diff mbox

ADB_PMU_LED_IDE selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies

Message ID alpine.DEB.2.11.1310280031020.31521@trent.utfs.org (mailing list archive)
State Changes Requested
Headers show

Commit Message

Christian Kujau Oct. 28, 2013, 11:26 a.m. UTC
Hi,

for quite some time the following is printed (twice) after doing
"make oldconfig":

[...]
scripts/kconfig/conf --oldconfig Kconfig
warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS)
warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS)

I never got around to look into this. But I remember that (when I still 
had CONFIG_IDE selected, because CONFIG_PATA_MACIO was not working for my 
PowerBook G5), I always had ADB_PMU_LED_IDE selected, so this option was 
carried over to my current config.

When doing "make menuconfig" with this generated config I could see that 
all 3 necessary options are selected:

 Support for PMU  based PowerMacs               CONFIG_ADB_PMU         
  Support for the Power/iBook front LED		CONFIG_ADB_PMU_LED
    Use front LED as IDE LED by default		CONFIG_ADB_PMU_LED_IDE 

And CONFIG_ADB_PMU_LED_IDE selects CONFIG_LEDS_TRIGGER_IDE_DISK, which in 
turn depends on CONFIG_IDE_GD_ATA - but in "make menuconfig" I could still
*unselect* CONFIG_IDE (since I'm using CONFIG_PATA_MACIO) and the 3 
options above were still available. I guess "make oldconfig" noticed that 
and hence printed the warning above.

The following patch causes ADB_PMU_LED to depend on IDE_GD_ATA, so that 
the options above are only available when IDE_GD_ATA is actually selected 
and thus eliminates the warning.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>



Being a kbuild n00b, I don't know if this is the correct approach though.

After looking through the archives I found that this has been reported by 
Geert back in 2012 already: https://lkml.org/lkml/2012/3/13/556

Thanks,
Christian.

Comments

Benjamin Herrenschmidt Oct. 29, 2013, 11:13 p.m. UTC | #1
On Mon, 2013-10-28 at 04:26 -0700, Christian Kujau wrote:
> Hi,
> 
> for quite some time the following is printed (twice) after doing
> "make oldconfig":
> 
> [...]
> scripts/kconfig/conf --oldconfig Kconfig
> warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS)
> warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS)
> 
> I never got around to look into this. But I remember that (when I still 
> had CONFIG_IDE selected, because CONFIG_PATA_MACIO was not working for my 
> PowerBook G5), I always had ADB_PMU_LED_IDE selected, so this option was 
> carried over to my current config.
> 
> When doing "make menuconfig" with this generated config I could see that 
> all 3 necessary options are selected:
> 
>  Support for PMU  based PowerMacs               CONFIG_ADB_PMU         
>   Support for the Power/iBook front LED		CONFIG_ADB_PMU_LED
>     Use front LED as IDE LED by default		CONFIG_ADB_PMU_LED_IDE 
> 
> And CONFIG_ADB_PMU_LED_IDE selects CONFIG_LEDS_TRIGGER_IDE_DISK, which in 
> turn depends on CONFIG_IDE_GD_ATA - but in "make menuconfig" I could still
> *unselect* CONFIG_IDE (since I'm using CONFIG_PATA_MACIO) and the 3 
> options above were still available. I guess "make oldconfig" noticed that 
> and hence printed the warning above.
> 
> The following patch causes ADB_PMU_LED to depend on IDE_GD_ATA, so that 
> the options above are only available when IDE_GD_ATA is actually selected 
> and thus eliminates the warning.
> 
> Signed-off-by: Christian Kujau <lists@nerdbynature.de>
> 
> diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
> index 696238b..f30ac9d 100644
> --- a/drivers/macintosh/Kconfig
> +++ b/drivers/macintosh/Kconfig
> @@ -90,6 +90,7 @@ config ADB_PMU
>  config ADB_PMU_LED
>  	bool "Support for the Power/iBook front LED"
>  	depends on ADB_PMU
> +	depends on IDE_GD_ATA
>  	select NEW_LEDS
>  	select LEDS_CLASS
>  	help

You probably want to do that to the ADB_PMU_LED_IDE entry not the
ADB_PMU_LED one which doesn't have a dependency and isn't the one
selecting LEDS_TRIGGER_IDE_DISK :-)

Cheers,
Ben.

> 
> Being a kbuild n00b, I don't know if this is the correct approach though.
> 
> After looking through the archives I found that this has been reported by 
> Geert back in 2012 already: https://lkml.org/lkml/2012/3/13/556
> 
> Thanks,
> Christian.
diff mbox

Patch

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 696238b..f30ac9d 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -90,6 +90,7 @@  config ADB_PMU
 config ADB_PMU_LED
 	bool "Support for the Power/iBook front LED"
 	depends on ADB_PMU
+	depends on IDE_GD_ATA
 	select NEW_LEDS
 	select LEDS_CLASS
 	help