@@ -886,25 +886,25 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
/* Default: read HW settings */
if (flow_type == IRQ_TYPE_DEFAULT) {
- switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
- MPIC_INFO(VECPRI_SENSE_MASK))) {
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_EDGE_RISING;
- break;
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_EDGE_FALLING;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_LEVEL_HIGH;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_LEVEL_LOW;
- break;
- }
+ int vold_ps;
+
+ vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+ MPIC_INFO(VECPRI_SENSE_MASK));
+
+ if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_EDGE_RISING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_EDGE_FALLING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_LEVEL_HIGH;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+ else
+ WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold);
}
/* Apply to irq desc */
Commit 446f6d06fab0b49c61887ecbe8286d6aaa796637 ("powerpc/mpic: Properly set default triggers") breaks the mpc7447_hpc_defconfig as follows: CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type': arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant Looking at the cpp output (gcc 4.7.3), I see: case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] | mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]: The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set for this platform, thus enabling the following: ------------------- #ifdef CONFIG_MPIC_WEIRD static u32 mpic_infos[][MPIC_IDX_END] = { [0] = { /* Original OpenPIC compatible MPIC */ [...] #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] #else /* CONFIG_MPIC_WEIRD */ #define MPIC_INFO(name) MPIC_##name #endif /* CONFIG_MPIC_WEIRD */ ------------------- Here we convert the case section to if/else if, and also add the equivalent of a default case to warn about unknown types. Boot tested on sbc8548, build tested on all defconfigs. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/powerpc/sysdev/mpic.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-)