or-later > > The original lincense is GPL-2.0-only we can't change the license to > or-later here. > OK, I will change to GPL-2.0-only. >> /* >> - * Copyright (c) Wipro Technologies Ltd, 2002. All Rights Reserved. >> - * >> - * This program is free software; you can redistribute it and/or modify it >> - * under the terms of version 2 of the GNU General Public License as >> - * published by the Free Software Foundation. >> - * >> - * This program is distributed in the hope that it would be useful, but >> - * WITHOUT ANY WARRANTY; without even the implied warranty of >> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >> - * >> - * You should have received a copy of the GNU General Public License along >> - * with this program; if not, write the Free Software Foundation, Inc., >> - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. >> - * >> + * Author: Madhu T L <madhu.tarikere@wipro.com> >> */ >> -/********************************************************** >> - * >> - * TEST IDENTIFIER : syslog11 >> - * >> - * EXECUTED BY : root / superuser >> - * >> - * TEST TITLE : Basic tests for syslog(2) >> - * >> - * TEST CASE TOTAL : 11 >> - * >> - * AUTHOR : Madhu T L <madhu.tarikere@wipro.com> >> - * >> - * SIGNALS >> - * Uses SIGUSR1 to pause before test if option set. >> - * (See the parse_opts(3) man page). >> - * >> - * DESCRIPTION >> - * Verify that, syslog(2) is successful for type ranging from 1 to 8 >> - * >> - * Setup: >> - * Setup signal handling. >> - * Test caller is superuser >> - * Check existence of user nobody >> - * Pause for SIGUSR1 if option specified. >> - * >> - * Test: >> - * Loop if the proper options are given. >> - * Execute system call >> - * Check return value, if not successful, >> - * Issue FAIL message >> - * Otherwise, >> - * Issue PASS message >> - * >> - * Cleanup: >> - * Print errno log and/or timing stats if options given >> - * >> - * USAGE: <for command-line> >> - * syslog11 [-c n] [-e] [-f] [-h] [-i n] [-I x] [-p] [-P x] [-t] >> - * where, -c n : Run n copies concurrently. >> - * -e : Turn on errno logging. >> - * -f : Turn off functional testing >> - * -h : Show help screen >> - * -i n : Execute test n times. >> - * -I x : Execute test for x seconds. >> - * -p : Pause for SIGUSR1 before starting >> - * -P x : Pause for x seconds between iterations. >> - * -t : Turn on syscall timing. >> + >> +/* >> + * [Description] >> + * Verify that, syslog(2) is successful for type ranging from 1 to 8 >> * >> - ****************************************************************/ >> + */ >> >> #include <errno.h> >> -#include <pwd.h> >> -#include <sys/types.h> >> -#include <unistd.h> >> -#include <linux/unistd.h> >> -#include <sys/syscall.h> >> -#include "test.h" >> -#include "safe_macros.h" >> >> -#define UNEXP_RET_VAL -1 >> +#include "tst_test.h" >> +#include "lapi/syscalls.h" >> +#include "tst_safe_macros.h" >> >> -struct test_case_t { /* test case structure */ >> +struct tcase { /* test case structure */ >> int type; /* 1st arg. */ >> char *buf; /* 2nd arg. */ >> int len; /* 3rd arg. */ >> - int (*setup) (void); /* Individual setup routine */ >> - void (*cleanup) (void); /* Individual cleanup routine */ >> char *desc; /* Test description */ >> }; > > I would have removed these comments as well, there is no point in > commenting the obvious here. Agree, I will remove them in v4 patch. > >> -char *TCID = "syslog11"; >> -static int testno; >> static char buf; >> -static struct passwd *ltpuser; >> - >> -static void setup(void); >> -static void cleanup(void); >> -static int setup1(void); >> -static void cleanup1(void); >> >> -#define syslog(arg1, arg2, arg3) syscall(__NR_syslog, arg1, arg2, arg3) >> +#define syslog(arg1, arg2, arg3) tst_syscall(__NR_syslog, arg1, arg2, arg3) >> >> -static struct test_case_t tdat[] = { >> +static struct tcase tcases[] = { >> /* Type 0 and 1 are currently not implemented, always returns success */ >> - {0, &buf, 0, NULL, NULL, "type 0/Close the log"}, >> - {1, &buf, 0, NULL, NULL, "type 1/Open the log"}, >> - {2, &buf, 0, NULL, NULL, "type 2/Read from the log"}, >> - {3, &buf, 0, NULL, NULL, "type 3/Read ring buffer"}, >> - {3, &buf, 0, setup1, cleanup1, "type 3/Read ring buffer for non-root " >> - "user"}, > > Looking at the syslog12.c the non-root user read with EPERM is covered > there, so it's fine to drop it from this test. But please mention that > in the commit message as well. OK, I will add them in commit message in the v4 patch. > >> - /* Next two lines will clear dmesg. Uncomment if that is okay. -Robbie Williamson */ >> - /* { 4, &buf, 0, NULL, NULL, "type 4/Read and clear ring buffer" }, */ >> - /* { 5, &buf, 0, NULL, NULL, "type 5/Clear ring buffer" }, */ >> - >> - {8, NULL, 1, NULL, NULL, "type 8/Set log level to 1"}, >> - {8, NULL, 7, NULL, NULL, "type 8/Set log level to 7(default)"}, >> - {6, NULL, 0, NULL, NULL, "type 6/Disable printk's to console"}, >> - {7, NULL, 0, NULL, NULL, "type 7/Enable printk's to console"}, >> + {0, &buf, 0, "type 0/Close the log"}, >> + {1, &buf, 0, "type 1/Open the log"}, >> + {2, &buf, 0, "type 2/Read from the log"}, >> + {3, &buf, 0, "type 3/Read ring buffer"}, >> + /* >> + * Next two lines will clear dmesg. >> + * Uncomment if that is okay. -Robbie Williamson >> + */ >> + /* >> + * { 4, &buf, 0, "type 4/Read and clear ring buffer" }, >> + * { 5, &buf, 0, "type 5/Clear ring buffer" }, >> + */ >> + {8, NULL, 1, "type 8/Set log level to 1"}, >> + {8, NULL, 7, "type 8/Set log level to 7(default)"}, >> + {6, NULL, 0, "type 6/Disable printk's to console"}, >> + {7, NULL, 0, "type 7/Enable printk's to console"}, >> }; >> >> -int TST_TOTAL = sizeof(tdat) / sizeof(tdat[0]); >> - >> -int main(int argc, char **argv) >> +static void run(unsigned int n) >> { >> - int lc; >> - >> - tst_parse_opts(argc, argv, NULL, NULL); >> - setup(); >> - >> - for (lc = 0; TEST_LOOPING(lc); lc++) { >> - /* reset tst_count in case we are looping */ >> - tst_count = 0; >> - >> - for (testno = 0; testno < TST_TOTAL; ++testno) { >> + struct tcase *tc = &tcases[n]; >> >> - if (tdat[testno].setup && tdat[testno].setup()) { >> - /* Setup failed, skip this testcase */ >> - continue; >> - } >> - >> - TEST(syslog(tdat[testno].type, tdat[testno].buf, >> - tdat[testno].len)); >> - >> - if (TEST_RETURN == UNEXP_RET_VAL) { >> - if (TEST_ERRNO == EPERM && geteuid() != 0) { >> - tst_resm(TPASS, >> - "syslog() passed for %s (non-root EPERM is OK)", >> - tdat[testno].desc); >> - } else { >> - tst_resm(TFAIL, >> - "syslog() failed for %s: errno " >> - "%d (%s)", tdat[testno].desc, >> - TEST_ERRNO, strerror(errno)); >> - } >> - } else { >> - tst_resm(TPASS, "syslog() successful for %s", >> - tdat[testno].desc); >> - } >> - >> - if (tdat[testno].cleanup) { >> - tdat[testno].cleanup(); >> - } >> - } >> - } >> - cleanup(); >> - >> - tst_exit(); >> -} >> - >> -int setup1(void) >> -{ >> - /* Change effective user id to nodody */ >> - if (seteuid(ltpuser->pw_uid) == -1) { >> - tst_resm(TBROK, "seteuid failed to set the effective" >> - " uid to %d", ltpuser->pw_uid); >> - return 1; >> - } >> - return 0; >> + TST_EXP_PASS(syslog(tc->type, tc->buf, tc->len), >> + "syslog() with %s", tc->desc); >> } >> >> -void cleanup1(void) >> -{ >> - /* Change effective user id to root */ >> - SAFE_SETEUID(NULL, 0); >> -} >> - >> -/* >> - * setup() >> - * performs all ONE TIME setup for this test >> - */ >> -void setup(void) >> -{ >> - tst_require_root(); >> - >> - tst_sig(NOFORK, DEF_HANDLER, cleanup); >> - >> - /* Check for nobody_uid user id */ >> - if ((ltpuser = getpwnam("nobody")) == NULL) { >> - tst_brkm(TBROK, NULL, "nobody user id doesn't exist"); >> - } >> - >> - /* Pause if that option was specified >> - * TEST_PAUSE contains the code to fork the test with the -c option. >> - */ >> - TEST_PAUSE; >> -} >> - >> -/* >> - * cleanup() >> - * performs all ONE TIME cleanup for this test at >> - * completion or premature exit >> - */ >> -void cleanup(void) >> -{ >> - >> -} >> +static struct tst_test test = { >> + .test = run, >> + .save_restore = (const struct tst_path_val[]) { >> + {"!/proc/sys/kernel/printk", NULL}, >> + {NULL, NULL} >> + }, >> + .needs_root = 1, >> + .tcnt = ARRAY_SIZE(tcases), >> +}; >> -- >> 1.8.3.1 >> > Best Regards. Hongcheng Zhang
diff --git a/testcases/kernel/syscalls/syslog/syslog11.c b/testcases/kernel/syscalls/syslog/syslog11.c index b9540ef..b6fb4a8 100644 --- a/testcases/kernel/syscalls/syslog/syslog11.c +++ b/testcases/kernel/syscalls/syslog/syslog11.c @@ -1,212 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - * Copyright (c) Wipro Technologies Ltd, 2002. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * + * Author: Madhu T L <madhu.tarikere@wipro.com> */ -/********************************************************** - * - * TEST IDENTIFIER : syslog11 - * - * EXECUTED BY : root / superuser - * - * TEST TITLE : Basic tests for syslog(2) - * - * TEST CASE TOTAL : 11 - * - * AUTHOR : Madhu T L <madhu.tarikere@wipro.com> - * - * SIGNALS - * Uses SIGUSR1 to pause before test if option set. - * (See the parse_opts(3) man page). - * - * DESCRIPTION - * Verify that, syslog(2) is successful for type ranging from 1 to 8 - * - * Setup: - * Setup signal handling. - * Test caller is superuser - * Check existence of user nobody - * Pause for SIGUSR1 if option specified. - * - * Test: - * Loop if the proper options are given. - * Execute system call - * Check return value, if not successful, - * Issue FAIL message - * Otherwise, - * Issue PASS message - * - * Cleanup: - * Print errno log and/or timing stats if options given - * - * USAGE: <for command-line> - * syslog11 [-c n] [-e] [-f] [-h] [-i n] [-I x] [-p] [-P x] [-t] - * where, -c n : Run n copies concurrently. - * -e : Turn on errno logging. - * -f : Turn off functional testing - * -h : Show help screen - * -i n : Execute test n times. - * -I x : Execute test for x seconds. - * -p : Pause for SIGUSR1 before starting - * -P x : Pause for x seconds between iterations. - * -t : Turn on syscall timing. + +/* + * [Description] + * Verify that, syslog(2) is successful for type ranging from 1 to 8 * - ****************************************************************/ + */ #include <errno.h> -#include <pwd.h> -#include <sys/types.h> -#include <unistd.h> -#include <linux/unistd.h> -#include <sys/syscall.h> -#include "test.h" -#include "safe_macros.h" -#define UNEXP_RET_VAL -1 +#include "tst_test.h" +#include "lapi/syscalls.h" +#include "tst_safe_macros.h" -struct test_case_t { /* test case structure */ +struct tcase { /* test case structure */ int type; /* 1st arg. */ char *buf; /* 2nd arg. */ int len; /* 3rd arg. */ - int (*setup) (void); /* Individual setup routine */ - void (*cleanup) (void); /* Individual cleanup routine */ char *desc; /* Test description */ }; -char *TCID = "syslog11"; -static int testno; static char buf; -static struct passwd *ltpuser; - -static void setup(void); -static void cleanup(void); -static int setup1(void); -static void cleanup1(void); -#define syslog(arg1, arg2, arg3) syscall(__NR_syslog, arg1, arg2, arg3) +#define syslog(arg1, arg2, arg3) tst_syscall(__NR_syslog, arg1, arg2, arg3) -static struct test_case_t tdat[] = { +static struct tcase tcases[] = { /* Type 0 and 1 are currently not implemented, always returns success */ - {0, &buf, 0, NULL, NULL, "type 0/Close the log"}, - {1, &buf, 0, NULL, NULL, "type 1/Open the log"}, - {2, &buf, 0, NULL, NULL, "type 2/Read from the log"}, - {3, &buf, 0, NULL, NULL, "type 3/Read ring buffer"}, - {3, &buf, 0, setup1, cleanup1, "type 3/Read ring buffer for non-root " - "user"}, - /* Next two lines will clear dmesg. Uncomment if that is okay. -Robbie Williamson */ - /* { 4, &buf, 0, NULL, NULL, "type 4/Read and clear ring buffer" }, */ - /* { 5, &buf, 0, NULL, NULL, "type 5/Clear ring buffer" }, */ - - {8, NULL, 1, NULL, NULL, "type 8/Set log level to 1"}, - {8, NULL, 7, NULL, NULL, "type 8/Set log level to 7(default)"}, - {6, NULL, 0, NULL, NULL, "type 6/Disable printk's to console"}, - {7, NULL, 0, NULL, NULL, "type 7/Enable printk's to console"}, + {0, &buf, 0, "type 0/Close the log"}, + {1, &buf, 0, "type 1/Open the log"}, + {2, &buf, 0, "type 2/Read from the log"}, + {3, &buf, 0, "type 3/Read ring buffer"}, + /* + * Next two lines will clear dmesg. + * Uncomment if that is okay. -Robbie Williamson + */ + /* + * { 4, &buf, 0, "type 4/Read and clear ring buffer" }, + * { 5, &buf, 0, "type 5/Clear ring buffer" }, + */ + {8, NULL, 1, "type 8/Set log level to 1"}, + {8, NULL, 7, "type 8/Set log level to 7(default)"}, + {6, NULL, 0, "type 6/Disable printk's to console"}, + {7, NULL, 0, "type 7/Enable printk's to console"}, }; -int TST_TOTAL = sizeof(tdat) / sizeof(tdat[0]); - -int main(int argc, char **argv) +static void run(unsigned int n) { - int lc; - - tst_parse_opts(argc, argv, NULL, NULL); - setup(); - - for (lc = 0; TEST_LOOPING(lc); lc++) { - /* reset tst_count in case we are looping */ - tst_count = 0; - - for (testno = 0; testno < TST_TOTAL; ++testno) { + struct tcase *tc = &tcases[n]; - if (tdat[testno].setup && tdat[testno].setup()) { - /* Setup failed, skip this testcase */ - continue; - } - - TEST(syslog(tdat[testno].type, tdat[testno].buf, - tdat[testno].len)); - - if (TEST_RETURN == UNEXP_RET_VAL) { - if (TEST_ERRNO == EPERM && geteuid() != 0) { - tst_resm(TPASS, - "syslog() passed for %s (non-root EPERM is OK)", - tdat[testno].desc); - } else { - tst_resm(TFAIL, - "syslog() failed for %s: errno " - "%d (%s)", tdat[testno].desc, - TEST_ERRNO, strerror(errno)); - } - } else { - tst_resm(TPASS, "syslog() successful for %s", - tdat[testno].desc); - } - - if (tdat[testno].cleanup) { - tdat[testno].cleanup(); - } - } - } - cleanup(); - - tst_exit(); -} - -int setup1(void) -{ - /* Change effective user id to nodody */ - if (seteuid(ltpuser->pw_uid) == -1) { - tst_resm(TBROK, "seteuid failed to set the effective" - " uid to %d", ltpuser->pw_uid); - return 1; - } - return 0; + TST_EXP_PASS(syslog(tc->type, tc->buf, tc->len), + "syslog() with %s", tc->desc); } -void cleanup1(void) -{ - /* Change effective user id to root */ - SAFE_SETEUID(NULL, 0); -} - -/* - * setup() - * performs all ONE TIME setup for this test - */ -void setup(void) -{ - tst_require_root(); - - tst_sig(NOFORK, DEF_HANDLER, cleanup); - - /* Check for nobody_uid user id */ - if ((ltpuser = getpwnam("nobody")) == NULL) { - tst_brkm(TBROK, NULL, "nobody user id doesn't exist"); - } - - /* Pause if that option was specified - * TEST_PAUSE contains the code to fork the test with the -c option. - */ - TEST_PAUSE; -} - -/* - * cleanup() - * performs all ONE TIME cleanup for this test at - * completion or premature exit - */ -void cleanup(void) -{ - -} +static struct tst_test test = { + .test = run, + .save_restore = (const struct tst_path_val[]) { + {"!/proc/sys/kernel/printk", NULL}, + {NULL, NULL} + }, + .needs_root = 1, + .tcnt = ARRAY_SIZE(tcases), +};
convert to use new LTP API for syslog11. Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- testcases/kernel/syscalls/syslog/syslog11.c | 231 +++++----------------------- 1 file changed, 42 insertions(+), 189 deletions(-)