Message ID | 6192bddc4631d2691b98316908432ffabc5d4b40.1567188299.git.msuchanek@suse.de (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Disable compat cruft on ppc64le v6 | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/apply_patch | warning | Failed to apply on branch next (6ed37b3ef6aef8647b8dad925affa92c4c8cc8a3) |
snowpatch_ozlabs/apply_patch | fail | Failed to apply to any branch |
Le 30/08/2019 à 20:57, Michal Suchanek a écrit : > There are numerous references to 32bit functions in generic and 64bit > code so ifdef them out. > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > --- > v2: > - fix 32bit ifdef condition in signal.c > - simplify the compat ifdef condition in vdso.c - 64bit is redundant > - simplify the compat ifdef condition in callchain.c - 64bit is redundant > v3: > - use IS_ENABLED and maybe_unused where possible > - do not ifdef declarations > - clean up Makefile > v4: > - further makefile cleanup > - simplify is_32bit_task conditions > - avoid ifdef in condition by using return > v5: > - avoid unreachable code on 32bit > - make is_current_64bit constant on !COMPAT > - add stub perf_callchain_user_32 to avoid some ifdefs > v6: > - consolidate current_is_64bit > --- > arch/powerpc/include/asm/thread_info.h | 4 +-- > arch/powerpc/kernel/Makefile | 7 +++-- > arch/powerpc/kernel/entry_64.S | 2 ++ > arch/powerpc/kernel/signal.c | 3 +-- > arch/powerpc/kernel/syscall_64.c | 6 ++--- > arch/powerpc/kernel/vdso.c | 5 ++-- > arch/powerpc/perf/callchain.c | 37 +++++++++++++++----------- > 7 files changed, 33 insertions(+), 31 deletions(-) > [...] > diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c > index b7cdcce20280..788ad2c63f18 100644 > --- a/arch/powerpc/perf/callchain.c > +++ b/arch/powerpc/perf/callchain.c > @@ -15,7 +15,7 @@ > #include <asm/sigcontext.h> > #include <asm/ucontext.h> > #include <asm/vdso.h> > -#ifdef CONFIG_PPC64 > +#ifdef CONFIG_COMPAT > #include "../kernel/ppc32.h" > #endif > #include <asm/pte-walk.h> > @@ -268,16 +268,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, > } > } > > -static inline int current_is_64bit(void) > -{ > - /* > - * We can't use test_thread_flag() here because we may be on an > - * interrupt stack, and the thread flags don't get copied over > - * from the thread_info on the main stack to the interrupt stack. > - */ > - return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); > -} > - > #else /* CONFIG_PPC64 */ > static int read_user_stack_slow(void __user *ptr, void *buf, int nb) > { > @@ -314,11 +304,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry > { > } > > -static inline int current_is_64bit(void) > -{ > - return 0; > -} > - > static inline int valid_user_sp(unsigned long sp, int is_64) > { > if (!sp || (sp & 7) || sp > TASK_SIZE - 32) > @@ -334,6 +319,7 @@ static inline int valid_user_sp(unsigned long sp, int is_64) > > #endif /* CONFIG_PPC64 */ > > +#if defined(CONFIG_PPC32) || defined(CONFIG_COMPAT) > /* > * Layout for non-RT signal frames > */ > @@ -475,6 +461,25 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, > sp = next_sp; > } > } > +#else /* 32bit */ > +static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, > + struct pt_regs *regs) > +{ > + (void)&read_user_stack_32; /* unused if !COMPAT */ You don't need that anymore do you ? Christophe > +} > +#endif /* 32bit */ > + > +static inline int current_is_64bit(void) > +{ > + if (!IS_ENABLED(CONFIG_COMPAT)) > + return IS_ENABLED(CONFIG_PPC64); > + /* > + * We can't use test_thread_flag() here because we may be on an > + * interrupt stack, and the thread flags don't get copied over > + * from the thread_info on the main stack to the interrupt stack. > + */ > + return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); > +} > > void > perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) >
On Fri, 30 Aug 2019 22:21:09 +0200 Christophe Leroy <christophe.leroy@c-s.fr> wrote: > Le 30/08/2019 à 20:57, Michal Suchanek a écrit : > > There are numerous references to 32bit functions in generic and 64bit > > code so ifdef them out. > > > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > > --- > > v2: > > - fix 32bit ifdef condition in signal.c > > - simplify the compat ifdef condition in vdso.c - 64bit is redundant > > - simplify the compat ifdef condition in callchain.c - 64bit is redundant > > v3: > > - use IS_ENABLED and maybe_unused where possible > > - do not ifdef declarations > > - clean up Makefile > > v4: > > - further makefile cleanup > > - simplify is_32bit_task conditions > > - avoid ifdef in condition by using return > > v5: > > - avoid unreachable code on 32bit > > - make is_current_64bit constant on !COMPAT > > - add stub perf_callchain_user_32 to avoid some ifdefs > > v6: > > - consolidate current_is_64bit > > --- > > arch/powerpc/include/asm/thread_info.h | 4 +-- > > arch/powerpc/kernel/Makefile | 7 +++-- > > arch/powerpc/kernel/entry_64.S | 2 ++ > > arch/powerpc/kernel/signal.c | 3 +-- > > arch/powerpc/kernel/syscall_64.c | 6 ++--- > > arch/powerpc/kernel/vdso.c | 5 ++-- > > arch/powerpc/perf/callchain.c | 37 +++++++++++++++----------- > > 7 files changed, 33 insertions(+), 31 deletions(-) > > > > [...] > > > diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c > > index b7cdcce20280..788ad2c63f18 100644 > > --- a/arch/powerpc/perf/callchain.c > > +++ b/arch/powerpc/perf/callchain.c > > @@ -15,7 +15,7 @@ > > #include <asm/sigcontext.h> > > #include <asm/ucontext.h> > > #include <asm/vdso.h> > > -#ifdef CONFIG_PPC64 > > +#ifdef CONFIG_COMPAT > > #include "../kernel/ppc32.h" > > #endif > > #include <asm/pte-walk.h> > > @@ -268,16 +268,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, > > } > > } > > > > -static inline int current_is_64bit(void) > > -{ > > - /* > > - * We can't use test_thread_flag() here because we may be on an > > - * interrupt stack, and the thread flags don't get copied over > > - * from the thread_info on the main stack to the interrupt stack. > > - */ > > - return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); > > -} > > - > > #else /* CONFIG_PPC64 */ > > static int read_user_stack_slow(void __user *ptr, void *buf, int nb) > > { > > @@ -314,11 +304,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry > > { > > } > > > > -static inline int current_is_64bit(void) > > -{ > > - return 0; > > -} > > - > > static inline int valid_user_sp(unsigned long sp, int is_64) > > { > > if (!sp || (sp & 7) || sp > TASK_SIZE - 32) > > @@ -334,6 +319,7 @@ static inline int valid_user_sp(unsigned long sp, int is_64) > > > > #endif /* CONFIG_PPC64 */ > > > > +#if defined(CONFIG_PPC32) || defined(CONFIG_COMPAT) > > /* > > * Layout for non-RT signal frames > > */ > > @@ -475,6 +461,25 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, > > sp = next_sp; > > } > > } > > +#else /* 32bit */ > > +static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, > > + struct pt_regs *regs) > > +{ > > + (void)&read_user_stack_32; /* unused if !COMPAT */ > > You don't need that anymore do you ? Yes, this part is not needed. It was removed later anyway but this state is broken. Thanks Michal > > Christophe > > > +} > > +#endif /* 32bit */ > > + > > +static inline int current_is_64bit(void) > > +{ > > + if (!IS_ENABLED(CONFIG_COMPAT)) > > + return IS_ENABLED(CONFIG_PPC64); > > + /* > > + * We can't use test_thread_flag() here because we may be on an > > + * interrupt stack, and the thread flags don't get copied over > > + * from the thread_info on the main stack to the interrupt stack. > > + */ > > + return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); > > +} > > > > void > > perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) > >
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 8e1d0195ac36..c128d8a48ea3 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -144,10 +144,10 @@ static inline bool test_thread_local_flags(unsigned int flags) return (ti->local_flags & flags) != 0; } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_COMPAT #define is_32bit_task() (test_thread_flag(TIF_32BIT)) #else -#define is_32bit_task() (1) +#define is_32bit_task() (IS_ENABLED(CONFIG_PPC32)) #endif #if defined(CONFIG_PPC64) diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1d646a94d96c..9d8772e863b9 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -44,16 +44,15 @@ CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING endif obj-y := cputable.o ptrace.o syscalls.o \ - irq.o align.o signal_32.o pmc.o vdso.o \ + irq.o align.o signal_$(BITS).o pmc.o vdso.o \ process.o systbl.o idle.o \ signal.o sysfs.o cacheinfo.o time.o \ prom.o traps.o setup-common.o \ udbg.o misc.o io.o misc_$(BITS).o \ of_platform.o prom_parse.o -obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ - signal_64.o ptrace32.o \ - paca.o nvram_64.o firmware.o \ +obj-$(CONFIG_PPC64) += setup_64.o paca.o nvram_64.o firmware.o \ syscall_64.o +obj-$(CONFIG_COMPAT) += sys_ppc32.o ptrace32.o signal_32.o obj-$(CONFIG_VDSO32) += vdso32/ obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 2ec825a85f5b..a2dbf216f607 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -51,8 +51,10 @@ SYS_CALL_TABLE: .tc sys_call_table[TC],sys_call_table +#ifdef CONFIG_COMPAT COMPAT_SYS_CALL_TABLE: .tc compat_sys_call_table[TC],compat_sys_call_table +#endif /* This value is used to mark exception frames on the stack. */ exception_marker: diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 60436432399f..61678cb0e6a1 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -247,7 +247,6 @@ static void do_signal(struct task_struct *tsk) sigset_t *oldset = sigmask_to_save(); struct ksignal ksig = { .sig = 0 }; int ret; - int is32 = is_32bit_task(); BUG_ON(tsk != current); @@ -277,7 +276,7 @@ static void do_signal(struct task_struct *tsk) rseq_signal_deliver(&ksig, tsk->thread.regs); - if (is32) { + if (is_32bit_task()) { if (ksig.ka.sa.sa_flags & SA_SIGINFO) ret = handle_rt_signal32(&ksig, oldset, tsk); else diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c index 98ed970796d5..0d5cbbe54cf1 100644 --- a/arch/powerpc/kernel/syscall_64.c +++ b/arch/powerpc/kernel/syscall_64.c @@ -38,7 +38,6 @@ typedef long (*syscall_fn)(long, long, long, long, long, long); long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, unsigned long r0, struct pt_regs *regs) { - unsigned long ti_flags; syscall_fn f; BUG_ON(!(regs->msr & MSR_PR)); @@ -83,8 +82,7 @@ long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, */ regs->softe = IRQS_ENABLED; - ti_flags = current_thread_info()->flags; - if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) { + if (unlikely(current_thread_info()->flags & _TIF_SYSCALL_DOTRACE)) { /* * We use the return value of do_syscall_trace_enter() as the * syscall number. If the syscall was rejected for any reason @@ -100,7 +98,7 @@ long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, /* May be faster to do array_index_nospec? */ barrier_nospec(); - if (unlikely(ti_flags & _TIF_32BIT)) { + if (unlikely(is_32bit_task())) { f = (void *)compat_sys_call_table[r0]; r3 &= 0x00000000ffffffffULL; diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index d60598113a9f..6d4a077f74d6 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -667,9 +667,7 @@ static void __init vdso_setup_syscall_map(void) { unsigned int i; extern unsigned long *sys_call_table; -#ifdef CONFIG_PPC64 extern unsigned long *compat_sys_call_table; -#endif extern unsigned long sys_ni_syscall; @@ -678,7 +676,8 @@ static void __init vdso_setup_syscall_map(void) if (sys_call_table[i] != sys_ni_syscall) vdso_data->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f); - if (compat_sys_call_table[i] != sys_ni_syscall) + if (IS_ENABLED(CONFIG_COMPAT) && + compat_sys_call_table[i] != sys_ni_syscall) vdso_data->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f); #else /* CONFIG_PPC64 */ diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c index b7cdcce20280..788ad2c63f18 100644 --- a/arch/powerpc/perf/callchain.c +++ b/arch/powerpc/perf/callchain.c @@ -15,7 +15,7 @@ #include <asm/sigcontext.h> #include <asm/ucontext.h> #include <asm/vdso.h> -#ifdef CONFIG_PPC64 +#ifdef CONFIG_COMPAT #include "../kernel/ppc32.h" #endif #include <asm/pte-walk.h> @@ -268,16 +268,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, } } -static inline int current_is_64bit(void) -{ - /* - * We can't use test_thread_flag() here because we may be on an - * interrupt stack, and the thread flags don't get copied over - * from the thread_info on the main stack to the interrupt stack. - */ - return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); -} - #else /* CONFIG_PPC64 */ static int read_user_stack_slow(void __user *ptr, void *buf, int nb) { @@ -314,11 +304,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int current_is_64bit(void) -{ - return 0; -} - static inline int valid_user_sp(unsigned long sp, int is_64) { if (!sp || (sp & 7) || sp > TASK_SIZE - 32) @@ -334,6 +319,7 @@ static inline int valid_user_sp(unsigned long sp, int is_64) #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_PPC32) || defined(CONFIG_COMPAT) /* * Layout for non-RT signal frames */ @@ -475,6 +461,25 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, sp = next_sp; } } +#else /* 32bit */ +static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, + struct pt_regs *regs) +{ + (void)&read_user_stack_32; /* unused if !COMPAT */ +} +#endif /* 32bit */ + +static inline int current_is_64bit(void) +{ + if (!IS_ENABLED(CONFIG_COMPAT)) + return IS_ENABLED(CONFIG_PPC64); + /* + * We can't use test_thread_flag() here because we may be on an + * interrupt stack, and the thread flags don't get copied over + * from the thread_info on the main stack to the interrupt stack. + */ + return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); +} void perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
There are numerous references to 32bit functions in generic and 64bit code so ifdef them out. Signed-off-by: Michal Suchanek <msuchanek@suse.de> --- v2: - fix 32bit ifdef condition in signal.c - simplify the compat ifdef condition in vdso.c - 64bit is redundant - simplify the compat ifdef condition in callchain.c - 64bit is redundant v3: - use IS_ENABLED and maybe_unused where possible - do not ifdef declarations - clean up Makefile v4: - further makefile cleanup - simplify is_32bit_task conditions - avoid ifdef in condition by using return v5: - avoid unreachable code on 32bit - make is_current_64bit constant on !COMPAT - add stub perf_callchain_user_32 to avoid some ifdefs v6: - consolidate current_is_64bit --- arch/powerpc/include/asm/thread_info.h | 4 +-- arch/powerpc/kernel/Makefile | 7 +++-- arch/powerpc/kernel/entry_64.S | 2 ++ arch/powerpc/kernel/signal.c | 3 +-- arch/powerpc/kernel/syscall_64.c | 6 ++--- arch/powerpc/kernel/vdso.c | 5 ++-- arch/powerpc/perf/callchain.c | 37 +++++++++++++++----------- 7 files changed, 33 insertions(+), 31 deletions(-)