@@ -7,7 +7,7 @@ LTPLIBS = ltpipc ltpnewipc
include $(top_srcdir)/include/mk/testcases.mk
-semctl01 semctl05 semctl06 semctl07: LTPLDLIBS = -lltpipc
-semctl02 semctl03 semctl04 semctl08 semctl09: LTPLDLIBS = -lltpnewipc
+semctl01 semctl06 semctl07: LTPLDLIBS = -lltpipc
+semctl02 semctl03 semctl04 semctl05 semctl08 semctl09: LTPLDLIBS = -lltpnewipc
include $(top_srcdir)/include/mk/generic_leaf_target.mk
@@ -1,59 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- *
- * Copyright (c) International Business Machines Corp., 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ * Copyright (c) International Business Machines Corp., 2001
*/
-
/*
- * NAME
- * semctl05.c
- *
* DESCRIPTION
* semctl05 - test for ERANGE error
*
- * ALGORITHM
- * create a semaphore set with read and alter permissions
- * loop if that option was specified
- * call semctl() with three different invalid cases
- * check the errno value
- * issue a PASS message if we get ERANGE
- * otherwise, the tests fails
- * issue a FAIL message
- * call cleanup
- *
- * USAGE: <for command-line>
- * semctl05 [-c n] [-e] [-i n] [-I x] [-P x] [-t]
- * where, -c n : Run n copies concurrently.
- * -e : Turn on errno logging.
- * -i n : Execute test n times.
- * -I x : Execute test for x seconds.
- * -P x : Pause for x seconds between iterations.
- * -t : Turn on syscall timing.
- *
* HISTORY
* 03/2001 - Written by Wayne Boyer
- *
- * RESTRICTIONS
- * none
*/
-#include "ipcsem.h"
-
-char *TCID = "semctl05";
-int TST_TOTAL = 3;
+#include "tst_safe_sysv_ipc.h"
+#include "tst_test.h"
+#include "lapi/sem.h"
+#include "libnewipc.h"
#ifdef _XLC_COMPILER
#define SEMUN_CAST
@@ -61,118 +21,53 @@ int TST_TOTAL = 3;
#define SEMUN_CAST (union semun)
#endif
-int sem_id_1 = -1;
+static int sem_id = -1;
#define BIGV 65535 /* a number ((2^16)-1) that should be larger */
/* than the maximum for a semaphore value */
-#ifdef _XLC_COMPILER
-#define SEMUN_CAST
-#else
-#define SEMUN_CAST (union semun)
-#endif
-
unsigned short big_arr[] = { BIGV, BIGV, BIGV, BIGV, BIGV, BIGV, BIGV, BIGV,
BIGV, BIGV
};
-struct test_case_t {
+static struct tcases {
int count;
int cmd;
union semun t_arg;
-} TC[] = {
- /* ERANGE - the value to set is less than zero - SETVAL */
- {
- 5, SETVAL, SEMUN_CAST - 1},
- /* ERANGE - the values to set are too large, > semaphore max value */
- {
- 0, SETALL, SEMUN_CAST big_arr},
- /* ERANGE - the value to set is too large, > semaphore max value */
- {
- 5, SETVAL, SEMUN_CAST BIGV}
+ char *message;
+} tests[] = {
+ {5, SETVAL, SEMUN_CAST - 1, "the value to set is less than zero"},
+ {0, SETALL, SEMUN_CAST big_arr, "the value to set are too large"},
+ {5, SETVAL, SEMUN_CAST BIGV, "the value to set is too large"}
};
-int main(int ac, char **av)
+static void verify_semctl(unsigned int n)
{
- int lc;
- int i;
-
- tst_parse_opts(ac, av, NULL, NULL);
-
- setup(); /* global setup */
+ struct tcases *tc = &tests[n];
- /* The following loop checks looping state if -i option given */
-
- for (lc = 0; TEST_LOOPING(lc); lc++) {
- /* reset tst_count in case we are looping */
- tst_count = 0;
-
- for (i = 0; i < TST_TOTAL; i++) {
-
- TEST(semctl(sem_id_1, TC[i].count,
- TC[i].cmd, TC[i].t_arg));
-
- if (TEST_RETURN != -1) {
- tst_resm(TFAIL, "call succeeded unexpectedly");
- continue;
- }
-
- switch (TEST_ERRNO) {
- case ERANGE:
- tst_resm(TPASS, "expected failure - errno = "
- "%d : %s", TEST_ERRNO,
- strerror(TEST_ERRNO));
- break;
- default:
- tst_resm(TFAIL, "unexpected error "
- "- %d : %s", TEST_ERRNO,
- strerror(TEST_ERRNO));
- break;
- }
- }
- }
-
- cleanup();
-
- tst_exit();
+ TST_EXP_FAIL(semctl(sem_id, tc->count, tc->cmd, tc->t_arg), ERANGE,
+ "semctl() with %s", tc->message);
}
-/*
- * setup() - performs all the ONE TIME setup for this test.
- */
-void setup(void)
+static void setup(void)
{
+ static key_t semkey;
- tst_sig(NOFORK, DEF_HANDLER, cleanup);
+ semkey = GETIPCKEY();
- TEST_PAUSE;
-
- /*
- * Create a temporary directory and cd into it.
- * This helps to ensure that a unique msgkey is created.
- * See libs/libltpipc/libipc.c for more information.
- */
- tst_tmpdir();
-
- /* get an IPC resource key */
- semkey = getipckey();
-
- /* create a semaphore set with read and alter permissions */
- if ((sem_id_1 =
- semget(semkey, PSEMS, IPC_CREAT | IPC_EXCL | SEM_RA)) == -1) {
- tst_brkm(TBROK, cleanup, "couldn't create semaphore in setup");
- }
+ sem_id = SAFE_SEMGET(semkey, PSEMS, IPC_CREAT | IPC_EXCL | SEM_RA);
}
-/*
- * cleanup() - performs all the ONE TIME cleanup for this test at completion
- * or premature exit.
- */
-void cleanup(void)
+static void cleanup(void)
{
- /* if it exists, remove the semaphore resouce */
- rm_sema(sem_id_1);
-
- tst_rmdir();
-
+ if (sem_id != -1)
+ SAFE_SEMCTL(sem_id, 0, IPC_RMID);
}
+
+static struct tst_test test = {
+ .setup = setup,
+ .cleanup = cleanup,
+ .needs_root = 1,
+ .test = verify_semctl,
+ .tcnt = ARRAY_SIZE(tests),
+};
Also make use of TST_EXP_FAIL Signed-off-by: Feiyu Zhu <zhufy.jy@cn.fujitsu.com> --- testcases/kernel/syscalls/ipc/semctl/Makefile | 4 +- testcases/kernel/syscalls/ipc/semctl/semctl05.c | 169 +++++------------------- 2 files changed, 34 insertions(+), 139 deletions(-)