powerpc: Remove klimit

klimit is a global variable initialised at build time with the
value of _end.

This variable is never modified, so _end symbol can be used directly.

Remove klimit.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 arch/powerpc/include/asm/setup.h             | 1 -
 arch/powerpc/kernel/head_book3s_32.S         | 6 ++----
 arch/powerpc/kernel/prom.c                   | 2 +-
 arch/powerpc/kernel/setup-common.c           | 4 +---
 arch/powerpc/platforms/powermac/bootx_init.c | 2 +-
 5 files changed, 5 insertions(+), 10 deletions(-)

On 2021/6/4 17:57, Christophe Leroy wrote:
> klimit is a global variable initialised at build time with the
> value of _end.
>
> This variable is never modified, so _end symbol can be used directly.
>
> Remove klimit.
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
> ---
>   arch/powerpc/include/asm/setup.h             | 1 -
>   arch/powerpc/kernel/head_book3s_32.S         | 6 ++----
>   arch/powerpc/kernel/prom.c                   | 2 +-
>   arch/powerpc/kernel/setup-common.c           | 4 +---
>   arch/powerpc/platforms/powermac/bootx_init.c | 2 +-
>   5 files changed, 5 insertions(+), 10 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
> index e89bfebd4e00..6c1a7d217d1a 100644
> --- a/arch/powerpc/include/asm/setup.h
> +++ b/arch/powerpc/include/asm/setup.h
> @@ -10,7 +10,6 @@ extern void ppc_printk_progress(char *s, unsigned short hex);
>   extern unsigned int rtas_data;
>   extern unsigned long long memory_limit;
>   extern bool init_mem_is_free;
> -extern unsigned long klimit;
>   extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
>   
>   struct device_node;
> diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
> index 326262030279..b724e88bcdaf 100644
> --- a/arch/powerpc/kernel/head_book3s_32.S
> +++ b/arch/powerpc/kernel/head_book3s_32.S
> @@ -766,9 +766,6 @@ PerformanceMonitor:
>    * the kernel image to physical address PHYSICAL_START.
>    */
>   relocate_kernel:
> -	addis	r9,r26,klimit@ha	/* fetch klimit */
> -	lwz	r25,klimit@l(r9)
> -	addis	r25,r25,-KERNELBASE@h
>   	lis	r3,PHYSICAL_START@h	/* Destination base address */
>   	li	r6,0			/* Destination offset */
>   	li	r5,0x4000		/* # bytes of memory to copy */
> @@ -776,7 +773,8 @@ relocate_kernel:
>   	addi	r0,r3,4f@l		/* jump to the address of 4f */
>   	mtctr	r0			/* in copy and do the rest. */
>   	bctr				/* jump to the copy */
> -4:	mr	r5,r25
> +4:	lis	r5,_end-KERNELBASE@h
> +	ori	r5,r5,_end-KERNELBASE@l
>   	bl	copy_and_flush		/* copy the rest */
>   	b	turn_on_mmu
>   
> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index fbe9deebc8e1..f620e04dc9bf 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -758,7 +758,7 @@ void __init early_init_devtree(void *params)
>   		first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
>   	setup_initial_memory_limit(memstart_addr, first_memblock_size);
>   	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
> -	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
> +	memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START);
>   	/* If relocatable, reserve first 32k for interrupt vectors etc. */
>   	if (PHYSICAL_START > MEMORY_START)
>   		memblock_reserve(MEMORY_START, 0x8000);
> diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
> index 74a98fff2c2f..138bb7f49ef9 100644
> --- a/arch/powerpc/kernel/setup-common.c
> +++ b/arch/powerpc/kernel/setup-common.c
> @@ -91,8 +91,6 @@ EXPORT_SYMBOL_GPL(boot_cpuid);
>   int dcache_bsize;
>   int icache_bsize;
>   
> -unsigned long klimit = (unsigned long) _end;
> -
>   /*
>    * This still seems to be needed... -- paulus
>    */
> @@ -930,7 +928,7 @@ void __init setup_arch(char **cmdline_p)
>   	init_mm.start_code = (unsigned long)_stext;
>   	init_mm.end_code = (unsigned long) _etext;
>   	init_mm.end_data = (unsigned long) _edata;
> -	init_mm.brk = klimit;
> +	init_mm.brk = (unsigned long)_end;
>   
>   	mm_iommu_init(&init_mm);
>   	irqstack_early_init();
> diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
> index 9d4ecd292255..d20ef35e6d9d 100644
> --- a/arch/powerpc/platforms/powermac/bootx_init.c
> +++ b/arch/powerpc/platforms/powermac/bootx_init.c
> @@ -433,7 +433,7 @@ static void __init btext_welcome(boot_infos_t *bi)
>   	bootx_printf("\nframe buffer at  : 0x%x", bi->dispDeviceBase);
>   	bootx_printf(" (phys), 0x%x", bi->logicalDisplayBase);
>   	bootx_printf(" (log)");
> -	bootx_printf("\nklimit           : 0x%x",(unsigned long)klimit);
> +	bootx_printf("\nklimit           : 0x%x",(unsigned long)_end);
>   	bootx_printf("\nboot_info at     : 0x%x", bi);
>   	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
>   	bootx_printf("\nMSR              : 0x%x", flags);

On Fri, 4 Jun 2021 09:57:36 +0000 (UTC), Christophe Leroy wrote:
> klimit is a global variable initialised at build time with the
> value of _end.
> 
> This variable is never modified, so _end symbol can be used directly.
> 
> Remove klimit.

Applied to powerpc/next.

[1/1] powerpc: Remove klimit
      https://git.kernel.org/powerpc/c/56afad885228902d090558a0b1cf75e9809e831d

cheers