@@ -143,6 +143,8 @@ static __always_inline void update_user_segments(u32 val)
update_user_segment(15, val);
}
+int find_free_bat(void);
+unsigned int bat_block_size(unsigned long base, unsigned long top);
#endif /* !__ASSEMBLY__ */
/* We happily ignore the smaller BATs on 601, we don't actually use
@@ -76,7 +76,7 @@ unsigned long p_block_mapped(phys_addr_t pa)
return 0;
}
-static int find_free_bat(void)
+int find_free_bat(void)
{
int b;
int n = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4;
@@ -100,7 +100,7 @@ static int find_free_bat(void)
* - block size has to be a power of two. This is calculated by finding the
* highest bit set to 1.
*/
-static unsigned int block_size(unsigned long base, unsigned long top)
+unsigned int bat_block_size(unsigned long base, unsigned long top)
{
unsigned int max_size = SZ_256M;
unsigned int base_shift = (ffs(base) - 1) & 31;
@@ -145,7 +145,7 @@ static unsigned long __init __mmu_mapin_ram(unsigned long base, unsigned long to
int idx;
while ((idx = find_free_bat()) != -1 && base != top) {
- unsigned int size = block_size(base, top);
+ unsigned int size = bat_block_size(base, top);
if (size < 128 << 10)
break;
@@ -204,12 +204,12 @@ void mmu_mark_initmem_nx(void)
unsigned long size;
for (i = 0; i < nb - 1 && base < top && top - base > (128 << 10);) {
- size = block_size(base, top);
+ size = bat_block_size(base, top);
setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
base += size;
}
if (base < top) {
- size = block_size(base, top);
+ size = bat_block_size(base, top);
size = max(size, 128UL << 10);
if ((top - base) > size) {
size <<= 1;
@@ -10,47 +10,51 @@ int __init kasan_init_region(void *start, size_t size)
{
unsigned long k_start = (unsigned long)kasan_mem_to_shadow(start);
unsigned long k_end = (unsigned long)kasan_mem_to_shadow(start + size);
- unsigned long k_cur = k_start;
- int k_size = k_end - k_start;
- int k_size_base = 1 << (ffs(k_size) - 1);
+ unsigned long k_nobat = k_start;
+ unsigned long k_cur;
+ phys_addr_t phys;
int ret;
- void *block;
- block = memblock_alloc(k_size, k_size_base);
-
- if (block && k_size_base >= SZ_128K && k_start == ALIGN(k_start, k_size_base)) {
- int k_size_more = 1 << (ffs(k_size - k_size_base) - 1);
-
- setbat(-1, k_start, __pa(block), k_size_base, PAGE_KERNEL);
- if (k_size_more >= SZ_128K)
- setbat(-1, k_start + k_size_base, __pa(block) + k_size_base,
- k_size_more, PAGE_KERNEL);
- if (v_block_mapped(k_start))
- k_cur = k_start + k_size_base;
- if (v_block_mapped(k_start + k_size_base))
- k_cur = k_start + k_size_base + k_size_more;
-
- update_bats();
+ while (k_nobat < k_end) {
+ unsigned int k_size = bat_block_size(k_nobat, k_end);
+ int idx = find_free_bat();
+
+ if (idx == -1)
+ break;
+ if (k_size < SZ_128K)
+ break;
+ phys = memblock_phys_alloc_range(k_size, k_size, 0,
+ MEMBLOCK_ALLOC_ANYWHERE);
+ if (!phys)
+ break;
+
+ setbat(idx, k_nobat, phys, k_size, PAGE_KERNEL);
+ k_nobat += k_size;
}
+ if (k_nobat != k_start)
+ update_bats();
- if (!block)
- block = memblock_alloc(k_size, PAGE_SIZE);
- if (!block)
- return -ENOMEM;
+ if (k_nobat < k_end) {
+ phys = memblock_phys_alloc_range(k_end - k_nobat, PAGE_SIZE, 0,
+ MEMBLOCK_ALLOC_ANYWHERE);
+ if (!phys)
+ return -ENOMEM;
+ }
ret = kasan_init_shadow_page_tables(k_start, k_end);
if (ret)
return ret;
- kasan_update_early_region(k_start, k_cur, __pte(0));
+ kasan_update_early_region(k_start, k_nobat, __pte(0));
- for (; k_cur < k_end; k_cur += PAGE_SIZE) {
+ for (k_cur = k_nobat; k_cur < k_end; k_cur += PAGE_SIZE) {
pmd_t *pmd = pmd_off_k(k_cur);
- void *va = block + k_cur - k_start;
- pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);
+ pte_t pte = pfn_pte(PHYS_PFN(phys + k_cur - k_nobat), PAGE_KERNEL);
__set_pte_at(&init_mm, k_cur, pte_offset_kernel(pmd, k_cur), pte, 0);
}
flush_tlb_kernel_range(k_start, k_end);
+ memset(kasan_mem_to_shadow(start), 0, k_end - k_start);
+
return 0;
}
It has been reported some configuration where the kernel doesn't boot with KASAN enabled. This is due to wrong BAT allocation for the KASAN area: ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m 3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m 4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m A BAT must have both virtual and physical addresses alignment matching the size of the BAT. This is not the case for BAT 4 above. Fix kasan_init_region() by using block_size() function that is in book3s32/mmu.c. To be able to reuse it here, make it non static and change its name to bat_block_size() in order to avoid name conflict with block_size() defined in <linux/blkdev.h> Also reuse find_free_bat() to avoid an error message from setbat() when no BAT is available. And allocate memory outside of linear memory mapping to avoid wasting that precious space. With this change we get correct alignment for BATs and KASAN shadow memory is allocated outside the linear memory space. ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw 3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw 4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw Reported-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- v2: - Allocate kasan shadow memory outside precious kernel linear memory - Properly zeroise kasan shadow memory --- arch/powerpc/include/asm/book3s/32/mmu-hash.h | 2 + arch/powerpc/mm/book3s32/mmu.c | 10 ++-- arch/powerpc/mm/kasan/book3s_32.c | 58 ++++++++++--------- 3 files changed, 38 insertions(+), 32 deletions(-)